The EPT present/writable bits use the same position as normal
pagetable bits.
Since direct_map passes ACC_ALL to mmu_set_spte, thus always setting
the writable bit on sptes, use the generic PT_PRESENT shadow_base_pte.
Also pass present/writable error code information from EPT violation
to generic pagefault handler.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
After an interrupt injection, the PPR changes, and we have to reflect that
into the vapic. This causes a KVM_REQ_EVENT to be set, which causes the
whole interrupt injection routine to be run again (harmlessly).
Optimize by only setting KVM_REQ_EVENT if the ppr was lowered; otherwise
there is no chance that a new injection is needed.
Signed-off-by: Avi Kivity <avi@redhat.com>
ldt is never used in the kernel context; same goes for fs (x86_64) and gs
(i386). So save/restore them in the heavyweight exit path instead
of the lightweight path.
By itself, this doesn't buy us much, but it paves the way for moving vmload
and vmsave to the heavyweight exit path, since they modify the same registers.
[jan: fix copy/pase mistake on i386]
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Saving guest registers is just a memory copy, and does not need to be in the
critical section. Move outside the critical section to improve latency a
bit.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
gcc 4.5 with some special options is able to duplicate the VMX
context switch asm in vmx_vcpu_run(). This results in a compile error
because the inline asm sequence uses an on local label. The non local
label is needed because other code wants to set up the return address.
This patch moves the asm code into an own function and marks
that explicitely noinline to avoid this problem.
Better would be probably to just move it into an .S file.
The diff looks worse than the change really is, it's all just
code movement and no logic change.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
It has no user outside mmu.c and also no prototype.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
If guest indicates that it can handle async pf in kernel mode too send
it, but only if interrupts are enabled.
Acked-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
If guest can detect that it runs in non-preemptable context it can
handle async PFs at any time, so let host know that it can send async
PF even if guest cpu is not in userspace.
Acked-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Send async page fault to a PV guest if it accesses swapped out memory.
Guest will choose another task to run upon receiving the fault.
Allow async page fault injection only when guest is in user mode since
otherwise guest may be in non-sleepable context and will not be able
to reschedule.
Vcpu will be halted if guest will fault on the same page again or if
vcpu executes kernel code.
Acked-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
When async PF capability is detected hook up special page fault handler
that will handle async page fault events and bypass other page faults to
regular page fault handler. Also add async PF handling to nested SVM
emulation. Async PF always generates exit to L1 where vcpu thread will
be scheduled out until page is available.
Acked-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Keep track of memslots changes by keeping generation number in memslots
structure. Provide kvm_write_guest_cached() function that skips
gfn_to_hva() translation if memslots was not changed since previous
invocation.
Acked-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
When page is swapped in it is mapped into guest memory only after guest
tries to access it again and generate another fault. To save this fault
we can map it immediately since we know that guest is going to access
the page. Do it only when tdp is enabled for now. Shadow paging case is
more complicated. CR[034] and EFER registers should be switched before
doing mapping and then switched back.
Acked-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
If a guest accesses swapped out memory do not swap it in from vcpu thread
context. Schedule work to do swapping and put vcpu into halted state
instead.
Interrupts will still be delivered to the guest and if interrupt will
cause reschedule guest will continue to run another task.
[avi: remove call to get_user_pages_noio(), nacked by Linus; this
makes everything synchrnous again]
Acked-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
* 'for-2.6.38' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu: (30 commits)
gameport: use this_cpu_read instead of lookup
x86: udelay: Use this_cpu_read to avoid address calculation
x86: Use this_cpu_inc_return for nmi counter
x86: Replace uses of current_cpu_data with this_cpu ops
x86: Use this_cpu_ops to optimize code
vmstat: User per cpu atomics to avoid interrupt disable / enable
irq_work: Use per cpu atomics instead of regular atomics
cpuops: Use cmpxchg for xchg to avoid lock semantics
x86: this_cpu_cmpxchg and this_cpu_xchg operations
percpu: Generic this_cpu_cmpxchg() and this_cpu_xchg support
percpu,x86: relocate this_cpu_add_return() and friends
connector: Use this_cpu operations
xen: Use this_cpu_inc_return
taskstats: Use this_cpu_ops
random: Use this_cpu_inc_return
fs: Use this_cpu_inc_return in buffer.c
highmem: Use this_cpu_xx_return() operations
vmstat: Use this_cpu_inc_return for vm statistics
x86: Support for this_cpu_add, sub, dec, inc_return
percpu: Generic support for this_cpu_add, sub, dec, inc_return
...
