Commit Graph

67 Commits

Author SHA1 Message Date
Dave Chinner
f763fd440e xfs: disable noattr2/attr2 mount options for CRC enabled filesystems
attr2 format is always enabled for v5 superblock filesystems, so the
mount options to enable or disable it need to be cause mount errors.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>

(cherry picked from commit d3eaace84e)
2013-06-06 10:51:34 -05:00
Eric W. Biederman
7f78e03513 fs: Limit sys_mount to only request filesystem modules.
Modify the request_module to prefix the file system type with "fs-"
and add aliases to all of the filesystems that can be built as modules
to match.

A common practice is to build all of the kernel code and leave code
that is not commonly needed as modules, with the result that many
users are exposed to any bug anywhere in the kernel.

Looking for filesystems with a fs- prefix limits the pool of possible
modules that can be loaded by mount to just filesystems trivially
making things safer with no real cost.

Using aliases means user space can control the policy of which
filesystem modules are auto-loaded by editing /etc/modprobe.d/*.conf
with blacklist and alias directives.  Allowing simple, safe,
well understood work-arounds to known problematic software.

This also addresses a rare but unfortunate problem where the filesystem
name is not the same as it's module name and module auto-loading
would not work.  While writing this patch I saw a handful of such
cases.  The most significant being autofs that lives in the module
autofs4.

This is relevant to user namespaces because we can reach the request
module in get_fs_type() without having any special permissions, and
people get uncomfortable when a user specified string (in this case
the filesystem type) goes all of the way to request_module.

After having looked at this issue I don't think there is any
particular reason to perform any filtering or permission checks beyond
making it clear in the module request that we want a filesystem
module.  The common pattern in the kernel is to call request_module()
without regards to the users permissions.  In general all a filesystem
module does once loaded is call register_filesystem() and go to sleep.
Which means there is not much attack surface exposed by loading a
filesytem module unless the filesystem is mounted.  In a user
namespace filesystems are not mounted unless .fs_flags = FS_USERNS_MOUNT,
which most filesystems do not set today.

Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Acked-by: Kees Cook <keescook@chromium.org>
Reported-by: Kees Cook <keescook@google.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2013-03-03 19:36:31 -08:00
Abhijit Pawar
a17164e54b fs/xfs remove obsolete simple_strto<foo>
This patch replaces usages of obsolete simple_strtoul with kstrtoint in
xfs_args and suffix_strtoul.

Signed-off-by: Abhijit Pawar <abhi.c.pawar@gmail.com>
Reviewed-by: Jie Liu <jeff.liu@oracle.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
2013-01-13 14:42:07 -06:00
Brian Foster
579b62faa5 xfs: add background scanning to clear eofblocks inodes
Create a new mount workqueue and delayed_work to enable background
scanning and freeing of eofblocks inodes. The scanner kicks in once
speculative preallocation occurs and stops requeueing itself when
no eofblocks inodes exist.

The scan interval is based on the new
'speculative_prealloc_lifetime' tunable (default to 5m). The
background scanner performs unfiltered, best effort scans (which
skips inodes under lock contention or with a dirty cache mapping).

Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
2012-11-08 15:34:59 -06:00
Dave Chinner
6d8b79cfca xfs: rename xfs_sync.[ch] to xfs_icache.[ch]
xfs_sync.c now only contains inode reclaim functions and inode cache
iteration functions. It is not related to sync operations anymore.
Rename to xfs_icache.c to reflect it's contents and prepare for
consolidation with the other inode cache file that exists
(xfs_iget.c).

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
2012-10-17 13:40:09 -05:00
Dave Chinner
c75921a72a xfs: xfs_quiesce_attr() should quiesce the log like unmount
xfs_quiesce_attr() is supposed to leave the log empty with an
unmount record written. Right now it does not wait for the AIL to be
emptied before writing the unmount record, not does it wait for
metadata IO completion, either. Fix it to use the same method and
code as xfs_log_unmount().

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
2012-10-17 13:39:14 -05:00
Dave Chinner
c7eea6f7ad xfs: move xfs_quiesce_attr() into xfs_super.c
Both callers of xfs_quiesce_attr() are in xfs_super.c, and there's
nothing really sync-specific about this functionality so it doesn't
really matter where it lives. Move it to benext to it's callers, so
all the remount/sync_fs code is in the one place.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
2012-10-17 13:30:20 -05:00
Dave Chinner
34061f5c42 xfs: xfs_sync_fsdata is redundant
Why do we need to write the superblock to disk once we've written
all the data?  We don't actually - the reasons for doing this are
lost in the mists of time, and go back to the way Irix used to drive
VFS flushing.

On linux, this code is only called from two contexts: remount and
.sync_fs. In the remount case, the call is followed by a metadata
sync, which unpins and writes the superblock.  In the sync_fs case,
we only need to force the log to disk to ensure that the superblock
is correctly on disk, so we don't actually need to write it. Hence
the functionality is either redundant or superfluous and thus can be
removed.

Seeing as xfs_quiesce_data is essentially now just a log force,
remove it as well and fold the code back into the two callers.
Neither of them need the log covering check, either, as that is
redundant for the remount case, and unnecessary for the .sync_fs
case.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
2012-10-17 12:28:47 -05:00
Dave Chinner
5889608df3 xfs: syncd workqueue is no more
With the syncd functions moved to the log and/or removed, the syncd
workqueue is the only remaining bit left. It is used by the log
covering/ail pushing work, as well as by the inode reclaim work.

Given how cheap workqueues are these days, give the log and inode
reclaim work their own work queues and kill the syncd work queue.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ben Myers <bpm@sgi.com>
2012-10-17 12:19:27 -05:00
Dave Chinner
9aa05000f2 xfs: xfs_sync_data is redundant.
We don't do any data writeback from XFS any more - the VFS is
completely responsible for that, including for freeze. We can
replace the remaining caller with a VFS level function that
achieves the same thing, but without conflicting with current
writeback work.

This means we can remove the flush_work and xfs_flush_inodes() - the
VFS functionality completely replaces the internal flush queue for
doing this writeback work in a separate context to avoid stack
overruns.

