Commit Graph

55 Commits

Author SHA1 Message Date
Tao Ma
81bad69749 ocfs2: Remove DISK_ALLOC from masklog.
Since all 4 files, localalloc.c, suballoc.c, alloc.c and
resize.c, which use DISK_ALLOC are changed to trace events,
Remove masklog DISK_ALLOC totally.

Signed-off-by: Tao Ma <boyu.mt@taobao.com>
2011-02-22 08:01:27 +08:00
Tao Ma
a04733d8af ocfs2: Remove mlog(0) from fs/ocfs2/localalloc.c
This is the 2nd step to remove the debug info of DISK_ALLOC.

So this patch removes all mlog(0,...) from localalloc.c and adds
the corresponding tracepoints. Different mlogs have different
solutions.
1. Some are replaced with trace event directly.
2. Some are replaced while some new parameters are added.
3. Some are combined into one trace events.
4. Some redundant mlogs are removed.

Signed-off-by: Tao Ma <boyu.mt@taobao.com>
2011-02-22 07:56:45 +08:00
Tao Ma
c1e8d35ef5 ocfs2: Remove EXIT from masklog.
mlog_exit is used to record the exit status of a function.
But because it is added in so many functions, if we enable it,
the system logs get filled up quickly and cause too much I/O.
So actually no one can open it for a production system or even
for a test.

This patch just try to remove it or change it. So:
1. if all the error paths already use mlog_errno, it is just removed.
   Otherwise, it will be replaced by mlog_errno.
2. if it is used to print some return value, it is replaced with
   mlog(0,...).
mlog_exit_ptr is changed to mlog(0.
All those mlog(0,...) will be replaced with trace events later.

Signed-off-by: Tao Ma <boyu.mt@taobao.com>
2011-03-07 16:43:21 +08:00
Tao Ma
ef6b689b63 ocfs2: Remove ENTRY from masklog.
ENTRY is used to record the entry of a function.
But because it is added in so many functions, if we enable it,
the system logs get filled up quickly and cause too much I/O.
So actually no one can open it for a production system or even
for a test.

So for mlog_entry_void, we just remove it.
for mlog_entry(...), we replace it with mlog(0,...), and they
will be replace by trace event later.

Signed-off-by: Tao Ma <boyu.mt@taobao.com>
2011-02-21 11:10:44 +08:00
Tao Ma
1739da4054 ocfs2: Limit default local alloc size within bitmap range.
In commit 6b82021b9e, we increase
our local alloc size and calculate how much megabytes we can
get according to group size and volume size.
But we also need to check the maximum bits a local alloc block
bitmap can have. With a bs=512, cs=32K, local volume with 160G,
it calculate 96MB while the maximum local alloc size is only
76M. So the bitmap will overflow and corrupt the system truncate
log file. See bug
http://oss.oracle.com/bugzilla/show_bug.cgi?id=1262

Signed-off-by: Tao Ma <tao.ma@oracle.com>
Acked-by: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
2010-06-15 16:50:43 -07:00
Tao Ma
8571882c21 ocfs2: ocfs2_group_bitmap_size has to handle old volume.
ocfs2_group_bitmap_size has to handle the case when the
volume don't have discontiguous block group support. So
pass the feature_incompat in and check it.

Signed-off-by: Tao Ma <tao.ma@oracle.com>
2010-04-13 14:38:06 +08:00
Joel Becker
1ed9b777f7 ocfs2: ocfs2_claim_*() don't need an ocfs2_super argument.
They all take an ocfs2_alloc_context, which has the allocation inode.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Tao Ma <tao.ma@oracle.com>
2010-05-06 13:59:06 +08:00
Joel Becker
4cbe4249d6 ocfs2: Define data structures for discontiguous block groups.
Defines the OCFS2_FEATURE_INCOMPAT_DISCONTIG_BG feature bit and modifies
struct ocfs2_group_desc for the feature.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Tao Ma <tao.ma@oracle.com>
2010-04-13 14:26:12 +08:00
Tao Ma
3e4218df31 ocfs2/trivial: Code cleanup for allocation reservation.
Two tiny cleanup for allocation reservation.
1. Remove some extra codes in ocfs2_local_alloc_find_clear_bits.
2. Remove an unuseful variables in ocfs2_find_resv_lhs.

