Commit Graph

3 Commits

Author SHA1 Message Date
Steven Rostedt
81520a1b06 ftrace: stack tracer only record when on stack
The stack trace API does not record if the stack is not on the current
task's stack. That is, if the stack is the interrupt stack or NMI stack,
the output does not show. Also, the size of those stacks are not
consistent with the size of the thread stack, this makes the calculation
of the stack size usually bogus.

This all confuses the stack tracer. I unfortunately do not have time to
fix all these problems, but this patch does record the worst stack when
the stack pointer is on the tasks stack (instead of bogus numbers).

The patch simply returns if the stack pointer is not on the task's stack.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-20 18:31:37 +02:00
Steven Rostedt
1b6cced6ec ftrace: stack trace add indexes
This patch adds indexes into the stack that the functions in the
stack dump were found at. As an added bonus, I also added a diff
to show which function is the most notorious consumer of the stack.

The output now looks like this:

# cat /debug/tracing/stack_trace
        Depth   Size      Location    (48 entries)
        -----   ----      --------
  0)     2476     212   blk_recount_segments+0x39/0x59
  1)     2264      12   bio_phys_segments+0x16/0x1d
  2)     2252      20   blk_rq_bio_prep+0x23/0xaf
  3)     2232      12   init_request_from_bio+0x74/0x77
  4)     2220      56   __make_request+0x294/0x331
  5)     2164     136   generic_make_request+0x34f/0x37d
  6)     2028      56   submit_bio+0xe7/0xef
  7)     1972      28   submit_bh+0xd1/0xf0
  8)     1944     112   block_read_full_page+0x299/0x2a9
  9)     1832       8   blkdev_readpage+0x14/0x16
 10)     1824      28   read_cache_page_async+0x7e/0x109
 11)     1796      16   read_cache_page+0x11/0x49
 12)     1780      32   read_dev_sector+0x3c/0x72
 13)     1748      48   read_lba+0x4d/0xaa
 14)     1700     168   efi_partition+0x85/0x61b
 15)     1532      72   rescan_partitions+0x10e/0x266
 16)     1460      40   do_open+0x1c7/0x24e
 17)     1420     292   __blkdev_get+0x79/0x84
 18)     1128      12   blkdev_get+0x12/0x14
 19)     1116      20   register_disk+0xd1/0x11e
 20)     1096      28   add_disk+0x34/0x90
 21)     1068      52   sd_probe+0x2b1/0x366
 22)     1016      20   driver_probe_device+0xa5/0x120
 23)      996       8   __device_attach+0xd/0xf
 24)      988      32   bus_for_each_drv+0x3e/0x68
 25)      956      24   device_attach+0x56/0x6c
 26)      932      16   bus_attach_device+0x26/0x4d
 27)      916      64   device_add+0x380/0x4b4
 28)      852      28   scsi_sysfs_add_sdev+0xa1/0x1c9
 29)      824     160   scsi_probe_and_add_lun+0x919/0xa2a
 30)      664      36   __scsi_add_device+0x88/0xae
 31)      628      44   ata_scsi_scan_host+0x9e/0x21c
 32)      584      28   ata_host_register+0x1cb/0x1db
 33)      556      24   ata_host_activate+0x98/0xb5
 34)      532     192   ahci_init_one+0x9bd/0x9e9
 35)      340      20   pci_device_probe+0x3e/0x5e
 36)      320      20   driver_probe_device+0xa5/0x120
 37)      300      20   __driver_attach+0x3f/0x5e
 38)      280      36   bus_for_each_dev+0x40/0x62
 39)      244      12   driver_attach+0x19/0x1b
 40)      232      28   bus_add_driver+0x9c/0x1af
 41)      204      28   driver_register+0x76/0xd2
 42)      176      20   __pci_register_driver+0x44/0x71
 43)      156       8   ahci_init+0x14/0x16
 44)      148     100   _stext+0x42/0x122
 45)       48      20   kernel_init+0x175/0x1dc
 46)       28      28   kernel_thread_helper+0x7/0x10

The first column is simply an index starting from the inner most function
and counting down to the outer most.

The next column is the location that the function was found on the stack.

The next column is the size of the stack for that function.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14 10:36:28 +02:00
Steven Rostedt
e5a81b629e ftrace: add stack tracer
This is another tracer using the ftrace infrastructure, that examines
at each function call the size of the stack. If the stack use is greater
than the previous max it is recorded.

You can always see (and set) the max stack size seen. By setting it
to zero will start the recording again. The backtrace is also available.

For example:

# cat /debug/tracing/stack_max_size
1856

# cat /debug/tracing/stack_trace
[<c027764d>] stack_trace_call+0x8f/0x101
[<c021b966>] ftrace_call+0x5/0x8
[<c02553cc>] clocksource_get_next+0x12/0x48
[<c02542a5>] update_wall_time+0x538/0x6d1
[<c0245913>] do_timer+0x23/0xb0
[<c0257657>] tick_do_update_jiffies64+0xd9/0xf1
[<c02576b9>] tick_sched_timer+0x4a/0xad
[<c0250fe6>] __run_hrtimer+0x3e/0x75
[<c02518ed>] hrtimer_interrupt+0xf1/0x154
[<c022c870>] smp_apic_timer_interrupt+0x71/0x84
[<c021b7e9>] apic_timer_interrupt+0x2d/0x34
[<c0238597>] finish_task_switch+0x29/0xa0
[<c05abd13>] schedule+0x765/0x7be
[<c05abfca>] schedule_timeout+0x1b/0x90
[<c05ab4d4>] wait_for_common+0xab/0x101
[<c05ab5ac>] wait_for_completion+0x12/0x14
[<c033cfc3>] blk_execute_rq+0x84/0x99
[<c0402470>] scsi_execute+0xc2/0x105
[<c040250a>] scsi_execute_req+0x57/0x7f
[<c043afe0>] sr_test_unit_ready+0x3e/0x97
[<c043bbd6>] sr_media_change+0x43/0x205
[<c046b59f>] media_changed+0x48/0x77
[<c046b5ff>] cdrom_media_changed+0x31/0x37
[<c043b091>] sr_block_media_changed+0x16/0x18
[<c02b9e69>] check_disk_change+0x1b/0x63
[<c046f4c3>] cdrom_open+0x7a1/0x806
[<c043b148>] sr_block_open+0x78/0x8d
[<c02ba4c0>] do_open+0x90/0x257
[<c02ba869>] blkdev_open+0x2d/0x56
[<c0296a1f>] __dentry_open+0x14d/0x23c
[<c0296b32>] nameidata_to_filp+0x24/0x38
[<c02a1c68>] do_filp_open+0x347/0x626
[<c02967ef>] do_sys_open+0x47/0xbc
[<c02968b0>] sys_open+0x23/0x2b
[<c021aadd>] sysenter_do_call+0x12/0x26

I've tested this on both x86_64 and i386.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14 10:36:19 +02:00