Commit Graph

32 Commits

Author SHA1 Message Date
Theodore Ts'o
a0b30c1229 ext4: use module parameters instead of debugfs for mballoc_debug
There are multiple reasons to move away from debugfs.  First of all,
we are only using it for a single parameter, and it is much more
complicated to set up (some 30 lines of code compared to 3), and one
more thing that might fail while loading the ext4 module.

Secondly, as a module paramter it can be specified as a boot option if
ext4 is built into the kernel, or as a parameter when the module is
loaded, and it can also be manipulated dynamically under
/sys/module/ext4/parameters/mballoc_debug.  So it is more flexible.

Ultimately we want to move away from using mb_debug() towards
tracepoints, but for now this is still a useful simplification of the
code base.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2013-02-09 16:28:20 -05:00
Robin Dong
cc6eb18d68 ext4: remove unused macro MB_DEFAULT_MAX_GROUPS_TO_SCAN
Signed-off-by: Robin Dong <sanbai@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-08-17 10:00:17 -04:00
Theodore Ts'o
c5e8f3f3bc ext4: remove EXT4_MB_{BITMAP,BUDDY} macros
The EXT4_MB_BITMAP and EXT4_MB_BUDDY macros obfuscate more than they
provide any abstraction.   So remove them.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-02-20 17:54:06 -05:00
Bobi Jam
18aadd47f8 ext4: expand commit callback and
The per-commit callback was used by mballoc code to manage free space
bitmaps after deleted blocks have been released.  This patch expands
it to support multiple different callbacks, to allow other things to
be done after the commit has been completed.

Signed-off-by: Bobi Jam <bobijam@whamcloud.com>
Signed-off-by: Andreas Dilger <adilger@whamcloud.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-02-20 17:53:02 -05:00
Robin Dong
ff3fc1736f ext4: fix a typo in struct ext4_allocation_context
This patch changes "bext" to "best".

Signed-off-by: Robin Dong <sanbai@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-10-31 18:55:50 -04:00
Theodore Ts'o
84130193e0 ext4: teach ext4_free_blocks() about bigalloc and clusters
The ext4_free_blocks() function now has two new flags that indicate
whether a partial cluster at the beginning or the end of the block
extents should be freed or not.  That will be up the caller (i.e.,
truncate), who can figure out whether partial clusters at the
beginning or the end of a block range can be freed.

We also have to update the ext4_mb_free_metadata() and
release_blocks_on_commit() machinery to be cluster-based, since it is
used by ext4_free_blocks().

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-09-09 18:50:51 -04:00
Theodore Ts'o
53accfa9f8 ext4: teach mballoc preallocation code about bigalloc clusters
In most of mballoc.c, we do everything in units of clusters, since the
block allocation bitmaps and buddy bitmaps are all denominated in
clusters.  The one place where we do deal with absolute block numbers
is in the code that handles the preallocation regions, since in the
case of inode-based preallocation regions, the start of the
preallocation region can't be relative to the beginning of the group.

So this adds a bit of complexity, where pa_pstart and pa_lstart are
block numbers, while pa_free, pa_len, and fe_len are denominated in
units of clusters.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-09-09 18:48:51 -04:00
Theodore Ts'o
3212a80a58 ext4: convert block group-relative offsets to use clusters
Certain parts of the ext4 code base, primarily in mballoc.c, use a
block group number and offset from the beginning of the block group.
This offset is invariably used to index into the allocation bitmap, so
change the offset to be denominated in units of clusters.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-09-09 18:46:51 -04:00
Tao Ma
6a0fe49308 ext4: remove ac_repeats from ext4_allocation_context
ac_repeats isn't referenced in the mballoc code. So remove it.

Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-07-23 16:18:55 -04:00
Amir Goldstein
44183d4231 ext4: remove alloc_semp
After taking care of all group init races, all that remains is to
remove alloc_semp from ext4_allocation_context and ext4_buddy structs.

