Commit Graph

498 Commits

Author SHA1 Message Date
Linus Torvalds
8d15b0ec32 Merge branch 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6
* 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
  drm/radeon: switch to using late_initcall
  radeon legacy chips: tv dac bg/dac adj updates
  drm/radeon: introduce kernel modesetting for radeon hardware
  drm: Add the TTM GPU memory manager subsystem.
  drm: Memory fragmentation from lost alignment blocks
  drm/radeon: fix mobility flags on new PCI IDs.
2009-06-16 21:20:39 -07:00
Linus Torvalds
517d08699b Merge branch 'akpm'
* akpm: (182 commits)
  fbdev: bf54x-lq043fb: use kzalloc over kmalloc/memset
  fbdev: *bfin*: fix __dev{init,exit} markings
  fbdev: *bfin*: drop unnecessary calls to memset
  fbdev: bfin-t350mcqb-fb: drop unused local variables
  fbdev: blackfin has __raw I/O accessors, so use them in fb.h
  fbdev: s1d13xxxfb: add accelerated bitblt functions
  tcx: use standard fields for framebuffer physical address and length
  fbdev: add support for handoff from firmware to hw framebuffers
  intelfb: fix a bug when changing video timing
  fbdev: use framebuffer_release() for freeing fb_info structures
  radeon: P2G2CLK_ALWAYS_ONb tested twice, should 2nd be P2G2CLK_DAC_ALWAYS_ONb?
  s3c-fb: CPUFREQ frequency scaling support
  s3c-fb: fix resource releasing on error during probing
  carminefb: fix possible access beyond end of carmine_modedb[]
  acornfb: remove fb_mmap function
  mb862xxfb: use CONFIG_OF instead of CONFIG_PPC_OF
  mb862xxfb: restrict compliation of platform driver to PPC
  Samsung SoC Framebuffer driver: add Alpha Channel support
  atmel-lcdc: fix pixclock upper bound detection
  offb: use framebuffer_alloc() to allocate fb_info struct
  ...

Manually fix up conflicts due to kmemcheck in mm/slab.c
2009-06-16 19:50:13 -07:00
Dave Airlie
4410f39109 fbdev: add support for handoff from firmware to hw framebuffers
With KMS we have ran into an issue where we really want the KMS fb driver
to be the one running the console, so panics etc can be shown by switching
out of X etc.

However with vesafb/efifb built-in, we end up with those on fb0 and the
KMS fb driver on fb1, driving the same piece of hw, so this adds an fb
info flag to denote a firmware fbdev, and adds a new aperture base/size
range which can be compared when the hw drivers are installed to see if
there is a conflict with a firmware driver, and if there is the firmware
driver is unregistered and the hw driver takes over.

It uses new aperture_base/size members instead of comparing on the fix
smem_start/length, as smem_start/length might for example only cover the
first 1MB of the PCI aperture, and we could allocate the kms fb from 8MB
into the aperture, thus they would never overlap.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Dave Airlie <airlied@redhat.com>
Acked-by: Peter Jones <pjones@redhat.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-16 19:48:00 -07:00
Dave Airlie
cc8da5263f drm/radeon: switch to using late_initcall
This fixes an issue where we get inited before fbcon when built-in.

Ideally this should work as a non late_initcall, but this fixes it for now.
We also don't suggest people build this in (at least distro maintainers).

Reported-by: Ryan Hope <rmh3093@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-06-17 07:44:04 +10:00
GeunSik Lim
156f5a7801 debugfs: Fix terminology inconsistency of dir name to mount debugfs filesystem.
Many developers use "/debug/" or "/debugfs/" or "/sys/kernel/debug/"
directory name to mount debugfs filesystem for ftrace according to
./Documentation/tracers/ftrace.txt file.

And, three directory names(ex:/debug/, /debugfs/, /sys/kernel/debug/) is
existed in kernel source like ftrace, DRM, Wireless, Documentation,
Network[sky2]files to mount debugfs filesystem.

debugfs means debug filesystem for debugging easy to use by greg kroah
hartman. "/sys/kernel/debug/" name is suitable as directory name
of debugfs filesystem.
- debugfs related reference: http://lwn.net/Articles/334546/

Fix inconsistency of directory name to mount debugfs filesystem.