Fixed up conflicts: in arch/x86/kernel/{apic/nmi.c, apic/x2apic_uv_x.c, process.c}
as per Tejun.
The only bit of EFER that affects the mmu is NX, and this is already
accounted for (LME only takes effect when changing cr0).
Based on a patch by Hillf Danton.
Signed-off-by: Avi Kivity <avi@redhat.com>
isr_ack is never initialized. So, until the first PIC reset, interrupts
may fail to be injected. This can cause Windows XP to fail to boot, as
reported in the fallout from the fix to
https://bugzilla.kernel.org/show_bug.cgi?id=21962.
Reported-and-tested-by: Nicolas Prochazka <prochazka.nicolas@gmail.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Go through x86 code and replace __get_cpu_var and get_cpu_var
instances that refer to a scalar and are not used for address
determinations.
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>
Acked-by: Tejun Heo <tj@kernel.org>
Acked-by: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
We use the physical address instead of the base gfn for the four
PAE page directories we use in unpaged mode. When the guest accesses
an address above 1GB that is backed by a large host page, a BUG_ON()
in kvm_mmu_set_gfn() triggers.
Resolves: https://bugzilla.kernel.org/show_bug.cgi?id=21962
Reported-and-tested-by: Nicolas Prochazka <prochazka.nicolas@gmail.com>
KVM-Stable-Tag.
Signed-off-by: Avi Kivity <avi@redhat.com>
To support xsave properly for the guest the SVM module need
software support for it. As long as this is not present do
not report the xsave as supported feature in cpuid.
As a side-effect this patch moves the bit() helper function
into the x86.h file so that it can be used in svm.c too.
KVM-Stable-Tag.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
CPUID's OSXSAVE is a mirror of CR4.OSXSAVE bit. We need to update the CPUID
after migration.
KVM-Stable-Tag.
Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
We now use load_gs_index() to load gs safely; unfortunately this also
changes MSR_KERNEL_GS_BASE, which we managed separately. This resulted
in confusion and breakage running 32-bit host userspace on a 64-bit kernel.
Fix by
- saving guest MSR_KERNEL_GS_BASE before we we reload the host's gs
- doing the host save/load unconditionally, instead of only when in guest
long mode
Things can be cleaned up further, but this is the minmal fix for now.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
If fs or gs refer to the ldt, they must be reloaded after the ldt. Reorder
the code to that effect.
Userspace code that uses the ldt with kvm is nonexistent, so this doesn't fix
a user-visible bug.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
smp_call_function_many is specified to be called only with preemption
disabled. Fulfill this requirement.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Structures kvm_vcpu_events, kvm_debugregs, kvm_pit_state2 and
kvm_clock_data are copied to userland with some padding and reserved
fields unitialized. It leads to leaking of contents of kernel stack
memory. We have to initialize them to zero.
In patch v1 Jan Kiszka suggested to fill reserved fields with zeros
instead of memset'ting the whole struct. It makes sense as these
fields are explicitly marked as padding. No more fields need zeroing.
KVM-Stable-Tag.
Signed-off-by: Vasiliy Kulikov <segooon@gmail.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
drop_spte should not attempt to rmap_remove a non present shadow pte.
