Commit Graph

34 Commits

Author SHA1 Message Date
Luck, Tony
de4772c621 edac: sb_edac.c should not require prescence of IMC_DDRIO device
The Sandy Bridge EDAC driver uses a register in the IMC_DDRIO CSR
space to determine the type of DIMMs (registered or unregistered).
But this device does not exist on some single socket Sandy Bridge
servers.  While the type of DIMMs is nice to know, it is not essential
for this driver's other functions. So it seems harsh to have it
refuse to load at all when it cannot find this device.

Make the check for this device be optional. If it isn't present
just report the memory type as "MEM_UNKNOWN".

Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-29 10:32:40 -03:00
Mauro Carvalho Chehab
1339730e73 Linux 3.8-rc7
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.13 (GNU/Linux)
 
 iQEcBAABAgAGBQJRFWw4AAoJEHm+PkMAQRiGnTAH/jBHA2umNc3lc7VkUpusve4q
 GGIlNzYh6iuvIGwKQVj9YPsl37qtQnkDUmY8f8WxZjfxiIDw3TkRKDgNLJaM3Jy5
 E426/FGlRx/Iia5+4tuBeoVYMoIPnndgW5lEAMRK1SvhTByhIYAXsaM0UwPBetb+
 Z5NMdH1f1HVF7RCCmHAkzEk9z78UpdeCzI0t0XuasP2hp2ARAcE1okdO7fNaLiyo
 EmenGhRvy9bAsbRwV0rCdl0rQiZXEYM353DWS7n6q4fyVm8MXFwloUxnWCJTzOIL
 ZLJaz18adFj7Ip/X6ksnMQiQU2Q3B7aThs5ycv0QGxxL2rDFveYRRQ5ICrXOy3M=
 =jjBc
 -----END PGP SIGNATURE-----

Merge tag 'v3.8-rc7' into next

Linux 3.8-rc7

* tag 'v3.8-rc7': (12052 commits)
  Linux 3.8-rc7
  net: sctp: sctp_endpoint_free: zero out secret key data
  net: sctp: sctp_setsockopt_auth_key: use kzfree instead of kfree
  atm/iphase: rename fregt_t -> ffreg_t
  ARM: 7641/1: memory: fix broken mmap by ensuring TASK_UNMAPPED_BASE is aligned
  ARM: DMA mapping: fix bad atomic test
  ARM: realview: ensure that we have sufficient IRQs available
  ARM: GIC: fix GIC cpumask initialization
  net: usb: fix regression from FLAG_NOARP code
  l2tp: dont play with skb->truesize
  net: sctp: sctp_auth_key_put: use kzfree instead of kfree
  netback: correct netbk_tx_err to handle wrap around.
  xen/netback: free already allocated memory on failure in xen_netbk_get_requests
  xen/netback: don't leak pages on failure in xen_netbk_tx_check_gop.
  xen/netback: shutdown the ring if it contains garbage.
  drm/ttm: fix fence locking in ttm_buffer_object_transfer, 2nd try
  virtio_console: Don't access uninitialized data.
  net: qmi_wwan: add more Huawei devices, including E320
  net: cdc_ncm: add another Huawei vendor specific device
  ipv6/ip6_gre: fix error case handling in ip6gre_tunnel_xmit()
  ...
2013-02-20 15:45:52 -03:00
Greg Kroah-Hartman
9b3c6e85c2 Drivers: edac: remove __dev* attributes.
CONFIG_HOTPLUG is going away as an option.  As a result, the __dev*
markings need to be removed.

This change removes the use of __devinit, __devexit_p, and __devexit
from these drivers.

Based on patches originally written by Bill Pemberton, but redone by me
in order to handle some of the coding style issues better, by hand.

