After discussing w/ Thomas over IRC, it seems the issue is the sched tick
fires on every cpu at the same time, causing extra lock contention.
This smaller change, adds an extra offset per cpu so the ticks don't line up.
This patch also drops the idle latency from 40us down to under 20us.
Signed-off-by: john stultz <johnstul@us.ibm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When a device is replaced by a better rated device, then the broadcast
mode needs to be evaluated again. When the new device has no requirement
for broadcasting, then the broadcast bits for the CPU must be cleared.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: john stultz <johnstul@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We need to make sure, that the clockevent devices are resumed, before
the tick is resumed. The current resume logic does not guarantee this.
Add CLOCK_EVT_MODE_RESUME and call the set mode functions of the clock
event devices before resuming the tick / oneshot functionality.
Fixup the existing users.
Thanks to Nigel Cunningham for tracking down a long standing thinko,
which affected the jinxed VAIO.
[akpm@linux-foundation.org: xen build fix]
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix following section mismatch warning:
WARNING: vmlinux.o(.text+0x121e62): Section mismatch: reference to .init.text:__alloc_bootmem (between 'vgacon_startup' and 'vgacon_scrolldelta')
Browsing the code it seems that vgacon_scrollback_startup() is only called
during the init phase so the reference to the .init.text section is OK.
Teach modpost not to warn using ___init_refok.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
For display purposes, treat uid's and gid's as unsigned ints for now.
Also fix a typo.
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
Cc: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Flush workqueue before releasing bioset and mopools in dm-crypt. There can
be finished but not yet released request.
Call chain causing oops:
run workqueue
dec_pending
bio_endio(...);
<remove device request - remove mempool>
mempool_free(io, cc->io_pool);
This usually happens when cryptsetup create temporary
luks mapping in the beggining of crypt device activation.
When dm-core calls destructor crypt_dtr, no new request
are possible.
Signed-off-by: Milan Broz <mbroz@redhat.com>
Cc: Chuck Ebbert <cebbert@redhat.com>
Cc: Patrick McHardy <kaber@trash.net>
Acked-by: Alasdair G Kergon <agk@redhat.com>
Cc: Christophe Saout <christophe@saout.de>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is an variation on the patch sent by Christoph Hellwig which kills
file_count abuse by the Coda kernel module by moving the coda_flush
functionality into coda_release. However part of reason we were using the
coda_flush callback was to allow Coda to pass errors that occur during
writeback from the userspace cache manager back to close().
As Al Viro explained on linux-fsdevel, it is impossible to guarantee that
such errors can in fact be returned back to the caller. There are many
cases where the last reference to a file is not released by the close
system call and it is also impossible to pick some close as a 'last-close'
and delay it until all other references have been destroyed.
The CODA_STORE/CODA_RELEASE upcall combination is clearly a broken design,
and it is better to remove it completely.
Signed-off-by: Jan Harkes <jaharkes@cs.cmu.edu>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@ftp.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Trying to survive an allmodconfig on a nommu platform results in many
screen lengths of module unhappiness. Many of the mmap related things that
binfmt_flat hooks in to are never exported despite being global, and there
are also missing definitions for vmalloc_32_user() and vm_insert_page().
I've implemented vmalloc_32_user() trying to stick as close to the
mm/vmalloc.c implementation as possible, though we don't have any need for
VM_USERMAP, so groveling for the VMA can be skipped. vm_insert_page() has
been stubbed for now in order to keep the build happy.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If the swiotlb maps a multi-slab region, swiotlb_sync_single_range() can be
invoked to sync a sub-region which does not include the first slab.
Unfortunately io_tlb_orig_addr[] is only initialised for the first slab,
and hence the call to sync_single() will read a garbage orig_addr in this
case.
This patch fixes the issue by initialising all mapped slabs in
io_tlb_orig_addr[]. It also correctly adjusts the buffer pointer in
sync_single() to handle the case that the given dma_addr is not aligned on
a slab boundary.
Signed-off-by: Keir Fraser <keir.fraser@cl.cam.ac.uk>
Cc: "Luck, Tony" <tony.luck@intel.com>
Acked-by: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch fixes up sources after conversion by Lindent.
Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Jan Kara <jack@ucw.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Too many semicolons in this macro.