Signed-off-by: Tao Ma <tao.ma@oracle.com>
Acked-by: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
2010-05-05 18:18:09 -07:00
Mark Fasheh
6b82021b9e ocfs2: increase the default size of local alloc windows
I have observed that the current size of 8M gives us pretty poor
fragmentation on multi-threaded workloads which do lots of writes.

Generally, I can increase the size of local alloc windows and observe a
marked decrease in fragmentation, even up and beyond window sizes of 512
megabytes. This makes sense for a couple reasons - larger local alloc means
more room for reservation windows. On multi-node workloads the larger local
alloc helps as well because we don't have to do window slides as often.

Also, I removed the OCFS2_DEFAULT_LOCAL_ALLOC_SIZE constant as it is no
longer used and the comment above it was out of date.

To test fragmentation, I used a workload which launched 4 threads that did
4k writes into a series of about 140 alternating files.

With resv_level=2, and a 4k/4k file system I observed the following average
fragmentation for various localalloc= parameters:

localalloc=	avg. fragmentation
	8		48
	32		16
	64		10
	120		7

On larger cluster sizes, the difference is more dramatic.

The new default size top out at 256M, which we'll only get for cluster
sizes of 32K and above.

Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
2010-05-05 18:18:07 -07:00
Mark Fasheh
73c8a80003 ocfs2: clean up localalloc mount option size parsing
This patch pulls the local alloc sizing code into localalloc.c and provides
a callout to it from ocfs2_fill_super(). Behavior is essentially unchanged
except that I correctly calculate the maximum local alloc size. The old code
in ocfs2_parse_options() calculated the max size as:

ocfs2_local_alloc_size(sb) * 8

which is correct, in bits. Unfortunately though the option passed in is in
megabytes. Ultimately, this bug made no real difference - the shrink code
would catch a too-large size and bring it down to something reasonable.
Still, it's less than efficient as-is.

Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
2010-05-05 18:18:06 -07:00
Mark Fasheh
a57c8fd2ad ocfs2: remove ocfs2_local_alloc_in_range()
Inodes are always allocated from the global bitmap now so we don't need this
any more. Also, the existing implementation bounces reservations around
needlessly.

Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2010-05-05 18:17:31 -07:00
Mark Fasheh
d02f00cc05 ocfs2: allocation reservations
This patch improves Ocfs2 allocation policy by allowing an inode to
reserve a portion of the local alloc bitmap for itself. The reserved
portion (allocation window) is advisory in that other allocation
windows might steal it if the local alloc bitmap becomes
full. Otherwise, the reservations are honored and guaranteed to be
free. When the local alloc window is moved to a different portion of
the bitmap, existing reservations are discarded.

Reservation windows are represented internally by a red-black
tree. Within that tree, each node represents the reservation window of
one inode. An LRU of active reservations is also maintained. When new
data is written, we allocate it from the inodes window. When all bits
in a window are exhausted, we allocate a new one as close to the
previous one as possible. Should we not find free space, an existing
reservation is pulled off the LRU and cannibalized.

Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2010-05-05 18:17:30 -07:00
Joel Becker
ec20cec7a3 ocfs2: Make ocfs2_journal_dirty() void.
jbd[2]_journal_dirty_metadata() only returns 0.  It's been returning 0
since before the kernel moved to git.  There is no point in checking
this error.

ocfs2_journal_dirty() has been faithfully returning the status since the
beginning.  All over ocfs2, we have blocks of code checking this can't
fail status.  In the past few years, we've tried to avoid adding these
checks, because they are pointless.  But anyone who looks at our code
assumes they are needed.

Finally, ocfs2_journal_dirty() is made a void function.  All error
checking is removed from other files.  We'll BUG_ON() the status of
jbd2_journal_dirty_metadata() just in case they change it someday.  They
won't.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
2010-05-05 18:17:29 -07:00
Mark Fasheh
b4414eea0e ocfs2: Clear undo bits when local alloc is freed
When the local alloc file changes windows, unused bits are freed back to the
global bitmap. By defnition, those bits can not be in use by any file. Also,
the local alloc will never have been able to allocate those bits if they
were part of a previous truncate. Therefore it makes sense that we should
clear unused local alloc bits in the undo buffer so that they can be used
immediatly.