Cc: Bill Pemberton <wfp5p@virginia.edu>
Cc: Doug Thompson <dougthompson@xmission.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Mark Gross <mark.gross@intel.com>
Cc: Jason Uhlenkott <juhlenko@akamai.com>
Cc: Mauro Carvalho Chehab <mchehab@redhat.com>
Cc: Tim Small <tim@buttersideup.com>
Cc: Ranganathan Desikan <ravi@jetztechnologies.com>
Cc: "Arvind R." <arvino55@gmail.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: David Daney <david.daney@cavium.com>
Cc: Egor Martovetsky <egor@pasemi.com>
Cc: Olof Johansson <olof@lixom.net>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-03 15:57:03 -08:00
Mauro Carvalho Chehab
da14d93d95 sb_edac: add a missing /n on a debug message
[   17.024963] EDAC DEBUG: get_memory_layout: TOHM: 132.160 GB (0x0000002043ffffff)<7>[   17.024971] EDAC DEBUG: get_memory_layout: SAD#0 DRAM up to 33.792 GB (0x0000000840000000) Interleave: 8:6 reg=0x000083c3

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-12-21 08:01:18 -02:00
Mauro Carvalho Chehab
deb09ddaff sb_edac: Avoid overflow errors at memory size calculation
Sandy bridge EDAC is calculating the memory size with overflow.
Basically, the size field and the integer calculation is using 32 bits.
More bits are needed, when the DIMM memories have high density.

The net result is that memories are improperly reported there, when
high-density DIMMs are used:

EDAC DEBUG: in drivers/edac/sb_edac.c, line at 591: mc#0: channel 0, dimm 0, -16384 Mb (-4194304 pages) bank: 8, rank: 2, row: 0x10000, col: 0x800
EDAC DEBUG: in drivers/edac/sb_edac.c, line at 591: mc#0: channel 1, dimm 0, -16384 Mb (-4194304 pages) bank: 8, rank: 2, row: 0x10000, col: 0x800

As the number of pages value is handled at the EDAC core as unsigned
ints, the driver shows the 16 GB memories at sysfs interface as 16760832
MB! The fix is simple: calculate the number of pages as unsigned 64-bits
integer.

After the patch, the memory size (16 GB) is properly detected:

EDAC DEBUG: in drivers/edac/sb_edac.c, line at 592: mc#0: channel 0, dimm 0, 16384 Mb (4194304 pages) bank: 8, rank: 2, row: 0x10000, col: 0x800
EDAC DEBUG: in drivers/edac/sb_edac.c, line at 592: mc#0: channel 1, dimm 0, 16384 Mb (4194304 pages) bank: 8, rank: 2, row: 0x10000, col: 0x800

Cc: stable@kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-25 07:38:20 -03:00
Mauro Carvalho Chehab
c2078e4c91 Merge branch 'devel'
* devel: (33 commits)
  edac i5000, i5400: fix pointer math in i5000_get_mc_regs()
  edac: allow specifying the error count with fake_inject
  edac: add support for Calxeda highbank L2 cache ecc
  edac: add support for Calxeda highbank memory controller
  edac: create top-level debugfs directory
  sb_edac: properly handle error count
  i7core_edac: properly handle error count
  edac: edac_mc_handle_error(): add an error_count parameter
  edac: remove arch-specific parameter for the error handler
  amd64_edac: Don't pass driver name as an error parameter
  edac_mc: check for allocation failure in edac_mc_alloc()
  edac: Increase version to 3.0.0
  edac_mc: Cleanup per-dimm_info debug messages
  edac: Convert debugfX to edac_dbg(X,
  edac: Use more normal debugging macro style
  edac: Don't add __func__ or __FILE__ for debugf[0-9] msgs
  Edac: Add ABI Documentation for the new device nodes
  edac: move documentation ABI to ABI/testing/sysfs-devices-edac
  i7core_edac: change the mem allocation scheme to make Documentation/kobject.txt happy
  edac: change the mem allocation scheme to make Documentation/kobject.txt happy
  ...
2012-07-29 21:11:05 -03:00
Mauro Carvalho Chehab
c10538396b sb_edac: properly handle error count
Instead of reporting the error count via driver-specific details,
use the new way provided by edac_mc_handle_error.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-06-12 12:15:49 -03:00
Mauro Carvalho Chehab
9eb07a7fb8 edac: edac_mc_handle_error(): add an error_count parameter
In order to avoid loosing error events, it is desirable to group
error events together and generate a single trace for several identical
errors.

The trace API already allows reporting multiple errors. Change the
handle_error function to also allow that.

The changes at the drivers were made by this small script:

	$file .=$_ while (<>);
	$file =~ s/(edac_mc_handle_error)\s*\(([^\,]+)\,([^\,]+)\,/$1($2,$3, 1,/g;
	print $file;

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-06-12 12:15:47 -03:00
Mauro Carvalho Chehab
03f7eae80f edac: remove arch-specific parameter for the error handler
Remove the arch-dependent parameter, as it were not used,
as the MCE tracepoint weren't implemented. It probably doesn't
make sense to have an MCE-specific tracepoint, as this will
cost more bytes at the tracepoint, and tracepoint is not free.

