Commit Graph

19 Commits

Author SHA1 Message Date
Moore, Eric
65207fedcf [SCSI] - fusion - mptfc bug fix's to prevent deadlock situations
mptbase.h

	bump version number to 3.03.09

	remove unneeded flags
	define workq and remove old fc specific locks

mptbase.c

	initialize new lock and don't initialize two removed locks

mptscsih.c

	when firmware reports target is no longer there, return
        DID_REQUEUE for fc hosts so that i/o doesn't get killed until
        the transport has an opportunity to manage the loss via its
        dev loss timer

	when the "eh_abort" routine is called, check to see if the
        driver has the command or not before looking to see if a reset
        is pending.  James Smart and I talked about this and believe
        that the API for this routine is: if driver doesn't have
        command, return SUCCESS.  This change helps prevent a target
        from being taken offline.  SUCCESS is returned because it's
        likely that the command completed after error recovery timed
        it out but before it could be aborted.

	provide a routine to queue work to newly created workq, and
        use it.

	remove "ioc" from mptscsih_abort() it was only used one time.
	the other references were via hd->ioc, so I just moved it....
	net change in references to ioc via hd->ioc is zero

	move hd->resetPending test and hd->timeouts increment to after
	the test for whether the command to be aborted remains known
	to the driver

	Make certain that the workq exists before queuing work to it.

mptfc.c

	no longer need to lock rport data structures as I was able to
	single thread the code!  I fixed up the debug code to
	eliminate compilation messages due to type mismatch in the
	printk.  Got rid of some no longer needed rport flags.
	Initialize and destroy the workq used for the rescan work.

	simplify the logic regarding the increment of
        fc_rescan_work_count.  use post increment and test for zero
        vs. pre increment and test for one; eliminate work_count
        variable: queue_work can be called with the work_lock held as
        it doesn't sleep

Signed-off-by: Michael Reed <mdr@sgi.com>
Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-25 18:07:32 -05:00
Moore, Eric
914c2d8e59 [SCSI] fusion - removing target_id/bus_id from the VirtDevice structure
It makes no sense in keeping the target_id and bus_id
in the VirtDevice structure, when it can be obtained
from the VirtTarget structure.

In addition, this patch fix's couple compilation bugs
in mptfc.c when MPT_DEBUG_FC is enabled. This
provided by Micheal Reed.

Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-14 14:33:38 -06:00
Moore, Eric
3a892bef3f [SCSI] fusion - move some debug firmware event debug msgs to verbose level
Created a debug level MPT_DEBUG_VERBOSE_EVENTS.
Moving some of the more vebose debug messages
for firwmare events into new debug level.  Also
added some more firmware events descriptions.

Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-14 14:27:43 -06:00
Adrian Bunk
03fbcbcd57 [SCSI] drivers/message/fusion/mptfc.c: make 2 functions static
This patch makes two needlessly global functions static.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-27 22:55:06 -06:00
Michael Reed
3bc7bf1d12 [SCSI] fusion: FC rport code fixes
This fix's problems with recent fc submission regarding
i/o being redirected to the wrong target.

Signed-off-by: Michael Reed <mdr@sgi.com>
Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-01-31 14:39:41 -06:00
Moore, Eric
6d5b0c315e [SCSI] fusion - adding support for FC949ES
Add software recognition for the new LSI Logic Fibre Channel controller.

Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-01-14 10:55:04 -06:00
Michael Reed
05e8ec17f4 [SCSI] mptfusion - fc transport attributes
Signed-off-by: Michael Reed <mdr@sgi.com>
Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-01-14 10:55:02 -06:00
Christoph Hellwig
1ca00bb791 [SCSI] fusion: kzalloc / kcalloc conversion
Convert kmalloc + memset to kzalloc or kcalloc in fusion.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-01-14 10:54:58 -06:00
Moore, Eric Dean
c7c82987b4 [SCSI] mptfusion - mapping fixs required support for transport layers.
This utilizes the hostdata area that is hung off of scsi_target and
scsi_device for saving unique firmware mapping. This will be required
for supporting new Fibre and SPI transport support.

