The return status of wl_ucode_init_buf() is now being used. Also a bug in
firmware validation, which could lead to incompatible firmware not being
rejected by the driver, has been fixed. Comment from Dan Carpenter on using
negative error values has been incorporated in this commit.
Signed-off-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
If there is a problem with the firmware load (eg, firmware not present in
/lib/firmware/brcm), then the driver would dump its stack instead of bailing
out gracefully. Root cause was an uninitialized variable (wl->pub) being
dereferenced in the rfkill portion of a cleanup routine (wl_remove). Fix was
to move the rfkill calls into the correct spot in wl_remove().
Signed-off-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Upon firmware load failure, wl_release_fw() was called multiple
times. This caused the driver to oops. Solution was to remove redundant
wl_release_fw() calls.
Signed-off-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Use native linux memcpy instead of legacy bcopy
Signed-off-by: Stanislav Fomichev <kernel@fomichev.me>
Reviewed-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Code cleanup. Removed more defines, data structures and functions that were
unused because this driver supports mac core rev 22 and up. Got rid of redundant
brackets in wlc_bmac_txstatus() by moving locally defined variables above {}
scope.
Signed-off-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Reviewed-by: Brett Rudley <brudley@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Code cleanup. Only mac core revisions 22 and higher are supported, therefore
comment related to older mac revisions was removed.
Signed-off-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Reviewed-by: Brett Rudley <brudley@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Code cleanup. Removed code that was never invoked because the mac core
revision supported is always higher than 22.
Signed-off-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Reviewed-by: Brett Rudley <brudley@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The constant array declaration aci_names is not referenced
anywhere in the code so it has been removed.
Reviewed-by: Brett Rudley <brudley@broadcom.com>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Under error condition debug functions are being called which
only have implementation when BCMDBG is defined. This result
in #ifdef BCMDBG blocks in functions. This patch fixes this by
mapping the debug functions to empty macro when BCMDBG is not
defined. This makes the calling function easier to read.
Reviewed-by: Brett Rudley <brudley@broadcom.com>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
During rfkill implementation the content of wlc_radio_upd function
was removed for testing purposes only. This ended up in the patch
sent out. This commit restores the function content, which was the
only function calling static function wlc_radio_enable. This removes
the compilation warning observed.
Reviewed-by: Brett Rudley <brudley@broadcom.com>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
memset prototype specifies a void pointer as buffer. Conversion from
any pointer type to void pointer does not require an explicit cast.
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Brett Rudley <brudley@broadcom.com>
Reviewed-by: Henry Ptasinski <henryp@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
When mac80211 informs about new BSSID this was configured toward
the hardware device, but the information is also needed inside
the driver itself. This patch takes care of that.
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Brett Rudley <brudley@broadcom.com>
Reviewed-by: Henry Ptasinski <henryp@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Driver now follows beacon interval as set by mac80211 callback.
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Brett Rudley <brudley@broadcom.com>
Reviewed-by: Henry Ptasinski <henryp@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The HT operation mode is provided by mac80211 and they are now
stored in the driver.
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Brett Rudley <brudley@broadcom.com>
Reviewed-by: Henry Ptasinski <henryp@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The driver has flags for association state which are now being set
according to notification from mac80211.
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Brett Rudley <brudley@broadcom.com>
Reviewed-by: Henry Ptasinski <henryp@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The implementation for bss_info_changed was not handling all
changes as provided by mac80211 module. These have been added
and will log message with changed parameters.
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Brett Rudley <brudley@broadcom.com>
Reviewed-by: Henry Ptasinski <henryp@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The 802.11 core in the chipsets provides counters that are now
used to provide counter values to mac80211 through get_stats
callback. Counters related to ampdu and wmm (aka. wme) are not
yet incorporated.
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Brett Rudley <brudley@broadcom.com>
Reviewed-by: Henry Ptasinski <henryp@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Allocation of buffer in function wl_ucode_init_buf can fail. This was
signalled by an error message, but code continued to access the null
pointer. This is now avoided by jumping to failure label.