The changes at the EDAC drivers were done by this small perl script:

	$file .=$_ while (<>);
	$file =~ s/(edac_mc_handle_error)\s*\(([^\;]+)\,([^\,\)]+)\s*\)/$1($2)/g;
	print $file;

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-06-11 13:23:52 -03:00
Joe Perches
956b9ba156 edac: Convert debugfX to edac_dbg(X,
Use a more common debugging style.

Remove __FILE__ uses, add missing newlines,
coalesce formats and align arguments.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-06-11 13:23:49 -03:00
Mauro Carvalho Chehab
dd23cd6eb1 edac: Don't add __func__ or __FILE__ for debugf[0-9] msgs
The debug macro already adds that. Most of the work here was
made by this small script:

$f .=$_ while (<>);

$f =~ s/(debugf[0-9]\s*\(\s*)__FILE__\s*": /\1"/g;
$f =~ s/(debugf[0-9]\s*\(\s*)__FILE__\s*/\1/g;
$f =~ s/(debugf[0-9]\s*\(\s*)__FILE__\s*"MC: /\1"/g;

$f =~ s/(debugf[0-9]\s*\(\")\%s[\:\,\(\)]*\s*([^\"]*\s*[^\)]+)__func__\s*\,\s*/\1\2/g;
$f =~ s/(debugf[0-9]\s*\(\")\%s[\:\,\(\)]*\s*([^\"]*\s*[^\)]+),\s*__func__\s*\)/\1\2)/g;
$f =~ s/(debugf[0-9]\s*\(\"MC\:\s*)\%s[\:\,\(\)]*\s*([^\"]*\s*[^\)]+)__func__\s*\,\s*/\1\2/g;
$f =~ s/(debugf[0-9]\s*\(\"MC\:\s*)\%s[\:\,\(\)]*\s*([^\"]*\s*[^\)]+),\s*__func__\s*\)/\1\2)/g;

$f =~ s/\"MC\: \\n\"/"MC:\\n"/g;

print $f;

After running the script, manual cleanups were done to fix it the remaining
places.

While here, removed the __LINE__ on most places, as it doesn't actually give
useful info on most places.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-06-11 13:23:47 -03:00
Mauro Carvalho Chehab
fd687502dc edac: Rename the parent dev to pdev
As EDAC doesn't use struct device itself, it created a parent dev
pointer called as "pdev".  Now that we'll be converting it to use
struct device, instead of struct devsys, this needs to be fixed.

No functional changes.

Reviewed-by: Aristeu Rozanski <arozansk@redhat.com>
Acked-by: Chris Metcalf <cmetcalf@tilera.com>
Cc: Doug Thompson <norsk5@yahoo.com>
Cc: Borislav Petkov <borislav.petkov@amd.com>
Cc: Mark Gross <mark.gross@intel.com>
Cc: Jason Uhlenkott <juhlenko@akamai.com>
Cc: Tim Small <tim@buttersideup.com>
Cc: Ranganathan Desikan <ravi@jetztechnologies.com>
Cc: "Arvind R." <arvino55@gmail.com>
Cc: Olof Johansson <olof@lixom.net>
Cc: Egor Martovetsky <egor@pasemi.com>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Joe Perches <joe@perches.com>
Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Hitoshi Mitake <h.mitake@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: "Niklas Söderlund" <niklas.soderlund@ericsson.com>
Cc: Shaohui Xie <Shaohui.Xie@freescale.com>
Cc: Josh Boyer <jwboyer@gmail.com>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-06-11 11:56:06 -03:00
Chen Gong
2cbb587d3b edac: fix the error about memory type detection on SandyBridge
On SandyBridge, DDRIOA(Dev: 17 Func: 0 Offset: 328) is used
to detect whether DIMM is RDIMM/LRDIMM, not TA(Dev: 15 Func: 0).

