Commit Graph

103 Commits

Author SHA1 Message Date
Alexandre Courbot
7fd2bf3d32 Remove GENERIC_GPIO config option
GENERIC_GPIO has been made equivalent to GPIOLIB in architecture code
and all driver code has been switch to depend on GPIOLIB. It is thus
safe to have GENERIC_GPIO removed.

Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
2013-04-16 18:47:19 +09:00
Stephen Rothwell
4febd95a8a Select VIRT_TO_BUS directly where needed
In commit 887cbce0ad ("arch Kconfig: centralise ARCH_NO_VIRT_TO_BUS")
I introduced the config sybmol HAVE_VIRT_TO_BUS and selected that where
needed.  I am not sure what I was thinking.  Instead, just directly
select VIRT_TO_BUS where it is needed.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-03-12 11:16:40 -07:00
Stephen Rothwell
887cbce0ad arch Kconfig: centralise CONFIG_ARCH_NO_VIRT_TO_BUS
Change it to CONFIG_HAVE_VIRT_TO_BUS and set it in all architecures
that already provide virt_to_bus().

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reviewed-by: James Hogan <james.hogan@imgtec.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: H Hartley Sweeten <hartleys@visionengravers.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Vineet Gupta <Vineet.Gupta1@synopsys.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-27 19:10:23 -08:00
Al Viro
d64008a8f3 burying unused conditionals
__ARCH_WANT_SYS_RT_SIGACTION,
__ARCH_WANT_SYS_RT_SIGSUSPEND,
__ARCH_WANT_COMPAT_SYS_RT_SIGSUSPEND,
__ARCH_WANT_COMPAT_SYS_SCHED_RR_GET_INTERVAL - not used anymore
CONFIG_GENERIC_{SIGALTSTACK,COMPAT_RT_SIG{ACTION,QUEUEINFO,PENDING,PROCMASK}} -
can be assumed always set.
2013-02-14 09:21:15 -05:00
Al Viro
8be433ab55 m68k: switch to generic old sigaction()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-02-03 18:16:00 -05:00
Al Viro
1ba3e7efb6 m68k: switch to generic old sigsuspend
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-02-03 18:16:00 -05:00
Al Viro
08d4f65352 m68k: switch to generic sigaltstack
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-02-03 18:16:00 -05:00
Al Viro
ae903caae2 Bury the conditionals from kernel_thread/kernel_execve series
All architectures have
	CONFIG_GENERIC_KERNEL_THREAD
	CONFIG_GENERIC_KERNEL_EXECVE
	__ARCH_WANT_SYS_EXECVE
None of them have __ARCH_WANT_KERNEL_EXECVE and there are only two callers
of kernel_execve() (which is a trivial wrapper for do_execve() now) left.
Kill the conditionals and make both callers use do_execve().

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-12-19 18:07:38 -05:00
Al Viro
fea8221049 m68k: switch to saner kernel_execve() semantics
Acked-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-10-17 02:29:27 -04:00
Linus Torvalds
d25282d1c9 Merge branch 'modules-next' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux
Pull module signing support from Rusty Russell:
 "module signing is the highlight, but it's an all-over David Howells frenzy..."

Hmm "Magrathea: Glacier signing key". Somebody has been reading too much HHGTTG.

