Commit Graph

60 Commits

Author SHA1 Message Date
Al Viro
b5266eb4c8 [PATCH] switch a bunch of LSM hooks from nameidata to path
Namely, ones from namespace.c

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-04-21 23:13:23 -04:00
Linus Torvalds
3925e6fc1f Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6:
  security: fix up documentation for security_module_enable
  Security: Introduce security= boot parameter
  Audit: Final renamings and cleanup
  SELinux: use new audit hooks, remove redundant exports
  Audit: internally use the new LSM audit hooks
  LSM/Audit: Introduce generic Audit LSM hooks
  SELinux: remove redundant exports
  Netlink: Use generic LSM hook
  Audit: use new LSM hooks instead of SELinux exports
  SELinux: setup new inode/ipc getsecid hooks
  LSM: Introduce inode_getsecid and ipc_getsecid hooks
2008-04-18 18:18:30 -07:00
Ahmed S. Darwish
076c54c5bc Security: Introduce security= boot parameter
Add the security= boot parameter. This is done to avoid LSM
registration clashes in case of more than one bult-in module.

User can choose a security module to enable at boot. If no
security= boot parameter is specified, only the first LSM
asking for registration will be loaded. An invalid security
module name will be treated as if no module has been chosen.

LSM modules must check now if they are allowed to register
by calling security_module_enable(ops) first. Modify SELinux
and SMACK to do so.

Do not let SMACK register smackfs if it was not chosen on
boot. Smackfs assumes that smack hooks are registered and
the initial task security setup (swapper->security) is done.

Signed-off-by: Ahmed S. Darwish <darwish.07@gmail.com>
Acked-by: James Morris <jmorris@namei.org>
2008-04-19 10:00:51 +10:00
Ahmed S. Darwish
03d37d25e0 LSM/Audit: Introduce generic Audit LSM hooks
Introduce a generic Audit interface for security modules
by adding the following new LSM hooks:

audit_rule_init(field, op, rulestr, lsmrule)
audit_rule_known(krule)
audit_rule_match(secid, field, op, rule, actx)
audit_rule_free(rule)

Those hooks are only available if CONFIG_AUDIT is enabled.

Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Ahmed S. Darwish <darwish.07@gmail.com>
Acked-by: James Morris <jmorris@namei.org>
Reviewed-by: Paul Moore <paul.moore@hp.com>
2008-04-19 09:52:36 +10:00
Ahmed S. Darwish
8a076191f3 LSM: Introduce inode_getsecid and ipc_getsecid hooks
Introduce inode_getsecid(inode, secid) and ipc_getsecid(ipcp, secid)
LSM hooks. These hooks will be used instead of similar exported
SELinux interfaces.

Let {inode,ipc,task}_getsecid hooks set the secid to 0 by default
if CONFIG_SECURITY is not defined or if the hook is set to
NULL (dummy). This is done to notify the caller that no valid
secid exists.

Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Ahmed S. Darwish <darwish.07@gmail.com>
Acked-by: James Morris <jmorris@namei.org>
Reviewed-by: Paul Moore <paul.moore@hp.com>
2008-04-19 09:52:32 +10:00
Paul Moore
03e1ad7b5d LSM: Make the Labeled IPsec hooks more stack friendly
The xfrm_get_policy() and xfrm_add_pol_expire() put some rather large structs
on the stack to work around the LSM API.  This patch attempts to fix that
problem by changing the LSM API to require only the relevant "security"
pointers instead of the entire SPD entry; we do this for all of the
security_xfrm_policy*() functions to keep things consistent.

Signed-off-by: Paul Moore <paul.moore@hp.com>
Acked-by: James Morris <jmorris@namei.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-12 19:07:52 -07:00
Eric Paris
e000752989 LSM/SELinux: Interfaces to allow FS to control mount options
Introduce new LSM interfaces to allow an FS to deal with their own mount
options.  This includes a new string parsing function exported from the
LSM that an FS can use to get a security data blob and a new security
data blob.  This is particularly useful for an FS which uses binary
mount data, like NFS, which does not pass strings into the vfs to be
handled by the loaded LSM.  Also fix a BUG() in both SELinux and SMACK
when dealing with binary mount data.  If the binary mount data is less
than one page the copy_page() in security_sb_copy_data() can cause an
illegal page fault and boom.  Remove all NFSisms from the SELinux code
since they were broken by past NFS changes.

Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: James Morris <jmorris@namei.org>
2008-03-06 08:40:53 +11:00
Andrew Morgan
e338d263a7 Add 64-bit capability support to the kernel
The patch supports legacy (32-bit) capability userspace, and where possible
translates 32-bit capabilities to/from userspace and the VFS to 64-bit
kernel space capabilities.  If a capability set cannot be compressed into
32-bits for consumption by user space, the system call fails, with -ERANGE.

FWIW libcap-2.00 supports this change (and earlier capability formats)

 http://www.kernel.org/pub/linux/libs/security/linux-privs/kernel-2.6/

[akpm@linux-foundation.org: coding-syle fixes]
[akpm@linux-foundation.org: use get_task_comm()]
[ezk@cs.sunysb.edu: build fix]
[akpm@linux-foundation.org: do not initialise statics to 0 or NULL]
[akpm@linux-foundation.org: unused var]
[serue@us.ibm.com: export __cap_ symbols]
Signed-off-by: Andrew G. Morgan <morgan@kernel.org>
Cc: Stephen Smalley <sds@tycho.nsa.gov>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Cc: Chris Wright <chrisw@sous-sol.org>
Cc: James Morris <jmorris@namei.org>
Cc: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Erez Zadok <ezk@cs.sunysb.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-05 09:44:20 -08:00
David P. Quigley
4249259404 VFS/Security: Rework inode_getsecurity and callers to return resulting buffer
This patch modifies the interface to inode_getsecurity to have the function
return a buffer containing the security blob and its length via parameters
instead of relying on the calling function to give it an appropriately sized
buffer.