This does have one complication - it cannot be called with page
locks held.  Hence move the flushing of delalloc space when ENOSPC
occurs back up into xfs_file_aio_buffered_write when we don't hold
any locks that will stall writeback.

Unfortunately, writeback_inodes_sb_if_idle() is not sufficient to
trigger delalloc conversion fast enough to prevent spurious ENOSPC
whent here are hundreds of writers, thousands of small files and GBs
of free RAM.  Hence we need to use sync_sb_inodes() to block callers
while we wait for writeback like the previous xfs_flush_inodes
implementation did.

That means we have to hold the s_umount lock here, but because this
call can nest inside i_mutex (the parent directory in the create
case, held by the VFS), we have to use down_read_trylock() to avoid
potential deadlocks. In practice, this trylock will succeed on
almost every attempt as unmount/remount type operations are
exceedingly rare.

Note: we always need to pass a count of zero to
generic_file_buffered_write() as the previously written byte count.
We only do this by accident before this patch by the virtue of ret
always being zero when there are no errors. Make this explicit
rather than needing to specifically zero ret in the ENOSPC retry
case.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Tested-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ben Myers <bpm@sgi.com>
2012-10-17 12:01:25 -05:00
Dave Chinner
f661f1e0bf xfs: sync work is now only periodic log work
The only thing the periodic sync work does now is flush the AIL and
idle the log. These are really functions of the log code, so move
the work to xfs_log.c and rename it appropriately.

The only wart that this leaves behind is the xfssyncd_centisecs
sysctl, otherwise the xfssyncd is dead. Clean up any comments that
related to xfssyncd to reflect it's passing.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ben Myers <bpm@sgi.com>
2012-10-17 11:53:29 -05:00
Dave Chinner
7f7bebefba xfs: don't run the sync work if the filesystem is read-only
If the filesystem is mounted or remounted read-only, stop the sync
worker that tries to flush or cover the log if the filesystem is
dirty. It's read-only, so it isn't dirty. Restart it on a remount,rw
as necessary. This avoids the need for RO checks in the work.

Similarly, stop the sync work when the filesystem is frozen, and
start it again when the filesysetm is thawed. This avoids the need
for special freeze checks in the work.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ben Myers <bpm@sgi.com>
2012-10-17 11:48:29 -05:00
Dave Chinner
7e18530bef xfs: rationalise xfs_mount_wq users
Instead of starting and stopping background work on the xfs_mount_wq
all at the same time, separate them to where they really are needed
to start and stop.

The xfs_sync_worker, only needs to be started after all the mount
processing has completed successfully, while it needs to be stopped
before the log is unmounted.

The xfs_reclaim_worker is started on demand, and can be
stopped before the unmount process does it's own inode reclaim pass.

The xfs_flush_inodes work is run on demand, and so we really only
need to ensure that it has stopped running before we start
processing an unmount, freeze or remount,ro.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ben Myers <bpm@sgi.com>
2012-10-17 11:25:06 -05:00
Dave Chinner
33c7a2bc48 xfs: xfs_syncd_stop must die
xfs_syncd_start and xfs_syncd_stop tie a bunch of unrelated
functionailty together that actually have different start and stop
requirements. Kill these functions and open code the start/stop
methods for each of the background functions.

Subsequent patches will move the start/stop functions around to the
correct places to avoid races and shutdown issues.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
2012-10-17 11:14:19 -05:00
Linus Torvalds
60c7b4df82 xfs: update for 3.7-rc1
Several enhancements and cleanups:
 
 - make inode32 and inode64 remountable options
 - SEEK_HOLE/SEEK_DATA enhancements
 - cleanup struct declarations in xfs_mount.h
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.10 (GNU/Linux)
 
 iQIcBAABAgAGBQJQayQwAAoJENaLyazVq6ZO2H0P/RiWpYlVLP0ZNbxUOvL33WFy
 xOHwNkhRG23Z0sgDfrUJjDibzOuSmf/XothsChGPE4Mm8JLCjZKzxR77ySP+pbC5
 sylrciXl5E2tY3wtW8oh2kQORLRneqA6qXNCrOtYklqwSmB0qx7bf9OdjL/ALiuC
 SvTAn/PhyVZqGJgVZyEAc63CsbSzK2XmLgyfeQeA7JbSptbg5fDkFYrbNE+zr+yW
 S1umMsuZW+zwDjzRq0lGkLcYOH3fD0JpMrfqvtQsk3+SIDlq1HSaObD63dhOJVUV
 LUpOqgXCPEC3nOL3Dh+i8gv5OTRLJW0P2zYuAY++kqYnuRsYU18tcfdd0loTGeHV
 LulurSIMBJV19Qx1K3C3E8KPwbwNwNlvmpEbgXy00Qet7LTPbofcUXDi3mcV6ozQ
 SMGQh42VGV4S8wEjAp93wLva7xLf6enV/X6Stuzy/ec8HN8K2tYMyYyGvSxZbjmq
 9JTxCulDvbr7EnSDqCkH1inlQ4cXvBSzOi2trDpQbKq0cuYbqlzgL2sloBv+y+CB
 4fTWEeeisQ05VhHU8Yp3bsVtiyUjGGcbOgvqM+NHmmh1HuHUmiBnXh7k3RfaLfBi
 E4RprFT0Yrpo16mt3Fn0GjkhY87DYHBGIehFOlu13zKPc5q+IBTwIjSugxoa23EL
 uXTtFFHMxR4pUV/An5Wf
 =G6gd
 -----END PGP SIGNATURE-----

Merge tag 'for-linus-v3.7-rc1' of git://oss.sgi.com/xfs/xfs

Pull xfs update from Ben Myers:
 "Several enhancements and cleanups:

   - make inode32 and inode64 remountable options
   - SEEK_HOLE/SEEK_DATA enhancements
   - cleanup struct declarations in xfs_mount.h"

