Commit Graph

170 Commits

Author SHA1 Message Date
Christoph Lameter
114e9e89e6 slub: Drop DEFAULT_MAX_ORDER / DEFAULT_MIN_OBJECTS
We can now fallback to order 0 slabs. So set the slub_max_order to
PAGE_CACHE_ORDER_COSTLY but keep the slub_min_objects at 4. This
will mostly preserve the orders used in 2.6.25. F.e. The 2k kmalloc slab
will use order 1 allocs and the 4k kmalloc slab order 2.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
2008-04-27 18:28:39 +03:00
Christoph Lameter
31d33baf36 slub: Simplify any_slab_object checks
Since we now have total_objects counter per node use that to
check for the presence of any objects. The loop over all cpu slabs
is not that useful since any cpu slab would require an object allocation
first. So drop that.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
2008-04-27 18:28:18 +03:00
Christoph Lameter
06b285dc3d slub: Make the order configurable for each slab cache
Makes /sys/kernel/slab/<slabname>/order writable. The allocation
order of a slab cache can then be changed dynamically during runtime.
This can be used to override the objects per slabs value establisheed
with the slub_min_objects setting that was manually specified or
calculated on bootup.

The changes of the slab order can occur while allocate_slab() runs.
Allocate slab needs the order and the number of slab objects that
are both changed by the change of order. Both are put into
a single word (struct kmem_cache_order_objects). They can then
be atomically updated and retrieved.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
2008-04-27 18:28:18 +03:00
Christoph Lameter
319d1e2406 slub: Drop fallback to page allocator method
There is now a generic method of falling back to a slab page of minimal
order. No need anymore for the fallback to kmalloc_large().

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
2008-04-27 18:28:18 +03:00
Christoph Lameter
65c3376aac slub: Fallback to minimal order during slab page allocation
If any higher order allocation fails then fall back the smallest order
necessary to contain at least one object. This enables fallback for all
allocations to order 0 pages. The fallback will waste more memory (objects
will not fit neatly) and the fallback slabs will be not as efficient as larger
slabs since they contain less objects.

Note that SLAB also depends on order 1 allocations for some slabs that waste
too much memory if forced into PAGE_SIZE'd page. SLUB now can now deal with
failing order 1 allocs which SLAB cannot do.

Add a new field min that will contain the objects for the smallest possible order
for a slab cache.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
2008-04-27 18:28:18 +03:00
Christoph Lameter
205ab99dd1 slub: Update statistics handling for variable order slabs
Change the statistics to consider that slabs of the same slabcache
can have different number of objects in them since they may be of
different order.

Provide a new sysfs field

	total_objects

which shows the total objects that the allocated slabs of a slabcache
could hold.

Add a max field that holds the largest slab order that was ever used
for a slab cache.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
2008-04-27 18:28:17 +03:00
Christoph Lameter
834f3d1192 slub: Add kmem_cache_order_objects struct
Pack the order and the number of objects into a single word.
This saves some memory in the kmem_cache_structure and more importantly
allows us to fetch both values atomically.

Later the slab orders become runtime configurable and we need to fetch these
two items together in order to properly allocate a slab and initialize its
objects.

Fix the race by fetching the order and the number of objects in one word.

[penberg@cs.helsinki.fi: fix memset() page order in new_slab()]
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
2008-04-27 18:28:17 +03:00
Christoph Lameter
224a88be40 slub: for_each_object must be passed the number of objects in a slab
Pass the number of objects to the for_each_object macro. Most of these are
debug related.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
2008-04-27 18:28:17 +03:00
Christoph Lameter
39b264641a slub: Store max number of objects in the page struct.
Split the inuse field up to be able to store the number of objects in this
page in the page struct as well. Necessary if we want to have pages of
various orders for a slab. Also avoids touching struct kmem_cache cachelines in
__slab_alloc().

