Commit Graph

42 Commits

Author SHA1 Message Date
Tejun Heo
c5f66e99b7 timer: Implement TIMER_IRQSAFE
Timer internals are protected with irq-safe locks but timer execution
isn't, so a timer being dequeued for execution and its execution
aren't atomic against IRQs.  This makes it impossible to wait for its
completion from IRQ handlers and difficult to shoot down a timer from
IRQ handlers.

This issue caused some issues for delayed_work interface.  Because
there's no way to reliably shoot down delayed_work->timer from IRQ
handlers, __cancel_delayed_work() can't share the logic to steal the
target delayed_work with cancel_delayed_work_sync(), and can only
steal delayed_works which are on queued on timer.  Similarly, the
pending mod_delayed_work() can't be used from IRQ handlers.

This patch adds a new timer flag TIMER_IRQSAFE, which makes the timer
to be executed without enabling IRQ after dequeueing such that its
dequeueing and execution are atomic against IRQ handlers.

This makes it safe to wait for the timer's completion from IRQ
handlers, for example, using del_timer_sync().  It can never be
executing on the local CPU and if executing on other CPUs it won't be
interrupted until done.

This will enable simplifying delayed_work cancel/mod interface.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: torvalds@linux-foundation.org
Cc: peterz@infradead.org
Link: http://lkml.kernel.org/r/1344449428-24962-5-git-send-email-tj@kernel.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2012-08-21 16:28:31 +02:00
Tejun Heo
fc683995a6 timer: Clean up timer initializers
Over time, timer initializers became messy with unnecessarily
duplicated code which are inconsistently spread across timer.h and
timer.c.

This patch cleans up timer initializers.

* timer.c::__init_timer() is renamed to do_init_timer().

* __TIMER_INITIALIZER() added.  It takes @flags and all initializers
  are wrappers around it.

* init_timer[_on_stack]_key() now take @flags.

* __init_timer[_on_stack]() added.  They take @flags and all init
  macros are wrappers around them.

* __setup_timer[_on_stack]() added.  It uses __init_timer() and takes
  @flags.  All setup macros are wrappers around the two.

Note that this patch doesn't add missing init/setup combinations -
e.g. init_timer_deferrable_on_stack().  Adding missing ones is
trivial.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: torvalds@linux-foundation.org
Cc: peterz@infradead.org
Link: http://lkml.kernel.org/r/1344449428-24962-4-git-send-email-tj@kernel.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2012-08-21 16:28:30 +02:00
Tejun Heo
5a9af38d05 timer: Relocate declarations of init_timer_on_stack_key()
init_timer_on_stack_key() is used by init macro definitions.  Move
init_timer_on_stack_key() and destroy_timer_on_stack() declarations
above init macro defs.  This will make the next init cleanup patch
easier to read.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: torvalds@linux-foundation.org
Cc: peterz@infradead.org
Link: http://lkml.kernel.org/r/1344449428-24962-3-git-send-email-tj@kernel.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2012-08-21 16:28:30 +02:00
Tejun Heo
e52b1db37b timer: Generalize timer->base flags handling
To prepare for addition of another flag, generalize timer->base flags
handling.

* Rename from TBASE_*_FLAG to TIMER_* and make them LU constants.

* Define and use TIMER_FLAG_MASK for flags masking so that multiple
  flags can be handled correctly.

* Don't dereference timer->base directly even if
  !tbase_get_deferrable().  All two such places are already passed in
  @base, so use it instead.

* Make sure tvec_base's alignment is large enough for timer->base
  flags using BUILD_BUG_ON().

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: torvalds@linux-foundation.org
Cc: peterz@infradead.org
Link: http://lkml.kernel.org/r/1344449428-24962-2-git-send-email-tj@kernel.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2012-08-21 16:28:30 +02:00
Yong Zhang
6f1bc451e6 timer: Make try_to_del_timer_sync() the same on SMP and UP
On UP try_to_del_timer_sync() is mapped to del_timer() which does not
take the running timer callback into account, so it has different
semantics.

