Commit Graph

184950 Commits

Author SHA1 Message Date
Krishna Gudipati
0a4b1fc0b2 [SCSI] bfa: Replace bfa_get_attr() with specific APIs
bfa_ioc_attr_s is a big structure and some times could cause
stack overflow if defined locally, so add specific APIs that
are needed to replace the use of ioc_attr local var.

Signed-off-by: Krishna Gudipati <kgudipat@brocade.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-03-07 13:07:00 +05:30
Krishna Gudipati
f58e9ebbf7 [SCSI] bfa: New portlog entries for events (FIP/FLOGI/FDISC/LOGO).
Signed-off-by: Krishna Gudipati <kgudipat@brocade.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-03-07 13:06:36 +05:30
Krishna Gudipati
1c8a4c3749 [SCSI] bfa: Rename pport to fcport in BFA FCS.
Rename pport structures to fcport in BFA FCS, to resolve confusion
about the port structures in the firmware, and make sure the SG page
is setup correctly.

Signed-off-by: Krishna Gudipati <kgudipat@brocade.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-03-07 13:05:10 +05:30
Krishna Gudipati
13cc20c5e7 [SCSI] bfa: IOC fixes, check for IOC down condition.
Currently BFA was not checking for IOC down condition when issuing
getstats/clearstats

Add check to see if IOC is operational, before issuing
getstats/clearstats.

Signed-off-by: Krishna Gudipati <kgudipat@brocade.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-03-07 13:03:50 +05:30
Krishna Gudipati
78f915f7b0 [SCSI] bfa: In MSIX mode, ignore spurious RME interrupts when FCoE ports are in FW mismatch state.
Use dummy interrupt handlers till chip initialization is complete.
Install real interrupt handlers after chip initialization.

Also removed msix installation code in bfa_iocfc_init().

Signed-off-by: Krishna Gudipati <kgudipat@brocade.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-03-07 13:02:45 +05:30
Krishna Gudipati
f5713c5dfb [SCSI] bfa: Fix Command Queue (CPE) full condition check and ack CPE interrupt.
Fixed the issue of not acknowledging the command queue
full-to-non-full interrupt.  Implemented separate acknowledging
functions for different ASIC and interrupt mode.

Fixed the case of missing CPE interrupt by always processing the
pending requests in the completion path.

Signed-off-by: Krishna Gudipati <kgudipat@brocade.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-03-07 13:02:14 +05:30
Krishna Gudipati
816e49b8ed [SCSI] bfa: IOC recovery fix in fcmode.
ioc_recover failed to work in fcmode.

Fixed the code to initialize the ioc_regs.err_set during the
notify_hbfail.

Signed-off-by: Krishna Gudipati <kgudipat@brocade.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-03-07 13:01:42 +05:30
Krishna Gudipati
2993cc71d1 [SCSI] bfa: AEN and byte alignment fixes.
Replace enum types with int and rearrange the fields to fix some
alignment issue.

Local var ioc_attr is causing the stack to overflow, so removed the
usage of the local ioc_attr var and now invoking an API to return the
ioc_type.

Fix some AEN issues.

Signed-off-by: Krishna Gudipati <kgudipat@brocade.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-03-07 13:01:23 +05:30
Krishna Gudipati
9693e7dff5 [SCSI] bfa: Introduce a link notification state machine.
Introduce a link notification state machine to handle next incoming
link events while the current event is being delivered to the driver.

When the event has been processed by the driver, the link notification
state machine will queue the next event (if there is any) to the
driver.

Signed-off-by: Krishna Gudipati <kgudipat@brocade.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-03-07 12:59:36 +05:30
Krishna Gudipati
738c9e66dc [SCSI] bfa: Added firmware save clear feature for BFA driver.
Signed-off-by: Krishna Gudipati <kgudipat@brocade.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-03-07 12:58:59 +05:30
Krishna Gudipati
f926a05f5c [SCSI] bfa: FCS authentication related changes.
Made FCS authentication related changes to state machines and header
files.

Made changes in FCS state machines to handle the case when secret
string is NULL.

Signed-off-by: Krishna Gudipati <kgudipat@brocade.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-03-07 12:58:41 +05:30
Krishna Gudipati
7af074dc9d [SCSI] bfa: PCI VPD, FIP and include file changes.
Changed PCI VPD to incorporate specific OEM vendors.

Added FCoE specific interrupt latency and delay params.

Added some variables needed by FIP 2.0.

Added some new logging and tracing definitions.

Added reserved members to make the structures (IOC, IOCFC) 64bit aligned.

Changed the module identifiers, as some files were moved.

Signed-off-by: Krishna Gudipati <kgudipat@brocade.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-03-07 12:57:35 +05:30
Krishna Gudipati
86e32dabba [SCSI] bfa: Fix to copy fpma MAC when requested by user space application.
Copy fpma MAC when requested by user space application.  Added FPMA
mac address to the lport attributes structure.

