Commit Graph

85 Commits

Author SHA1 Message Date
Dave Chinner
95920cd6ce xfs: split remote attribute code out
Adding CRC support to remote attributes adds a significant amount of
remote attribute specific code. Split the existing remote attribute
code out into it's own file so that all the relevant remote
attribute code is in a single, easy to find place.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
2013-04-27 12:49:32 -05:00
Dave Chinner
517c22207b xfs: add CRCs to attr leaf blocks
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
2013-04-27 12:45:01 -05:00
Dave Chinner
f5ea110044 xfs: add CRCs to dir2/da node blocks
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
2013-04-27 12:33:38 -05:00
Jeff Liu
a21cd50367 xfs: refactor space log reservation for XFS_TRANS_ATTR_SET
Currently, we calculate the attribute set transaction
log space reservation at runtime in two parts:

1) XFS_ATTRSET_LOG_RES() which is calcuated out at mount time.

2) ((ext * (mp)->m_sb.sb_sectsize) + \
    (ext * XFS_FSB_TO_B((mp), XFS_BM_MAXLEVELS(mp, XFS_ATTR_FORK))) + \
    (128 * (ext + (ext * XFS_BM_MAXLEVELS(mp, XFS_ATTR_FORK))))))
which is calculated out at runtime since it depend on the given extent length in blocks.

This patch renamed XFS_ATTRSET_LOG_RES(mp) to XFS_ATTRSETM_LOG_RES(mp) to indicate
that it is figured out at mount time.  Introduce XFS_ATTRSETRT_LOG_RES(mp) which would
be used to calculate out the unit of the log space reservation for one block.

In this way, the total runtime space for the given extent length can be figured out by:
XFS_ATTRSETM_LOG_RES(mp) + XFS_ATTRSETRT_LOG_RES(mp) * ext

Signed-off-by: Jie Liu <jeff.liu@oracle.com>
CC: Dave Chinner <david@fromorbit.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
2013-02-01 14:56:31 -06:00
Dave Chinner
d9392a4bb7 xfs: add xfs_da_node verification
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Phil White <pwhite@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
2012-11-15 21:34:55 -06:00
Dave Chinner
ad14c33ac8 xfs: factor and verify attr leaf reads
Some reads are not converted yet because it isn't obvious ahead of
time what the format of the block is going to be. Need to determine
how to tell if the first block in the tree is a node or leaf format
block. That will be done in later patches.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Phil White <pwhite@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
2012-11-15 21:34:52 -06:00
Dave Chinner
4bb20a83a2 xfs: add verifier callback to directory read code
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Phil White <pwhite@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
2012-11-15 21:34:36 -06:00
Dave Chinner
c3f8fc73ac xfs: make buffer read verication an IO completion function
Add a verifier function callback capability to the buffer read
interfaces.  This will be used by the callers to supply a function
that verifies the contents of the buffer when it is read from disk.
This patch does not provide callback functions, but simply modifies
the interfaces to allow them to be called.

The reason for adding this to the read interfaces is that it is very
difficult to tell fom the outside is a buffer was just read from
disk or whether we just pulled it out of cache. Supplying a callbck
allows the buffer cache to use it's internal knowledge of the buffer
to execute it only when the buffer is read from disk.

It is intended that the verifier functions will mark the buffer with
an EFSCORRUPTED error when verification fails. This allows the
reading context to distinguish a verification error from an IO
error, and potentially take further actions on the buffer (e.g.
attempt repair) based on the error reported.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Phil White <pwhite@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
2012-11-15 21:34:02 -06:00
Dave Chinner
ee73259b40 xfs: add more attribute tree trace points.
Added when debugging recent attribute tree problems to more finely
trace code execution through the maze of twisty passages that makes
up the attr code.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
2012-11-13 14:47:00 -06:00
Dave Chinner
1d9025e561 xfs: remove struct xfs_dabuf and infrastructure
The struct xfs_dabuf now only tracks a single xfs_buf and all the
information it holds can be gained directly from the xfs_buf. Hence
we can remove the struct dabuf and pass the xfs_buf around
everywhere.

Kill the struct dabuf and the associated infrastructure.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ben Myers <bpm@sgi.com>
2012-07-01 14:50:07 -05:00
Dave Chinner
2a0ec1d9ed xfs: move xfs_get_extsz_hint() and kill xfs_rw.h
The only thing left in xfs_rw.h is a function prototype for an inode
function.  Move that to xfs_inode.h, and kill xfs_rw.h.

