Commit Graph

155 Commits

Author SHA1 Message Date
Martin K. Petersen
e2a60da74f block: Clean up special command handling logic
Remove special-casing of non-rw fs style requests (discard). The nomerge
flags are consolidated in blk_types.h, and rq_mergeable() and
bio_mergeable() have been modified to use them.

bio_is_rw() is used in place of bio_has_data() a few places. This is
done to to distinguish true reads and writes from other fs type requests
that carry a payload (e.g. write same).

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Acked-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-09-20 14:31:38 +02:00
Tejun Heo
a2b1693bac blkcg: implement per-queue policy activation
All blkcg policies were assumed to be enabled on all request_queues.
Due to various implementation obstacles, during the recent blkcg core
updates, this was temporarily implemented as shooting down all !root
blkgs on elevator switch and policy [de]registration combined with
half-broken in-place root blkg updates.  In addition to being buggy
and racy, this meant losing all blkcg configurations across those
events.

Now that blkcg is cleaned up enough, this patch replaces the temporary
implementation with proper per-queue policy activation.  Each blkcg
policy should call the new blkcg_[de]activate_policy() to enable and
disable the policy on a specific queue.  blkcg_activate_policy()
allocates and installs policy data for the policy for all existing
blkgs.  blkcg_deactivate_policy() does the reverse.  If a policy is
not enabled for a given queue, blkg printing / config functions skip
the respective blkg for the queue.

blkcg_activate_policy() also takes care of root blkg creation, and
cfq_init_queue() and blk_throtl_init() are updated accordingly.

This replaces blkcg_bypass_{start|end}() and update_root_blkg_pd()
unnecessary.  Dropped.

v2: cfq_init_queue() was returning uninitialized @ret on root_group
    alloc failure if !CONFIG_CFQ_GROUP_IOSCHED.  Fixed.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-04-20 10:06:06 +02:00
Tejun Heo
852c788f83 block: implement bio_associate_current()
IO scheduling and cgroup are tied to the issuing task via io_context
and cgroup of %current.  Unfortunately, there are cases where IOs need
to be routed via a different task which makes scheduling and cgroup
limit enforcement applied completely incorrectly.

For example, all bios delayed by blk-throttle end up being issued by a
delayed work item and get assigned the io_context of the worker task
which happens to serve the work item and dumped to the default block
cgroup.  This is double confusing as bios which aren't delayed end up
in the correct cgroup and makes using blk-throttle and cfq propio
together impossible.

Any code which punts IO issuing to another task is affected which is
getting more and more common (e.g. btrfs).  As both io_context and
cgroup are firmly tied to task including userland visible APIs to
manipulate them, it makes a lot of sense to match up tasks to bios.

This patch implements bio_associate_current() which associates the
specified bio with %current.  The bio will record the associated ioc
and blkcg at that point and block layer will use the recorded ones
regardless of which task actually ends up issuing the bio.  bio
release puts the associated ioc and blkcg.

It grabs and remembers ioc and blkcg instead of the task itself
because task may already be dead by the time the bio is issued making
ioc and blkcg inaccessible and those are all block layer cares about.

elevator_set_req_fn() is updated such that the bio elvdata is being
allocated for is available to the elevator.

This doesn't update block cgroup policies yet.  Further patches will
implement the support.

-v2: #ifdef CONFIG_BLK_CGROUP added around bio->bi_ioc dereference in
     rq_ioc() to fix build breakage.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Kent Overstreet <koverstreet@google.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-03-06 21:27:24 +01:00
Tejun Heo
e8989fae38 blkcg: unify blkg's for blkcg policies
Currently, blkg is per cgroup-queue-policy combination.  This is
unnatural and leads to various convolutions in partially used
duplicate fields in blkg, config / stat access, and general management
of blkgs.

This patch make blkg's per cgroup-queue and let them serve all
policies.  blkgs are now created and destroyed by blkcg core proper.
This will allow further consolidation of common management logic into
blkcg core and API with better defined semantics and layering.

As a transitional step to untangle blkg management, elvswitch and
policy [de]registration, all blkgs except the root blkg are being shot
down during elvswitch and bypass.  This patch adds blkg_root_update()
to update root blkg in place on policy change.  This is hacky and racy
but should be good enough as interim step until we get locking
simplified and switch over to proper in-place update for all blkgs.

-v2: Root blkgs need to be updated on elvswitch too and blkg_alloc()
     comment wasn't updated according to the function change.  Fixed.
     Both pointed out by Vivek.

-v3: v2 updated blkg_destroy_all() to invoke update_root_blkg_pd() for
     all policies.  This freed root pd during elvswitch before the
     last queue finished exiting and led to oops.  Directly invoke
     update_root_blkg_pd() only on BLKIO_POLICY_PROP from
     cfq_exit_queue().  This also is closer to what will be done with
     proper in-place blkg update.  Reported by Vivek.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-03-06 21:27:23 +01:00
Tejun Heo
03aa264ac1 blkcg: let blkcg core manage per-queue blkg list and counter
With the previous patch to move blkg list heads and counters to
request_queue and blkg, logic to manage them in both policies are
almost identical and can be moved to blkcg core.

