Commit Graph

813 Commits

Author SHA1 Message Date
Jeff Layton
fc6f394332 cifs: when renaming don't try to unlink negative dentry
When attempting to rename a file on a read-only share, the kernel can
call cifs_unlink on a negative dentry, which causes an oops. Only try
to unlink the file if it's a positive dentry.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Tested-by: Shirish Pargaonkar <shirishp@us.ibm.com>
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2009-04-17 21:08:15 +00:00
Jeff Layton
22c9d52bc0 cifs: remove unneeded bcc_ptr update in CIFSTCon
This pointer isn't used again after this point. It's also not updated in
the ascii case, so there's no need to update it here.

Pointed-out-by: Dave Kleikamp <shaggy@linux.vnet.ibm.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2009-04-17 01:26:50 +00:00
Jeff Layton
313fecfa69 cifs: add cFYI messages with some of the saved strings from ssetup/tcon
...to make it easier to find problems in this area in the future.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2009-04-17 01:26:50 +00:00
Jeff Layton
f083def68f cifs: fix buffer size for tcon->nativeFileSystem field
The buffer for this was resized recently to fix a bug. It's still
possible however that a malicious server could overflow this field
by sending characters in it that are >2 bytes in the local charset.
Double the size of the buffer to account for this possibility.

Also get rid of some really strange and seemingly pointless NULL
termination. It's NULL terminating the string in the source buffer,
but by the time that happens, we've already copied the string.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2009-04-17 01:26:50 +00:00
Jeff Layton
27b87fe52b cifs: fix unicode string area word alignment in session setup
The handling of unicode string area alignment is wrong.
decode_unicode_ssetup improperly assumes that it will always be preceded
by a pad byte. This isn't the case if the string area is already
word-aligned.

This problem, combined with the bad buffer sizing for the serverDomain
string can cause memory corruption. The bad alignment can make it so
that the alignment of the characters is off. This can make them
translate to characters that are greater than 2 bytes each. If this
happens we can overflow the allocation.

Fix this by fixing the alignment in CIFS_SessSetup instead so we can
verify it against the head of the response. Also, clean up the
workaround for improperly terminated strings by checking for a
odd-length unicode buffers and then forcibly terminating them.

Finally, resize the buffer for serverDomain. Now that we've fixed
the alignment, it's probably fine, but a malicious server could
overflow it.

A better solution for handling these strings is still needed, but
this should be a suitable bandaid.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2009-04-17 01:26:50 +00:00
Steve French
88dd47fff4 [CIFS] Fix build break caused by change to new current_umask helper function
Signed-off-by: Steve French <sfrench@us.ibm.com>
2009-04-17 01:26:50 +00:00
Steve French
bc8cd4390c [CIFS] Fix sparse warnings
Signed-off-by: Shirish Pargaonkar <shirishp@us.ibm.com>
CC: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2009-04-17 01:26:49 +00:00
Steve French
a6ce4932fb [CIFS] Add support for posix open during lookup
This patch by utilizing lookup intents, and thus removing a network
roundtrip in the open path, improves performance dramatically on
open (30% or more) to Samba and other servers which support the
cifs posix extensions

Signed-off-by: Shirish Pargaonkar <shirishp@us.ibm.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2009-04-17 01:26:49 +00:00
Jeff Layton
d9fb5c091b cifs: no need to use rcu_assign_pointer on immutable keys
cifs: no need to use rcu_assign_pointer on immutable keys

Neither keytype in use by CIFS has an "update" method. This means that
the keys are immutable once instantiated. We don't need to use RCU
to set the payload data pointers.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2009-04-17 01:26:49 +00:00
Jeff Layton
5144ebf408 cifs: remove dnotify thread code
cifs: remove dnotify thread code

Al Viro recently removed the dir_notify code from the kernel along with
the CIFS code that used it. We can also get rid of the dnotify thread
as well.

In actuality, it never had anything to do with dir_notify anyway. All
it did was unnecessarily wake up all the tasks waiting on the response
queues every 15s. Previously that happened to prevent tasks from hanging
indefinitely when the server went unresponsive, but we put those to
sleep with proper timeouts now so there's no reason to keep this around.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2009-04-17 01:26:49 +00:00
Steve French
2d6d589d80 [CIFS] remove some build warnings
Signed-off-by: Steve French <sfrench@us.ibm.com>
2009-04-17 01:26:49 +00:00
Jeff Layton
fbec9ab952 cifs: vary timeout on writes past EOF based on offset (try #5)
This is the fourth version of this patch:

The first three generated a compiler warning asking for explicit curly
braces.