* tag 'for-linus-v3.7-rc1' of git://oss.sgi.com/xfs/xfs:
  xfs: Make inode32 a remountable option
  xfs: add inode64->inode32 transition into xfs_set_inode32()
  xfs: Fix mp->m_maxagi update during inode64 remount
  xfs: reduce code duplication handling inode32/64 options
  xfs: make inode64 as the default allocation mode
  xfs: Fix m_agirotor reset during AG selection
  Make inode64 a remountable option
  xfs: stop the sync worker before xfs_unmountfs
  xfs: xfs_seek_hole() refinement with hole searching from page cache for unwritten extents
  xfs: xfs_seek_data() refinement with unwritten extents check up from page cache
  xfs: Introduce a helper routine to probe data or hole offset from page cache
  xfs: Remove type argument from xfs_seek_data()/xfs_seek_hole()
  xfs: fix race while discarding buffers [V4]
  xfs: check for possible overflow in xfs_ioc_trim
  xfs: unlock the AGI buffer when looping in xfs_dialloc
  xfs: kill struct declarations in xfs_mount.h
  xfs: fix uninitialised variable in xfs_rtbuf_get()
2012-10-02 20:42:58 -07:00
Linus Torvalds
aab174f0df Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs update from Al Viro:

 - big one - consolidation of descriptor-related logics; almost all of
   that is moved to fs/file.c

   (BTW, I'm seriously tempted to rename the result to fd.c.  As it is,
   we have a situation when file_table.c is about handling of struct
   file and file.c is about handling of descriptor tables; the reasons
   are historical - file_table.c used to be about a static array of
   struct file we used to have way back).

   A lot of stray ends got cleaned up and converted to saner primitives,
   disgusting mess in android/binder.c is still disgusting, but at least
   doesn't poke so much in descriptor table guts anymore.  A bunch of
   relatively minor races got fixed in process, plus an ext4 struct file
   leak.

 - related thing - fget_light() partially unuglified; see fdget() in
   there (and yes, it generates the code as good as we used to have).

 - also related - bits of Cyrill's procfs stuff that got entangled into
   that work; _not_ all of it, just the initial move to fs/proc/fd.c and
   switch of fdinfo to seq_file.

 - Alex's fs/coredump.c spiltoff - the same story, had been easier to
   take that commit than mess with conflicts.  The rest is a separate
   pile, this was just a mechanical code movement.

 - a few misc patches all over the place.  Not all for this cycle,
   there'll be more (and quite a few currently sit in akpm's tree)."

Fix up trivial conflicts in the android binder driver, and some fairly
simple conflicts due to two different changes to the sock_alloc_file()
interface ("take descriptor handling from sock_alloc_file() to callers"
vs "net: Providing protocol type via system.sockprotoname xattr of
/proc/PID/fd entries" adding a dentry name to the socket)

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (72 commits)
  MAX_LFS_FILESIZE should be a loff_t
  compat: fs: Generic compat_sys_sendfile implementation
  fs: push rcu_barrier() from deactivate_locked_super() to filesystems
  btrfs: reada_extent doesn't need kref for refcount
  coredump: move core dump functionality into its own file
  coredump: prevent double-free on an error path in core dumper
  usb/gadget: fix misannotations
  fcntl: fix misannotations
  ceph: don't abuse d_delete() on failure exits
  hypfs: ->d_parent is never NULL or negative
  vfs: delete surplus inode NULL check
  switch simple cases of fget_light to fdget
  new helpers: fdget()/fdput()
  switch o2hb_region_dev_write() to fget_light()
  proc_map_files_readdir(): don't bother with grabbing files
  make get_file() return its argument
  vhost_set_vring(): turn pollstart/pollstop into bool
  switch prctl_set_mm_exe_file() to fget_light()
  switch xfs_find_handle() to fget_light()
  switch xfs_swapext() to fget_light()
  ...
2012-10-02 20:25:04 -07:00
Kirill A. Shutemov
8c0a853770 fs: push rcu_barrier() from deactivate_locked_super() to filesystems
There's no reason to call rcu_barrier() on every
deactivate_locked_super().  We only need to make sure that all delayed rcu
free inodes are flushed before we destroy related cache.

Removing rcu_barrier() from deactivate_locked_super() affects some fast
paths.  E.g.  on my machine exit_group() of a last process in IPC
namespace takes 0.07538s.  rcu_barrier() takes 0.05188s of that time.

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-10-02 21:35:55 -04:00
Linus Torvalds
033d9959ed Merge branch 'for-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq
Pull workqueue changes from Tejun Heo:
 "This is workqueue updates for v3.7-rc1.  A lot of activities this
  round including considerable API and behavior cleanups.

   * delayed_work combines a timer and a work item.  The handling of the
     timer part has always been a bit clunky leading to confusing
     cancelation API with weird corner-case behaviors.  delayed_work is
     updated to use new IRQ safe timer and cancelation now works as
     expected.

   * Another deficiency of delayed_work was lack of the counterpart of
     mod_timer() which led to cancel+queue combinations or open-coded
     timer+work usages.  mod_delayed_work[_on]() are added.

     These two delayed_work changes make delayed_work provide interface
     and behave like timer which is executed with process context.

   * A work item could be executed concurrently on multiple CPUs, which
     is rather unintuitive and made flush_work() behavior confusing and
     half-broken under certain circumstances.  This problem doesn't
     exist for non-reentrant workqueues.  While non-reentrancy check
     isn't free, the overhead is incurred only when a work item bounces
     across different CPUs and even in simulated pathological scenario
     the overhead isn't too high.

     All workqueues are made non-reentrant.  This removes the
     distinction between flush_[delayed_]work() and
     flush_[delayed_]_work_sync().  The former is now as strong as the
     latter and the specified work item is guaranteed to have finished
     execution of any previous queueing on return.

   * In addition to the various bug fixes, Lai redid and simplified CPU
     hotplug handling significantly.

   * Joonsoo introduced system_highpri_wq and used it during CPU
     hotplug.

  There are two merge commits - one to pull in IRQ safe timer from
  tip/timers/core and the other to pull in CPU hotplug fixes from
  wq/for-3.6-fixes as Lai's hotplug restructuring depended on them."

Fixed a number of trivial conflicts, but the more interesting conflicts
were silent ones where the deprecated interfaces had been used by new
code in the merge window, and thus didn't cause any real data conflicts.