This patch moves blkg link logic into blkg_lookup_create(), implements
common blkg unlink code in blkg_destroy(), and updates
blkg_destory_all() so that it's policy specific and can skip root
group.  The updated blkg_destroy_all() is now used to both clear queue
for bypassing and elv switching, and release all blkgs on q exit.

This patch introduces a race window where policy [de]registration may
race against queue blkg clearing.  This can only be a problem on cfq
unload and shouldn't be a real problem in practice (and we have many
other places where this race already exists).  Future patches will
remove these unlikely races.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-03-06 21:27:23 +01:00
Tejun Heo
72e06c2551 blkcg: shoot down blkio_groups on elevator switch
Elevator switch may involve changes to blkcg policies.  Implement
shoot down of blkio_groups.

Combined with the previous bypass updates, the end goal is updating
blkcg core such that it can ensure that blkcg's being affected become
quiescent and don't have any per-blkg data hanging around before
commencing any policy updates.  Until queues are made aware of the
policies that applies to them, as an interim step, all per-policy blkg
data will be shot down.

* blk-throtl doesn't need this change as it can't be disabled for a
  live queue; however, update it anyway as the scheduled blkg
  unification requires this behavior change.  This means that
  blk-throtl configuration will be unnecessarily lost over elevator
  switch.  This oddity will be removed after blkcg learns to associate
  individual policies with request_queues.

* blk-throtl dosen't shoot down root_tg.  This is to ease transition.
  Unified blkg will always have persistent root group and not shooting
  down root_tg for now eases transition to that point by avoiding
  having to update td->root_tg and is safe as blk-throtl can never be
  disabled

-v2: Vivek pointed out that group list is not guaranteed to be empty
     on return from clear function if it raced cgroup removal and
     lost.  Fix it by waiting a bit and retrying.  This kludge will
     soon be removed once locking is updated such that blkg is never
     in limbo state between blkcg and request_queue locks.

     blk-throtl no longer shoots down root_tg to avoid breaking
     td->root_tg.

     Also, Nest queue_lock inside blkio_list_lock not the other way
     around to avoid introduce possible deadlock via blkcg lock.

-v3: blkcg_clear_queue() repositioned and renamed to
     blkg_destroy_all() to increase consistency with later changes.
     cfq_clear_queue() updated to check q->elevator before
     dereferencing it to avoid NULL dereference on not fully
     initialized queues (used by later change).

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-03-06 21:27:22 +01:00
Tejun Heo
d732580b4e block: implement blk_queue_bypass_start/end()
Rename and extend elv_queisce_start/end() to
blk_queue_bypass_start/end() which are exported and supports nesting
via @q->bypass_depth.  Also add blk_queue_bypass() to test bypass
state.

This will be further extended and used for blkio_group management.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-03-06 21:27:21 +01:00
Tejun Heo
b2fab5acd2 elevator: make elevator_init_fn() return 0/-errno
elevator_ops->elevator_init_fn() has a weird return value.  It returns
a void * which the caller should assign to q->elevator->elevator_data
and %NULL return denotes init failure.

Update such that it returns integer 0/-errno and sets elevator_data
directly as necessary.

This makes the interface more conventional and eases further cleanup.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-03-06 21:27:21 +01:00
Tejun Heo
5a5bafdc39 elevator: clear auxiliary data earlier during elevator switch
Elevator switch tries hard to keep as much as context until new
elevator is ready so that it can revert to the original state if
initializing the new elevator fails for some reason.  Unfortunately,
with more auxiliary contexts to manage, this makes elevator init and
exit paths too complex and fragile.

This patch makes elevator_switch() unregister the current elevator and
flush icq's before start initializing the new one.  As we still keep
the old elevator itself, the only difference is that we lose icq's on
rare occassions of switching failure, which isn't critical at all.

Note that this makes explicit elevator parameter to
elevator_init_queue() and __elv_register_queue() unnecessary as they
always can use the current elevator.

This patch enables block cgroup cleanups.

-v2: blk_add_trace_msg() prints elevator name from @new_e instead of
     @e->type as the local variable no longer exists.  This caused
     build failure on CONFIG_BLK_DEV_IO_TRACE.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-03-06 21:27:21 +01:00
Tejun Heo
050c8ea80e block: separate out blk_rq_merge_ok() and blk_try_merge() from elevator functions
blk_rq_merge_ok() is the elevator-neutral part of merge eligibility
test.  blk_try_merge() determines merge direction and expects the
caller to have tested elv_rq_merge_ok() previously.

elv_rq_merge_ok() now wraps blk_rq_merge_ok() and then calls
elv_iosched_allow_merge().  elv_try_merge() is removed and the two
callers are updated to call elv_rq_merge_ok() explicitly followed by
blk_try_merge().  While at it, make rq_merge_ok() functions return
bool.

This is to prepare for plug merge update and doesn't introduce any
behavior change.

This is based on Jens' patch to skip elevator_allow_merge_fn() from
plug merge.

Signed-off-by: Tejun Heo <tj@kernel.org>
LKML-Reference: <4F16F3CA.90904@kernel.dk>
Original-patch-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-02-08 09:19:38 +01:00
Jens Axboe
5d381efb3d Revert "block: recursive merge requests"
This reverts commit 274193224c.