Signed-off-by: Chen Gong <gong.chen@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-06-11 11:49:51 -03:00
Chen Gong
e35fca4791 edac: avoid mce decoding crash after edac driver unloaded
Some edac drivers register themselves as mce decoders via
notifier_chain. But in current notifier_chain implementation logic,
it doesn't accept same notifier registered twice. If so, it will be
wrong when adding/removing the element from the list. For example,
on one SandyBridge platform, remove module sb_edac and then trigger
one error, it will hit oops because it has no mce decoder registered
but related notifier_chain still points to an invalid callback
function. Here is an example:

Call Trace:
 [<ffffffff8150ef6a>] atomic_notifier_call_chain+0x1a/0x20
 [<ffffffff8102b936>] mce_log+0x46/0x180
 [<ffffffff8102eaea>] apei_mce_report_mem_error+0x4a/0x60
 [<ffffffff812e19d2>] ghes_do_proc+0x192/0x210
 [<ffffffff812e2066>] ghes_proc+0x46/0x70
 [<ffffffff812e20d8>] ghes_notify_sci+0x48/0x80
 [<ffffffff8150ef05>] notifier_call_chain+0x55/0x80
 [<ffffffff81076f1a>] __blocking_notifier_call_chain+0x5a/0x80
 [<ffffffff812aea11>] ? acpi_os_wait_events_complete+0x23/0x23
 [<ffffffff81076f56>] blocking_notifier_call_chain+0x16/0x20
 [<ffffffff812ddc4d>] acpi_hed_notify+0x19/0x1b
 [<ffffffff812b16bd>] acpi_device_notify+0x19/0x1b
 [<ffffffff812beb38>] acpi_ev_notify_dispatch+0x67/0x7f
 [<ffffffff812aea3a>] acpi_os_execute_deferred+0x29/0x36
 [<ffffffff81069dc2>] process_one_work+0x132/0x450
 [<ffffffff8106bbcb>] worker_thread+0x17b/0x3c0
 [<ffffffff8106ba50>] ? manage_workers+0x120/0x120
 [<ffffffff81070aee>] kthread+0x9e/0xb0
 [<ffffffff81514724>] kernel_thread_helper+0x4/0x10
 [<ffffffff81070a50>] ? kthread_freezable_should_stop+0x70/0x70
 [<ffffffff81514720>] ? gs_change+0x13/0x13
Code: f3 49 89 d4 45 85 ed 4d 89 c6 48 8b 0f 74 48 48 85 c9 75 17 eb 41
0f 1f 80 00 00 00 00 41 83 ed 01 4c 89 f9 74 22 4d 85 ff 74 1d <4c> 8b
79 08 4c 89 e2 48 89 de 48 89 cf ff 11 4d 85 f6 74 04 41
RIP  [<ffffffff8150eef6>] notifier_call_chain+0x46/0x80
 RSP <ffff88042868fb20>
CR2: ffffffffa01af838
---[ end trace 0100930068e73e6f ]---
BUG: unable to handle kernel paging request at fffffffffffffff8
IP: [<ffffffff810705b0>] kthread_data+0x10/0x20
PGD 1a0d067 PUD 1a0e067 PMD 0
Oops: 0000 [#2] SMP

Only i7core_edac and sb_edac have such issues because they have more
than one memory controller which means they have to register mce
decoder many times.

Cc: <stable@vger.kernel.org> # 3.2 and upper
Signed-off-by: Chen Gong <gong.chen@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-06-11 11:49:51 -03:00
Linus Torvalds
87a5af24e5 Merge git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-edac
Pull EDAC internal API changes from Mauro Carvalho Chehab:
 "This changeset is the first part of a series of patches that fixes the
  EDAC sybsystem.  On this set, it changes the Kernel EDAC API in order
  to properly represent the Intel i3/i5/i7, Xeon 3xxx/5xxx/7xxx, and
  Intel E5-xxxx memory controllers.

  The EDAC core used to assume that:

       - the DRAM chip select pin is directly accessed by the memory
         controller

       - when multiple channels are used, they're all filled with the
         same type of memory.

  None of the above premises is true on Intel memory controllers since
  2002, when RAMBUS and FB-DIMMs were introduced, and Advanced Memory
  Buffer or by some similar technologies hides the direct access to the
  DRAM pins.