The first two didn't handle update the size correctly when writes that
didn't start at the eof were done.

The first patch also didn't update the size correctly when it explicitly
set via truncate().

This patch adds code to track the client's current understanding of the
size of the file on the server separate from the i_size, and then to use
this info to semi-intelligently set the timeout for writes past the EOF.

This helps prevent timeouts when trying to write large, sparse files on
windows servers.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2009-04-17 01:26:49 +00:00
Steve French
d036f50fc2 [CIFS] Fix build break from recent DFS patch when DFS support not enabled
Signed-off-by: Steve French <sfrench@us.ibm.com>
2009-04-17 01:26:48 +00:00
Igor Mammedov
1bfe73c258 Remote DFS root support.
Allows to mount share on a server that returns -EREMOTE
 at the tree connect stage or at the check on a full path
 accessibility.

Signed-off-by: Igor Mammedov <niallain@gmail.com>
Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2009-04-17 01:26:48 +00:00
Steve French
85a6dac54a [CIFS] Endian convert UniqueId when reporting inode numbers from server files
Jeff made a good point that we should endian convert the UniqueId when we use
it to set i_ino Even though this value is opaque to the client, when comparing
the inode numbers of the same server file from two different clients (one
big endian, one little endian) or when we compare a big endian client's view
of i_ino with what the server thinks - we should get the same value

Signed-off-by: Steve French <sfrench@us.ibm.com>
2009-04-17 01:26:48 +00:00
Wei Yongjun
74496d365a cifs: remove some pointless conditionals before kfree()
Remove some pointless conditionals before kfree().

Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2009-04-17 01:26:48 +00:00
Jeff Layton
0f4d634c59 cifs: flush data on any setattr
We already flush all the dirty pages for an inode before doing
ATTR_SIZE and ATTR_MTIME changes. There's another problem though -- if
we change the mode so that the file becomes read-only then we may not
be able to write data to it after a reconnect.

Fix this by just going back to flushing all the dirty data on any
setattr call. There are probably some cases that can be optimized out,
but I'm not sure they're worthwhile and we need to consider them more
carefully to make sure that we don't cause regressions if we have
to reconnect before writeback occurs.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2009-04-17 01:26:48 +00:00
Al Viro
ce3b0f8d5c New helper - current_umask()
current->fs->umask is what most of fs_struct users are doing.
Put that into a helper function.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-03-31 23:00:26 -04:00
Alexey Dobriyan
99b7623380 proc 2/2: remove struct proc_dir_entry::owner
Setting ->owner as done currently (pde->owner = THIS_MODULE) is racy
as correctly noted at bug #12454. Someone can lookup entry with NULL
->owner, thus not pinning enything, and release it later resulting
in module refcount underflow.

We can keep ->owner and supply it at registration time like ->proc_fops
and ->data.

But this leaves ->owner as easy-manipulative field (just one C assignment)
and somebody will forget to unpin previous/pin current module when
switching ->owner. ->proc_fops is declared as "const" which should give
some thoughts.

->read_proc/->write_proc were just fixed to not require ->owner for
protection.

rmmod'ed directories will be empty and return "." and ".." -- no harm.
And directories with tricky enough readdir and lookup shouldn't be modular.
We definitely don't want such modular code.

Removing ->owner will also make PDE smaller.

So, let's nuke it.

Kudos to Jeff Layton for reminding about this, let's say, oversight.

http://bugzilla.kernel.org/show_bug.cgi?id=12454

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
2009-03-31 01:14:44 +04:00
Linus Torvalds
3ae5080f4c Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: (37 commits)
  fs: avoid I_NEW inodes
  Merge code for single and multiple-instance mounts
  Remove get_init_pts_sb()
  Move common mknod_ptmx() calls into caller
  Parse mount options just once and copy them to super block
  Unroll essentials of do_remount_sb() into devpts
  vfs: simple_set_mnt() should return void
  fs: move bdev code out of buffer.c
  constify dentry_operations: rest
  constify dentry_operations: configfs
  constify dentry_operations: sysfs
  constify dentry_operations: JFS
  constify dentry_operations: OCFS2
  constify dentry_operations: GFS2
  constify dentry_operations: FAT
  constify dentry_operations: FUSE
  constify dentry_operations: procfs
  constify dentry_operations: ecryptfs
  constify dentry_operations: CIFS
  constify dentry_operations: AFS
  ...
2009-03-27 16:23:12 -07:00
Sukadev Bhattiprolu
a3ec947c85 vfs: simple_set_mnt() should return void
simple_set_mnt() is defined as returning 'int' but always returns 0.
Callers assume simple_set_mnt() never fails and don't properly cleanup if
it were to _ever_ fail.  For instance, get_sb_single() and get_sb_nodev()
should:

        up_write(sb->s_unmount);
        deactivate_super(sb);

if simple_set_mnt() fails.