[ Modified to call it ocfs2_release_clusters() -- Joel ]

Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
2010-03-23 18:22:40 -07:00
Mark Fasheh
b22b63ebaf ocfs2: Always try for maximum bits with new local alloc windows
What we were doing before was to ask for the current window size as the
maximum allocation. This had the effect of limiting the amount of allocation
we could get for the local alloc during times when the window size was
shrunk due to fragmentation. In some cases, that could actually *increase*
fragmentation by artificially limiting the number of bits we can accept. So
while we still want to ask for a minimum number of bits equal to window
size, there is no reason why we should limit the number of bits the local
alloc should accept. Hence always allow the maximum number of local alloc
bits.

Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
2010-03-18 13:22:42 -07:00
Tiger Yang
b89c54282d ocfs2: add extent block stealing for ocfs2 v5
This patch add extent block (metadata) stealing mechanism for
extent allocation. This mechanism is same as the inode stealing.
if no room in slot specific extent_alloc, we will try to
allocate extent block from the next slot.

Signed-off-by: Tiger Yang <tiger.yang@oracle.com>
Acked-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
2010-02-26 15:41:07 -08:00
Joel Becker
0cf2f7632b ocfs2: Pass struct ocfs2_caching_info to the journal functions.
The next step in divorcing metadata I/O management from struct inode is
to pass struct ocfs2_caching_info to the journal functions.  Thus the
journal locks a metadata cache with the cache io_lock function.  It also
can compare ci_last_trans and ci_created_trans directly.

This is a large patch because of all the places we change
ocfs2_journal_access..(handle, inode, ...) to
ocfs2_journal_access..(handle, INODE_CACHE(inode), ...).

Signed-off-by: Joel Becker <joel.becker@oracle.com>
2009-09-04 16:07:50 -07:00
Joel Becker
8cb471e8f8 ocfs2: Take the inode out of the metadata read/write paths.
We are really passing the inode into the ocfs2_read/write_blocks()
functions to get at the metadata cache.  This commit passes the cache
directly into the metadata block functions, divorcing them from the
inode.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
2009-09-04 16:07:48 -07:00
Sunil Mushran
59b526a307 ocfs2: Remove debugfs file local_alloc_stats
This patch removes the debugfs file local_alloc_stats as that information
is now included in the fs_state debugfs file.

Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-04-03 11:39:15 -07:00
Joel Becker
13723d00e3 ocfs2: Use metadata-specific ocfs2_journal_access_*() functions.
The per-metadata-type ocfs2_journal_access_*() functions hook up jbd2
commit triggers and allow us to compute metadata ecc right before the
buffers are written out.  This commit provides ecc for inodes, extent
blocks, group descriptors, and quota blocks.  It is not safe to use
extened attributes and metaecc at the same time yet.

The ocfs2_extent_tree and ocfs2_path abstractions in alloc.c both hide
the type of block at their root.  Before, it didn't matter, but now the
root block must use the appropriate ocfs2_journal_access_*() function.
To keep this abstract, the structures now have a pointer to the matching
journal_access function and a wrapper call to call it.

A few places use naked ocfs2_write_block() calls instead of adding the
blocks to the journal.  We make sure to calculate their checksum and ecc
before the write.

Since we pass around the journal_access functions.  Let's typedef them
in ocfs2.h.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05 08:40:32 -08:00
Joel Becker
b657c95c11 ocfs2: Wrap inode block reads in a dedicated function.
The ocfs2 code currently reads inodes off disk with a simple
ocfs2_read_block() call.  Each place that does this has a different set
of sanity checks it performs.  Some check only the signature.  A couple
validate the block number (the block read vs di->i_blkno).  A couple
others check for VALID_FL.  Only one place validates i_fs_generation.  A
couple check nothing.  Even when an error is found, they don't all do
the same thing.