Also move the function implementing the prototype from xfs_rw.c to
xfs_inode.c so we only have one function left in xfs_rw.c

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ben Myers <bpm@sgi.com>
2012-05-14 16:20:58 -05:00
Dave Chinner
60a34607b2 xfs: move xfsagino_t to xfs_types.h
Untangle the header file includes a bit by moving the definition of
xfs_agino_t to xfs_types.h. This removes the dependency that xfs_ag.h has on
xfs_inum.h, meaning we don't need to include xfs_inum.h everywhere we include
xfs_ag.h.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
2012-05-14 16:20:54 -05:00
Dave Chinner
aa5c158ec9 xfs: kill XBF_DONTBLOCK
Just about all callers of xfs_buf_read() and xfs_buf_get() use XBF_DONTBLOCK.
This is used to make memory allocation use GFP_NOFS rather than GFP_KERNEL to
avoid recursion through memory reclaim back into the filesystem.

All the blocking get calls in growfs occur inside a transaction, even though
they are no part of the transaction, so all allocation will be GFP_NOFS due to
the task flag PF_TRANS being set. The blocking read calls occur during log
recovery, so they will probably be unaffected by converting to GFP_NOFS
allocations.

Hence make XBF_DONTBLOCK behaviour always occur for buffers and kill the flag.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
2012-05-14 16:20:52 -05:00
Dave Chinner
7ca790a507 xfs: kill xfs_read_buf()
xfs_read_buf() is effectively the same as xfs_trans_read_buf() when called
outside a transaction context. The error handling is slightly different in that
xfs_read_buf stales the errored buffer it gets back, but there is probably good
reason for xfs_trans_read_buf() for doing this.

Hence update xfs_trans_read_buf() to the same error handling as xfs_read_buf(),
and convert all the callers of xfs_read_buf() to use the former function. We can
then remove xfs_read_buf().

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
2012-05-14 16:20:51 -05:00
Dave Chinner
a8acad7073 xfs: kill XBF_LOCK
Buffers are always returned locked from the lookup routines. Hence
we don't need to tell the lookup routines to return locked buffers,
on to try and lock them. Remove XBF_LOCK from all the callers and
from internal buffer cache usage.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
2012-05-14 16:20:50 -05:00
Dave Chinner
4e94b71b70 xfs: use blocks for counting length of buffers
Now that we pass block counts everywhere, and index buffers by block
number, track the length of the buffer in units of blocks rather
than bytes. Convert the code to use block counts, and those that
need byte counts get converted at the time of use.

Also, remove the XFS_BUF_{SET_}SIZE() macros that are just wrappers
around the buffer length. They only serve to make the code shouty
loud and don't actually add any real value.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
2012-05-14 16:20:47 -05:00
Dave Chinner
5a5881cdee xfs: add lots of attribute trace points
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
2012-03-27 17:18:21 -05:00
Christoph Hellwig
673e8e597c xfs: remove xfs_itruncate_data
This wrapper isn't overly useful, not to say rather confusing.

Around the call to xfs_itruncate_extents it does:

 - add tracing
 - add a few asserts in debug builds
 - conditionally update the inode size in two places
 - log the inode

Both the tracing and the inode logging can be moved to xfs_itruncate_extents
as they are useful for the attribute fork as well - in fact the attr code
already does an equivalent xfs_trans_log_inode call just after calling
xfs_itruncate_extents.  The conditional size updates are a mess, and there
was no reason to do them in two places anyway, as the first one was
conditional on the inode having extents - but without extents we
xfs_itruncate_extents would be a no-op and the placement wouldn't matter
anyway.  Instead move the size assignments and the asserts that make sense
to the callers that want it.

As a side effect of this clean up xfs_setattr_size by introducing variables
for the old and new inode size, and moving the size updates into a common
place.

Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ben Myers <bpm@sgi.com>
2012-01-13 12:11:45 -06:00
Christoph Hellwig
af5c4bee49 xfs: remove buffers from the delwri list in xfs_buf_stale
For each call to xfs_buf_stale we call xfs_buf_delwri_dequeue either
directly before or after it, or are guaranteed by the surrounding
conditionals that we are never called on delwri buffers.  Simply
this situation by moving the call to xfs_buf_delwri_dequeue into
xfs_buf_stale.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
2011-10-11 21:15:10 -05:00
Christoph Hellwig
c867cb6164 xfs: remove XFS_BUF_STALE and XFS_BUF_SUPER_STALE
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
2011-10-11 21:15:10 -05:00
Christoph Hellwig
ddc3415aba xfs: simplify xfs_trans_ijoin* again
There is no reason to keep a reference to the inode even if we unlock
it during transaction commit because we never drop a reference between
the ijoin and commit.  Also use this fact to merge xfs_trans_ijoin_ref
back into xfs_trans_ijoin - the third argument decides if an unlock
is needed now.

I'm actually starting to wonder if allowing inodes to be unlocked
at transaction commit really is worth the effort.  The only real
benefit is that they can be unlocked earlier when commiting a
synchronous transactions, but that could be solved by doing the
log force manually after the unlock, too.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
2011-10-11 21:15:08 -05:00
Dave Chinner
c0dc7828af xfs: rename xfs_bmapi to xfs_bmapi_write
Now that all the read-only users of xfs_bmapi have been converted to
use xfs_bmapi_read(), we can remove all the read-only handling cases
from xfs_bmapi().

Once this is done, rename xfs_bmapi to xfs_bmapi_write to reflect
the fact it is for allocation only. This enables us to kill the
XFS_BMAPI_WRITE flag as well.

Also clean up xfs_bmapi_write to the style used in the newly added
xfs_bmapi_read/delay functions.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
2011-10-11 21:15:04 -05:00
Dave Chinner
5c8ed2021f xfs: introduce xfs_bmapi_read()
xfs_bmapi() currently handles both extent map reading and
allocation. As a result, the code is littered with "if (wr)"
branches to conditionally do allocation operations if required.
This makes the code much harder to follow and causes significant
indent issues with the code.

Given that read mapping is much simpler than allocation, we can
split out read mapping from xfs_bmapi() and reuse the logic that
we have already factored out do do all the hard work of handling the
extent map manipulations. The results in a much simpler function for
the common extent read operations, and will allow the allocation
code to be simplified in another commit.

Once xfs_bmapi_read() is implemented, convert all the callers of
xfs_bmapi() that are only reading extents to use the new function.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
2011-10-11 21:15:03 -05:00
Chandra Seetharaman
b522950f0a xfs: Check the return value of xfs_buf_get()
Check the return value of xfs_buf_get() and fail appropriately.

Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
2011-10-11 21:15:01 -05:00
Christoph Hellwig
859f57ca00 xfs: avoid synchronous transactions when deleting attr blocks
Currently xfs_attr_inactive causes a synchronous transactions if we are
removing a file that has any extents allocated to the attribute fork, and
thus makes XFS extremely slow at removing files with out of line extended
attributes. The code looks a like a relict from the days before the busy
extent list, but with the busy extent list we avoid reusing data and attr
extents that have been freed but not commited yet, so this code is just
as superflous as the synchronous transactions for data blocks.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reported-by: Bernd Schubert <bernd.schubert@itwm.fraunhofer.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
2011-10-11 21:15:01 -05:00
Christoph Hellwig
c2b006c1da xfs: let xfs_bwrite callers handle the xfs_buf_relse
Remove the xfs_buf_relse from xfs_bwrite and let the caller handle it to
mirror the delwri and read paths.

Also remove the mount pointer passed to xfs_bwrite, which is superflous now
that we have a mount pointer in the buftarg.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
2011-10-11 21:15:00 -05:00
Christoph Hellwig
61551f1ee5 xfs: call xfs_buf_delwri_queue directly
Unify the ways we add buffers to the delwri queue by always calling
xfs_buf_delwri_queue directly.  The xfs_bdwrite functions is removed and
opencoded in its callers, and the two places setting XBF_DELWRI while a
buffer is locked and expecting xfs_buf_unlock to pick it up are converted
to call xfs_buf_delwri_queue directly, too.  Also replace the
XFS_BUF_UNDELAYWRITE macro with direct calls to xfs_buf_delwri_dequeue
to make the explicit queuing/dequeuing more obvious.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
2011-10-11 21:14:59 -05:00
Chandra Seetharaman
5a52c2a581 xfs: Remove the macro XFS_BUF_ERROR and family
Remove the definitions and usage of the macros XFS_BUF_ERROR,
XFS_BUF_GETERROR and XFS_BUF_ISERROR.

Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
2011-07-25 14:57:46 -05:00
Christoph Hellwig
69ef921b55 xfs: byteswap constants instead of variables
Micro-optimize various comparisms by always byteswapping the constant
instead of the variable, which allows to do the swap at compile instead
of runtime.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Alex Elder <aelder@sgi.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
2011-07-08 14:36:05 +02:00
Christoph Hellwig
8f04c47aa9 xfs: split xfs_itruncate_finish
Split the guts of xfs_itruncate_finish that loop over the existing extents
and calls xfs_bunmapi on them into a new helper, xfs_itruncate_externs.
Make xfs_attr_inactive call it directly instead of xfs_itruncate_finish,
which allows to simplify the latter a lot, by only letting it deal with
the data fork.  As a result xfs_itruncate_finish is renamed to
xfs_itruncate_data to make its use case more obvious.

Also remove the sync parameter from xfs_itruncate_data, which has been
unessecary since the introduction of the busy extent list in 2002, and
completely dead code since 2003 when the XFS_BMAPI_ASYNC parameter was
made a no-op.

I can't actually see why the xfs_attr_inactive needs to set the transaction
sync, but let's keep this patch simple and without changes in behaviour.

Also avoid passing a useless argument to xfs_isize_check, and make it
private to xfs_inode.c.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Alex Elder <aelder@sgi.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
2011-07-08 14:34:34 +02:00
Dave Chinner
4a33821236 xfs: prevent bogus assert when trying to remove non-existent attribute
If the attribute fork on an inode is in btree format and has
multiple levels (i.e node format rather than leaf format), then a
lookup failure will trigger an assert failure in xfs_da_path_shift
if the flag XFS_DA_OP_OKNOENT is not set. This flag is used to
indicate to the directory btree code that not finding an entry is
not a fatal error. In the case of doing a lookup for a directory
name removal, this is valid as a user cannot insert an arbitrary
name to remove from the directory btree.

However, in the case of the attribute tree, a user has direct
control over the attribute name and can ask for any random name to
be removed without any validation. In this case, fsstress is asking
for a non-existent user.selinux attribute to be removed, and that is
causing xfs_da_path_shift() to fall off the bottom of the tree where
it asserts that a lookup failure is allowed. Because the flag is not
set, we die a horrible death on a debug enable kernel.

Prevent this assert from firing on attribute removes by adding the
op_flag XFS_DA_OP_OKNOENT to atribute removal operations.

Discovered when testing on a SELinux enabled system by fsstress in
test 070 by trying to remove a non-existent user.selinux attribute.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
2011-06-23 22:13:51 -05:00
Christoph Hellwig
1a1a3e97ba xfs: remove xfs_buf wrappers
Stop having two different names for many buffer functions and use
the more descriptive xfs_buf_* names directly.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
2010-10-18 15:08:07 -05:00
Dave Chinner
dcd79a1423 xfs: don't use vfs writeback for pure metadata modifications
Under heavy multi-way parallel create workloads, the VFS struggles
to write back all the inodes that have been changed in age order.
The bdi flusher thread becomes CPU bound, spending 85% of it's time
in the VFS code, mostly traversing the superblock dirty inode list
to separate dirty inodes old enough to flush.

We already keep an index of all metadata changes in age order - in
the AIL - and continued log pressure will do age ordered writeback
without any extra overhead at all. If there is no pressure on the
log, the xfssyncd will periodically write back metadata in ascending
disk address offset order so will be very efficient.

Hence we can stop marking VFS inodes dirty during transaction commit
or when changing timestamps during transactions. This will keep the
inodes in the superblock dirty list to those containing data or
unlogged metadata changes.

However, the timstamp changes are slightly more complex than this -
there are a couple of places that do unlogged updates of the
timestamps, and the VFS need to be informed of these. Hence add a
new function xfs_trans_ichgtime() for transactional changes,
and leave xfs_ichgtime() for the non-transactional changes.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Alex Elder <aelder@sgi.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
2010-10-18 15:07:45 -05:00
Christoph Hellwig
b4e9181e77 xfs: remove unused delta tracking code in xfs_bmapi
This code was introduced four years ago in commit
3e57ecf640 without any review and has
been unused since.  Remove it just as the rest of the code introduced
in that commit to reduce that stack usage and complexity in this central
piece of code.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
2010-07-26 13:16:39 -05:00
Christoph Hellwig
898621d5a7 xfs: simplify inode to transaction joining
Currently we need to either call IHOLD or xfs_trans_ihold on an inode when
joining it to a transaction via xfs_trans_ijoin.

