Commit Graph

9572 Commits

Author SHA1 Message Date
Robert Love
0db0e377ab libfcoe: Fix fcoe_sysfs VN2VN mode
The libfc discovery layer is being initialized in the
'create' paths for both legacy libfcoe module parameters
and fcoe_sysfs control interfaces. The problem is that
for VN2VN mode the discovery layer is initialized as if
it were in 'fabric' mode and it is not re-configured when
the mode is changed to 'vn2vn'.

This patch splits out code that needs to be initialized
once and code that can, and should be, re-configured when
the mode changes. Additionally this patch makes that change
so that the discovery layer can be reconfigured to the
libfcoe implementation when in 'vn2vn' mode.

Signed-off-by: Robert Love <robert.w.love@intel.com>
Tested-by: Jack Morgan <jack.morgan@intel.com>
Reviewed-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com>
2013-03-25 16:04:22 -07:00
Robert Love
0807619d3c libfc, fcoe, bnx2fc: Split fc_disc_init into fc_disc_{init, config}
Split discovery initialization in code that is setup once (fcoe_disc_init)
and code that can be re-configured (fcoe_disc_config).

Signed-off-by: Robert Love <robert.w.love@intel.com>
Tested-by: Jack Morgan <jack.morgan@intel.com>
Reviewed-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com>
2013-03-25 16:03:03 -07:00
Robert Love
8a9a713812 libfc, fcoe, bnx2fc: Always use fcoe_disc_init for discovery layer initialization
Currently libfcoe is doing some libfc discovery layer initialization outside of
libfc. This patch moves this code into libfc and sets up a split in discovery
(one time) initialization code and (re-configurable) settings that will come in
the next patch.

Signed-off-by: Robert Love <robert.w.love@intel.com>
Tested-by: Jack Morgan <jack.morgan@intel.com>
Reviewed-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com>
2013-03-25 16:01:10 -07:00
Robert Love
f9c4358edb fcoe: Fix deadlock between create and destroy paths
We can deadlock (s_active and fcoe_config_mutex) if a
port is being destroyed at the same time one is being created.

[ 4200.503113] ======================================================
[ 4200.503114] [ INFO: possible circular locking dependency detected ]
[ 4200.503116] 3.8.0-rc5+ #8 Not tainted
[ 4200.503117] -------------------------------------------------------
[ 4200.503118] kworker/3:2/2492 is trying to acquire lock:
[ 4200.503119]  (s_active#292){++++.+}, at: [<ffffffff8122d20b>] sysfs_addrm_finish+0x3b/0x70
[ 4200.503127]
but task is already holding lock:
[ 4200.503128]  (fcoe_config_mutex){+.+.+.}, at: [<ffffffffa02f3338>] fcoe_destroy_work+0xe8/0x120 [fcoe]
[ 4200.503133]
which lock already depends on the new lock.

[ 4200.503135]
the existing dependency chain (in reverse order) is:
[ 4200.503136]
-> #1 (fcoe_config_mutex){+.+.+.}:
[ 4200.503139]        [<ffffffff810c7711>] lock_acquire+0xa1/0x140
[ 4200.503143]        [<ffffffff816ca7be>] mutex_lock_nested+0x6e/0x360
[ 4200.503146]        [<ffffffffa02f11bd>] fcoe_enable+0x1d/0xb0 [fcoe]
[ 4200.503148]        [<ffffffffa02f127d>] fcoe_ctlr_enabled+0x2d/0x50 [fcoe]
[ 4200.503151]        [<ffffffffa02ffbe8>] store_ctlr_enabled+0x38/0x90 [libfcoe]
[ 4200.503154]        [<ffffffff81424878>] dev_attr_store+0x18/0x30
[ 4200.503157]        [<ffffffff8122b750>] sysfs_write_file+0xe0/0x150
[ 4200.503160]        [<ffffffff811b334c>] vfs_write+0xac/0x180
[ 4200.503162]        [<ffffffff811b3692>] sys_write+0x52/0xa0
[ 4200.503164]        [<ffffffff816d7159>] system_call_fastpath+0x16/0x1b
[ 4200.503167]
-> #0 (s_active#292){++++.+}:
[ 4200.503170]        [<ffffffff810c680f>] __lock_acquire+0x135f/0x1c90
[ 4200.503172]        [<ffffffff810c7711>] lock_acquire+0xa1/0x140
[ 4200.503174]        [<ffffffff8122c626>] sysfs_deactivate+0x116/0x160
[ 4200.503176]        [<ffffffff8122d20b>] sysfs_addrm_finish+0x3b/0x70
[ 4200.503178]        [<ffffffff8122b2eb>] sysfs_hash_and_remove+0x5b/0xb0
[ 4200.503180]        [<ffffffff8122f3d1>] sysfs_remove_group+0x61/0x100
[ 4200.503183]        [<ffffffff814251eb>] device_remove_groups+0x3b/0x60
[ 4200.503185]        [<ffffffff81425534>] device_remove_attrs+0x44/0x80
[ 4200.503187]        [<ffffffff81425e97>] device_del+0x127/0x1c0
[ 4200.503189]        [<ffffffff81425f52>] device_unregister+0x22/0x60
[ 4200.503191]        [<ffffffffa0300970>] fcoe_ctlr_device_delete+0xe0/0xf0 [libfcoe]
[ 4200.503194]        [<ffffffffa02f1b5c>] fcoe_interface_cleanup+0x6c/0xa0 [fcoe]
[ 4200.503196]        [<ffffffffa02f3355>] fcoe_destroy_work+0x105/0x120 [fcoe]
[ 4200.503198]        [<ffffffff8107ee91>] process_one_work+0x1a1/0x580
[ 4200.503203]        [<ffffffff81080c6e>] worker_thread+0x15e/0x440
[ 4200.503205]        [<ffffffff8108715a>] kthread+0xea/0xf0
[ 4200.503207]        [<ffffffff816d70ac>] ret_from_fork+0x7c/0xb0

