Commit Graph

828 Commits

Author SHA1 Message Date
Linus Torvalds
1081230b74 Merge branch 'for-4.3/core' of git://git.kernel.dk/linux-block
Pull core block updates from Jens Axboe:
 "This first core part of the block IO changes contains:

   - Cleanup of the bio IO error signaling from Christoph.  We used to
     rely on the uptodate bit and passing around of an error, now we
     store the error in the bio itself.

   - Improvement of the above from myself, by shrinking the bio size
     down again to fit in two cachelines on x86-64.

   - Revert of the max_hw_sectors cap removal from a revision again,
     from Jeff Moyer.  This caused performance regressions in various
     tests.  Reinstate the limit, bump it to a more reasonable size
     instead.

   - Make /sys/block/<dev>/queue/discard_max_bytes writeable, by me.
     Most devices have huge trim limits, which can cause nasty latencies
     when deleting files.  Enable the admin to configure the size down.
     We will look into having a more sane default instead of UINT_MAX
     sectors.

   - Improvement of the SGP gaps logic from Keith Busch.

   - Enable the block core to handle arbitrarily sized bios, which
     enables a nice simplification of bio_add_page() (which is an IO hot
     path).  From Kent.

   - Improvements to the partition io stats accounting, making it
     faster.  From Ming Lei.

   - Also from Ming Lei, a basic fixup for overflow of the sysfs pending
     file in blk-mq, as well as a fix for a blk-mq timeout race
     condition.

   - Ming Lin has been carrying Kents above mentioned patches forward
     for a while, and testing them.  Ming also did a few fixes around
     that.

   - Sasha Levin found and fixed a use-after-free problem introduced by
     the bio->bi_error changes from Christoph.

   - Small blk cgroup cleanup from Viresh Kumar"

* 'for-4.3/core' of git://git.kernel.dk/linux-block: (26 commits)
  blk: Fix bio_io_vec index when checking bvec gaps
  block: Replace SG_GAPS with new queue limits mask
  block: bump BLK_DEF_MAX_SECTORS to 2560
  Revert "block: remove artifical max_hw_sectors cap"
  blk-mq: fix race between timeout and freeing request
  blk-mq: fix buffer overflow when reading sysfs file of 'pending'
  Documentation: update notes in biovecs about arbitrarily sized bios
  block: remove bio_get_nr_vecs()
  fs: use helper bio_add_page() instead of open coding on bi_io_vec
  block: kill merge_bvec_fn() completely
  md/raid5: get rid of bio_fits_rdev()
  md/raid5: split bio for chunk_aligned_read
  block: remove split code in blkdev_issue_{discard,write_same}
  btrfs: remove bio splitting and merge_bvec_fn() calls
  bcache: remove driver private bio splitting code
  block: simplify bio_add_page()
  block: make generic_make_request handle arbitrarily sized bios
  blk-cgroup: Drop unlikely before IS_ERR(_OR_NULL)
  block: don't access bio->bi_error after bio_put()
  block: shrink struct bio down to 2 cache lines again
  ...
2015-09-02 13:10:25 -07:00
Len Brown
2fd77fff4b PM / suspend: make sync() on suspend-to-RAM build-time optional
The Linux kernel suspend path has traditionally invoked sys_sync()
before freezing user threads.

But sys_sync() can be expensive, and some user-space OS's do not want
the kernel to pay the cost of sys_sync() on every suspend -- preferring
invoke sync() from user-space if/when they want it.

So make sys_sync on suspend build-time optional.

The default is unchanged.

Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-07-31 23:46:05 +02:00
Christoph Hellwig
4246a0b63b block: add a bi_error field to struct bio
Currently we have two different ways to signal an I/O error on a BIO:

 (1) by clearing the BIO_UPTODATE flag
 (2) by returning a Linux errno value to the bi_end_io callback

The first one has the drawback of only communicating a single possible
error (-EIO), and the second one has the drawback of not beeing persistent
when bios are queued up, and are not passed along from child to parent
bio in the ever more popular chaining scenario.  Having both mechanisms
available has the additional drawback of utterly confusing driver authors
and introducing bugs where various I/O submitters only deal with one of
them, and the others have to add boilerplate code to deal with both kinds
of error returns.

So add a new bi_error field to store an errno value directly in struct
bio and remove the existing mechanisms to clean all this up.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: NeilBrown <neilb@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-07-29 08:55:15 -06:00
SungEun Kim
6ce12a977b PM / autosleep: Use workqueue for user space wakeup sources garbage collector
The synchronous synchronize_rcu() in wakeup_source_remove() makes
user process which writes to /sys/kernel/wake_unlock blocked sometimes.

For example, when android eventhub tries to release a wakelock, this
blocking process can occur, and eventhub can't get input events
for a while.

Using a work item instead of direct function call at pm_wake_unlock()
can prevent this unnecessary delay from happening.

Signed-off-by: SungEun Kim <cleaneye.kim@lge.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-07-14 21:04:48 +02:00
Linus Torvalds
5c3950970b Power management and ACPI fixes for v4.2-rc1
- Fix a recently added memory leak in an error path in the ACPI
    resources management code (Dan Carpenter).
 
  - Fix a build warning triggered by an ACPI video header function
    that should be static inline (Borislav Petkov).
 
  - Change names of helper function converting struct fwnode_handle
    pointers to either struct device_node or struct acpi_device
    pointers so they don't conflict with local variable names
    (Alexander Sverdlin).
 
  - Make the hibernate core re-enable nonboot CPUs on failures to
    disable them as expected (Vitaly Kuznetsov).
 
  - Increase the default timeout of the device suspend watchdog to
    prevent it from triggering too early on some systems (Takashi Iwai).
 
  - Prevent the cpuidle powernv driver from registering idle
    states with CPUIDLE_FLAG_TIMER_STOP set if CONFIG_TICK_ONESHOT
    is unset which leads to boot hangs (Preeti U Murthy).
 