This patches instead makes xfs_trans_ijoin usable on it's own by doing
an implicity xfs_trans_ihold, which also allows us to drop the third
argument.  For the case where we want to hold a reference on the inode
a xfs_trans_ijoin_ref wrapper is added which does the IHOLD and marks
the inode for needing an xfs_iput.  In addition to the cleaner interface
to the caller this also simplifies the implementation.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
2010-07-26 13:16:36 -05:00
Christoph Hellwig
3400777ff0 xfs: remove unneeded #include statements
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
2010-07-26 13:16:33 -05:00
Christoph Hellwig
288699feca xfs: drop dmapi hooks
Dmapi support was never merged upstream, but we still have a lot of hooks
bloating XFS for it, all over the fast pathes of the filesystem.

This patch drops over 700 lines of dmapi overhead.  If we'll ever get HSM
support in mainline at least the namespace events can be done much saner
in the VFS instead of the individual filesystem, so it's not like this
is much help for future work.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
2010-07-26 13:16:33 -05:00
Christoph Hellwig
0cadda1c5f xfs: remove duplicate buffer flags
Currently we define aliases for the buffer flags in various
namespaces, which only adds confusion.  Remove all but the XBF_
flags to clean this up a bit.

Note that we still abuse XFS_B_ASYNC/XBF_ASYNC for some non-buffer
uses, but I'll clean that up later.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
2010-01-21 13:44:36 -06:00
Dave Chinner
a9273ca5c6 xfs: convert attr to use unsigned names
To be consistent with the directory code, the attr code should use
unsigned names. Convert the names from the vfs at the highest level
to unsigned, and ænsure they are consistenly used as unsigned down
to disk.

Signed-off-by: Dave Chinner <david@fromorbit.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
2010-01-20 10:47:48 +11:00
Eric Sandeen
5d77c0dc0c xfs: make several more functions static
Just minor housekeeping, a lot more functions can be trivially made
static; others could if we reordered things a bit...

Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: Alex Elder <aelder@sgi.com>
2010-01-15 15:31:38 -06:00
Christoph Hellwig
0b1b213fcf xfs: event tracing support
Convert the old xfs tracing support that could only be used with the
out of tree kdb and xfsidbg patches to use the generic event tracer.

To use it make sure CONFIG_EVENT_TRACING is enabled and then enable
all xfs trace channels by:

   echo 1 > /sys/kernel/debug/tracing/events/xfs/enable

or alternatively enable single events by just doing the same in one
event subdirectory, e.g.

   echo 1 > /sys/kernel/debug/tracing/events/xfs/xfs_ihold/enable

or set more complex filters, etc. In Documentation/trace/events.txt
all this is desctribed in more detail.  To reads the events do a

   cat /sys/kernel/debug/tracing/trace

Compared to the last posting this patch converts the tracing mostly to
the one tracepoint per callsite model that other users of the new
tracing facility also employ.  This allows a very fine-grained control
of the tracing, a cleaner output of the traces and also enables the
perf tool to use each tracepoint as a virtual performance counter,
     allowing us to e.g. count how often certain workloads git various
     spots in XFS.  Take a look at

    http://lwn.net/Articles/346470/

for some examples.

Also the btree tracing isn't included at all yet, as it will require
additional core tracing features not in mainline yet, I plan to
deliver it later.

And the really nice thing about this patch is that it actually removes
many lines of code while adding this nice functionality:

 fs/xfs/Makefile                |    8
 fs/xfs/linux-2.6/xfs_acl.c     |    1
 fs/xfs/linux-2.6/xfs_aops.c    |   52 -
 fs/xfs/linux-2.6/xfs_aops.h    |    2
 fs/xfs/linux-2.6/xfs_buf.c     |  117 +--
 fs/xfs/linux-2.6/xfs_buf.h     |   33
 fs/xfs/linux-2.6/xfs_fs_subr.c |    3
 fs/xfs/linux-2.6/xfs_ioctl.c   |    1
 fs/xfs/linux-2.6/xfs_ioctl32.c |    1
 fs/xfs/linux-2.6/xfs_iops.c    |    1
 fs/xfs/linux-2.6/xfs_linux.h   |    1
 fs/xfs/linux-2.6/xfs_lrw.c     |   87 --
 fs/xfs/linux-2.6/xfs_lrw.h     |   45 -
 fs/xfs/linux-2.6/xfs_super.c   |  104 ---
 fs/xfs/linux-2.6/xfs_super.h   |    7
 fs/xfs/linux-2.6/xfs_sync.c    |    1
 fs/xfs/linux-2.6/xfs_trace.c   |   75 ++
 fs/xfs/linux-2.6/xfs_trace.h   | 1369 +++++++++++++++++++++++++++++++++++++++++
 fs/xfs/linux-2.6/xfs_vnode.h   |    4
 fs/xfs/quota/xfs_dquot.c       |  110 ---
 fs/xfs/quota/xfs_dquot.h       |   21
 fs/xfs/quota/xfs_qm.c          |   40 -
 fs/xfs/quota/xfs_qm_syscalls.c |    4
 fs/xfs/support/ktrace.c        |  323 ---------
 fs/xfs/support/ktrace.h        |   85 --
 fs/xfs/xfs.h                   |   16
 fs/xfs/xfs_ag.h                |   14
 fs/xfs/xfs_alloc.c             |  230 +-----
 fs/xfs/xfs_alloc.h             |   27
 fs/xfs/xfs_alloc_btree.c       |    1
 fs/xfs/xfs_attr.c              |  107 ---
 fs/xfs/xfs_attr.h              |   10
 fs/xfs/xfs_attr_leaf.c         |   14
 fs/xfs/xfs_attr_sf.h           |   40 -
 fs/xfs/xfs_bmap.c              |  507 +++------------
 fs/xfs/xfs_bmap.h              |   49 -
 fs/xfs/xfs_bmap_btree.c        |    6
 fs/xfs/xfs_btree.c             |    5
 fs/xfs/xfs_btree_trace.h       |   17
 fs/xfs/xfs_buf_item.c          |   87 --
 fs/xfs/xfs_buf_item.h          |   20
 fs/xfs/xfs_da_btree.c          |    3
 fs/xfs/xfs_da_btree.h          |    7
 fs/xfs/xfs_dfrag.c             |    2
 fs/xfs/xfs_dir2.c              |    8
 fs/xfs/xfs_dir2_block.c        |   20
 fs/xfs/xfs_dir2_leaf.c         |   21
 fs/xfs/xfs_dir2_node.c         |   27
 fs/xfs/xfs_dir2_sf.c           |   26
 fs/xfs/xfs_dir2_trace.c        |  216 ------
 fs/xfs/xfs_dir2_trace.h        |   72 --
 fs/xfs/xfs_filestream.c        |    8
 fs/xfs/xfs_fsops.c             |    2
 fs/xfs/xfs_iget.c              |  111 ---
 fs/xfs/xfs_inode.c             |   67 --
 fs/xfs/xfs_inode.h             |   76 --
 fs/xfs/xfs_inode_item.c        |    5
 fs/xfs/xfs_iomap.c             |   85 --
 fs/xfs/xfs_iomap.h             |    8
 fs/xfs/xfs_log.c               |  181 +----
 fs/xfs/xfs_log_priv.h          |   20
 fs/xfs/xfs_log_recover.c       |    1
 fs/xfs/xfs_mount.c             |    2
 fs/xfs/xfs_quota.h             |    8
 fs/xfs/xfs_rename.c            |    1
 fs/xfs/xfs_rtalloc.c           |    1
 fs/xfs/xfs_rw.c                |    3
 fs/xfs/xfs_trans.h             |   47 +
 fs/xfs/xfs_trans_buf.c         |   62 -
 fs/xfs/xfs_vnodeops.c          |    8
 70 files changed, 2151 insertions(+), 2592 deletions(-)

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
2009-12-14 23:08:16 -06:00
Christoph Hellwig
e82fa0c7ca xfs: rename xfs_attr_fetch to xfs_attr_get_int
Using a totally different name for the low-level get operation does
not fit the _int convention used in the rest of the attr code, so
rename it.