Update diagnostic code to check the number of objects and make sure that
the number of objects always stays within the bounds of a 16 bit unsigned
integer.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
2008-04-27 18:28:16 +03:00
Christoph Lameter
33b12c3813 slub: Dump list of objects not freed on kmem_cache_close()
Dump a list of unfreed objects if a slab cache is closed but
objects still remain.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
2008-04-27 18:27:37 +03:00
Christoph Lameter
599870b175 slub: free_list() cleanup
free_list looked a bit screwy so here is an attempt to clean it up.

free_list is is only used for freeing partial lists. We do not need to return a
parameter if we decrement nr_partial within the function which allows a
simplification of the whole thing.

The current version modifies nr_partial outside of the list_lock which is
technically not correct. It was only ok because we should be the only user of
this slab cache at this point.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
2008-04-27 18:26:18 +03:00
Pekka Enberg
d629d81957 slub: improve kmem_cache_destroy() error message
As pointed out by Ingo, the SLUB warning of calling kmem_cache_destroy()
with cache that still has objects triggers in practice. So turn this
WARN_ON() into a nice SLUB specific error message to avoid people
confusing it to a SLUB bug.

Cc: Ingo Molnar <mingo@elte.hu>
Acked-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
2008-04-27 18:26:06 +03:00
Christoph Lameter
3dc5063786 slab_err: Pass parameters correctly to slab_bug
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-23 12:47:48 -07:00
Christoph Lameter
0f389ec630 slub: No need for per node slab counters if !SLUB_DEBUG
The per node counters are used mainly for showing data through the sysfs API.
If that API is not compiled in then there is no point in keeping track of this
data. Disable counters for the number of slabs and the number of total slabs
if !SLUB_DEBUG. Incrementing the per node counters is also accessing a
potentially contended cacheline so this could actually be a performance
benefit to embedded systems.

SLABINFO support is also affected. It now must depends on SLUB_DEBUG (which
is on by default).

Patch also avoids a check for a NULL kmem_cache_node pointer in new_slab()
if the system is not compiled with NUMA support.

[penberg@cs.helsinki.fi: fix oops and move ->nr_slabs into CONFIG_SLUB_DEBUG]
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
2008-04-14 18:53:02 +03:00
Christoph Lameter
49bd5221ce slub: Move map/flag clearing to __free_slab
__free_slab does some diagnostics. The resetting of mapcount etc
in discard_slab() can interfere with debug processing. So move
the reset immediately before the page is freed.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
2008-04-14 18:52:18 +03:00
Christoph Lameter
50ef37b96c slub: Fixes to per cpu stat output in sysfs
Only output per cpu stats if the kernel is build for SMP.

Use a capital "C" as a leading character for the processor number
(same as the numa statistics that also use a capital letter "N").

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
2008-04-14 18:52:05 +03:00
Christoph Lameter
5b06c853ad slub: Deal with config variable dependencies
count_partial() is used by both slabinfo and the sysfs proc support. Move
the function directly before the beginning of the sysfs code so that it can
be easily found. Rework the preprocessor conditional to take into account
that slub sysfs support depends on CONFIG_SYSFS *and* CONFIG_SLUB_DEBUG.

Make CONFIG_SLUB_STATS depend on CONFIG_SLUB_DEBUG and CONFIG_SYSFS. There
is no point of keeping statistics if no one can restrive them.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
2008-04-14 18:51:34 +03:00
Christoph Lameter
4097d60175 slub: Reduce #ifdef ZONE_DMA by moving kmalloc_caches_dma near dma logic
Move the definition of kmalloc_caches_dma() into a later #ifdef CONFIG_ZONE_DMA.
This saves one #ifdef and leaves us with a total of two #ifdefs for dma slab support.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
2008-04-14 18:51:18 +03:00
Pekka Enberg
62f75532b5 slub: Initialize per-cpu stats
As spotted by kmemcheck, we need to initialize the per-CPU ->stat array before
using it.

[kmem_cache_cpu structures are usually allocated from arrays defined via
DEFINE_PER_CPU that are zeroed so we have not noticed this so far --cl].

Reported-by: Vegard Nossum <vegard.nossum@gmail.com>
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
2008-04-14 18:50:44 +03:00
Christoph Lameter
00460dd5f4 Fix undefined count_partial if !CONFIG_SLABINFO
Small typo in the patch recently merged to avoid the unused symbol
message for count_partial(). Discussion thread with confirmation of fix at
http://marc.info/?t=120696854400001&r=1&w=2

Typo in the check if we need the count_partial function that was
introduced by 53625b4204

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-01 12:44:06 -07:00
Linus Torvalds
e72e9c23ee Revert "SLUB: remove useless masking of GFP_ZERO"
This reverts commit 3811dbf671.