[ 4200.503209]
other info that might help us debug this:

[ 4200.503211]  Possible unsafe locking scenario:

[ 4200.503212]        CPU0                    CPU1
[ 4200.503213]        ----                    ----
[ 4200.503214]   lock(fcoe_config_mutex);
[ 4200.503215]                                lock(s_active#292);
[ 4200.503218]                                lock(fcoe_config_mutex);
[ 4200.503219]   lock(s_active#292);
[ 4200.503221]
 *** DEADLOCK ***

[ 4200.503223] 3 locks held by kworker/3:2/2492:
[ 4200.503224]  #0:  (fcoe){.+.+.+}, at: [<ffffffff8107ee2b>] process_one_work+0x13b/0x580
[ 4200.503228]  #1:  ((&port->destroy_work)){+.+.+.}, at: [<ffffffff8107ee2b>] process_one_work+0x13b/0x580
[ 4200.503232]  #2:  (fcoe_config_mutex){+.+.+.}, at: [<ffffffffa02f3338>] fcoe_destroy_work+0xe8/0x120 [fcoe]
[ 4200.503236]
stack backtrace:
[ 4200.503238] Pid: 2492, comm: kworker/3:2 Not tainted 3.8.0-rc5+ #8
[ 4200.503240] Call Trace:
[ 4200.503243]  [<ffffffff816c2f09>] print_circular_bug+0x1fb/0x20c
[ 4200.503246]  [<ffffffff810c680f>] __lock_acquire+0x135f/0x1c90
[ 4200.503248]  [<ffffffff810c463a>] ? debug_check_no_locks_freed+0x9a/0x180
[ 4200.503250]  [<ffffffff810c7711>] lock_acquire+0xa1/0x140
[ 4200.503253]  [<ffffffff8122d20b>] ? sysfs_addrm_finish+0x3b/0x70
[ 4200.503255]  [<ffffffff8122c626>] sysfs_deactivate+0x116/0x160
[ 4200.503258]  [<ffffffff8122d20b>] ? sysfs_addrm_finish+0x3b/0x70
[ 4200.503260]  [<ffffffff8122d20b>] sysfs_addrm_finish+0x3b/0x70
[ 4200.503262]  [<ffffffff8122b2eb>] sysfs_hash_and_remove+0x5b/0xb0
[ 4200.503265]  [<ffffffff8122f3d1>] sysfs_remove_group+0x61/0x100
[ 4200.503273]  [<ffffffff814251eb>] device_remove_groups+0x3b/0x60
[ 4200.503275]  [<ffffffff81425534>] device_remove_attrs+0x44/0x80
[ 4200.503277]  [<ffffffff81425e97>] device_del+0x127/0x1c0
[ 4200.503279]  [<ffffffff81425f52>] device_unregister+0x22/0x60
[ 4200.503282]  [<ffffffffa0300970>] fcoe_ctlr_device_delete+0xe0/0xf0 [libfcoe]
[ 4200.503285]  [<ffffffffa02f1b5c>] fcoe_interface_cleanup+0x6c/0xa0 [fcoe]
[ 4200.503287]  [<ffffffffa02f3355>] fcoe_destroy_work+0x105/0x120 [fcoe]
[ 4200.503290]  [<ffffffff8107ee91>] process_one_work+0x1a1/0x580
[ 4200.503292]  [<ffffffff8107ee2b>] ? process_one_work+0x13b/0x580
[ 4200.503295]  [<ffffffffa02f3250>] ? fcoe_if_destroy+0x230/0x230 [fcoe]
[ 4200.503297]  [<ffffffff81080c6e>] worker_thread+0x15e/0x440
[ 4200.503299]  [<ffffffff81080b10>] ? busy_worker_rebind_fn+0x100/0x100
[ 4200.503301]  [<ffffffff8108715a>] kthread+0xea/0xf0
[ 4200.503304]  [<ffffffff81087070>] ? kthread_create_on_node+0x160/0x160
[ 4200.503306]  [<ffffffff816d70ac>] ret_from_fork+0x7c/0xb0
[ 4200.503308]  [<ffffffff81087070>] ? kthread_create_on_node+0x160/0x160

Signed-off-by: Robert Love <robert.w.love@intel.com>
Tested-by: Jack Morgan <jack.morgan@intel.com>
2013-03-25 15:55:56 -07:00
Robert Love
01bdcb626f bnx2fc: Make the fcoe_cltr the SCSI host parent
The fcoemon userspace daemon is searching for the a hostX
under the the /sys/bus/fcoe/devices/ctlrX/ entries. When
interfaces created using fcoe_sysfs and fcoe.ko this linkage
is setup correctly, but bnx2fc is not doing the same thing
and therefore fcoemon does not create the fcoe interface
for bnx2fc.

This patch sets up the correct linkage for bnx2fc such that
fcoemon will work correctly with fcoe_sysfs and bnx2fc.

Signed-off-by: Robert Love <robert.w.love@intel.com>
Acked-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com>
2013-03-25 12:19:15 -07:00
Rafael J. Wysocki
53540098b2 ACPI / glue: Add .match() callback to struct acpi_bus_type
USB uses the .find_bridge() callback from struct acpi_bus_type
incorrectly, because as a result of the way it is used by USB every
device in the system that doesn't have a bus type or parent is
passed to usb_acpi_find_device() for inspection.

