Commit Graph

87 Commits

Author SHA1 Message Date
Trond Myklebust
a08a8cd375 NFS: Add attribute update barriers to NFS writebacks
Ensure that other operations that race with our write RPC calls
cannot revert the file size updates that were made on the server.

Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Tested-by: Chuck Lever <chuck.lever@oracle.com>
2015-03-01 23:23:06 -05:00
Trond Myklebust
f044636d97 NFS: Add attribute update barriers to nfs_setattr_update_inode()
Ensure that other operations which raced with our setattr RPC call
cannot revert the file attribute changes that were made on the server.
To do so, we artificially bump the attribute generation counter on
the inode so that all calls to nfs_fattr_init() that precede ours
will be dropped.

The motivation for the patch came from Chuck Lever's reports of readaheads
racing with truncate operations and causing the file size to be reverted.

Reported-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Tested-by: Chuck Lever <chuck.lever@oracle.com>
2015-03-01 23:23:05 -05:00
Weston Andros Adamson
d45f60c678 nfs: merge nfs_pgio_data into _header
struct nfs_pgio_data only exists as a member of nfs_pgio_header, but is
passed around everywhere, because there used to be multiple _data structs
per _header. Many of these functions then use the _data to find a pointer
to the _header.  This patch cleans this up by merging the nfs_pgio_data
structure into nfs_pgio_header and passing nfs_pgio_header around instead.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Weston Andros Adamson <dros@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2014-06-24 18:47:00 -04:00
Anna Schumaker
a4cdda5911 NFS: Create a common pgio_rpc_prepare function
The read and write paths do exactly the same thing for the rpc_prepare
rpc_op.  This patch combines them together into a single function.

Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2014-05-28 18:40:28 -04:00
Anna Schumaker
9c7e1b3d50 NFS: Create a common read and write data struct
At this point, the only difference between nfs_read_data and
nfs_write_data is the write verifier.

Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2014-05-28 18:12:47 -04:00
Christoph Hellwig
fab5fc25d2 nfs: remove ->read_pageio_init from rpc ops
The read_pageio_init method is just a very convoluted way to grab the
right nfs_pageio_ops vector.  The vector to chose is not a choice of
protocol version, but just a pNFS vs MDS I/O choice that can simply be
done inside nfs_pageio_init_read based on the presence of a layout
driver, and a new force_mds flag to the special case of falling back
to MDS I/O on a pNFS-capable volume.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2014-05-28 17:50:08 -04:00
Christoph Hellwig
a20c93e316 nfs: remove ->write_pageio_init from rpc ops
The write_pageio_init method is just a very convoluted way to grab the
right nfs_pageio_ops vector.  The vector to chose is not a choice of
protocol version, but just a pNFS vs MDS I/O choice that can simply be
done inside nfs_pageio_init_write based on the presence of a layout
driver, and a new force_mds flag to the special case of falling back
to MDS I/O on a pNFS-capable volume.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2014-05-28 17:48:38 -04:00
Jeff Layton
33912be816 nfs: remove synchronous rename code
Now that nfs_rename uses the async infrastructure, we can remove this.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Tested-by: Anna Schumaker <Anna.Schumaker@netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2014-03-17 15:14:17 -04:00
Al Viro
6de1472f1a nfs: use %p[dD] instead of open-coded (and often racy) equivalents
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-10-24 23:34:50 -04:00
NeilBrown
ef1820f9be NFSv4: Don't try to recover NFSv4 locks when they are lost.
When an NFSv4 client loses contact with the server it can lose any
locks that it holds.

Currently when it reconnects to the server it simply tries to reclaim
those locks.  This might succeed even though some other client has
held and released a lock in the mean time.  So the first client might
think the file is unchanged, but it isn't.  This isn't good.

If, when recovery happens, the locks cannot be claimed because some
other client still holds the lock, then we get a message in the kernel
logs, but the client can still write.  So two clients can both think
they have a lock and can both write at the same time.  This is equally
not good.

There was a patch a while ago
  http://comments.gmane.org/gmane.linux.nfs/41917

which tried to address some of this, but it didn't seem to go
anywhere.  That patch would also send a signal to the process.  That
might be useful but for now this patch just causes writes to fail.