This also fixs problems in error handling error code for SAS
controllers, in which the incorrect mapping was passed to the
firmware.

Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-12-13 18:41:15 -07:00
Moore, Eric Dean
7acec1e755 [SCSI] mptfusion - cleaning up xxx_probe error handling
This cleans the returning failure conditions of the
mptsas/mptfc/mptspi probe routines.

Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-12-13 18:38:44 -07:00
Moore, Eric Dean
f78496da6a [SCSI] mptfusion - adding = THIS_MODULE
Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-12-13 18:37:42 -07:00
Moore, Eric Dean
466544d889 [SCSI] fusion SAS support (mptsas driver) updates
Summary of Changes:
* splitting mpt_interrupt per Christophs suggestion
about a month ago
* rename ScsiCfgData to SpiCfgData structure,
then move all the raid related info into
new structure called RaidCfgData.  This is
done because SAS supports RAID, as well as SPI,
so the raid stuff should be seperate.
* incorrect timeout calculation for cntdn
inside WaitForDoorbellAck and WaitForDoortbellInt
* add support for interpreting SAS Log Info
* Increase Event Log Size from 0xA to 0x32
* Fix bug in mptsas/mptfc/mptspi - when controller
has Initiator Mode Disabled, and only running in
TargetMode, the mptctl would panic when loading.
The fix is to return 0, instead of -ENODEV, in
SCSI LLD respective probe routines
* Fix bug in mptlan.c - driver will panic if
there is host reset, due to dev being set to
zero in mpt_lan_ioc_reset
* Fix's for SPI - Echo Buffer
* Several fix's in mptscsih_io_done - FCP Response
info, RESIDUAL_MISMATCH, Data Underrun, etc.
* Cleanup Error Handling - EH handlers,
mptscsih_flush_cmds, and zeroing out ScsiLookup
from mptscsih_qcmd
* Cleanup asyn event handling from
mptscsih -> mptscsih_event_process.  Also
added support for SAS Persistent Table Full,
an asyn event

Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-19 12:45:38 -05:00
Linus Torvalds
2d986010ad Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-for-linus-2.6 2005-07-26 13:28:47 -07:00
Moore, Eric Dean
6e3815ba3a [SCSI] - mptfusion - convert to new change_queue_depth API
Convert driver to use new change_queue_depth API.

Signed-off-by: Eric Moore <Eric.Moore@lsil.com>

Fixed up rejections and
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-01 08:56:31 -05:00
Greg Kroah-Hartman
d18c3db58b [PATCH] PCI: make drivers use the pci shutdown callback instead of the driver core callback.
Now we can change the pci core to always set this pointer, as pci drivers
should use it, not the driver core callback.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-27 21:52:47 -07:00
Christoph Hellwig
12413197ee [SCSI] remove scsi_set_device
scsi_add_host is the proper place to set the device, but people copy
the scsi_set_device usage from older drivers again and again.

note that this leaves some legacy drivers like qlogicisp/qlogicfc
without pci association in sysfs, but they're scheduled to go away soon
anyway.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-06-26 08:31:47 -05:00
Moore, Eric Dean
3fadc59d60 [SCSI] fusion - Adding pci recog support for Fibre 949X and 939X chips
* adding pci id support for new Fibre chips, 949X and 939X
* adding errata workaround - disabling PIO access except during fwdlb.

Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-05-20 15:47:53 -05:00
Moore, Eric Dean
d335cc38c7 [SCSI] mptfusion: fix panic loading driver statically compiled
Adjust link ordering in the Makefile.  Also, the ioc->DoneCtx handles
for mptspi/mptfc in the message frame.  And I'm now not seeing the
panic.

Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-05-20 12:53:42 -05:00
Moore, Eric Dean
2496af3945 [SCSI] mptfusion: mptfc Adding Stub Driver - Fiber Channel
(1) mptfc.c: This driver is having module_init, module_exit, and probe.
(2) mptfc.c: Registering for Fibre Channel pci ids are done from this
module.
(3) mptfc.c: Convert MODULE_PARM to module_param

Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-05-20 12:53:22 -05:00