Remove the SMP dependency of try_to_del_timer_sync() by using
base->running_timer in the UP case as well.

[ tglx: Removed set_running_timer() inline and tweaked the changelog ]

Signed-off-by: Yong Zhang <yong.zhang0@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2010-10-22 14:46:25 +02:00
Phil Carmody
dd6414b50f timer: Permit statically-declared work with deferrable timers
Currently, you have to just define a delayed_work uninitialised, and then
initialise it before first use.  That's a tad clumsy.  At risk of playing
mind-games with the compiler, fooling it into doing pointer arithmetic
with compile-time-constants, this lets clients properly initialise delayed
work with deferrable timers statically.

This patch was inspired by the issues which lead Artem Bityutskiy to
commit 8eab945c56 ("sunrpc: make the cache cleaner workqueue
deferrable").

Signed-off-by: Phil Carmody <ext-phil.2.carmody@nokia.com>
Acked-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Cc: Arjan van de Ven <arjan@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2010-10-21 17:30:06 +02:00
Changli Gao
aaabe31c25 timer: Initialize the field slack of timer_list
TIMER_INITIALIZER() should initialize the field slack of timer_list as
__init_timer() does.

Signed-off-by: Changli Gao <xiaosuo@gmail.com>
Cc: Arjan van de Ven <arjan@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2010-10-21 17:30:06 +02:00
Richard Kennedy
d0959024d8 timer_list: Remove alignment padding on 64 bit when CONFIG_TIMER_STATS
Reorder struct timer_list to remove 8 bytes of alignment padding on 64
bit builds when CONFIG_TIMER_STATS is selected.

timer_list is widely used across the kernel so many structures will
benefit and shrink in size.

For example, with my config on x86_64
	per_cpu_dm_data shrinks from 136 to 128 bytes
and
	ahci_port_priv shrinks from 1032 to 968 bytes.

Signed-off-by: Richard Kennedy <richard@rsk.demon.co.uk>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2010-10-21 17:30:06 +02:00
Jesse Barnes
8cadd2831b timer: add on-stack deferrable timer interfaces
In some cases (for instance with kernel threads) it may be desireable to
use on-stack deferrable timers to get their power saving benefits.  Add
interfaces to support this for the IPS driver.

Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2010-08-03 09:48:45 -04:00
Arjan van de Ven
3bbb9ec946 timers: Introduce the concept of timer slack for legacy timers
While HR timers have had the concept of timer slack for quite some time
now, the legacy timers lacked this concept, and had to make do with
round_jiffies() and friends.

Timer slack is important for power management; grouping timers reduces the
number of wakeups which in turn reduces power consumption.

This patch introduces timer slack to the legacy timers using the following
pieces:
* A slack field in the timer struct
* An api (set_timer_slack) that callers can use to set explicit timer slack
* A default slack of 0.4% of the requested delay for callers that do not set
  any explicit slack
* Rounding code that is part of mod_timer() that tries to
  group timers around jiffies values every 'power of two'
  (so quick timers will group around every 2, but longer timers
  will group around every 4, 8, 16, 32 etc)

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Cc: johnstul@us.ibm.com
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2010-04-06 21:50:02 +02:00
Randy Dunlap
e500011ffa timers: Drop a function prototype
Drop prototype for non-existent next_timer_interrupt() function.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: akpm <akpm@linux-foundation.org>
LKML-Reference: <4A9ADEC0.70306@oracle.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-08-30 22:26:34 +02:00
Heiko Carstens
507e123151 timer stats: Optimize by adding quick check to avoid function calls
When the kernel is configured with CONFIG_TIMER_STATS but timer
stats are runtime disabled we still get calls to
__timer_stats_timer_set_start_info which initializes some
fields in the corresponding struct timer_list.

So add some quick checks in the the timer stats setup functions
to avoid function calls to __timer_stats_timer_set_start_info
when timer stats are disabled.