Signed-off-by: Krishna Gudipati <kgudipat@brocade.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-03-07 12:57:05 +05:30
Krishna Gudipati
72041ed8fc [SCSI] bfa: RPORT state machine: direct attach mode fix.
Make sure that in direct attach mode, we do not query the name server
after a target is marked offline.

Signed-off-by: Krishna Gudipati <kgudipat@brocade.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-03-07 12:54:38 +05:30
Krishna Gudipati
e641de37e6 [SCSI] bfa: Replace bfa_assert() with bfa_sm_fault()
Replace bfa_assert() with bfa_sm_fault() to get unhandled events for
debugging.

Signed-off-by: Krishna Gudipati <kgudipat@brocade.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-03-07 12:54:18 +05:30
Krishna Gudipati
8b651b4294 [SCSI] bfa: Clear LL_HALT and PSS_ERR bit when IOC crashes.
Clear LL_HALT and PSS_ERR bit in the interrupt status register on an IOC crash.

Signed-off-by: Krishna Gudipati <kgudipat@brocade.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-03-07 12:53:53 +05:30
Krishna Gudipati
0a20de446c [SCSI] bfa: IOC changes: Support faster recovery and split bfa_ioc.c into ASIC specific code.
Add support for faster IOC recovery after failure.

Split bfa_ioc.c into three files:
  bfa_ioc.c:    Common code shared between crossbow and catapult ASIC's.

  bfa_ioc_cb.c: Code specific to the crossbow, reg mapping and
                interrupt related routines.

  bfa_ioc_ct.c: Code specific to the catapult, reg mapping and
                interrupt related routines.

Fix to make sure IOC reinitialize's properly on enable request -
update the ioc_fwstate reg with BFI_IOC_FAIL on ioc disable mbox cmd
timeout.

Makefile changes to support the 2 newly added files bfa_ioc_cb.c and
bfa_ioc_ct.c.

Signed-off-by: Krishna Gudipati <kgudipat@brocade.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-03-07 12:49:48 +05:30
Krishna Gudipati
e67143243a [SCSI] bfa: Resume BFA operations after firmware mismatch is resolved.
bfad.c & bfad_drv.h:
  * Created a kernel thread from pci_probe that does the bfad start
    operations after BFA init done on a firmware mismatch.
  * The kernel thread on a fw mismatch waits for an event from IOC
    call back and is woken up from bfa_cb_init() on BFA init success.
  * In normal cases of no firmware mismatch this thread is terminated
    in pci_probe.

bfa_fcs_lport.c, fabric.c, fcs_lport.h & vport.c:
  * Split the lport init to attach time and init time code, so that
    proper config attributes are set after firmware mismatch.

bfa_iocfc.c:
  * Handle an IOC timer issue, where the IOC timer would expire before
    the init completion and send Init fail event to the driver,
    however IOC init continues and completes successfully at the later
    stage. The bfa and driver were not handling this kind of deferred
    init completion.

Signed-off-by: Krishna Gudipati <kgudipat@brocade.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-03-04 16:17:02 +05:30
Krishna Gudipati
a046bf0559 [SCSI] bfa: Fix to allow creation of only 190 vports on CNA.
Brocade CNA currently supports only 190 vports (instead of 191),
since there are only 192 unicast cam entries reserved for FCoE.

Brocade CNA has a total of 256 unicast cam entries (192 FCoE + 64 LL)

192 cam entries = 1 burned in mac + 1 baseport FPMA mac + 190 vport
FPMA macs.

Made changes to the code to support only 190 vports.

Signed-off-by: Krishna Gudipati <kgudipat@brocade.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-03-04 16:15:24 +05:30
Krishna Gudipati
82794a2e41 [SCSI] bfa: New interface to handle firmware upgrade scenario
Split bfa_fcs_init() into bfa_fcs_attach() and bfa_fcs_init().

Removed empty function definitions in FCS modules

Modified driver to call bfa_fcs_attach() and bfa_fcs_init() as needed.

Signed-off-by: Krishna Gudipati <kgudipat@brocade.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-03-04 16:14:10 +05:30
Krishna Gudipati
5b098082e2 [SCSI] bfa: Changes to support FDMI Driver Parameter
Added a FCS function to be called during driver init, to set the FDMI
 Driver parameter.

fdmi.c: Created a disabled state when fdmi is disabled.

bfad.c:
  * Added fdmi_enable driver parameter.
  * Added support to call bfa_fcs_set_fdmi_param() to initialize fcs
    fdmi setting.