We have some problems related to selection of empty queues
that need to be resolved, evidence so far points to the
recursive merge logic making either being the cause or at
least the accelerator for this. So revert it for now, until
we figure this out.

Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-01-15 10:29:48 +01:00
Shaohua Li
274193224c block: recursive merge requests
In my workload, thread 1 accesses a, a+2, ..., thread 2 accesses a+1,
a+3,.... When the requests are flushed to queue, a and a+1 are merged
to (a, a+1), a+2 and a+3 too to (a+2, a+3), but (a, a+1) and (a+2, a+3)
aren't merged.
With recursive merge below, the workload throughput gets improved 20%
and context switch drops 60%.

Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-12-16 14:00:31 +01:00
Tejun Heo
7e5a879449 block, cfq: move io_cq exit/release to blk-ioc.c
With kmem_cache managed by blk-ioc, io_cq exit/release can be moved to
blk-ioc too.  The odd ->io_cq->exit/release() callbacks are replaced
with elevator_ops->elevator_exit_icq_fn() with unlinking from both ioc
and q, and freeing automatically handled by blk-ioc.  The elevator
operation only need to perform exit operation specific to the elevator
- in cfq's case, exiting the cfqq's.

Also, clearing of io_cq's on q detach is moved to block core and
automatically performed on elevator switch and q release.

Because the q io_cq points to might be freed before RCU callback for
the io_cq runs, blk-ioc code should remember to which cache the io_cq
needs to be freed when the io_cq is released.  New field
io_cq->__rcu_icq_cache is added for this purpose.  As both the new
field and rcu_head are used only after io_cq is released and the
q/ioc_node fields aren't, they are put into unions.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-12-14 00:33:42 +01:00
Tejun Heo
3d3c2379fe block, cfq: move icq cache management to block core
Let elevators set ->icq_size and ->icq_align in elevator_type and
elv_register() and elv_unregister() respectively create and destroy
kmem_cache for icq.

* elv_register() now can return failure.  All callers updated.

* icq caches are automatically named "ELVNAME_io_cq".

* cfq_slab_setup/kill() are collapsed into cfq_init/exit().

* While at it, minor indentation change for iosched_cfq.elevator_name
  for consistency.

This will help moving icq management to block core.  This doesn't
introduce any functional change.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-12-14 00:33:42 +01:00
Tejun Heo
a612fddf0d block, cfq: move cfqd->icq_list to request_queue and add request->elv.icq
Most of icq management is about to be moved out of cfq into blk-ioc.
This patch prepares for it.

* Move cfqd->icq_list to request_queue->icq_list

* Make request explicitly point to icq instead of through elevator
  private data.  ->elevator_private[3] is replaced with sub struct elv
  which contains icq pointer and priv[2].  cfq is updated accordingly.

* Meaningless clearing of ->elevator_private[0] removed from
  elv_set_request().  At that point in code, the field was guaranteed
  to be %NULL anyway.

This patch doesn't introduce any functional change.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-12-14 00:33:41 +01:00
Tejun Heo
22f746e235 block: remove elevator_queue->ops
elevator_queue->ops points to the same ops struct ->elevator_type.ops
is pointing to.  The only effect of caching it in elevator_queue is
shorter notation - it doesn't save any indirect derefence.

Relocate elevator_type->list which used only during module init/exit
to the end of the structure, rename elevator_queue->elevator_type to
->type, and replace elevator_queue->ops with elevator_queue->type.ops.

This doesn't introduce any functional difference.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-12-14 00:33:41 +01:00
Tejun Heo
f8fc877d3c block: reorder elevator switch sequence
Elevator switch sequence first attached the new elevator, then tried
registering it (sysfs) and if that failed attached back the old
elevator.  However, sysfs registration doesn't require the elevator to
be attached, so there is no reason to do the "detach, attach new,
register, maybe re-attach old" sequence.  It can just do "register,
detach, attach".

* elevator_init_queue() is updated to set ->elevator_data directly and
  return 0 / -errno.  This allows elevator_exit() on an unattached
  elevator.

* __elv_unregister_queue() which was necessary to unregister
  unattached q is removed in favor of __elv_register_queue() which can
  register unattached q.

* elevator_attach() becomes a single assignment and obscures more then
  it helps.  Dropped.

This will help cleaning up io_context handling across elevator switch.

This patch doesn't introduce visible behavior change.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-12-14 00:33:40 +01:00
Tejun Heo
b9a1920837 block, cfq: remove delayed unlink
Now that all cic's are immediately unlinked from both ioc and queue,
lazy dropping from lookup path and trimming on elevator unregister are
unnecessary.  Kill them and remove now unused elevator_ops->trim().

This also leaves call_for_each_cic() without any user.  Removed.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-12-14 00:33:39 +01:00
Tejun Heo
c9a929dde3 block: fix request_queue lifetime handling by making blk_queue_cleanup() properly shutdown
request_queue is refcounted but actually depdends on lifetime
management from the queue owner - on blk_cleanup_queue(), block layer
expects that there's no request passing through request_queue and no
new one will.

