Commit Graph

10 Commits

Author SHA1 Message Date
Timur Tabi
e95c17e9ca drivers/video: fsl-diu-fb: add support for set_gamma ioctls
The MPC5121 BSP comes with a gamma_set utility that initializes the gamma
table via an ioctl.  Unfortunately, the ioctl number that utility uses
is defined improperly, but we can still support it.

Signed-off-by: Timur Tabi <timur@freescale.com>
2012-11-26 13:41:19 -06:00
Timur Tabi
c4e5a02327 drivers/video: fsl-diu-fb: only DIU modes 0 and 1 are supported
The Freescale DIU video controller supports five video "modes", but only
the first two are used by the driver.  The other three are special modes
that don't make sense for a framebuffer driver.  Therefore, there's no
point in keeping a global variable that indicates which mode we're
supposed to use.

Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2011-10-05 01:10:12 +00:00
Timur Tabi
b715f9f04c drivers/video: fsl-diu-fb: move some definitions out of the header file
Move several macros and structures from the Freescale DIU driver's header
file into the source file, because they're only used by that file.  Also
delete a few unused macros.

The diu and diu_ad structures cannot be moved because they're being used
by the MPC5121 platform file.  A future patch eliminate the need for
the platform file to access these structs, so they'll be moved also.

Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2011-10-05 01:10:12 +00:00
Timur Tabi
36b0b1d415 drivers/video: fsl-diu-fb: fix some ioctls
Use the _IOx macros to define the ioctl commands, instead of hard-coded
numbers.  Unfortunately, the original definitions of MFB_SET_PIXFMT and
MFB_GET_PIXFMT used the wrong value for the size, so these macros have
new values now.  To avoid breaking binary compatibility with older
applications, we retain support for the original values, but the driver
displays a warning message if they're used.

Also remove the FBIOGET_GWINFO and FBIOPUT_GWINFO ioctls.  FBIOPUT_GWINFO
was never implemented, and FBIOGET_GWINFO was never used by any
application.

Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2011-10-05 01:06:55 +00:00
Timur Tabi
2b7a905dd0 drivers/video: fsl-diu-fb: remove unusued MEM_ALLOC_THRESHOLD
If there was ever any code that used MEM_ALLOC_THRESHOLD, it was removed a
long time ago.

Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2011-09-18 20:08:58 +00:00
Timur Tabi
251b9b0d40 drivers/video: fsl-diu-fb: the video buffer is not I/O memory
The video buffer is not uncached memory-mapped I/O, so don't tag the virtual
address as __iomem.  It's also not a u8*.

Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2011-09-18 20:08:58 +00:00
Timur Tabi
4a64e49df2 drivers/video: fsl-diu-fb: remove unused ioctls
Remove some unused ioctl commands, and treat those commands as unsupported
instead of ignored.

Also remove struct mfb_alpha, which isn't used by any ioctl.  It may have
been once intended for MFB_SET_ALPHA, but that ioctl uses a different
data structure.

Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2011-09-18 20:08:56 +00:00
Timur Tabi
39785eb1d3 fsl-diu-fb: remove check for pixel clock ranges
The Freescale DIU framebuffer driver defines two constants, MIN_PIX_CLK and
MAX_PIX_CLK, that are supposed to represent the lower and upper limits of
the pixel clock.  These values, however, are true only for one platform
clock rate (533MHz) and only for the MPC8610.  So the actual range for
the pixel clock is chip-specific, which means the current values are almost
always wrong.  The chance of an out-of-range pixel clock being used are also
remote.

Rather than try to detect an out-of-range clock in the DIU driver, we depend
on the board-specific pixel clock function (e.g. p1022ds_set_pixel_clock)
to clamp the pixel clock to a supported value.

Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-06-24 17:08:49 +09:00
Mike Frysinger
dce1431cb3 fsl-diu-fb: drop dead ioctl define
The fsl-diu-fb driver no longer uses this define, and we have a common one
to cover this already (FBIO_WAITFORVSYNC).

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-15 13:49:51 +09:00
Anatolij Gustschin
0814a979a6 powerpc/5121: move fsl-diu-fb.h to include/linux
Some DIU structures will be used in platform code in
subsequent MPC5121 DIU patch, so we move this header
to be able to include it elsewhere.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Acked-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-08-01 17:06:44 -06:00