Signed-off-by: Krishna Gudipati <kgudipat@brocade.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-03-04 16:13:40 +05:30
Krishna Gudipati
ab5336189a [SCSI] bfa: Enable new halt interrupt in BFA.
bfa_intr.c:  Enable new halt interrupt in BFA.
bfi_ctreg.h: Expose new halt interrupt bit definition to host.

Signed-off-by: Krishna Gudipati <kgudipat@brocade.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-03-04 16:12:58 +05:30
Krishna Gudipati
2f9b8857a9 [SCSI] bfa: Enable IOC auto-recovery and IOC type fix.
bfa_ioc.c:
  - Enable IOC auto-recovery by default.
  - When CNA is in FC mode, return IOC type as FC (not FCoE)

bfa_iocfc.c:
  - Set fcmode before pci initialization/setup.

Signed-off-by: Krishna Gudipati <kgudipat@brocade.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-03-04 16:10:02 +05:30
Krishna Gudipati
5c1fb1d556 [SCSI] bfa: Defined a new LPS event to clear virtual link on a vport
Clear virtual links was not propagated upwards to bfa from fw.
This resulted in HBA and switch being in an inconsistent state.

So defined a new LPS event for clear virtual link on a vport,
and also now clear virtual link on a baseport, is sent as a
link down event from the fw.

Signed-off-by: Krishna Gudipati <kgudipat@brocade.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-03-04 16:09:37 +05:30
Krishna Gudipati
4c147dd819 [SCSI] bfa: Added separate MSI-X module parameters.
Added separate MSI-X module parameters to selectively
enable / disable MSI-X interrupts for both Brocade HBA and CNA's.

Signed-off-by: Krishna Gudipati <kgudipat@brocade.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-03-04 15:29:46 +05:30
James Bottomley
fac829fdca [SCSI] raid_attrs: fix dependency problems
RAID attributes uses scsi_is_sdev_device() to gate some SCSI specific
checking code.  This causes two problems.  Firstly if SCSI == n just
defining scsi_is_sdev_device() to return false might not be enough to
prevent gcc from emitting the code (and thus referring to undefined
symbols), so this needs surrounding with an ifdef.  Secondly, using
scsi_is_sdev_device() when SCSI is either y or m gives a subtle
problem in the m case: raid_attrs must also be m to use the symbol.
Do the usual Kconfig jiggery-pokery to fix this.

Reported-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-03-03 21:17:06 +05:30
Boaz Harrosh
98e1e0f07c [SCSI] libosd: Fix unchecked err return found by smatch
Doing CHECK="smatch --two-passes gives:
drivers/scsi/osd/osd_initiator.c +1435 osd_finalize_request warning: assignment to 'ret' was never used

Which is an unchecked possible allocation failure, Fixed.

Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-03-03 21:12:21 +05:30
Martin K. Petersen
bb2d3de188 [SCSI] sd: Fix VPD buffer allocations
Commit e3deec09 incorrectly assumed that the B0 and B1 page lengths were
limited to 32 bytes.  The B0 VPD page length is defined to be 64 bytes
when the device supports thin provisioning.  B1 is always defined to be
64 bytes.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-03-03 19:13:16 +05:30
James Smart
74315ad00b [SCSI] lpfc 8.3.10: Update Driver version to 8.3.10
Signed-off-by: James Smart <james.smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-03-03 19:10:26 +05:30
James Smart
0c9ab6f5cb [SCSI] lpfc 8.3.10: Added round robin FCF failover
- Added round robin FCF failover on initial or FCF rediscovery FLOGI failure.

Signed-off-by: James Smart <james.smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-03-03 19:10:09 +05:30
James Smart
fc2b989be9 [SCSI] lpfc 8.3.10: Fix Discovery issues
- Prevent Vport discovery after reg_new_vport completes when physical
  logged in using FDISC.
- Remove fast FCF failover fabric name matching. Allow failover to FCFs
  connected to different fabrics.
- Added fast FCF failover in response to FCF DEAD event on current
  FCF record.

Signed-off-by: James Smart <james.smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-03-03 19:09:52 +05:30
James Smart
e2aed29f29 [SCSI] lpfc 8.3.10: Added management for LP21000 through BSG.
Signed-off-by: James Smart <james.smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-03-03 19:09:36 +05:30
James Smart
0f65ff680f [SCSI] lpfc 8.3.10: Update SLI interface areas
- Clear LPFC_DRIVER_ABORTED on FCP command completion.
- Clear exchange busy flag when I/O is aborted and found on aborted list.
- Free sglq when XRI_ABORTED event is processed before release of IOCB.
- Only process iocb as aborted when LPFC_DRIVER_ABORTED is set.

Signed-off-by: James Smart <james.smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-03-03 19:09:18 +05:30
James Smart
e40a02c125 [SCSI] lpfc 8.3.10: Fix user interface issues
- Add Logging message for critial errors.
- Remove unused variable from lpfc_nodev_tmo_show
- Update supress_link_up parameter with #define values.