This is fundamentally broken.  The queue owner (e.g. SCSI layer)
doesn't have a way to know whether there are other active users before
calling blk_cleanup_queue() and other users (e.g. bsg) don't have any
guarantee that the queue is and would stay valid while it's holding a
reference.

With delay added in blk_queue_bio() before queue_lock is grabbed, the
following oops can be easily triggered when a device is removed with
in-flight IOs.

 sd 0:0:1:0: [sdb] Stopping disk
 ata1.01: disabled
 general protection fault: 0000 [#1] PREEMPT SMP
 CPU 2
 Modules linked in:

 Pid: 648, comm: test_rawio Not tainted 3.1.0-rc3-work+ #56 Bochs Bochs
 RIP: 0010:[<ffffffff8137d651>]  [<ffffffff8137d651>] elv_rqhash_find+0x61/0x100
 ...
 Process test_rawio (pid: 648, threadinfo ffff880019efa000, task ffff880019ef8a80)
 ...
 Call Trace:
  [<ffffffff8137d774>] elv_merge+0x84/0xe0
  [<ffffffff81385b54>] blk_queue_bio+0xf4/0x400
  [<ffffffff813838ea>] generic_make_request+0xca/0x100
  [<ffffffff81383994>] submit_bio+0x74/0x100
  [<ffffffff811c53ec>] dio_bio_submit+0xbc/0xc0
  [<ffffffff811c610e>] __blockdev_direct_IO+0x92e/0xb40
  [<ffffffff811c39f7>] blkdev_direct_IO+0x57/0x60
  [<ffffffff8113b1c5>] generic_file_aio_read+0x6d5/0x760
  [<ffffffff8118c1ca>] do_sync_read+0xda/0x120
  [<ffffffff8118ce55>] vfs_read+0xc5/0x180
  [<ffffffff8118cfaa>] sys_pread64+0x9a/0xb0
  [<ffffffff81afaf6b>] system_call_fastpath+0x16/0x1b

This happens because blk_queue_cleanup() destroys the queue and
elevator whether IOs are in progress or not and DEAD tests are
sprinkled in the request processing path without proper
synchronization.

Similar problem exists for blk-throtl.  On queue cleanup, blk-throtl
is shutdown whether it has requests in it or not.  Depending on
timing, it either oopses or throttled bios are lost putting tasks
which are waiting for bio completion into eternal D state.

The way it should work is having the usual clear distinction between
shutdown and release.  Shutdown drains all currently pending requests,
marks the queue dead, and performs partial teardown of the now
unnecessary part of the queue.  Even after shutdown is complete,
reference holders are still allowed to issue requests to the queue
although they will be immmediately failed.  The rest of teardown
happens on release.

This patch makes the following changes to make blk_queue_cleanup()
behave as proper shutdown.

* QUEUE_FLAG_DEAD is now set while holding both q->exit_mutex and
  queue_lock.

* Unsynchronized DEAD check in generic_make_request_checks() removed.
  This couldn't make any meaningful difference as the queue could die
  after the check.

* blk_drain_queue() updated such that it can drain all requests and is
  now called during cleanup.

* blk_throtl updated such that it checks DEAD on grabbing queue_lock,
  drains all throttled bios during cleanup and free td when queue is
  released.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-10-19 14:42:16 +02:00
Tejun Heo
e3c78ca524 block: reorganize queue draining
Reorganize queue draining related code in preparation of queue exit
changes.

* Factor out actual draining from elv_quiesce_start() to
  blk_drain_queue().

* Make elv_quiesce_start/end() responsible for their own locking.

* Replace open-coded ELVSWITCH clearing in elevator_switch() with
  elv_quiesce_end().

This patch doesn't cause any visible functional difference.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-10-19 14:32:38 +02:00
Wang Sheng-Hui
484fc254b8 elevator: use ELV_NAME_MAX instead of magic number 16 for chosen_elevator
We have ELV_NAME_MAX defined to 16, and hence we should use it
instead of the magic nubmer 16 for elevator's name string.

Signed-off-by: Wang Sheng-Hui <shhuiw@gmail.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-09-12 08:59:20 +02:00
Jeff Moyer
796d5116c4 iosched: prevent aliased requests from starving other I/O
Hi, Jens,

If you recall, I posted an RFC patch for this back in July of last year:
http://lkml.org/lkml/2010/7/13/279

The basic problem is that a process can issue a never-ending stream of
async direct I/Os to the same sector on a device, thus starving out
other I/O in the system (due to the way the alias handling works in both
cfq and deadline).  The solution I proposed back then was to start
dispatching from the fifo after a certain number of aliases had been
dispatched.  Vivek asked why we had to treat aliases differently at all,
and I never had a good answer.  So, I put together a simple patch which
allows aliases to be added to the rb tree (it adds them to the right,
though that doesn't matter as the order isn't guaranteed anyway).  I
think this is the preferred solution, as it doesn't break up time slices
in CFQ or batches in deadline.  I've tested it, and it does solve the
starvation issue.  Let me know what you think.