This fixes a BUG_ON seen on kvm-autotest.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Reported-by: Lucas Meneghel Rodrigues <lmr@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
I have observed the following bug trigger:
1. userspace calls GET_DIRTY_LOG
2. kvm_mmu_slot_remove_write_access is called and makes a page ro
3. page fault happens and makes the page writeable
fault is logged in the bitmap appropriately
4. kvm_vm_ioctl_get_dirty_log swaps slot pointers
a lot of time passes
5. guest writes into the page
6. userspace calls GET_DIRTY_LOG
At point (5), bitmap is clean and page is writeable,
thus, guest modification of memory is not logged
and GET_DIRTY_LOG returns an empty bitmap.
The rule is that all pages are either dirty in the current bitmap,
or write-protected, which is violated here.
It seems that just moving kvm_mmu_slot_remove_write_access down
to after the slot pointer swap should fix this bug.
KVM-Stable-Tag.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
* 'kvm-updates/2.6.37' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (321 commits)
KVM: Drop CONFIG_DMAR dependency around kvm_iommu_map_pages
KVM: Fix signature of kvm_iommu_map_pages stub
KVM: MCE: Send SRAR SIGBUS directly
KVM: MCE: Add MCG_SER_P into KVM_MCE_CAP_SUPPORTED
KVM: fix typo in copyright notice
KVM: Disable interrupts around get_kernel_ns()
KVM: MMU: Avoid sign extension in mmu_alloc_direct_roots() pae root address
KVM: MMU: move access code parsing to FNAME(walk_addr) function
KVM: MMU: audit: check whether have unsync sps after root sync
KVM: MMU: audit: introduce audit_printk to cleanup audit code
KVM: MMU: audit: unregister audit tracepoints before module unloaded
KVM: MMU: audit: fix vcpu's spte walking
KVM: MMU: set access bit for direct mapping
KVM: MMU: cleanup for error mask set while walk guest page table
KVM: MMU: update 'root_hpa' out of loop in PAE shadow path
KVM: x86 emulator: Eliminate compilation warning in x86_decode_insn()
KVM: x86: Fix constant type in kvm_get_time_scale
KVM: VMX: Add AX to list of registers clobbered by guest switch
KVM guest: Move a printk that's using the clock before it's ready
KVM: x86: TSC catchup mode
...
Originally, SRAR SIGBUS is sent to QEMU-KVM via touching the poisoned
page. But commit 9605456919 prevents the
signal from being sent. So now the signal is sent via
force_sig_info_fault directly.
[marcelo: use send_sig_info instead]
Reported-by: Dean Nelson <dnelson@redhat.com>
Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Now we have MCG_SER_P (and corresponding SRAO/SRAR MCE) support in
kernel and QEMU-KVM, the MCG_SER_P should be added into
KVM_MCE_CAP_SUPPORTED to make all these code really works.
Reported-by: Dean Nelson <dnelson@redhat.com>
Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
get_kernel_ns() wants preemption disabled. It doesn't make a lot of sense
during the get/set ioctls (no way to make them non-racy) but the callee wants
it.
Signed-off-by: Avi Kivity <avi@redhat.com>
Move access code parsing from caller site to FNAME(walk_addr) function
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
After root synced, all unsync sps are synced, this patch add a check to make
sure it's no unsync sps in VCPU's page table
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Introduce audit_printk, and record audit point instead audit name
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
After nested nested paging, it may using long mode to shadow 32/PAE paging
guest, so this patch fix it
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Set access bit while setup up direct page table if it's nonpaing or npt enabled,
it's good for CPU's speculate access
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
The value of 'vcpu->arch.mmu.pae_root' is not modified, so we can update
'root_hpa' out of the loop.
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Eliminate:
arch/x86/kvm/emulate.c:801: warning: ‘sv’ may be used uninitialized in this
function
on gcc 4.1.2
Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Older gcc versions complain about the improper type (for x86-32), 4.5
seems to fix this silently. However, we should better use the right type
initially.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
By chance this caused no harm so far. We overwrite AX during switch
to/from guest context, so we must declare this.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Negate the effects of AN TYM spell while kvm thread is preempted by tracking
conversion factor to the highest TSC rate and catching the TSC up when it has
fallen behind the kernel view of time. Note that once triggered, we don't
turn off catchup mode.