What USB actually needs, though, is to call usb_acpi_find_device()
for USB ports that don't have a bus type defined, but have
usb_port_device_type as their device type, as well as for USB
devices.

To fix that replace the struct bus_type pointer in struct
acpi_bus_type used for matching devices to specific subsystems
with a .match() callback to be used for this purpose and update
the users of struct acpi_bus_type, including USB, accordingly.
Define the .match() callback routine for USB, usb_acpi_bus_match(),
in such a way that it will cover both USB devices and USB ports
and remove the now redundant .find_bridge() callback pointer from
usb_acpi_bus.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Yinghai Lu <yinghai@kernel.org>
Acked-by: Jeff Garzik <jgarzik@pobox.com>
2013-03-04 14:23:40 +01:00
Linus Torvalds
426d266c12 SCSI for-linus on 20130301
This is an assorted set of stragglers into the merge window with driver
 updates for qla2xxx, megaraid_sas, storvsc and ufs.  It also includes pulls of
 the uapi tree (all the remaining SCSI pieces) and the fcoe tree (updates to
 fcoe and libfc)
 
 Signed-off-by: James Bottomley <JBottomley@Parallels.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iQEcBAABAgAGBQJRMHJHAAoJEDeqqVYsXL0M9tAH/2YG3TCfy0RFAejGgLfX9OGH
 6eFe71m7Z8nfIEneAnm5BuKjCx3QFRp5UFjJZdFHLP1Qv0TbpKs4FnZyeSGTxLQp
 S1fZc5sTWmsb5qYxLaukKopC6sFx+hNI2dvB+rgKcd+nWy1RzG7lGqbS4CRNE76q
 UNByqlfqJxn5cfQw7dg2zOUKlGaGL2jSyFf0QFXR2IZzO33PeyBPfKDFeJC6b+oc
 XTy9MK9V5u6ne3XimDTU2hP4lPAsZaJtcqsv1Gvv2y+BHalQiPqfL6bZMvN3Zbfq
 hfT+i2xnYy85858gxtyIhzHwU14zF7I0HEWiVpddsF9NDK7iNKvK8aWHaTs7qis=
 =hvGQ
 -----END PGP SIGNATURE-----

Merge tag 'scsi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI updates from James Bottomley:
 "This is an assorted set of stragglers into the merge window with
  driver updates for qla2xxx, megaraid_sas, storvsc and ufs.

  It also includes pulls of the uapi tree (all the remaining SCSI
  pieces) and the fcoe tree (updates to fcoe and libfc)"

* tag 'scsi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (81 commits)
  [SCSI] ufs: Separate PCI code into glue driver
  [SCSI] ufs: Segregate PCI Specific Code
  [SCSI] scsi: fix lpfc build when wmb() is defined as mb()
  [SCSI] storvsc: Handle dynamic resizing of the device
  [SCSI] storvsc: Restructure error handling code on command completion
  [SCSI] storvsc: avoid usage of WRITE_SAME
  [SCSI] aacraid: suppress two GCC warnings
  [SCSI] hpsa: check for dma_mapping_error in hpsa_passthru ioctls
  [SCSI] hpsa: reorganize error handling in hpsa_passthru_ioctl
  [SCSI] hpsa: check for dma_mapping_error in hpsa_map_sg_chain_block
  [SCSI] hpsa: Check for dma_mapping_error for all code paths using fill_cmd
  [SCSI] hpsa: Check for dma_mapping_error in hpsa_map_one
  [SCSI] dc395x: uninitialized variable in device_alloc()
  [SCSI] Fix range check in scsi_host_dif_capable()
  [SCSI] storvsc: Initialize the sglist
  [SCSI] mpt2sas: Add support for OEM specific controller
  [SCSI] ipr: Fix oops while resetting an ipr adapter
  [SCSI] fnic: Fnic Trace Utility
  [SCSI] fnic: New debug flags and debug log messages
  [SCSI] fnic: fnic driver may hit BUG_ON on device reset
  ...
2013-03-02 11:42:16 -08:00
James Bottomley
3e34c1fc2b FCoE Updates for 3.9
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJRI992AAoJEEajxTw9cn4HCAcQAI0yWjsDYkTZUAN3vcU7Xh83
 e1Qt1dAWjY+sFspo54p4ndK7gkBQzBlzIPf1MdcTQOSBWSA2QYnvukpZuRm99OjH
 /60xky0TgGtvGUbNgCRG9zhrPQ+/rTvuenZrZa9ibWeIMM8RgyWBV76REDyetd3b
 K6q2Cz75MKDZwgwJpp7FPF7SJYQVgVbhbVJFIvN5rtS2xEUZI7Ltj/stW0QoJfkD
 R1XAlGCJETV+pzG0VY7aycxCGhN3HM7QYiA1EiKCfBkLzfFosf+oozWTgIkLm1PE
 UKO8b6RNR0d7BHXBkIgP0C18Wx9BrLWS5woNoiDANBK3FTJIgL/D32tiJJXhLFGP
 zzY4OXDT0OEUsn1oc8ldI5/LqALdvDJGzUBbiA1wTiXsJyHVAsBajJc3pP9btnom
 Z91xB4nRLQx/doJqaKOZiQJRCSeG7b/lQM06jOEHFAO7Ah9sRSqbelHd1+tmSV6J
 NfDhkZsi5rPZ9My23J5Nkcfy4Vi8hpyqNC0KZR7PTUYJwi1LrTKRSTkek53b5K3O
 Ee7ZtQ1cY3v90QuG2bNieWaLUKINX/nTKF5DIKH1l9dfxmcpHystPpjRZ06D5wUY
 vsH+9wNAq0v6+tAT8yvoc5qrZb2OEO/xkgCNIN8c5pNGiw0hjeXzhg5bZBGjNmGK
 ixtSPIR5QoaU1XFq62JH
 =r8PC
 -----END PGP SIGNATURE-----

[SCSI] Merge tag 'fcoe-02-19-13' into for-linus

FCoE Updates for 3.9

Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-03-01 09:10:08 +00:00
Linus Torvalds
21f3b24da9 SCSI misc on 20130222
he patch set is mostly driver updates (bnx2fc, ipr, lpfc, qla4) and a few bug
 fixes.
 
