Commit Graph

2303 Commits

Author SHA1 Message Date
Paul Fulghum
d4c63b7c74 synclink_gt fix module reference
Get module reference on open() by generic HDLC to prevent module from
unloading while interface is active.

Signed-off-by: Paul Fulghum <paulkf@microgate.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-22 19:52:46 -07:00
Mijo Safradin
32d219854d IPMI: fix warning in ipmi_si_intf.c
trivial change: fix warning

Signed-off-by: Mijo Safradin <safradin@de.ibm.com>
Acked-by: Christian Krafft <krafft@de.ibm.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-22 19:52:46 -07:00
Geert Uytterhoeven
2301060e2b m68k/mac: Make mac_hid_mouse_emulate_buttons() declaration visible
m68k/mac: Make mac_hid_mouse_emulate_buttons() declaration visible

drivers/char/keyboard.c: In function 'kbd_keycode':
drivers/char/keyboard.c:1142: error: implicit declaration of function 'mac_hid_mouse_emulate_buttons'

The forward declaration of mac_hid_mouse_emulate_buttons() is not visible on
m68k because it's hidden in the middle of a big #ifdef block.

Move it to <linux/kbd_kern.h>, correct the type of the second parameter, and
include <linux/kbd_kern.h> where needed.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-22 19:52:45 -07:00
Kent Yoder
8e81cc13a8 tpmdd maintainers
Fix up the maintainers info in the tpm drivers.  Kylene will be out for
some time, so copying the sourceforge list is the best way to get some
attention.

Cc: Marcel Selhorst <tpm@selhorst.net>
Cc: Kylene Jo Hall <kjhall@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-22 19:52:44 -07:00
Andrey Borzenkov
6e420b7e26 [WATCHDOG] Add support for 1533 bridge to alim1535_wdt
From: Andrey Borzenkov <arvidjaar@mail.ru>

They are apparently pretty close (even lspci combines them). The patch
adds support for 0x1533 bridge in addition to 0x1535.

Tested on Toshiba Portege 4000 with

00:07.0 ISA bridge [0601]: ALi Corporation M1533/M1535 PCI to ISA Bridge
[Aladdin IV/V/V+] [10b9:1533]
00:08.0 Bridge [0680]: ALi Corporation M7101 Power Management Controller
[PMU] [10b9:7101]

with result

[ 2090.906736] PCI: Enabling device 0000:00:08.0 (0000 -> 0001)
[ 2090.914034] ALi_M1535: initialized. timeout=3D60 sec (nowayout=3D0)

Signed-off-by: Andrey Borzenkov <arvidjaar@mail.ru>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2007-08-16 20:28:43 +00:00
Wim Van Sebroeck
0f112a86a3 [WATCHDOG] Eurotechwdt.c - clean-up comments
Clean-up history and add a comment about the fact that
the watchdog is actually part of the SMSC FDC 37B782
super I/O chipset.

Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2007-08-16 20:28:22 +00:00
Len Brown
3b6919e536 pull asus sony thinkpad into release branch 2007-08-12 00:17:12 -04:00
Jes Sorensen
b1a47190a6 lguest files should explicitly include asm/paravirt.h
Files using bits from paravirt.h should explicitly include it rather than
relying on it being pulled in by something else.

Signed-off-by: Jes Sorensen <jes@sgi.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-11 15:47:42 -07:00
Alan Cox
42fd552e86 fix serial buffer memory leak
Patch c5c34d4862 (tty: flush flip buffer on
ldisc input queue flush) introduces a race condition which can lead to memory
leaks.

The problem can be triggered when tcflush() is called when data are being
pushed to the line discipline driver by flush_to_ldisc().

flush_to_ldisc() releases tty->buf.lock when calling the line discipline
receive_buf function. At that poing tty_buffer_flush() kicks in and sets both
tty->buf.head and tty->buf.tail to NULL. When flush_to_ldisc() finishes, it
restores tty->buf.head but doesn't touch tty->buf.tail. This corrups the
buffer queue, and the next call to tty_buffer_request_room() will allocate a
new buffer and overwrite tty->buf.head. The previous buffer is then lost
forever without being released.

(Thanks to Laurent for the above text, for finding, disgnosing and reporting
the bug)

- Use tty->flags bits for the flush status.