Security blobs obtained with this function should be freed using the
release_secctx LSM hook.  This alleviates the problem of the caller having to
guess a length and preallocate a buffer for this function allowing it to be
used elsewhere for Labeled NFS.

The patch also removed the unused err parameter.  The conversion is similar to
the one performed by Al Viro for the security_getprocattr hook.

Signed-off-by: David P. Quigley <dpquigl@tycho.nsa.gov>
Cc: Stephen Smalley <sds@tycho.nsa.gov>
Cc: Chris Wright <chrisw@sous-sol.org>
Acked-by: James Morris <jmorris@namei.org>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Cc: Casey Schaufler <casey@schaufler-ca.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-05 09:44:20 -08:00
David Howells
63cb344923 security: add a secctx_to_secid() hook
Add a secctx_to_secid() LSM hook to go along with the existing
secid_to_secctx() LSM hook.  This patch also includes the SELinux
implementation for this hook.

Signed-off-by: Paul Moore <paul.moore@hp.com>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: James Morris <jmorris@namei.org>
2008-01-25 11:29:53 +11:00
H. Peter Anvin
bced95283e security: remove security_sb_post_mountroot hook
The security_sb_post_mountroot() hook is long-since obsolete, and is
fundamentally broken: it is never invoked if someone uses initramfs.
This is particularly damaging, because the existence of this hook has
been used as motivation for not using initramfs.

Stephen Smalley confirmed on 2007-07-19 that this hook was originally
used by SELinux but can now be safely removed:

     http://marc.info/?l=linux-kernel&m=118485683612916&w=2

Cc: Stephen Smalley <sds@tycho.nsa.gov>
Cc: James Morris <jmorris@namei.org>
Cc: Eric Paris <eparis@parisplace.org>
Cc: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: James Morris <jmorris@namei.org>
2008-01-25 11:29:50 +11:00
Eric Paris
c9180a57a9 Security: add get, set, and cloning of superblock security information
Adds security_get_sb_mnt_opts, security_set_sb_mnt_opts, and
security_clont_sb_mnt_opts to the LSM and to SELinux.  This will allow
filesystems to directly own and control all of their mount options if they
so choose.  This interface deals only with option identifiers and strings so
it should generic enough for any LSM which may come in the future.

Filesystems which pass text mount data around in the kernel (almost all of
them) need not currently make use of this interface when dealing with
SELinux since it will still parse those strings as it always has.  I assume
future LSM's would do the same.  NFS is the primary FS which does not use
text mount data and thus must make use of this interface.

An LSM would need to implement these functions only if they had mount time
options, such as selinux has context= or fscontext=.  If the LSM has no
mount time options they could simply not implement and let the dummy ops
take care of things.

An LSM other than SELinux would need to define new option numbers in
security.h and any FS which decides to own there own security options would
need to be patched to use this new interface for every possible LSM.  This
is because it was stated to me very clearly that LSM's should not attempt to
understand FS mount data and the burdon to understand security should be in
the FS which owns the options.

Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Stephen D. Smalley <sds@tycho.nsa.gov>
Signed-off-by: James Morris <jmorris@namei.org>
2008-01-25 11:29:46 +11:00
Eric Paris
ab5a91a836 Security: allow capable check to permit mmap or low vm space
On a kernel with CONFIG_SECURITY but without an LSM which implements
security_file_mmap it is impossible for an application to mmap addresses
lower than mmap_min_addr.  Based on a suggestion from a developer in the
openwall community this patch adds a check for CAP_SYS_RAWIO.  It is
assumed that any process with this capability can harm the system a lot
more easily than writing some stuff on the zero page and then trying to
get the kernel to trip over itself.  It also means that programs like X
on i686 which use vm86 emulation can work even with mmap_min_addr set.

Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>
2007-12-06 00:24:30 +11:00
Andrew Morgan
72c2d5823f V3 file capabilities: alter behavior of cap_setpcap
The non-filesystem capability meaning of CAP_SETPCAP is that a process, p1,
can change the capabilities of another process, p2.  This is not the
meaning that was intended for this capability at all, and this
implementation came about purely because, without filesystem capabilities,
there was no way to use capabilities without one process bestowing them on
another.

Since we now have a filesystem support for capabilities we can fix the
implementation of CAP_SETPCAP.

The most significant thing about this change is that, with it in effect, no
process can set the capabilities of another process.

The capabilities of a program are set via the capability convolution
rules:

   pI(post-exec) = pI(pre-exec)
   pP(post-exec) = (X(aka cap_bset) & fP) | (pI(post-exec) & fI)
   pE(post-exec) = fE ? pP(post-exec) : 0

at exec() time.  As such, the only influence the pre-exec() program can
have on the post-exec() program's capabilities are through the pI
capability set.

The correct implementation for CAP_SETPCAP (and that enabled by this patch)
is that it can be used to add extra pI capabilities to the current process
- to be picked up by subsequent exec()s when the above convolution rules
are applied.

Here is how it works:

Let's say we have a process, p. It has capability sets, pE, pP and pI.
Generally, p, can change the value of its own pI to pI' where

   (pI' & ~pI) & ~pP = 0.

That is, the only new things in pI' that were not present in pI need to
be present in pP.

The role of CAP_SETPCAP is basically to permit changes to pI beyond
the above:

   if (pE & CAP_SETPCAP) {
      pI' = anything; /* ie., even (pI' & ~pI) & ~pP != 0  */
   }

This capability is useful for things like login, which (say, via
pam_cap) might want to raise certain inheritable capabilities for use
by the children of the logged-in user's shell, but those capabilities
are not useful to or needed by the login program itself.