We wrap inode reading into ocfs2_read_inode_block().  This will validate
all the above fields, going readonly if they are invalid (they never
should be).  ocfs2_read_inode_block_full() is provided for the places
that want to pass read_block flags.  Every caller is passing a struct
inode with a valid ip_blkno, so we don't need a separate blkno argument
either.

We will remove the validation checks from the rest of the code in a
later commit, as they are no longer necessary.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05 08:36:52 -08:00
Joel Becker
d4a8c93c82 ocfs2: Make cached block reads the common case.
ocfs2_read_blocks() currently requires the CACHED flag for cached I/O.
However, that's the common case.  Let's flip it around and provide an
IGNORE_CACHE flag for the special users.  This has the added benefit of
cleaning up the code some (ignore_cache takes on its special meaning
earlier in the loop).

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-10-14 11:58:22 -07:00
Joel Becker
0fcaa56a2a ocfs2: Simplify ocfs2_read_block()
More than 30 callers of ocfs2_read_block() pass exactly OCFS2_BH_CACHED.
Only six pass a different flag set.  Rather than have every caller care,
let's make ocfs2_read_block() take no flags and always do a cached read.
The remaining six places can call ocfs2_read_blocks() directly.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-10-14 11:51:57 -07:00
Joel Becker
31d33073ca ocfs2: Require an inode for ocfs2_read_block(s)().
Now that synchronous readers are using ocfs2_read_blocks_sync(), all
callers of ocfs2_read_blocks() are passing an inode.  Use it
unconditionally.  Since it's there, we don't need to pass the
ocfs2_super either.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-10-14 11:43:29 -07:00
Mark Fasheh
a81cb88b64 ocfs2: Don't check for NULL before brelse()
This is pointless as brelse() already does the check.

Signed-off-by: Mark Fasheh
2008-10-13 17:02:44 -07:00
Mark Fasheh
4cc8124584 ocfs2: make la_debug_mutex static
It can also be moved into ocfs2_la_debug_read().

Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-10-13 17:02:44 -07:00
Joel Becker
1187c96885 ocfs2: Limit inode allocation to 32bits.
ocfs2 inode numbers are block numbers.  For any filesystem with less
than 2^32 blocks, this is not a problem.  However, when ocfs2 starts
using JDB2, it will be able to support filesystems with more than 2^32
blocks.  This would result in inode numbers higher than 2^32.

The problem is that stat(2) can't handle those numbers on 32bit
machines.  The simple solution is to have ocfs2 allocate all inodes
below that boundary.

The suballoc code is changed to honor an optional block limit.  Only the
inode suballocator sets that limit - all other allocations stay unlimited.

The biggest trick is to grow the inode suballocator beneath that limit.
There's no point in allocating block groups that are above the limit,
then rejecting their elements later on.  We want to prevent the inode
allocator from ever having block groups above the limit.  This involves
a little gyration with the local alloc code.  If the local alloc window
is above the limit, it signals the caller to try the global bitmap but
does not disable the local alloc file (which can be used for other
allocations).

[ Minor cleanup - removed an ML_NOTICE comment. --Mark ]

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-10-13 16:57:07 -07:00
Mark Fasheh
9a8ff578fb ocfs2: track local alloc state via debugfs
A per-mount debugfs file, "local_alloc" is created which when read will
expose live state of the nodes local alloc file. Performance impact is
minimal, only a bit of memory overhead per mount point. Still, the code is
hidden behind CONFIG_OCFS2_FS_STATS. This feature will help us debug
local alloc performance problems on a live system.

Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-10-13 13:57:58 -07:00
Mark Fasheh
9c7af40b21 ocfs2: throttle back local alloc when low on disk space
Ocfs2's local allocator disables itself for the duration of a mount point
when it has trouble allocating a large enough area from the primary bitmap.
That can cause performance problems, especially for disks which were only
temporarily full or fragmented. This patch allows for the allocator to
shrink it's window first, before being disabled. Later, it can also be
re-enabled so that any performance drop is minimized.

To do this, we allow the value of osb->local_alloc_bits to be shrunk when
needed. The default value is recorded in a mostly read-only variable so that
we can re-initialize when required.