For NFSv4 (unlike v2/v3) there is a strong link between the lock and
the write request so we can fairly easily fail any IO of the lock is
gone.  While some applications might not expect this, it is still
safer than allowing the write to succeed.

Because this is a fairly big change in behaviour a module parameter,
"recover_locks", is introduced which defaults to true (the current
behaviour) but can be set to "false" to tell the client not to try to
recover things that were lost.

Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2013-09-04 12:26:32 -04:00
David Quigley
1775fd3e80 NFS:Add labels to client function prototypes
After looking at all of the nfsv4 operations the label structure has been added
to the prototypes of the functions which can transmit label data.

Signed-off-by: Matthew N. Dodd <Matthew.Dodd@sparta.com>
Signed-off-by: Miguel Rodel Felipe <Rodel_FM@dsi.a-star.edu.sg>
Signed-off-by: Phua Eu Gene <PHUA_Eu_Gene@dsi.a-star.edu.sg>
Signed-off-by: Khin Mi Mi Aung <Mi_Mi_AUNG@dsi.a-star.edu.sg>
Signed-off-by: Steve Dickson <steved@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2013-06-08 16:20:15 -04:00
Al Viro
496ad9aa8e new helper: file_inode(file)
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-02-22 23:31:31 -05:00
Andy Adamson
eb96d5c97b SUNRPC handle EKEYEXPIRED in call_refreshresult
Currently, when an RPCSEC_GSS context has expired or is non-existent
and the users (Kerberos) credentials have also expired or are non-existent,
the client receives the -EKEYEXPIRED error and tries to refresh the context
forever.  If an application is performing I/O, or other work against the share,
the application hangs, and the user is not prompted to refresh/establish their
credentials. This can result in a denial of service for other users.

Users are expected to manage their Kerberos credential lifetimes to mitigate
this issue.

Move the -EKEYEXPIRED handling into the RPC layer. Try tk_cred_retry number
of times to refresh the gss_context, and then return -EACCES to the application.

Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-12-12 15:36:02 -05:00
Bryan Schumaker
1179acc6a3 NFS: Only initialize the ACL client in the v3 case
v2 and v4 don't use it, so I create two new nfs_rpc_ops functions to
initialize the ACL client only when we are using v3.

Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-07-30 19:05:54 -04:00
Bryan Schumaker
ff9099f266 NFS: Create a try_mount rpc op
I'm already looking up the nfs subversion in nfs_fs_mount(), so I have
easy access to rpc_ops that used to be difficult to reach.  This allows
me to set up a different mount path for NFS v2/3 and NFS v4.

Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-07-30 19:04:53 -04:00
Bryan Schumaker
597d92891b NFS: Split out NFS v2 inode operations
This patch moves the NFS v2 file and directory inode functions into
files that are only compiled whet CONFIG_NFS_V2 is enabled.

Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-07-17 13:32:55 -04:00
Trond Myklebust
8626e4a426 Merge commit '9249e17fe094d853d1ef7475dd559a2cc7e23d42' into nfs-for-3.6
Resolve conflicts with the VFS atomic open and sget changes.

Conflicts:
	fs/nfs/nfs4proc.c
2012-07-16 12:01:42 -04:00
Miklos Szeredi
8867fe5899 nfs: clean up ->create in nfs_rpc_ops
Don't pass nfs_open_context() to ->create().  Only the NFS4 implementation
needed that and only because it wanted to return an open file using open
intents.  That task has been replaced by ->atomic_open so it is not necessary
anymore to pass the context to the create rpc operation.

Despite nfs4_proc_create apparently being okay with a NULL context it Oopses
somewhere down the call chain.  So allocate a context here.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
CC: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-07-14 16:33:08 +04:00
Bryan Schumaker
57208fa7e5 NFS: Create an write_pageio_init() function
pNFS needs to select a write function based on the layout driver
currently in use, so I let each NFS version decide how to best handle
initializing writes.

Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-06-29 11:46:46 -04:00
Bryan Schumaker
1abb50886a NFS: Create an read_pageio_init() function
pNFS needs to select a read function based on the layout driver
currently in use, so I let each NFS version decide how to best handle
initializing reads.

Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-06-29 11:46:46 -04:00
Bryan Schumaker
6663ee7f81 NFS: Create an alloc_client rpc_op
This gives NFS v4 a way to set up callbacks and sessions without v2 or
v3 having to do them as well.

Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-06-29 11:46:46 -04:00
Bryan Schumaker
cdb7ecedec NFS: Create a free_client rpc_op
NFS v4 needs a way to shut down callbacks and sessions, but v2 and v3
don't.

Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-06-29 11:46:45 -04:00
Bryan Schumaker
57ec14c55d NFS: Create a return_delegation rpc op
Delegations are a v4 feature, so push return_delegation out of the
generic client by creating a new rpc_op and renaming the old function to
be in the nfs v4 "namespace"

Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-06-29 11:46:45 -04:00
Bryan Schumaker
011e2a7fd5 NFS: Create a have_delegation rpc_op
Delegations are a v4 feature, so push them out of the generic code.

Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-06-29 11:46:44 -04:00
Sachin Prabhu
64f9a83665 NFSv2: EOF incorrectly set on short read
In cases where the server returns fewer bytes then those requested, we
can incorrectly set the eof flag for the file. Fixing this allows the
request to be retried with updated offset and count arguments.

Signed-off-by: Sachin Prabhu <sprabhu@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-06-11 17:25:00 -04:00
Linus Torvalds
53f2c4a8fd NFS client updates for Linux 3.5
New features include:
 - Rewrite the O_DIRECT code so that it can share the same coalescing and
   pNFS functionality as the page cache code.
 - Allow the server to provide hints as to when we should use pNFS, and
   when it is more efficient to read and write through the metadata
   server.
 - NFS cache consistency updates:
   - Use the ctime to emulate a change attribute for NFSv2/v3 so that
     all NFS versions can share the same cache management code.
   - New cache management code will only look at the change attribute
     and size attribute when deciding whether or not our cached data
     is still valid or not.
   - Don't request NFSv4 post-op attributes on writes in cases such as
     O_DIRECT, where we don't care about data cache consistency, or
     when we have a write delegation, and know that our cache is
     still consistent.
   - Don't request NFSv4 post-op attributes on operations such as
     COMMIT, where there are no expected metadata updates.
   - Don't request NFSv4 directory post-op attributes in cases where
     the operations themselves already return change attribute updates:
     i.e.  operations such as OPEN, CREATE, REMOVE, LINK and RENAME.
 - Speed up 'ls' and friends by using READDIR rather than READDIRPLUS
   if we detect no attempts to lookup filenames.
 - Improve the code sharing between NFSv2/v3 and v4 mounts
 - NFSv4.1 state management efficiency improvements
 - More patches in preparation for NFSv4/v4.1 migration functionality.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJPw/MNAAoJEGcL54qWCgDyxU8P/2kKqhAlhoLEArBqo9FT3/OK
 YrNs5uO/erTgnCG8L0XQvTKjHB9F7TAeFXqTmBZuPlb1afRpHHt2vzPqzIvUCeOC
 ZXm8vzZf4nxWZgEFoTDdUBvqQi9lLdIzCRhSaVCKcRnNwiuaKDd/iwykbWGcHqmv
 jtR4lzXPllJdKCUL3yb3juVrpq6Vvn254ID2pqdnYcEtIJIHgaRZpwdp4Iz9+8b5
 Moishiw2rgCBJIhf+VCYd8B2oYfMgSDPxG1o3etkwY46qo+4s+CIls9Vu/6YzGXK
 3+NdLatRDqKhQpLm0/R+dI3rntnTZ8x6LgWnTGxUsiqb6pAaHZPK284rf2eh/s7M
 Q4G4203r0uw539kIt6eKOGqC9c8kZAPCHlQSPCaImZyCJsz+6OMShNlGB5bZpFPr
 tbdxaxudrhCF7UVKXicJCWgv2nIHtek6fNwey1jqFoYgZP5ipiBKymvXQC5WAMBw
 7RHJor/JEC+UJkVg/7Mkpg0UNw3E36CTYLeRJKlNCS6YO9NJQseCDxhhMNAy/ab7
 RGO8DVMkUsOUH20S+a19LyeFQtveWFIE0DiDqRn0KnNGhGwHrv2t4xFukjlrf4Sw
 8FQUBRdtFxfmspfA1IdoTY49XZQda5eagvTy1MyaWEh+jPSJ4G5j3sSjFiaKAJqw
 79iQKFGkxPOSHx2yCdAF
 =suVW
 -----END PGP SIGNATURE-----