In an artificial workload that does nothing but playing ping
pong with a single tcp packet via loopback this decreases cpu
consumption by 1 - 1.5%.

This is part of a modified function trace output on SLES11:

 perl-2497  [00] 28630647177732388 [+  125]: sk_reset_timer <-tcp_v4_rcv
 perl-2497  [00] 28630647177732513 [+  125]: mod_timer <-sk_reset_timer
 perl-2497  [00] 28630647177732638 [+  125]: __timer_stats_timer_set_start_info <-mod_timer
 perl-2497  [00] 28630647177732763 [+  125]: __mod_timer <-mod_timer
 perl-2497  [00] 28630647177732888 [+  125]: __timer_stats_timer_set_start_info <-__mod_timer
 perl-2497  [00] 28630647177733013 [+   93]: lock_timer_base <-__mod_timer

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Mustafa Mesanovic <mustafa.mesanovic@de.ibm.com>
Cc: Arjan van de Ven <arjan@infradead.org>
LKML-Reference: <20090623153811.GA4641@osiris.boeblingen.de.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-24 11:15:09 +02:00
Arun R Bharadwaj
597d027573 timers: Framework for identifying pinned timers
* Arun R Bharadwaj <arun@linux.vnet.ibm.com> [2009-04-16 12:11:36]:

This patch creates a new framework for identifying cpu-pinned timers
and hrtimers.

This framework is needed because pinned timers are expected to fire on
the same CPU on which they are queued. So it is essential to identify
these and not migrate them, in case there are any.

For regular timers, the currently existing add_timer_on() can be used
queue pinned timers and subsequently mod_timer_pinned() can be used
to modify the 'expires' field.

For hrtimers, new modes HRTIMER_ABS_PINNED and HRTIMER_REL_PINNED are
added to queue cpu-pinned hrtimer.

[ tglx: use .._PINNED mode argument instead of creating tons of new
functions ]

Signed-off-by: Arun R Bharadwaj <arun@linux.vnet.ibm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-05-13 16:52:42 +02:00
Linus Torvalds
c4e1aa67ed Merge branch 'locking-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'locking-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (33 commits)
  lockdep: fix deadlock in lockdep_trace_alloc
  lockdep: annotate reclaim context (__GFP_NOFS), fix SLOB
  lockdep: annotate reclaim context (__GFP_NOFS), fix
  lockdep: build fix for !PROVE_LOCKING
  lockstat: warn about disabled lock debugging
  lockdep: use stringify.h
  lockdep: simplify check_prev_add_irq()
  lockdep: get_user_chars() redo
  lockdep: simplify get_user_chars()
  lockdep: add comments to mark_lock_irq()
  lockdep: remove macro usage from mark_held_locks()
  lockdep: fully reduce mark_lock_irq()
  lockdep: merge the !_READ mark_lock_irq() helpers
  lockdep: merge the _READ mark_lock_irq() helpers
  lockdep: simplify mark_lock_irq() helpers #3
  lockdep: further simplify mark_lock_irq() helpers
  lockdep: simplify the mark_lock_irq() helpers
  lockdep: split up mark_lock_irq()
  lockdep: generate usage strings
  lockdep: generate the state bit definitions
  ...
2009-03-30 17:17:35 -07:00
Ingo Molnar
74019224ac timers: add mod_timer_pending()
Impact: new timer API

Based on an idea from Martin Josefsson with the help of
Patrick McHardy and Stephen Hemminger:

introduce the mod_timer_pending() API which is a mod_timer()
offspring that is an invariant on already removed timers.

(regular mod_timer() re-activates non-pending timers.)

This is useful for the networking code in that it can
allow unserialized mod_timer_pending() timer-forwarding
calls, but a single del_timer*() will stop the timer
from being reactivated again.

Also while at it:

- optimize the regular mod_timer() path some more, the
  timer-stat and a debug check was needlessly duplicated
  in __mod_timer().