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Brett Rudley <brudley@broadcom.com>
Reviewed-by: Henry Ptasinski <henryp@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The driver contained several calls to printf which was mapped
to printk using a macro. These have been changed to explicit
call to printk or use an appropropriate macro.
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Brett Rudley <brudley@broadcom.com>
Reviewed-by: Henry Ptasinski <henryp@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
When mac80211 attempts to configure the driver for 40MHz channel it
will return an error code -EIO as this is not yet supported.
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Brett Rudley <brudley@broadcom.com>
Reviewed-by: Henry Ptasinski <henryp@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Non-error messages which were printed using WL_ERROR macro
were decreased to WL_NONE (which is a no_printk) or WL_TRACE
level macros. mac80211 callbacks that are not handled by the
driver are printed with WL_ERROR.
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Brett Rudley <brudley@broadcom.com>
Reviewed-by: Henry Ptasinski <henryp@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Most mac80211 callbacks were named using prefix 'wl_ops' except
for a few. These have been aligned to use the prefix as well.
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Brett Rudley <brudley@broadcom.com>
Reviewed-by: Henry Ptasinski <henryp@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is to resolve a merge conflict with:
drivers/staging/zram/zram_drv.c
as pointed out by Stephen Rothwell
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Robert Jennings <rcj@linux.vnet.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
These changes are fixing some build problem I had when compiling
without BCMDBG being set.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
adds implementation for allowing configuration of dot11RTSThreshold
as defined in the 802.11 standards. The mac80211 module will use
callback set_rts_threshold to configure this in the driver.
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Brett Rudley <brudley@broadcom.com>
Reviewed-by: Henry Ptasinski <henryp@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
removed the message from the driver to avoid polluting the kernel
log with messages indicating nothing is wrong.
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Remove differences in util sources for the two supported drivers.
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch allows to build both drivers. Previous patch for this
failed using -j option. This has been fixed by adding files with
include statement for the fullmac driver. Verified this is working
using -j4 option.
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Since 2.6.38-rc1 we are getting a compiler warning due to
changed API in net/cfg80211.h. This change fixes the warning
but driver will need to be modified later to handle the
additional parameters.
Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Roland Vossen <rvossen@broadcom.com>
Cc: Dowan Kim <dowan@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The below patch fixes a typo comamnd to command.
Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Since two preprocessor defines are always '1', could remove code that was
never compiled in and removed references to these preprocessor defines
(DMA64_ENAB and DMA64_MODE).
Signed-off-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
removed C code and that was never invoked, and declarations that are not used
anymore.
Signed-off-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Resubmitted the patch to align with staging-next tree. This change
depends on suspend/resume patch as sent on Wed, Jan 12, 2011.
Only hardware switch state needs to be handled by driver. RFKILL is
informed when hardware switch is activated. MAC80211 rfkill_poll
callback is used to check hardware switch deactivation.
Reviewed-by: Brett Rudley <brudley@broadcom.com>
Reviewed-by: Henry Ptasinski <henryp@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Solved a locking issue that resulted in driver crashes with the 43224 and 43225
chips. The problem has been reported on several fora. Root cause was two fold:
hardware was being manipulated by two unsynchronized threads, and a scan
operation could interfere with an ongoing dynamic calibration process. Fix was
to invoke a lock on wl_ops_config() operation and to set internal flags when a
scan operation is started and stopped.
Please add this to the staging-linus branch.
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Roland Vossen <rvossen@broadcom.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This was done to resolve conflicts in the following files due
to patches in Linus's tree and in the staging-next tree:
drivers/staging/brcm80211/brcmsmac/wl_mac80211.c
drivers/staging/ste_rmi4/synaptics_i2c_rmi4.c
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch removes explicit unlikely() when using BUG_ON() in
wl_cfg80211.c
Signed-off-by: Coly Li <bosong.ly@taobao.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This reverts commit ead1256410 as it
broke the build when building with multiple threads at the same time.
Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Roland Vossen <rvossen@broadcom.com>
Cc: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Common code for brcm80211 drivers was resulting in different compiled
object files for the drivers due to compilation flags. This has been
aligned so that they are resulting in same object files. Kconfig now
allows both drivers to be build simultaneously.