* 'modules-next' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: (37 commits)
  X.509: Fix indefinite length element skip error handling
  X.509: Convert some printk calls to pr_devel
  asymmetric keys: fix printk format warning
  MODSIGN: Fix 32-bit overflow in X.509 certificate validity date checking
  MODSIGN: Make mrproper should remove generated files.
  MODSIGN: Use utf8 strings in signer's name in autogenerated X.509 certs
  MODSIGN: Use the same digest for the autogen key sig as for the module sig
  MODSIGN: Sign modules during the build process
  MODSIGN: Provide a script for generating a key ID from an X.509 cert
  MODSIGN: Implement module signature checking
  MODSIGN: Provide module signing public keys to the kernel
  MODSIGN: Automatically generate module signing keys if missing
  MODSIGN: Provide Kconfig options
  MODSIGN: Provide gitignore and make clean rules for extra files
  MODSIGN: Add FIPS policy
  module: signature checking hook
  X.509: Add a crypto key parser for binary (DER) X.509 certificates
  MPILIB: Provide a function to read raw data into an MPI
  X.509: Add an ASN.1 decoder
  X.509: Add simple ASN.1 grammar compiler
  ...
2012-10-14 13:39:34 -07:00
Linus Torvalds
8213a2f3ee Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal
Pull pile 2 of execve and kernel_thread unification work from Al Viro:
 "Stuff in there: kernel_thread/kernel_execve/sys_execve conversions for
  several more architectures plus assorted signal fixes and cleanups.

  There'll be more (in particular, real fixes for the alpha
  do_notify_resume() irq mess)..."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal: (43 commits)
  alpha: don't open-code trace_report_syscall_{enter,exit}
  Uninclude linux/freezer.h
  m32r: trim masks
  avr32: trim masks
  tile: don't bother with SIGTRAP in setup_frame
  microblaze: don't bother with SIGTRAP in setup_rt_frame()
  mn10300: don't bother with SIGTRAP in setup_frame()
  frv: no need to raise SIGTRAP in setup_frame()
  x86: get rid of duplicate code in case of CONFIG_VM86
  unicore32: remove pointless test
  h8300: trim _TIF_WORK_MASK
  parisc: decide whether to go to slow path (tracesys) based on thread flags
  parisc: don't bother looping in do_signal()
  parisc: fix double restarts
  bury the rest of TIF_IRET
  sanitize tsk_is_polling()
  bury _TIF_RESTORE_SIGMASK
  unicore32: unobfuscate _TIF_WORK_MASK
  mips: NOTIFY_RESUME is not needed in TIF masks
  mips: merge the identical "return from syscall" per-ABI code
  ...

Conflicts:
	arch/arm/include/asm/thread_info.h
2012-10-12 10:49:08 +09:00
Catalin Marinas
9b2a60c484 Kconfig: clean up the long arch list for the DEBUG_BUGVERBOSE config option
Introduce HAVE_DEBUG_BUGVERBOSE config option and select it in
corresponding architecture Kconfig files.  Architectures that already
select GENERIC_BUG don't need to select HAVE_DEBUG_BUGVERBOSE.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-09 16:22:14 +09:00
Catalin Marinas
af1839eb4b Kconfig: clean up the long arch list for the UID16 config option
Introduce HAVE_UID16 config option and select it in corresponding
architecture Kconfig files.  UID16 now only depends on HAVE_UID16.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Mikael Starvik <starvik@axis.com>
Cc: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-09 16:22:13 +09:00
Al Viro
533e6903be m68k: split ret_from_fork(), simplify kernel_thread()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-10-01 00:44:44 -04:00
David Howells
786d35d45c Make most arch asm/module.h files use asm-generic/module.h
Use the mapping of Elf_[SPE]hdr, Elf_Addr, Elf_Sym, Elf_Dyn, Elf_Rel/Rela,
ELF_R_TYPE() and ELF_R_SYM() to either the 32-bit version or the 64-bit version
into asm-generic/module.h for all arches bar MIPS.

Also, use the generic definition mod_arch_specific where possible.

To this end, I've defined three new config bools:

 (*) HAVE_MOD_ARCH_SPECIFIC

     Arches define this if they don't want to use the empty generic
     mod_arch_specific struct.

 (*) MODULES_USE_ELF_RELA

     Arches define this if their modules can contain RELA records.  This causes
     the Elf_Rela mapping to be emitted and allows apply_relocate_add() to be
     defined by the arch rather than have the core emit an error message.

 (*) MODULES_USE_ELF_REL

     Arches define this if their modules can contain REL records.  This causes
     the Elf_Rel mapping to be emitted and allows apply_relocate() to be
     defined by the arch rather than have the core emit an error message.