One such use might be to limit who can run ping. You set the
capabilities of the 'ping' program to be "= cap_net_raw+i", and then
only shells that have (pI & CAP_NET_RAW) will be able to run
it. Without CAP_SETPCAP implemented as described above, login(pam_cap)
would have to also have (pP & CAP_NET_RAW) in order to raise this
capability and pass it on through the inheritable set.

Signed-off-by: Andrew Morgan <morgan@kernel.org>
Signed-off-by: Serge E. Hallyn <serue@us.ibm.com>
Cc: Stephen Smalley <sds@tycho.nsa.gov>
Cc: James Morris <jmorris@namei.org>
Cc: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-18 14:37:24 -07:00
Adrian Bunk
cbfee34520 security/ cleanups
This patch contains the following cleanups that are now possible:
- remove the unused security_operations->inode_xattr_getsuffix
- remove the no longer used security_operations->unregister_security
- remove some no longer required exit code
- remove a bunch of no longer used exports

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Acked-by: James Morris <jmorris@namei.org>
Cc: Chris Wright <chrisw@sous-sol.org>
Cc: Stephen Smalley <sds@tycho.nsa.gov>
Cc: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17 08:43:07 -07:00
Serge E. Hallyn
b53767719b Implement file posix capabilities
Implement file posix capabilities.  This allows programs to be given a
subset of root's powers regardless of who runs them, without having to use
setuid and giving the binary all of root's powers.

This version works with Kaigai Kohei's userspace tools, found at
http://www.kaigai.gr.jp/index.php.  For more information on how to use this
patch, Chris Friedhoff has posted a nice page at
http://www.friedhoff.org/fscaps.html.

Changelog:
	Nov 27:
	Incorporate fixes from Andrew Morton
	(security-introduce-file-caps-tweaks and
	security-introduce-file-caps-warning-fix)
	Fix Kconfig dependency.
	Fix change signaling behavior when file caps are not compiled in.

	Nov 13:
	Integrate comments from Alexey: Remove CONFIG_ ifdef from
	capability.h, and use %zd for printing a size_t.

	Nov 13:
	Fix endianness warnings by sparse as suggested by Alexey
	Dobriyan.

	Nov 09:
	Address warnings of unused variables at cap_bprm_set_security
	when file capabilities are disabled, and simultaneously clean
	up the code a little, by pulling the new code into a helper
	function.

	Nov 08:
	For pointers to required userspace tools and how to use
	them, see http://www.friedhoff.org/fscaps.html.

	Nov 07:
	Fix the calculation of the highest bit checked in
	check_cap_sanity().

	Nov 07:
	Allow file caps to be enabled without CONFIG_SECURITY, since
	capabilities are the default.
	Hook cap_task_setscheduler when !CONFIG_SECURITY.
	Move capable(TASK_KILL) to end of cap_task_kill to reduce
	audit messages.

	Nov 05:
	Add secondary calls in selinux/hooks.c to task_setioprio and
	task_setscheduler so that selinux and capabilities with file
	cap support can be stacked.

	Sep 05:
	As Seth Arnold points out, uid checks are out of place
	for capability code.

	Sep 01:
	Define task_setscheduler, task_setioprio, cap_task_kill, and
	task_setnice to make sure a user cannot affect a process in which
	they called a program with some fscaps.

	One remaining question is the note under task_setscheduler: are we
	ok with CAP_SYS_NICE being sufficient to confine a process to a
	cpuset?

	It is a semantic change, as without fsccaps, attach_task doesn't
	allow CAP_SYS_NICE to override the uid equivalence check.  But since
	it uses security_task_setscheduler, which elsewhere is used where
	CAP_SYS_NICE can be used to override the uid equivalence check,
	fixing it might be tough.

	     task_setscheduler
		 note: this also controls cpuset:attach_task.  Are we ok with
		     CAP_SYS_NICE being used to confine to a cpuset?
	     task_setioprio
	     task_setnice
		 sys_setpriority uses this (through set_one_prio) for another
		 process.  Need same checks as setrlimit

	Aug 21:
	Updated secureexec implementation to reflect the fact that
	euid and uid might be the same and nonzero, but the process
	might still have elevated caps.

	Aug 15:
	Handle endianness of xattrs.
	Enforce capability version match between kernel and disk.
	Enforce that no bits beyond the known max capability are
	set, else return -EPERM.
	With this extra processing, it may be worth reconsidering
	doing all the work at bprm_set_security rather than
	d_instantiate.

	Aug 10:
	Always call getxattr at bprm_set_security, rather than
	caching it at d_instantiate.

[morgan@kernel.org: file-caps clean up for linux/capability.h]
[bunk@kernel.org: unexport cap_inode_killpriv]
Signed-off-by: Serge E. Hallyn <serue@us.ibm.com>
Cc: Stephen Smalley <sds@tycho.nsa.gov>
Cc: James Morris <jmorris@namei.org>
Cc: Chris Wright <chrisw@sous-sol.org>
Cc: Andrew Morgan <morgan@kernel.org>
Signed-off-by: Andrew Morgan <morgan@kernel.org>
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17 08:43:07 -07:00
James Morris
20510f2f4e security: Convert LSM into a static interface
Convert LSM into a static interface, as the ability to unload a security
module is not required by in-tree users and potentially complicates the
overall security architecture.

Needlessly exported LSM symbols have been unexported, to help reduce API
abuse.

Parameters for the capability and root_plug modules are now specified
at boot.

The SECURITY_FRAMEWORK_VERSION macro has also been removed.

In a nutshell, there is no safe way to unload an LSM.  The modular interface
is thus unecessary and broken infrastructure.  It is used only by out-of-tree
modules, which are often binary-only, illegal, abusive of the API and
dangerous, e.g.  silently re-vectoring SELinux.