Reviewed-by: Brett Rudley <brudley@broadcom.com>
Reviewed-by: Henry Ptasinski <henryp@broadcom.com>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
PCI PM suspend callback took down the interface and resume brought
it back up. In the mac80211 context this is done in subsequent calls.
Rework implementation so that suspend only stores config, and sets
PCI power state. The resume return to full power state (D0), restores
the config, and brings hardware back up. Full bringup is done by
subsequent mac80211 calls.
Reviewed-by: Brett Rudley <brudley@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The driver assumed it would receive skb packets from MAC80211 which
are not cloned. To guard this assumption an assert was placed in
the transmit routine. As of kernel 2.6.37 it turns out MAC80211 does
pass skb packets that are cloned. The assert is also not needed as
it does not lead to a failure state in our driver when the packet is
cloned. Therefore the assert can safely be removed.
> commit f8a0a78148
> Author: Felix Fietkau <nbd@openwrt.org>
> Date: Sat Dec 18 19:30:50 2010 +0100
>
> mac80211: fix potentially redundant skb data copying
>
> When an skb is shared, it needs to be duplicated, along with its data
> If the skb does not have enough headroom, using skb_copy might cause t
> buffer to be copied twice (once by skb_copy and once by pskb_expand_he
> Fix this by using skb_clone initially and letting ieee80211_skb_resize
> out the rest.
>
> Signed-off-by: Felix Fietkau <nbd@openwrt.org>
> Signed-off-by: John W. Linville <linville@tuxdriver.com>
>
Acked-by: Brett Rudley <brudley@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Use -E... instead of just E... in a few places where negative error
codes are expected by a functions callers. These were found by grepping
with coccinelle & then inspecting by hand to determine which were bugs.
The staging/cxt1e1 driver appears to intentionally use positive E...
error codes in some places, and negative -E... error codes in others,
making it hard to know which is intended where - very likely I missed
some problems in that driver.
Signed-off-by: Ralph Loader <suckfish@ihug.co.nz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Quite some definitions are not referenced in the drivers sources and
clutter up the files so they are removed.
Reviewed-by: Brett Rudley <brudley@broadcom.com>
Reviewed-by: Henry Ptasinski <henryp@broadcom.com>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Working through a list of unused functions in the driver tree.
This file has following redundant function(s):
wlc_stf_stbc_rx_get
wlc_stf_rxchain_set
Reviewed-by: Brett Rudley <brudley@broadcom.com>
Reviewed-by: Henry Ptasinski <henryp@broadcom.com>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This file defined an inline function pkt_txh_seqnum() which was not
used and as such is removed.
Reviewed-by: Brett Rudley <brudley@broadcom.com>
Reviewed-by: Henry Ptasinski <henryp@broadcom.com>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Working through a list of unused functions in the driver tree.
This file has following redundant function(s):
wlc_eventq_next
wlc_eventq_cnt
Reviewed-by: Brett Rudley <brudley@broadcom.com>
Reviewed-by: Henry Ptasinski <henryp@broadcom.com>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Working through a list of unused functions in the driver tree.
This file has following redundant function(s):
wlc_channel_country_abbrev
wlc_channel_locale_flags
wlc_channel_get_chanvec
wlc_valid_40chanspec_in_band
wlc_channel_set_txpower_limit
wlc_valid_chanspec
Reviewed-by: Brett Rudley <brudley@broadcom.com>
Reviewed-by: Henry Ptasinski <henryp@broadcom.com>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Working through a list of unused functions in the driver tree.
This file has following redundant function(s):
wlc_bmac_set_hw_etheraddr
wlc_cur_phy
wlc_bmac_revinfo_get
wlc_bmac_set_deaf
wlc_bmac_xmtfifo_sz_set
wlc_bmac_ifsctl_edcrs_set
wlc_bmac_set_ucode_loaded
wlc_bmac_set_clk
wlc_gpio_fast_deinit
wlc_bmac_radio_hw
wlc_bmac_set_txpwr_percent
Reviewed-by: Brett Rudley <brudley@broadcom.com>
Reviewed-by: Henry Ptasinski <henryp@broadcom.com>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