- make the exports come straight after the function, as
  most other exports in timer.c already did.

- eliminate __mod_timer() as an external API, change the
  users to mod_timer().

The regular mod_timer() code path is not impacted
significantly, due to inlining optimizations and due to
the simplifications.

Based-on-patch-from: Stephen Hemminger <shemminger@vyatta.com>
Acked-by: Stephen Hemminger <shemminger@vyatta.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Patrick McHardy <kaber@trash.net>
Cc: netdev@vger.kernel.org
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-18 19:26:33 +01:00
Johannes Berg
6f2b9b9a9d timer: implement lockdep deadlock detection
This modifies the timer code in a way to allow lockdep to detect
deadlocks resulting from a lock being taken in the timer function
as well as around the del_timer_sync() call.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
2009-02-14 23:25:52 +01:00
Alan Stern
9c133c469d Add round_jiffies_up and related routines
This patch (as1158b) adds round_jiffies_up() and friends.  These
routines work like the analogous round_jiffies() functions, except
that they will never round down.

The new routines will be useful for timeouts where we don't care
exactly when the timer expires, provided it doesn't expire too soon.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-11-06 08:42:48 +01:00
Thomas Gleixner
c6f3a97f86 debugobjects: add timer specific object debugging code
Add calls to the generic object debugging infrastructure and provide fixup
functions which allow to keep the system alive when recoverable problems have
been detected by the object debugging core code.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Ingo Molnar <mingo@elte.hu>
Cc: Greg KH <greg@kroah.com>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30 08:29:53 -07:00
Li Zefan
6d141c3ff6 workqueue: make delayed_work_timer_fn() static
delayed_work_timer_fn() is a timer function, make it static.

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08 09:22:37 -08:00
Harvey Harrison
ec7015840a Remove fastcall from linux/include
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08 09:22:31 -08:00
Pavel Machek
a6fa8e5a61 time: clean hungarian notation from timers
Clean up hungarian notation from timer code.

Signed-off-by: Pavel Machek <pavel@suse.cz>
Cc: john stultz <johnstul@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:30:00 +01:00
Venki Pallipadi
c5c061b8f9 Add a flag to indicate deferrable timers in /proc/timer_stats
Add a flag in /proc/timer_stats to indicate deferrable timers.  This will
let developers/users to differentiate between types of tiemrs in
/proc/timer_stats.

Deferrable timer and normal timer will appear in /proc/timer_stats as below.
  10D,     1 swapper          queue_delayed_work_on (delayed_work_timer_fn)
   10,     1 swapper          queue_delayed_work_on (delayed_work_timer_fn)

Also version of timer_stats changes from v0.1 to v0.2

Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: john stultz <johnstul@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-16 09:05:45 -07:00
Robert P. J. Day
0a3021f4e2 Remove unnecessary includes of spinlock.h under include/linux
Remove the obviously unnecessary includes of <linux/spinlock.h> under the
include/linux/ directory, and fix the couple errors that are introduced as
a result of that.

Signed-off-by: Robert P. J. Day <rpjday@mindspring.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-16 09:05:42 -07:00
Thomas Gleixner
eaad084bb0 NOHZ: prevent multiplication overflow - stop timer for huge timeouts
get_next_timer_interrupt() returns a delta of (LONG_MAX > 1) in case
there is no timer pending. On 64 bit machines this results in a
multiplication overflow in tick_nohz_stop_sched_tick().

Reported by: Dave Miller <davem@davemloft.net>

Make the return value a constant and limit the return value to a 32 bit
value.

When the max timeout value is returned, we can safely stop the tick
timer device. The max jiffies delta results in a 12 days timeout for
HZ=1000.

In the long term the get_next_timer_interrupt() code needs to be
reworked to return ktime instead of jiffies, but we have to wait until
the last users of the original NO_IDLE_HZ code are converted.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-29 18:11:10 -07:00
Venki Pallipadi
6e453a6751 Add support for deferrable timers
Introduce a new flag for timers - deferrable: Timers that work normally
when system is busy.  But, will not cause CPU to come out of idle (just to
service this timer), when CPU is idle.  Instead, this timer will be
serviced when CPU eventually wakes up with a subsequent non-deferrable
timer.