Merge tag 'nfs-for-3.5-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs

Pull NFS client updates from Trond Myklebust:
 "New features include:
   - Rewrite the O_DIRECT code so that it can share the same coalescing
     and pNFS functionality as the page cache code.
   - Allow the server to provide hints as to when we should use pNFS,
     and when it is more efficient to read and write through the
     metadata server.
   - NFS cache consistency updates:
     * Use the ctime to emulate a change attribute for NFSv2/v3 so that
       all NFS versions can share the same cache management code.
     * New cache management code will only look at the change attribute
       and size attribute when deciding whether or not our cached data
       is still valid or not.
     * Don't request NFSv4 post-op attributes on writes in cases such as
       O_DIRECT, where we don't care about data cache consistency, or
       when we have a write delegation, and know that our cache is still
       consistent.
     * Don't request NFSv4 post-op attributes on operations such as
       COMMIT, where there are no expected metadata updates.
     * Don't request NFSv4 directory post-op attributes in cases where
       the operations themselves already return change attribute
       updates: i.e. operations such as OPEN, CREATE, REMOVE, LINK and
       RENAME.
   - Speed up 'ls' and friends by using READDIR rather than READDIRPLUS
     if we detect no attempts to lookup filenames.
   - Improve the code sharing between NFSv2/v3 and v4 mounts
   - NFSv4.1 state management efficiency improvements
   - More patches in preparation for NFSv4/v4.1 migration functionality."

Fix trivial conflict in fs/nfs/nfs4proc.c that was due to the dcache
qstr name initialization changes (that made the length/hash a 64-bit
union)

* tag 'nfs-for-3.5-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (146 commits)
  NFSv4: Add debugging printks to state manager
  NFSv4: Map NFS4ERR_SHARE_DENIED into an EACCES error instead of EIO
  NFSv4: update_changeattr does not need to set NFS_INO_REVAL_PAGECACHE
  NFSv4.1: nfs4_reset_session should use nfs4_handle_reclaim_lease_error
  NFSv4.1: Handle other occurrences of NFS4ERR_CONN_NOT_BOUND_TO_SESSION
  NFSv4.1: Handle NFS4ERR_CONN_NOT_BOUND_TO_SESSION in the state manager
  NFSv4.1: Handle errors in nfs4_bind_conn_to_session
  NFSv4.1: nfs4_bind_conn_to_session should drain the session
  NFSv4.1: Don't clobber the seqid if exchange_id returns a confirmed clientid
  NFSv4.1: Add DESTROY_CLIENTID
  NFSv4.1: Ensure we use the correct credentials for bind_conn_to_session
  NFSv4.1: Ensure we use the correct credentials for session create/destroy
  NFSv4.1: Move NFSPROC4_CLNT_BIND_CONN_TO_SESSION to the end of the operations
  NFSv4.1: Handle NFS4ERR_SEQ_MISORDERED when confirming the lease
  NFSv4: When purging the lease, we must clear NFS4CLNT_LEASE_CONFIRM
  NFSv4: Clean up the error handling for nfs4_reclaim_lease
  NFSv4.1: Exchange ID must use GFP_NOFS allocation mode
  nfs41: Use BIND_CONN_TO_SESSION for CB_PATH_DOWN*
  nfs4.1: add BIND_CONN_TO_SESSION operation
  NFSv4.1 test the mdsthreshold hint parameters
  ...
2012-05-29 10:43:51 -07:00
Linus Torvalds
26fe575028 vfs: make it possible to access the dentry hash/len as one 64-bit entry
This allows comparing hash and len in one operation on 64-bit
architectures.  Right now only __d_lookup_rcu() takes advantage of this,
since that is the case we care most about.

The use of anonymous struct/unions hides the alternate 64-bit approach
from most users, the exception being a few cases where we initialize a
'struct qstr' with a static initializer.  This makes the problematic
cases use a new QSTR_INIT() helper function for that (but initializing
just the name pointer with a "{ .name = xyzzy }" initializer remains
valid, as does just copying another qstr structure).