Note that it is possible to allow both REL and RELA records: m68k and mips are
two arches that do this.

With this, some arch asm/module.h files can be deleted entirely and replaced
with a generic-y marker in the arch Kbuild file.

Additionally, I have removed the bits from m32r and score that handle the
unsupported type of relocation record as that's now handled centrally.

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-09-28 14:31:03 +09:30
Greg Ungerer
42b1b94635 m68k: select CONFIG_GENERIC_ATOMIC64 for all m68k CPU types
There is no specific atomic64 support code for any m68k CPUs, so we should
select CONFIG_GENERIC_ATOMC64 for all. Remove the existing per CPU selection
of this and select it for all m68k.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Acked-by: Fengguang Wu <fengguang.wu@intel.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
2012-08-17 10:04:24 +10:00
Linus Torvalds
587a9e1f95 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k
Pull m68k updates from Geert Uytterhoeven.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
  m68k: Make sys_atomic_cmpxchg_32 work on classic m68k
  m68k/apollo: Rename "timer" to "apollo_timer"
  zorro: Remove unused zorro_bus.devices
  m68k: Remove never used asm/shm.h
  m68k/sun3: Remove unselectable code in prom_init()
  m68k: Use asm-generic version of <asm/sections.h>
  m68k: Replace m68k-specific _[se]bss by generic __bss_{start,stop}
  mtd/uclinux: Use generic __bss_stop instead of _ebss
  m68knommu: Allow ColdFire CPUs to use unaligned accesses
  m68k: Remove five unused headers
  m68k: CPU32 does not support unaligned accesses
  m68k: Introduce config option CPU_HAS_NO_UNALIGNED
  m68k: delay, muldi3 - Use CONFIG_CPU_HAS_NO_MULDIV64
  m68k: Move CPU_HAS_* config options
  m68k: Remove duplicate FPU config option
  m68knommu: Clean up printing of sections
  m68k: Use asm-generic version of <asm/types.h>
  m68k: Use Kbuild logic to import asm-generic headers
2012-08-03 10:52:41 -07:00
Will Deacon
c1d7e01d78 ipc: use Kconfig options for __ARCH_WANT_[COMPAT_]IPC_PARSE_VERSION
Rather than #define the options manually in the architecture code, add
Kconfig options for them and select them there instead.  This also allows
us to select the compat IPC version parsing automatically for platforms
using the old compat IPC interface.

Reported-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-30 17:25:21 -07:00
Geert Uytterhoeven
022613e0b0 m68k: Move CPU_HAS_* config options
They belong together with the CPU selection

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Greg Ungerer<gerg@uclinux.org>
2012-06-10 10:18:29 +02:00
Geert Uytterhoeven
f2378ed905 m68k: Remove duplicate FPU config option
It's also defined in arch/m68k/Kconfig.cpu

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Greg Ungerer<gerg@uclinux.org>
2012-06-10 10:18:28 +02:00
Geert Uytterhoeven
d8ce7263e1 m68k: Use generic strncpy_from_user(), strlen_user(), and strnlen_user()
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Greg Ungerer <gerg@uclinux.org>
2012-06-06 15:31:28 +02:00
Thomas Gleixner
764e0da14f timers: Fixup the Kconfig consolidation fallout
Sigh, I missed to check which architecture Kconfig files actually
include the core Kconfig file. There are a few which did not. So we
broke them.

Instead of adding the includes to those, we are better off to move the
include to init/Kconfig like we did already with irqs and others.

This does not change anything for the architectures using the old
style periodic timer mode. It just solves the build wreckage there.

For those architectures which use the clock events infrastructure it
moves the include of the core Kconfig file to "General setup" which is
a way more logical place than having it at random locations specified
by the architecture specific Kconfigs.