Tejun pointed out a few of them, I fixed a couple more.

* 'for-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: (46 commits)
  workqueue: remove spurious WARN_ON_ONCE(in_irq()) from try_to_grab_pending()
  workqueue: use cwq_set_max_active() helper for workqueue_set_max_active()
  workqueue: introduce cwq_set_max_active() helper for thaw_workqueues()
  workqueue: remove @delayed from cwq_dec_nr_in_flight()
  workqueue: fix possible stall on try_to_grab_pending() of a delayed work item
  workqueue: use hotcpu_notifier() for workqueue_cpu_down_callback()
  workqueue: use __cpuinit instead of __devinit for cpu callbacks
  workqueue: rename manager_mutex to assoc_mutex
  workqueue: WORKER_REBIND is no longer necessary for idle rebinding
  workqueue: WORKER_REBIND is no longer necessary for busy rebinding
  workqueue: reimplement idle worker rebinding
  workqueue: deprecate __cancel_delayed_work()
  workqueue: reimplement cancel_delayed_work() using try_to_grab_pending()
  workqueue: use mod_delayed_work() instead of __cancel + queue
  workqueue: use irqsafe timer for delayed_work
  workqueue: clean up delayed_work initializers and add missing one
  workqueue: make deferrable delayed_work initializer names consistent
  workqueue: cosmetic whitespace updates for macro definitions
  workqueue: deprecate system_nrt[_freezable]_wq
  workqueue: deprecate flush[_delayed]_work_sync()
  ...
2012-10-02 09:54:49 -07:00
Carlos Maiolino
2ea0392983 xfs: Make inode32 a remountable option
As inode64 is the default option now, and was also made remountable
previously, inode32 can also be remounted on-the-fly when it is needed.

Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
2012-09-26 16:01:28 -05:00
Carlos Maiolino
4056c1d08d xfs: add inode64->inode32 transition into xfs_set_inode32()
To make inode32 a remountable option, xfs_set_inode32() should be able
to make a transition from inode64 option, disabling inode allocation on
higher AGs.

Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
2012-09-26 15:59:50 -05:00
Carlos Maiolino
4c0837224c xfs: Fix mp->m_maxagi update during inode64 remount
With the changes made on xfs_set_inode64(), to make it behave as
xfs_set_inode32() (now leaving to the caller the responsibility to update
mp->m_maxagi), we use the return value of xfs_set_inode64() to update
mp->m_maxagi during remount.

Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
2012-09-26 15:58:21 -05:00
Carlos Maiolino
2d2194f61f xfs: reduce code duplication handling inode32/64 options
Add xfs_set_inode32() to be used to enable inode32 allocation mode. this
will reduce the amount of duplicated code needed to mount/remount a
filesystem with inode32 option.  This patch also changes
xfs_set_inode64() to return the maximum AG number that inodes can be
allocated instead of set mp->m_maxagi by itself, so that the behaviour
is the same as xfs_set_inode32().  This simplifies code that calls these
functions and needs to know the maximum AG that inodes can be allocated
in.

Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
2012-09-26 15:56:33 -05:00
Carlos Maiolino
08bf540412 xfs: make inode64 as the default allocation mode
since 64-bit inodes can be accessed while using inode32, and these can
also be used on 32-bit kernels, there is no reason to still keep inode32
as the default mount option.  If the filesystem cannot handle 64bit
inode numbers (i.e CONFIG_LBDAF is not enabled and BITS_PER_LONG == 32),
XFS_MOUNT_SMALL_INUMS will still be set by default, so inode64 is not an
unconditional default value.

Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
2012-09-26 15:54:19 -05:00
Carlos Maiolino
c3a58fecdd Make inode64 a remountable option
Actually, there is no reason about why a user must umount and mount a
XFS filesystem to enable 'inode64' option. So, this patch makes this a
remountable option.

Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
2012-09-26 15:41:39 -05:00
Ben Myers
0ba6e5368c xfs: stop the sync worker before xfs_unmountfs
Cancel work of the xfs_sync_worker before teardown of the log in
xfs_unmountfs.  This prevents occasional crashes on unmount like so:

PID: 21602  TASK: ee9df060  CPU: 0   COMMAND: "kworker/0:3"
 #0 [c5377d28] crash_kexec at c0292c94
 #1 [c5377d80] oops_end at c07090c2
 #2 [c5377d98] no_context at c06f614e
 #3 [c5377dbc] __bad_area_nosemaphore at c06f6281
 #4 [c5377df4] bad_area_nosemaphore at c06f629b
 #5 [c5377e00] do_page_fault at c070b0cb
 #6 [c5377e7c] error_code (via page_fault) at c070892c
    EAX: f300c6a8  EBX: f300c6a8  ECX: 000000c0  EDX: 000000c0  EBP: c5377ed0
    DS:  007b      ESI: 00000000  ES:  007b      EDI: 00000001  GS:  ffffad20
    CS:  0060      EIP: c0481ad0  ERR: ffffffff  EFLAGS: 00010246
 #7 [c5377eb0] atomic64_read_cx8 at c0481ad0
 #8 [c5377ebc] xlog_assign_tail_lsn_locked at f7cc7c6e [xfs]
 #9 [c5377ed4] xfs_trans_ail_delete_bulk at f7ccd520 [xfs]
#10 [c5377f0c] xfs_buf_iodone at f7ccb602 [xfs]
#11 [c5377f24] xfs_buf_do_callbacks at f7cca524 [xfs]
#12 [c5377f30] xfs_buf_iodone_callbacks at f7cca5da [xfs]
#13 [c5377f4c] xfs_buf_iodone_work at f7c718d0 [xfs]
#14 [c5377f58] process_one_work at c024ee4c
#15 [c5377f98] worker_thread at c024f43d
#16 [c5377fbc] kthread at c025326b
#17 [c5377fe8] kernel_thread_helper at c070e834