Cheers,
Jeff

Signed-off-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-06-02 21:19:05 +02:00
Jens Axboe
771949d03b block: get rid of on-stack plugging debug checks
We don't need them anymore, so kill:

- REQ_ON_PLUG checks in various places
- !rq_mergeable() check in plug merging

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-05-20 20:52:16 +02:00
Jens Axboe
698567f3fa Merge commit 'v2.6.39' into for-2.6.40/core
Since for-2.6.40/core was forked off the 2.6.39 devel tree, we've
had churn in the core area that makes it difficult to handle
patches for eg cfq or blk-throttle. Instead of requiring that they
be based in older versions with bugs that have been fixed later
in the rc cycle, merge in 2.6.39 final.

Also fixes up conflicts in the below files.

Conflicts:
	drivers/block/paride/pcd.c
	drivers/cdrom/viocd.c
	drivers/ide/ide-cd.c

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-05-20 20:33:15 +02:00
Kees Cook
490b94be02 iosched: remove redundant sprintf
After the anticipatory scheduler was dropped, there was no need to
special-case the request_module string. As such, drop the redundant
sprintf and stack variable.

Signed-off-by: Kees Cook <kees.cook@canonical.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-05-05 18:02:12 -06:00
Jens Axboe
3aa72873ff elevator: check for ELEVATOR_INSERT_SORT_MERGE in !elvpriv case too
The sort insert is the one that goes to the IO scheduler. With
the SORT_MERGE addition, we could bypass IO scheduler setup
but still ask the IO scheduler to insert the request. This would
cause an oops on switching IO schedulers through the sysfs
interface, unless the disk just happened to be idle while it
occured.

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-04-21 19:28:35 +02:00
Christoph Hellwig
24ecfbe27f block: add blk_run_queue_async
Instead of overloading __blk_run_queue to force an offload to kblockd
add a new blk_run_queue_async helper to do it explicitly.  I've kept
the blk_queue_stopped check for now, but I suspect it's not needed
as the check we do when the workqueue items runs should be enough.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-04-18 11:41:33 +02:00
Jens Axboe
b710a48055 block: get rid of elv_insert() interface
Merge it with __elv_add_request(), it's pretty pointless to
have a function with only two callers. The main interface
is elv_add_request()/__elv_add_request().

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-04-05 23:51:37 +02:00
Jens Axboe
5e84ea3a9c block: attempt to merge with existing requests on plug flush
One of the disadvantages of on-stack plugging is that we potentially
lose out on merging since all pending IO isn't always visible to
everybody. When we flush the on-stack plugs, right now we don't do
any checks to see if potential merge candidates could be utilized.

Correct this by adding a new insert variant, ELEVATOR_INSERT_SORT_MERGE.
It works just ELEVATOR_INSERT_SORT, but first checks whether we can
merge with an existing request before doing the insertion (if we fail
merging).

This fixes a regression with multiple processes issuing IO that
can be merged.

Thanks to Shaohua Li <shaohua.li@intel.com> for testing and fixing
an accounting bug.

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-03-21 10:14:27 +01:00
Jens Axboe
4c63f5646e Merge branch 'for-2.6.39/stack-plug' into for-2.6.39/core
Conflicts:
	block/blk-core.c
	block/blk-flush.c
	drivers/md/raid1.c
	drivers/md/raid10.c
	drivers/md/raid5.c
	fs/nilfs2/btnode.c
	fs/nilfs2/mdt.c

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-03-10 08:58:35 +01:00
Jens Axboe
7eaceaccab block: remove per-queue plugging
Code has been converted over to the new explicit on-stack plugging,
and delay users have been converted to use the new API for that.
So lets kill off the old plugging along with aops->sync_page().

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-03-10 08:52:07 +01:00
Jens Axboe
73c1010119 block: initial patch for on-stack per-task plugging
This patch adds support for creating a queuing context outside
of the queue itself. This enables us to batch up pieces of IO
before grabbing the block device queue lock and submitting them to
the IO scheduler.

The context is created on the stack of the process and assigned in
the task structure, so that we can auto-unplug it if we hit a schedule
event.

The current queue plugging happens implicitly if IO is submitted to
an empty device, yet callers have to remember to unplug that IO when
they are going to wait for it. This is an ugly API and has caused bugs
in the past. Additionally, it requires hacks in the vm (->sync_page()
callback) to handle that logic. By switching to an explicit plugging
scheme we make the API a lot nicer and can get rid of the ->sync_page()
hack in the vm.

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-03-10 08:45:54 +01:00
Tejun Heo
e83a46bbb1 Merge branch 'for-linus' of ../linux-2.6-block into block-for-2.6.39/core
This merge creates two set of conflicts.  One is simple context
conflicts caused by removal of throtl_scheduled_delayed_work() in
for-linus and removal of throtl_shutdown_timer_wq() in
for-2.6.39/core.

The other is caused by commit 255bb490c8 (block: blk-flush shouldn't
call directly into q->request_fn() __blk_run_queue()) in for-linus
crashing with FLUSH reimplementation in for-2.6.39/core.  The conflict
isn't trivial but the resolution is straight-forward.

* __blk_run_queue() calls in flush_end_io() and flush_data_end_io()
  should be called with @force_kblockd set to %true.

* elv_insert() in blk_kick_flush() should use
  %ELEVATOR_INSERT_REQUEUE.

