Commit Graph

67 Commits

Author SHA1 Message Date
Takashi Iwai
20a24225d8 ALSA: PCI: Remove superfluous pci_set_drvdata(pci, NULL) at remove
As drvdata is cleared to NULL at probe failure or at removal by the
driver core, we don't have to call pci_set_drvdata(pci, NULL) any
longer in each driver.

The only remaining pci_set_drvdata(NULL) is in azx_firmware_cb() in
hda_intel.c.  Since this function itself releases the card instance,
we need to clear drvdata here as well, so that it won't be released
doubly in the remove callback.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-05-29 12:37:32 +02:00
Bill Pemberton
e23e7a1436 ALSA: pci: remove __dev* attributes
CONFIG_HOTPLUG is going away as an option.  As result the __dev*
markings will be going away.

Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst,
and __devexit.

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-12-07 07:20:55 +01:00
Takashi Iwai
c7561cd804 ALSA: PCI: Replace CONFIG_PM with CONFIG_PM_SLEEP
Otherwise we may get compile warnings due to unused functions.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-08-14 18:12:04 +02:00
Takashi Iwai
68cb2b5592 ALSA: Convert to new pm_ops for PCI drivers
Straightforward conversion to the new pm_ops from the legacy
suspend/resume ops.

Since we change vx222, vx_core and vxpocket have to be converted,
too.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-07-03 08:23:03 +02:00
Takashi Iwai
e9f66d9b9c ALSA: pci: clean up using module_pci_driver()
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-04-24 12:25:00 +02:00
Rusty Russell
a67ff6a540 ALSA: module_param: make bool parameters really bool
module_param(bool) used to counter-intuitively take an int.  In
fddd5201 (mid-2009) we allowed bool or int/unsigned int using a messy
trick.

It's time to remove the int/unsigned int option.  For this version
it'll simply give a warning, but it'll break next kernel version.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-12-19 10:34:41 +01:00
Dan Carpenter
27533df80e ALSA: cs5535 - Fix an endianness conversion
desc->size is supposed to be a le16 type.  On a big endian system the
current code will set ->size to zero.  We fixed a similar bug
on the next line but missed this one.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-21 12:03:55 +01:00
Paul Gortmaker
65a772172b sound: fix drivers needing module.h not moduleparam.h
The implicit presence of module.h lured several users into
incorrectly thinking that they only needed/used modparam.h
but once we clean up the module.h presence, these will show
up as build failures, so fix 'em now.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-31 19:31:19 -04:00
Takashi Iwai
7d339ae997 Merge branch 'topic/misc' into for-linus 2011-07-22 08:43:24 +02:00
Takashi Iwai
71276410e1 ALSA: cs5535 - Fix invalid big-endian conversions
Fix the wrongly converted short values:
  sound/pci/cs5535audio/cs5535audio_pcm.c:152: warning: large integer implicitly truncated to unsigned type
  sound/pci/cs5535audio/cs5535audio_pcm.c:160: warning: large integer implicitly truncated to unsigned type

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-30 12:35:45 +02:00
Takashi Iwai
934c2b6d0c ALSA: use KBUILD_MODNAME for request_irq argument in sound/pci/*
The name argument of request_irq() appears in /proc/interrupts, and
it's quite ugly when the name entry contains a space or special letters.
In general, it's simpler and more readable when the module name appears
there, so let's replace all entries with KBUILD_MODNAME.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-10 16:36:37 +02:00
Takashi Iwai
3733e424c4 ALSA: Use KBUILD_MODNAME for pci_driver.name entries
The convention for pci_driver.name entry in kernel drivers seem to be
the module name or equivalent ones.  But, so far, almost all PCI sound
drivers use more verbose name like "ABC Xyz (12)", and these are fairly
confusing when appearing as a file name.