[akpm@linux-foundation.org: cleanups]
[akpm@linux-foundation.org: USB Kconfig fix]
[randy.dunlap@oracle.com: fix LSM kernel-doc]
Signed-off-by: James Morris <jmorris@namei.org>
Acked-by: Chris Wright <chrisw@sous-sol.org>
Cc: Stephen Smalley <sds@tycho.nsa.gov>
Cc: "Serge E. Hallyn" <serue@us.ibm.com>
Acked-by: Arjan van de Ven <arjan@infradead.org>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17 08:43:07 -07:00
Yuichi Nakamura
788e7dd4c2 SELinux: Improve read/write performance
It reduces the selinux overhead on read/write by only revalidating
permissions in selinux_file_permission if the task or inode labels have
changed or the policy has changed since the open-time check.  A new LSM
hook, security_dentry_open, is added to capture the necessary state at open
time to allow this optimization.

(see http://marc.info/?l=selinux&m=118972995207740&w=2)

Signed-off-by: Yuichi Nakamura<ynakam@hitachisoft.jp>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: James Morris <jmorris@namei.org>
2007-10-17 08:59:31 +10:00
Alan Cox
34b4e4aa3c fix NULL pointer dereference in __vm_enough_memory()
The new exec code inserts an accounted vma into an mm struct which is not
current->mm.  The existing memory check code has a hard coded assumption
that this does not happen as does the security code.

As the correct mm is known we pass the mm to the security method and the
helper function.  A new security test is added for the case where we need
to pass the mm and the existing one is modified to pass current->mm to
avoid the need to change large amounts of code.

(Thanks to Tobias for fixing rejects and testing)

Signed-off-by: Alan Cox <alan@redhat.com>
Cc: WU Fengguang <wfg@mail.ustc.edu.cn>
Cc: James Morris <jmorris@redhat.com>
Cc: Tobias Diedrich <ranma+kernel@tdiedrich.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-22 19:52:45 -07:00
Kawai, Hidehiro
6c5d523826 coredump masking: reimplementation of dumpable using two flags
This patch changes mm_struct.dumpable to a pair of bit flags.

set_dumpable() converts three-value dumpable to two flags and stores it into
lower two bits of mm_struct.flags instead of mm_struct.dumpable.
get_dumpable() behaves in the opposite way.

[akpm@linux-foundation.org: export set_dumpable]
Signed-off-by: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: David Howells <dhowells@redhat.com>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 10:04:46 -07:00
Eric Paris
ed03218951 security: Protection for exploiting null dereference using mmap
Add a new security check on mmap operations to see if the user is attempting
to mmap to low area of the address space.  The amount of space protected is
indicated by the new proc tunable /proc/sys/vm/mmap_min_addr and defaults to
0, preserving existing behavior.

This patch uses a new SELinux security class "memprotect."  Policy already
contains a number of allow rules like a_t self:process * (unconfined_t being
one of them) which mean that putting this check in the process class (its
best current fit) would make it useless as all user processes, which we also
want to protect against, would be allowed. By taking the memprotect name of
the new class it will also make it possible for us to move some of the other
memory protect permissions out of 'process' and into the new class next time
we bump the policy version number (which I also think is a good future idea)

Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
Acked-by: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>
2007-07-11 22:52:29 -04:00
Al Viro
04ff97086b [PATCH] sanitize security_getprocattr() API
have it return the buffer it had allocated

Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
Acked-by: James Morris <jmorris@namei.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-14 15:27:48 -07:00
Venkat Yekkirala
67f83cbf08 SELinux: Fix SA selection semantics
Fix the selection of an SA for an outgoing packet to be at the same
context as the originating socket/flow. This eliminates the SELinux
policy's ability to use/sendto SAs with contexts other than the socket's.

With this patch applied, the SELinux policy will require one or more of the
following for a socket to be able to communicate with/without SAs:

1. To enable a socket to communicate without using labeled-IPSec SAs:

allow socket_t unlabeled_t:association { sendto recvfrom }

2. To enable a socket to communicate with labeled-IPSec SAs:

allow socket_t self:association { sendto };
allow socket_t peer_sa_t:association { recvfrom };

Signed-off-by: Venkat Yekkirala <vyekkirala@TrustedCS.com>
Signed-off-by: James Morris <jmorris@namei.org>
2006-12-02 21:21:34 -08:00
Venkat Yekkirala
6b877699c6 SELinux: Return correct context for SO_PEERSEC
Fix SO_PEERSEC for tcp sockets to return the security context of
the peer (as represented by the SA from the peer) as opposed to the
SA used by the local/source socket.

Signed-off-by: Venkat Yekkirala <vyekkirala@TrustedCS.com>
Signed-off-by: James Morris <jmorris@namei.org>
2006-12-02 21:21:33 -08:00
Venkat Yekkirala
c1a856c964 SELinux: Various xfrm labeling fixes
Since the upstreaming of the mlsxfrm modification a few months back,
testing has resulted in the identification of the following issues/bugs that
are resolved in this patch set.

1. Fix the security context used in the IKE negotiation to be the context
   of the socket as opposed to the context of the SPD rule.

2. Fix SO_PEERSEC for tcp sockets to return the security context of
   the peer as opposed to the source.

3. Fix the selection of an SA for an outgoing packet to be at the same
   context as the originating socket/flow.

The following would be the result of applying this patchset:

- SO_PEERSEC will now correctly return the peer's context.

- IKE deamons will receive the context of the source socket/flow
  as opposed to the SPD rule's context so that the negotiated SA
  will be at the same context as the source socket/flow.

- The SELinux policy will require one or more of the
  following for a socket to be able to communicate with/without SAs:

  1. To enable a socket to communicate without using labeled-IPSec SAs:

     allow socket_t unlabeled_t:association { sendto recvfrom }

  2. To enable a socket to communicate with labeled-IPSec SAs:

     allow socket_t self:association { sendto };
     allow socket_t peer_sa_t:association { recvfrom };

This Patch: Pass correct security context to IKE for use in negotiation

Fix the security context passed to IKE for use in negotiation to be the
context of the socket as opposed to the context of the SPD rule so that
the SA carries the label of the originating socket/flow.