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-10 19:54:35 -07:00
Bryan Schumaker
80a16b21a8 NFS: Remove extra rpc_clnt argument to proc_lookup
Now that I'm doing secinfo automatically in the v4 code this extra
argument isn't needed.

Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-04-27 14:10:39 -04:00
Bryan Schumaker
281cad46b3 NFS: Create a submount rpc_op
This simplifies the code for v2 and v3 and gives v4 a chance to decide
on referrals without needing to modify the generic client.

Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-04-27 14:10:39 -04:00
Fred Isaman
cd841605f7 NFS: create common nfs_pgio_header for both read and write
In order to avoid duplicating all the data in nfs_read_data whenever we
split it up into multiple RPC calls (either due to a short read result
or due to rsize < PAGE_SIZE), we split out the bits that are the same
per RPC call into a separate "header" structure.

The goal this patch moves towards is to have a single header
refcounted by several rpc_data structures.  Thus, want to always refer
from rpc_data to the header, and not the other way.  This patch comes
close to that ideal, but the directio code currently needs some
special casing, isolated in the nfs_direct_[read_write]hdr_release()
functions.  This will be dealt with in a future patch.

Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-04-27 14:10:37 -04:00
Fred Isaman
0b7c01533a NFS: add a struct nfs_commit_data to replace nfs_write_data in commits
Commits don't need the vectors of pages, etc. that writes do. Split out
a separate structure for the commit operation.

Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-04-27 14:10:37 -04:00
Bryan Schumaker
c6bfa1a163 NFS: Remove nfs4_setup_sequence from generic rename code
This is an NFS v4 specific operation, so it belongs in the NFS v4 code
and not the generic client.

Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-03-21 09:31:46 -04:00
Bryan Schumaker
34e137cc7e NFS: Remove nfs4_setup_sequence from generic unlink code
This is an NFS v4 specific operation, so it belongs in the NFS v4 code
and not the generic client.

Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-03-21 09:31:46 -04:00
Bryan Schumaker
ea7c330362 NFS: Remove nfs4_setup_sequence from generic read code
This is an NFS v4 specific operation, so it belongs in the NFS v4 code
and not the generic client.

Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-03-21 09:31:45 -04:00
Bryan Schumaker
c6cb80d00b NFS: Remove nfs4_setup_sequence from generic write code
This is an NFS v4 specific operation, so it belongs in the NFS v4 code
and not the generic client.

Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-03-21 09:31:45 -04:00
Jeff Layton
d310310cbf Freezer / sunrpc / NFS: don't allow TASK_KILLABLE sleeps to block the freezer
Allow the freezer to skip wait_on_bit_killable sleeps in the sunrpc
layer. This should allow suspend and hibernate events to proceed, even
when there are RPC's pending on the wire.

Also, wrap the TASK_KILLABLE sleeps in NFS layer in freezer_do_not_count
and freezer_count calls. This allows the freezer to skip tasks that are
sleeping while looping on EJUKEBOX or NFS4ERR_DELAY sorts of errors.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-12-06 22:12:27 +01:00
Jeff Layton
1788ea6e3b nfs: when attempting to open a directory, fall back on normal lookup (try #5)
commit d953126 changed how nfs_atomic_lookup handles an -EISDIR return
from an OPEN call. Prior to that patch, that caused the client to fall
back to doing a normal lookup. When that patch went in, the code began
returning that error to userspace. The d_revalidate codepath however
never had the corresponding change, so it was still possible to end up
with a NULL ctx->state pointer after that.

That patch caused a regression. When we attempt to open a directory that
does not have a cached dentry, that open now errors out with EISDIR. If
you attempt the same open with a cached dentry, it will succeed.

Fix this by reverting the change in nfs_atomic_lookup and allowing
attempts to open directories to fall back to a normal lookup

Also, add a NFSv4-specific f_ops->open routine that just returns
-ENOTDIR. This should never be called if things are working properly,
but if it ever is, then the dprintk may help in debugging.

To facilitate this, a new file_operations field is also added to the
nfs_rpc_ops struct.