PID: 26653  TASK: e79143b0  CPU: 3   COMMAND: "umount"
 #0 [cde0fda0] __schedule at c0706595
 #1 [cde0fe28] schedule at c0706b89
 #2 [cde0fe30] schedule_timeout at c0705600
 #3 [cde0fe94] __down_common at c0706098
 #4 [cde0fec8] __down at c0706122
 #5 [cde0fed0] down at c025936f
 #6 [cde0fee0] xfs_buf_lock at f7c7131d [xfs]
 #7 [cde0ff00] xfs_freesb at f7cc2236 [xfs]
 #8 [cde0ff10] xfs_fs_put_super at f7c80f21 [xfs]
 #9 [cde0ff1c] generic_shutdown_super at c0333d7a
#10 [cde0ff38] kill_block_super at c0333e0f
#11 [cde0ff48] deactivate_locked_super at c0334218
#12 [cde0ff58] deactivate_super at c033495d
#13 [cde0ff68] mntput_no_expire at c034bc13
#14 [cde0ff7c] sys_umount at c034cc69
#15 [cde0ffa0] sys_oldumount at c034ccd4
#16 [cde0ffb0] system_call at c0707e66

commit 11159a05 added this to xfs_log_unmount and needs to be cleaned up
at a later date.

Signed-off-by: Ben Myers <bpm@sgi.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
2012-09-18 16:51:26 -05:00
Ben Myers
4026c9fde9 xfs: stop the sync worker before xfs_unmountfs
Cancel work of the xfs_sync_worker before teardown of the log in
xfs_unmountfs.  This prevents occasional crashes on unmount like so:

PID: 21602  TASK: ee9df060  CPU: 0   COMMAND: "kworker/0:3"
 #0 [c5377d28] crash_kexec at c0292c94
 #1 [c5377d80] oops_end at c07090c2
 #2 [c5377d98] no_context at c06f614e
 #3 [c5377dbc] __bad_area_nosemaphore at c06f6281
 #4 [c5377df4] bad_area_nosemaphore at c06f629b
 #5 [c5377e00] do_page_fault at c070b0cb
 #6 [c5377e7c] error_code (via page_fault) at c070892c
    EAX: f300c6a8  EBX: f300c6a8  ECX: 000000c0  EDX: 000000c0  EBP: c5377ed0
    DS:  007b      ESI: 00000000  ES:  007b      EDI: 00000001  GS:  ffffad20
    CS:  0060      EIP: c0481ad0  ERR: ffffffff  EFLAGS: 00010246
 #7 [c5377eb0] atomic64_read_cx8 at c0481ad0
 #8 [c5377ebc] xlog_assign_tail_lsn_locked at f7cc7c6e [xfs]
 #9 [c5377ed4] xfs_trans_ail_delete_bulk at f7ccd520 [xfs]
#10 [c5377f0c] xfs_buf_iodone at f7ccb602 [xfs]
#11 [c5377f24] xfs_buf_do_callbacks at f7cca524 [xfs]
#12 [c5377f30] xfs_buf_iodone_callbacks at f7cca5da [xfs]
#13 [c5377f4c] xfs_buf_iodone_work at f7c718d0 [xfs]
#14 [c5377f58] process_one_work at c024ee4c
#15 [c5377f98] worker_thread at c024f43d
#16 [c5377fbc] kthread at c025326b
#17 [c5377fe8] kernel_thread_helper at c070e834

PID: 26653  TASK: e79143b0  CPU: 3   COMMAND: "umount"
 #0 [cde0fda0] __schedule at c0706595
 #1 [cde0fe28] schedule at c0706b89
 #2 [cde0fe30] schedule_timeout at c0705600
 #3 [cde0fe94] __down_common at c0706098
 #4 [cde0fec8] __down at c0706122
 #5 [cde0fed0] down at c025936f
 #6 [cde0fee0] xfs_buf_lock at f7c7131d [xfs]
 #7 [cde0ff00] xfs_freesb at f7cc2236 [xfs]
 #8 [cde0ff10] xfs_fs_put_super at f7c80f21 [xfs]
 #9 [cde0ff1c] generic_shutdown_super at c0333d7a
#10 [cde0ff38] kill_block_super at c0333e0f
#11 [cde0ff48] deactivate_locked_super at c0334218
#12 [cde0ff58] deactivate_super at c033495d
#13 [cde0ff68] mntput_no_expire at c034bc13
#14 [cde0ff7c] sys_umount at c034cc69
#15 [cde0ffa0] sys_oldumount at c034ccd4
#16 [cde0ffb0] system_call at c0707e66

commit 11159a05 added this to xfs_log_unmount and needs to be cleaned up
at a later date.

Signed-off-by: Ben Myers <bpm@sgi.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
2012-09-17 12:05:22 -05:00
Tejun Heo
43829731dd workqueue: deprecate flush[_delayed]_work_sync()
flush[_delayed]_work_sync() are now spurious.  Mark them deprecated
and convert all users to flush[_delayed]_work().

If you're cc'd and wondering what's going on: Now all workqueues are
non-reentrant and the regular flushes guarantee that the work item is
not pending or running on any CPU on return, so there's no reason to
use the sync flushes at all and they're going away.

This patch doesn't make any functional difference.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Mattia Dongili <malattia@linux.it>
Cc: Kent Yoder <key@linux.vnet.ibm.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Karsten Keil <isdn@linux-pingi.de>
Cc: Bryan Wu <bryan.wu@canonical.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Mauro Carvalho Chehab <mchehab@infradead.org>
Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: linux-wireless@vger.kernel.org
Cc: Anton Vorontsov <cbou@mail.ru>
Cc: Sangbeom Kim <sbkim73@samsung.com>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Eric Van Hensbergen <ericvh@gmail.com>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Petr Vandrovec <petr@vandrovec.name>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Avi Kivity <avi@redhat.com>
2012-08-20 14:51:24 -07:00
Christoph Hellwig
4f59af758f xfs: remove iolock lock classes
Content-Disposition: inline; filename=xfs-remove-iolock-classes

Now that we never take the iolock during inode reclaim we don't need
to play games with lock classes.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Rich Johnston <rjohnston@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
2012-07-29 16:23:51 -05:00
Christoph Hellwig
69ff282611 xfs: implement ->update_time
Use this new method to replace our hacky use of ->dirty_inode.  An additional
benefit is that we can now propagate errors up the stack.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
2012-07-22 10:38:32 -05:00
Dave Chinner
1d9025e561 xfs: remove struct xfs_dabuf and infrastructure
The struct xfs_dabuf now only tracks a single xfs_buf and all the
information it holds can be gained directly from the xfs_buf. Hence
we can remove the struct dabuf and pass the xfs_buf around
everywhere.