A slightly more clever version of this is possible, which only does catchup
when TSC rate drops, and which specifically targets only CPUs with broken
TSC, but since these all are considered unstable_tsc(), this patch covers
all necessary cases.
Signed-off-by: Zachary Amsden <zamsden@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
This just changes some names to better reflect the usage they
will be given. Separated out to keep confusion to a minimum.
Signed-off-by: Zachary Amsden <zamsden@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
The math in kvm_get_time_scale relies on the fact that
NSEC_PER_SEC < 2^32. To use the same function to compute
arbitrary time scales, we must extend the first reduction
step to shrink the base rate to a 32-bit value, and
possibly reduce the scaled rate into a 32-bit as well.
Note we must take care to avoid an arithmetic overflow
when scaling up the tps32 value (this could not happen
with the fixed scaled value of NSEC_PER_SEC, but can
happen with scaled rates above 2^31.
Signed-off-by: Zachary Amsden <zamsden@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
If an interrupt is pending, we need to stop emulation so we
can inject it.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Replace the inject-as-software-interrupt hack we currently have with
emulated injection.
Signed-off-by: Mohammed Gamal <m.gamal005@gmail.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
This adds a wrapper function kvm_inject_realmode_interrupt() around the
emulator function emulate_int_real() to allow real mode interrupt injection.
[avi: initialize operand and address sizes before emulating interrupts]
[avi: initialize rip for real mode interrupt injection]
[avi: clear interrupt pending flag after emulating interrupt injection]
Signed-off-by: Mohammed Gamal <m.gamal005@gmail.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Nested SVM checks for external interrupt after injecting nested exception.
In case there is external interrupt pending the code generates "external
interrupt exit" and overwrites previous exit info. If previously injected
exception already generated exit it will be lost.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Acked-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
The PIC code used to be called from preempt_disable() context, which
wasn't very good for PREEMPT_RT. That is no longer the case, so move
back from raw_spinlock_t to spinlock_t.
Signed-off-by: Avi Kivity <avi@redhat.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
If preempted after kvmclock values are updated, but before hardware
virtualization is entered, the last tsc time as read by the guest is
never set. It underflows the next time kvmclock is updated if there
has not yet been a successful entry / exit into hardware virt.
Fix this by simply setting last_tsc to the newly read tsc value so
that any computed nsec advance of kvmclock is nulled.
Signed-off-by: Zachary Amsden <zamsden@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
This patch moves the detection whether a page-fault was
nested or not out of the error code and moves it into a
separate variable in the fault struct.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Change the interrupt injection code to work from preemptible, interrupts
enabled context. This works by adding a ->cancel_injection() operation
that undoes an injection in case we were not able to actually enter the guest
(this condition could never happen with atomic injection).
Signed-off-by: Avi Kivity <avi@redhat.com>
Currently vmx_complete_interrupts() can decode event information from vmx
exit fields into the generic kvm event queues. Make it able to decode
the information from the entry fields as well by parametrizing it.
Signed-off-by: Avi Kivity <avi@redhat.com>
vmx_complete_interrupts() does too much, split it up:
- vmx_vcpu_run() gets the "cache important vmcs fields" part
- a new vmx_complete_atomic_exit() gets the parts that must be done atomically
- a new vmx_recover_nmi_blocking() does what its name says
- vmx_complete_interrupts() retains the event injection recovery code
This helps in reducing the work done in atomic context.
Signed-off-by: Avi Kivity <avi@redhat.com>
Instead of blindly attempting to inject an event before each guest entry,
check for a possible event first in vcpu->requests. Sites that can trigger
event injection are modified to set KVM_REQ_EVENT:
- interrupt, nmi window opening
- ppr updates
- i8259 output changes
- local apic irr changes
- rflags updates
- gif flag set
- event set on exit
This improves non-injecting entry performance, and sets the stage for
non-atomic injection.