Both changes are to avoid invoking ->request_fn() directly from
request completion path and closely match the changes in the commit
255bb490c8.

Signed-off-by: Tejun Heo <tj@kernel.org>
2011-03-04 19:09:02 +01:00
Tejun Heo
1654e7411a block: add @force_kblockd to __blk_run_queue()
__blk_run_queue() automatically either calls q->request_fn() directly
or schedules kblockd depending on whether the function is recursed.
blk-flush implementation needs to be able to explicitly choose
kblockd.  Add @force_kblockd.

All the current users are converted to specify %false for the
parameter and this patch doesn't introduce any behavior change.

stable: This is prerequisite for fixing ide oops caused by the new
        blk-flush implementation.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jan Beulich <JBeulich@novell.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: stable@kernel.org
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-03-02 08:48:05 -05:00
Mike Snitzer
c186794dbb block: share request flush fields with elevator_private
Flush requests are never put on the IO scheduler.  Convert request
structure's elevator_private* into an array and have the flush fields
share a union with it.

Reclaim the space lost in 'struct request' by moving 'completion_data'
back in the union with 'rb_node'.

Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-02-11 11:08:00 +01:00
Tejun Heo
ae1b153962 block: reimplement FLUSH/FUA to support merge
The current FLUSH/FUA support has evolved from the implementation
which had to perform queue draining.  As such, sequencing is done
queue-wide one flush request after another.  However, with the
draining requirement gone, there's no reason to keep the queue-wide
sequential approach.

This patch reimplements FLUSH/FUA support such that each FLUSH/FUA
request is sequenced individually.  The actual FLUSH execution is
double buffered and whenever a request wants to execute one for either
PRE or POSTFLUSH, it queues on the pending queue.  Once certain
conditions are met, a flush request is issued and on its completion
all pending requests proceed to the next sequence.

This allows arbitrary merging of different type of flushes.  How they
are merged can be primarily controlled and tuned by adjusting the
above said 'conditions' used to determine when to issue the next
flush.

This is inspired by Darrick's patches to merge multiple zero-data
flushes which helps workloads with highly concurrent fsync requests.

* As flush requests are never put on the IO scheduler, request fields
  used for flush share space with rq->rb_node.  rq->completion_data is
  moved out of the union.  This increases the request size by one
  pointer.

  As rq->elevator_private* are used only by the iosched too, it is
  possible to reduce the request size further.  However, to do that,
  we need to modify request allocation path such that iosched data is
  not allocated for flush requests.

* FLUSH/FUA processing happens on insertion now instead of dispatch.

- Comments updated as per Vivek and Mike.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: "Darrick J. Wong" <djwong@us.ibm.com>
Cc: Shaohua Li <shli@kernel.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-01-25 12:43:54 +01:00
Christoph Hellwig
02e031cbc8 block: remove REQ_HARDBARRIER
REQ_HARDBARRIER is dead now, so remove the leftovers.  What's left
at this point is:

 - various checks inside the block layer.
 - sanity checks in bio based drivers.
 - now unused bio_empty_barrier helper.
 - Xen blockfront use of BLKIF_OP_WRITE_BARRIER - it's dead for a while,
   but Xen really needs to sort out it's barrier situaton.
 - setting of ordered tags in uas - dead code copied from old scsi
   drivers.
 - scsi different retry for barriers - it's dead and should have been
   removed when flushes were converted to FS requests.
 - blktrace handling of barriers - removed.  Someone who knows blktrace
   better should add support for REQ_FLUSH and REQ_FUA, though.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-11-10 14:54:09 +01:00
Jens Axboe
fa251f8990 Merge branch 'v2.6.36-rc8' into for-2.6.37/barrier
Conflicts:
	block/blk-core.c
	drivers/block/loop.c
	mm/swapfile.c

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-10-19 09:13:04 +02:00
Jens Axboe
430c62fb29 elevator: fix oops on early call to elevator_change()
2.6.36 introduces an API for drivers to switch the IO scheduler
instead of manually calling the elevator exit and init functions.
This API was added since q->elevator must be cleared in between
those two calls. And since we already have this functionality
directly from use by the sysfs interface to switch schedulers
online, it was prudent to reuse it internally too.

But this API needs the queue to be in a fully initialized state
before it is called, or it will attempt to unregister elevator
kobjects before they have been added. This results in an oops
like this:

BUG: unable to handle kernel NULL pointer dereference at 0000000000000051
IP: [<ffffffff8116f15e>] sysfs_create_dir+0x2e/0xc0
PGD 47ddfc067 PUD 47c6a1067 PMD 0
Oops: 0000 [#1] PREEMPT SMP
last sysfs file: /sys/devices/pci0000:00/0000:00:02.0/0000:04:00.1/irq
CPU 2
Modules linked in: t(+) loop hid_apple usbhid ahci ehci_hcd uhci_hcd libahci usbcore nls_base igb