Kill the struct dabuf and the associated infrastructure.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ben Myers <bpm@sgi.com>
2012-07-01 14:50:07 -05:00
Dave Chinner
77c1a08fc9 xfs: struct xfs_buf_log_format isn't variable sized.
The struct xfs_buf_log_format wants to think the dirty bitmap is
variable sized.  In fact, it is variable size on disk simply due to
the way we map it from the in-memory structure, but we still just
use a fixed size memory allocation for the in-memory structure.

Hence it makes no sense to set the function up as a variable sized
structure when we already know it's maximum size, and we always
allocate it as such. Simplify the structure by making the dirty
bitmap a fixed sized array and just using the size of the structure
for the allocation size.

This will make it much simpler to allocate and manipulate an array
of format structures for discontiguous buffer support.

The previous struct xfs_buf_log_item size according to
/proc/slabinfo was 224 bytes. pahole doesn't give the same size
because of the variable size definition. With this modification,
pahole reports the same as /proc/slabinfo:

	/* size: 224, cachelines: 4, members: 6 */

Because the xfs_buf_log_item size is now determined by the maximum
supported block size we introduce a dependency on xfs_alloc_btree.h.
Avoid this dependency by moving the idefines for the maximum block
sizes supported to xfs_types.h with all the other max/min type
defines to avoid any new dependencies.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ben Myers <bpm@sgi.com>
2012-07-01 14:50:04 -05:00
Linus Torvalds
90324cc1b1 avoid iput() from flusher thread
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJPw2J/AAoJECvKgwp+S8Ja5jkP/3uMxkhf8XQpXCI3O1QVfaQr
 uZFfM8sINqIPDVm1dtFjFj7f8Bw9mhE2KAnnJ1rKT8tQwqq9yAse1QPlhCG1ZqoP
 +AnMDDXHtx7WmQZXhBvS9b+unpZ7Jr6r6pO5XrmTL2kRL3YJPUhZ2+xbTT5belTB
 KoAu4WqORZRxfXoC76S7U8K+D4NcAGhAOxCClsIjmY+oocCiCag4FZOyzYIFViqc
 ghUN/+rLQ3fqGGv2yO7Ylx1gUM7sxIwkZQ/h962jFAtxz9czImr2NmRoMliOaOkS
 tvcnIf+E3u0n/zIjzFvzhxKgHJPP8PkcPMk60d3jKmFngBkqFTzNUeVTP8md7HrV
 4DlXisWr+z7YVyWUCFaNcJLmjiWSwQ8DV/clRLobeBf9EJKan5F1PjFgl6PLJM5F
 Qr1+LHMNaetdulBwMRTyveZTzYqw9RmDnD9dWMo4mX/kTpvtC4jTPVV7hkRD+Qlv
 5vTRR+VXL3Q50yClLf0AQMSKTnH2gBuepM/b+7cShLGfsMln8DtUjmbigv+niL63
 BibcCIbIlP2uWGnl37VhsC34AT+RKt3lggrBOpn/7XJMq/wKR7IRP/7V9TfYgaUN
 NBa+wtnLDa1pZEn/X7izdcQP62PzDtmB+ObvYT0Yb40A4+2ud3qF/lB53c1A1ewF
 /9c4zxxekjHZnn2oooEa
 =oLXf
 -----END PGP SIGNATURE-----

Merge tag 'writeback' of git://git.kernel.org/pub/scm/linux/kernel/git/wfg/linux

Pull writeback tree from Wu Fengguang:
 "Mainly from Jan Kara to avoid iput() in the flusher threads."

* tag 'writeback' of git://git.kernel.org/pub/scm/linux/kernel/git/wfg/linux:
  writeback: Avoid iput() from flusher thread
  vfs: Rename end_writeback() to clear_inode()
  vfs: Move waiting for inode writeback from end_writeback() to evict_inode()
  writeback: Refactor writeback_single_inode()
  writeback: Remove wb->list_lock from writeback_single_inode()
  writeback: Separate inode requeueing after writeback
  writeback: Move I_DIRTY_PAGES handling
  writeback: Move requeueing when I_SYNC set to writeback_sb_inodes()
  writeback: Move clearing of I_SYNC into inode_sync_complete()
  writeback: initialize global_dirty_limit
  fs: remove 8 bytes of padding from struct writeback_control on 64 bit builds
  mm: page-writeback.c: local functions should not be exposed globally
2012-05-28 09:54:45 -07:00
Dave Chinner
ad1e95c54e xfs: clean up xfs_bit.h includes
With the removal of xfs_rw.h and other changes over time, xfs_bit.h
is being included in many files that don't actually need it. Clean
up the includes as necessary.

Also move the only-used-once xfs_ialloc_find_free() static inline
function out of a header file that is widely included to reduce
the number of needless dependencies on xfs_bit.h.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
2012-05-14 16:21:00 -05:00
Dave Chinner
4c2d542f2e xfs: Do background CIL flushes via a workqueue
Doing background CIL flushes adds significant latency to whatever
async transaction that triggers it. To avoid blocking async
transactions on things like waiting for log buffer IO to complete,
move the CIL push off into a workqueue.  By moving the push work
into a workqueue, we remove all the latency that the commit adds
from the foreground transaction commit path. This also means that
single threaded workloads won't do the CIL push procssing, leaving
them more CPU to do more async transactions.

To do this, we need to keep track of the sequence number we have
pushed work for. This avoids having many transaction commits
attempting to schedule work for the same sequence, and ensures that
we only ever have one push (background or forced) in progress at a
time. It also means that we don't need to take the CIL lock in write
mode to check for potential background push races, which reduces
lock contention.