Reported-by: Ingo Molnar <mingo@kernel.org>
Cc: Anna-Maria Gleixner <anna-maria@glx-um.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2012-05-21 23:43:46 +02:00
Anna-Maria Gleixner
60a5e4c3d3 m68k: Use generic time config
Signed-off-by: Anna-Maria Gleixner <anna-maria@glx-um.de>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Link: http://lkml.kernel.org/r/20120518163105.808606368@glx-um.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2012-05-21 11:01:42 +02:00
Greg Ungerer
9657a87205 m68k: make support for FPU hardware configurable
The classic m68k code has always supported an FPU (although it may have
been a software emulated one). The non-MMU m68k code has never supported FPU
hardware. To help in merging common code create a configation setting that
signifies if we are builing in FPU support or not.

This switch, CONFIG_FPU, is set as per the current use cases. So it is
always enabled if CONFIG_MMU is set, and disabled otherwise. With a little
extra code it will be possible to disable it on the classic m68k platforms
as well, and to enable it on non-MMU platforms that do have hardware FPU.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
2012-03-05 09:43:05 +10:00
Greg Ungerer
b6c58e8af0 m68knommu: remove unused CONFIG_GENERIC_CMOS_UPDATE option
The CONFIG_GENERIC_CMOS_UPDATE switch is always enabled for the non-MMU
m68k case. But the underlying code to support it, update_persistent_clock(),
doesn't end up doing anything on the currently supported non-MMU platforms.
No platforms supply the necessary function support for writing back the RTC.

So lets remove this option and support code. This also brings m68knommu
in line with the m68k, which doesn't enabled this switch either.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-03-05 09:43:04 +10:00
Ben Hutchings
9f13a1fd45 cpu: Register a generic CPU device on architectures that currently do not
frv, h8300, m68k, microblaze, openrisc, score, um and xtensa currently
do not register a CPU device.  Add the config option GENERIC_CPU_DEVICES
which causes a generic CPU device to be registered for each present CPU,
and make all these architectures select it.

Richard Weinberger <richard@nod.at> covered UML and suggested using
per_cpu.

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-11 15:50:11 -08:00
Linus Torvalds
e343a895a9 lib: use generic pci_iomap on all architectures
Many architectures don't want to pull in iomap.c,
 so they ended up duplicating pci_iomap from that file.
 That function isn't trivial, and we are going to modify it
 https://lkml.org/lkml/2011/11/14/183
 so the duplication hurts.
 
 This reduces the scope of the problem significantly,
 by moving pci_iomap to a separate file and
 referencing that from all architectures.
 
 Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQEcBAABAgAGBQJPBZXBAAoJECgfDbjSjVRpuuYIAIMD0wE96MuTOSBJX4VG8VAP
 UyjL9dsfMRy8CKioQo5/fxpTY07YBCWmNauSSX7pzgcoUKBfYIGn4Z1qwGYsWK9M
 CzLs6PXLTugw0FtKobHZl/klRTWEBS6YOUjp9x568rplwF+Ppk7b993uj7eS/g+e
 T0mUKzqg4/UavbHd9+W5KgC4drQ5hgtu2WZHoUxBK4umnd3C2G+U82Sthg50o/XU
 SC8IGm39K8I36HoIWgXj3Y7nkOP3mQELohOT4ZPiVSmLvGS4i47+ix75anO+8ZvZ
 jxHr8RC85IK1Nd89NZhbKOyvx0QQiwoKUZaTwcWXJNSOADzZnM6icdIsodc+Elo=
 =ccQZ
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost

lib: use generic pci_iomap on all architectures

Many architectures don't want to pull in iomap.c,
so they ended up duplicating pci_iomap from that file.
That function isn't trivial, and we are going to modify it
https://lkml.org/lkml/2011/11/14/183
so the duplication hurts.

This reduces the scope of the problem significantly,
by moving pci_iomap to a separate file and
referencing that from all architectures.