Signed-off-by: Venkat Yekkirala <vyekkirala@TrustedCS.com>
Signed-off-by: James Morris <jmorris@namei.org>
2006-12-02 21:21:31 -08:00
Venkat Yekkirala
5b368e61c2 IPsec: correct semantics for SELinux policy matching
Currently when an IPSec policy rule doesn't specify a security
context, it is assumed to be "unlabeled" by SELinux, and so
the IPSec policy rule fails to match to a flow that it would
otherwise match to, unless one has explicitly added an SELinux
policy rule allowing the flow to "polmatch" to the "unlabeled"
IPSec policy rules. In the absence of such an explicitly added
SELinux policy rule, the IPSec policy rule fails to match and
so the packet(s) flow in clear text without the otherwise applicable
xfrm(s) applied.

The above SELinux behavior violates the SELinux security notion of
"deny by default" which should actually translate to "encrypt by
default" in the above case.

This was first reported by Evgeniy Polyakov and the way James Morris
was seeing the problem was when connecting via IPsec to a
confined service on an SELinux box (vsftpd), which did not have the
appropriate SELinux policy permissions to send packets via IPsec.

With this patch applied, SELinux "polmatching" of flows Vs. IPSec
policy rules will only come into play when there's a explicit context
specified for the IPSec policy rule (which also means there's corresponding
SELinux policy allowing appropriate domains/flows to polmatch to this context).

Secondly, when a security module is loaded (in this case, SELinux), the
security_xfrm_policy_lookup() hook can return errors other than access denied,
such as -EINVAL.  We were not handling that correctly, and in fact
inverting the return logic and propagating a false "ok" back up to
xfrm_lookup(), which then allowed packets to pass as if they were not
associated with an xfrm policy.

The solution for this is to first ensure that errno values are
correctly propagated all the way back up through the various call chains
from security_xfrm_policy_lookup(), and handled correctly.

Then, flow_cache_lookup() is modified, so that if the policy resolver
fails (typically a permission denied via the security module), the flow
cache entry is killed rather than having a null policy assigned (which
indicates that the packet can pass freely).  This also forces any future
lookups for the same flow to consult the security module (e.g. SELinux)
for current security policy (rather than, say, caching the error on the
flow cache entry).

This patch: Fix the selinux side of things.

This makes sure SELinux polmatching of flow contexts to IPSec policy
rules comes into play only when an explicit context is associated
with the IPSec policy rule.

Also, this no longer defaults the context of a socket policy to
the context of the socket since the "no explicit context" case
is now handled properly.

Signed-off-by: Venkat Yekkirala <vyekkirala@TrustedCS.com>
Signed-off-by: James Morris <jmorris@namei.org>
2006-10-11 23:59:37 -07:00
Venkat Yekkirala
7420ed23a4 [NetLabel]: SELinux support
Add NetLabel support to the SELinux LSM and modify the
socket_post_create() LSM hook to return an error code.  The most
significant part of this patch is the addition of NetLabel hooks into
the following SELinux LSM hooks:

 * selinux_file_permission()
 * selinux_socket_sendmsg()
 * selinux_socket_post_create()
 * selinux_socket_sock_rcv_skb()
 * selinux_socket_getpeersec_stream()
 * selinux_socket_getpeersec_dgram()
 * selinux_sock_graft()
 * selinux_inet_conn_request()

The basic reasoning behind this patch is that outgoing packets are
"NetLabel'd" by labeling their socket and the NetLabel security
attributes are checked via the additional hook in
selinux_socket_sock_rcv_skb().  NetLabel itself is only a labeling
mechanism, similar to filesystem extended attributes, it is up to the
SELinux enforcement mechanism to perform the actual access checks.

In addition to the changes outlined above this patch also includes
some changes to the extended bitmap (ebitmap) and multi-level security
(mls) code to import and export SELinux TE/MLS attributes into and out
of NetLabel.

Signed-off-by: Paul Moore <paul.moore@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22 14:53:36 -07:00
Venkat Yekkirala
4237c75c0a [MLSXFRM]: Auto-labeling of child sockets
This automatically labels the TCP, Unix stream, and dccp child sockets
as well as openreqs to be at the same MLS level as the peer. This will
result in the selection of appropriately labeled IPSec Security
Associations.

This also uses the sock's sid (as opposed to the isec sid) in SELinux
enforcement of secmark in rcv_skb and postroute_last hooks.

Signed-off-by: Venkat Yekkirala <vyekkirala@TrustedCS.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22 14:53:29 -07:00
Venkat Yekkirala
cb969f072b [MLSXFRM]: Default labeling of socket specific IPSec policies
This defaults the label of socket-specific IPSec policies to be the
same as the socket they are set on.

Signed-off-by: Venkat Yekkirala <vyekkirala@TrustedCS.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22 14:53:28 -07:00
Venkat Yekkirala
beb8d13bed [MLSXFRM]: Add flow labeling
This labels the flows that could utilize IPSec xfrms at the points the
flows are defined so that IPSec policy and SAs at the right label can
be used.

The following protos are currently not handled, but they should
continue to be able to use single-labeled IPSec like they currently
do.

ipmr
ip_gre
ipip
igmp
sit
sctp
ip6_tunnel (IPv6 over IPv6 tunnel device)
decnet

Signed-off-by: Venkat Yekkirala <vyekkirala@TrustedCS.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22 14:53:27 -07:00
Venkat Yekkirala
e0d1caa7b0 [MLSXFRM]: Flow based matching of xfrm policy and state
This implements a seemless mechanism for xfrm policy selection and
state matching based on the flow sid. This also includes the necessary
SELinux enforcement pieces.