 /
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABCAAGBQJVksL4AAoJEILEb/54YlRxY9cP/jnXE12Jv2aYQAram5Fd7nY7
 LSiuKAzVCqJbdBa3sRILKjMwgxciYABXypw6Zapa8TimAV374GZh6W4VXgIAifDf
 gdicSSxB4A5cViUEte3uebzdaM2QMcOcQ6A+UOe849q3emfbu91f0LXTWwahR0og
 Hjs7QCcvZS/swQIIY0JaIivC5mRwxrx141oPVn4GNf0tnOzH7eOUktYCZwh4U4Qo
 FwUn66XI+ttlrRxs/IV5QSQ9S5qDBHOKdv6MgmGwMzUXINTL4w2Zawg+Pw0m3Puf
 2VnT9jsz4anD1jZMJGLpeKNAjFJZ6ODiv06HjYhscaUZuMSECUiE9f6auUkiSU1F
 r463ujaIcCW5MWUGjRBq5GwP15IuIL/NxjWAVyyMxeYcjOKrpQeEJ2liWnXPv/Bh
 JVOoktFvFu1iOojlWfwnaC83bjZiJIJ6BFEywIm7l0wD1VAmk8IFepMqIrTp4U9R
 ptKD8Go9GripftHryqSQA5wgp64hIQKxSHi+fEM6RfcLskXVKxEYSButva3wnFHx
 2lQSxro42jsaP8O9T1wmb+br0h3efPeo9qyewmjld+vISeUhmsCILta55VtXI0wu
 ektWoAuaA97d+u+mTee4U2kONXo+yUuXe0YqlCb3x/7m8oMg6hoblWZPnWFSeqeH
 T/vI5cRS+a3NqAjctwmX
 =vkde
 -----END PGP SIGNATURE-----

Merge tag 'pm+acpi-4.2-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull power management and ACPI fixes from Rafael Wysocki:
 "These are fixes that didn't make it to the previous PM+ACPI pull
  request or are fixing issues introduced by it.

  Specifics:

   - Fix a recently added memory leak in an error path in the ACPI
     resources management code (Dan Carpenter)

   - Fix a build warning triggered by an ACPI video header function that
     should be static inline (Borislav Petkov)

   - Change names of helper function converting struct fwnode_handle
     pointers to either struct device_node or struct acpi_device
     pointers so they don't conflict with local variable names
     (Alexander Sverdlin)

   - Make the hibernate core re-enable nonboot CPUs on failures to
     disable them as expected (Vitaly Kuznetsov)

   - Increase the default timeout of the device suspend watchdog to
     prevent it from triggering too early on some systems (Takashi Iwai)

   - Prevent the cpuidle powernv driver from registering idle states
     with CPUIDLE_FLAG_TIMER_STOP set if CONFIG_TICK_ONESHOT is unset
     which leads to boot hangs (Preeti U Murthy)"

* tag 'pm+acpi-4.2-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  tick/idle/powerpc: Do not register idle states with CPUIDLE_FLAG_TIMER_STOP set in periodic mode
  PM / sleep: Increase default DPM watchdog timeout to 60
  PM / hibernate: re-enable nonboot cpus on disable_nonboot_cpus() failure
  ACPI / OF: Rename of_node() and acpi_node() to to_of_node() and to_acpi_node()
  ACPI / video: Inline acpi_video_set_dmi_backlight_type
  ACPI / resources: free memory on error in add_region_before()
2015-07-01 14:17:44 -07:00
Linus Torvalds
bfffa1cc9d Merge branch 'for-4.2/core' of git://git.kernel.dk/linux-block
Pull core block IO update from Jens Axboe:
 "Nothing really major in here, mostly a collection of smaller
  optimizations and cleanups, mixed with various fixes.  In more detail,
  this contains:

   - Addition of policy specific data to blkcg for block cgroups.  From
     Arianna Avanzini.

   - Various cleanups around command types from Christoph.

   - Cleanup of the suspend block I/O path from Christoph.

   - Plugging updates from Shaohua and Jeff Moyer, for blk-mq.

   - Eliminating atomic inc/dec of both remaining IO count and reference
     count in a bio.  From me.

   - Fixes for SG gap and chunk size support for data-less (discards)
     IO, so we can merge these better.  From me.

   - Small restructuring of blk-mq shared tag support, freeing drivers
     from iterating hardware queues.  From Keith Busch.

   - A few cfq-iosched tweaks, from Tahsin Erdogan and me.  Makes the
     IOPS mode the default for non-rotational storage"

* 'for-4.2/core' of git://git.kernel.dk/linux-block: (35 commits)
  cfq-iosched: fix other locations where blkcg_to_cfqgd() can return NULL
  cfq-iosched: fix sysfs oops when attempting to read unconfigured weights
  cfq-iosched: move group scheduling functions under ifdef
  cfq-iosched: fix the setting of IOPS mode on SSDs
  blktrace: Add blktrace.c to BLOCK LAYER in MAINTAINERS file
  block, cgroup: implement policy-specific per-blkcg data
  block: Make CFQ default to IOPS mode on SSDs
  block: add blk_set_queue_dying() to blkdev.h
  blk-mq: Shared tag enhancements
  block: don't honor chunk sizes for data-less IO
  block: only honor SG gap prevention for merges that contain data
  block: fix returnvar.cocci warnings
  block, dm: don't copy bios for request clones
  block: remove management of bi_remaining when restoring original bi_end_io
  block: replace trylock with mutex_lock in blkdev_reread_part()
  block: export blkdev_reread_part() and __blkdev_reread_part()
  suspend: simplify block I/O handling
  block: collapse bio bit space
  block: remove unused BIO_RW_BLOCK and BIO_EOF flags
  block: remove BIO_EOPNOTSUPP
  ...
2015-06-25 14:29:53 -07:00
Takashi Iwai
fff3b16d27 PM / sleep: Increase default DPM watchdog timeout to 60
Many harddisks (mostly WD ones) have firmware problems and take too
long, more than 10 seconds, to resume from suspend.  And this often
exceeds the default DPM watchdog timeout (12 seconds), resulting in a
kernel panic out of sudden.

Since most distros just take the default as is, we should give a bit
more safer value.  This patch increases the default value from 12
seconds to one minute, which has been confirmed to be long enough for
such problematic disks.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=91921
Fixes: 70fea60d88 (PM / Sleep: Detect device suspend/resume lockup and log event)
Cc: 3.13+ <stable@vger.kernel.org> # 3.13+
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-06-25 00:35:16 +02:00
Vitaly Kuznetsov
8c506608c3 PM / hibernate: re-enable nonboot cpus on disable_nonboot_cpus() failure
When disable_nonboot_cpus() fails on some cpu it doesn't bring back all
cpus it managed to offline, a consequent call to enable_nonboot_cpus() is
expected. In hibernation_platform_enter() we don't call
enable_nonboot_cpus() on error so cpus stay offlined.

create_image() and resume_target_kernel() functions handle
disable_nonboot_cpus() faults correctly, hibernation_platform_enter()
is the only one which is doing it wrong.

Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-06-24 23:48:44 +02:00
Christoph Hellwig
343df3c79c suspend: simplify block I/O handling
Stop abusing struct page functionality and the swap end_io handler, and
instead add a modified version of the blk-lib.c bio_batch helpers.

Also move the block I/O code into swap.c as they are directly tied into
each other.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Pavel Machek <pavel@ucw.cz>
Tested-by: Ming Lin <mlin@kernel.org>
Acked-by: Pavel Machek <pavel@ucw.cz>
Acked-by: Rafael J. Wysocki <rjw@rjwysocki.net>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-05-19 09:19:59 -06:00
Ruchi Kandoi
671767360d PM / sleep: Return -EBUSY from suspend_enter() on wakeup detection
If a wakeup source is found to be pending in the last stage of
suspend after syscore suspend, then the machine won't suspend, but
suspend_enter() will return 0.  That is confusing, as wakeup detection
elsewhere causes -EBUSY to be returned from suspend_enter().

To avoid the confusion, make suspend_enter() return -EBUSY in that
case too.

Signed-off-by: Ruchi Kandoi <kandoiruchi@google.com>
[ rjw: Subject and changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-05-19 02:26:56 +02:00
Rafael J. Wysocki
819b1bb30d PM / sleep: Fix symbol name in a comment in kernel/power/main.c
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-05-13 15:31:12 +02:00
Rafael J. Wysocki
a921504588 PM / sleep: Refine diagnostic messages in enter_state()
Some of the system suspend diagnostic messages related to
suspend-to-idle refer to it as "freeze sleep" or "freeze state"
while the others say "suspend-to-idle".  To reduce the possible
confusion that may result from that, refine the former either to
say "suspend to idle" too or to make it clearer that what is printed
is a state string written to /sys/power/state ("mem", "standby",
or "freeze").

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-05-12 23:45:12 +02:00
Rafael J. Wysocki
be77002101 Merge back earlier suspend/hibernate material for v4.1. 2015-04-10 12:01:59 +02:00
Rafael J. Wysocki
f82daee49c Revert "PM / hibernate: avoid unsafe pages in e820 reserved regions"
Commit 84c91b7ae0 (PM / hibernate: avoid unsafe pages in e820 reserved
regions) is reported to make resume from hibernation on Lenovo x230
unreliable, so revert it.

We will revisit the issue the commit in question was supposed to fix
in the future.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=96111
Reported-by: rhn <kebuac.rhn@porcupinefactory.org>
Cc: 3.17+ <stable@vger.kernel.org> # 3.17+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-04-07 01:13:23 +02:00
Zhonghui Fu
431d452af1 PM / sleep: add pm-trace support for suspending phase
Occasionally, the system can't come back up after suspend/resume
due to problems of device suspending phase. This patch make
PM_TRACE infrastructure cover device suspending phase of
suspend/resume process, and the information in RTC can tell
developers which device suspending function make system hang.

Signed-off-by: Zhonghui Fu <zhonghui.fu@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-03-18 15:54:27 +01:00
Brian Norris
1d4a9c17d4 PM / sleep: add configurable delay for pm_test
When CONFIG_PM_DEBUG=y, we provide a sysfs file (/sys/power/pm_test) for
selecting one of a few suspend test modes, where rather than entering a
full suspend state, the kernel will perform some subset of suspend
steps, wait 5 seconds, and then resume back to normal operation.

This mode is useful for (among other things) observing the state of the
system just before entering a sleep mode, for debugging or analysis
purposes. However, a constant 5 second wait is not sufficient for some
sorts of analysis; for example, on an SoC, one might want to use
external tools to probe the power states of various on-chip controllers
or clocks.

This patch turns this 5 second delay into a configurable module
parameter, so users can determine how long to wait in this
pseudo-suspend state before resuming the system.

Example (wait 30 seconds);

  # echo 30 > /sys/module/suspend/parameters/pm_test_delay
  # echo core > /sys/power/pm_test
  # time echo mem  > /sys/power/state
  ...
  [   17.583625] suspend debug: Waiting for 30 second(s).
  ...
  real	0m30.381s
  user	0m0.017s
  sys	0m0.080s

Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Reviewed-by: Kevin Cernekee <cernekee@chromium.org>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-02-26 01:21:26 +01:00
Rafael J. Wysocki
3810631332 PM / sleep: Re-implement suspend-to-idle handling
In preparation for adding support for quiescing timers in the final
stage of suspend-to-idle transitions, rework the freeze_enter()
function making the system wait on a wakeup event, the freeze_wake()
function terminating the suspend-to-idle loop and the mechanism by
which deep idle states are entered during suspend-to-idle.

First of all, introduce a simple state machine for suspend-to-idle
and make the code in question use it.

Second, prevent freeze_enter() from losing wakeup events due to race
conditions and ensure that the number of online CPUs won't change
while it is being executed.  In addition to that, make it force
all of the CPUs re-enter the idle loop in case they are in idle
states already (so they can enter deeper idle states if possible).

Next, drop cpuidle_use_deepest_state() and replace use_deepest_state
checks in cpuidle_select() and cpuidle_reflect() with a single
suspend-to-idle state check in cpuidle_idle_call().

Finally, introduce cpuidle_enter_freeze() that will simply find the
deepest idle state available to the given CPU and enter it using
cpuidle_enter().

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
2015-02-13 23:49:36 +01:00
Michal Hocko
c32b3cbe0d oom, PM: make OOM detection in the freezer path raceless
Commit 5695be142e ("OOM, PM: OOM killed task shouldn't escape PM
suspend") has left a race window when OOM killer manages to
note_oom_kill after freeze_processes checks the counter.  The race
window is quite small and really unlikely and partial solution deemed
sufficient at the time of submission.