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
  alpha: drop pci_iomap/pci_iounmap from pci-noop.c
  mn10300: switch to GENERIC_PCI_IOMAP
  mn10300: add missing __iomap markers
  frv: switch to GENERIC_PCI_IOMAP
  tile: switch to GENERIC_PCI_IOMAP
  tile: don't panic on iomap
  sparc: switch to GENERIC_PCI_IOMAP
  sh: switch to GENERIC_PCI_IOMAP
  powerpc: switch to GENERIC_PCI_IOMAP
  parisc: switch to GENERIC_PCI_IOMAP
  mips: switch to GENERIC_PCI_IOMAP
  microblaze: switch to GENERIC_PCI_IOMAP
  arm: switch to GENERIC_PCI_IOMAP
  alpha: switch to GENERIC_PCI_IOMAP
  lib: add GENERIC_PCI_IOMAP
  lib: move GENERIC_IOMAP to lib/Kconfig

Fix up trivial conflicts due to changes nearby in arch/{m68k,score}/Kconfig
2012-01-10 18:04:27 -08:00
Greg Ungerer
4a13c6dc64 m68k: ColdFire with MMU enabled uses same clocking code as non-MMU
We want to use the same timer support code for ColdFire CPU's when
running with MMU enabled or not. So use the same time_no.c code even
when the MMU is enabled for ColdFire. This also means we do not want
CONFIG_ARCH_USES_GETTIMEOFFSET set, since that code is only in time_mm.c.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Acked-by: Matt Waddel <mwaddel@yahoo.com>
Acked-by: Kurt Mahan <kmahan@xmission.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-12-30 10:20:43 +10:00
Greg Ungerer
0e6782c880 m68k: compile appropriate mm arch files for ColdFire MMU support
Create a config symbol to enable when using a ColdFire MMU. We then
use that to only compile the necessary arch mm files.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Matt Waddel <mwaddel@yahoo.com>
Acked-by: Kurt Mahan <kmahan@xmission.com>
2011-12-30 10:20:39 +10:00
Greg Ungerer
e08d703cc2 m68k: modify user space access functions to support ColdFire CPUs
Modify the user space access functions to support the ColdFire V4e cores
running with MMU enabled.

The ColdFire processors do not support the "moves" instruction used by
the traditional 680x0 processors for moving data into and out of another
address space. They only support the notion of a single address space,
and you use the usual "move" instruction to access that.

Create a new config symbol (CONFIG_CPU_HAS_ADDRESS_SPACES) to mark the
CPU types that support separate address spaces, and thus also support
the sfc/dfc registers and the "moves" instruction that go along with that.

The code is almost identical for user space access, so lets just use a
define to choose either the "move" or "moves" in the assembler code.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Acked-by: Matt Waddel <mwaddel@yahoo.com>
Acked-by: Kurt Mahan <kmahan@xmission.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-12-30 10:20:21 +10:00
Greg Ungerer
84f3fb7a2a m68k: handle presence of 64bit mul/div instructions cleanly
The traditional 68000 processors and the newer reduced instruction set
ColdFire processors do not support the 32*32->64 multiply or the 64/32->32
divide instructions. This is not a difference based on the presence of
a hardware MMU or not.

Create a new config symbol to mark that a CPU type doesn't support the
longer multiply/divide instructions. Use this then as a basis for using
the fast 64bit based divide (in div64.h) and for linking in the extra
libgcc functions that may be required (mulsi3, divsi3, etc).

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-12-24 21:47:57 +10:00
Greg Ungerer
7f73bafc46 m68k: simpler m68k and ColdFire CPU's can use generic csum code
We have two implementations of the IP checksuming code for the m68k arch.
One uses the more advanced instructions available in 68020 and above
processors, the other uses the simpler instructions available on the
original 68000 processors and the modern ColdFire processors.