Signed-off-by: Avi Kivity <avi@redhat.com>
Commit "KVM: MMU: Make tdp_enabled a mmu-context parameter" made real-mode
set ->direct_map, and changed the code that merges in the memory type depend
on direct_map instead of tdp_enabled. However, in this case what really
matters is tdp, not direct_map, since tdp changes the pte format regardless
of whether the mapping is direct or not.
As a result, real-mode shadow mappings got corrupted with ept memory types.
The result was a huge slowdown, likely due to the cache being disabled.
Change it back as the simplest fix for the regression (real fix is to move
all that to vmx code, and not use tdp_enabled as a synonym for ept).
Signed-off-by: Avi Kivity <avi@redhat.com>
This patch fixes a bug in KVM where it _always_ reports the
support of the SVM feature to userspace. But KVM only
supports SVM on AMD hardware and only when it is enabled in
the kernel module. This patch fixes the wrong reporting.
Cc: stable@kernel.org
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
This patch implements the reporting of the nested paging
feature support to userspace.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
This patch adds INTR and NMI intercepts to the list of
expected intercepts with an exit_int_info set. While this
can't happen on bare metal it is architectural legal and may
happen with KVMs SVM emulation.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
This patch adds code to initialize the Nested Nested Paging
MMU context when the L1 guest executes a VMRUN instruction
and has nested paging enabled in its VMCB.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
This patch adds the helper functions which will be used in
the mmu context for handling nested nested page faults.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
With Nested Paging emulation the NX state between the two
MMU contexts may differ. To make sure that always the right
fault error code is recorded this patch moves the NX state
into struct kvm_mmu so that the code can distinguish between
L1 and L2 NX state.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Currently the KVM softmmu implementation can not shadow a 32
bit legacy or PAE page table with a long mode page table.
This is a required feature for nested paging emulation
because the nested page table must alway be in host format.
So this patch implements the missing pieces to allow long
mode page tables for page table types.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
This patch factors out the direct-mapping paths of the
mmu_alloc_roots function into a seperate function. This
makes it a lot easier to avoid all the unnecessary checks
done in the shadow path which may break when running direct.
In fact, this patch already fixes a problem when running PAE
guests on a PAE shadow page table.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
This function is implemented to load the pdptr pointers of
the currently running guest (l1 or l2 guest). Therefore it
takes care about the current paging mode and can read pdptrs
out of l2 guest physical memory.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
This function need to be able to load the pdptrs from any
mmu context currently in use. So change this function to
take an kvm_mmu parameter to fit these needs.
As a side effect this patch also moves the cached pdptrs
from vcpu_arch into the kvm_mmu struct.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
KVM currently ignores fetch faults in the instruction
emulator. With nested-npt we could have such faults. This
patch adds the code to handle these.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
This patch implements logic to make sure that either a
page-fault/page-fault-vmexit or a nested-page-fault-vmexit
is propagated back to the guest.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
This patch introduces the init_kvm_nested_mmu() function
which is used to re-initialize the nested mmu when the l2
guest changes its paging mode.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
This patch introduces the kvm_read_guest_page_x86 function
which reads from the physical memory of the guest. If the
guest is running in guest-mode itself with nested paging
enabled it will read from the guest's guest physical memory
instead.
The patch also changes changes the code to use this function
where it is necessary.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
This patch uses kvm_read_guest_page_tdp to make the
walk_addr_generic functions suitable for two-level page
table walking.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
This patch adds a function which can read from the guests
physical memory or from the guest's guest physical memory.