To avoid potential issues with "smart" IO schedulers, don't use the
workqueue for log force triggered flushes. Instead, do them directly
so that the log IO is done directly by the process issuing the log
force and so doesn't get stuck on IO elevator queue idling
incorrectly delaying the log IO from the workqueue.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
2012-05-14 16:20:34 -05:00
Christoph Hellwig
43ff2122e6 xfs: on-stack delayed write buffer lists
Queue delwri buffers on a local on-stack list instead of a per-buftarg one,
and write back the buffers per-process instead of by waking up xfsbufd.

This is now easily doable given that we have very few places left that write
delwri buffers:

 - log recovery:
	Only done at mount time, and already forcing out the buffers
	synchronously using xfs_flush_buftarg

 - quotacheck:
	Same story.

 - dquot reclaim:
	Writes out dirty dquots on the LRU under memory pressure.  We might
	want to look into doing more of this via xfsaild, but it's already
	more optimal than the synchronous inode reclaim that writes each
	buffer synchronously.

 - xfsaild:
	This is the main beneficiary of the change.  By keeping a local list
	of buffers to write we reduce latency of writing out buffers, and
	more importably we can remove all the delwri list promotions which
	were hitting the buffer cache hard under sustained metadata loads.

The implementation is very straight forward - xfs_buf_delwri_queue now gets
a new list_head pointer that it adds the delwri buffers to, and all callers
need to eventually submit the list using xfs_buf_delwi_submit or
xfs_buf_delwi_submit_nowait.  Buffers that already are on a delwri list are
skipped in xfs_buf_delwri_queue, assuming they already are on another delwri
list.  The biggest change to pass down the buffer list was done to the AIL
pushing. Now that we operate on buffers the trylock, push and pushbuf log
item methods are merged into a single push routine, which tries to lock the
item, and if possible add the buffer that needs writeback to the buffer list.
This leads to much simpler code than the previous split but requires the
individual IOP_PUSH instances to unlock and reacquire the AIL around calls
to blocking routines.

Given that xfsailds now also handle writing out buffers, the conditions for
log forcing and the sleep times needed some small changes.  The most
important one is that we consider an AIL busy as long we still have buffers
to push, and the other one is that we do increment the pushed LSN for
buffers that are under flushing at this moment, but still count them towards
the stuck items for restart purposes.  Without this we could hammer on stuck
items without ever forcing the log and not make progress under heavy random
delete workloads on fast flash storage devices.

[ Dave Chinner:
	- rebase on previous patches.
	- improved comments for XBF_DELWRI_Q handling
	- fix XBF_ASYNC handling in queue submission (test 106 failure)
	- rename delwri submit function buffer list parameters for clarity
	- xfs_efd_item_push() should return XFS_ITEM_PINNED ]

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
2012-05-14 16:20:31 -05:00
Shaohua Li
7582df516c xfs: using GFP_NOFS for blkdev_issue_flush
Issuing a block device flush request in transaction context using GFP_KERNEL
directly can cause deadlocks due to memory reclaim recursion. Use GFP_NOFS to
avoid recursion from reclaim context.

Signed-off-by: Shaohua Li <shli@fusionio.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
2012-05-14 16:20:23 -05:00
Jan Kara
dbd5768f87 vfs: Rename end_writeback() to clear_inode()
After we moved inode_sync_wait() from end_writeback() it doesn't make sense
to call the function end_writeback() anymore. Rename it to clear_inode()
which well says what the function really does - set I_CLEAR flag.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
2012-05-06 13:43:41 +08:00
Dave Chinner
8a00ebe4cf xfs: Ensure inode reclaim can run during quotacheck
Because the mount process can run a quotacheck and consume lots of
inodes, we need to be able to run periodic inode reclaim during the
mount process. This will prevent running the system out of memory
during quota checks.

This essentially reverts 2bcf6e97, but that is safe to do now that
the quota sync code that was causing problems during long quotacheck
executions is now gone.

The reclaim work is currently protected from running during the
unmount process by a check against MS_ACTIVE. Unfortunately, this
also means that the reclaim work cannot run during mount.  The
unmount process should stop the reclaim cleanly before freeing
anything that the reclaim work depends on, so there is no need to
have this guard in place.

Also, the inode reclaim work is demand driven, so there is no need
to start it immediately during mount. It will be started the moment
an inode is queued for reclaim, so qutoacheck will trigger it just
fine.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
2012-04-17 11:19:47 -05:00
Jie Liu
da5bf95e3c xfs: don't fill statvfs with project quota for a directory if it was not enabled.
Check if the project quota is running or not before performing
xfs_qm_statvfs(), just return if not.  Otherwise the ASSERT
XFS_IS_QUOTA_RUNNING in xfs_qm_dqget will be popped.

Signed-off-by: Jie Liu <jeff.liu@oracle.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
2012-04-16 16:32:20 -05:00
Linus Torvalds
f21ce8f844 Merge branch 'for-linus' of git://oss.sgi.com/xfs/xfs
Pull XFS update (part 2) from Ben Myers:
 "Fixes for tracing of xfs_name strings, flag handling in
  open_by_handle, a log space hang with freeze/unfreeze, fstrim offset
  calculations, a section mismatch with xfs_qm_exit, an oops in
  xlog_recover_process_iunlinks, and a deadlock in xfs_rtfree_extent.

  There are also additional trace points for attributes, and the
  addition of a workqueue for allocation to work around kernel stack
  size limitations."

* 'for-linus' of git://oss.sgi.com/xfs/xfs:
  xfs: add lots of attribute trace points
  xfs: Fix oops on IO error during xlog_recover_process_iunlinks()
  xfs: fix fstrim offset calculations
  xfs: Account log unmount transaction correctly
  xfs: don't cache inodes read through bulkstat
  xfs: trace xfs_name strings correctly
  xfs: introduce an allocation workqueue
  xfs: Fix open flag handling in open_by_handle code
  xfs: fix deadlock in xfs_rtfree_extent
  fs: xfs: fix section mismatch in linux-next
2012-03-28 15:23:52 -07:00
Dave Chinner
5132ba8f2b xfs: don't cache inodes read through bulkstat
When we read inodes via bulkstat, we generally only read them once
and then throw them away - they never get used again. If we retain
them in cache, then it simply causes the working set of inodes and
other cached items to be reclaimed just so the inode cache can grow.