This patch converts the all pci_driver.name entries in sound/pci/* to
use KBUILD_MODNAME for more unified appearance.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-10 16:20:20 +02:00
Jon Mason
1d3c16a818 PCI: make pci_restore_state return void
pci_restore_state only ever returns 0, thus there is no benefit in
having it return any value.  Also, a large majority of the callers do
not check the return code of pci_restore_state.  Make the
pci_restore_state a void return and avoid the overhead.

Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Jon Mason <jon.mason@exar.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-12-23 12:53:09 -08:00
Tejun Heo
5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00
Alexey Dobriyan
cebe41d4b8 sound: use DEFINE_PCI_DEVICE_TABLE
Use DEFINE_PCI_DEVICE_TABLE() to make PCI device ids go to
.devinit.rodata section, so they can be discarded in some cases,
and make them const.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-02-09 11:08:33 +01:00
Andres Salomon
3c55494670 ALSA: cs5535audio: free OLPC quirks from reliance on MGEODE_LX cpu optimization
Previously, OLPC support for the mic extensions was only enabled in the
ALSA driver if CONFIG_OLPC and CONFIG_MGEODE_LX were both set.  This was
because the old geode GPIO code was written in a manner that assumed
CONFIG_MGEODE_LX.  With the new cs553x-gpio driver, this is no longer the
case; as such, we can drop the requirement on CONFIG_MGEODE_LX and instead
include a requirement on GPIOLIB.

We use the generic GPIO API rather than the cs553x-specific API.

Signed-off-by: Andres Salomon <dilinger@collabora.co.uk>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Jordan Crouse <jordan@cosmicpenguin.net>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 08:53:27 -08:00
Yang Hongyang
284901a90a dma-mapping: replace all DMA_32BIT_MASK macro with DMA_BIT_MASK(32)
Replace all DMA_32BIT_MASK macro with DMA_BIT_MASK(32)

Signed-off-by: Yang Hongyang<yanghy@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-07 08:31:11 -07:00
Takashi Iwai
e0d2054fd3 Merge branch 'topic/misc' into for-linus 2009-03-24 00:35:50 +01:00
Takashi Iwai
ee419653a3 ALSA: Fix missing KERN_* prefix to printk in sound/pci
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-02-05 16:11:31 +01:00
Takashi Iwai
e58de7baf7 ALSA: Convert to snd_card_create() in sound/pci/*
Convert from snd_card_new() to the new snd_card_create() function
in sound/pci/*.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-01-12 15:20:55 +01:00
Takashi Iwai
f144b7f667 ALSA: cs5535 - Make OLPC-stuff depending on MGEODE_LX
The GPIO stuff for OLPC in cs5535audio_olpc.c is implemented only for
Geode-LX, and enabled only when CONFIG_MGEODE_LX=y.  Without this
config option, the driver gets build errors.

This patch adds a workaround to make it dependent on CONFIG_MGEODE_LX.

Ideally, the OLPC-GPIO stuff should be implemented in a way
independent from CPU type selection...

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-12-10 17:23:24 +01:00
Andres Salomon
0fb497f5b6 ALSA: cs5535audio: ensure MIC Bias/Analog Input bail if not on an OLPC machine
Signed-off-by: Andres Salomon <dilinger@debian.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-12-10 17:14:48 +01:00
Andres Salomon
b5ccc57b06 ALSA: cs5535audio: clean up OLPC code
- add copyright info to _olpc.c
 - minor layout fixes
 - make Makefile more concise
 - silence a warning

Signed-off-by: Andres Salomon <dilinger@debian.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-12-10 17:14:48 +01:00
Andres Salomon
c8f0eeebc1 ALSA: cs5535audio: turn off mic bias on OLPCs by default
Always turn off mic bias; the MIC LED should never come on when the
driver is first loaded.

Signed-off-by: Andres Salomon <dilinger@debian.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-12-10 17:14:47 +01:00
Andres Salomon
01da02419d ALSA: cs5535audio: for OLPC, default to Analog Input being off
Signed-off-by: Andres Salomon <dilinger@debian.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-12-10 17:14:46 +01:00
Andres Salomon
bf1e527835 ALSA: cs5535audio: rename V_REFOUT control to MIC Bias
This drops the AD1888 V_REFOUT control, and replaces it with a MIC Bias
Enable control.  It also moves the MIC bias enabling into a separate
function.