Signed-off-by: James Smart <james.smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-03-03 19:08:58 +05:30
James Smart
9f1177a3f8 [SCSI] lpfc 8.3.10: Fix Initialization issues
- Add NULL checks to the pointers for the config_async mailbox
  and dump_wakeup_params mailbox.
- Add code to check return value of lpfc_read_sparams everywhere
  and handle failures appropriately.

Signed-off-by: James Smart <james.smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-03-03 19:08:34 +05:30
Stephen M. Cameron
43aebfa12e [SCSI] hpsa: remove unused members next, prev, and retry_count from command list structure.
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-03-03 18:37:37 +05:30
Stephen M. Cameron
33a2ffce51 [SCSI] hpsa: Increase the number of scatter gather elements supported.
This uses the scatter-gather chaining feature of Smart Array
controllers.  32 scatter-gather elements are embedded in the
"command list", and the last element in the list may be marked
as a "chain pointer", and point to an additional block of
scatter gather elements.  The precise number of scatter gather
elements supported is dependent on the particular kind of
Smart Array, and is determined at runtime by querying the
hardware.

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-03-03 18:37:22 +05:30
Stephen M. Cameron
db61bfcfe2 [SCSI] hpsa: Clarify calculation of padding for commandlist structure
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-03-03 18:37:08 +05:30
Stephen M. Cameron
ff9fea9454 [SCSI] hpsa: mark hpsa_pci_init as __devinit
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-03-03 18:36:58 +05:30
Mike Miller
31468401cc [SCSI] hpsa: remove scan thread
The intent of the scan thread was to allow a UNIT ATTENTION/LUN
DATA CHANGED condition encountered in the interrupt handler
to trigger a rescan of devices, which can't be done in interrupt
context.  However, we weren't able to get this to work, due to
multiple such UNIT ATTENTION conditions arriving during the rescan,
during updating of the SCSI mid layer, etc.  There's no way to tell
the devices, "stand still while I scan you!"  Since it doesn't work,
there's no point in having the thread, as the rescan triggered via
ioctl or sysfs can be done without such a thread.

Signed-off-by: Mike Miller <mikem@beardog.cce.hp.com>
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-03-03 18:36:48 +05:30
Stephen M. Cameron
e9ea04a65a [SCSI] hpsa: return -ENOMEM, not -1
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-03-03 18:36:18 +05:30
Stephen M. Cameron
5512672f75 [SCSI] hpsa: fix scsi status mis-shift
The SCSI status does not need to be shifted.

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-03-03 18:36:04 +05:30
Stephen M. Cameron
f0edafc662 [SCSI] hpsa: fix firmwart typo
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-03-03 18:35:50 +05:30
Stephen M. Cameron
667e23d4e9 [SCSI] hpsa: allow modifying device queue depth.
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-03-03 18:35:40 +05:30
Brian King
b0f4d4cf12 [SCSI] ibmvfc: Add suspend/resume support
Adds support for resuming from suspend for IBM VFC devices. We may have
lost an interrupt over the suspend, so we just kick the interrupt handler
to process anything that is outstanding. We expect to find a transport event
indicating we need to reestablish our CRQ.

Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-03-03 18:32:42 +05:30
Brian King
64355b929d [SCSI] ibmvscsi: Add suspend/resume support
Adds support for resuming from suspend for IBM VSCSI devices. We may have
lost an interrupt over the suspend, so we just kick the interrupt handler
to process anything that is outstanding. We expect to find a transport event
indicating we need to reestablish our CRQ.

Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-03-03 18:32:41 +05:30
Jayamohan Kallickal
c03af1ae1c [SCSI] be2iscsi: Alloc only one EQ if intr mode
This patch ensures that we alloc only one EQ
if we are if we are not in msix mode

Signed-off-by: Jayamohan Kallickal <jayamohank@serverengines.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-03-03 18:31:21 +05:30
Jayamohan Kallickal
ed58ea2ab5 [SCSI] be2iscsi: Fixing memory allocation for connection
This patch fixes some situations where enough resources were not
avaialable  when targets exceeded a certain limit

Signed-off-by: Jayamohan Kallickal <jayamohank@serverengines.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-03-03 18:30:06 +05:30
Jayamohan Kallickal
90a289e876 [SCSI] be2iscsi: Remove debug code
This patch removes some debug lines which are unnecessary and
also aligns some lines in code

Signed-off-by: Jayamohan Kallickal <jayamohank@serverengines.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-03-03 18:29:54 +05:30
Jayamohan Kallickal
dafab8e079 [SCSI] be2iscsi: cleans up abort handling
This patch cleans up abort handling when TMF is sent

Signed-off-by: Jayamohan Kallickal <jayamohank@serverengines.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-03-03 18:29:44 +05:30