Locking had to be updated so that we could protect changes to
local_alloc_bits. Mostly this involves protecting various local alloc values
with the osb spinlock. A new state is also added, OCFS2_LA_THROTTLED, which
is used when the local allocator is has shrunk, but is not disabled. If the
available space dips below 1 megabyte, the local alloc file is disabled. In
either case, local alloc is re-enabled 30 seconds after the event, or when
an appropriate amount of bits is seen in the primary bitmap.

Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-10-13 13:57:57 -07:00
Mark Fasheh
ebcee4b5c9 ocfs2: Track local alloc bits internally
Do this instead of tracking absolute local alloc size. This avoids
needless re-calculatiion of bits from bytes in localalloc.c. Additionally,
the value is now in a more natural unit for internal file system bitmap
work.

Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-10-13 13:57:57 -07:00
Joel Becker
e407e39783 ocfs2: Fix CONFIG_OCFS2_DEBUG_FS #ifdefs
A couple places use OCFS2_DEBUG_FS where they really mean
CONFIG_OCFS2_DEBUG_FS.

Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
2008-07-14 13:57:15 -07:00
Sunil Mushran
4ba1c5bfd2 ocfs2: Use GFP_NOFS in kmalloc during localalloc window move
kmalloc() during a localalloc window move can trigger the mm to prune
the dcache which inturn can trigger the fs to delete an inode causing
it start a recursive transaction.

The fix also makes the change in kmalloc during localalloc shutdown
just to be safe.

Fixes oss bugzilla#901
http://oss.oracle.com/bugzilla/show_bug.cgi?id=901

Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-04-30 17:09:58 -07:00
Tao Ma
4d0ddb2ce2 ocfs2: Add inode stealing for ocfs2_reserve_new_inode
Inode allocation is modified to look in other nodes allocators during
extreme out of space situations. We retry our own slot when space is freed
back to the global bitmap, or whenever we've allocated more than 1024 inodes
from another slot.

Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-04-18 08:56:10 -07:00
Tao Ma
a4a4891164 ocfs2: Add ac_alloc_slot in ocfs2_alloc_context
In inode stealing, we no longer restrict the allocation to
happen in the local node. So it is neccessary for us to add
a new member in ocfs2_alloc_context to indicate which slot
we are using for allocation. We also modify the process of
local alloc so that this member can be used there also.

Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-04-18 08:56:10 -07:00
Marcin Slusarz
0dd3256e04 [PATCH] ocfs2: le*_add_cpu conversion
replace all:
little_endian_variable = cpu_to_leX(leX_to_cpu(little_endian_variable) +
					expression_in_cpu_byteorder);
with:
	leX_add_cpu(&little_endian_variable, expression_in_cpu_byteorder);
generated with semantic patch

Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2008-03-03 15:50:21 -08:00
Sunil Mushran
7ad8b3d30e ocfs2: Enable localalloc for local mounts
Commit 2fbe8d1ebe disabled localalloc
for local mounts. This caused issues as ocfs2 uses localalloc to
provide write locality. This patch enables localalloc for local mounts.

Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2008-03-03 15:50:21 -08:00
Sunil Mushran
2fbe8d1ebe ocfs2: Local alloc window size changeable via mount option
Local alloc is a performance optimization in ocfs2 in which a node
takes a window of bits from the global bitmap and then uses that for
all small local allocations. This window size is fixed to 8MB currently.
This patch allows users to specify the window size in MB including
disabling it by passing in 0. If the number specified is too large,
the fs will use the default value of 8MB.

mount -o localalloc=X /dev/sdX /mntpoint

Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2008-01-25 15:05:43 -08:00
Mark Fasheh
e63aecb651 ocfs2: Rename ocfs2_meta_[un]lock
Call this the "inode_lock" now, since it covers both data and meta data.
This patch makes no functional changes.

Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2008-01-25 14:46:01 -08:00
Jan Kara
5a58c3ef22 [PATCH] ocfs2: Remove expensive bitmap scanning
Enable expensive bitmap scanning only if DEBUG option is enabled.
The bitmap scanning quite loads the CPU and on my machine the write
throughput of dd if=/dev/zero of=/ocfs2/file bs=1M count=500 conv=sync
improves from 37 MB/s to 45.4 MB/s in local mode...