The main advantage of this is to avoid unnecessary timer interrupts when
CPU is idle.  If the routine currently called by a timer can wait until
next event without any issues, this new timer can be used to setup timer
event for that routine.  This, with dynticks, allows CPUs to be lazy,
allowing them to stay in idle for extended period of time by reducing
unnecesary wakeup and thereby reducing the power consumption.

This patch:

Builds this new timer on top of existing timer infrastructure.  It uses
last bit in 'base' pointer of timer_list structure to store this deferrable
timer flag.  __next_timer_interrupt() function skips over these deferrable
timers when CPU looks for next timer event for which it has to wake up.

This is exported by a new interface init_timer_deferrable() that can be
called in place of regular init_timer().

[akpm@linux-foundation.org: Privatise a #define]
Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Dave Jones <davej@codemonkey.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08 11:15:05 -07:00
Ingo Molnar
82f67cd9fc [PATCH] Add debugging feature /proc/timer_stat
Add /proc/timer_stats support: debugging feature to profile timer expiration.
Both the starting site, process/PID and the expiration function is captured.
This allows the quick identification of timer event sources in a system.

Sample output:

# echo 1 > /proc/timer_stats
# cat /proc/timer_stats
Timer Stats Version: v0.1
Sample period: 4.010 s
  24,     0 swapper          hrtimer_stop_sched_tick (hrtimer_sched_tick)
  11,     0 swapper          sk_reset_timer (tcp_delack_timer)
   6,     0 swapper          hrtimer_stop_sched_tick (hrtimer_sched_tick)
   2,     1 swapper          queue_delayed_work_on (delayed_work_timer_fn)
  17,     0 swapper          hrtimer_restart_sched_tick (hrtimer_sched_tick)
   2,     1 swapper          queue_delayed_work_on (delayed_work_timer_fn)
   4,  2050 pcscd            do_nanosleep (hrtimer_wakeup)
   5,  4179 sshd             sk_reset_timer (tcp_write_timer)
   4,  2248 yum-updatesd     schedule_timeout (process_timeout)
  18,     0 swapper          hrtimer_restart_sched_tick (hrtimer_sched_tick)
   3,     0 swapper          sk_reset_timer (tcp_delack_timer)
   1,     1 swapper          neigh_table_init_no_netlink (neigh_periodic_timer)
   2,     1 swapper          e1000_up (e1000_watchdog)
   1,     1 init             schedule_timeout (process_timeout)
100 total events, 25.24 events/sec

[ cleanups and hrtimers support from Thomas Gleixner <tglx@linutronix.de> ]
[bunk@stusta.de: nr_entries can become static]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-16 08:13:59 -08:00
Thomas Gleixner
c9cb2e3d7c [PATCH] hrtimers: namespace and enum cleanup
- hrtimers did not use the hrtimer_restart enum and relied on the implict
  int representation. Fix the prototypes and the functions using the enums.
- Use seperate name spaces for the enumerations
- Convert hrtimer_restart macro to inline function
- Add comments

No functional changes.

[akpm@osdl.org: fix input driver]
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-16 08:13:58 -08:00
Thomas Gleixner
fd064b9b77 [PATCH] Extend next_timer_interrupt() to use a reference jiffie
For CONFIG_NO_HZ we need to calculate the next timer wheel event based on a
given jiffie value.  Extend the existing code to allow the extra 'now'
argument.  Provide a compability function for the existing implementations to
call the function with now == jiffies.  (This also solves the racyness of the
original code vs.  jiffies changing during the iteration.)

No functional changes to existing users of this infrastructure.