This will be used in the two-dimensional page table walker.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
This patch adds the functions to do a nested l2_gva to
l1_gpa page table walk.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
This patch introduces the walk_mmu pointer which points to
the mmu-context currently used for gva_to_gpa translations.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
This patch introduces a mmu-callback to translate gpa
addresses in the walk_addr code. This is later used to
translate l2_gpa addresses into l1_gpa addresses.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
This is the first patch in the series towards a generic
walk_addr implementation which could walk two-dimensional
page tables in the end. In this first step the walk_addr
function is renamed into walk_addr_generic which takes a
mmu context as an additional parameter.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
This patch introduces a struct with two new fields in
vcpu_arch for x86:
* fault.address
* fault.error_code
This will be used to correctly propagate page faults back
into the guest when we could have either an ordinary page
fault or a nested page fault. In the case of a nested page
fault the fault-address is different from the original
address that should be walked. So we need to keep track
about the real fault-address.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
This patch changes is_rsvd_bits_set() function prototype to
take only a kvm_mmu context instead of a full vcpu.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Some logic of the init_kvm_softmmu function is required to
build the Nested Nested Paging context. So factor the
required logic into a seperate function and export it.
Also make the whole init path suitable for more than one mmu
context.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
This patch introduces an inject_page_fault function pointer
into struct kvm_mmu which will be used to inject a page
fault. This will be used later when Nested Nested Paging is
implemented.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
This function pointer in the MMU context is required to
implement Nested Nested Paging.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
This patch introduces a special set_tdp_cr3 function pointer
in kvm_x86_ops which is only used for tpd enabled mmu
contexts. This allows to remove some hacks from svm code.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
This is necessary to implement Nested Nested Paging. As a
side effect this allows some cleanups in the SVM nested
paging code.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
This patch changes the tdp_enabled flag from its global
meaning to the mmu-context and renames it to direct_map
there. This is necessary for Nested SVM with emulation of
Nested Paging where we need an extra MMU context to shadow
the Nested Nested Page Table.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
The walk_addr function checks for !is_long_mode in its 64
bit version. But what is meant here is a check for pae
paging. Change the condition to really check for pae paging
so that it also works with nested nested paging.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Some operating systems store data about the host processor at the
time of installation, and when booted on a more uptodate cpu tries
to read MSR_EBC_FREQUENCY_ID. This has been found with XP.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
This patch changes the rip handling in the vmrun emulation
path from using next_rip to the generic kvm register access
functions.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
This patch implements restoring of the correct rip, rsp, and
rax after the svm emulation in KVM injected a selective_cr0
write intercept into the guest hypervisor. The problem was
that the vmexit is emulated in the instruction emulation
which later commits the registers right after the write-cr0
instruction. So the l1 guest will continue to run with the
l2 rip, rsp and rax resulting in unpredictable behavior.
This patch is not the final word, it is just an easy patch
to fix the issue. The real fix will be done when the
instruction emulator is made aware of nested virtualization.
Until this is done this patch fixes the issue and provides
an easy way to fix this in -stable too.
Cc: stable@kernel.org
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
This patch fixes 32 bit legacy paging with NPT enabled. The
mmu_check_root call on the top-level of the loop causes
root_gfn to take values (in the tdp_enabled path) which are
outside of guest memory. So the mmu_check_root call fails at
some point in the loop interation causing the guest to
tiple-fault.
This patch changes the mmu_check_root calls to the places
where they are really necessary. As a side-effect it
introduces a check for the root of a pae page table too.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
The audit is very high overhead, so we need lower the frequency to assure
the guest is running.
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Both audit_mappings() and audit_sptes_have_rmaps() need to walk vcpu's page
table, so we can do these checking in a spte walking
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Both audit_rmap() and audit_write_protection() need to walk all active sp, so
we can do these checking in a sp walking
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Move the audit code from arch/x86/kvm/mmu.c to arch/x86/kvm/mmu_audit.c
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Add a r/w module parameter named 'mmu_audit', it can control audit
enable/disable:
enable:
echo 1 > /sys/module/kvm/parameters/mmu_audit
disable:
echo 0 > /sys/module/kvm/parameters/mmu_audit
This patch not change the logic
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
MSR_K7_CLK_CTL is a no longer documented MSR, which is only relevant
on said old AMD CPU models. This change returns the expected value,
which the Linux kernel is expecting to avoid writing back the MSR,
plus it ignores all writes to the MSR.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
ICW is not a full reset, instead it resets a limited number of registers
in the PIC. Change ICW1 emulation to only reset those registers.