 Signed-off-by: James Bottomley <JBottomley@Parallels.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iQEcBAABAgAGBQJRJ0oJAAoJEDeqqVYsXL0MVVoH/A8xFiLkdCXaFkhYMlGRrDox
 wgK/RwWekDOtVS2poPhDGKRfXaUn4uA3iOJig8HC5lD8NS65DElCpCWM+/DhitXt
 Ky4ukgXSQ09IQtWraGqr//MC/YqM8iimWnGgXSouLPJ7a3AqYVIYCg9CEkGJX/mD
 i09aE8uUyNd3Wp68anQ2w0RCH/7/InLL348WFmQ1eWxYyFJnLYGRkASbkuHxPjgU
 H4QmINFlI4kBMWdHkVinh0w7cjcmUOAU+KyAZ75aelQ6dZ2aJioKn3BS7D6gF9jv
 jJpJMIj8LzpAnfR3Z5ijkkcVG7E0ht+Dtr6kmAPZQJnkc/GdQvvgEg+F9aIpxoU=
 =oDz4
 -----END PGP SIGNATURE-----

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull first round of SCSI updates from James Bottomley:
 "The patch set is mostly driver updates (bnx2fc, ipr, lpfc, qla4) and a
  few bug fixes"

Pull delayed because google hates James, and sneakily considers his pull
requests spam. Why, google, why?

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (60 commits)
  [SCSI] aacraid: 1024 max outstanding command support for Series 7 and above
  [SCSI] bnx2fc: adjust duplicate test
  [SCSI] qla4xxx: Update driver version to 5.03.00-k4
  [SCSI] qla4xxx: Fix return code for qla4xxx_session_get_param.
  [SCSI] qla4xxx: wait for boot target login response during probe.
  [SCSI] qla4xxx: Added support for force firmware dump
  [SCSI] qla4xxx: Re-register IRQ handler while retrying initialize of adapter
  [SCSI] qla4xxx: Throttle active IOCBs to firmware limits
  [SCSI] qla4xxx: Remove unnecessary code from qla4xxx_init_local_data
  [SCSI] qla4xxx: Quiesce driver activities while loopback
  [SCSI] qla4xxx: Rename MBOX_ASTS_IDC_NOTIFY to MBOX_ASTS_IDC_REQUEST_NOTIFICATION
  [SCSI] qla4xxx: Add spurious interrupt messages under debug level 2
  [SCSI] cxgb4i: Remove the scsi host device when removing device
  [SCSI] bfa: fix strncpy() limiter in bfad_start_ops()
  [SCSI] qla4xxx: Update driver version to 5.03.00-k3
  [SCSI] qla4xxx: Correct the validation to check in get_sys_info mailbox
  [SCSI] qla4xxx: Pass correct function param to qla4_8xxx_rd_direct
  [SCSI] lpfc 8.3.37: Update lpfc version for 8.3.37 driver release
  [SCSI] lpfc 8.3.37: Fixed infinite loop in lpfc_sli4_fcf_rr_next_index_get.
  [SCSI] lpfc 8.3.37: Fixed crash due to SLI Port invalid resource count
  ...
2013-02-28 12:43:43 -08:00
Tejun Heo
ab51603672 scsi/lpfc: convert to idr_alloc()
Convert to the much saner new idr interface.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: James Smart <james.smart@emulex.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-27 19:10:19 -08:00
Tejun Heo
b98c52b572 scsi: convert to idr_alloc()
Convert to the much saner new idr interface.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-27 19:10:18 -08:00
Tejun Heo
70a9755d5f scsi/bfa: convert to idr_alloc()
Convert to the much saner new idr interface.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Krishna C Gudipati <kgudipat@brocade.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-27 19:10:18 -08:00
Linus Torvalds
d895cb1af1 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs pile (part one) from Al Viro:
 "Assorted stuff - cleaning namei.c up a bit, fixing ->d_name/->d_parent
  locking violations, etc.

  The most visible changes here are death of FS_REVAL_DOT (replaced with
  "has ->d_weak_revalidate()") and a new helper getting from struct file
  to inode.  Some bits of preparation to xattr method interface changes.

  Misc patches by various people sent this cycle *and* ocfs2 fixes from
  several cycles ago that should've been upstream right then.

  PS: the next vfs pile will be xattr stuff."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (46 commits)
  saner proc_get_inode() calling conventions
  proc: avoid extra pde_put() in proc_fill_super()
  fs: change return values from -EACCES to -EPERM
  fs/exec.c: make bprm_mm_init() static
  ocfs2/dlm: use GFP_ATOMIC inside a spin_lock
  ocfs2: fix possible use-after-free with AIO
  ocfs2: Fix oops in ocfs2_fast_symlink_readpage() code path
  get_empty_filp()/alloc_file() leave both ->f_pos and ->f_version zero
  target: writev() on single-element vector is pointless
  export kernel_write(), convert open-coded instances
  fs: encode_fh: return FILEID_INVALID if invalid fid_type
  kill f_vfsmnt
  vfs: kill FS_REVAL_DOT by adding a d_weak_revalidate dentry op
  nfsd: handle vfs_getattr errors in acl protocol
  switch vfs_getattr() to struct path
  default SET_PERSONALITY() in linux/elf.h
  ceph: prepopulate inodes only when request is aborted
  d_hash_and_lookup(): export, switch open-coded instances
  9p: switch v9fs_set_create_acl() to inode+fid, do it before d_instantiate()
  9p: split dropping the acls from v9fs_set_create_acl()
  ...
2013-02-26 20:16:07 -08:00
Vinayak Holikatti
e0eca63e34 [SCSI] ufs: Separate PCI code into glue driver
This patch separates PCI code from ufshcd.c and makes it as a
core driver module and adds a new file ufshcd-pci.c as PCI glue
driver.

