Commit Graph

23 Commits

Author SHA1 Message Date
Linus Torvalds
ee89f81252 Merge branch 'for-3.9/core' of git://git.kernel.dk/linux-block
Pull block IO core bits from Jens Axboe:
 "Below are the core block IO bits for 3.9.  It was delayed a few days
  since my workstation kept crashing every 2-8h after pulling it into
  current -git, but turns out it is a bug in the new pstate code (divide
  by zero, will report separately).  In any case, it contains:

   - The big cfq/blkcg update from Tejun and and Vivek.

   - Additional block and writeback tracepoints from Tejun.

   - Improvement of the should sort (based on queues) logic in the plug
     flushing.

   - _io() variants of the wait_for_completion() interface, using
     io_schedule() instead of schedule() to contribute to io wait
     properly.

   - Various little fixes.

  You'll get two trivial merge conflicts, which should be easy enough to
  fix up"

Fix up the trivial conflicts due to hlist traversal cleanups (commit
b67bfe0d42: "hlist: drop the node parameter from iterators").

* 'for-3.9/core' of git://git.kernel.dk/linux-block: (39 commits)
  block: remove redundant check to bd_openers()
  block: use i_size_write() in bd_set_size()
  cfq: fix lock imbalance with failed allocations
  drivers/block/swim3.c: fix null pointer dereference
  block: don't select PERCPU_RWSEM
  block: account iowait time when waiting for completion of IO request
  sched: add wait_for_completion_io[_timeout]
  writeback: add more tracepoints
  block: add block_{touch|dirty}_buffer tracepoint
  buffer: make touch_buffer() an exported function
  block: add @req to bio_{front|back}_merge tracepoints
  block: add missing block_bio_complete() tracepoint
  block: Remove should_sort judgement when flush blk_plug
  block,elevator: use new hashtable implementation
  cfq-iosched: add hierarchical cfq_group statistics
  cfq-iosched: collect stats from dead cfqgs
  cfq-iosched: separate out cfqg_stats_reset() from cfq_pd_reset_stats()
  blkcg: make blkcg_print_blkgs() grab q locks instead of blkcg lock
  block: RCU free request_queue
  blkcg: implement blkg_[rw]stat_recursive_sum() and blkg_[rw]stat_merge()
  ...
2013-02-28 12:52:24 -08:00
Vladimir Davydov
5577022f4e block: account iowait time when waiting for completion of IO request
Using wait_for_completion() for waiting for a IO request to be executed
results in wrong iowait time accounting. For example, a system having
the only task doing write() and fdatasync() on a block device can be
reported being idle instead of iowaiting as it should because
blkdev_issue_flush() calls wait_for_completion() which in turn calls
schedule() that does not increment the iowait proc counter and thus does
not turn on iowait time accounting.

The patch makes block layer use wait_for_completion_io() instead of
wait_for_completion() where appropriate to account iowait time
correctly.

Signed-off-by: Vladimir Davydov <vdavydov@parallels.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-02-15 16:45:07 +01:00
Clark Williams
cf4aebc292 sched: Move sched.h sysctl bits into separate header
Move the sysctl-related bits from include/linux/sched.h into
a new file: include/linux/sched/sysctl.h. Then update source
files requiring access to those bits by including the new
header file.

Signed-off-by: Clark Williams <williams@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/20130207094659.06dced96@riff.lan
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-02-07 20:50:54 +01:00
Linus Torvalds
60da5bf47d Merge branch 'for-3.8/core' of git://git.kernel.dk/linux-block
Pull block layer core updates from Jens Axboe:
 "Here are the core block IO bits for 3.8.  The branch contains:

   - The final version of the surprise device removal fixups from Bart.

   - Don't hide EFI partitions under advanced partition types.  It's
     fairly wide spread these days.  This is especially dangerous for
     systems that have both msdos and efi partition tables, where you
     want to keep them in sync.

   - Cleanup of using -1 instead of the proper NUMA_NO_NODE

   - Export control of bdi flusher thread CPU mask and default to using
     the home node (if known) from Jeff.

   - Export unplug tracepoint for MD.

   - Core improvements from Shaohua.  Reinstate the recursive merge, as
     the original bug has been fixed.  Add plugging for discard and also
     fix a problem handling non pow-of-2 discard limits.

  There's a trivial merge in block/blk-exec.c due to a fix that went
  into 3.7-rc at a later point than -rc4 where this is based."