  So, the existing drivers for those chipsets had to lie to the EDAC
  core, in general telling that just one channel is filled.  That
  produces some hard to understand error messages like:

       EDAC MC0: CE row 3, channel 0, label "DIMM1": 1 Unknown error(s): memory read error on FATAL area : cpu=0 Err=0008:00c2 (ch=2), addr = 0xad1f73480 => socket=0, Channel=0(mask=2), rank=1

  The location information there (row3 channel 0) is completely bogus:
  it has no physical meaning, and are just some random values that the
  driver uses to talk with the EDAC core.  The error actually happened
  at CPU socket 0, channel 0, slot 1, but this is not reported anywhere,
  as the EDAC core doesn't know anything about the memory layout.  So,
  only advanced users that know how the EDAC driver works and that tests
  their systems to see how DIMMs are mapped can actually benefit for
  such error logs.

  This patch series fixes the error report logic, in order to allow the
  EDAC to expose the memory architecture used by them to the EDAC core.
  So, as the EDAC core now understands how the memory is organized, it
  can provide an useful report:

       EDAC MC0: CE memory read error on DIMM1 (channel:0 slot:1 page:0x364b1b offset:0x600 grain:32 syndrome:0x0 - count:1 area:DRAM err_code:0001:0090 socket:0 channel_mask:1 rank:4)

  The location of the DIMM where the error happened is reported by "MC0"
  (cpu socket #0), at "channel:0 slot:1" location, and matches the
  physical location of the DIMM.

  There are two remaining issues not covered by this patch series:

       - The EDAC sysfs API will still report bogus values.  So,
         userspace tools like edac-utils will still use the bogus data;

       - Add a new tracepoint-based way to get the binary information
         about the errors.

  Those are on a second series of patches (also at -next), but will
  probably miss the train for 3.5, due to the slow review process."

Fix up trivial conflict (due to spelling correction of removed code) in
drivers/edac/edac_device.c

* git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-edac: (42 commits)
  i7core: fix ranks information at the per-channel struct
  i5000: Fix the fatal error handling
  i5100_edac: Fix a warning when compiled with 32 bits
  i82975x_edac: Test nr_pages earlier to save a few CPU cycles
  e752x_edac: provide more info about how DIMMS/ranks are mapped
  i5000_edac: Fix the logic that retrieves memory information
  i5400_edac: improve debug messages to better represent the filled memory
  edac: Cleanup the logs for i7core and sb edac drivers
  edac: Initialize the dimm label with the known information
  edac: Remove the legacy EDAC ABI
  x38_edac: convert driver to use the new edac ABI
  tile_edac: convert driver to use the new edac ABI
  sb_edac: convert driver to use the new edac ABI
  r82600_edac: convert driver to use the new edac ABI
  ppc4xx_edac: convert driver to use the new edac ABI
  pasemi_edac: convert driver to use the new edac ABI
  mv64x60_edac: convert driver to use the new edac ABI
  mpc85xx_edac: convert driver to use the new edac ABI
  i82975x_edac: convert driver to use the new edac ABI
  i82875p_edac: convert driver to use the new edac ABI
  ...
2012-05-29 18:32:37 -07:00
Mauro Carvalho Chehab
e17a2f42a4 edac: Cleanup the logs for i7core and sb edac drivers
Remove some information that it is duplicated at the MCE log,
and don't have much usage for the error. Those data will be
added again, when creating a trace function that outputs both
memory errors and MCE fields.

Cc: Aristeu Rozanski <arozansk@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-28 19:13:51 -03:00
Mauro Carvalho Chehab
ca0907b9e4 edac: Remove the legacy EDAC ABI
Now that all drivers got converted to use the new ABI, we can
drop the old one.

Acked-by: Chris Metcalf <cmetcalf@tilera.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-28 19:13:50 -03:00
Mauro Carvalho Chehab
c36e3e7768 sb_edac: convert driver to use the new edac ABI
The legacy edac ABI is going to be removed. Port the driver to use
and benefit from the new API functionality.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-28 19:13:48 -03:00
Mauro Carvalho Chehab
a895bf8b1e edac: move nr_pages to dimm struct
The number of pages is a dimm property. Move it to the dimm struct.

After this change, it is possible to add sysfs nodes for the DIMM's that
will properly represent the DIMM stick properties, including its size.

A TODO fix here is to properly represent dual-rank/quad-rank DIMMs when
the memory controller represents the memory via chip select rows.