[jejb: strip __devinit and devexit_p()]
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Namjae Jeon <linkinjeon@gmail.com>
Reviewed-by: Subhash Jadavani <subhashj@codeaurora.org>
Tested-by: Maya Erez <merez@codeaurora.org>
Signed-off-by: Vinayak Holikatti <vinholikatti@gmail.com>
Signed-off-by: Santosh Yaraganavi <santoshsy@gmail.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-02-25 16:56:32 +00:00
Vinayak Holikatti
3b1d05807a [SCSI] ufs: Segregate PCI Specific Code
This patch segregates the PCI specific code in ufshcd.c to make it
ready for splitting into core ufs driver and PCI glue driver. Also
copyright header modification to remove extra warranty disclaim.

Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Namjae Jeon <linkinjeon@gmail.com>
Reviewed-by: Subhash Jadavani <subhashj@codeaurora.org>
Tested-by: Maya Erez <merez@codeaurora.org>
Signed-off-by: Vinayak Holikatti <vinholikatti@gmail.com>
Signed-off-by: Santosh Yaraganavi <santoshsy@gmail.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-02-25 16:41:14 +00:00
Linus Torvalds
d9978ec568 1) apply, and then revert, the sysfs export of ATA host controller number.
Discussion was continuing after patch application, trying to figure out how
    to best mesh exported data with the installers, boot-time agents and other
    parties that want this info.
 
 2) Merge Zero-Power Optical Device Driver (ZPODD) support, bringing
    the wonderfulness of sane power management to your CD/DVD device.
 
    Includes one SCSI-subsystem patch (with appropriate ACKs),
    adding runtime PM support to 'sr' driver.  That is the ZPODD interaction
    bits.
 
    Patchset went through some 13 revisions before it got here; kudos to
    Intel for persistence.
 
 3) pata_samsung_cf: use devm_clk_get()
 
 4) more ata_piix, ahci PCI IDs
 
 5) Add SATA driver for R-Car SoC
 
 6) Convert libata to use devm_ioremap_resource (Note: I think
    Greg sent this to you, also)
 
 7) Set proper Sense Key (SK) in the SCSI simulator when
    ATA passthrough indicates check condition.  Google and specification
    hawks everywhere shall rejoice.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.13 (GNU/Linux)
 
 iQIVAwUAUSfuQiWzCDIBeCsvAQKiQRAA2CEy9jPvsVlBgeU9sFao94Lw1BmS9Ros
 lHFtAVclA2aSn6IEdDei+z7t2i1fhn4+2jtlI04+azlrA1m/+hsOVc0/xOHW5xNd
 cDtFWIQOtd43iG4fg/WNS8pG9jckwo0dM/Fu9qF4bQIN+7ApQ8ARkexWgV/Ff+c7
 gl0agOb6+kBmFFgIDBtJ720M1r0WkDgfjczlNUwn6izHt6Dmml1EsVKuNSl26ODb
 7xGKj4zcsHgaLJq69p862hSdZoTvsYpyEHFPDoQCEHFgLpdjqHjbLn+AlOZX9gXu
 CUIsiu9+Kn+exomlfXGaRnl9Or+u7RBHAe5tQK1XqGpwtj4YiCoaE82pvRzICGRC
 br71FC6jPP7dxkJK+//c4H3i+FXr2m7zKvRYlwfotLCLaoIv2PW+sNiclaDoL0ID
 rFdwjr7VPW+8MUwH/rklD8Xcfx4Zqk+SpiJP5mYbCXPRvItpE7kl7qBBgD9mF11e
 gqcv3c0h2DR+WN4vizaCksxGryknICuIE4jrXqEHMqhX1BVpaiIzvUbOfuh55ZSd
 J8B1VvywTf7mhbiEa9+8WTihi1j65+WUn2oDXnkxzSMYRMqoxHgmQa9n1UNvKULH
 e8fauFJkKzqjytong29Kc9ALsyjEaBtxg/RUV6AfpQazHuMu/wLhOQCHKPG8AuEv
 PXAklRZAvsA=
 =YvYo
 -----END PGP SIGNATURE-----

Merge tag 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev

Pull libata updates from Jeff Garzik:

1) apply, and then revert, the sysfs export of ATA host controller
   number.  Discussion was continuing after patch application, trying to
   figure out how to best mesh exported data with the installers,
   boot-time agents and other parties that want this info.

2) Merge Zero-Power Optical Device Driver (ZPODD) support, bringing the
   wonderfulness of sane power management to your CD/DVD device.

   Includes one SCSI-subsystem patch (with appropriate ACKs), adding
   runtime PM support to 'sr' driver.  That is the ZPODD interaction
   bits.

   Patchset went through some 13 revisions before it got here; kudos to
   Intel for persistence.

3) pata_samsung_cf: use devm_clk_get()

4) more ata_piix, ahci PCI IDs

5) Add SATA driver for R-Car SoC

6) Convert libata to use devm_ioremap_resource (Note: I think Greg sent
   this to you, also)

7) Set proper Sense Key (SK) in the SCSI simulator when ATA passthrough
   indicates check condition.  Google and specification hawks everywhere
   shall rejoice.