* From Steven Rostedt
  - find_debugfs() and tracing_files() in this patch.

Signed-off-by: GeunSik Lim <geunsik.lim@samsung.com>
Acked-by     : Inaky Perez-Gonzalez <inaky@linux.intel.com>
Reviewed-by  : Steven Rostedt <rostedt@goodmis.org>
Reviewed-by  : James Smart <james.smart@emulex.com>
CC: Jiri Kosina <trivial@kernel.org>
CC: David Airlie <airlied@linux.ie>
CC: Peter Osterlund <petero2@telia.com>
CC: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
CC: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
CC: Masami Hiramatsu <mhiramat@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-15 21:30:28 -07:00
Kay Sievers
02200d0664 Driver Core: drm: add nodename for drm devices
This adds support to the drm core to report the proper device name to
userspace for the drm devices.

Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Jan Blunck <jblunck@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-15 21:30:26 -07:00
Alex Deucher
6fe7ac3f5b radeon legacy chips: tv dac bg/dac adj updates
COMBIOS - fallback to table values if there are no tv dac or lvds bios tables
ATOMBIOS - add support for looking up these values from the bios table

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-06-15 12:02:27 +10:00
Jerome Glisse
771fe6b912 drm/radeon: introduce kernel modesetting for radeon hardware
Add kernel modesetting support to radeon driver, use the ttm memory
manager to manage memory and DRM/GEM to provide userspace API.
In order to avoid backward compatibility issue and to allow clean
design and code the radeon kernel modesetting use different code path
than old radeon/drm driver.

When kernel modesetting is enabled the IOCTL of radeon/drm
driver are considered as invalid and an error message is printed
in the log and they return failure.

KMS enabled userspace will use new API to talk with the radeon/drm
driver. The new API provide functions to create/destroy/share/mmap
buffer object which are then managed by the kernel memory manager
(here TTM). In order to submit command to the GPU the userspace
provide a buffer holding the command stream, along this buffer
userspace have to provide a list of buffer object used by the
command stream. The kernel radeon driver will then place buffer
in GPU accessible memory and will update command stream to reflect
the position of the different buffers.

The kernel will also perform security check on command stream
provided by the user, we want to catch and forbid any illegal use
of the GPU such as DMA into random system memory or into memory
not owned by the process supplying the command stream. This part
of the code is still incomplete and this why we propose that patch
as a staging driver addition, future security might forbid current
experimental userspace to run.

This code support the following hardware : R1XX,R2XX,R3XX,R4XX,R5XX
(radeon up to X1950). Works is underway to provide support for R6XX,
R7XX and newer hardware (radeon from HD2XXX to HD4XXX).

Authors:
    Jerome Glisse <jglisse@redhat.com>
    Dave Airlie <airlied@redhat.com>
    Alex Deucher <alexdeucher@gmail.com>

Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-06-15 12:01:53 +10:00
Thomas Hellstrom
ba4e7d973d drm: Add the TTM GPU memory manager subsystem.
TTM is a GPU memory manager subsystem designed for use with GPU
devices with various memory types (On-card VRAM, AGP,
PCI apertures etc.). It's essentially a helper library that assists
the DRM driver in creating and managing persistent buffer objects.

TTM manages placement of data and CPU map setup and teardown on
data movement. It can also optionally manage synchronization of
data on a per-buffer-object level.

TTM takes care to provide an always valid virtual user-space address
to a buffer object which makes user-space sub-allocation of
big buffer objects feasible.

TTM uses a fine-grained per buffer-object locking scheme, taking
care to release all relevant locks when waiting for the GPU.
Although this implies some locking overhead, it's probably a big
win for devices with multiple command submission mechanisms, since
the lock contention will be minimal.