Tejun wasn't happy about this partial solution though and insisted on a
full solution.  That requires the full OOM and freezer's task freezing
exclusion, though.  This is done by this patch which introduces oom_sem
RW lock and turns oom_killer_disable() into a full OOM barrier.

oom_killer_disabled check is moved from the allocation path to the OOM
level and we take oom_sem for reading for both the check and the whole
OOM invocation.

oom_killer_disable() takes oom_sem for writing so it waits for all
currently running OOM killer invocations.  Then it disable all the further
OOMs by setting oom_killer_disabled and checks for any oom victims.
Victims are counted via mark_tsk_oom_victim resp.  unmark_oom_victim.  The
last victim wakes up all waiters enqueued by oom_killer_disable().
Therefore this function acts as the full OOM barrier.

The page fault path is covered now as well although it was assumed to be
safe before.  As per Tejun, "We used to have freezing points deep in file
system code which may be reacheable from page fault." so it would be
better and more robust to not rely on freezing points here.  Same applies
to the memcg OOM killer.

out_of_memory tells the caller whether the OOM was allowed to trigger and
the callers are supposed to handle the situation.  The page allocation
path simply fails the allocation same as before.  The page fault path will
retry the fault (more on that later) and Sysrq OOM trigger will simply
complain to the log.

Normally there wouldn't be any unfrozen user tasks after
try_to_freeze_tasks so the function will not block. But if there was an
OOM killer racing with try_to_freeze_tasks and the OOM victim didn't
finish yet then we have to wait for it. This should complete in a finite
time, though, because

	- the victim cannot loop in the page fault handler (it would die
	  on the way out from the exception)
	- it cannot loop in the page allocator because all the further
	  allocation would fail and __GFP_NOFAIL allocations are not
	  acceptable at this stage
	- it shouldn't be blocked on any locks held by frozen tasks
	  (try_to_freeze expects lockless context) and kernel threads and
	  work queues are not frozen yet

Signed-off-by: Michal Hocko <mhocko@suse.cz>
Suggested-by: Tejun Heo <tj@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-11 17:06:03 -08:00
Michal Hocko
35536ae170 PM: convert printk to pr_* equivalent
While touching this area let's convert printk to pr_*.  This also makes
the printing of continuation lines done properly.

Signed-off-by: Michal Hocko <mhocko@suse.cz>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-11 17:06:03 -08:00
Linus Torvalds
872912352c ACPI and power management updates for v3.20-rc1
- Rework of the core ACPI resources parsing code to fix issues
    in it and make using resource offsets more convenient and
    consolidation of some resource-handing code in a couple of places
    that have grown analagous data structures and code to cover the
    the same gap in the core (Jiang Liu, Thomas Gleixner, Lv Zheng).
 
  - ACPI-based IOAPIC hotplug support on top of the resources handling
    rework (Jiang Liu, Yinghai Lu).
 
  - ACPICA update to upstream release 20150204 including an interrupt
    handling rework that allows drivers to install raw handlers for
    ACPI GPEs which then become entirely responsible for the given GPE
    and the ACPICA core code won't touch it (Lv Zheng, David E Box,
    Octavian Purdila).
 
  - ACPI EC driver rework to fix several concurrency issues and other
    problems related to events handling on top of the ACPICA's new
    support for raw GPE handlers (Lv Zheng).
 
  - New ACPI driver for AMD SoCs analogous to the LPSS (Low-Power
    Subsystem) driver for Intel chips (Ken Xue).
 
  - Two minor fixes of the ACPI LPSS driver (Heikki Krogerus,
    Jarkko Nikula).
 
  - Two new blacklist entries for machines (Samsung 730U3E/740U3E and
    510R) where the native backlight interface doesn't work correctly
    while the ACPI one does (Hans de Goede).
 
  - Rework of the ACPI processor driver's handling of idle states
    to make the code more straightforward and less bloated overall
    (Rafael J Wysocki).
 
  - Assorted minor fixes related to ACPI and SFI (Andreas Ruprecht,
    Andy Shevchenko, Hanjun Guo, Jan Beulich, Rafael J Wysocki,
    Yaowei Bai).
 
  - PCI core power management modification to avoid resuming (some)
    runtime-suspended devices during system suspend if they are in
    the right states already (Rafael J Wysocki).
 
  - New SFI-based cpufreq driver for Intel platforms using SFI
    (Srinidhi Kasagar).
 
  - cpufreq core fixes, cleanups and simplifications (Viresh Kumar,
    Doug Anderson, Wolfram Sang).
 
  - SkyLake CPU support and other updates for the intel_pstate driver
    (Kristen Carlson Accardi, Srinivas Pandruvada).
 
  - cpufreq-dt driver cleanup (Markus Elfring).
 
  - Init fix for the ARM big.LITTLE cpuidle driver (Sudeep Holla).
 
  - Generic power domains core code fixes and cleanups (Ulf Hansson).
 
  - Operating Performance Points (OPP) core code cleanups and kernel
    documentation update (Nishanth Menon).
 
  - New dabugfs interface to make the list of PM QoS constraints
    available to user space (Nishanth Menon).
 
  - New devfreq driver for Tegra Activity Monitor (Tomeu Vizoso).
 
  - New devfreq class (devfreq_event) to provide raw utilization data
    to devfreq governors (Chanwoo Choi).
 
  - Assorted minor fixes and cleanups related to power management
    (Andreas Ruprecht, Krzysztof Kozlowski, Rickard Strandqvist,
    Pavel Machek, Todd E Brandt, Wonhong Kwon).
 
  - turbostat updates (Len Brown) and cpupower Makefile improvement
    (Sriram Raghunathan).
 