Signed-off-by: Andres Salomon <dilinger@debian.org>
2008-12-10 17:14:45 +01:00
Chris Ball
e463ae1d13 ALSA: cs5535audio: enable OLPC's V_REFOUT bias when recording
The OLPC has a privacy light hooked up in series with the microphone's
V_Ref bias.  We want to activate the bias while we are capturing audio.

Signed-off-by: Chris Ball <cjb@laptop.org>
Signed-off-by: Andres Salomon <dilinger@debian.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-12-10 17:14:45 +01:00
Andres Salomon
189d34e747 ALSA: cs5535audio: check OLPC's Analog Input status vis GPIO
Checking the HPF register is irrelevant; HPF is secondary to the AI mode.
Instead, check for Analog Input mode via GPIO.

Signed-off-by: Andres Salomon <dilinger@debian.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-12-10 17:14:44 +01:00
Andres Salomon
466ae3055b ALSA: cs5535audio: rename OLPC's analog input control && drop AD1888's HPF
Previously, we had two separate controls; there's no need to have AD1888's
HPF control, so drop it if we're on an OLPC machine.  Also, as per Arjun's
request, rename OLPC's Analog Input Switch control to "DC Mode Enable".

Signed-off-by: Andres Salomon <dilinger@debian.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-12-10 17:14:43 +01:00
Andres Salomon
d6276b7802 ALSA: cs5535audio: create function for setting OLPC's Analog Input mode
Clean this stuff up a bit..

Signed-off-by: Andres Salomon <dilinger@debian.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-12-10 17:14:42 +01:00
Andres Salomon
1e2232bc70 ALSA: cs5535audio: decouple HPF from V_REFOUT in OLPC code
We shouldn't be touching V_REFOUT when we toggle HPF/analog input, so just
drop that code.

Signed-off-by: Andres Salomon <dilinger@debian.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-12-10 17:14:42 +01:00
Andres Salomon
b91254e75c ALSA: cs5535audio: drop ec_analog_input flag for OLPC stuff
This is no longer necessary, as we're no longer doing indexed i/o commands.

Signed-off-by: Andres Salomon <dilinger@debian.org>
2008-12-10 17:14:41 +01:00
Andres Salomon
3556d18465 ALSA: cs5535audio: invert EAPD for OLPC (newer than B3)
Fix an audible pop described in <http://dev.laptop.org/ticket/977>.  Originally
based upon fixes by Mitch Bradley and Chris Ball.

Signed-off-by: Andres Salomon <dilinger@debian.org>
2008-12-10 17:14:40 +01:00
Jordan Crouse
c8974be546 ALSA: cs5535audio: Use OLPC/Geode basic infrastructure
Use basic infrastructure code; geode_gpio* (rather than indexed i/o
EC access), and do an OLPC machine check in olpc_quirk.

[dilinger@debian.org: don't return failure in olpc_quirks if !OLPC]
[dilinger@debian.org: drop the <B2 workarounds; those machines are EOL'd]

Signed-off-by: Jordan Crouse <jordan.crouse@amd.com>
Signed-off-by: Andres Salomon <dilinger@debian.org>
2008-12-10 17:14:39 +01:00
Jaya Kumar
57d4bf6d8e ALSA: cs5535audio: OLPC analog input support
This is a 2nd cut at adding support for OLPC analog input.

Signed-off-by: Jaya Kumar <jayakumar.lkml@gmail.com>
Signed-off-by: Andres Salomon <dilinger@debian.org>
2008-12-10 17:14:39 +01:00
Andres Salomon
b6c52a2cdb ALSA: cs5535audio: suspend/resume callbacks are only defined with CONFIG_PM
snd_cs5535audio_suspend and snd_cs5535audio_resume are only defined when
CONFIG_PM is set; make that clear in the header file.