- Wait for the flag to clear again before returning

- Fix the doc error noted

- Fix flush of empty queue leaving stale flushpending

[akpm@linux-foundation.org: cleanup]
Signed-off-by: Alan Cox <alan@redhat.com>
Acked-by: Paul Fulghum <paulkf@microgate.com>
Cc: Laurent Pinchart <laurentp@cse-semaphore.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-11 15:47:41 -07:00
Daniel Ritz
925796e0ed drivers/char/pcmcia/cm40x0_cs.c: fix release function call
cm4000_cs.c and cm4040_cs.c call the internal release function with
an argument of wrong type. this fixes bug #8485

Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch>
Cc: Bill McConnaughey <mcconnau@biochem.wustl.edu>
Cc: Natalie Protasevich <protasnb@gmail.com>
Cc: Harald Welte <laforge@gnumonks.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-11 15:47:40 -07:00
Dave Airlie
21f1628927 drm/i915: Fix i965 secured batchbuffer usage
This 965G and above chipsets moved the batch buffer non-secure bits to
another place. This means that previous drm's allowed in-secure batchbuffers
to be submitted to the hardware from non-privileged users who are logged
into X and and have access to direct rendering.

Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-06 17:46:23 -07:00
Eugene Teo
f7b88ccb63 sonypi: fix ids member of struct acpi_driver
ids member of struct acpi_driver is of type struct acpi_device_id, not a
character array.

Signed-off-by: Eugene Teo <eugeneteo@kernel.sg>
Signed-off-by: Mattia Dongili <malattia@linux.it>
Signed-off-by: Len Brown <len.brown@intel.com>
2007-08-03 15:26:41 -04:00
Linus Torvalds
2f63251ed0 Merge git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog
* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog: (28 commits)
  [WATCHDOG] Fix pcwd_init_module crash
  [WATCHDOG] ICH9 support for iTCO_wdt
  [WATCHDOG] 631xESB/632xESB support for iTCO_wdt - add all LPC bridges
  [WATCHDOG] 631xESB/632xESB support for iTCO_wdt
  [WATCHDOG] omap_wdt.c - default error for IOCTL is -ENOTTY
  [WATCHDOG] Return value of nonseekable_open
  [WATCHDOG] mv64x60_wdt: Rework the timeout register manipulation
  [WATCHDOG] mv64x60_wdt: disable watchdog timer when driver is probed
  [WATCHDOG] mv64x60_wdt: Support the WDIOF_MAGICCLOSE feature
  [WATCHDOG] mv64x60_wdt: Add a module parameter to change nowayout setting
  [WATCHDOG] mv64x60_wdt: Add WDIOC_SETOPTIONS ioctl support
  [WATCHDOG] mv64x60_wdt: Support for WDIOC_SETTIMEOUT ioctl
  [WATCHDOG] mv64x60_wdt: Fix WDIOC_GETTIMEOUT return value
  [WATCHDOG] mv64x60_wdt: Check return value of nonseekable_open
  [WATCHDOG] mv64x60_wdt: Add arch/powerpc platform support
  [WATCHDOG] mv64x60_wdt: Get register address from platform data
  [WATCHDOG] mv64x60_wdt: set up platform_device in platform code
  [WATCHDOG] ensure mouse and keyboard ignored in w83627hf_wdt
  [WATCHDOG] s3c2410_wdt: fixup after arch include moves
  [WATCHDOG] git-watchdog-typo
  ...
2007-07-31 20:43:52 -07:00
Andrew Morton
ad4a5bb885 ip2main warning fix
CONFIG_PCI=n:

drivers/char/ip2/ip2main.c: In function `ip2_loadmain':
drivers/char/ip2/ip2main.c:503: warning: unused variable `status'

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-31 15:39:44 -07:00
Jesper Juhl
80cd69203c ipmi: Fix mem leak in try_init_dmi()
This is only called at init time and only happens if the BIOS screws
something up, so the leak is slight and it is probably not worth sending to
2.6.22.x.  The driver would not initialize the interface in the case, and I
have no reports of this happening.  I have booted and run tests on a system
with this patch.  Note that the original patch was munged by the mailer,
here's a new one.

If we ever hit the "default:" case in the switch in try_init_dmi(),
then we'll leak the storage allocated with kzalloc() and assigned
to 'info'.

Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-31 15:39:41 -07:00
Paul Fulghum
bb029c67e4 synclink_gt: fix transmit DMA stall
Fix transmit DMA stall when write() called in window after previous
transmit DMA completes but before previous serial transmission completes.