 /
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABCAAGBQJU2neOAAoJEILEb/54YlRx51QP/jrv1Wb5eMaemzMksPIWI5Zn
 I8IbxzToxu7wDDsrTBRv+LuyllMPrnppFOHHvB35gUYu7Y6I066s3ErwuqeFlbmy
 +VicmyGMahv3yN74qg49MXzWtaJZa8hrFXn8ItujiUIcs08yELi0vBQFlZImIbTB
 PdQngO88VfiOVjDvmKkYUU//9Sc9LCU0ZcdUQXSnA1oNOxuUHjiARz98R03hhSqu
 BWR+7M0uaFbu6XeK+BExMXJTpKicIBZ1GAF6hWrS8V4aYg+hH1cwjf2neDAzZkcU
 UkXieJlLJrCq+ZBNcy7WEhkWQkqJNWei5WYiy6eoQeQpNoliY2V+2OtSMJaKqDye
 PIiMwXstyDc5rgyULN0d1UUzY6mbcUt2rOL0VN2bsFVIJ1HWCq8mr8qq689pQUYv
 tcH18VQ2/6r2zW28sTO/ByWLYomklD/Y6bw2onMhGx3Knl0D8xYJKapVnTGhr5eY
 d4k41ybHSWNKfXsZxdJc+RxndhPwj9rFLfvY/CZEhLcW+2pAiMarRDOPXDoUI7/l
 aJpmPzy/6mPXGBnTfr6jKDSY3gXNazRIvfPbAdiGayKcHcdRM4glbSbNH0/h1Iq6
 HKa8v9Fx87k1X5r4ZbhiPdABWlxuKDiM7725rfGpvjlWC3GNFOq7YTVMOuuBA225
 Mu9PRZbOsZsnyNkixBpX
 =zZER
 -----END PGP SIGNATURE-----

Merge tag 'pm+acpi-3.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull ACPI and power management updates from Rafael Wysocki:
 "We have a few new features this time, including a new SFI-based
  cpufreq driver, a new devfreq driver for Tegra Activity Monitor, a new
  devfreq class for providing its governors with raw utilization data
  and a new ACPI driver for AMD SoCs.

  Still, the majority of changes here are reworks of existing code to
  make it more straightforward or to prepare it for implementing new
  features on top of it.  The primary example is the rework of ACPI
  resources handling from Jiang Liu, Thomas Gleixner and Lv Zheng with
  support for IOAPIC hotplug implemented on top of it, but there is
  quite a number of changes of this kind in the cpufreq core, ACPICA,
  ACPI EC driver, ACPI processor driver and the generic power domains
  core code too.

  The most active developer is Viresh Kumar with his cpufreq changes.

  Specifics:

   - Rework of the core ACPI resources parsing code to fix issues in it
     and make using resource offsets more convenient and consolidation
     of some resource-handing code in a couple of places that have grown
     analagous data structures and code to cover the the same gap in the
     core (Jiang Liu, Thomas Gleixner, Lv Zheng).

   - ACPI-based IOAPIC hotplug support on top of the resources handling
     rework (Jiang Liu, Yinghai Lu).

   - ACPICA update to upstream release 20150204 including an interrupt
     handling rework that allows drivers to install raw handlers for
     ACPI GPEs which then become entirely responsible for the given GPE
     and the ACPICA core code won't touch it (Lv Zheng, David E Box,
     Octavian Purdila).

   - ACPI EC driver rework to fix several concurrency issues and other
     problems related to events handling on top of the ACPICA's new
     support for raw GPE handlers (Lv Zheng).

   - New ACPI driver for AMD SoCs analogous to the LPSS (Low-Power
     Subsystem) driver for Intel chips (Ken Xue).

   - Two minor fixes of the ACPI LPSS driver (Heikki Krogerus, Jarkko
     Nikula).

   - Two new blacklist entries for machines (Samsung 730U3E/740U3E and
     510R) where the native backlight interface doesn't work correctly
     while the ACPI one does (Hans de Goede).

   - Rework of the ACPI processor driver's handling of idle states to
     make the code more straightforward and less bloated overall (Rafael
     J Wysocki).

   - Assorted minor fixes related to ACPI and SFI (Andreas Ruprecht,
     Andy Shevchenko, Hanjun Guo, Jan Beulich, Rafael J Wysocki, Yaowei
     Bai).

   - PCI core power management modification to avoid resuming (some)
     runtime-suspended devices during system suspend if they are in the
     right states already (Rafael J Wysocki).

   - New SFI-based cpufreq driver for Intel platforms using SFI
     (Srinidhi Kasagar).

   - cpufreq core fixes, cleanups and simplifications (Viresh Kumar,
     Doug Anderson, Wolfram Sang).

   - SkyLake CPU support and other updates for the intel_pstate driver
     (Kristen Carlson Accardi, Srinivas Pandruvada).

   - cpufreq-dt driver cleanup (Markus Elfring).

   - Init fix for the ARM big.LITTLE cpuidle driver (Sudeep Holla).

   - Generic power domains core code fixes and cleanups (Ulf Hansson).

   - Operating Performance Points (OPP) core code cleanups and kernel
     documentation update (Nishanth Menon).

   - New dabugfs interface to make the list of PM QoS constraints
     available to user space (Nishanth Menon).

   - New devfreq driver for Tegra Activity Monitor (Tomeu Vizoso).

   - New devfreq class (devfreq_event) to provide raw utilization data
     to devfreq governors (Chanwoo Choi).

   - Assorted minor fixes and cleanups related to power management
     (Andreas Ruprecht, Krzysztof Kozlowski, Rickard Strandqvist, Pavel
     Machek, Todd E Brandt, Wonhong Kwon).

   - turbostat updates (Len Brown) and cpupower Makefile improvement
     (Sriram Raghunathan)"

* tag 'pm+acpi-3.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (151 commits)
  tools/power turbostat: relax dependency on APERF_MSR
  tools/power turbostat: relax dependency on invariant TSC
  Merge branch 'pci/host-generic' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci into acpi-resources
  tools/power turbostat: decode MSR_*_PERF_LIMIT_REASONS
  tools/power turbostat: relax dependency on root permission
  ACPI / video: Add disable_native_backlight quirk for Samsung 510R
  ACPI / PM: Remove unneeded nested #ifdef
  USB / PM: Remove unneeded #ifdef and associated dead code
  intel_pstate: provide option to only use intel_pstate with HWP
  ACPI / EC: Add GPE reference counting debugging messages
  ACPI / EC: Add query flushing support
  ACPI / EC: Refine command storm prevention support
  ACPI / EC: Add command flushing support.
  ACPI / EC: Introduce STARTED/STOPPED flags to replace BLOCKED flag
  ACPI: add AMD ACPI2Platform device support for x86 system
  ACPI / table: remove duplicate NULL check for the handler of acpi_table_parse()
  ACPI / EC: Update revision due to raw handler mode.
  ACPI / EC: Reduce ec_poll() by referencing the last register access timestamp.
  ACPI / EC: Fix several GPE handling issues by deploying ACPI_GPE_DISPATCH_RAW_HANDLER mode.
  ACPICA: Events: Enable APIs to allow interrupt/polling adaptive request based GPE handling model
  ...
2015-02-10 15:09:41 -08:00
Rafael J. Wysocki
f52386892f Merge branches 'pm-sleep' and 'pm-runtime'
* pm-sleep:
  PM / hibernate: exclude freed pages from allocated pages printout
  PM / sleep: export suspend_resume trace event
  PM / sleep: Mention async suspend in PM_TRACE documentation
  PM / hibernate: Remove unused function

* pm-runtime:
  ACPI / PM: Remove unneeded nested #ifdef
  USB / PM: Remove unneeded #ifdef and associated dead code
2015-02-10 16:09:52 +01:00
Wonhong Kwon
a64fc82c4f PM / hibernate: exclude freed pages from allocated pages printout
hibernate_preallocate_memory() prints out that how many pages are
allocated, but it doesn't take into consideration the pages freed by
free_unnecessary_pages(). Therefore, it always shows the count more
than actually allocated.