Signed-off-by: Andres Salomon <dilinger@debian.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-12-10 17:14:38 +01:00
Jaya Kumar
b035ce0f26 ALSA: cs5535audio: turn off PCM properly if closing the audio device
As per <http://dev.laptop.org/ticket/1420>, we need to properly turn off
the PCM if we're closing the device in order to save power.  This also
causes the MIC led to turn off properly.

Signed-off-by: Jaya Kumar <jayakumar.lkml@gmail.com>
Signed-off-by: Andres Salomon <dilinger@debian.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-12-10 17:14:37 +01:00
Randy Dunlap
5be55be58c [ALSA] fix cs5535 section mismatch
snd_cs5535audio_mixer() is only called by __devinit snd_cs5535audio_probe(),
so the mixer function can also be __devinit.
WARNING: vmlinux.o(.text+0xfdbba0): Section mismatch: reference to .init.data:ac97_quirks (between 'snd_cs5535audio_mixer' and 'process_bm0_irq')

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:30:12 +01:00
Takashi Iwai
0de27c10d3 [ALSA] cs5535audio - Fix available sample rates
The available sample rates on CS5535 depend on AC97 codec chip.
Set the additional hw params limit.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:30:09 +01:00
Takashi Iwai
9004acc70e [ALSA] Remove sound/driver.h
This header file exists only for some hacks to adapt alsa-driver
tree.  It's useless for building in the kernel.  Let's move a few
lines in it to sound/core.h and remove it.
With this patch, sound/driver.h isn't removed but has just a single
compile warning to include it.  This should be really killed in
future.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:29:48 +01:00
Andres Salomon
4ea2416398 [ALSA] cs5535audio: drop unused bus master stuff
We really only care about the first two bus masters (playback and capture).
There's no need to have unused BM code lying around, so let's get rid of it.
If for some reason we trigger an IRQ for some BM that we're not using.. well,
that warrants spitting out an error message (imo).

Signed-off-by: Andres Salomon <dilinger@debian.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16 15:59:54 +02:00
Andres Salomon
506ea68cd9 [ALSA] cs5535audio: fix ACC_BM[x]_CMD register handling
According to 6.3.2.7 of the cs5535/cs5536 data sheets, the ACC_BM[x]_CMD
registers are only 8 bits wide.  This driver treats them as 32 bits wide,
and also has bits in the wrong place.  Simple fix to the definitions.

Signed-off-by: Andres Salomon <dilinger@debian.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16 15:59:53 +02:00
Andres Salomon
1caae3682e [ALSA] cs5535audio: update PCI device handling in suspend/resume
Save the PCI state before disabling the device, and add some error checking.

Signed-off-by: Andres Salomon <dilinger@debian.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16 15:59:53 +02:00
Andres Salomon
222fa0b0d2 [ALSA] cs5535audio: fix PRD register save/restore power management race
In the suspend path, we currently save the PRD registers and then disable DMA.
This is racy; the sound hardware might update the PRD register as it finishes
processing some DMA pages between when we've saved the PRD registers and
when DMA actually gets disabled.  Furthermore, we actively check whether or
not DMA is enabled before saving PRD registers; there's no reason to do that,
as the PRD registers should not update when we twiddle the ACC_BM[x]_CMD
register(s).  Worst case, we save the PRD registers twice; even powering
down the ACC shouldn't mess with the PRD registers (according to the 5536
data sheet, section 5.3.7.4, power-down procedure).  This patch reworks
all that to first disable DMA, and then save PRD registers.

Signed-off-by: Andres Salomon <dilinger@debian.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16 15:59:52 +02:00
Andres Salomon
7abcacb09a [ALSA] cs5535audio: correctly set dma->substream
We're never actually setting dma->substream to the current substream; that
means the dma->substream checks that we do in the suspend/resume path
are never satisfied, and the PRD registers are never correctly managed.  This
changes it so that we set the substream when constructing the specific
bus master DMA, and unsetting it when we tear down the BM's DMA.

