Commit Graph

17 Commits

Author SHA1 Message Date
David R. Bild
e0367a6156 kbuild: clear KBUILD_SRC when calling 'make' in RPM spec
'make rpm-pkg' and 'make binrpm-pkg' fail when the kernel source is
read-only.  Specifically, when the RPM spec generated by
scripts/package/mkspec is run, KBUILD_SRC happens to be set to the
source location and thus the invocation of 'make headers_install'
fails when an internal call to 'filechk' tries to write a file into
the source tree.

The fix is to clear KBUILD_SRC for the 'make headers_install'
invocation in the spec file, as is already done for the 'make
modules_install' invocation.

Signed-off-by: David R. Bild <drbild@umich.edu>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2013-02-22 10:57:32 +01:00
Arun Sharma
0bd41dfc9f kbuild: Create a kernel-headers RPM
To compile binaries which depend on new kernel interfaces, we need a
kernel-headers RPM

Signed-off-by: Arun Sharma <asharma@fb.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2011-05-24 18:28:29 +02:00
Arun Sharma
e1287eb891 Replace '-' in kernel version with '_'
Removing the '-' results in hard to read filenames such as:
kernel-2.6.35.2000042g76e4caf-28.x86_64.rpm

kernel-2.6.35.2_000042_g76e4caf-28.x86_64.rpm is easier to
read.

Signed-off-by: Arun Sharma <asharma@fb.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2011-05-04 23:07:48 +02:00
Linus Torvalds
2301b65b86 Merge branch 'packaging' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6
* 'packaging' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6:
  scripts/package: don't break if %{_smp_mflags} isn't set
  kbuild, deb-pkg: Check if KBUILD_IMAGE exists before copying it
2010-10-28 16:19:38 -07:00
Nishanth Aravamudan
c2d5a7300d scripts/package: don't break if %{_smp_mflags} isn't set
Same fix as in 13797b77d4 is needed for the "new"
line invoking _smp_mflags for modules_install. Without the fix, `make
binrpm-pkg` fails with:

+ make '%{_smp_mflags}' KBUILD_SRC= modules_install
make[2]: warning: jobserver unavailable: using -j1.  Add `+' to parent make rule.
make[2]: *** No rule to make target `%{_smp_mflags}'.  Stop.
error: Bad exit status from /var/tmp/rpm-tmp.8S9B9e (%install)

Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-10-14 00:01:16 +02:00
Linus Torvalds
1f73897861 Merge branch 'for-35' of git://repo.or.cz/linux-kbuild
* 'for-35' of git://repo.or.cz/linux-kbuild: (81 commits)
  kbuild: Revert part of e8d400a to resolve a conflict
  kbuild: Fix checking of scm-identifier variable
  gconfig: add support to show hidden options that have prompts
  menuconfig: add support to show hidden options which have prompts
  gconfig: remove show_debug option
  gconfig: remove dbg_print_ptype() and dbg_print_stype()
  kconfig: fix zconfdump()
  kconfig: some small fixes
  add random binaries to .gitignore
  kbuild: Include gen_initramfs_list.sh and the file list in the .d file
  kconfig: recalc symbol value before showing search results
  .gitignore: ignore *.lzo files
  headerdep: perlcritic warning
  scripts/Makefile.lib: Align the output of LZO
  kbuild: Generate modules.builtin in make modules_install
  Revert "kbuild: specify absolute paths for cscope"
  kbuild: Do not unnecessarily regenerate modules.builtin
  headers_install: use local file handles
  headers_check: fix perl warnings
  export_report: fix perl warnings
  ...
2010-06-01 08:55:52 -07:00
Gilles Espinasse
f77f13e22d Fix comment and Kconfig typos for 'require' and 'fragment'
Signed-off-by: Gilles Espinasse <g.esp@free.fr>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-03-29 15:41:47 +02:00
John Saalwaechter
880df92fa0 scripts: use %_tmppath in "make rpm-pkg"
The mkspec script hardcodes "/var/tmp" into the generated rpm spec file's
BuildRoot. The user, however, may have a custom setting for %_tmppath,
which should be used in BuildRoot.  This patch changes mkspec's
BuildRoot output to appropriately use %_tmppath.