The masking was not at all useless, and it was sensible.  We handle
GFP_ZERO in the caller, and passing it down to any page allocator logic
is buggy and wrong.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-27 20:56:33 -07:00
Christoph Lameter
53625b4204 count_partial() is not used if !SLUB_DEBUG and !CONFIG_SLABINFO
Avoid warnings about unused functions if neither SLUB_DEBUG nor CONFIG_SLABINFO
is defined. This patch will be reversed when slab defrag is merged since slab
defrag requires count_partial() to determine the fragmentation status of
slab caches.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
2008-03-26 10:42:28 -07:00
Christoph Lameter
caeab084de slub page alloc fallback: Enable interrupts for GFP_WAIT.
The fallback path needs to enable interrupts like done for
the other page allocator calls. This was not necessary with
the alternate fast path since we handled irq enable/disable in
the slow path. The regular fastpath handles irq enable/disable
around calls to the slow path so we need to restore the proper
status before calling the page allocator from the slowpath.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
2008-03-17 11:14:17 -07:00
Nick Piggin
b621038678 slub: Do not cross cacheline boundaries for very small objects
SLUB should pack even small objects nicely into cachelines if that is what
has been asked for. Use the same algorithm as SLAB for this.

The effect of this patch for a system with a cacheline size of 64
bytes is that the 24 byte sized slab caches will now put exactly
2 objects into a cacheline instead of 3 with some overlap into
the next cacheline. This reduces the object density in a 4k slab
from 170 to 128 objects (same as SLAB).

Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Christoph Lameter <clameter@sgi.com>
2008-03-06 16:21:50 -08:00
Christoph Lameter
b773ad7369 slub statistics: Fix check for DEACTIVATE_REMOTE_FREES
The remote frees are in the freelist of the page and not in the
percpu freelist.

Reviewed-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Christoph Lameter <clameter@sgi.com>
2008-03-06 16:21:49 -08:00
Cyrill Gorcunov
62e5c4b4d6 slub: fix possible NULL pointer dereference
This patch fix possible NULL pointer dereference if kzalloc
failed. To be able to return proper error code the function
return type is changed to ssize_t (according to callees and
sysfs definitions).

Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
Signed-off-by: Christoph Lameter <clameter@sgi.com>
2008-03-03 12:22:32 -08:00
Christoph Lameter
f619cfe1bd slub: Add kmalloc_large_node() to support kmalloc_node fallback
Slub is missing some NUMA support for large kmallocs. Provide that.

Reviewed-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Christoph Lameter <clameter@sgi.com>
2008-03-03 12:22:32 -08:00
Pekka J Enberg
7693143481 slub: look up object from the freelist once
We only need to look up object from c->page->freelist once in
__slab_alloc().

Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Christoph Lameter <clameter@sgi.com>
2008-03-03 12:22:32 -08:00
Christoph Lameter
6446faa2ff slub: Fix up comments
Provide comments and fix up various spelling / style issues.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
2008-03-03 12:22:32 -08:00
Christoph Lameter
d8b42bf54b slub: Rearrange #ifdef CONFIG_SLUB_DEBUG in calculate_sizes()
Group SLUB_DEBUG code together to reduce the number of #ifdefs. Move some
debug checks under the #ifdef.

Reviewed-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Christoph Lameter <clameter@sgi.com>
2008-03-03 12:22:31 -08:00
Christoph Lameter
ae20bfda68 slub: Remove BUG_ON() from ksize and omit checks for !SLUB_DEBUG
The BUG_ONs are useless since the pointer derefs will lead to
NULL deref errors anyways. Some of the checks are not necessary
if no debugging is possible.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
2008-03-03 12:22:31 -08:00
Christoph Lameter
27d9e4e948 slub: Use the objsize from the kmem_cache_cpu structure
No need to access the kmem_cache structure. We have the same value
in kmem_cache_cpu.

