Commit Graph

13 Commits

Author SHA1 Message Date
David S. Miller
e0204409df [SPARC64]: dr-cpu unconfigure support.
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-16 04:05:32 -07:00
David S. Miller
4f0234f4f9 [SPARC64]: Initial LDOM cpu hotplug support.
Only adding cpus is supports at the moment, removal
will come next.

When new cpus are configured, the machine description is
updated.  When we get the configure request we pass in a
cpu mask of to-be-added cpus to the mdesc CPU node parser
so it only fetches information for those cpus.  That code
also proceeds to update the SMT/multi-core scheduling bitmaps.

cpu_up() does all the work and we return the status back
over the DS channel.

CPUs via dr-cpu need to be booted straight out of the
hypervisor, and this requires:

1) A new trampoline mechanism.  CPUs are booted straight
   out of the hypervisor with MMU disabled and running in
   physical addresses with no mappings installed in the TLB.

   The new hvtramp.S code sets up the critical cpu state,
   installs the locked TLB mappings for the kernel, and
   turns the MMU on.  It then proceeds to follow the logic
   of the existing trampoline.S SMP cpu bringup code.

2) All calls into OBP have to be disallowed when domaining
   is enabled.  Since cpus boot straight into the kernel from
   the hypervisor, OBP has no state about that cpu and therefore
   cannot handle being invoked on that cpu.

   Luckily it's only a handful of interfaces which can be called
   after the OBP device tree is obtained.  For example, rebooting,
   halting, powering-off, and setting options node variables.

CPU removal support will require some infrastructure changes
here.  Namely we'll have to process the requests via a true
kernel thread instead of in a workqueue.  workqueues run on
a per-cpu thread, but when unconfiguring we might need to
force the thread to execute on another cpu if the current cpu
is the one being removed.  Removal of a cpu also causes the kernel
to destroy that cpu's workqueue running thread.

Another issue on removal is that we may have interrupts still
pointing to the cpu-to-be-removed.  So new code will be needed
to walk the active INO list and retarget those cpus as-needed.

Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-16 04:04:40 -07:00
David S. Miller
a2f9f6bbb3 [SPARC64]: Fix {mc,smt}_capable().
It's not just sun4v hypervisor platforms that should return true
for this, sun4u with UltraSPARC-IV should return true too.

Signed-off-by: David S. Miller <davem@davemloft.net>
2007-06-04 21:50:05 -07:00
David S. Miller
f78eae2e6f [SPARC64]: Proper multi-core scheduling support.
The scheduling domain hierarchy is:

   all cpus -->
      cpus that share an instruction cache -->
          cpus that share an integer execution unit

Signed-off-by: David S. Miller <davem@davemloft.net>
2007-06-04 21:50:00 -07:00
David S. Miller
5cbc307373 [SPARC64]: Use machine description and OBP properly for cpu probing.
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-29 02:49:41 -07:00
Fernando Luis Vazquez Cao
2f4dfe206a Remove hardcoding of hard_smp_processor_id on UP systems
With the advent of kdump, the assumption that the boot CPU when booting an UP
kernel is always the CPU with a particular hardware ID (often 0) (usually
referred to as BSP on some architectures) is not valid anymore.  The reason
being that the dump capture kernel boots on the crashed CPU (the CPU that
invoked crash_kexec), which may be or may not be that particular CPU.

Move definition of hard_smp_processor_id for the UP case to
architecture-specific code ("asm/smp.h") where it belongs, so that each
architecture can provide its own implementation.

Signed-off-by: Fernando Luis Vazquez Cao <fernando@oss.ntt.co.jp>
Cc: "Luck, Tony" <tony.luck@intel.com>
Acked-by: Andi Kleen <ak@suse.de>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Vivek Goyal <vgoyal@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-09 12:30:48 -07:00
David S. Miller
777a447529 [SPARC64]: Unify timer interrupt handler.
Things were scattered all over the place, split between
SMP and non-SMP.

Unify it all so that dyntick support is easier to add.

Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-26 01:54:11 -07:00
David Woodhouse
62c4f0a2d5 Don't include linux/config.h from anywhere else in include/
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-04-26 12:56:16 +01:00
David S. Miller
8935dced54 [SPARC64]: Add SMT scheduling support for Niagara.
The mapping is a simple "(cpuid >> 2) == core" for now.
Later we'll add more sophisticated code that will walk
the sun4v machine description and figure this out from
there.

We should also add core mappings for jaguar and panther
processors.

Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20 01:14:24 -08:00
David S. Miller
92704a1c63 [SPARC64]: Refine code sequences to get the cpu id.
On uniprocessor, it's always zero for optimize that.

On SMP, the jmpl to the stub kills the return address stack in the cpu
branch prediction logic, so expand the code sequence inline and use a
code patching section to fix things up.  This also always better and
explicit register selection, which will be taken advantage of in a
future changeset.

The hard_smp_processor_id() function is big, so do not inline it.

Fix up tests for Jalapeno to also test for Serrano chips too.  These
tests want "jbus Ultra-IIIi" cases to match, so that is what we should
test for.

Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20 01:11:35 -08:00
David S. Miller
7abea92145 [SPARC64]: Make cpu_present_map available earlier.
The change to kernel/sched.c's init code to use for_each_cpu()
requires that the cpu_possible_map be setup much earlier.

Set it up via setup_arch(), constrained to NR_CPUS, and later
constrain it to max_cpus in smp_prepare_cpus().

This fixes SMP booting on sparc64.

Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-26 19:36:00 -08:00
Ingo Molnar
39c715b717 [PATCH] smp_processor_id() cleanup
This patch implements a number of smp_processor_id() cleanup ideas that
Arjan van de Ven and I came up with.

The previous __smp_processor_id/_smp_processor_id/smp_processor_id API
spaghetti was hard to follow both on the implementational and on the
usage side.

Some of the complexity arose from picking wrong names, some of the
complexity comes from the fact that not all architectures defined
__smp_processor_id.

In the new code, there are two externally visible symbols:

 - smp_processor_id(): debug variant.

 - raw_smp_processor_id(): nondebug variant. Replaces all existing
   uses of _smp_processor_id() and __smp_processor_id(). Defined
   by every SMP architecture in include/asm-*/smp.h.

There is one new internal symbol, dependent on DEBUG_PREEMPT:

 - debug_smp_processor_id(): internal debug variant, mapped to
                             smp_processor_id().

Also, i moved debug_smp_processor_id() from lib/kernel_lock.c into a new
lib/smp_processor_id.c file.  All related comments got updated and/or
clarified.

I have build/boot tested the following 8 .config combinations on x86:

 {SMP,UP} x {PREEMPT,!PREEMPT} x {DEBUG_PREEMPT,!DEBUG_PREEMPT}

I have also build/boot tested x64 on UP/PREEMPT/DEBUG_PREEMPT.  (Other
architectures are untested, but should work just fine.)

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Arjan van de Ven <arjan@infradead.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21 18:46:13 -07:00
Linus Torvalds
1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00