Signed-off-by: John Saalwaechter <saalwaechter@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-02-02 14:33:56 +01:00
Frans Pop
db9038c89d kbuild: fix the binrpm-pkg target to work with KBUILD_OUTPUT set
The binrpm-pkg target (binary RPM only) fails when called with
KBUILD_OUTPUT set. This patch makes it work.

For the rpm-pkg target (source + binary RPM), building with
KBUILD_OUTPUT set is not possible and also not needed as the
actual build is done in a temporary directory anyway, so check
that KBUILD_OUTPUT is not set in that case to avoid later errors.

Signed-off-by: Frans Pop <elendil@planet.nl>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-10-11 23:21:24 +02:00
Josh Hunt
a2ebcc7a86 kbuild: fix mkspec to cleanup RPM_BUILD_ROOT
The contents of the %clean section in mkspec is currently commented
out leaving RPM_BUILD_ROOT and its contents on the build machine.
This patch removes it once the rpm build process is complete.

Signed-off-by: Josh Hunt <josh@scalex86.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-03-07 13:53:21 +01:00
Josh Hunt
fc370ecfdb kbuild: add vmlinux to kernel rpm
We are building an automated system to test kernels weekly and need to
provide an rpm to our QA dept.  We would like to use the ability to create
kernel rpms already in the kernel's Makefile, but need the vmlinux file
included in the rpm for later debugging.

This patch adds a compressed vmlinux to the kernel rpm when doing a
make rpm-pkg or binrpm-pkg and upon install places the vmlinux file in /boot.

Signed-off-by: Josh Hunt <josh@scalex86.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-02-15 12:50:08 +01:00
Jeremy Kerr
13797b77d4 scripts/package: don't break if %{_smp_mflags} isn't set
Currently, if we do a 'make rpm-pkg' without the _smp_mflags rpm macro
defined, the build fails with:

  [snip]
  Executing(%build): /bin/bash -e /var/tmp/rpm-tmp.67959
  + umask 022
  + cd /home/jk/devel/kernel-snapshot/rpm/BUILD
  + cd kernel-2.6.26
  + make clean
  + make '%{_smp_mflags}'
  make[3]: *** No rule to make target `%{_smp_mflags}'.  Stop.
  error: Bad exit status from /var/tmp/rpm-tmp.67959 (%build)

This change uses the 'null if not set' reference to the _smp_mflags
macro instead.

Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-10-29 22:02:08 +01:00
Evgeniy Manachkin
46dca86cb9 kbuild: mkspec - fix build rpm
This is patch to fix incorrect mkspec script to make rpm correctly at 2.6.27 vanilla kernel.
This is regression in 2.6.27. 2.6.26 make rpm work good.
In 2.6.27 'make rpm' say error from rpmbuild "Many unpacked files (*.fw)."

Signed-off-by: Evgeniy Manachkin <sfstudio@mail.ru>
Acked-by: Alan Cox <alan@redhat.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Stable <stable@kernel.org>
2008-10-29 22:02:06 +01:00
Rolf Eike Beer
a5fa393b54 kbuild: fix "mkdir -p" usage in scripts/package/mkspec
"mkdir -p" does not only mean not to complain if the directory already
exists, but also to create the parent directories if needed. This patch
removes "lib" from the list of directories to create as we will also create
"lib/modules".

Signed-off-by: Rolf Eike Beer <eike-kernel@sf-tec.de>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2006-09-25 10:55:44 +02:00
Mike Wolf
1a0f3d422b kbuild: fix make rpm for powerpc
The default target for most powerpc platforms is zImage.  The
zImage however is in arch/powerpc/boot and the mkspec script
was set up to get the kernel from the top level of the kernel
tree.  This patch copies vmlinux to arch/powerpc/boot and then
copies the kernel to the tmp directory so the rpm can be made.

Signed-off-by: Mike Wolf <mjw@us.ibm.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2006-06-08 20:18:49 +02:00
Greg Edwards
d2cb1a95c5 [PATCH] kbuild: add ia64 support to rpm Makefile target
On ia64, only the EFI (fat) partition is available to boot from.  The rpm
needs to install the kernel under /boot/efi to be useable on ia64.

Signed-off-by: Greg Edwards <edwardsg@sgi.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2005-07-13 21:08:33 +00:00
Linus Torvalds
1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00