TTM can be used with whatever user-space interface the driver
chooses, including GEM. It's used by the upcoming Radeon KMS DRM driver
and is also the GPU memory management core of various new experimental
DRM drivers.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-06-15 09:37:57 +10:00
Chris Wilson
e6c03c5b40 drm: Memory fragmentation from lost alignment blocks
If the block needs an alignment but otherwise fits exactly into the tail,
then the split-off block from the start would remain marked as non-free.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-06-15 09:35:33 +10:00
Linus Torvalds
6b702462cb Merge branch 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6
* 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (50 commits)
  drm: include kernel list header file in hashtab header
  drm: Export hash table functionality.
  drm: Split out the mm declarations in a separate header. Add atomic operations.
  drm/radeon: add support for RV790.
  drm/radeon: add rv740 drm support.
  drm_calloc_large: check right size, check integer overflow, use GFP_ZERO
  drm: Eliminate magic I2C frobbing when reading EDID
  drm/i915: duplicate desired mode for use by fbcon.
  drm/via: vfree() no need checking before calling it
  drm: Replace DRM_DEBUG with DRM_DEBUG_DRIVER in i915 driver
  drm: Replace DRM_DEBUG with DRM_DEBUG_MODE in drm_mode
  drm/i915: Replace DRM_DEBUG with DRM_DEBUG_KMS in intel_sdvo
  drm/i915: replace DRM_DEBUG with DRM_DEBUG_KMS in intel_lvds
  drm: add separate drm debugging levels
  radeon: remove _DRM_DRIVER from the preadded sarea map
  drm: don't associate _DRM_DRIVER maps with a master
  drm: simplify kcalloc() call to kzalloc().
  intelfb: fix spelling of "CLOCK"
  drm: fix LOCK_TEST_WITH_RETURN macro
  drm/i915: Hook connector to encoder during load detection (fixes tv/vga detect)
  ...
2009-06-12 18:09:18 -07:00
Jerome Glisse
f2cb5d86e1 drm: Export hash table functionality.
add exports so TTM module can use these functions.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-06-12 15:56:33 +10:00
Jerome Glisse
249d6048ca drm: Split out the mm declarations in a separate header. Add atomic operations.
this is a TTM preparation patch, it rearranges the mm and
add operations needed to do mm operations in atomic context.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-06-12 15:56:31 +10:00
Alex Deucher
715cbb05c9 drm/radeon: add support for RV790.
This adds the PCI IDs for the rv790 which are equiv to the rv770.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-06-12 15:56:30 +10:00
Alex Deucher
2a71ebcd85 drm/radeon: add rv740 drm support.
This adds drm support for the RV740 family of chips to the r600 support code.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-06-12 15:56:28 +10:00
Keith Packard
61f11699e7 drm: Eliminate magic I2C frobbing when reading EDID
This code depends on the underlying I2C adapter using the bit-banging algo,
which may not be the case. If specific encoders require this mechanism, they
should build a custom I2C algo that implements this workaround, rather than
having it in the general path.

Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-06-12 15:37:27 +10:00
Dave Airlie
7ff145593d drm/i915: duplicate desired mode for use by fbcon.
duplicate the mode into fbcon storage, so when we free modes later
we don't just lose this.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-06-12 15:00:01 +10:00
Figo.zhang
c5c07550d4 drm/via: vfree() no need checking before calling it
vfree() does it's own NULL checking, no need for explicit check before
calling it.

Signed-off-by: Figo.zhang <figo1802@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-06-12 14:59:59 +10:00
yakui_zhao
be25ed9c5c drm: Replace DRM_DEBUG with DRM_DEBUG_DRIVER in i915 driver
Replace the DRM_DEBUG with the DRM_DEBUG_DRIVER to print the debug info
in i915 driver.

Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-06-12 14:59:58 +10:00
yakui_zhao
f053185948 drm: Replace DRM_DEBUG with DRM_DEBUG_MODE in drm_mode
Replace the DRM_DEBUG with DRM_DEBUG_MODE macro to print the info in drm_mode.

airlied:- fixed up to remove a conflicting #define
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-06-12 14:59:42 +10:00
yakui_zhao
342dc382c4 drm/i915: Replace DRM_DEBUG with DRM_DEBUG_KMS in intel_sdvo
Use the DRM_DEBUG_KMS/DEBUG_LOG_KMS to print the debug info for
SDVO device.

Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-06-11 18:40:44 +10:00
yakui_zhao
7fb85bfb54 drm/i915: replace DRM_DEBUG with DRM_DEBUG_KMS in intel_lvds
Use the DRM_DEBUG_KMS macro definition to print the debug info for
the LVDS.

Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-06-11 18:40:36 +10:00
yakui_zhao
4fefcb2705 drm: add separate drm debugging levels
Now all the DRM debug info will be reported if the boot option of
"drm.debug=1" is added. Sometimes it is inconvenient to get the debug
info in KMS mode. We will get too much unrelated info.

This will separate several DRM debug levels and the debug level can be used
to print the different debug info. And the debug level is controlled by the
module parameter of drm.debug

In this patch it is divided into four debug levels;
       	drm_core, drm_driver, drm_kms, drm_mode.

At the same time we can get the different debug info by changing the debug
level. This can be done by adding the module parameter. Of course it can
be changed through the /sys/module/drm/parameters/debug after the system is
booted.

Four debug macro definitions are provided.
	DRM_DEBUG(fmt, args...)
	DRM_DEBUG_DRIVER(prefix, fmt, args...)
	DRM_DEBUG_KMS(prefix, fmt, args...)
	DRM_DEBUG_MODE(prefix, fmt, args...)

When the boot option of "drm.debug=4" is added, it will print the debug info
using DRM_DEBUG_KMS macro definition.
When the boot option of "drm.debug=6" is added, it will print the debug info
using DRM_DEBUG_KMS/DRM_DEBUG_DRIVER.

Sometimes we expect to print the value of an array.
For example: SDVO command,
In such case the following four DRM debug macro definitions are added:
	DRM_LOG(fmt, args...)
	DRM_LOG_DRIVER(fmt, args...)
	DRM_LOG_KMS(fmt, args...)
	DRM_LOG_MODE(fmt, args...)

Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-06-11 18:36:36 +10:00
Dave Airlie
df4f7fe7bd radeon: remove _DRM_DRIVER from the preadded sarea map
This shouldn't be there and is what broke r600 late in the 2.6.30
release cycle with Ben's patch.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-06-11 16:16:10 +10:00
Ben Skeggs
2ff2e8a3e1 drm: don't associate _DRM_DRIVER maps with a master
A driver will use the _DRM_DRIVER map flag to indicate that it wants
to be responsible for removing the map itself, bypassing the DRM's
automagic cleanup code.

Since the multi-master changes this has been broken, resulting in some
drivers having their registers unmapped before it's finished with them.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-06-11 16:15:29 +10:00
Robert P. J. Day
b798b1fe3b drm: simplify kcalloc() call to kzalloc().
Calls to kcalloc() for a single element can be simplified to calls to
kzalloc().

Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Cc: Dave Airlie <airlied@linux.ie>
Cc: Eric Anholt <eric@anholt.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-06-11 16:10:30 +10:00
Pavel Roskin
1bcbf39488 intelfb: fix spelling of "CLOCK"
Signed-off-by: Pavel Roskin <proski@gnu.org>
Cc: Eric Anholt <eric@anholt.net>
Cc: Dave Airlie <airlied@linux.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-06-11 16:10:29 +10:00
Keith Packard
03d6069912 drm/i915: Hook connector to encoder during load detection (fixes tv/vga detect)
With the DRM-driven DPMS code, encoders are considered idle unless a
connector is hooked to them, so mode setting is skipped. This makes load
detection fail as none of the hardware is enabled.

Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
2009-06-09 15:20:55 -07:00
Chris Wilson
2939e1f533 drm/i915: NOMEM->NOSPC
To differentiate between encountering an out-of-memory error with running
out of space in the aperture, use ENOSPC for the later.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Eric Anholt <eric@anholt.net>
2009-06-09 14:51:39 -07:00
Chris Wilson
21d509e339 drm/i915: use I915_GEM_GPU_DOMAINS
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Eric Anholt <eric@anholt.net>
2009-06-09 14:51:18 -07:00
Chris Wilson
b1ce786cb8 drm/i915: no need to hold mutex for object lookup
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Eric Anholt <eric@anholt.net>
2009-06-09 14:41:37 -07:00
Chris Wilson
1f803ee5ce drm/i915: Call drm_vblank_post_modeset() on error paths.
Ensure that the drm_vblank_pre_modeset() is always balanced by
drm_vblank_post_modeset() within intel_crtc_mode_set().

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Eric Anholt <eric@anholt.net>
2009-06-09 14:41:26 -07:00
Chris Wilson
5f26a2c7ad drm/i915: OR in the COMMAND read domain for the batch buffer.
The batch buffer may be shared with another read buffer, so we should not
ignore any previously set domains, but just or in the command domain (and
check that the buffer is not writable).