This simpler code is pretty much the same as the generic lib implementation
of the IP csum functions. So lets just switch over to using that. That
means we can completely remove the checksum_no.c file, and only have the
local fast code used for the more complex 68k CPU family members.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-12-24 21:47:57 +10:00
Greg Ungerer
5717a02bec m68k: selection of GENERIC_ATOMIC64 is not MMU specific
The selection of the CONFIG_GENERIC_ATOMIC64 option is not specific to the
MMU being present and enabled. It is a property of certain CPU families.
So select it based on those CPU types being selected.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-12-24 21:47:57 +10:00
Michael S. Tsirkin
4673ca8eb3 lib: move GENERIC_IOMAP to lib/Kconfig
define GENERIC_IOMAP in a central location
instead of all architectures. This will be helpful
for the follow-up patch which makes it select
other configs. Code is also a bit shorter this way.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2011-11-24 22:21:19 +02:00
Geert Uytterhoeven
d890d73995 m68k/irq: Remove obsolete m68k irq framework
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-11-08 22:35:52 +01:00
Geert Uytterhoeven
a03010ed9b m68k/q40: Convert Q40/Q60 to genirq
q40_irq_handler() must be kept to translate ISA IRQs to the range 1-15.
q40_probe_irq_o{ff,n}() become unused.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Richard Zidlicky <rz@linux-m68k.org>
2011-11-08 22:35:52 +01:00
Geert Uytterhoeven
dda7535912 m68k/sun3: Convert Sun3/3x to genirq
Replace the custom irq handler that masks the irq and calls do_IRQ(), and
the unmasking in the individual handlers, by handle_level_irq().

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Sam Creasey <sammy@sammy.net>
2011-11-08 22:35:52 +01:00
Geert Uytterhoeven
bc7485acd0 m68k/apollo: Convert Apollo to genirq
Replace the custom user vector interrupt handler that calls do_IRQ() and
does an EOI by handle_fasteoi_irq().

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Peter De Schrijver <p2@debian.org>
2011-11-08 22:35:51 +01:00
Geert Uytterhoeven
6c490c4da4 m68k/vme: Convert VME to genirq
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Richard Hirst <rhirst@parisc-linux.org>
2011-11-08 22:35:51 +01:00
Geert Uytterhoeven
efaf6d28fc m68k/hp300: Convert HP9000/300 and HP9000/400 to genirq
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Philip Blundell <philb@gnu.org>
2011-11-08 22:35:51 +01:00
Geert Uytterhoeven
ddc7fd25d0 m68k/mac: Convert Mac to genirq
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-11-08 22:35:50 +01:00
Geert Uytterhoeven
978ef7e6d0 m68k/amiga: Convert Amiga to genirq
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-11-08 22:35:50 +01:00
Geert Uytterhoeven
e59629ddc6 m68k/atari: Convert Atari to genirq
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
[v1] Acked-by: Thomas Gleixner <tglx@linutronix.de>
2011-11-08 22:35:49 +01:00
Geert Uytterhoeven
4936f63cb7 m68k/irq: Add genirq support
Disabled on all platforms for now

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
[v1] Acked-by: Thomas Gleixner <tglx@linutronix.de>
2011-11-08 22:35:49 +01:00
Greg Ungerer
0e152d8050 m68k: reorganize Kconfig options to improve mmu/non-mmu selections
The current mmu and non-mmu Kconfig files can be merged to form
a more general selection of options. The current break up of options
is due to the simple brute force merge from the m68k and m68knommu
arch directories.

Many of the options are not at all specific to having the MMU enabled
or not. They are actually associated with a particular CPU type or
platform type.

Ultimately as we support all processors with the MMU disabled we need
many of these options to be selectable without the MMU option enabled.
And likewise some of the ColdFire processors, which currently are only
supported with the MMU disabled, do have MMU hardware, and will need
to have options selected on CPU type, not MMU disabled.

This patch removes the old mmu and non-mmu Kconfigs and instead breaks
up the configuration into four areas: cpu, machine, bus, devices.

The Kconfig.cpu lists all the options associated with selecting a CPU,
and includes options specific to each CPU type as well.

Kconfig.machine lists all options associated with selecting a machine
type. Almost always the machines selectable is restricted by the chosen
CPU.