Reviewed-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Christoph Lameter <clameter@sgi.com>
2008-03-03 12:22:31 -08:00
Christoph Lameter
d692ef6dcd slub: Remove useless checks in alloc_debug_processing
Alloc debug processing is never called with a NULL object pointer.
No reason to check for NULL.

Reviewed-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Christoph Lameter <clameter@sgi.com>
2008-03-03 12:22:31 -08:00
Christoph Lameter
e153362a50 slub: Remove objsize check in kmem_cache_flags()
There is no page->offset anymore and also no associated limit on the number
of objects. The page->offset field was removed for 2.6.24. So the check
in kmem_cache_flags() is now also obsolete (should have been dropped
earlier, somehow a hunk vanished).

Reviewed-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-by: Christoph Lameter <clameter@sgi.com>
2008-03-03 12:22:30 -08:00
Christoph Lameter
d9acf4b7b6 slub: rename slab_objects to show_slab_objects
The sysfs callback is better named show_slab_objects since it is always
called from the xxx_show callbacks. We need the name for other purposes
later.

Reviewed-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Christoph Lameter <clameter@sgi.com>
2008-03-03 12:22:30 -08:00
Christoph Lameter
a973e9dd1e Revert "unique end pointer" patch
This only made sense for the alternate fastpath which was reverted last week.

Mathieu is working on a new version that addresses the fastpath issues but that
new code first needs to go through mm and it is not clear if we need the
unique end pointers with his new scheme.

Reviewed-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Christoph Lameter <clameter@sgi.com>
2008-03-03 12:22:30 -08:00
Linus Torvalds
00e962c540 Revert "SLUB: Alternate fast paths using cmpxchg_local"
This reverts commit 1f84260c8c, which is
suspected to be the reason for some very occasional and hard-to-trigger
crashes that usually look related to memory allocation (mostly reported
in networking, but since that's generally the most common source of
shortlived allocations - and allocations in interrupt contexts - that in
itself is not a big clue).

See for example
	http://bugzilla.kernel.org/show_bug.cgi?id=9973
	http://lkml.org/lkml/2008/2/19/278
etc.

One promising suspicion for what the root cause of bug is (which also
explains why it's so hard to trigger in practice) came from Eric
Dumazet:

   "I wonder how SLUB_FASTPATH is supposed to work, since it is affected
    by a classical ABA problem of lockless algo.

    cmpxchg_local(&c->freelist, object, object[c->offset]) can succeed,
    while an interrupt came (on this cpu), and several allocations were
    done, and one free was performed at the end of this interruption, so
    'object' was recycled.

    c->freelist can then contain the previous value (object), but
    object[c->offset] was changed by IRQ.

    We then put back in freelist an already allocated object."

but another reason for the revert is simply that everybody agrees that
this code was the main suspect just by virtue of the pattern of oopses.

Cc: Torsten Kaiser <just.for.lkml@googlemail.com>
Cc: Christoph Lameter <clameter@sgi.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-19 09:08:49 -08:00
Christoph Lameter
331dc558fa slub: Support 4k kmallocs again to compensate for page allocator slowness
Currently we hand off PAGE_SIZEd kmallocs to the page allocator in the
mistaken belief that the page allocator can handle these allocations
effectively. However, measurements indicate a minimum slowdown by the
factor of 8 (and that is only SMP, NUMA is much worse) vs the slub fastpath
which causes regressions in tbench.

Increase the number of kmalloc caches by one so that we again handle 4k
kmallocs directly from slub. 4k page buffering for the page allocator
will be performed by slub like done by slab.

At some point the page allocator fastpath should be fixed. A lot of the kernel
would benefit from a faster ability to allocate a single page. If that is
done then the 4k allocs may again be forwarded to the page allocator and this
patch could be reverted.

Reviewed-by: Pekka Enberg <penberg@cs.helsinki.fi>
Acked-by: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: Christoph Lameter <clameter@sgi.com>
2008-02-14 15:30:02 -08:00
Christoph Lameter
71c7a06ff0 slub: Fallback to kmalloc_large for failing higher order allocs
Slub already has two ways of allocating an object. One is via its own
logic and the other is via the call to kmalloc_large to hand off object
allocation to the page allocator. kmalloc_large is typically used
for objects >= PAGE_SIZE.