* tag 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: (22 commits)
  [libata] fix smatch warning for zpodd_wake_dev
  [libata] Set proper SK when CK_COND is set.
  [libata] Convert to devm_ioremap_resource()
  libata: add R-Car SATA driver
  ahci: Add Device IDs for Intel Wellsburg PCH
  ata_piix: Add Device IDs for Intel Wellsburg PCH
  [SCSI] remove can_power_off flag from scsi_device
  [libata] scsi: no poll when ODD is powered off
  [SCSI] sr: support runtime pm
  ahci: AHCI-mode SATA patch for Intel Avoton DeviceIDs
  ata_piix: IDE-mode SATA patch for Intel Avoton DeviceIDs
  [libata] PM code cleanup for ata port
  [libata] pm: differentiate system and runtime pm for ata port
  Revert "libata: export host controller number thru /sys"
  libata: do not suspend port if normal ODD is attached
  libata: expose pm qos flags for ata device
  libata: handle power transition of ODD
  libata: check zero power ready status for ZPODD
  libata: move acpi notification code to zpodd
  libata: identify and init ZPODD devices
  ...
2013-02-24 17:32:15 -08:00
Randy Dunlap
bf07bdea0d [SCSI] scsi: fix lpfc build when wmb() is defined as mb()
On architectures where wmb() is defined as mb(), a build error
happens since there is also a variable named 'mb' in lpfc_sli.c's
lpfc_sli_issue_mbox_s3() function.  Rename the variable to 'mbx'
to prevent the build error.

drivers/scsi/lpfc/lpfc_sli.c: error: called object 'mb' is not a function

Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: James Smart <james.smart@emulex.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-02-24 09:43:11 +00:00
K. Y. Srinivasan
6781209e76 [SCSI] storvsc: Handle dynamic resizing of the device
Handle LUN size changes by re-scanning the device.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-02-24 09:41:23 +00:00
K. Y. Srinivasan
c50bd44817 [SCSI] storvsc: Restructure error handling code on command completion
In preparation for handling additional sense codes, restructure and cleanup
the error handling code in the command completion code path.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-02-24 09:40:32 +00:00
Olaf Hering
3e8f4f4065 [SCSI] storvsc: avoid usage of WRITE_SAME
Set scsi_device->no_write_same because the host does not support it.
Also blacklist WRITE_SAME to avoid (and log) accident usage.

If the guest uses the ext4 filesystem, storvsc hangs while it prints
these messages in an endless loop:
...
[  161.459523] hv_storvsc vmbus_0_1: cmd 0x41 scsi status 0x2 srb status 0x6
[  161.462157] sd 2:0:0:0: [sda]
[  161.463135] Sense Key : No Sense [current]
[  161.464983] sd 2:0:0:0: [sda]
[  161.465899] Add. Sense: No additional sense information
[  161.468211] hv_storvsc vmbus_0_1: cmd 0x41 scsi status 0x2 srb status 0x6
[  161.475766] sd 2:0:0:0: [sda]
[  161.476728] Sense Key : No Sense [current]
[  161.478284] sd 2:0:0:0: [sda]
[  161.479441] Add. Sense: No additional sense information
...

This happens with a guest running on Windows Server 2012, but happens to
work while running on Windows Server 2008. WRITE_SAME isnt really
supported by both versions, so disable the command usage globally.

Signed-off-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-02-24 09:39:44 +00:00
Paul Bolle
98f99a8ac8 [SCSI] aacraid: suppress two GCC warnings
Building src.o for a 32 bit system triggers two GCC warnings:
    drivers/scsi/aacraid/src.c: In function ‘aac_src_deliver_message’:
    drivers/scsi/aacraid/src.c:410:3: warning: right shift count >= width of type [enabled by default]
    drivers/scsi/aacraid/src.c:434:2: warning: right shift count >= width of type [enabled by default]

These warnings are caused by a right shift of 32. Use upper_32_bits() to
suppress them.

Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Cc: Mahesh Rajashekhara <Mahesh_Rajashekhara@pmc-sierra.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-02-24 09:38:10 +00:00
Stephen M. Cameron
bcc48ffa4b [SCSI] hpsa: check for dma_mapping_error in hpsa_passthru ioctls
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-02-24 09:36:58 +00:00
Stephen M. Cameron
c1f63c8fe8 [SCSI] hpsa: reorganize error handling in hpsa_passthru_ioctl
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-02-24 09:36:08 +00:00
Stephen M. Cameron
e2bea6df32 [SCSI] hpsa: check for dma_mapping_error in hpsa_map_sg_chain_block
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-02-24 09:35:18 +00:00
Stephen M. Cameron
a2dac136c4 [SCSI] hpsa: Check for dma_mapping_error for all code paths using fill_cmd
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-02-24 09:34:21 +00:00
Shuah Khan
eceaae187d [SCSI] hpsa: Check for dma_mapping_error in hpsa_map_one
Signed-off-by: Shuah Khan <shuah.khan@hp.com>
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-02-24 09:33:27 +00:00
Dan Carpenter
208afec4f3 [SCSI] dc395x: uninitialized variable in device_alloc()
This bug was introduced back in bitkeeper days in 2003.  We use
"dcb->dev_mode" before it has been initialized.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Oliver Neukum <oliver@neukum.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-02-24 09:29:34 +00:00
K. Y. Srinivasan
9d2696e658 [SCSI] storvsc: Initialize the sglist
Properly initialize scatterlist before using it.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Cc: stable@vger.kernel.org
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-02-24 09:24:26 +00:00
Sreekanth Reddy
7887ea7f94 [SCSI] mpt2sas: Add support for OEM specific controller
Defined SSDID & HW vendor brand strings. Added entries for SSDID within the
function that prints the brand string.

Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@lsi.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-02-24 08:48:15 +00:00
Brian King
bfae7820b8 [SCSI] ipr: Fix oops while resetting an ipr adapter
When resetting an ipr adapter, we use scsi_block_requests to
block any new commands from scsi core, and then unblock after
the reset. When hotplug removing an adapter, we shut it down
and go through this same code, but we've seen issues with
scsi_unblock_requests running after the adapter's memory has
been freed. There is really no need to block/unblock when
the adapter is being removed, so this patch skips the
block/unblock and will immediately fail any commands that
happen to make it to queuecommand while the adapter is
being shutdown.

Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Wen Xiong <wenxiong@linux.vnet.ibm.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-02-24 08:24:48 +00:00
Al Viro
496ad9aa8e new helper: file_inode(file)
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-02-22 23:31:31 -05:00
Hiral Patel
4d7007b49d [SCSI] fnic: Fnic Trace Utility
Fnic Trace utility is a tracing functionality built directly into fnic driver
to trace events. The benefit that trace buffer brings to fnic driver is the
ability to see what it happening inside the fnic driver. It also provides the
capability to trace every IO event inside fnic driver to debug panics, hangs
and potentially IO corruption issues. This feature makes it easy to find
problems in fnic driver and it also helps in tracking down strange bugs in a
more manageable way. Trace buffer is shared across all fnic instances for
this implementation.

Signed-off-by: Hiral Patel <hiralpat@cisco.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-02-22 17:32:07 +00:00
Hiral Patel
14eb5d905d [SCSI] fnic: New debug flags and debug log messages
Added new fnic debug flags for identifying IO state at every stage of IO while
debugging and also added more log messages for better debugging capability.

Signed-off-by: Sesidhar Baddela <sebaddel@cisco.com>
Signed-off-by: Hiral Patel <hiralpat@cisco.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-02-22 17:31:09 +00:00
Hiral Patel
a0bf1ca27b [SCSI] fnic: fnic driver may hit BUG_ON on device reset
The issue was observed when LUN Reset is issued through IOCTL or sg_reset
utility.

fnic driver issues LUN RESET to firmware. On successful completion of device
reset, driver cleans up all the pending IOs that were issued prior to device
reset. These pending IOs are expected to be in ABTS_PENDING state. This works
fine, when the device reset operation resulted from midlayer, but not when
device reset was triggered from IOCTL path as the pending IOs were not in
ABTS_PENDING state. execution path hits panic if the pending IO is not in
ABTS_PENDING state.

Changes:
The fix replaces BUG_ON check in fnic_clean_pending_aborts() with marking
pending IOs as ABTS_PENDING if they were not in ABTS_PENDING state and skips
if they were already in ABTS_PENDING state. An extra check is added to validate
the abort status of the commands after a delay of 2 * E_D_TOV using a
helper function. The helper function returns 1 if it finds any pending IO in
ABTS_PENDING state, belong to the LUN on which device reset was issued else 0.
With this, device reset operation returns success only if the helper funciton
returns 0, otherwise it returns failure.

Other changes:
- Removed code in fnic_clean_pending_aborts() that returns failure if it finds
  io_req NULL, instead of returning failure added code to continue with next io
- Added device reset flags for debugging in fnic_terminate_rport_io,
  fnic_rport_exch_reset, and fnic_clean_pending_aborts

Signed-off-by: Narsimhulu Musini <nmusini@cisco.com>
Signed-off-by: Hiral Patel <hiralpat@cisco.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-02-22 17:30:19 +00:00
Hiral Patel
cfe16d5da8 [SCSI] fnic: Fix SGEs limit
Driver allows IOs with more SGEs than max SGEs supported by Palo. The current
max SGEs supported by the fnic driver is 1024. The current register settings
on Palo supports a max of 256 only. Palo would return any IO with more than
256 SGEs with an error indicating INVALID_SGLS. Fnic driver should limit the
max supported SGLs in the driver to 256 to avoid this error.

Signed-off-by: Sesidhar Baddela <sebaddel@cisco.com>
Signed-off-by: Hiral Patel <hiralpat@cisco.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-02-22 17:29:35 +00:00
Hiral Patel
03298552cb [SCSI] fnic: fixing issues in device and firmware reset code
1. Handling overlapped firmware resets
     This fix serialize multiple firmware resets to avoid situation where fnic
     device fails to come up for link up event, when firmware resets are issued
     back to back. If there are overlapped firmware resets are issued,
     the firmware reset operation checks whether there is any firmware reset in
     progress, if so it polls for its completion in a loop with 100ms delay.

2. Handling device reset timeout
     fnic_device_reset code has been modified to handle Device reset timeout:
     - Issue terminate on device reset timeout.
     - Introduced flags field (one of the scratch fields in scsi_cmnd).
     With this, device reset request would have DEVICE_RESET flag set for other
     routines to determine the type of the request.
     Also modified fnic_terminate_rport_io, fnic_rport_exch_rset, completion
     routines to handle SCSI commands with DEVICE_RESET flag.

3. LUN/Device Reset hangs when issued through IOCTL using utilities like
   sg_reset.
     Each SCSI command is associated with a valid tag, fnic uses this tag to
     retrieve associated scsi command on completion. the LUN/Device Reset issued
     through IOCTL resulting into a SCSI command that is not associated with a
     valid tag. So fnic fails to retrieve associated scsi command on completion,
     which causes hang. This fix allocates tag, associates it with the
     scsi command and frees the tag, when the operation completed.

4. Preventing IOs during firmware reset.
     Current fnic implementation allows IO submissions during firmware reset.
     This fix synchronizes IO submissions and firmware reset operations.
     It ensures that IOs issued to fnic prior to reset will be issued to the
     firmware before firmware reset.