Signed-off-by: Wonhong Kwon <wonhong.kwon@lge.com>
[ rjw: Subject ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-02-03 22:53:53 +01:00
Rickard Strandqvist
d78cb3680c PM / hibernate: Remove unused function
Remove the function get_safe_write_buffer() that is not used anywhere.

This was partially found by using a static code analysis program called cppcheck.

Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-01-23 23:11:42 +01:00
Nishanth Menon
f5f4eda4c9 PM / QoS: Add debugfs support to view the list of constraints
PM QoS requests are notoriously hard to debug and made even
more so due to their highly dynamic nature. Having visibility
into the internal data representation per constraint allows
us to have much better appreciation of potential issues or
bad usage by drivers in the system.

So introduce for all classes of PM QoS, an entry in
/sys/kernel/debug/pm_qos that shall show all the current
requests as well as the snapshot of the value these requests
boil down to. For example:
==> /sys/kernel/debug/pm_qos/cpu_dma_latency <==
1: 4444: Active
2: 2000000000: Default
3: 2000000000: Default
4: 2000000000: Default
Type=Minimum, Value=4444, Requests: active=1 / total=4

==> /sys/kernel/debug/pm_qos/memory_bandwidth <==
Empty!

...

The actual value listed will have their meaning based
on the QoS it is on, the 'Type' indicates what logic
it would use to collate the information - Minimum,
Maximum, or Sum. Value is the collation of all requests.
This interface also compares the values with the defaults
for the QoS class and marks the ones that are
currently active.

Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Acked-by: Kevin Hilman <khilman@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-01-23 22:16:21 +01:00
Pranith Kumar
83fe27ea53 rcu: Make SRCU optional by using CONFIG_SRCU
SRCU is not necessary to be compiled by default in all cases. For tinification
efforts not compiling SRCU unless necessary is desirable.

The current patch tries to make compiling SRCU optional by introducing a new
Kconfig option CONFIG_SRCU which is selected when any of the components making
use of SRCU are selected.

If we do not select CONFIG_SRCU, srcu.o will not be compiled at all.

   text    data     bss     dec     hex filename
   2007       0       0    2007     7d7 kernel/rcu/srcu.o

Size of arch/powerpc/boot/zImage changes from

   text    data     bss     dec     hex filename
 831552   64180   23944  919676   e087c arch/powerpc/boot/zImage : before
 829504   64180   23952  917636   e0084 arch/powerpc/boot/zImage : after

so the savings are about ~2000 bytes.

Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
CC: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
CC: Josh Triplett <josh@joshtriplett.org>
CC: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
[ paulmck: resolve conflict due to removal of arch/ia64/kvm/Kconfig. ]
2015-01-06 11:04:29 -08:00
Rafael J. Wysocki
464ed18ebd PM: Eliminate CONFIG_PM_RUNTIME
Having switched over all of the users of CONFIG_PM_RUNTIME to use
CONFIG_PM directly, turn the latter into a user-selectable option
and drop the former entirely from the tree.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Kevin Hilman <khilman@linaro.org>
2014-12-19 22:55:06 +01:00
Rafael J. Wysocki
e3d857e1ae Merge branch 'pm-runtime'
* pm-runtime: (25 commits)
  i2c-omap / PM: Drop CONFIG_PM_RUNTIME from i2c-omap.c
  dmaengine / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
  drivers: sh / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
  e1000e / igb / PM: Eliminate CONFIG_PM_RUNTIME
  MMC / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
  MFD / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
  misc / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
  media / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
  input / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
  iio / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
  hsi / OMAP / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
  i2c-hid / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
  drm / exynos / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
  gpio / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
  hwrandom / exynos / PM: Use CONFIG_PM in #ifdef
  block / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
  USB / PM: Drop CONFIG_PM_RUNTIME from the USB core
  PM: Merge the SET*_RUNTIME_PM_OPS() macros
  PM / Kconfig: Do not select PM directly from Kconfig files
  PCI / PM: Drop CONFIG_PM_RUNTIME from the PCI core
  ...
2014-12-08 20:00:44 +01:00
Rafael J. Wysocki
389cbf36e5 Merge branches 'pm-domains', 'pm-sleep' and 'pm-tools'
* pm-domains:
  ARM: shmobile: Convert to genpd flags for PM clocks for R-mobile
  ARM: shmobile: Convert to genpd flags for PM clocks for r8a7779
  PM / Domains: Initial PM clock support for genpd
  PM / Domains: Power on the PM domain right after attach completes
  PM / Domains: Move struct pm_domain_data to pm_domain.h
  PM / Domains: Extract code to power off/on a PM domain
  PM / Domains: Make genpd parameter of pm_genpd_present() const

* pm-sleep:
  PM / hibernate: Deletion of an unnecessary check before the function call "vfree"
  PM / Hibernate: Migrate to ktime_t

* pm-tools:
  tools: cpupower: fix return checks for sysfs_get_idlestate_count()
2014-12-08 20:00:02 +01:00
Rafael J. Wysocki
d30d819dc8 PM: Drop CONFIG_PM_RUNTIME from the driver core
After commit b2b49ccbdd (PM: Kconfig: Set PM_RUNTIME if PM_SLEEP is
selected) PM_RUNTIME is always set if PM is set, so quite a few
depend on CONFIG_PM or even may be dropped entirely in some cases.

Replace CONFIG_PM_RUNTIME with CONFIG_PM in the PM core code.

Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Kevin Hilman <khilman@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-12-04 00:46:58 +01:00
Rafael J. Wysocki
af261127e9 Merge back earlier 'pm-runtime' material for 3.19-rc1. 2014-11-27 01:37:53 +01:00
Rafael J. Wysocki
b2b49ccbdd PM: Kconfig: Set PM_RUNTIME if PM_SLEEP is selected
The number of and dependencies between high-level power management
Kconfig options make life much harder than necessary.  Several
conbinations of them have to be tested and supported, even though
some of those combinations are very rarely used in practice (if
they are used in practice at all).  Moreover, the fact that we
have separate independent Kconfig options for runtime PM and
system suspend is a serious obstacle for integration between
the two frameworks.

To overcome these difficulties, always select PM_RUNTIME if PM_SLEEP
is set.  Among other things, this will allow system suspend callbacks
provided by bus types and device drivers to rely on the runtime PM
framework regardless of the kernel configuration.

Enthusiastically-acked-by: Kevin Hilman <khilman@linaro.org>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-11-18 23:41:40 +01:00
Pankaj Dubey
7d3dcd042c PM: Kconfig: fix unmet dependency for CPU_PM
If BL_SWITCHER is enabled but SUSPEND and CPU_IDLE is not enabled
we are getting following config warning.

warning: (BL_SWITCHER) selects CPU_PM which has unmet direct
dependencies (SUSPEND || CPU_IDLE)

It has been noticed that CPU_PM dependencies in this file are not really
required so let's remove these dependencies from CPU_PM.

Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com>
Acked-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-11-18 02:51:17 +01:00
Markus Elfring
6c45de0d51 PM / hibernate: Deletion of an unnecessary check before the function call "vfree"
The vfree() function performs also input parameter validation. Thus the test
around the call is not needed.

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-11-18 02:49:40 +01:00
Rafael J. Wysocki
c68cfdc0a5 Merge back 'pm-sleep' material for 3.19-rc1. 2014-11-18 01:23:34 +01:00
Kevin Hilman
977d2fa6b2 PM / Runtime: Kconfig: move ia64 dependency to arch/ia64/Kconfig
The IA64_HP_SIM dependency on PM_RUNTIME should be done in the arch
Kconfig instead of in the PM core.  Move it accordingly.

NOTE: arch/ia64/Kconfig currently does a 'select PM', which since
commit 1eb208aea3 (PM: Make CONFIG_PM depend on (CONFIG_PM_SLEEP ||
CONFIG_PM_RUNTIME)) is effectively a noop unless PM_SLEEP or
PM_RUNTIME are set elsewhere.

Signed-off-by: Kevin Hilman <khilman@linaro.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-11-15 00:39:56 +01:00
Dmitry Eremin-Solenikov
403b9636fe PM / sleep: Fix entering suspend-to-IDLE if no freeze_oops is set
If no freeze_ops is set, trying to enter suspend-to-IDLE will cause a
nice oops in platform_suspend_prepare_late(). Add respective checks to
platform_suspend_prepare_late() and platform_resume_early() functions.

Fixes: a8d46b9e4e (ACPI / sleep: Rework the handling of ACPI GPE wakeup ...)
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-11-08 22:30:05 +01:00
Tina Ruchandani
db59760582 PM / Hibernate: Migrate to ktime_t
This patch migrates swsusp_show_speed and its callers to using ktime_t instead
of 'struct timeval' which suffers from the y2038 problem.

Changes to swsusp_show_speed:
        - use ktime_t for start and stop times
        - pass start and stop times by value
Calling functions affected:
        - load_image
        - load_image_lzo
        - save_image
        - save_image_lzo
        - hibernate_preallocate_memory
Design decisions:
        - use ktime_t to preserve same granularity of reporting as before
        - use centisecs logic as before to avoid 'div by zero' issues caused by
          using seconds and nanoseconds directly
        - use monotonic time (ktime_get()) since we only care about elapsed time.

Signed-off-by: Tina Ruchandani <ruchandani.tina@gmail.com>
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-11-03 01:02:55 +01:00
Imre Deak
94fb823fcb PM / Sleep: fix recovery during resuming from hibernation
If a device's dev_pm_ops::freeze callback fails during the QUIESCE
phase, we don't rollback things correctly calling the thaw and complete
callbacks. This could leave some devices in a suspended state in case of
an error during resuming from hibernation.

Signed-off-by: Imre Deak <imre.deak@intel.com>
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-10-27 18:42:26 +01:00
Rafael J. Wysocki
96ed753235 Merge branch 'freezer'
* freezer:
  PM / freezer: Clean up code after recent fixes
  PM: convert do_each_thread to for_each_process_thread
  OOM, PM: OOM killed task shouldn't escape PM suspend
  freezer: remove obsolete comments in __thaw_task()
  freezer: Do not freeze tasks killed by OOM killer
2014-10-23 23:02:45 +02:00
Rafael J. Wysocki
37c72cac0e Merge branch 'pm-qos'
* pm-qos:
  PM / QoS: Add PM_QOS_MEMORY_BANDWIDTH class
2014-10-23 23:02:36 +02:00
Rafael J. Wysocki
71be2114a5 PM / freezer: Clean up code after recent fixes
Clean up the code in process.c after recent changes to get rid of
unnecessary labels and goto statements.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-10-22 22:47:32 +02:00
Michal Hocko
a28e785a9f PM: convert do_each_thread to for_each_process_thread
as per 0c740d0afc (introduce for_each_thread() to replace the buggy
while_each_thread()) get rid of do_each_thread { } while_each_thread()
construct and replace it by a more error prone for_each_thread.

This patch doesn't introduce any user visible change.

Suggested-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Michal Hocko <mhocko@suse.cz>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-10-21 23:44:21 +02:00
Michal Hocko
5695be142e OOM, PM: OOM killed task shouldn't escape PM suspend
PM freezer relies on having all tasks frozen by the time devices are
getting frozen so that no task will touch them while they are getting
frozen. But OOM killer is allowed to kill an already frozen task in
order to handle OOM situtation. In order to protect from late wake ups
OOM killer is disabled after all tasks are frozen. This, however, still
keeps a window open when a killed task didn't manage to die by the time
freeze_processes finishes.