While we're at it also fix the prototype to use the normal convention
and mark it static as it's never used outside of xfs_attr.c.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Reviewed-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: Alex Elder <aelder@sgi.com>
2009-12-11 15:11:22 -06:00
Christoph Hellwig
6ad112bfb5 xfs: simplify xfs_buf_get / xfs_buf_read interfaces
Currently the low-level buffer cache interfaces are highly confusing
as we have a _flags variant of each that does actually respect the
flags, and one without _flags which has a flags argument that gets
ignored and overriden with a default set.  Given that very few places
use the default arguments get rid of the duplication and convert all
callers to pass the flags explicitly.  Also remove the now confusing
_flags postfix.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
2009-12-11 15:11:21 -06:00
Christoph Hellwig
ddd3a14e0f xfs: switch to NOFS allocation under i_lock in xfs_attr_rmtval_get
xfs_attr_rmtval_get is always called with i_lock held, but i_lock is taken
in reclaim context so all allocations under it must avoid recursions into
the filesystem.

Reported by the new reclaim context tracing in lockdep.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Felix Blyakher <felixb@sgi.com>
Signed-off-by: Felix Blyakher <felixb@sgi.com>
2009-08-12 01:08:01 -05:00
Christoph Hellwig
10746e47e7 xfs: switch to NOFS allocation under i_lock in xfs_attr_rmtval_set
xfs_attr_rmtval_set is always called with i_lock held, and i_lock is taken
in reclaim context so all allocations under it must avoid recursions into
the filesystem.

Reported by the new reclaim context tracing in lockdep.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Felix Blyakher <felixb@sgi.com>
Signed-off-by: Felix Blyakher <felixb@sgi.com>
2009-08-12 01:07:44 -05:00
Christoph Hellwig
ef14f0c157 xfs: use generic Posix ACL code
This patch rips out the XFS ACL handling code and uses the generic
fs/posix_acl.c code instead.  The ondisk format is of course left
unchanged.

This also introduces the same ACL caching all other Linux filesystems do
by adding pointers to the acl and default acl in struct xfs_inode.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Eric Sandeen <sandeen@sandeen.net>
2009-06-10 17:07:47 +02:00
Christoph Hellwig
7d095257e3 xfs: kill xfs_qmops
Kill the quota ops function vector and replace it with direct calls or
stubs in the CONFIG_XFS_QUOTA=n case.

Make sure we check XFS_IS_QUOTA_RUNNING in the right spots.  We can remove
the number of those checks because the XFS_TRANS_DQ_DIRTY flag can't be set
otherwise.

This brings us back closer to the way this code worked in IRIX and earlier
Linux versions, but we keep a lot of the more useful factoring of common
code.

Eventually we should also kill xfs_qm_bhv.c, but that's left for a later
patch.

Reduces the size of the source code by about 250 lines and the size of
XFS module by about 1.5 kilobytes with quotas enabled:

   text	   data	    bss	    dec	    hex	filename
 615957	   2960	   3848	 622765	  980ad	fs/xfs/xfs.o
 617231	   3152	   3848	 624231	  98667	fs/xfs/xfs.o.old

Fallout:

 - xfs_qm_dqattach is split into xfs_qm_dqattach_locked which expects
   the inode locked and xfs_qm_dqattach which does the locking around it,
   thus removing XFS_QMOPT_ILOCKED.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Eric Sandeen <sandeen@sandeen.net>
2009-06-08 15:33:32 +02:00
Eric Sandeen
9d87c3192d [XFS] Remove the rest of the macro-to-function indirections.
Remove the last of the macros-defined-to-static-functions.

Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Reviewed-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2009-01-16 17:10:42 +11:00
Niv Sardi
322ff6b8cd [XFS] Move xfs_attr_rolltrans to xfs_trans_roll
Move it from the attr code to the transaction code and make
the attr code call the new function.

We rolltrans is really usefull whenever we want to use rolling
transaction, should be generic, it isn't dependent on any part
of the attr code anyway.

We use this excuse to change all the:

if ((error = xfs_attr_rolltrans()))

calls into:

error = xfs_trans_roll();

if (error)

SGI-PV: 981498

SGI-Modid: xfs-linux-melb:xfs-kern:31729a

Signed-off-by: Niv Sardi <xaiki@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-08-13 16:05:49 +10:00
Niv Sardi
5e9da7b7a1 [XFS] Move attr log alloc size calculator to another function.
We will need that to be able to calculate the size of log we need for a
specific attr (for Create+EA). The local flag is needed so that we can
fail if we run into ENOSPC when trying to alloc blocks.

SGI-PV: 981498

SGI-Modid: xfs-linux-melb:xfs-kern:31727a

Signed-off-by: Niv Sardi <xaiki@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Tim Shimmin <tes@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-08-13 16:03:35 +10:00