Avoid this problem by marking inodes read by bulkstat not to be
cached and check this flag in .drop_inode to determine whether the
inode should be added to the VFS LRU or not. If the inode lookup
hits an already cached inode, then don't set the flag. If the inode
lookup hits an inode marked with no cache flag, remove the flag and
allow it to be cached once the current reference goes away.

Inodes marked as not cached will get cleaned up by the background
inode reclaim or via memory pressure, so they will still generate
some short term cache pressure. They will, however, be reclaimed
much sooner and in preference to cache hot inodes.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ben Myers <bpm@sgi.com>
2012-03-26 17:19:08 -05:00
Linus Torvalds
49d99a2f9c Merge branch 'for-linus' of git://oss.sgi.com/xfs/xfs
Pull XFS updates from Ben Myers:
 "Scalability improvements for dquots, log grant code cleanups, plus
  bugfixes and cleanups large and small"

Fix up various trivial conflicts that were due to some of the earlier
patches already having been integrated into v3.3 as bugfixes, and then
there were development patches on top of those.  Easily merged by just
taking the newer version from the pulled branch.

* 'for-linus' of git://oss.sgi.com/xfs/xfs: (45 commits)
  xfs: fallback to vmalloc for large buffers in xfs_getbmap
  xfs: fallback to vmalloc for large buffers in xfs_attrmulti_attr_get
  xfs: remove remaining scraps of struct xfs_iomap
  xfs: fix inode lookup race
  xfs: clean up minor sparse warnings
  xfs: remove the global xfs_Gqm structure
  xfs: remove the per-filesystem list of dquots
  xfs: use per-filesystem radix trees for dquot lookup
  xfs: per-filesystem dquot LRU lists
  xfs: use common code for quota statistics
  xfs: reimplement fdatasync support
  xfs: split in-core and on-disk inode log item fields
  xfs: make xfs_inode_item_size idempotent
  xfs: log timestamp updates
  xfs: log file size updates at I/O completion time
  xfs: log file size updates as part of unwritten extent conversion
  xfs: do not require an ioend for new EOF calculation
  xfs: use per-filesystem I/O completion workqueues
  quota: make Q_XQUOTASYNC a noop
  xfs: include reservations in quota reporting
  ...
2012-03-23 09:19:22 -07:00
Dave Chinner
c999a223c2 xfs: introduce an allocation workqueue
We currently have significant issues with the amount of stack that
allocation in XFS uses, especially in the writeback path. We can
easily consume 4k of stack between mapping the page, manipulating
the bmap btree and allocating blocks from the free list. Not to
mention btree block readahead and other functionality that issues IO
in the allocation path.

As a result, we can no longer fit allocation in the writeback path
in the stack space provided on x86_64. To alleviate this problem,
introduce an allocation workqueue and move all allocations to a
seperate context. This can be easily added as an interposing layer
into xfs_alloc_vextent(), which takes a single argument structure
and does not return until the allocation is complete or has failed.

To do this, add a work structure and a completion to the allocation
args structure. This allows xfs_alloc_vextent to queue the args onto
the workqueue and wait for it to be completed by the worker. This
can be done completely transparently to the caller.

The worker function needs to ensure that it sets and clears the
PF_TRANS flag appropriately as it is being run in an active
transaction context. Work can also be queued in a memory reclaim
context, so a rescuer is needed for the workqueue.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ben Myers <bpm@sgi.com>
2012-03-22 16:12:24 -05:00
Al Viro
48fde701af switch open-coded instances of d_make_root() to new helper
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-03-20 21:29:35 -04:00
Al Viro
8de5277879 vfs: check i_nlink limits in vfs_{mkdir,rename_dir,link}
New field of struct super_block - ->s_max_links.  Maximal allowed
value of ->i_nlink or 0; in the latter case all checks still need
to be done in ->link/->mkdir/->rename instances.  Note that this
limit applies both to directoris and to non-directories.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-03-20 21:29:32 -04:00
Christoph Hellwig
a05931ceb0 xfs: remove the global xfs_Gqm structure
If we initialize the slab caches for the quota code when XFS is loaded there
is no need for a global and reference counted quota manager structure.  Drop
all this overhead and also fix the error handling during quota initialization.

Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ben Myers <bpm@sgi.com>
2012-03-14 12:06:32 -05:00
Christoph Hellwig
8f639ddea0 xfs: reimplement fdatasync support
Add an in-memory only flag to say we logged timestamps only, and use it to
check if fdatasync can optimize away the log force.

Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
2012-03-13 17:18:14 -05:00
Christoph Hellwig
8a9c9980f2 xfs: log timestamp updates
Timestamps on regular files are the last metadata that XFS does not update
transactionally.  Now that we use the delaylog mode exclusively and made
the log scode scale extremly well there is no need to bypass that code for
timestamp updates.  Logging all updates allows to drop a lot of code, and
will allow for further performance improvements later on.

Note that this patch drops optimized handling of fdatasync - it will be
added back in a separate commit.

Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
2012-03-13 17:01:15 -05:00
Christoph Hellwig
aa6bf01d39 xfs: use per-filesystem I/O completion workqueues
The new concurrency managed workqueues are cheap enough that we can create
per-filesystem instead of global workqueues.  This allows us to remove the
trylock or defer scheme on the ilock, which is not helpful once we have
outstanding log reservations until finishing a size update.

Also allow the default concurrency on this workqueues so that I/O completions
blocking on the ilock for one inode do not block process for another inode.

Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ben Myers <bpm@sgi.com>
2012-03-05 11:07:42 -06:00
Chandra Seetharaman
4177af3a8a Define new macro XFS_ALL_QUOTA_ACTIVE and simply some usage
Define new macro XFS_ALL_QUOTA_ACTIVE and simply some usage
of quota macros.

Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ben Myers <bpm@sgi.com>
2012-02-03 11:32:20 -06:00