Commit Graph

378 Commits

Author SHA1 Message Date
Markus Lidel
b2aaee33fb [PATCH] I2O: Adaptec specific SG_IO access, firmware access through sysfs and 2400A workaround
Changes:
 - Provide SG_IO access to BLOCK and EXECUTIVE class on Adaptec
   controllers
 - Use PRIVATE messages in SCSI-OSM because on some controllers normal
   SCSI class commands like READ or READ CAPACITY cause errors
 - Use new DMA and SG list creation function
 - Added workaround to limit sectors per request for Adaptec 2400A
   controllers

Signed-off-by: Markus Lidel <Markus.Lidel@shadowconnect.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-24 00:05:28 -07:00
Markus Lidel
f10378fff6 [PATCH] I2O: new sysfs attributes and Adaptec specific block device access and 64-bit DMA support
Changes:
 - Added Bus-OSM which could be used by user space programs to reset a
   channel on the controller
 - Make ioctl's in Config-OSM obsolete in prefer for sysfs attributes and
   move those to its own file
 - Added sysfs attribute for firmware read and write access for I2O
   controllers
 - Added special handling of firmware read and write access for Adaptec
   controllers
 - Added vendor id and product id as sysfs-attribute to Executive classes
 - Added automatic notification of LCT change handling to Exec-OSM
 - Added flushing function to Block-OSM for later barrier implementation
 - Use PRIVATE messages for Block access on Adaptec controllers, which are
   faster then BLOCK class access
 - Cleaned up support for Promise controller
 - New messages are now detected using the IRQ status register as
   suggested by the I2O spec
 - Added i2o_dma_high() and i2o_dma_low() functions
 - Added facility for SG tablesize calculation when using 32-bit and
   64-bit DMA addresses
 - Added i2o_dma_map_single() and i2o_dma_map_sg() which could build the
   SG list for 32-bit as well as 64-bit DMA addresses

Signed-off-by: Markus Lidel <Markus.Lidel@shadowconnect.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-24 00:05:28 -07:00
Markus Lidel
f88e119c4b [PATCH] I2O: first code cleanup of spare warnings and unused functions
Changes:

 - Removed unnecessary checking of NULL before calling kfree()
 - Make some functions static
 - Changed pr_debug() into osm_debug()
 - Use i2o_msg_in_to_virt() for getting a pointer to the message frame
 - Cleaned up some comments
 - Changed some le32_to_cpu() into readl() where necessary
 - Make error messages of OSM's look the same
 - Cleaned up error handling in i2o_block_end_request()
 - Removed unused error handling of failed messages in Block-OSM, which
   are not allowed by the I2O spec
 - Corrected the blocksize detection in i2o_block
 - Added hrt and lct sysfs-attribute to controller
 - Call done() function in SCSI-OSM after freeing DMA buffers
 - Removed unneeded variable for message size calculation in
   i2o_scsi_queuecommand()
 - Make some changes to remove sparse warnings
 - Reordered some functions
 - Cleaned up controller initialization
 - Replaced some magic numbers by defines
 - Removed unnecessary dma_sync_single_for_cpu() call on coherent DMA
 - Removed some unused fields in i2o_controller and removed some unused
   functions

Signed-off-by: Markus Lidel <Markus.Lidel@shadowconnect.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-24 00:05:28 -07:00
Markus Lidel
61fbfa8129 [PATCH] I2O: bugfixes and compability enhancements
Changes:

 - Fixed sysfs bug where user and parent links where added to the I2O
   device itself
 - Fixed bug when calculating TID for the event handler and cleaned up the
   workflow of i2o_driver_dispatch()
 - Fixed oops when no I2O device could be found for an event delivered to
   Exec-OSM
 - Fixed initialization of spinlock in Exec-OSM
 - Fixed memory leak in i2o_cfg_passthru() and i2o_cfg_passthru()
 - Removed MTRR support
 - Added PCI ID of Promise SX6000 with firmware >= 1.20.x.x
 - Turn of caching for ioremapped memory of in_queue
 - Added initialization sequence for Promise controllers
 - Moved definition of u8 / u16 / u32 for raidutils before first use

Signed-off-by: Markus Lidel <Markus.Lidel@shadowconnect.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-24 00:05:28 -07:00
Yani Ioannou
e404e274f6 [PATCH] Driver Core: drivers/i2c/chips/w83781d.c - drivers/s390/block/dcssblk.c: update device attribute callbacks
Signed-off-by: Yani Ioannou <yani.ioannou@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-20 15:15:34 -07:00
James Bottomley
3237ee78fc merge by hand (fix up qla_os.c merge error) 2005-06-17 18:42:23 -05:00
Jeff Garzik
df0ae2497d [SCSI] allow sleeping in ->eh_host_reset_handler()
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-06-17 12:05:18 -05:00
Jeff Garzik
68b3aa7c98 [SCSI] allow sleeping in ->eh_bus_reset_handler()
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-06-17 12:05:10 -05:00
Jeff Garzik
94d0e7b805 [SCSI] allow sleeping in ->eh_device_reset_handler()
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-06-17 12:05:03 -05:00
Jeff Garzik
8fa728a268 [SCSI] allow sleeping in ->eh_abort_handler()
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-06-17 12:04:55 -05:00
Markus Lidel
223230e789 [PATCH] i2o: Fix free of event memory in i2o_block_event()
Fixed freeing of event memory in i2o_block_event()

Signed-off-by: Markus Lidel <Markus.Lidel@shadowconnect.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-14 07:19:35 -07:00
Moore, Eric Dean
7e8a226147 [SCSI] fusion - bump driver version to 3.03.02
Bump driver version to 3.03.02

Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-05-20 15:47:58 -05:00
Moore, Eric Dean
c1a71d1c04 [SCSI] fusion - mpi headers version 1.5.9
This patch contains update for mpi headers 1.5.9.

Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-05-20 15:47:57 -05:00
Moore, Eric Dean
51bbc9c3e8 [SCSI] fusion-kconfig-cleanup
* This patch clarifies help section in FUSION_MAX_SGE entry.

Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-05-20 15:47:55 -05:00
Moore, Eric Dean
d485eb8305 [SCSI] fusion-kfree-cleanup
This patch is originally From: Jesper Juhl <juhl-lkml@dif.dk>

This patch gets rid of redundant NULL checks prior to calling kfree() in
drivers/message/* There are also a few small whitespace changes in there.

Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-05-20 15:47:54 -05:00
Moore, Eric Dean
3fadc59d60 [SCSI] fusion - Adding pci recog support for Fibre 949X and 939X chips
* adding pci id support for new Fibre chips, 949X and 939X
* adding errata workaround - disabling PIO access except during fwdlb.

Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-05-20 15:47:53 -05:00
Moore, Eric Dean
d335cc38c7 [SCSI] mptfusion: fix panic loading driver statically compiled
Adjust link ordering in the Makefile.  Also, the ioc->DoneCtx handles
for mptspi/mptfc in the message frame.  And I'm now not seeing the
panic.

Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-05-20 12:53:42 -05:00
James Bottomley
b86fff7368 [SCSI] mptfusion: correct Kconfig problem
The fusion Kconfig forgets to set CONFIG_FUSION, which is required to
get the upper makefile to descend into the fusion directory.  Add this
back as a variable and make the two upper level modules select it.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-05-20 12:53:23 -05:00
Moore, Eric Dean
2496af3945 [SCSI] mptfusion: mptfc Adding Stub Driver - Fiber Channel
(1) mptfc.c: This driver is having module_init, module_exit, and probe.
(2) mptfc.c: Registering for Fibre Channel pci ids are done from this
module.
(3) mptfc.c: Convert MODULE_PARM to module_param

Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-05-20 12:53:22 -05:00
Moore, Eric Dean
243eabcf6b [SCSI] mptfusion: mptspi Adding Stub Driver - SCSI Parallel
(1) mptspi.c: This driver is having module_init, module_exit, and probe.
(2) mptspi.c: Registering for SCSI pci ids are done from this module.
(3) mptspi.c: Convert MODULE_PARM to module_param

Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-05-20 12:53:21 -05:00
Moore, Eric Dean
0d0c79747e [SCSI] mptfusion: mptscsih Split driver support
(1) mptscsih.c: Remove credits, -sralston references , update copyright 
(2) mptscsih.c: split driver support
(3) mptscsih.c: module_init, module_exit, and probe routines moved to new 
stub drivers, mptfc and mptspi
(4) mptscsih.c: some global parameters are moved to MPT_SCSI_HOST
(5) mptscsih.c: removed scsi_device_online check.

Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-05-20 12:53:20 -05:00
Moore, Eric Dean
748b77b190 [SCSI] mptfusion: mptlan Remove credits and update copyright
(1) mptlan.c: Remove credits and update copyright
(2) mptlan.c: Remove -sralston references

Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-05-20 12:53:19 -05:00
Moore, Eric Dean
b6fe4ddcf7 [SCSI] mptfusion: mptctl Remove credits and update copyright
(1) mptctl.c: Remove credits and update copyright
(2) mptctl.c: cleanup in get_iocinfo

Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-05-20 12:53:18 -05:00
Moore, Eric Dean
7fadc87e5c [SCSI] mptfusion: mptbase cleanup, split driver support, DMA 32_BIT_MASK
(1) mptbase.c: Move registering pci ids to scsi lld drivers 
(2) mptbase.c: Use the DMA_32BIT_MASK constant
(3) mptbase.c: Fix for multiple pci domains
(4) mptbase.c: Remove le32 conversion from BlockSize, which was u8 size
(5) mptbase.c: Remove credits, -sralston references , update copyright
(6) mptbase.c: split driver support

Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-05-20 12:53:17 -05:00
Moore, Eric Dean
5f5affddad [SCSI] mptfusion: Kconfig Adding new bus type drivers for fusion drivers.
(1) Kconfig - added new mptspi and mptfc scsi lld drivers
(2) Kconfig - increased MAX_SGE from 40 to 128 
(2) Makefile - compilation support for split drivers
(3) Makefile - cleaned up debug defines; e.g. removed obsolete, added others

Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-05-20 12:53:16 -05:00
f4c2c15b93 [PATCH] Convert i2o to compat_ioctl
Also broken design in its compat handlers - CONFIG_COMPAT doesn't 
mean that there should be no native ioctls.

Signed-off-by: Andi Kleen <ak@muc.de>

Reworked with comments from Markus Lidel by:
Christoph Hellwig <hch@infradead.org>

Rejections fixed and
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-04-18 12:34:15 -05:00
Pavel Machek
8d189f7298 [PATCH] fix u32 vs. pm_message_t in drivers/message
This fixes u32 vs. pm_message_t in drivers/message.

Signed-off-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 15:25:28 -07:00
Linus Torvalds
1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00