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2007-11-27 16:47:02 -08:00
Sunil Mushran
bda0233b89 ocfs2: Unlock mutex in local alloc failure case
The fs was not unlocking the local alloc inode mutex in the code path in
which it failed to find a window of free bits in the global bitmap.

Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2007-10-03 11:14:45 -07:00
Mark Fasheh
415cb80037 ocfs2: Allow smaller allocations during large writes
The ocfs2 write code loops through a page much like the block code, except
that ocfs2 allocation units can be any size, including larger than page
size. Typically it's equal to or larger than page size - most kernels run 4k
pages, the minimum ocfs2 allocation (cluster) size.

Some changes introduced during 2.6.23 changed the way writes to pages are
handled, and inadvertantly broke support for > 4k page size. Instead of just
writing one cluster at a time, we now handle the whole page in one pass.

This means that multiple (small) seperate allocations might happen in the
same pass. The allocation code howver typically optimizes by getting the
maximum which was reserved. This triggered a BUG_ON in the extend code where
it'd ask for a single bit (for one part of a > 4k page) and get back more
than it asked for.

Fix this by providing a variant of the high level allocation function which
allows the caller to specify a maximum. The traditional function remains and
just calls the new one with a maximum determined from the initial
reservation.

Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2007-09-20 15:06:09 -07:00
Mark Fasheh
8fccfc829a ocfs2: fix inode leak
We weren't cleaning up our inode reference on error in
ocfs2_reserve_local_alloc_bits(). Add a check for error return and iput() if
need be. Move the code to set the alloc context inode info to the end of the
function so we don't have any possibility of passing back a bad pointer.

Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2007-05-25 11:00:46 -07:00
Robert P. J. Day
cd86128088 [PATCH] Fix numerous kcalloc() calls, convert to kzalloc()
All kcalloc() calls of the form "kcalloc(1,...)" are converted to the
equivalent kzalloc() calls, and a few kcalloc() calls with the incorrect
ordering of the first two arguments are fixed.

Signed-off-by: Robert P. J. Day <rpjday@mindspring.com>
Cc: Jeff Garzik <jeff@garzik.org>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Adam Belay <ambx1@neo.rr.com>
Cc: James Bottomley <James.Bottomley@steeleye.com>
Cc: Greg KH <greg@kroah.com>
Cc: Mark Fasheh <mark.fasheh@oracle.com>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Cc: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-13 09:05:52 -08:00
Mark Fasheh
1fabe1481f ocfs2: Remove struct ocfs2_journal_handle in favor of handle_t
This is mostly a search and replace as ocfs2_journal_handle is now no more
than a container for a handle_t pointer.

ocfs2_commit_trans() becomes very straight forward, and we remove some out
of date comments / code.

Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2006-12-01 18:28:28 -08:00
Mark Fasheh
65eff9ccf8 ocfs2: remove handle argument to ocfs2_start_trans()
All callers either pass in NULL directly, or a local variable that is
already set to NULL.

The internals of ocfs2_start_trans() get a nice cleanup as a result.

Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2006-12-01 18:28:23 -08:00
Mark Fasheh
02dc1af44e ocfs2: pass ocfs2_super * into ocfs2_commit_trans()
This sets us up to remove handle->journal.

Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2006-12-01 18:28:08 -08:00
Mark Fasheh
4bcec1847a ocfs2: remove unused handle argument from ocfs2_meta_lock_full()
Now that this is unused and all callers pass NULL, we can safely remove it.

Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2006-12-01 18:28:05 -08:00
Mark Fasheh
da5cbf2f9d ocfs2: don't use handle for locking in allocation functions
Instead we record our state on the allocation context structure which all
callers already know about and lifetime correctly. This means the
reservation functions don't need a handle passed in any more, and we can
also take it off the alloc context.

Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2006-12-01 18:27:49 -08:00
Mark Fasheh
8898a5a58f ocfs2: don't pass handle to ocfs2_meta_lock() in localalloc.c
Take and drop the locks directly.

Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2006-12-01 18:27:08 -08:00