* 'for-3.8/core' of git://git.kernel.dk/linux-block:
  block: export block_unplug tracepoint
  block: add plug for blkdev_issue_discard
  block: discard granularity might not be power of 2
  deadline: Allow 0ms deadline latency, increase the read speed
  partitions: enable EFI/GPT support by default
  bsg: Remove unused function bsg_goose_queue()
  block: Make blk_cleanup_queue() wait until request_fn finished
  block: Avoid scheduling delayed work on a dead queue
  block: Avoid that request_fn is invoked on a dead queue
  block: Let blk_drain_queue() caller obtain the queue lock
  block: Rename queue dead flag
  bdi: add a user-tunable cpu_list for the bdi flusher threads
  block: use NUMA_NO_NODE instead of -1
  block: recursive merge requests
  block CFQ: avoid moving request to different queue
2012-12-17 08:27:23 -08:00
Bart Van Assche
c246e80d86 block: Avoid that request_fn is invoked on a dead queue
A block driver may start cleaning up resources needed by its
request_fn as soon as blk_cleanup_queue() finished, so request_fn
must not be invoked after draining finished. This is important
when blk_run_queue() is invoked without any requests in progress.
As an example, if blk_drain_queue() and scsi_run_queue() run in
parallel, blk_drain_queue() may have finished all requests after
scsi_run_queue() has taken a SCSI device off the starved list but
before that last function has had a chance to run the queue.

Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Cc: James Bottomley <JBottomley@Parallels.com>
Cc: Mike Christie <michaelc@cs.wisc.edu>
Cc: Chanho Min <chanho.min@lge.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-12-06 14:32:01 +01:00
Bart Van Assche
3f3299d5c0 block: Rename queue dead flag
QUEUE_FLAG_DEAD is used to indicate that queuing new requests must
stop. After this flag has been set queue draining starts. However,
during the queue draining phase it is still safe to invoke the
queue's request_fn, so QUEUE_FLAG_DYING is a better name for this
flag.

This patch has been generated by running the following command
over the kernel source tree:

git grep -lEw 'blk_queue_dead|QUEUE_FLAG_DEAD' |
    xargs sed -i.tmp -e 's/blk_queue_dead/blk_queue_dying/g'      \
        -e 's/QUEUE_FLAG_DEAD/QUEUE_FLAG_DYING/g';                \
sed -i.tmp -e "s/QUEUE_FLAG_DYING$(printf \\t)*5/QUEUE_FLAG_DYING$(printf \\t)5/g" \
    include/linux/blkdev.h;                                       \
sed -i.tmp -e 's/ DEAD/ DYING/g' -e 's/dead queue/a dying queue/' \
    -e 's/Dead queue/A dying queue/' block/blk-core.c

Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: James Bottomley <JBottomley@Parallels.com>
Cc: Mike Christie <michaelc@cs.wisc.edu>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Chanho Min <chanho.min@lge.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-12-06 14:30:58 +01:00
Roland Dreier
893d290f1d block: Don't access request after it might be freed
After we've done __elv_add_request() and __blk_run_queue() in
blk_execute_rq_nowait(), the request might finish and be freed
immediately.  Therefore checking if the type is REQ_TYPE_PM_RESUME
isn't safe afterwards, because if it isn't, rq might be gone.
Instead, check beforehand and stash the result in a temporary.

This fixes crashes in blk_execute_rq_nowait() I get occasionally when
running with lots of memory debugging options enabled -- I think this
race is usually harmless because the window for rq to be reallocated
is so small.

Signed-off-by: Roland Dreier <roland@purestorage.com>
Cc: stable@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-11-23 14:32:55 +01:00
Muthukumar Ratty
e81ca6fe85 [SCSI] block: Fix blk_execute_rq_nowait() dead queue handling
If the queue is dead blk_execute_rq_nowait() doesn't invoke the done()
callback function. That will result in blk_execute_rq() being stuck
in wait_for_completion(). Avoid this by initializing rq->end_io to the
done() callback before we check the queue state. Also, make sure the
queue lock is held around the invocation of the done() callback. Found
this through source code review.

Signed-off-by: Muthukumar Ratty <muthur@gmail.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Tejun Heo <tj@kernel.org>
Acked-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-07-20 08:58:39 +01:00
Tejun Heo
8ba61435d7 block: add missing blk_queue_dead() checks
blk_insert_cloned_request(), blk_execute_rq_nowait() and
blk_flush_plug_list() either didn't check whether the queue was dead
or did it without holding queue_lock.  Update them so that dead state
is checked while holding queue_lock.

AFAICS, this plugs all holes (requeue doesn't matter as the request is
transitioning atomically from in_flight to queued).

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-12-14 00:33:37 +01:00
Tejun Heo
34f6055c80 block: add blk_queue_dead()
There are a number of QUEUE_FLAG_DEAD tests.  Add blk_queue_dead()
macro and use it.

This patch doesn't introduce any functional difference.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-12-14 00:33:37 +01:00
James Bottomley
bfe159a512 [SCSI] fix crash in scsi_dispatch_cmd()
USB surprise removal of sr is triggering an oops in
scsi_dispatch_command().  What seems to be happening is that USB is
hanging on to a queue reference until the last close of the upper
device, so the crash is caused by surprise remove of a mounted CD
followed by attempted unmount.