[ remove WARN_ON() that triggered on s390, by Carsten Otte <cotte@de.ibm.com> ]
[ made new helper static, Adrian Bunk <bunk@stusta.de> ]
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-16 08:13:58 -08:00
Robert P. J. Day
45f8bde0d0 [PATCH] fix various kernel-doc in header files
Fix a number of kernel-doc entries for header files in include/linux by
making sure they begin with the appropriate '/**' notation and use @var
notation.

Signed-off-by: Robert P. J. Day <rpjday@mindspring.com>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-01-26 13:51:00 -08:00
Arjan van de Ven
4c36a5dec2 [PATCH] round_jiffies infrastructure
Introduce a round_jiffies() function as well as a round_jiffies_relative()
function.  These functions round a jiffies value to the next whole second.
The primary purpose of this rounding is to cause all "we don't care exactly
when" timers to happen at the same jiffy.

This avoids multiple timers firing within the second for no real reason;
with dynamic ticks these extra timers cause wakeups from deep sleep CPU
sleep states and thus waste power.

The exact wakeup moment is skewed by the cpu number, to avoid all cpus from
waking up at the exact same time (and hitting the same lock/cachelines
there)

[akpm@osdl.org: fix variable type]
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-10 09:57:22 -08:00
David Woodhouse
62c4f0a2d5 Don't include linux/config.h from anywhere else in include/
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-04-26 12:56:16 +01:00
Oleg Nesterov
3691c5199e [PATCH] kill __init_timer_base in favor of boot_tvec_bases
Commit a4a6198b80:
	[PATCH] tvec_bases too large for per-cpu data

introduced "struct tvec_t_base_s boot_tvec_bases" which is visible at
compile time.  This means we can kill __init_timer_base and move
timer_base_s's content into tvec_t_base_s.

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-31 12:18:52 -08:00
Roman Zippel
05cfb614dd [PATCH] hrtimers: remove data field
The nanosleep cleanup allows to remove the data field of hrtimer.  The
callback function can use container_of() to get it's own data.  Since the
hrtimer structure is anyway embedded in other structures, this adds no
overhead.

Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-26 08:57:03 -08:00
Andrzej Zaborowski
13fce80629 Fix simple typos
This corrects some trivial errors in ARM docs and comments,

Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-03-24 18:13:37 +01:00
Thomas Gleixner
2ff678b8da [PATCH] hrtimer: switch itimers to hrtimer
switch itimers to a hrtimers-based implementation

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-10 08:01:38 -08:00
Andrew Morton
15d2bace5e [PATCH] add_timer() of a pending timer is illegal
In the recent timer rework we lost the check for an add_timer() of an
already-pending timer.  That check was useful for networking, so put it back.

Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30 17:37:21 -08:00
Andrew Morton
dfc4f94d2f [PATCH] remove timer debug field
Remove timer_list.magic and associated debugging code.

I originally added this when a spinlock was added to timer_list - this meant
that an all-zeroes timer became illegal and init_timer() was required.

That spinlock isn't even there any more, although timer.base must now be
initialised.

I'll keep this debugging code in -mm.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30 17:37:18 -08:00
Oleg Nesterov
a8db2db1e6 [PATCH] introduce setup_timer() helper
Every user of init_timer() also needs to initialize ->function and ->data
fields.  This patch adds a simple setup_timer() helper for that.

The schedule_timeout() is patched as an example of usage.

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30 17:37:17 -08:00
Ingo Molnar
8d06afab73 [PATCH] timer initialization cleanup: DEFINE_TIMER
Clean up timer initialization by introducing DEFINE_TIMER a'la
DEFINE_SPINLOCK.  Build and boot-tested on x86.  A similar patch has been
been in the -RT tree for some time.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09 14:03:48 -07:00
Oleg Nesterov
fd450b7318 [PATCH] timers: introduce try_to_del_timer_sync()
This patch splits del_timer_sync() into 2 functions.  The new one,
try_to_del_timer_sync(), returns -1 when it hits executing timer.

It can be used in interrupt context, or when the caller hold locks which
can prevent completion of the timer's handler.