Signed-off-by: Venkat Yekkirala <vyekkirala@TrustedCS.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22 14:53:24 -07:00
Venkat Yekkirala
892c141e62 [MLSXFRM]: Add security sid to sock
This adds security for IP sockets at the sock level. Security at the
sock level is needed to enforce the SELinux security policy for
security associations even when a sock is orphaned (such as in the TCP
LAST_ACK state).

This will also be used to enforce SELinux controls over data arriving
at or leaving a child socket while it's still waiting to be accepted.

Signed-off-by: Venkat Yekkirala <vyekkirala@TrustedCS.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22 14:53:22 -07:00
Catherine Zhang
dc49c1f94e [AF_UNIX]: Kernel memory leak fix for af_unix datagram getpeersec patch
From: Catherine Zhang <cxzhang@watson.ibm.com>

This patch implements a cleaner fix for the memory leak problem of the
original unix datagram getpeersec patch.  Instead of creating a
security context each time a unix datagram is sent, we only create the
security context when the receiver requests it.

This new design requires modification of the current
unix_getsecpeer_dgram LSM hook and addition of two new hooks, namely,
secid_to_secctx and release_secctx.  The former retrieves the security
context and the latter releases it.  A hook is required for releasing
the security context because it is up to the security module to decide
how that's done.  In the case of Selinux, it's a simple kfree
operation.

Acked-by:  Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-08-02 14:12:06 -07:00
Linus Torvalds
22a3e233ca Merge git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial
* git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial:
  Remove obsolete #include <linux/config.h>
  remove obsolete swsusp_encrypt
  arch/arm26/Kconfig typos
  Documentation/IPMI typos
  Kconfig: Typos in net/sched/Kconfig
  v9fs: do not include linux/version.h
  Documentation/DocBook/mtdnand.tmpl: typo fixes
  typo fixes: specfic -> specific
  typo fixes in Documentation/networking/pktgen.txt
  typo fixes: occuring -> occurring
  typo fixes: infomation -> information
  typo fixes: disadvantadge -> disadvantage
  typo fixes: aquire -> acquire
  typo fixes: mecanism -> mechanism
  typo fixes: bandwith -> bandwidth
  fix a typo in the RTC_CLASS help text
  smb is no longer maintained

Manually merged trivial conflict in arch/um/kernel/vmlinux.lds.S
2006-06-30 15:39:30 -07:00
David Quigley
a1836a42da [PATCH] SELinux: Add security hook definition for getioprio and insert hooks
Add a new security hook definition for the sys_ioprio_get operation.  At
present, the SELinux hook function implementation for this hook is
identical to the getscheduler implementation but a separate hook is
introduced to allow this check to be specialized in the future if
necessary.

This patch also creates a helper function get_task_ioprio which handles the
access check in addition to retrieving the ioprio value for the task.

Signed-off-by: David Quigley <dpquigl@tycho.nsa.gov>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: James Morris <jmorris@namei.org>
Cc: Jens Axboe <axboe@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-30 11:25:37 -07:00
David Quigley
f9008e4c5c [PATCH] SELinux: extend task_kill hook to handle signals sent by AIO completion
This patch extends the security_task_kill hook to handle signals sent by AIO
completion.  In this case, the secid of the task responsible for the signal
needs to be obtained and saved earlier, so a security_task_getsecid() hook is
added, and then this saved value is passed subsequently to the extended
task_kill hook for use in checking.

Signed-off-by: David Quigley <dpquigl@tycho.nsa.gov>
Signed-off-by: James Morris <jmorris@namei.org>
Cc: Stephen Smalley <sds@tycho.nsa.gov>
Cc: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-30 11:25:36 -07:00
Jörn Engel
6ab3d5624e Remove obsolete #include <linux/config.h>
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-30 19:25:36 +02:00
Darrel Goeddel
c7bdb545d2 [NETLINK]: Encapsulate eff_cap usage within security framework.
This patch encapsulates the usage of eff_cap (in netlink_skb_params) within
the security framework by extending security_netlink_recv to include a required
capability parameter and converting all direct usage of eff_caps outside
of the lsm modules to use the interface.  It also updates the SELinux
implementation of the security_netlink_send and security_netlink_recv
hooks to take advantage of the sid in the netlink_skb_params struct.
This also enables SELinux to perform auditing of netlink capability checks.
Please apply, for 2.6.18 if possible.

Signed-off-by: Darrel Goeddel <dgoeddel@trustedcs.com>
Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>
Acked-by:  James Morris <jmorris@namei.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-29 16:57:55 -07:00
David Howells
7e047ef5fe [PATCH] keys: sort out key quota system
Add the ability for key creation to overrun the user's quota in some
circumstances - notably when a session keyring is created and assigned to a
process that didn't previously have one.

This means it's still possible to log in, should PAM require the creation of a
new session keyring, and fix an overburdened key quota.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 09:58:18 -07:00
David Quigley
35601547ba [PATCH] SELinux: add task_movememory hook
This patch adds new security hook, task_movememory, to be called when memory
owened by a task is to be moved (e.g.  when migrating pages to a this hook is
identical to the setscheduler implementation, but a separate hook introduced
to allow this check to be specialized in the future if necessary.

Since the last posting, the hook has been renamed following feedback from
Christoph Lameter.

Signed-off-by: David Quigley <dpquigl@tycho.nsa.gov>
Acked-by:  Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: James Morris <jmorris@namei.org>
Cc: Christoph Lameter <clameter@sgi.com>
Cc: Andi Kleen <ak@muc.de>
Acked-by: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 07:42:54 -07:00
James Morris
03e6806063 [PATCH] lsm: add task_setioprio hook
Implement an LSM hook for setting a task's IO priority, similar to the hook
for setting a tasks's nice value.