Pid: 7319, comm: modprobe Not tainted 2.6.36-rc6+ #132 QSSC-S4R/QSSC-S4R
RIP: 0010:[<ffffffff8116f15e>]  [<ffffffff8116f15e>] sysfs_create_dir+0x2e/0xc0
RSP: 0018:ffff88027da25d08  EFLAGS: 00010246
RAX: ffff88047c68c528 RBX: 00000000fffffffe RCX: 0000000000000000
RDX: 000000000000002f RSI: 000000000000002f RDI: ffff88047e196c88
RBP: ffff88027da25d38 R08: 0000000000000000 R09: d84156c5635688c0
R10: d84156c5635688c0 R11: 0000000000000000 R12: ffff88047e196c88
R13: 0000000000000000 R14: 0000000000000000 R15: ffff88047c68c528
FS:  00007fcb0b26f6e0(0000) GS:ffff880287400000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 0000000000000051 CR3: 000000047e76e000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process modprobe (pid: 7319, threadinfo ffff88027da24000, task ffff88027d377090)
Stack:
 ffff88027da25d58 ffff88047c68c528 00000000fffffffe ffff88047e196c88
<0> ffff88047c68c528 ffff88047e05bd90 ffff88027da25d78 ffffffff8123fb77
<0> ffff88047e05bd90 0000000000000000 ffff88047e196c88 ffff88047c68c528
Call Trace:
 [<ffffffff8123fb77>] kobject_add_internal+0xe7/0x1f0
 [<ffffffff8123fd98>] kobject_add_varg+0x38/0x60
 [<ffffffff8123feb9>] kobject_add+0x69/0x90
 [<ffffffff8116efe0>] ? sysfs_remove_dir+0x20/0xa0
 [<ffffffff8103d48d>] ? sub_preempt_count+0x9d/0xe0
 [<ffffffff8143de20>] ? _raw_spin_unlock+0x30/0x50
 [<ffffffff8116efe0>] ? sysfs_remove_dir+0x20/0xa0
 [<ffffffff8116eff4>] ? sysfs_remove_dir+0x34/0xa0
 [<ffffffff81224204>] elv_register_queue+0x34/0xa0
 [<ffffffff81224aad>] elevator_change+0xfd/0x250
 [<ffffffffa007e000>] ? t_init+0x0/0x361 [t]
 [<ffffffffa007e000>] ? t_init+0x0/0x361 [t]
 [<ffffffffa007e0a8>] t_init+0xa8/0x361 [t]
 [<ffffffff810001de>] do_one_initcall+0x3e/0x170
 [<ffffffff8108c3fd>] sys_init_module+0xbd/0x220
 [<ffffffff81002f2b>] system_call_fastpath+0x16/0x1b
Code: e5 41 56 41 55 41 54 49 89 fc 53 48 83 ec 10 48 85 ff 74 52 48 8b 47 18 49 c7 c5 00 46 61 81 48 85 c0 74 04 4c 8b 68 30 45 31 f6 <41> 80 7d 51 00 74 0e 49 8b 44 24 28 4c 89 e7 ff 50 20 49 89 c6
RIP  [<ffffffff8116f15e>] sysfs_create_dir+0x2e/0xc0
 RSP <ffff88027da25d08>
CR2: 0000000000000051
---[ end trace a6541d3bf07945df ]---

Fix this by adding a registered bit to the elevator queue, which is
set when the sysfs kobjects have been registered.

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-10-07 09:35:16 +02:00
Tejun Heo
28e7d18452 block: drop barrier ordering by queue draining
Filesystems will take all the responsibilities for ordering requests
around commit writes and will only indicate how the commit writes
themselves should be handled by block layers.  This patch drops
barrier ordering by queue draining from block layer.  Ordering by
draining implementation was somewhat invasive to request handling.
List of notable changes follow.

* Each queue has 1 bit color which is flipped on each barrier issue.
  This is used to track whether a given request is issued before the
  current barrier or not.  REQ_ORDERED_COLOR flag and coloring
  implementation in __elv_add_request() are removed.

* Requests which shouldn't be processed yet for draining were stalled
  by returning -EAGAIN from blk_do_ordered() according to the test
  result between blk_ordered_req_seq() and blk_blk_ordered_cur_seq().
  This logic is removed.

* Draining completion logic in elv_completed_request() removed.

* All barrier sequence requests were queued to request queue and then
  trckled to lower layer according to progress and thus maintaining
  request orders during requeue was necessary.  This is replaced by
  queueing the next request in the barrier sequence only after the
  current one is complete from blk_ordered_complete_seq(), which
  removes the need for multiple proxy requests in struct request_queue
  and the request sorting logic in the ELEVATOR_INSERT_REQUEUE path of
  elv_insert().

* As barriers no longer have ordering constraints, there's no need to
  dump the whole elevator onto the dispatch queue on each barrier.
  Insert barriers at the front instead.

* If other barrier requests come to the front of the dispatch queue
  while one is already in progress, they are stored in
  q->pending_barriers and restored to dispatch queue one-by-one after
  each barrier completion from blk_ordered_complete_seq().

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-09-10 12:35:36 +02:00
Jens Axboe
5dd531a03a block: add function call to switch the IO scheduler from a driver
Currently drivers must do an elevator_exit() + elevator_init()
to switch IO schedulers. There are a few problems with this:

- Since commit 1abec4fdbb,
  elevator_init() requires a zeroed out q->elevator
  pointer. The two existing in-kernel users don't do that.