Signed-off-by: Andres Salomon <dilinger@debian.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16 15:59:51 +02:00
Clemens Ladisch
b83f346bc4 [ALSA] remove incorrect usage of SNDRV_PCM_INFO_SYNC_START and snd_pcm_set_sync()
Set the SNDRV_PCM_INFO_SYNC_START flag and the substream's sync ID
(only) if the substream actually can be linked to another one.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16 15:58:52 +02:00
Takashi Iwai
52a6db82ef [ALSA] Clean up Makefile
Clean up Makefile using xxx- style instead of
ifeq(CONFIG_XXX,y).

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16 15:58:05 +02:00
Takashi Iwai
437a5a4606 [ALSA] Remove IRQF_DISABLED for shared PCI irqs
Fix IRQ flags for PCI devices.
The shared IRQs for PCI devices shouldn't be allocated with
IRQF_DISABLED.  Also, when MSI is enabled, IRQF_SHARED shouldn't
be used.
The patch removes unnecessary cast in request_irq and free_irq,
too.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2006-12-20 08:55:57 +01:00
Takashi Iwai
30b35399ce [ALSA] Various fixes for suspend/resume of ALSA PCI drivers
- Check the return value of pci_enable_device() and request_irq()
  in the suspend.  If any error occurs there, disable the device
  using snd_card_disconnect().
- Call pci_set_power_state() properly with pci_choose_state().
- Fix the order to call pci_set_power_state().
- Removed obsolete house-made PM codes in some drivers.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2006-10-22 10:51:10 +02:00
David Howells
7d12e780e0 IRQ: Maintain regs pointer globally rather than passing to IRQ handlers
Maintain a per-CPU global "struct pt_regs *" variable which can be used instead
of passing regs around manually through all ~1800 interrupt handlers in the
Linux kernel.

The regs pointer is used in few places, but it potentially costs both stack
space and code to pass it around.  On the FRV arch, removing the regs parameter
from all the genirq function results in a 20% speed up of the IRQ exit path
(ie: from leaving timer_interrupt() to leaving do_IRQ()).

Where appropriate, an arch may override the generic storage facility and do
something different with the variable.  On FRV, for instance, the address is
maintained in GR28 at all times inside the kernel as part of general exception
handling.

Having looked over the code, it appears that the parameter may be handed down
through up to twenty or so layers of functions.  Consider a USB character
device attached to a USB hub, attached to a USB controller that posts its
interrupts through a cascaded auxiliary interrupt controller.  A character
device driver may want to pass regs to the sysrq handler through the input
layer which adds another few layers of parameter passing.

I've build this code with allyesconfig for x86_64 and i386.  I've runtested the
main part of the code on FRV and i386, though I can't test most of the drivers.
I've also done partial conversion for powerpc and MIPS - these at least compile
with minimal configurations.

This will affect all archs.  Mostly the changes should be relatively easy.
Take do_IRQ(), store the regs pointer at the beginning, saving the old one:

	struct pt_regs *old_regs = set_irq_regs(regs);

And put the old one back at the end:

	set_irq_regs(old_regs);

Don't pass regs through to generic_handle_irq() or __do_IRQ().

In timer_interrupt(), this sort of change will be necessary:

	-	update_process_times(user_mode(regs));
	-	profile_tick(CPU_PROFILING, regs);
	+	update_process_times(user_mode(get_irq_regs()));
	+	profile_tick(CPU_PROFILING);

I'd like to move update_process_times()'s use of get_irq_regs() into itself,
except that i386, alone of the archs, uses something other than user_mode().

Some notes on the interrupt handling in the drivers:

 (*) input_dev() is now gone entirely.  The regs pointer is no longer stored in
     the input_dev struct.

 (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking.  It does
     something different depending on whether it's been supplied with a regs
     pointer or not.

 (*) Various IRQ handler function pointers have been moved to type
     irq_handler_t.

Signed-Off-By: David Howells <dhowells@redhat.com>
(cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 15:10:12 +01:00