Signed-off-by: Avi Kivity <avi@redhat.com>
x86_emulate_insn() is full of things like
if (rc != X86EMUL_CONTINUE)
goto done;
break;
consolidate all of those at the end of the switch statement.
Signed-off-by: Avi Kivity <avi@redhat.com>
Otherwise EFER_LMA bit is retained across a SIPI reset.
Fixes guest cpu onlining.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Since commit aad827034e no mmu reinitialization is performed
via init_vmcb.
Zero vcpu->arch.cr0 and pass the reset value as a parameter to
kvm_set_cr0.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Nothing is checked in count_rmaps(), so remove it
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
There is a bugs in this function, we call gfn_to_pfn() and kvm_mmu_gva_to_gpa_read() in
atomic context(kvm_mmu_audit() is called under the spinlock(mmu_lock)'s protection).
This patch fix it by:
- introduce gfn_to_pfn_atomic instead of gfn_to_pfn
- get the mapping gfn from kvm_mmu_page_get_gfn()
And it adds 'notrap' ptes check in unsync/direct sps
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
The audit code reports some sp not write protected in current code, it's just the
bug in audit_write_protection(), since:
- the invalid sp not need write protected
- using uninitialize local variable('gfn')
- call kvm_mmu_audit() out of mmu_lock's protection
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
The read-only spte also has reverse mapping, so fix the code to check them,
also modify the function name to fit its doing
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
fix:
arch/x86/kvm/mmu.c: In function ‘kvm_mmu_unprotect_page’:
arch/x86/kvm/mmu.c:1741: warning: format ‘%lx’ expects type ‘long unsigned int’, but argument 3 has type ‘gfn_t’
arch/x86/kvm/mmu.c:1745: warning: format ‘%lx’ expects type ‘long unsigned int’, but argument 3 has type ‘gfn_t’
arch/x86/kvm/mmu.c: In function ‘mmu_unshadow’:
arch/x86/kvm/mmu.c:1761: warning: format ‘%lx’ expects type ‘long unsigned int’, but argument 3 has type ‘gfn_t’
arch/x86/kvm/mmu.c: In function ‘set_spte’:
arch/x86/kvm/mmu.c:2005: warning: format ‘%lx’ expects type ‘long unsigned int’, but argument 3 has type ‘gfn_t’
arch/x86/kvm/mmu.c: In function ‘mmu_set_spte’:
arch/x86/kvm/mmu.c:2033: warning: format ‘%lx’ expects type ‘long unsigned int’, but argument 7 has type ‘gfn_t’
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Pit interrupt injection was done by workqueue, so no need to check
pending pit timer in vcpu thread which could lead unnecessary
unblocking of vcpu.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
The ALU opcode block is very regular; introduce D6ALU() to define decode
flags for 6 instructions at a time.
Suggested by Paolo Bonzini.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Many x86 instructions come in byte and word variants distinguished with bit
0 of the opcode. Add macros to aid in defining them.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
SrcMemFAddr is not defined with the modrm operand designating a register
instead of a memory address.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
x86_emulate_insn() will return 1 if instruction can be restarted
without re-entering a guest.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Support prefetch ptes when intercept guest #PF, avoid to #PF by later
access
If we meet any failure in the prefetch path, we will exit it and
not try other ptes to avoid become heavy path
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Kernel time, which advances in discrete steps may progress much slower
than TSC. As a result, when kvmclock is adjusted to a new base, the
apparent time to the guest, which runs at a much higher, nsec scaled
rate based on the current TSC, may have already been observed to have
a larger value (kernel_ns + scaled tsc) than the value to which we are
setting it (kernel_ns + 0).
We must instead compute the clock as potentially observed by the guest
for kernel_ns to make sure it does not go backwards.