Signed-off-by: Amir Goldstein <amir73il@users.sf.net>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-05-09 21:52:36 -04:00
Coly Li
58696f3ab2 ext4: clarify description of ac_g_ex in struct ext4_allocation_context
Signed-off-by: Coly Li <bosong.ly@taobao.com>
Cc: Alex Tomas <alex@clusterfs.com>
Cc: Theodore Tso <tytso@google.com>
2011-02-24 14:10:00 -05:00
Akinobu Mita
731eb1a03a ext4: consolidate in_range() definitions
There are duplicate macro definitions of in_range() in mballoc.h and
balloc.c.  This consolidates these two definitions into ext4.h, and
changes extents.c to use in_range() as well.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: Andreas Dilger <adilger@sun.com>
2010-03-03 23:55:01 -05:00
Akinobu Mita
5661bd6861 ext4: cleanup to use ext4_group_first_block_no()
This is a cleanup and simplification patch which takes some open-coded
calculations to calculate the first block number of a group and
converts them to use the (already defined) ext4_group_first_block_no()
function.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: Andreas Dilger <adilger@sun.com>
2010-03-03 23:53:39 -05:00
Huang Weiyi
149feb00d7 ext4: remove unused #include <linux/version.h>
Remove unused #include <linux/version.h>('s) in
  fs/ext4/block_validity.c
  fs/ext4/mballoc.h

Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2009-12-14 09:24:20 -05:00
Theodore Ts'o
296c355cd6 ext4: Use tracepoints for mb_history trace file
The /proc/fs/ext4/<dev>/mb_history was maintained manually, and had a
number of problems: it required a largish amount of memory to be
allocated for each ext4 filesystem, and the s_mb_history_lock
introduced a CPU contention problem.  

By ripping out the mb_history code and replacing it with ftrace
tracepoints, and we get more functionality: timestamps, event
filtering, the ability to correlate mballoc history with other ext4
tracepoints, etc.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2009-09-30 00:32:42 -04:00
Theodore Ts'o
90576c0b9a ext4, jbd2: Drop unneeded printks at mount and unmount time
There are a number of kernel printk's which are printed when an ext4
filesystem is mounted and unmounted.  Disable them to economize space
in the system logs.  In addition, disabling the mballoc stats by
default saves a number of unneeded atomic operations for every block
allocation or deallocation.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2009-09-29 15:51:30 -04:00
Eric Sandeen
a36b44988c ext4: use ext4_grpblk_t more extensively
unsigned  short is potentially too small to track blocks within
a group; today it is safe due to restrictions in e2fsprogs but
we have _lo / _hi bits for group blocks with the intent to go
up to 32 bits, so clean this up now.

There are many more places where we use unsigned/int/unsigned int
to contain a group block but this should at least fix all the
short types.

I added a few comments to the struct ext4_group_info definition
as well.

Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2009-08-25 22:36:45 -04:00
Theodore Ts'o
6ba495e925 ext4: Add configurable run-time mballoc debugging
Allow mballoc debugging to be enabled at run-time instead of just at
compile time.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2009-09-18 13:38:55 -04:00
Theodore Ts'o
9bffad1ed2 ext4: convert instrumentation from markers to tracepoints
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2009-06-17 11:48:11 -04:00
Theodore Ts'o
bb23c20a85 ext4: Move fs/ext4/group.h into ext4.h
Move the function prototypes in group.h into ext4.h so they are all
defined in one place.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2009-05-01 19:44:44 -04:00
Aneesh Kumar K.V
cc0fb9ad7d ext4: Rename pa_linear to pa_type
Impact: code cleanup

This patch rename pa_linear to pa_type and add MB_INODE_PA
and MB_GROUP_PA to indicate inode and group prealloc space.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2009-03-27 17:16:58 -04:00
Mike Snitzer
074ca44283 ext4: Remove stale block allocator references from ext4.h
Remove some leftovers from when the old block allocator was removed
(c2ea3fde).  ext4_sb_info is now a bit lighter.  Also remove a dangling
read_block_bitmap() prototype.