Signed-off-by: Paul Fulghum <paulkf@microgate.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-31 15:39:37 -07:00
Alexey Dobriyan
4e950f6f01 Remove fs.h from mm.h
Remove fs.h from mm.h. For this,
 1) Uninline vma_wants_writenotify(). It's pretty huge anyway.
 2) Add back fs.h or less bloated headers (err.h) to files that need it.

As result, on x86_64 allyesconfig, fs.h dependencies cut down from 3929 files
rebuilt down to 3444 (-12.3%).

Cross-compile tested without regressions on my two usual configs and (sigh):

alpha              arm-mx1ads        mips-bigsur          powerpc-ebony
alpha-allnoconfig  arm-neponset      mips-capcella        powerpc-g5
alpha-defconfig    arm-netwinder     mips-cobalt          powerpc-holly
alpha-up           arm-netx          mips-db1000          powerpc-iseries
arm                arm-ns9xxx        mips-db1100          powerpc-linkstation
arm-assabet        arm-omap_h2_1610  mips-db1200          powerpc-lite5200
arm-at91rm9200dk   arm-onearm        mips-db1500          powerpc-maple
arm-at91rm9200ek   arm-picotux200    mips-db1550          powerpc-mpc7448_hpc2
arm-at91sam9260ek  arm-pleb          mips-ddb5477         powerpc-mpc8272_ads
arm-at91sam9261ek  arm-pnx4008       mips-decstation      powerpc-mpc8313_rdb
arm-at91sam9263ek  arm-pxa255-idp    mips-e55             powerpc-mpc832x_mds
arm-at91sam9rlek   arm-realview      mips-emma2rh         powerpc-mpc832x_rdb
arm-ateb9200       arm-realview-smp  mips-excite          powerpc-mpc834x_itx
arm-badge4         arm-rpc           mips-fulong          powerpc-mpc834x_itxgp
arm-carmeva        arm-s3c2410       mips-ip22            powerpc-mpc834x_mds
arm-cerfcube       arm-shannon       mips-ip27            powerpc-mpc836x_mds
arm-clps7500       arm-shark         mips-ip32            powerpc-mpc8540_ads
arm-collie         arm-simpad        mips-jazz            powerpc-mpc8544_ds
arm-corgi          arm-spitz         mips-jmr3927         powerpc-mpc8560_ads
arm-csb337         arm-trizeps4      mips-malta           powerpc-mpc8568mds
arm-csb637         arm-versatile     mips-mipssim         powerpc-mpc85xx_cds
arm-ebsa110        i386              mips-mpc30x          powerpc-mpc8641_hpcn
arm-edb7211        i386-allnoconfig  mips-msp71xx         powerpc-mpc866_ads
arm-em_x270        i386-defconfig    mips-ocelot          powerpc-mpc885_ads
arm-ep93xx         i386-up           mips-pb1100          powerpc-pasemi
arm-footbridge     ia64              mips-pb1500          powerpc-pmac32
arm-fortunet       ia64-allnoconfig  mips-pb1550          powerpc-ppc64
arm-h3600          ia64-bigsur       mips-pnx8550-jbs     powerpc-prpmc2800
arm-h7201          ia64-defconfig    mips-pnx8550-stb810  powerpc-ps3
arm-h7202          ia64-gensparse    mips-qemu            powerpc-pseries
arm-hackkit        ia64-sim          mips-rbhma4200       powerpc-up
arm-integrator     ia64-sn2          mips-rbhma4500       s390
arm-iop13xx        ia64-tiger        mips-rm200           s390-allnoconfig
arm-iop32x         ia64-up           mips-sb1250-swarm    s390-defconfig
arm-iop33x         ia64-zx1          mips-sead            s390-up
arm-ixp2000        m68k              mips-tb0219          sparc
arm-ixp23xx        m68k-amiga        mips-tb0226          sparc-allnoconfig
arm-ixp4xx         m68k-apollo       mips-tb0287          sparc-defconfig
arm-jornada720     m68k-atari        mips-workpad         sparc-up
arm-kafa           m68k-bvme6000     mips-wrppmc          sparc64
arm-kb9202         m68k-hp300        mips-yosemite        sparc64-allnoconfig
arm-ks8695         m68k-mac          parisc               sparc64-defconfig
arm-lart           m68k-mvme147      parisc-allnoconfig   sparc64-up
arm-lpd270         m68k-mvme16x      parisc-defconfig     um-x86_64
arm-lpd7a400       m68k-q40          parisc-up            x86_64
arm-lpd7a404       m68k-sun3         powerpc              x86_64-allnoconfig
arm-lubbock        m68k-sun3x        powerpc-cell         x86_64-defconfig
arm-lusl7200       mips              powerpc-celleb       x86_64-up
arm-mainstone      mips-atlas        powerpc-chrp32

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-29 17:09:29 -07:00
Wim Van Sebroeck
647e50f383 [WATCHDOG] Fix pcwd_init_module crash
Fix for the problem detected by Ingo Molnar:
enabling CONFIG_PCWATCHDOG=y crashes bzImage bootup.

