Commit Graph

22 Commits

Author SHA1 Message Date
Somnath Kotur
311fddc756 be2net: Support for FAT dump retrieval using ethtool --register-dump option
Signed-off-by: Somnath Kotur <somnath.kotur@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-30 21:39:19 -07:00
Ajit Khaparde
d2145cde58 be2net: Copyright notice change. Update to Emulex instead of ServerEngines
Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-16 11:29:46 -07:00
Sathya Perla
2e588f84f2 be2net: changes for BE3 native mode support
So far be2net has been using BE3 in legacy mode. It now checks for native
 mode capability and if available it sets it. In native mode, the RX_COMPL
 structure is different from that in legacy mode.

Signed-off-by: Sathya Perla <sathya.perla@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-14 15:17:09 -07:00
Padmanabh Ratnakar
37eed1cbbd be2net: Add error recovery during load for Lancer
Add error recovery during load for Lancer

Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com>
Signed-off-by: Sathya Perla <sathya.perla@emulex.com>
Signed-off-by: Subramanian Seetharaman <subbu.seetharaman@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-07 15:26:56 -08:00
Ajit Khaparde
9e1453c5c5 be2net: use hba_port_num instead of port_num
Use hba_port_num for phy loopback and ethtool phy identification.

From: Suresh R <suresh.reddy@emulex.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-22 10:26:47 -08:00
Sathya Perla
fe6d2a38b2 be2net: adding support for Lancer family of CNAs
Key changes are:
- EQ ids are not assigned consecutively in Lancer. So, fix mapping of MSIx
  vector to EQ-id.
- BAR mapping and some req locations different for Lancer.
- TCP,UDP,IP checksum fields must be compulsorily set in TX wrb for TSO in
  Lancer.
- CEV_IST reg not present in Lancer; so, peek into event queue to check for
  new entries
- cq_create and mcc_create cmd interface is different for Lancer; handle
  accordingly

Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com>
Signed-off-by: Sathya Perla <sathya.perla@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-27 17:43:20 -08:00
Ajit Khaparde
1ef78abec6 be2net: fix net-snmp error because of wrong packet stats
Wrong packet statistics for multicast Rx was causing net-snmp error messages
every 15 seconds. Instead of picking the multicast stats from hardware,
now maintain it in the driver itself.

Signed-off-by: Ajit Khaparde <ajitk@serverengines.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-03 09:52:45 -07:00
Linus Torvalds
3cfc2c42c1 Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (48 commits)
  Documentation: update broken web addresses.
  fix comment typo "choosed" -> "chosen"
  hostap:hostap_hw.c Fix typo in comment
  Fix spelling contorller -> controller in comments
  Kconfig.debug: FAIL_IO_TIMEOUT: typo Faul -> Fault
  fs/Kconfig: Fix typo Userpace -> Userspace
  Removing dead MACH_U300_BS26
  drivers/infiniband: Remove unnecessary casts of private_data
  fs/ocfs2: Remove unnecessary casts of private_data
  libfc: use ARRAY_SIZE
  scsi: bfa: use ARRAY_SIZE
  drm: i915: use ARRAY_SIZE
  drm: drm_edid: use ARRAY_SIZE
  synclink: use ARRAY_SIZE
  block: cciss: use ARRAY_SIZE
  comment typo fixes: charater => character
  fix comment typos concerning "challenge"
  arm: plat-spear: fix typo in kerneldoc
  reiserfs: typo comment fix
  update email address
  ...
2010-08-04 15:31:02 -07:00
Ajit Khaparde
7c185276e8 be2net: add code to dump registers for debug
when the BE device becomes unresponsive, dump the registers to help debugging

Signed-off-by: Somnath K <somnathk@serverengines.com>
Signed-off-by: Ajit Khaparde <ajitk@serverengines.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-30 23:59:05 -07:00
Ajit Khaparde
49e4b8476f be2net: enable ipv6 tso support
Add ipv6 support to the be2net driver.