Signed-off-by: Nick Piggin <npiggin@suse.de>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
__free_page() wants a struct page, not a virtual address.
Signed-off-by: Avi Kivity <avi@qumranet.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
CC net/ipv4/inetpeer.o
net/ipv4/inetpeer.c: In function 'unlink_from_pool':
net/ipv4/inetpeer.c:297: warning: the address of 'stack' will always evaluate as 'true'
net/ipv4/inetpeer.c:297: warning: the address of 'stack' will always evaluate as 'true'
net/ipv4/inetpeer.c: In function 'inet_getpeer':
net/ipv4/inetpeer.c:409: warning: the address of 'stack' will always evaluate as 'true'
net/ipv4/inetpeer.c:409: warning: the address of 'stack' will always evaluate as 'true'
"Fix" by checking for != NULL.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc:
sdhci: make sure to clear the error interrupt
mmc: at91_mci: wakeup on card insertion (or removal)
mmc: add maintainer for at91
* 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6:
[SPARC64]: fix section mismatch warning in mdesc.c
[SPARC64]: fix section mismatch warning in pci_sunv4
[SPARC64]: Stop using drivers/char/rtc.c
[SPARC64]: Convert parport to of_platform_driver.
[SPARC]: Implement fb_is_primary_device().
[SPARC64]: Fix virq decomposition.
[SPARC64]: Use KERN_ERR in IRQ manipulation error printks.
[SPARC64]: Do not flood log with failed DS messages.
[SPARC64]: Add proper multicast support to VNET driver.
[SPARC64]: Handle multiple domain-services-port nodes properly.
[SPARC64]: Improve VIO device naming further.
[SPARC]: Make sure dev_archdata is filled in for all devices.
[SPARC]: Define minimal struct dev_archdata, similarly to sparc64.
[SPARC]: Fix serial console device detection.
Fix following warning:
WARNING: vmlinux.o(.text+0x35264): Section mismatch: reference to .init.text:__alloc_bootmem (between 'mdesc_bootmem_alloc' and 'mdesc_bootmem_free')
Rename mdesc_mem_ops to *_ops so modpost ignores __init references
and declare mdesc_bootmem_alloc __init since it is only used
during __init context.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix following warning:
WARNING: vmlinux.o(.text+0x3cf50): Section mismatch: reference to .init.text:page_in_phys_avail (between 'pci_sun4v_pbm_init' and 'sun4v_pci_init')
pci_sun4v_pbm_init and sun4v_pci_init was only used under __init
context so declare them _init.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The existing sparc64 mini_rtc driver can handle CMOS based
rtcs trivially with just a few lines of code and the simplifies
things tremendously.
Tested on SB1500.
Signed-off-by: David S. Miller <davem@davemloft.net>
The dev_handle and dev_ino fields don't match up exactly to
the traditional IMAP_IGN and IMAP_INO masks.
So store them away in a table and look them up directly.
Signed-off-by: David S. Miller <davem@davemloft.net>
When booting up a control node it's quite common to
not be able to register several service types.
And likewise on guests at least one or two are going
to not be there.
Signed-off-by: David S. Miller <davem@davemloft.net>
The best scheme to get uniqueness seems to be:
FOO -- If node lacks "id" property
FOO-$(ID) -- If node has "id" but parent lacks "cfg-handle"
FOO-$(ID)-$(CFG_HANDLE) -- If node has both
Signed-off-by: David S. Miller <davem@davemloft.net>
The current scheme works on static interpretation of text names, which
is wrong.
The output-device setting, for example, must be resolved via an alias
or similar to a full path name to the console device.
Paths also contain an optional set of 'options', which starts with a
colon at the end of the path. The option area is used to specify
which of two serial ports ('a' or 'b') the path refers to when a
device node drives multiple ports. 'a' is assumed if the option
specification is missing.
This was caught by the UltraSPARC-T1 simulator. The 'output-device'
property was set to 'ttya' and we didn't pick upon the fact that this
is an OBP alias set to '/virtual-devices/console'. Instead we saw it
as the first serial console device, instead of the hypervisor console.
The infrastructure is now there to take advantage of this to resolve
the console correctly even in multi-head situations in fbcon too.