Signed-off-by: Narsimhulu Musini <nmusini@cisco.com>
Signed-off-by: Hiral Patel <hiralpat@cisco.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-02-22 17:28:19 +00:00
Sakthivel K
bfb4809f7f [SCSI] pm80xx: fix for memory region free
All memory regions are allocated based on variables total_len
and alignment but free was based on element_size.

Signed-off-by: Sakthivel K <DL.Team.PMC.SPC.Linux.open.source@pmcs.com>
Signed-off-by: Anand Kumar S <DL.Team.PMC.SPC.Linux.open.source@pmcs.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-02-22 15:44:40 +00:00
adam radford
5eca4a67b8 [SCSI] megaraid_sas: Version and Changelog update
This patch updates the megaraid_sas driver version and updates
Documentation/scsi/ChangeLog.megaraid_sas.

Signed-off-by: Adam Radford <aradford@gmail.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-02-22 15:37:15 +00:00
adam radford
9c5ebd09e5 [SCSI] megaraid_sas: Dont load DevHandle unless FastPath enabled
The following patch for megaraid_sas will fix an issue where the
driver should not be loading the DevHandle unless FastPath is enabled.
 If FastPath was not enabled, this means the hardware raid map
validation failed for some reason, or the map was corrupted, which
could mean the DevHandle could be invalid.

Signed-off-by: Adam Radford <aradford@gmail.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-02-22 15:31:41 +00:00
adam radford
046c9ec259 [SCSI] megaraid_sas: Add 4k FastPath DIF support
The following patch for megaraid_sas will allow Fastpath T10PI/DIF
frame builds to work with 4k sector size.

Signed-off-by: Adam Radford <aradford@gmail.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-02-22 15:25:18 +00:00
Chad Dupuis
f356bef134 [SCSI] qla2xxx: Wait for IDC complete event to finish loopback operation.
Wait for the IDC complete AEN before returning the loopback operation back to
the application to make sure the port is put back into normal operations.

Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com>
Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-02-22 15:06:24 +00:00
Joe Carnuccio
fe52f6e121 [SCSI] qla2xxx: Integrate generic card temperature with mezz card temperature.
Give priority to I2C thermal.

Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com>
Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-02-22 14:39:27 +00:00
Saurav Kashyap
6c3943cdb8 [SCSI] qla2xxx: Don't process state change aen for reset owner.
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-02-22 14:37:32 +00:00
Chad Dupuis
bb4cf5b73b [SCSI] qla2xxx: Don't process RSCNs for a vport on the same physical adapter.
Currently,the driver is processes RSCNs for each new NPIV ports that is created.
Processing the RSCN includes a name server query to see what has changed at the
name server side.  The name server query is performed by the physical port and
each virtual port on the physical adapter (since the RSCN is passed to each
virtual port for processing).  As the number of virtual ports being created
increases, this causes a lot of traffic and busies the firmware.

Processing the RSCN for a virtual port we already have a priori knowledge of is
not necessary so check the 24-bit fabric ID of the RSCN entry and skip
processing it if the RSCN is for a virtual port we already know about.

Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com>
Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-02-22 14:31:24 +00:00
Joe Carnuccio
3a11711ad0 [SCSI] qla2xxx: Add setting of driver version string for vendor application.
Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com>
Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-02-22 14:28:10 +00:00
Joe Carnuccio
90687a1e15 [SCSI] qla2xxx: Correction of comment in MBC opcode defines.
Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com>
Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-02-22 14:21:18 +00:00
Andrew Vasquez
4ac8d4ca5d [SCSI] qla2xxx: Correct list-iteration bug in Report-ID Acquisition codes.
Code in qla24xx_report_id_acquisition() incorrectly assumed that
upon completion of list iteration (with no match), the 'pos'
(vp) variable passed to list_for_each_entry() would be set to
NULL.  In this context, if the firmware were to return an
unrecognized vp_idx, the follow-on assignments to vp-members
could result in corruption of the structure.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-02-22 14:11:46 +00:00
Joe Carnuccio
827210ba2a [SCSI] Revert "[SCSI] qla2xxx: Optimize existing port name server query matching."
This reverts commit c0822b63cc.

Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com>
Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-02-22 14:04:01 +00:00
Joe Carnuccio
e452ceb636 [SCSI] Revert "[SCSI] qla2xxx: Avoid losing any fc ports when loop id's are exhausted."
This reverts commit 4dc77c36f8.

Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com>
Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-02-22 12:55:45 +00:00
Paul Bolle
f24b697ba4 [SCSI] qla2xxx: silence two GCC warnings.
Compiling qla_gs.o (part of the qla2xxx module) triggers two GCC
warnings:
    drivers/scsi/qla2xxx/qla_gs.c: In function ‘qla2x00_fdmi_rhba’:
    drivers/scsi/qla2xxx/qla_gs.c:1339:7: warning: array subscript is above array bounds [-Warray-bounds]
    drivers/scsi/qla2xxx/qla_gs.c: In function ‘qla2x00_fdmi_register’:
    drivers/scsi/qla2xxx/qla_gs.c:1663:15: warning: array subscript is above array bounds [-Warray-bounds]

It seems that the sequence of a strcpy followed by a strlen confuses GCC
when it is keeping track of array bounds here. (It is not clear to me
which array triggers this warning and by how much GCC thinks the
subscript is above its bounds. Neither is it clear to me why comparable
code in these two functions doesn't trigger this warning.)

An easy way to silence these warnings is to use preprocessor macros and
strncpy, as that apparently gives GCC enough information to keep track
of array bounds.

Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-02-22 12:53:31 +00:00