Kconfig.bus contains options associated with selecting bus types on the
various machine types. That includes PCI bus, PCMCIA bus, etc.

Kconfig.devices contains options for drivers and driver associated
options.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-10-18 14:22:25 +10:00
Len Brown
d0e323b470 Merge branch 'apei' into apei-release
Some trivial conflicts due to other various merges
adding to the end of common lists sooner than this one.

	arch/ia64/Kconfig
	arch/powerpc/Kconfig
	arch/x86/Kconfig
	lib/Kconfig
	lib/Makefile

Signed-off-by: Len Brown <len.brown@intel.com>
2011-08-03 11:30:42 -04:00
Huang Ying
df013ffb81 Add Kconfig option ARCH_HAVE_NMI_SAFE_CMPXCHG
cmpxchg() is widely used by lockless code, including NMI-safe lockless
code.  But on some architectures, the cmpxchg() implementation is not
NMI-safe, on these architectures the lockless code may need a
spin_trylock_irqsave() based implementation.

This patch adds a Kconfig option: ARCH_HAVE_NMI_SAFE_CMPXCHG, so that
NMI-safe lockless code can depend on it or provide different
implementation according to it.

On many architectures, cmpxchg is only NMI-safe for several specific
operand sizes. So, ARCH_HAVE_NMI_SAFE_CMPXCHG define in this patch
only guarantees cmpxchg is NMI-safe for sizeof(unsigned long).

Signed-off-by: Huang Ying <ying.huang@intel.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Acked-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Chris Metcalf <cmetcalf@tilera.com>
Acked-by: Richard Henderson <rth@twiddle.net>
CC: Mikael Starvik <starvik@axis.com>
Acked-by: David Howells <dhowells@redhat.com>
CC: Yoshinori Sato <ysato@users.sourceforge.jp>
CC: Tony Luck <tony.luck@intel.com>
CC: Hirokazu Takata <takata@linux-m32r.org>
CC: Geert Uytterhoeven <geert@linux-m68k.org>
CC: Michal Simek <monstr@monstr.eu>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
CC: Kyle McMartin <kyle@mcmartin.ca>
CC: Martin Schwidefsky <schwidefsky@de.ibm.com>
CC: Chen Liqin <liqin.chen@sunplusct.com>
CC: "David S. Miller" <davem@davemloft.net>
CC: Ingo Molnar <mingo@redhat.com>
CC: Chris Zankel <chris@zankel.net>
Signed-off-by: Len Brown <len.brown@intel.com>
2011-08-03 11:12:37 -04:00
Greg Ungerer
171d809df1 m68k: merge mmu and non-mmu bitops.h
The following patch merges the mmu and non-mmu versions of the m68k
bitops.h files. Now there is a good deal of difference between the two
files, but none of it is actually an mmu specific difference. It is
all about the specific m68k/coldfire varient we are targeting. So it
makes an awful lot of sense to merge these into a single bitops.h.

There is a number of ways I can see to factor this code. The approach
I have taken here is to keep the various versions of each macro/function
type together. This means that there is some ifdefery with each to handle
each CPU type.

I have added some comments in a couple of appropriate places to try
and make it clear what the differences we are dealing with are.
Specifically the instruction and addressing mode differences we have
to deal with.

The merged form keeps the same underlying optimizations for each CPU
type for all the general bit clear/set/change and find bit operations.
It does switch to using the generic le operations though, instead of
any local varients.

Build tested on ColdFire, 68328, 68360 (which is cpu32) and 68020+.
Run tested on ColdFire and ARAnyM.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-07-25 11:20:40 +10:00
Geert Uytterhoeven
531d289591 m68knommu: Use generic show_interrupts()
Apart from whitespace differences, /proc/interrupts doesn't change by
enabling GENERIC_IRQ_SHOW.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-05-24 15:17:23 +10:00
Thomas Gleixner
78c8982564 genirq: Remove the now obsolete config options and select statements
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-30 14:13:23 +02:00