Reviewed-by: Aristeu Rozanski <arozansk@redhat.com>
Acked-by: Borislav Petkov <borislav.petkov@amd.com>
Acked-by: Chris Metcalf <cmetcalf@tilera.com>
Cc: Doug Thompson <norsk5@yahoo.com>
Cc: Mark Gross <mark.gross@intel.com>
Cc: Jason Uhlenkott <juhlenko@akamai.com>
Cc: Tim Small <tim@buttersideup.com>
Cc: Ranganathan Desikan <ravi@jetztechnologies.com>
Cc: "Arvind R." <arvino55@gmail.com>
Cc: Olof Johansson <olof@lixom.net>
Cc: Egor Martovetsky <egor@pasemi.com>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Joe Perches <joe@perches.com>
Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Hitoshi Mitake <h.mitake@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: "Niklas Söderlund" <niklas.soderlund@ericsson.com>
Cc: Shaohui Xie <Shaohui.Xie@freescale.com>
Cc: Josh Boyer <jwboyer@gmail.com>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-28 19:10:58 -03:00
Mauro Carvalho Chehab
5e2af0c09e edac: Don't initialize csrow's first_page & friends when not needed
Almost all edac	drivers	initialize csrow_info->first_page,
csrow_info->last_page and csrow_info->page_mask. Those vars are
used inside the EDAC core, in order to calculate the csrow affected
by an error, by using the routine edac_mc_find_csrow_by_page().

However, very few drivers actually use it:
        e752x_edac.c
        e7xxx_edac.c
        i3000_edac.c
        i82443bxgx_edac.c
        i82860_edac.c
        i82875p_edac.c
        i82975x_edac.c
        r82600_edac.c

There also a few other drivers that have their own calculus
formula internally using those vars.

All the others are just wasting time by initializing those
data.

While initializing data without using them won't cause any troubles, as
those information is stored at the wrong place (at csrows structure), it
is better to remove what is unused, in order to simplify the next patch.

Reviewed-by: Aristeu Rozanski <arozansk@redhat.com>
Acked-by: Borislav Petkov <borislav.petkov@amd.com>
Acked-by: Chris Metcalf <cmetcalf@tilera.com>
Cc: Doug Thompson <norsk5@yahoo.com>
Cc: Hitoshi Mitake <h.mitake@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: "Niklas Söderlund" <niklas.soderlund@ericsson.com>
Cc: Josh Boyer <jwboyer@gmail.com>
Cc: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-28 19:10:58 -03:00
Mauro Carvalho Chehab
084a4fccef edac: move dimm properties to struct dimm_info
On systems based on chip select rows, all channels need to use memories
with the same properties, otherwise the memories on channels A and B
won't be recognized.

However, such assumption is not true for all types of memory
controllers.

Controllers for FB-DIMM's don't have such requirements.

Also, modern Intel controllers seem to be capable of handling such
differences.

So, we need to get rid of storing the DIMM information into a per-csrow
data, storing it, instead at the right place.

The first step is to move grain, mtype, dtype and edac_mode to the
per-dimm struct.

Reviewed-by: Aristeu Rozanski <arozansk@redhat.com>
Reviewed-by: Borislav Petkov <borislav.petkov@amd.com>
Acked-by: Chris Metcalf <cmetcalf@tilera.com>
Cc: Doug Thompson <norsk5@yahoo.com>
Cc: Borislav Petkov <borislav.petkov@amd.com>
Cc: Mark Gross <mark.gross@intel.com>
Cc: Jason Uhlenkott <juhlenko@akamai.com>
Cc: Tim Small <tim@buttersideup.com>
Cc: Ranganathan Desikan <ravi@jetztechnologies.com>
Cc: "Arvind R." <arvino55@gmail.com>
Cc: Olof Johansson <olof@lixom.net>
Cc: Egor Martovetsky <egor@pasemi.com>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Joe Perches <joe@perches.com>
Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Hitoshi Mitake <h.mitake@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: James Bottomley <James.Bottomley@parallels.com>
Cc: "Niklas Söderlund" <niklas.soderlund@ericsson.com>
Cc: Shaohui Xie <Shaohui.Xie@freescale.com>
Cc: Josh Boyer <jwboyer@gmail.com>
Cc: Mike Williams <mike@mikebwilliams.com>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-28 19:10:58 -03:00
Mauro Carvalho Chehab
a7d7d2e1a0 edac: Create a dimm struct and move the labels into it
The way a DIMM is currently represented implies that they're
linked into a per-csrow struct. However, some drivers don't see
csrows, as they're ridden behind some chip like the AMB's
on FBDIMM's, for example.