Thanks to Greg Onufer for the bug report.
Signed-off-by: David S. Miller <davem@davemloft.net>
* 'master' of ssh://master.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvb:
V4L/DVB (5880): wm8775/wm8739: Fix memory leak when unloading module
V4L/DVB (5877): radio-gemtek-pci: remove unused structure member
V4L/DVB (5871): Conexant 2388x: check for kthread_run
V4L/DVB (5869): Add check for valid control ID to v4l2_ctrl_next.
V4L/DVB (5867): videodev2.h: add missing <sys/time.h> for userspace
V4L/DVB (5866): ivtv: fix DMA timeout when capturing VBI + another stream
V4L/DVB (5865): Remove usage of HZ on ivtv driver, replacing by msecs_to_jiffies
V4L/DVB (5861): Use msecs_to_jiffies instead of HZ on bttv, cx88 and saa7134
V4L/DVB (5860): Use msecs_to_jiffies instead of HZ on some webcam drivers
V4L/DVB (5859): use msecs_to_jiffies on InfraRed RC5 timeout
V4L/DVB (5858): Use msecs_to_jiffies instead of HZ on media/video I2C drivers
V4L/DVB (5857): Use msecs_to_jiffies instead of HZ on radio drivers
V4L/DVB (5855): ivtv: fix Kconfig typo and refer to the driver homepage.
V4L/DVB (5854): ivtv: cleanup of driver messages
V4L/DVB (5853): ivtv: add support to suppress high volume i2c debug messages.
V4L/DVB (5852): ivtv: don't recompile needlessly
V4L/DVB (5851): ivtv: fix missing I2C_ALGOBIT config option
V4L/DVB (5850): ivtv: improve API command debugging
V4L/DVB (5848): Av7110: fix typo
We ignore all the generated files called "vmlinux*" from the top-level
gitignore, but that also ends up catching a few files that we track, and
that people do edit. Notably the "vmlinux.lds.S" file, that each
architecture has.
You can always use "git add -f" to override the ignore file, but we
might as well just make it explicit for this file.
Bitten-by-and-tested-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 'for-2.6.23' of master.kernel.org:/pub/scm/linux/kernel/git/arnd/cell-2.6: (37 commits)
[CELL] spufs: rework list management and associated locking
[CELL] oprofile: add support to OProfile for profiling CELL BE SPUs
[CELL] oprofile: enable SPU switch notification to detect currently active SPU tasks
[CELL] spu_base: locking cleanup
[CELL] cell: indexing of SPUs based on firmware vicinity properties
[CELL] spufs: integration of SPE affinity with the scheduller
[CELL] cell: add placement computation for scheduling of affinity contexts
[CELL] spufs: extension of spu_create to support affinity definition
[CELL] cell: add hardcoded spu vicinity information for QS20
[CELL] cell: add vicinity information on spus
[CELL] cell: add per BE structure with info about its SPUs
[CELL] spufs: use find_first_bit() instead of sched_find_first_bit()
[CELL] spufs: remove unused file argument from spufs_run_spu()
[CELL] spufs: change decrementer restore timing
[CELL] spufs: dont halt decrementer at restore step 47
[CELL] spufs: limit saving MFC_CNTL bits
[CELL] spufs: fix read and write for decr_status file
[CELL] spufs: fix decr_status meanings
[CELL] spufs: remove needless context save/restore code
[CELL] spufs: fix array size of channel index
...
The drivers reads the PCI subsystem ID into its state structure, but it's
never used anywhere.
Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
The patch adds checking of kthread_run return code and issues a message
if it fails.
Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
If v4l2_ctrl_next is called without the V4L2_CTRL_FLAG_NEXT_CTRL then it
should check whether the passed control ID is valid and return 0 if it
isn't. Otherwise a for-loop over the control IDs will never end.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
When videodev2.h is included by an application, it needs to include
<sys/time.h> for the timeval struct.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
The VBI DMA is handled in a special way and is marked with a bit.
However, that bit was set at the wrong time and could be cleared
by mistake if a PCM (or other) DMA request would arrive before the
VBI DMA was completed. So on completion of the VBI DMA the driver
no longer knew that that DMA transfer was for VBI data. And this
in turn caused havoc with the card's DMA engine.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