The reason for this can be found in drivers/makefile
We first do:
obj-y                           += char/
and later we do:
obj-y                           += base/ block/ misc/ mfd/ net/ media/

So if we put a platform or isa or usb bus driver in char/watchdog
(which is called from the Makefile in drivers/char/Makefile)
then we didn't have the different device drivers initialized yet
(they are in drivers/base and drivers/usb and ...)

This fix makes sure that we compile the watchdog drivers after
drivers/base, drivers/misc, drivers/pci and drivers/usb.
We also do the compile after hwmon because in the future the
watchdog temperature support will use the hwmon system.

Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2007-07-29 18:58:39 +00:00
Alan Hourihane
f191f14407 agp: AMD AGP is used on UP1100 & UP1500 alpha boxen
Signed-off-by: Dave Airlie <airlied@redhat.com>
2007-07-27 10:56:43 +10:00
Zhenyu Wang
dde4787642 intel_agp: really fix 945/965GME
Fix some missing places to check with device id info, which
should probe the device gart correctly.

Signed-off-by: Wang Zhenyu <zhenyu.z.wang@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2007-07-27 10:48:13 +10:00
Nick Piggin
a51b34593f agp: don't lock pages
AGP should not need to lock pages. They are not protecting any race
because there is no lock_page calls, only SetPageLocked.

This is causing hangs with d00806b183.

Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2007-07-27 10:46:26 +10:00
Jesper Juhl
190644e180 Fix "use after free" / "double free" bug in ati_create_gatt_pages / ati_free_gatt_pages
Hi,

Coverity spotted a "use after free" bug in
drivers/char/agp/ati-agp.c::ati_create_gatt_pages().

The same one that was in
  drivers/char/agp/amd-k7-agp.c::amd_create_gatt_pages()

The problem is this:
       If "entry = kzalloc(sizeof(struct ati_page_map), GFP_KERNEL);"
fails, then there's a loop in the function to free all entries
allocated so far and break out of the allocation loop. That in itself
is pretty sane, but then the (now freed) 'tables' is assigned to
ati_generic_private.gatt_pages and 'retval' is set to -ENOMEM which
causes ati_free_gatt_pages(); to be called at the end of the function.
The problem with this is that ati_free_gatt_pages() will then loop
'ati_generic_private.num_tables' times and try to free each entry in
tables[] - this is bad since tables has already been freed and
furthermore it will call kfree(tables) at the end - a double free.

This patch removes the freeing loop in ati_create_gatt_pages() and
instead relies entirely on the call to ati_free_gatt_pages() to free
everything we allocated in case of an error. It also sets
ati_generic_private.num_tables to the actual number of entries
allocated instead of just using the value passed in from the caller -
this ensures that ati_free_gatt_pages() will only attempt to free
stuff that was actually allocated.

Note: I'm in no way intimate with this code and I have no way to
actually test this patch (besides compile test it), so while I've
tried to be careful in reading the code and make sure the patch
does the right thing an ACK from someone who actually knows the
code in-depth would be very much appreciated.

Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: Dave Airlie <airlied@linux.ie>
2007-07-27 10:44:32 +10:00
Wim Van Sebroeck
286201dcab [WATCHDOG] ICH9 support for iTCO_wdt
Add support for the ICH9 I/O chipsets to iTCO_wdt.

Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2007-07-26 21:17:06 +00:00
Wim Van Sebroeck
7e0a86f702 [WATCHDOG] 631xESB/632xESB support for iTCO_wdt - add all LPC bridges
Add all LPC bridges for the 631xESB/632xESB I/O chipset.
The datasheet says:
* Device Function = B0:D31:FO
* Function Description = LPC interface
* DEV ID = 267xh
* Comment = 2670h-267Fh

Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2007-07-26 20:49:05 +00:00
Sergey Kononenko
998e6787e6 [WATCHDOG] 631xESB/632xESB support for iTCO_wdt
Add 631xESB/632xESB support to the iTCO_wdt driver.