Cc: stable@kernel.org
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-11-04 16:39:04 -04:00
Bryan Schumaker
7c5130588d NFS: lookup supports alternate client
A later patch will need to perform a lookup using an
alternate client with a different security flavor.
This patch adds support for doing that on NFS v4.

Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-03-24 13:52:41 -04:00
Andy Adamson
45a52a0207 NFS move nfs_client initialization into nfs_get_client
Now nfs_get_client returns an nfs_client ready to be used no matter if it was
found or created.

Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-03-11 15:38:41 -05:00
Jesper Juhl
878215feb8 NFS: Don't leak in nfs_proc_symlink()
Hi,

In fs/nfs/proc.c::nfs_proc_symlink() we will leak memory if either
nfs_alloc_fhandle() or nfs_alloc_fattr() returns NULL but the other one
doesn't.
This patch ensures memory allocated by one when the other fails is always
released (this is safe since nfs_free_fattr() and nfs_free_fhandle() both
call kfree which deals gracefully with NULL pointers).

Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-01-04 13:10:36 -05:00
Chuck Lever
f796f8b3ae NFS: Introduce new-style XDR decoding functions for NFSv2
We'd like to prevent local buffer overflows caused by malicious or
broken servers.  New xdr_stream style decoders can do that.

For efficiency, we also eventually want to be able to pass xdr_streams
from call_decode() to all XDR decoding functions, rather than building
an xdr_stream in every XDR decoding function in the kernel.

nfs_decode_dirent() is renamed to follow the naming convention of the
other two dirent decoders.

Static helper functions are left without the "inline" directive.  This
allows the compiler to choose automatically how to optimize these for
size or speed.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-12-16 12:37:21 -05:00
Bryan Schumaker
56e4ebf877 NFS: readdir with vmapped pages
We can use vmapped pages to read more information from the network at once.
This will reduce the number of calls needed to complete a readdir.

Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
[trondmy: Added #include for linux/vmalloc.h> in fs/nfs/dir.c]
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-10-23 15:27:35 -04:00
Jeff Layton
d3d4152a5d nfs: make sillyrename an async operation
A synchronous rename can be interrupted by a SIGKILL. If that happens
during a sillyrename operation, it's possible for the rename call to
be sent to the server, but the task exits before processing the
reply. If this happens, the sillyrenamed file won't get cleaned up
during nfs_dentry_iput and the server is left with a dangling .nfs* file
hanging around.

Fix this problem by turning sillyrename into an asynchronous operation
and have the task doing the sillyrename just wait on the reply. If the
task is killed before the sillyrename completes, it'll still proceed
to completion.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-09-17 17:31:57 -04:00
Jeff Layton
920769f031 nfs: standardize the rename args container
Each NFS version has its own version of the rename args container.
Standardize them on a common one that's identical to the one NFSv4
uses.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-09-17 17:30:25 -04:00
Trond Myklebust
c0204fd2b8 NFS: Clean up nfs4_proc_create()
Remove all remaining references to the struct nameidata from the low level
NFS layers. Again pass down a partially initialised struct nfs_open_context
when we want to do atomic open+create.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-09-17 10:56:51 -04:00
Trond Myklebust
23a306120f NFS: Reduce the stack footprint of nfs_proc_symlink()
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-05-14 15:09:27 -04:00
Trond Myklebust
eb872f0c8e NFS: Reduce the stack footprint of nfs_proc_create
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-05-14 15:09:26 -04:00
Tejun Heo
5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00
Jeff Layton
97cefcc6d0 nfs: handle NFSv2 -EKEYEXPIRED returns from RPC layer appropriately
Add a wrapper around rpc_call_sync that handles -EKEYEXPIRED errors from
the RPC layer as it would an -EJUKEBOX error if NFSv2 had such a thing.
Also, add a handler for that error for async calls that makes it
resubmit the RPC on -EKEYEXPIRED.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-02-10 08:30:52 -05:00
Alexey Dobriyan
2bcd57ab61 headers: utsname.h redux
* remove asm/atomic.h inclusion from linux/utsname.h --
   not needed after kref conversion
 * remove linux/utsname.h inclusion from files which do not need it

NOTE: it looks like fs/binfmt_elf.c do not need utsname.h, however
due to some personality stuff it _is_ needed -- cowardly leave ELF-related
headers and files alone.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-23 18:13:10 -07:00