Reduce the race window by checking all tasks after OOM killer has been
disabled. This is still not race free completely unfortunately because
oom_killer_disable cannot stop an already ongoing OOM killer so a task
might still wake up from the fridge and get killed without
freeze_processes noticing. Full synchronization of OOM and freezer is,
however, too heavy weight for this highly unlikely case.

Introduce and check oom_kills counter which gets incremented early when
the allocator enters __alloc_pages_may_oom path and only check all the
tasks if the counter changes during the freezing attempt. The counter
is updated so early to reduce the race window since allocator checked
oom_killer_disabled which is set by PM-freezing code. A false positive
will push the PM-freezer into a slow path but that is not a big deal.

Changes since v1
- push the re-check loop out of freeze_processes into
  check_frozen_processes and invert the condition to make the code more
  readable as per Rafael

Fixes: f660daac47 (oom: thaw threads if oom killed thread is frozen before deferring)
Cc: 3.2+ <stable@vger.kernel.org> # 3.2+
Signed-off-by: Michal Hocko <mhocko@suse.cz>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-10-21 23:44:21 +02:00
Rafael J. Wysocki
49a09c9ab0 Merge branch 'pm-domains'
* pm-domains: (32 commits)
  PM / Domains: Rename cpu_data to cpuidle_data
  PM / Domains: Move dev_pm_domain_attach|detach() to pm_domain.h
  PM / Domains: Remove legacy API for adding devices through DT
  PM / Domains: Add genpd attach/detach callbacks
  PM / Domains: add debugfs listing of struct generic_pm_domain-s
  ACPI / PM: Convert acpi_dev_pm_detach() into a static function
  ARM: exynos: Move to generic PM domain DT bindings
  amba: Add support for attach/detach of PM domains
  spi: core: Convert to dev_pm_domain_attach|detach()
  mmc: sdio: Convert to dev_pm_domain_attach|detach()
  i2c: core: Convert to dev_pm_domain_attach|detach()
  drivercore / platform: Convert to dev_pm_domain_attach|detach()
  PM / Domains: Add APIs to attach/detach a PM domain for a device
  PM / Domains: Add generic OF-based PM domain look-up
  ACPI / PM: Assign the ->detach() callback when attaching the PM domain
  PM / Domains: Add a detach callback to the struct dev_pm_domain
  PM / domains: Spelling s/domian/domain/
  PM / domains: Keep declaration of dev_power_governors together
  PM / domains: Remove default_stop_ok() API
  drivers: sh: Leave disabling of unused PM domains to genpd
  ...
2014-10-07 01:18:12 +02:00
Rafael J. Wysocki
28c399e2a1 Merge branch 'acpi-pm'
* acpi-pm:
  ACPI / sleep: Rework the handling of ACPI GPE wakeup from suspend-to-idle
  PM / sleep: Rename platform suspend/resume functions in suspend.c
  PM / sleep: Export dpm_suspend_late/noirq() and dpm_resume_early/noirq()
2014-10-07 01:17:50 +02:00
Rafael J. Wysocki
0ede470030 Merge branch 'pm-sleep'
* pm-sleep:
  PM / hibernate: Iterate over set bits instead of PFNs in swsusp_free()
  PM / sleep: new suspend_resume trace event for console resume
  PM / sleep: Update test_suspend option documentation
  PM / sleep: Enhance test_suspend option with repeat capability
  PM / sleep: Support freeze as test_suspend option
  PM / sysfs: avoid shadowing variables
2014-10-07 01:17:30 +02:00
Rafael J. Wysocki
88b42a4883 Merge branch 'pm-genirq'
* pm-genirq:
  PM / genirq: Document rules related to system suspend and interrupts
  PCI / PM: Make PCIe PME interrupts wake up from suspend-to-idle
  x86 / PM: Set IRQCHIP_SKIP_SET_WAKE for IOAPIC IRQ chip objects
  genirq: Simplify wakeup mechanism
  genirq: Mark wakeup sources as armed on suspend
  genirq: Create helper for flow handler entry check
  genirq: Distangle edge handler entry
  genirq: Avoid double loop on suspend
  genirq: Move MASK_ON_SUSPEND handling into suspend_device_irqs()
  genirq: Make use of pm misfeature accounting
  genirq: Add sanity checks for PM options on shared interrupt lines
  genirq: Move suspend/resume logic into irq/pm code
  PM / sleep: Mechanism for aborting system suspends unconditionally
2014-10-07 01:17:21 +02:00
Joerg Roedel
fdd64ed54e PM / hibernate: Iterate over set bits instead of PFNs in swsusp_free()
The existing implementation of swsusp_free iterates over all
pfns in the system and checks every bit in the two memory
bitmaps.

This doesn't scale very well with large numbers of pfns,
especially when the bitmaps are not populated very densly.
Change the algorithm to iterate over the set bits in the
bitmaps instead to make it scale better in large memory
configurations.

Also add a memory_bm_clear_current() helper function that
clears the bit for the last position returned from the
memory bitmap.

This new version adds a !NULL check for the memory bitmaps
before they are walked. Not doing so causes a kernel crash
when the bitmaps are NULL.

Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-09-30 21:12:20 +02:00
Rafael J. Wysocki
a8d46b9e4e ACPI / sleep: Rework the handling of ACPI GPE wakeup from suspend-to-idle
The ACPI GPE wakeup from suspend-to-idle is currently based on using
the IRQF_NO_SUSPEND flag for the ACPI SCI, but that is problematic
for a couple of reasons.  First, in principle the ACPI SCI may be
shared and IRQF_NO_SUSPEND does not really work well with shared
interrupts.  Second, it may require the ACPI subsystem to special-case
the handling of device notifications depending on whether or not
they are received during suspend-to-idle in some places which would
lead to fragile code.  Finally, it's better the handle ACPI wakeup
interrupts consistently with wakeup interrupts from other sources.

For this reason, remove the IRQF_NO_SUSPEND flag from the ACPI SCI
and use enable_irq_wake()/disable_irq_wake() with it instead, which
requires two additional platform hooks to be added to struct
platform_freeze_ops.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-09-30 21:06:07 +02:00
Rafael J. Wysocki
ebc3e41e37 PM / sleep: Rename platform suspend/resume functions in suspend.c
Rename several local functions related to platform handling during
system suspend resume in suspend.c so that their names better
reflect their roles.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-09-30 21:05:59 +02:00