A previous version of this LSM hook was included in an older version of
multiadm by Jan Engelhardt, although I don't recall it being submitted
upstream.

Also included is the corresponding SELinux hook, which re-uses the setsched
permission in the proccess class.

Signed-off-by: James Morris <jmorris@namei.org>
Acked-by:  Stephen Smalley <sds@tycho.nsa.gov>
Cc: Jan Engelhardt <jengelh@linux01.gwdg.de>
Cc: Chris Wright <chrisw@sous-sol.org>
Cc: Jens Axboe <axboe@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 07:42:53 -07:00
David Howells
726c334223 [PATCH] VFS: Permit filesystem to perform statfs with a known root dentry
Give the statfs superblock operation a dentry pointer rather than a superblock
pointer.

This complements the get_sb() patch.  That reduced the significance of
sb->s_root, allowing NFS to place a fake root there.  However, NFS does
require a dentry to use as a target for the statfs operation.  This permits
the root in the vfsmount to be used instead.

linux/mount.h has been added where necessary to make allyesconfig build
successfully.

Interest has also been expressed for use with the FUSE and XFS filesystems.

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Cc: Nathan Scott <nathans@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 07:42:45 -07:00
Michael LeMay
d720024e94 [PATCH] selinux: add hooks for key subsystem
Introduce SELinux hooks to support the access key retention subsystem
within the kernel.  Incorporate new flask headers from a modified version
of the SELinux reference policy, with support for the new security class
representing retained keys.  Extend the "key_alloc" security hook with a
task parameter representing the intended ownership context for the key
being allocated.  Attach security information to root's default keyrings
within the SELinux initialization routine.

Has passed David's testsuite.

Signed-off-by: Michael LeMay <mdlemay@epoch.ncsc.mil>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>
Acked-by: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-22 15:05:55 -07:00
Catherine Zhang
c8c05a8eec [LSM-IPsec]: SELinux Authorize
This patch contains a fix for the previous patch that adds security
contexts to IPsec policies and security associations.  In the previous
patch, no authorization (besides the check for write permissions to
SAD and SPD) is required to delete IPsec policies and security
assocations with security contexts.  Thus a user authorized to change
SAD and SPD can bypass the IPsec policy authorization by simply
deleteing policies with security contexts.  To fix this security hole,
an additional authorization check is added for removing security
policies and security associations with security contexts.

Note that if no security context is supplied on add or present on
policy to be deleted, the SELinux module allows the change
unconditionally.  The hook is called on deletion when no context is
present, which we may want to change.  At present, I left it up to the
module.

LSM changes:

The patch adds two new LSM hooks: xfrm_policy_delete and
xfrm_state_delete.  The new hooks are necessary to authorize deletion
of IPsec policies that have security contexts.  The existing hooks
xfrm_policy_free and xfrm_state_free lack the context to do the
authorization, so I decided to split authorization of deletion and
memory management of security data, as is typical in the LSM
interface.

Use:

The new delete hooks are checked when xfrm_policy or xfrm_state are
deleted by either the xfrm_user interface (xfrm_get_policy,
xfrm_del_sa) or the pfkey interface (pfkey_spddelete, pfkey_delete).

SELinux changes:

The new policy_delete and state_delete functions are added.

Signed-off-by: Catherine Zhang <cxzhang@watson.ibm.com>
Signed-off-by: Trent Jaeger <tjaeger@cse.psu.edu>
Acked-by: James Morris <jmorris@namei.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-17 21:29:45 -07:00
Steve Grubb
9c7aa6aa74 [PATCH] change lspp ipc auditing
Hi,

The patch below converts IPC auditing to collect sid's and convert to context
string only if it needs to output an audit record. This patch depends on the
inode audit change patch already being applied.

Signed-off-by: Steve Grubb <sgrubb@redhat.com>

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2006-05-01 06:09:56 -04:00
Linus Torvalds
1b9a391736 Merge branch 'audit.b3' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/audit-current
* 'audit.b3' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/audit-current: (22 commits)
  [PATCH] fix audit_init failure path
  [PATCH] EXPORT_SYMBOL patch for audit_log, audit_log_start, audit_log_end and audit_format
  [PATCH] sem2mutex: audit_netlink_sem
  [PATCH] simplify audit_free() locking
  [PATCH] Fix audit operators
  [PATCH] promiscuous mode
  [PATCH] Add tty to syscall audit records
  [PATCH] add/remove rule update
  [PATCH] audit string fields interface + consumer
  [PATCH] SE Linux audit events
  [PATCH] Minor cosmetic cleanups to the code moved into auditfilter.c
  [PATCH] Fix audit record filtering with !CONFIG_AUDITSYSCALL
  [PATCH] Fix IA64 success/failure indication in syscall auditing.
  [PATCH] Miscellaneous bug and warning fixes
  [PATCH] Capture selinux subject/object context information.
  [PATCH] Exclude messages by message type
  [PATCH] Collect more inode information during syscall processing.
  [PATCH] Pass dentry, not just name, in fsnotify creation hooks.
  [PATCH] Define new range of userspace messages.
  [PATCH] Filter rule comparators
  ...

Fixed trivial conflict in security/selinux/hooks.c
2006-03-25 09:24:53 -08:00
Arnaldo Carvalho de Melo
c841aa0304 [SECURITY] getpeersec: Fix build breakage
A recent changeset removes dummy_socket_getpeersec, replacing it with
two new functions, but still references the removed function in the
security_fixup_ops table, fix it by doing the replacement operation in
the fixup table too.

Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20 22:47:37 -08:00
Catherine Zhang
2c7946a7bf [SECURITY]: TCP/UDP getpeersec
This patch implements an application of the LSM-IPSec networking
controls whereby an application can determine the label of the
security association its TCP or UDP sockets are currently connected to
via getsockopt and the auxiliary data mechanism of recvmsg.