The problem is that USB doesn't issue its final commands as part of
the SCSI teardown path, but on last close when the block queue is long
gone.  The long term fix is probably to make sr do the teardown in the
same way as sd (so remove all the lower bits on ejection, but keep the
upper disk alive until last close of user space).  However, the
current oops can be simply fixed by not allowing any commands to be
sent to a dead queue.

Cc: stable@kernel.org
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-07-21 14:21:18 -07:00
Tao Ma
addd0a09fc block: Remove 'plug/unplug' comment in blk_execute_rq_nowait
unplug is replaced with blk_run_queue now in blk_execute_rq_nowait,
so change the comment accordingly.

Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-05-05 15:10:05 -06:00
Christoph Hellwig
24ecfbe27f block: add blk_run_queue_async
Instead of overloading __blk_run_queue to force an offload to kblockd
add a new blk_run_queue_async helper to do it explicitly.  I've kept
the blk_queue_stopped check for now, but I suspect it's not needed
as the check we do when the workqueue items runs should be enough.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-04-18 11:41:33 +02:00
Jens Axboe
4c63f5646e Merge branch 'for-2.6.39/stack-plug' into for-2.6.39/core
Conflicts:
	block/blk-core.c
	block/blk-flush.c
	drivers/md/raid1.c
	drivers/md/raid10.c
	drivers/md/raid5.c
	fs/nilfs2/btnode.c
	fs/nilfs2/mdt.c

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-03-10 08:58:35 +01:00
Jens Axboe
7eaceaccab block: remove per-queue plugging
Code has been converted over to the new explicit on-stack plugging,
and delay users have been converted to use the new API for that.
So lets kill off the old plugging along with aops->sync_page().

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-03-10 08:52:07 +01:00
Mark Lord
4b1977698c block: Prevent hang_check firing during long I/O
During long I/O operations, the hang_check timer may fire,
trigger stack dumps that unnecessarily alarm the user.

Eg.  hdparm --security-erase NULL /dev/sdb  ## can take *hours* to complete

So, if hang_check is armed, we should wake up periodically
to prevent it from triggering.  This patch uses a wake-up interval
equal to half the hang_check timer period, which keeps overhead low enough.

Signed-off-by: Mark Lord <mlord@pobox.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-09-24 15:52:09 +02:00
Christoph Hellwig
33659ebbae block: remove wrappers for request type/flags
Remove all the trivial wrappers for the cmd_type and cmd_flags fields in
struct requests.  This allows much easier grepping for different request
types instead of unwinding through macros.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-07 18:17:56 +02:00
Tejun Heo
e4025f6c21 block: don't set REQ_NOMERGE unnecessarily
RQ_NOMERGE_FLAGS already clears defines which REQ flags aren't
mergeable.  There is no reason to specify it superflously.  It only
adds to confusion.  Don't set REQ_NOMERGE for barriers and requests
with specific queueing directive.  REQ_NOMERGE is now exclusively used
by the merging code.

[ Impact: cleanup ]

Signed-off-by: Tejun Heo <tj@kernel.org>
2009-04-28 07:37:33 +02:00
Randy Dunlap
710027a48e Add some block/ source files to the kernel-api docbook. Fix kernel-doc notation in them as needed. Fix changed function parameter names. Fix typos/spellos. In comments, change REQ_SPECIAL to REQ_TYPE_SPECIAL and REQ_BLOCK_PC to REQ_TYPE_BLOCK_PC.
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09 08:56:03 +02:00
FUJITA Tomonori
681a561b7e block: unexport blk_end_sync_rq
All the users of blk_end_sync_rq has gone (they are converted to use
blk_execute_rq). This unexports blk_end_sync_rq.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-15 21:21:45 +02:00
Bartlomiej Zolnierkiewicz
9a2d43b756 block: handle blk_pm_resume_request() requests in blk_execute_rq_nowait()
For blk_pm_resume_request() requests (which are used only by IDE subsystem
currently) the queue is stopped so we need to call ->request_fn explicitly.

Thanks to:
- Rafael for reporting/bisecting the bug
- Borislav/Rafael for testing the fix

This is a preparation for converting IDE to use blk_execute_rq().

Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Borislav Petkov <petkovbb@gmail.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-15 21:21:43 +02:00
Jens Axboe
6728cb0e63 block: make core bits checkpatch compliant
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-02-01 09:26:33 +01:00
Jens Axboe
86db1e2977 block: continue ll_rw_blk.c splitup
Adds files for barrier handling, rq execution, io context handling,
mapping data to requests, and queue settings.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-01-29 21:55:08 +01:00