We can use that handoff to avoid failing if a higher order kmalloc slab
allocation cannot be satisfied by the page allocator. If we reach the
out of memory path then simply try a kmalloc_large(). kfree() can
already handle the case of an object that was allocated via the page
allocator and so this will work just fine (apart from object
accounting...).

For any kmalloc slab that already requires higher order allocs (which
makes it impossible to use the page allocator fastpath!)
we just use PAGE_ALLOC_COSTLY_ORDER to get the largest number of
objects in one go from the page allocator slowpath.

On a 4k platform this patch will lead to the following use of higher
order pages for the following kmalloc slabs:

8 ... 1024	order 0
2048 .. 4096	order 3 (4k slab only after the next patch)

We may waste some space if fallback occurs on a 2k slab but we
are always able to fallback to an order 0 alloc.

Reviewed-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Christoph Lameter <clameter@sgi.com>
2008-02-14 15:30:01 -08:00
Christoph Lameter
b7a49f0d4c slub: Determine gfpflags once and not every time a slab is allocated
Currently we determine the gfp flags to pass to the page allocator
each time a slab is being allocated.

Determine the bits to be set at the time the slab is created. Store
in a new allocflags field and add the flags in allocate_slab().

Acked-by: Mel Gorman <mel@csn.ul.ie>
Reviewed-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Christoph Lameter <clameter@sgi.com>
2008-02-14 15:30:01 -08:00
Adrian Bunk
dada123d99 make slub.c:slab_address() static
slab_address() can become static.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Christoph Lameter <clameter@sgi.com>
2008-02-14 15:30:01 -08:00
Pekka Enberg
eada35efcb slub: kmalloc page allocator pass-through cleanup
This adds a proper function for kmalloc page allocator pass-through. While it
simplifies any code that does slab tracing code a lot, I think it's a
worthwhile cleanup in itself.

Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Christoph Lameter <clameter@sgi.com>
2008-02-14 15:30:01 -08:00
Ingo Molnar
3adbefee6f SLUB: fix checkpatch warnings
fix checkpatch --file mm/slub.c errors and warnings.

 $ q-code-quality-compare
                                      errors   lines of code   errors/KLOC
 mm/slub.c      [before]                  22            4204           5.2
 mm/slub.c      [after]                    0            4210             0

no code changed:

    text    data     bss     dec     hex filename
   22195    8634     136   30965    78f5 slub.o.before
   22195    8634     136   30965    78f5 slub.o.after

   md5:
     93cdfbec2d6450622163c590e1064358  slub.o.before.asm
     93cdfbec2d6450622163c590e1064358  slub.o.after.asm

[clameter: rediffed against Pekka's cleanup patch, omitted
moves of the name of a function to the start of line]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Christoph Lameter <clameter@sgi.com>
2008-02-07 17:52:39 -08:00
Nick Piggin
a76d354629 Use non atomic unlock
Slub can use the non-atomic version to unlock because other flags will not
get modified with the lock held.

Signed-off-by: Nick Piggin <npiggin@suse.de>
Acked-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2008-02-07 17:47:42 -08:00
Christoph Lameter
8ff12cfc00 SLUB: Support for performance statistics
The statistics provided here allow the monitoring of allocator behavior but
at the cost of some (minimal) loss of performance. Counters are placed in
SLUB's per cpu data structure. The per cpu structure may be extended by the
statistics to grow larger than one cacheline which will increase the cache
footprint of SLUB.

There is a compile option to enable/disable the inclusion of the runtime
statistics and its off by default.

The slabinfo tool is enhanced to support these statistics via two options:

-D 	Switches the line of information displayed for a slab from size
	mode to activity mode.

-A	Sorts the slabs displayed by activity. This allows the display of
	the slabs most important to the performance of a certain load.