This forced drivers to fake^Wvirtualize a csrow struct, and to create
a mess under csrow/channel original's concept.

Move the DIMM labels into a per-DIMM struct, and add there
the real location of the socket, in terms of csrow/channel.
Latter patches will modify the location to properly represent the
memory architecture.

All other drivers will use a per-csrow type of location.
Some of those drivers will require a latter conversion, as
they also fake the csrows internally.

TODO: While this patch doesn't change the existing behavior, on
csrows-based memory controllers, a csrow/channel pair points to a memory
rank. There's a known bug at the EDAC core that allows having different
labels for the same DIMM, if it has more than one rank. A latter patch
is need to merge the several ranks for a DIMM into the same dimm_info
struct, in order to avoid having different labels for the same DIMM.

The edac_mc_alloc() will now contain a per-dimm initialization loop that
will be changed by latter patches in order to match other types of
memory architectures.

Reviewed-by: Aristeu Rozanski <arozansk@redhat.com>
Reviewed-by: Borislav Petkov <borislav.petkov@amd.com>
Cc: Doug Thompson <norsk5@yahoo.com>
Cc: Ranganathan Desikan <ravi@jetztechnologies.com>
Cc: "Arvind R." <arvino55@gmail.com>
Cc: "Niklas Söderlund" <niklas.soderlund@ericsson.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-28 19:10:57 -03:00
David Mackey
15ed103a98 edac: Fix spelling errors.
Signed-off-by: David Mackey <tdmackey@twitter.com>
Signed-off-by: Vinson Lee <vlee@twitter.com>
Acked-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-04-30 13:28:41 +02:00
Linus Torvalds
f0f3680e50 Merge branch 'linux_next' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-edac
Pull EDAC fixes from Mauro Carvalho Chehab:
 "A series of EDAC driver fixes.  It also has one core fix at the
  documentation, and a rename patch, fixing the name of the struct that
  contains the rank information."

* 'linux_next' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-edac:
  edac: rename channel_info to rank_info
  i5400_edac: Avoid calling pci_put_device() twice
  edac: i5100 ack error detection register after each read
  edac: i5100 fix erroneous define for M1Err
  edac: sb_edac: Fix a wrong value setting for the previous value
  edac: sb_edac: Fix a INTERLEAVE_MODE() misuse
  edac: sb_edac: Let the driver depend on PCI_MMCONFIG
  edac: Improve the comments to better describe the memory concepts
  edac/ppc4xx_edac: Fix compilation
  Fix sb_edac compilation with 32 bits kernels
2012-03-28 14:24:40 -07:00
Hui Wang
7fae0db439 edac: sb_edac: Fix a wrong value setting for the previous value
>From the driver design, the variable limit wants to compare with its
previous value, we should set the value of limit instead of the value
of tmp_mb to the variable prev.

Signed-off-by: Hui Wang <jason77.wang@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-03-21 15:20:11 -03:00
Hui Wang
ad9c40b7dd edac: sb_edac: Fix a INTERLEAVE_MODE() misuse
We can identify dram interleave mode from the Dram Rule register
rather than Dram Interleave list register.

In this context, the reg of INTERLEAVE_MODE(reg) contains the Dram
Interleave list register, we can't get interleave mode from the reg,
while the variable interleave_mode saves the the mode got from the
Dram Rule register, so we use the variable to replace
INTERLEAVE_MDDE(reg) here.

Signed-off-by: Hui Wang <jason77.wang@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-03-21 15:20:02 -03:00
Mauro Carvalho Chehab
5b889e379f Fix sb_edac compilation with 32 bits kernels
As reported by Josh Boyer <jwboyer@redhat.com>:
>	drivers/edac/sb_edac.c: In function 'get_memory_error_data':
> 	drivers/edac/sb_edac.c:861:2: warning: left shift count >= width of type
> 	[enabled by default]
> 	<snip>
> 	ERROR: "__udivdi3" [drivers/edac/sb_edac.ko] undefined!
> 	make[1]: *** [__modpost] Error 1
> 	make: *** [modules] Error 2

PS.: compile-tested only

Reported-by: Josh Boyer <jwboyer@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-03-21 15:19:38 -03:00
Lionel Debroux
36c46f31df EDAC: Make pci_device_id tables __devinitconst.
These const tables are currently marked __devinitdata, but
Documentation/PCI/pci.txt says:

"o The ID table array should be marked __devinitconst; this is done
automatically if the table is declared with DEFINE_PCI_DEVICE_TABLE()."