Signed-off-by: Ajit Khaparde <ajitk@serverengines.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-16 18:13:28 -07:00
Uwe Kleine-König
65155b3708 fix typos concerning "management"
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-06-16 18:03:16 +02:00
Sarveshwar Bandi
ba343c7736 be2net: Adding PCI SRIOV support
- Patch adds support to enable PCI SRIOV in the driver and changes to handle initialization of PCI virtual functions.
- Function handler to change mac addresses for VF from its corresponding PF.

Signed-off-by: Sarveshwar Bandi <sarveshwarb@serverengines.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-01 19:53:14 -07:00
Sarveshwar Bandi
9fe969345b be2net: download NCSI section during firmware update
Adding code to update NCSI section while updating firmware on the controller.

Signed-off-by: Sarveshwar Bandi <sarveshwarb@serverengines.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-03 01:04:38 -08:00
Ajit Khaparde
294aedcf87 be2net: update copyright dates
Signed-off-by: Ajit Khaparde <ajitk@serverengines.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-19 17:11:53 -08:00
Ajit Khaparde
3f0d4560ae be2net: bug fix for flashing the BladeEngine3 ASIC
Now flashing both BE2 and BE3 devices is supported.

From: Naresh G <nareshg@serverengines.com>
Signed-off-by: Ajit Khaparde <ajitk@serverengines.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-12 12:27:57 -08:00
Ajit Khaparde
71d8d1b58a be2net: Support for WoL using magic packet after suspend.
Add support for WOL using Magic Packet after suspend is done.

Signed-off-by: Sarveshwar Bandi <sarveshwarb@serverengines.com>
Signed-off-by: Ajit Khaparde <ajitk@serverengines.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-03 12:39:21 -08:00
Sarveshwar Bandi
fa9a6fed87 be2net: Patch to flash redboot section while firmware update.
Please apply patch to update redboot section while firmware update. Code
checks if section needs to be updated before actually doing it.

Signed-off-by: Sarveshwar Bandi <sarveshwarb@serverengines.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-20 14:23:47 -08:00
Ajit Khaparde
84517482e1 be2net: Changes to support flashing of the be2 network adapter
Changes to support flashing of the be2 network adapter using the
request_firmware() & ethtool infrastructure. The trigger to flash the device
will come from ethtool utility. The driver will invoke request_firmware()
to start the flash process. The file containing the flash image is expected
to be available in /lib/firmware/

Signed-off-by: Ajit Khaparde <ajitk@serverengines.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-07 01:56:38 -07:00
Sathya Perla
eec368fb3c be2net: remove pci_func field from be_adapter struct
pci function is available as PCI_FUNC(pdev->devfn); no need for a
separate field.

Signed-off-by: Sathya Perla <sathyap@serverengines.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-01 23:06:26 -07:00
Sathya Perla
c001c213b1 be2net: fix spurious interrupt handling in intx mode
Occasionally we may see an interrupt without an event in the eq.
In intx, we currently see the event queue and return IRQ_NONE causing
a the irq to be disabled ("no one cared".) Instead, read the CEV_ISR
reg to check the existence of the interrupt.

Signed-off-by: Sathya Perla <sathyap@serverengines.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-03 20:09:45 -07:00
Sathya Perla
5fb379ee67 be2net: Add MCC queue mechanism for BE cmds
Currenlty all cmds use the blocking MCC mbox to post cmds. An mbox cmd is protected
via a spin_lock(cmd_lock) and not spin_lock_bh() as it is undesirable
to disable BHs while a blocking mbox cmd is in progress (and take long to finish.)
This can lockup a cmd in progress in process context. Instead cmds that may be
called in BH context must use the MCC queue to post cmds. The cmd completions
are rcvd in a separate completion queue and the events are placed in the tx-event
queue.

Signed-off-by: Sathya Perla <sathyap@serverengines.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-19 00:18:39 -07:00
Sathya Perla
6b7c5b947c net: Add be2net driver.
Signed-off-by: Sathya Perla <sathyap@serverengines.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-11 23:32:22 -07:00