Signed-off-by: Zachary Amsden <zamsden@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
If there are active VCPUs which are marked as belonging to
a particular hardware CPU, request a clock sync for them when
enabling hardware; the TSC could be desynchronized on a newly
arriving CPU, and we need to recompute guests system time
relative to boot after a suspend event.
This covers both cases.
Note that it is acceptable to take the spinlock, as either
no other tasks will be running and no locks held (BSP after
resume), or other tasks will be guaranteed to drop the lock
relatively quickly (AP on CPU_STARTING).
Noting we now get clock synchronization requests for VCPUs
which are starting up (or restarting), it is tempting to
attempt to remove the arch/x86/kvm/x86.c CPU hot-notifiers
at this time, however it is not correct to do so; they are
required for systems with non-constant TSC as the frequency
may not be known immediately after the processor has started
until the cpufreq driver has had a chance to run and query
the chipset.
Updated: implement better locking semantics for hardware_enable
Removed the hack of dropping and retaking the lock by adding the
semantic that we always hold kvm_lock when hardware_enable is
called. The one place that doesn't need to worry about it is
resume, as resuming a frozen CPU, the spinlock won't be taken.
Signed-off-by: Zachary Amsden <zamsden@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Make the match of TSC find TSC writes that are close to each other
instead of perfectly identical; this allows the compensator to also
work in migration / suspend scenarios.
Signed-off-by: Zachary Amsden <zamsden@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Add a helper function to compute the kernel time and convert nanoseconds
back to CPU specific cycles. Note that these must not be called in preemptible
context, as that would mean the kernel could enter software suspend state,
which would cause non-atomic operation.
Also, convert the KVM_SET_CLOCK / KVM_GET_CLOCK ioctls to use the kernel
time helper, these should be bootbased as well.
Signed-off-by: Zachary Amsden <zamsden@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
When CPUs with unstable TSCs enter deep C-state, TSC may stop
running. This causes us to require resynchronization. Since
we can't tell when this may potentially happen, we assume the
worst by forcing re-compensation for it at every point the VCPU
task is descheduled.
Signed-off-by: Zachary Amsden <zamsden@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Move the TSC control logic from the vendor backends into x86.c
by adding adjust_tsc_offset to x86 ops. Now all TSC decisions
can be done in one place.
Signed-off-by: Zachary Amsden <zamsden@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
If creating an SMP guest with unstable host TSC, issue a warning
Signed-off-by: Zachary Amsden <zamsden@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
This simplifies much of the init code; we can now simply always
call tsc_khz_changed, optionally passing it a new value, or letting
it figure out the existing value (while interrupts are disabled, and
thus, by inference from the rule, not raceful against CPU hotplug or
frequency updates, which will issue IPIs to the local CPU to perform
this very same task).
Signed-off-by: Zachary Amsden <zamsden@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Attempt to synchronize TSCs which are reset to the same value. In the
case of a reliable hardware TSC, we can just re-use the same offset, but
on non-reliable hardware, we can get closer by adjusting the offset to
match the elapsed time.
Signed-off-by: Zachary Amsden <zamsden@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Also, ensure that the storing of the offset and the reading of the TSC
are never preempted by taking a spinlock. While the lock is overkill
now, it is useful later in this patch series.
Signed-off-by: Zachary Amsden <zamsden@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Change svm / vmx to be the same internally and write TSC offset
instead of bare TSC in helper functions. Isolated as a single
patch to contain code movement.
Signed-off-by: Zachary Amsden <zamsden@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
This is used only by the VMX code, and is not done properly;
if the TSC is indeed backwards, it is out of sync, and will
need proper handling in the logic at each and every CPU change.
For now, drop this test during init as misguided.
Signed-off-by: Zachary Amsden <zamsden@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
commit ad05c88266b4cce1c820928ce8a0fb7690912ba1
(KVM: create aggregate kvm_total_used_mmu_pages value)
introduce percpu counter kvm_total_used_mmu_pages but never
destroy it, this may cause oops when rmmod & modprobe.
Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Acked-by: Tim Pepper <lnxninja@linux.vnet.ibm.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