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Eric Anholt <eric@anholt.net>
2009-06-09 13:54:05 -07:00
Chris Wilson
83d6079515 drm/i915: Sanity check execbuffer arguments before touching state.
By sending a broken execbuffer (its length was not suitably aligned) I
triggered an operation upon a freed object. The invalid alignment was
discovered after updating the write_domain on the object but before the
object was placed on the active queue. So during the unwind process
following the error, the now freed object attempts to flush its
non-existent, but outstanding, GPU writes causing this use-after-free.

[drm:i915_dispatch_gem_execbuffer] *ERROR* alignment
[drm:i915_gem_execbuffer] *ERROR* dispatch failed -22
WARNING: at lib/kref.c:43 warn_slowpath_null+0x10/0x15()
Modules linked in:
Pid: 4552, comm: lt-csi-drm Not tainted 2.6.30-rc6 #423
Call Trace:
 [<c0119ef3>] warn_slowpath_fmt+0x57/0x6d
 [<c014de24>] ? get_pageblock_migratetype+0x18/0x1e
 [<c014e8fd>] ? free_hot_page+0xa/0xc
 [<c014e915>] ? __free_pages+0x16/0x1f
 [<c0153ebf>] ? shmem_truncate_range+0x63e/0x656
 [<c015fb2f>] ? slob_page_alloc+0x146/0x1c8
 [<c0119f19>] warn_slowpath_null+0x10/0x15
 [<c01f55f2>] kref_get+0x1b/0x21
 [<c02605db>] i915_gem_object_move_to_active+0x1f/0x56
 [<c0261302>] i915_add_request+0x156/0x19a
 [<c026136e>] i915_gem_object_flush_gpu_write_domain+0x28/0x3f
 [<c0261eca>] i915_gem_object_unbind+0x4a/0x124
 [<c0261fd7>] i915_gem_free_object+0x33/0x9b
 [<c0250d6b>] drm_gem_object_free+0x28/0x4a
 [<c0250d43>] ? drm_gem_object_free+0x0/0x4a
 [<c01f55ce>] kref_put+0x38/0x41
 [<c0250cbf>] drm_gem_object_unreference+0x11/0x13
 [<c0250d06>] drm_gem_object_handle_unreference+0x1e/0x21
 [<c0250d13>] drm_gem_object_release_handle+0xa/0xe
 [<c01f3e6b>] idr_for_each+0x5f/0x98
 [<c0250d09>] ? drm_gem_object_release_handle+0x0/0xe
 [<c0250daf>] drm_gem_release+0x22/0x34
 [<c025046f>] drm_release+0x1e8/0x3c4
 [<c0162d25>] __fput+0xaf/0x146
 [<c0162dce>] fput+0x12/0x14
 [<c01605ef>] filp_close+0x48/0x52
 [<c011b182>] put_files_struct+0x57/0x9b
 [<c011b1e4>] exit_files+0x1e/0x20
 [<c011c6b6>] do_exit+0x16d/0x511
 [<c03704ab>] ? __schedule+0x3d4/0x3e5
 [<c0103f0d>] ? handle_irq+0xd/0x69
 [<c011caa7>] do_group_exit+0x4d/0x73
 [<c011cae0>] sys_exit_group+0x13/0x17
 [<c010268c>] sysenter_do_call+0x12/0x2b

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Eric Anholt <eric@anholt.net>
2009-06-09 13:52:57 -07:00
Michael Cousin
fa0864b26b drm/i915: Skip lvds with Aopen i945GTt-VFA
Signed-off-by: Michael Cousin <mika.cousin@gmail.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
2009-06-09 11:56:12 -07:00
Zhenyu Wang
036a4a7d92 drm/i915: handle interrupt on new chipset
Update interrupt handling methods for IGDNG with new registers
for display and graphics interrupt functions. As we won't use
irq-based vblank sync in dri2, so display interrupt on new chip
will be used for hotplug only in future.

Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
2009-06-09 11:15:27 -07:00
Jesse Barnes
d765898970 drm/i915: enable MCHBAR if needed
Using the new PNP resource checking code, this patch allows the i915
driver to allocate MCHBAR space if needed and use the BAR to determine
current memory settings.