Signed-off-by: Sergey Kononenko <sergk@sergk.org.ua>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2007-07-26 20:30:08 +00:00
Jiri Slaby
ee2077d97b Char: cyclades, select FW_LOADER
Fix link errors below by selecting FW_LOADER
  LD      .tmp_vmlinux1
drivers/built-in.o: In function `cyz_load_fw':
drivers/char/cyclades.c:4908: undefined reference to `request_firmware'
drivers/char/cyclades.c:4979: undefined reference to `release_firmware'

Cc: <toralf.foerster@gmx.de>
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-26 11:35:19 -07:00
Rusty Russell
f56a384e98 lguest: documentation VII: FIXMEs
Documentation: The FIXMEs

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-26 11:35:17 -07:00
Rusty Russell
e2c9784325 lguest: documentation III: Drivers
Documentation: The Drivers

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-26 11:35:17 -07:00
Al Viro
712aaa1cb1 use CLOCKSOURCE_MASK() instead of too large constant
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-26 11:11:57 -07:00
Linus Torvalds
a4fb2122f1 Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6:
  ACPI: Kconfig: remove CONFIG_ACPI_SLEEP from source
  ACPI: quiet ACPI Exceptions due to no _PTC or _TSS
  ACPI: Remove references to ACPI_STATE_S2 from acpi_pm_enter
  ACPI: Kconfig: always enable CONFIG_ACPI_SLEEP on X86
  ACPI: Kconfig: fold /proc/acpi/sleep under CONFIG_ACPI_PROCFS
  ACPI: Kconfig: CONFIG_ACPI_PROCFS now defaults to N
  ACPI: autoload modules - Create __mod_acpi_device_table symbol for all ACPI drivers
  ACPI: autoload modules - Create ACPI alias interface
  ACPI: autoload modules - ACPICA modifications
  ACPI: asus-laptop: Fix failure exits
  ACPI: fix oops due to typo in new throttling code
  ACPI: ignore _PSx method for hotplugable PCI devices
  ACPI: Use ACPI methods to select PCI device suspend state
  ACPI, PNP: hook ACPI D-state to PNP suspend/resume
  ACPI: Add acpi_pm_device_sleep_state helper routine
  ACPI: Implement the set_target() callback from pm_ops
2007-07-25 11:28:00 -07:00
Wim Van Sebroeck
1bf1496d41 [WATCHDOG] omap_wdt.c - default error for IOCTL is -ENOTTY
The default value for an unknown ioctl call is -ENOTTY.

Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2007-07-24 21:57:52 +00:00
Wim Van Sebroeck
6abe78bf19 [WATCHDOG] Return value of nonseekable_open
Return the value of the nonseekable_open function and not 0.

Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2007-07-24 21:39:52 +00:00
Dale Farnsworth
f18699940c [WATCHDOG] mv64x60_wdt: Rework the timeout register manipulation
Consolidate the timeout config register modification into a single
function.  Also, use the enabled flag in the config register to
determine whether the timer is enabled instead of a separately
maintained flag, MV64x60_WDOG_FLAG_ENABLED.

Add spinlock protection around enabling/disabling the watchdog timer.

Signed-off-by: Dale Farnsworth <dale@farnsworth.org>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2007-07-24 21:16:28 +00:00
Dale Farnsworth
2422df5e26 [WATCHDOG] mv64x60_wdt: disable watchdog timer when driver is probed
Make sure that we disable the watchdog at start-up.

Signed-off-by: Dale Farnsworth <dale@farnsworth.org>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2007-07-24 21:16:24 +00:00
Dale Farnsworth
bf2fc92cae [WATCHDOG] mv64x60_wdt: Support the WDIOF_MAGICCLOSE feature
Disallow disabling of the watchdog timer unless a particular
character ('V') was recently written to the watchdog device.

Signed-off-by: Dale Farnsworth <dale@farnsworth.org>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2007-07-24 21:16:20 +00:00
Dale Farnsworth
d37a5c3ddf [WATCHDOG] mv64x60_wdt: Add a module parameter to change nowayout setting
Also, use the WATCHDOG_NOWAYOUT macro, rather than #ifdefs,
and use __module_get to prevent module unloading if WATCHDOG_NOWAYOUT
is set.

Signed-off-by: Dale Farnsworth <dale@farnsworth.org>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2007-07-24 21:16:18 +00:00
Dale Farnsworth
85d57238d2 [WATCHDOG] mv64x60_wdt: Add WDIOC_SETOPTIONS ioctl support
Allow the watchdog timer to be enabled or disabled via the
WDIOC_SETOPTIONS ioctl.