NOTE.  Currently it can't be used in interrupt context in UP case, because
->running_timer is used only with CONFIG_SMP.

Should the need arise, it is possible to kill #ifdef CONFIG_SMP in
set_running_timer(), it is cheap.

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 09:45:16 -07:00
Oleg Nesterov
55c888d6d0 [PATCH] timers fixes/improvements
This patch tries to solve following problems:

1. del_timer_sync() is racy. The timer can be fired again after
   del_timer_sync have checked all cpus and before it will recheck
   timer_pending().

2. It has scalability problems. All cpus are scanned to determine
   if the timer is running on that cpu.

   With this patch del_timer_sync is O(1) and no slower than plain
   del_timer(pending_timer), unless it has to actually wait for
   completion of the currently running timer.

   The only restriction is that the recurring timer should not use
   add_timer_on().

3. The timers are not serialized wrt to itself.

   If CPU_0 does mod_timer(jiffies+1) while the timer is currently
   running on CPU 1, it is quite possible that local interrupt on
   CPU_0 will start that timer before it finished on CPU_1.

4. The timers locking is suboptimal. __mod_timer() takes 3 locks
   at once and still requires wmb() in del_timer/run_timers.

   The new implementation takes 2 locks sequentially and does not
   need memory barriers.

Currently ->base != NULL means that the timer is pending. In that case
->base.lock is used to lock the timer. __mod_timer also takes timer->lock
because ->base can be == NULL.

This patch uses timer->entry.next != NULL as indication that the timer is
pending. So it does __list_del(), entry->next = NULL instead of list_del()
when the timer is deleted.

The ->base field is used for hashed locking only, it is initialized
in init_timer() which sets ->base = per_cpu(tvec_bases). When the
tvec_bases.lock is locked, it means that all timers which are tied
to this base via timer->base are locked, and the base itself is locked
too.

So __run_timers/migrate_timers can safely modify all timers which could
be found on ->tvX lists (pending timers).

When the timer's base is locked, and the timer removed from ->entry list
(which means that _run_timers/migrate_timers can't see this timer), it is
possible to set timer->base = NULL and drop the lock: the timer remains
locked.

This patch adds lock_timer_base() helper, which waits for ->base != NULL,
locks the ->base, and checks it is still the same.

__mod_timer() schedules the timer on the local CPU and changes it's base.
However, it does not lock both old and new bases at once. It locks the
timer via lock_timer_base(), deletes the timer, sets ->base = NULL, and
unlocks old base. Then __mod_timer() locks new_base, sets ->base = new_base,
and adds this timer. This simplifies the code, because AB-BA deadlock is not
possible. __mod_timer() also ensures that the timer's base is not changed
while the timer's handler is running on the old base.

__run_timers(), del_timer() do not change ->base anymore, they only clear
pending flag.

So del_timer_sync() can test timer->base->running_timer == timer to detect
whether it is running or not.

We don't need timer_list->lock anymore, this patch kills it.

We also don't need barriers. del_timer() and __run_timers() used smp_wmb()
before clearing timer's pending flag. It was needed because __mod_timer()
did not lock old_base if the timer is not pending, so __mod_timer()->list_add()
could race with del_timer()->list_del(). With this patch these functions are
serialized through base->lock.

One problem. TIMER_INITIALIZER can't use per_cpu(tvec_bases). So this patch
adds global

        struct timer_base_s {
                spinlock_t lock;
                struct timer_list *running_timer;
        } __init_timer_base;

which is used by TIMER_INITIALIZER. The corresponding fields in tvec_t_base_s
struct are replaced by struct timer_base_s t_base.

It is indeed ugly. But this can't have scalability problems. The global
__init_timer_base.lock is used only when __mod_timer() is called for the first
time AND the timer was compile time initialized. After that the timer migrates
to the local CPU.

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Renaud Lienhart <renaud.lienhart@free.fr>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 09:45:16 -07:00
Linus Torvalds
1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00