- It will only work at initialization time, since using the
  above two-staged construct does not properly quisce the queue.

So add elevator_change() which takes care of this, and convert
the elv_iosched_store() sysfs interface to use this helper as well.

Reported-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Reported-by: Kevin Vigor <kevin@vigor.nu>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-23 13:52:19 +02:00
Adrian Hunter
8d57a98ccd block: add secure discard
Secure discard is the same as discard except that all copies of the
discarded sectors (perhaps created by garbage collection) must also be
erased.

Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com>
Acked-by: Jens Axboe <axboe@kernel.dk>
Cc: Kyungmin Park <kmpark@infradead.org>
Cc: Madhusudhan Chikkature <madhu.cr@ti.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ben Gardiner <bengardiner@nanometrics.ca>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-12 08:43:30 -07:00
Christoph Hellwig
7b6d91daee block: unify flags for struct bio and struct request
Remove the current bio flags and reuse the request flags for the bio, too.
This allows to more easily trace the type of I/O from the filesystem
down to the block driver.  There were two flags in the bio that were
missing in the requests:  BIO_RW_UNPLUG and BIO_RW_AHEAD.  Also I've
renamed two request flags that had a superflous RW in them.

Note that the flags are in bio.h despite having the REQ_ name - as
blkdev.h includes bio.h that is the only way to go for now.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-07 18:20:39 +02:00
Christoph Hellwig
33659ebbae block: remove wrappers for request type/flags
Remove all the trivial wrappers for the cmd_type and cmd_flags fields in
struct requests.  This allows much easier grepping for different request
types instead of unwinding through macros.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-07 18:17:56 +02:00
Mike Snitzer
1abec4fdbb block: make blk_init_free_list and elevator_init idempotent
blk_init_allocated_queue_node may fail and the caller _could_ retry.
Accommodate the unlikely event that blk_init_allocated_queue_node is
called on an already initialized (possibly partially) request_queue.

Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-06-04 13:47:06 +02:00
Mike Snitzer
e36f724b4a block: Adjust elv_iosched_show to return "none" for bio-based DM
Bio-based DM doesn't use an elevator (queue is !blk_queue_stackable()).

Longer-term DM will not allocate an elevator for bio-based DM.  But even
then there will be small potential for an elevator to be allocated for
a request-based DM table only to have a bio-based table be loaded in the
end.

Displaying "none" for bio-based DM will help avoid user confusion.

Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-05-24 09:07:32 +02:00
Mike Snitzer
01effb0dc1 block: allow initialization of previously allocated request_queue
blk_init_queue() allocates the request_queue structure and then
initializes it as needed (request_fn, elevator, etc).

Split initialization out to blk_init_allocated_queue_node.
Introduce blk_init_allocated_queue wrapper function to model existing
blk_init_queue and blk_init_queue_node interfaces.

Export elv_register_queue to allow a newly added elevator to be
registered with sysfs.  Export elv_unregister_queue for symmetry.

These changes allow DM to initialize a device's request_queue with more
precision.  In particular, DM no longer unconditionally initializes a
full request_queue (elevator et al).  It only does so for a
request-based DM device.

Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-05-11 08:57:42 +02:00
Divyesh Shah
812d402648 blkio: Add io_merged stat
This includes both the number of bios merged into requests belonging to this
cgroup as well as the number of requests merged together.
In the past, we've observed different merging behavior across upstream kernels,
some by design some actual bugs. This stat helps a lot in debugging such
problems when applications report decreased throughput with a new kernel
version.

This needed adding an extra elevator function to capture bios being merged as I
did not want to pollute elevator code with blkiocg knowledge and hence needed
the accounting invocation to come from CFQ.

Signed-off-by: Divyesh Shah<dpshah@google.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-04-09 08:36:07 +02:00
wzt.wzt@gmail.com
a506aedc51 Block: Fix block/elevator.c elevator_get() off-by-one error
elevator_get() not check the name length, if the name length > sizeof(elv),
elv will miss the '\0'. And elv buffer will be replace "-iosched" as something
like aaaaaaaaa, then call request_module() can load an not trust module.

Signed-off-by: Zhitong Wang <zhitong.wangzt@alibaba-inc.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-04-02 08:41:14 +02:00
Emese Revfy
52cf25d0ab Driver core: Constify struct sysfs_ops in struct kobj_type
Constify struct sysfs_ops.

This is part of the ops structure constification
effort started by Arjan van de Ven et al.

Benefits of this constification:

 * prevents modification of data that is shared
   (referenced) by many other structure instances
   at runtime

 * detects/prevents accidental (but not intentional)
   modification attempts on archs that enforce
   read-only kernel data at runtime

 * potentially better optimized code as the compiler
   can assume that the const data cannot be changed

 * the compiler/linker move const data into .rodata
   and therefore exclude them from false sharing

Signed-off-by: Emese Revfy <re.emese@gmail.com>
Acked-by: David Teigland <teigland@redhat.com>
Acked-by: Matt Domsch <Matt_Domsch@dell.com>
Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com>
Acked-by: Hans J. Koch <hjk@linutronix.de>
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
Acked-by: Jens Axboe <jens.axboe@oracle.com>
Acked-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-07 17:04:49 -08:00