Patch purpose:

This patch enables a security-aware application to retrieve the
security context of an IPSec security association a particular TCP or
UDP socket is using.  The application can then use this security
context to determine the security context for processing on behalf of
the peer at the other end of this connection.  In the case of UDP, the
security context is for each individual packet.  An example
application is the inetd daemon, which could be modified to start
daemons running at security contexts dependent on the remote client.

Patch design approach:

- Design for TCP
The patch enables the SELinux LSM to set the peer security context for
a socket based on the security context of the IPSec security
association.  The application may retrieve this context using
getsockopt.  When called, the kernel determines if the socket is a
connected (TCP_ESTABLISHED) TCP socket and, if so, uses the dst_entry
cache on the socket to retrieve the security associations.  If a
security association has a security context, the context string is
returned, as for UNIX domain sockets.

- Design for UDP
Unlike TCP, UDP is connectionless.  This requires a somewhat different
API to retrieve the peer security context.  With TCP, the peer
security context stays the same throughout the connection, thus it can
be retrieved at any time between when the connection is established
and when it is torn down.  With UDP, each read/write can have
different peer and thus the security context might change every time.
As a result the security context retrieval must be done TOGETHER with
the packet retrieval.

The solution is to build upon the existing Unix domain socket API for
retrieving user credentials.  Linux offers the API for obtaining user
credentials via ancillary messages (i.e., out of band/control messages
that are bundled together with a normal message).

Patch implementation details:

- Implementation for TCP
The security context can be retrieved by applications using getsockopt
with the existing SO_PEERSEC flag.  As an example (ignoring error
checking):

getsockopt(sockfd, SOL_SOCKET, SO_PEERSEC, optbuf, &optlen);
printf("Socket peer context is: %s\n", optbuf);

The SELinux function, selinux_socket_getpeersec, is extended to check
for labeled security associations for connected (TCP_ESTABLISHED ==
sk->sk_state) TCP sockets only.  If so, the socket has a dst_cache of
struct dst_entry values that may refer to security associations.  If
these have security associations with security contexts, the security
context is returned.

getsockopt returns a buffer that contains a security context string or
the buffer is unmodified.

- Implementation for UDP
To retrieve the security context, the application first indicates to
the kernel such desire by setting the IP_PASSSEC option via
getsockopt.  Then the application retrieves the security context using
the auxiliary data mechanism.

An example server application for UDP should look like this:

toggle = 1;
toggle_len = sizeof(toggle);

setsockopt(sockfd, SOL_IP, IP_PASSSEC, &toggle, &toggle_len);
recvmsg(sockfd, &msg_hdr, 0);
if (msg_hdr.msg_controllen > sizeof(struct cmsghdr)) {
    cmsg_hdr = CMSG_FIRSTHDR(&msg_hdr);
    if (cmsg_hdr->cmsg_len <= CMSG_LEN(sizeof(scontext)) &&
        cmsg_hdr->cmsg_level == SOL_IP &&
        cmsg_hdr->cmsg_type == SCM_SECURITY) {
        memcpy(&scontext, CMSG_DATA(cmsg_hdr), sizeof(scontext));
    }
}

ip_setsockopt is enhanced with a new socket option IP_PASSSEC to allow
a server socket to receive security context of the peer.  A new
ancillary message type SCM_SECURITY.

When the packet is received we get the security context from the
sec_path pointer which is contained in the sk_buff, and copy it to the
ancillary message space.  An additional LSM hook,
selinux_socket_getpeersec_udp, is defined to retrieve the security
context from the SELinux space.  The existing function,
selinux_socket_getpeersec does not suit our purpose, because the
security context is copied directly to user space, rather than to
kernel space.

Testing:

We have tested the patch by setting up TCP and UDP connections between
applications on two machines using the IPSec policies that result in
labeled security associations being built.  For TCP, we can then
extract the peer security context using getsockopt on either end.  For
UDP, the receiving end can retrieve the security context using the
auxiliary data mechanism of recvmsg.

Signed-off-by: Catherine Zhang <cxzhang@watson.ibm.com>
Acked-by: James Morris <jmorris@namei.org>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20 22:41:23 -08:00
Dustin Kirkland
7306a0b9b3 [PATCH] Miscellaneous bug and warning fixes
This patch fixes a couple of bugs revealed in new features recently
added to -mm1:
* fixes warnings due to inconsistent use of const struct inode *inode
* fixes bug that prevent a kernel from booting with audit on, and SELinux off
  due to a missing function in security/dummy.c
* fixes a bug that throws spurious audit_panic() messages due to a missing
  return just before an error_path label
* some reasonable house cleaning in audit_ipc_context(),
  audit_inode_context(), and audit_log_task_context()

Signed-off-by: Dustin Kirkland <dustin.kirkland@us.ibm.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-03-20 14:08:54 -05:00
Dustin Kirkland
8c8570fb8f [PATCH] Capture selinux subject/object context information.
This patch extends existing audit records with subject/object context
information. Audit records associated with filesystem inodes, ipc, and
tasks now contain SELinux label information in the field "subj" if the
item is performing the action, or in "obj" if the item is the receiver
of an action.

These labels are collected via hooks in SELinux and appended to the
appropriate record in the audit code.

This additional information is required for Common Criteria Labeled
Security Protection Profile (LSPP).

[AV: fixed kmalloc flags use]
[folded leak fixes]
[folded cleanup from akpm (kfree(NULL)]
[folded audit_inode_context() leak fix]
[folded akpm's fix for audit_ipc_perm() definition in case of !CONFIG_AUDIT]

Signed-off-by: Dustin Kirkland <dustin.kirkland@us.ibm.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2006-03-20 14:08:54 -05:00