[apw@canonical.com: moved to the new generic PNP resource interface]
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Eric Anholt <eric@anholt.net>

failure to update-index after git-am --reject to hand-apply

Signed-off-by: Eric Anholt <eric@anholt.net>
2009-06-09 11:15:07 -07:00
Linus Torvalds
27704a16c9 Revert "drm: don't associate _DRM_DRIVER maps with a master"
This reverts commit 6c51d1cfa0, which
apparently causes DRI initialization failures on Radeons.

Reported-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Requested-by: Dave Airlie <airlied@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-05 10:21:52 -07:00
Jesse Barnes
b66d18ddb1 drm/i915: avoid non-atomic sysrq execution
The sysrq functions are executed in hardirq context, so we shouldn't be
calling sleeping functions from them, like mutex_locks or memory
allocations.

Fix up the i915 sysrq handler to avoid this.

Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
2009-06-05 14:22:33 +00:00
Jesse Barnes
42c2798b35 drm/i915: apply G45 vblank count code to all G4x chips and fix max_frame_count
All G4x and newer chips use the new style frame count register, with a
full 32 bit frame count.  Update the code to reflect this.

Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
2009-06-05 14:22:31 +00:00
Jarod Wilson
70aa96ca2d drm/i915: add ignore lvds quirk info for AOpen Mini PC
Fix a FIXME in the intel LVDS bring-up code, adding the appropriate
blacklist entry for the AOpen Mini PC, courtesy of a dmidecode
dump from Florian Demmer.

Signed-off-by: Jarod Wilson <jarod@redhat.com>
CC: Florian Demmer <florian@demmer.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
2009-06-05 14:22:30 +00:00
yakui_zhao
714605e4a0 drm/i915: Initialize the SDVO device based on the sdvo info parsed from VBT
http://bugs.freedesktop.org/show_bug.cgi?id=20429

Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
[anholt: Massive cleanup of the slave addr function]
Signed-off-by: Eric Anholt <eric@anholt.net>
2009-06-05 14:22:19 +00:00
yakui_zhao
9b9d172d06 drm/i915: parse VBT general definition block to get the SDVO device info
The general definition block contains the child device tables, which include
the SDVO device info. For example: device slave address, device dvo port,
device type.

We will get the info of SDVO device by parsing the general definition blocks.
Only when a valid slave address is found, it is regarded as the SDVO device.
And the info of DVO port and slave address is recorded.

http://bugs.freedesktop.org/show_bug.cgi?id=20429

Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
2009-06-05 14:13:05 +00:00
yakui_zhao
59a036cfbd drm/i915: Add the structure of child_device_config in video BIOS tables.
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
2009-06-05 14:13:02 +00:00
Keith Packard
040d87f15a drm/i915: Add Display Port register defines
This adds the register definitions for the display port enable register
along with those for the GMCH and Link M/N ratios required to drive display
port outputs.

Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
2009-06-05 14:12:59 +00:00
Keith Packard
2245fda810 drm/i915: Don't trim cursor addresses to 11 bits
We can safely assume that cursor addresses will not extend beyond the
addressable screen dimensions; setting the additional bits is harmless in
any case.

Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
2009-06-05 13:09:04 +00:00
Ma Ling
cb66c692d1 drm/i915: Set correct TV detection voltage level override values
We detect TV connect status by setting DAC voltage level override
values as 0.7 voltage for DAC_A/B/C. The corresponding 2-bits shold be 0x2,
In order correctly to set last bit as 0, at first we must clean it.

It fixed freedesktop.org bug #21204

Signed-off-by: Ma Ling <ling.ma@intel.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
2009-06-05 12:53:26 +00:00
Zhenyu Wang
541998a18b drm/i915: Add LVDS support for IGDNG
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
2009-06-05 11:35:49 +00:00
Zhenyu Wang
30ad48b733 drm/i915: Add HDMI support on IGDNG
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
2009-06-05 11:35:17 +00:00
Zhenyu Wang
2c07245fb8 drm/i915: enable kernel modesetting on IGDNG
This adds kernel mode setting on IGDNG with VGA output support.
Note that suspend/resume doesn't work yet.

Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
2009-06-05 11:34:51 +00:00