Signed-off-by: Mike Snitzer <snitzer@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2009-02-06 16:23:37 -05:00
Aneesh Kumar K.V
8556e8f3b6 ext4: Don't allow new groups to be added during block allocation
After we mark the blocks in the buddy cache as allocated,
we need to ensure that we don't reinit the buddy cache until
the block bitmap is updated.  This commit achieves this by holding
the group_info alloc_semaphore till ext4_mb_release_context

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@kernel.org
2009-01-05 21:46:55 -05:00
Aneesh Kumar K.V
5d1b1b3f49 ext4: fix BUG when calling ext4_error with locked block group
The mballoc code likes to call ext4_error while it is holding locked
block groups.  This can causes a scheduling in atomic context BUG.  We
can't just unlock the block group and relock it after/if ext4_error
returns since that might result in race conditions in the case where
the filesystem is set to continue after finding errors.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2009-01-05 22:19:52 -05:00
Aneesh Kumar K.V
c3a326a657 ext4: cleanup mballoc header files
Move some of the forward declaration of the static functions
to mballoc.c where they are used. This enables us to include
mballoc.h in other .c files. Also correct the buddy cache
documentation.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-11-25 15:11:52 -05:00
Aneesh Kumar K.V
920313a726 ext4: Use EXT4_GROUP_INFO_NEED_INIT_BIT during resize
The new groups added during resize are flagged as
need_init group. Make sure we properly initialize these
groups. When we have block size < page size and we are adding
new groups the page may still be marked uptodate even though
we haven't initialized the group. While forcing the init
of buddy cache we need to make sure other groups part of the
same page of buddy cache is not using the cache.
group_info->alloc_sem is added to ensure the same.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
cc: stable@kernel.org
2009-01-05 21:36:19 -05:00
Theodore Ts'o
3e624fc72f ext4: Replace hackish ext4_mb_poll_new_transaction with commit callback
The multiblock allocator needs to be able to release blocks (and issue
a blkdev discard request) when the transaction which freed those
blocks is committed.  Previously this was done via a polling mechanism
when blocks are allocated or freed.  A much better way of doing things
is to create a jbd2 callback function and attaching the list of blocks
to be freed directly to the transaction structure.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-10-16 20:00:24 -04:00
Theodore Ts'o
8a0aba733d ext4: let the block device know when unused blocks can be discarded
Let the block device know when unused blocks can be discarded, using
the new sb_issue_discard() interface.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-10-16 10:06:27 -04:00
Aneesh Kumar K.V
c894058d66 ext4: Use an rbtree for tracking blocks freed during transaction.
With this patch we track the block freed during a transaction using
red-black tree.  We also make sure contiguous blocks freed are collected
in one node in the tree.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2008-10-16 10:14:27 -04:00
Theodore Ts'o
9f6200bbfc ext4: move /proc setup and teardown out of mballoc.c
...and into the core setup/teardown code in fs/ext4/super.c so that
other parts of ext4 can define tuning parameters.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-09-23 09:18:24 -04:00
Aneesh Kumar K.V
6be2ded1d7 ext4: Don't allow lg prealloc list to be grow large.
Currently, the locality group prealloc list is freed only when there
is a block allocation failure. This can result in large number of
entries in the preallocation list making ext4_mb_use_preallocated()
expensive.

To fix this, we convert the locality group prealloc list to a hash
list. The hash index is the order of number of blocks in the prealloc
space with a max order of 9. When adding prealloc space to the list we
make sure total entries for each order does not exceed 8. If it is
more than 8 we discard few entries and make sure the we have only <= 5
entries.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2008-07-23 14:14:05 -04:00
Mingming Cao
8f6e39a7ad ext4: Move mballoc headers/structures to a seperate header file mballoc.h
Move function and structure definiations out of mballoc.c and put it under
a new header file mballoc.h

Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-04-29 22:01:31 -04:00