-r	Report option will report detailed statistics on

Example (tbench load):

slabinfo -AD		->Shows the most active slabs

Name                   Objects    Alloc     Free   %Fast
skbuff_fclone_cache         33 111953835 111953835  99  99
:0000192                  2666  5283688  5281047  99  99
:0001024                   849  5247230  5246389  83  83
vm_area_struct            1349   119642   118355  91  22
:0004096                    15    66753    66751  98  98
:0000064                  2067    25297    23383  98  78
dentry                   10259    28635    18464  91  45
:0000080                 11004    18950     8089  98  98
:0000096                  1703    12358    10784  99  98
:0000128                   762    10582     9875  94  18
:0000512                   184     9807     9647  95  81
:0002048                   479     9669     9195  83  65
anon_vma                   777     9461     9002  99  71
kmalloc-8                 6492     9981     5624  99  97
:0000768                   258     7174     6931  58  15

So the skbuff_fclone_cache is of highest importance for the tbench load.
Pretty high load on the 192 sized slab. Look for the aliases

slabinfo -a | grep 000192
:0000192     <- xfs_btree_cur filp kmalloc-192 uid_cache tw_sock_TCP
	request_sock_TCPv6 tw_sock_TCPv6 skbuff_head_cache xfs_ili

Likely skbuff_head_cache.


Looking into the statistics of the skbuff_fclone_cache is possible through

slabinfo skbuff_fclone_cache	->-r option implied if cache name is mentioned


.... Usual output ...

Slab Perf Counter       Alloc     Free %Al %Fr
--------------------------------------------------
Fastpath             111953360 111946981  99  99
Slowpath                 1044     7423   0   0
Page Alloc                272      264   0   0
Add partial                25      325   0   0
Remove partial             86      264   0   0
RemoteObj/SlabFrozen      350     4832   0   0
Total                111954404 111954404

Flushes       49 Refill        0
Deactivate Full=325(92%) Empty=0(0%) ToHead=24(6%) ToTail=1(0%)

Looks good because the fastpath is overwhelmingly taken.


skbuff_head_cache:

Slab Perf Counter       Alloc     Free %Al %Fr
--------------------------------------------------
Fastpath              5297262  5259882  99  99
Slowpath                 4477    39586   0   0
Page Alloc                937      824   0   0
Add partial                 0     2515   0   0
Remove partial           1691      824   0   0
RemoteObj/SlabFrozen     2621     9684   0   0
Total                 5301739  5299468

Deactivate Full=2620(100%) Empty=0(0%) ToHead=0(0%) ToTail=0(0%)


Descriptions of the output:

Total:		The total number of allocation and frees that occurred for a
		slab

Fastpath:	The number of allocations/frees that used the fastpath.

Slowpath:	Other allocations

Page Alloc:	Number of calls to the page allocator as a result of slowpath
		processing

Add Partial:	Number of slabs added to the partial list through free or
		alloc (occurs during cpuslab flushes)

Remove Partial:	Number of slabs removed from the partial list as a result of
		allocations retrieving a partial slab or by a free freeing
		the last object of a slab.

RemoteObj/Froz:	How many times were remotely freed object encountered when a
		slab was about to be deactivated. Frozen: How many times was
		free able to skip list processing because the slab was in use
		as the cpuslab of another processor.

Flushes:	Number of times the cpuslab was flushed on request
		(kmem_cache_shrink, may result from races in __slab_alloc)

Refill:		Number of times we were able to refill the cpuslab from
		remotely freed objects for the same slab.

Deactivate:	Statistics how slabs were deactivated. Shows how they were
		put onto the partial list.

In general fastpath is very good. Slowpath without partial list processing is
also desirable. Any touching of partial list uses node specific locks which
may potentially cause list lock contention.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
2008-02-07 17:47:41 -08:00
Christoph Lameter
1f84260c8c SLUB: Alternate fast paths using cmpxchg_local
Provide an alternate implementation of the SLUB fast paths for alloc
and free using cmpxchg_local. The cmpxchg_local fast path is selected
for arches that have CONFIG_FAST_CMPXCHG_LOCAL set. An arch should only
set CONFIG_FAST_CMPXCHG_LOCAL if the cmpxchg_local is faster than an
interrupt enable/disable sequence. This is known to be true for both
x86 platforms so set FAST_CMPXCHG_LOCAL for both arches.