So use DEFINE_PCI_DEVICE_TABLE(x).

Based on PaX and earlier work by Andi Kleen.

Signed-off-by: Lionel Debroux <lionel_debroux@yahoo.fr>
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2012-03-19 12:04:54 +01:00
Linus Torvalds
edf7c8148e Merge branch 'x86-mce-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
* 'x86-mce-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86: add IRQ context simulation in module mce-inject
  x86, mce, therm_throt: Don't report power limit and package level thermal throttle events in mcelog
  x86, MCE: Drain mcelog buffer
  x86, mce: Add wrappers for registering on the decode chain
2012-01-06 15:02:37 -08:00
Kevin Winchester
141168c36c x86: Simplify code by removing a !SMP #ifdefs from 'struct cpuinfo_x86'
Several fields in struct cpuinfo_x86 were not defined for the
!SMP case, likely to save space.  However, those fields still
have some meaning for UP, and keeping them allows some #ifdef
removal from other files.  The additional size of the UP kernel
from this change is not significant enough to worry about
keeping up the distinction:

	   text    data     bss     dec     hex filename
	4737168	 506459	 972040	6215667	 5ed7f3	vmlinux.o.before
	4737444	 506459	 972040	6215943	 5ed907	vmlinux.o.after

for a difference of 276 bytes for an example UP config.

If someone wants those 276 bytes back badly then it should
be implemented in a cleaner way.

Signed-off-by: Kevin Winchester <kjwinchester@gmail.com>
Cc: Steffen Persvold <sp@numascale.com>
Link: http://lkml.kernel.org/r/1324428742-12498-1-git-send-email-kjwinchester@gmail.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-12-21 09:25:09 +01:00
Borislav Petkov
3653ada5d3 x86, mce: Add wrappers for registering on the decode chain
No functionality change, this is done so that in a follow-on patch all
queued-up MCEs can be decoded after registering on the chain.

Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2011-12-14 12:50:12 +01:00
Mark A. Grondona
c6e13b528f EDAC: Fix incorrect edac mode reporting in sb_edac
The edac driver for Sandy Bridge was found to be reporting "FPM"
for edac_mode, which clearly doesn't make sense. It was found that
sb_edac.c:get_dimm_config was reusing a variable for both mem_type
and edac_type, and thus was overwriting the value after setting
it correctly. This patch fixes that issue.

Before the patch:
/sys/devices/system/edac/mc/mc0/csrow0/edac_mode:FPM
/sys/devices/system/edac/mc/mc0/csrow1/edac_mode:FPM
/sys/devices/system/edac/mc/mc0/csrow2/edac_mode:FPM
/sys/devices/system/edac/mc/mc0/csrow3/edac_mode:FPM

After:
/sys/devices/system/edac/mc/mc0/csrow0/edac_mode:S4ECD4ED
/sys/devices/system/edac/mc/mc0/csrow1/edac_mode:S4ECD4ED
/sys/devices/system/edac/mc/mc0/csrow2/edac_mode:S4ECD4ED
/sys/devices/system/edac/mc/mc0/csrow3/edac_mode:S4ECD4ED

Signed-off-by: Mark A. Grondona <mgrondona@llnl.gov>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-11-01 10:01:55 -02:00
Mauro Carvalho Chehab
3d78c9af78 edac: sb_edac: Add it to the building system
Some changes on it were required due to changeset cd90cc84c6bf0, that
changed the glue with the MCE logic.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-11-01 10:01:54 -02:00
Mauro Carvalho Chehab
eebf11a016 edac: Add an experimental new driver to support Sandy Bridge CPU's
This driver is known to work on mine and Tony's test environments,
using software error injection, and a partial hardware/software
error injection tool.

There's no broader range test yet to double check if the error decoding
logic will actually point to the right DIMM, so use it with care.
More tests are required to be sure that the driver will work on all
different types of memory configurations.

If you're willing to risk using it, I suggest you to enable EDAC debugs
for your test machines, as the debug logs helps to track what's going
inside the driver.

Please feed me with bug reports, if you notice that the driver
is miss-behaving.

Tested-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-11-01 10:01:53 -02:00