Signed-off-by: Dale Farnsworth <dale@farnsworth.org>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2007-07-24 21:16:15 +00:00
Dale Farnsworth
94796f9087 [WATCHDOG] mv64x60_wdt: Support for WDIOC_SETTIMEOUT ioctl
Add the ability to modify the watchdog timer timeout interval.

Signed-off-by: Dale Farnsworth <dale@farnsworth.org>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2007-07-24 21:16:12 +00:00
Dale Farnsworth
264f09915a [WATCHDOG] mv64x60_wdt: Fix WDIOC_GETTIMEOUT return value
WDIOC_GETTIMEOUT returns seconds, not jiffies.

Signed-off-by: Dale Farnsworth <dale@farnsworth.org>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2007-07-24 21:16:09 +00:00
Dale Farnsworth
861e513770 [WATCHDOG] mv64x60_wdt: Check return value of nonseekable_open
Return the value of the nonseekable_open function and not 0.

Signed-off-by: Dale Farnsworth <dale@farnsworth.org>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2007-07-24 21:16:05 +00:00
Dale Farnsworth
7e07a15913 [WATCHDOG] mv64x60_wdt: Add arch/powerpc platform support
Add support for arch/powerpc, specifically for the prpmc2800 platform.

Signed-off-by: Dale Farnsworth <dale@farnsworth.org>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2007-07-24 21:16:02 +00:00
Dale Farnsworth
8a5cfa6483 [WATCHDOG] mv64x60_wdt: Get register address from platform data
Previously, the address of the watchdog timer registers was
retrieved by calling a global function, mv64x60_get_bridge_vbase().
That function doesn't exist in arch/powerpc.  Instead, we now get
the register address from a platform data resource and ioremap
the registers within the driver.

Signed-off-by: Dale Farnsworth <dale@farnsworth.org>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2007-07-24 21:15:58 +00:00
Al Viro
2240598c24 [SPARC32]: Deal with rtc/sun_mostek_rtc conflict.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-24 13:24:32 -07:00
Dale Farnsworth
422db8d229 [WATCHDOG] mv64x60_wdt: set up platform_device in platform code
The driver previously registered its platform device data in its own
init function--that's bogus.  Move that code to platform-specific
code in arch/ppc.  This is being done so that the platform code can
decide at runtime whether to initialize this driver or not.

Signed-off-by: Dale Farnsworth <dale@farnsworth.org>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2007-07-24 18:56:35 +00:00
Pádraig Brady
28dd1b0b91 [WATCHDOG] ensure mouse and keyboard ignored in w83627hf_wdt
1. Ensure that the mouse and keyboard do not ping the watchdog.
This is the default operation of the w83627, but some BIOSes change this.

2. Increase the max timeout from 63 seconds to 255 seconds
as supported by the w83627 chip

3. Comment that the watchdog supports the w83627hg version of the chip

Signed-Off-By: Pádraig Brady <P@draigBrady.com>
Tested-by: Tomas Hodek <tomas.hodek@volny.cz>
Signed-Off-By: Wim Van Sebroeck <wim@iguana.be>
2007-07-24 17:08:54 +00:00
Ben Dooks
b430708ad6 [WATCHDOG] s3c2410_wdt: fixup after arch include moves
Fixup the s3c2410 watchdog driver after moving some
of the arch specific includes it has been relying on.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2007-07-24 17:08:14 +00:00
Andrew Morton
4e24f4edb6 [WATCHDOG] git-watchdog-typo
From: Andrew Morton <akpm@linux-foundation.org>

This driver isn't very coding-style friendly.

Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2007-07-24 16:45:30 +00:00
Thomas Renninger
1ba90e3a87 ACPI: autoload modules - Create __mod_acpi_device_table symbol for all ACPI drivers
modpost is going to use these to create e.g. acpi:ACPI0001
in modules.alias.

Signed-off-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Len Brown <len.brown@intel.com>
2007-07-23 13:56:42 -04:00
Wim Van Sebroeck
c0e962f93d [WATCHDOG] Clean-up Kconfig+Makefile
Clean-up of the watchdog's Kconfig and makefile files.

Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2007-07-23 17:42:49 +00:00
Wim Van Sebroeck
5c4eb61b37 [WATCHDOG] WDIOC_GETSTATUS and WDIOC_GETBOOTSTATUS clean-up
Add mandatory WDIOC_GETSTATUS and WDIOC_GETBOOTSTATUS ioctl's for
drivers that don't have them yet.

Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2007-07-23 17:26:49 +00:00