Currently another requirement for the fastpath is that the kernel is
compiled without preemption. The restriction will go away with the
introduction of a new per cpu allocator and new per cpu operations.

The advantages of a cmpxchg_local based fast path are:

1. Potentially lower cycle count (30%-60% faster)

2. There is no need to disable and enable interrupts on the fast path.
   Currently interrupts have to be disabled and enabled on every
   slab operation. This is likely avoiding a significant percentage
   of interrupt off / on sequences in the kernel.

3. The disposal of freed slabs can occur with interrupts enabled.

The alternate path is realized using #ifdef's. Several attempts to do the
same with macros and inline functions resulted in a mess (in particular due
to the strange way that local_interrupt_save() handles its argument and due
to the need to define macros/functions that sometimes disable interrupts
and sometimes do something else).

[clameter: Stripped preempt bits and disabled fastpath if preempt is enabled]
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Reviewed-by: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2008-02-07 17:47:41 -08:00
Christoph Lameter
683d0baad3 SLUB: Use unique end pointer for each slab page.
We use a NULL pointer on freelists to signal that there are no more objects.
However the NULL pointers of all slabs match in contrast to the pointers to
the real objects which are in different ranges for different slab pages.

Change the end pointer to be a pointer to the first object and set bit 0.
Every slab will then have a different end pointer. This is necessary to ensure
that end markers can be matched to the source slab during cmpxchg_local.

Bring back the use of the mapping field by SLUB since we would otherwise have
to call a relatively expensive function page_address() in __slab_alloc().  Use
of the mapping field allows avoiding a call to page_address() in various other
functions as well.

There is no need to change the page_mapping() function since bit 0 is set on
the mapping as also for anonymous pages.  page_mapping(slab_page) will
therefore still return NULL although the mapping field is overloaded.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2008-02-07 17:47:41 -08:00
Christoph Lameter
5bb983b0cc SLUB: Deal with annoying gcc warning on kfree()
gcc 4.2 spits out an annoying warning if one casts a const void *
pointer to a void * pointer. No warning is generated if the
conversion is done through an assignment.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
2008-02-07 17:47:41 -08:00
root
ba84c73c7a SLUB: Do not upset lockdep
inconsistent {softirq-on-W} -> {in-softirq-W} usage.
swapper/0 [HC0[0]:SC1[1]:HE0:SE0] takes:
 (&n->list_lock){-+..}, at: [<ffffffff802935c1>] add_partial+0x31/0xa0
{softirq-on-W} state was registered at:
  [<ffffffff80259fb8>] __lock_acquire+0x3e8/0x1140
  [<ffffffff80259838>] debug_check_no_locks_freed+0x188/0x1a0
  [<ffffffff8025ad65>] lock_acquire+0x55/0x70
  [<ffffffff802935c1>] add_partial+0x31/0xa0
  [<ffffffff805c76de>] _spin_lock+0x1e/0x30
  [<ffffffff802935c1>] add_partial+0x31/0xa0
  [<ffffffff80296f9c>] kmem_cache_open+0x1cc/0x330
  [<ffffffff805c7984>] _spin_unlock_irq+0x24/0x30
  [<ffffffff802974f4>] create_kmalloc_cache+0x64/0xf0
  [<ffffffff80295640>] init_alloc_cpu_cpu+0x70/0x90
  [<ffffffff8080ada5>] kmem_cache_init+0x65/0x1d0
  [<ffffffff807f1b4e>] start_kernel+0x23e/0x350
  [<ffffffff807f112d>] _sinittext+0x12d/0x140
  [<ffffffffffffffff>] 0xffffffffffffffff

This change isn't really necessary for correctness, but it prevents lockdep
from getting upset and then disabling itself.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Christoph Lameter <clameter@sgi.com>
Cc: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Christoph Lameter <clameter@sgi.com>
2008-02-04 10:56:02 -08:00
Pekka Enberg
064287807c SLUB: Fix coding style violations
This fixes most of the obvious coding style violations in mm/slub.c as
reported by checkpatch.

Acked-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Christoph Lameter <clameter@sgi.com>
2008-02-04 10:56:02 -08:00