Since simple_set_mnt() never fails, would be cleaner if it did not
return anything.

[akpm@linux-foundation.org: fix build]
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-03-27 14:44:03 -04:00
Al Viro
4fd03e84d8 constify dentry_operations: CIFS
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-03-27 14:44:01 -04:00
Steve French
b363b3304b [CIFS] Fix memory overwrite when saving nativeFileSystem field during mount
CIFS can allocate a few bytes to little for the nativeFileSystem field
during tree connect response processing during mount.  This can result
in a "Redzone overwritten" message to be logged.

Signed-off-by: Sridhar Vinay <vinaysridhar@in.ibm.com>
Acked-by: Shirish Pargaonkar <shirishp@us.ibm.com>
CC: Stable <stable@kernel.org>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2009-03-18 05:57:22 +00:00
Steve French
c6c00919ab [CIFS] Rename compose_mount_options to cifs_compose_mount_options.
Make it available to others for reuse.

Signed-off-by: Igor Mammedov <niallain@gmail.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2009-03-18 05:50:07 +00:00
Steve French
64cc2c6369 [CIFS] work around bug in Samba server handling for posix open
Samba server (version 3.3.1 and earlier, and 3.2.8 and earlier) incorrectly
required the O_CREAT flag on posix open (even when a file was not being
created).  This disables posix open (create is still ok) after the first
attempt returns EINVAL (and logs an error, once, recommending that they
update their server).

Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2009-03-12 01:36:21 +00:00
Steve French
276a74a483 [CIFS] Use posix open on file open when server supports it
Signed-off-by: Steve French <sfrench@us.ibm.com>
2009-03-12 01:36:21 +00:00
Jeff Layton
fcc7c09d94 cifs: fix buffer format byte on NT Rename/hardlink
Discovered at Connnectathon 2009...

The buffer format byte and the pad are transposed in NT_RENAME calls
(which are used to set hardlinks). Most servers seem to ignore this
fact, but NetApp filers throw back an error due to this problem. This
patch fixes it.

CC: Stable <stable@kernel.org>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2009-03-12 01:36:21 +00:00
Steve French
0382457744 [CIFS] Add definitions for remoteably fsctl calls
There are about 60 fsctl calls which Windows claims would be able
to be sent remotely and handled by the server. This adds the #defines
for them.  A few of them look immediately useful, but need to also
add the structure definitions for them so they can be sent as SMBs.

Signed-off-by: Steve French <sfrench@us.ibm.com>
2009-03-12 01:36:21 +00:00
Steve French
1adcb71092 [CIFS] add extra null attr check
Although attr == NULL can not happen, this makes cifs_set_file_info safer
in the future since it may not be obvious that the caller can not set
attr to NULL.

Signed-off-by: Steve French <sfrench@us.ibm.com>
2009-03-12 01:36:21 +00:00
Steve French
4717bed680 [CIFS] fix build error
Signed-off-by: Steve French <sfrench@us.ibm.com>
2009-03-12 01:36:20 +00:00
Steve French
7fc8f4e95b [CIFS] reopen file via newer posix open protocol operation if available
If the network connection crashes, and we have to reopen files, preferentially
use the newer cifs posix open protocol operation if the server supports it.

Signed-off-by: Steve French <sfrench@us.ibm.com>
2009-03-12 01:36:20 +00:00
Steve French
be652445fd [CIFS] Add new nostrictsync cifs mount option to avoid slow SMB flush
If this mount option is set, when an application does an
fsync call then the cifs client does not send an SMB Flush
to the server (to force the server to write all dirty data
for this file immediately to disk), although cifs still sends
all dirty (cached) file data to the server and waits for the
server to respond to the write write.  Since SMB Flush can be
very slow, and some servers may be reliable enough (to risk
delaying slightly flushing the data to disk on the server),
turning on this option may be useful to improve performance for
applications that fsync too much, at a small risk of server
crash.  If this mount option is not set, by default cifs will
send an SMB flush request (and wait for a response) on every
fsync call.

Signed-off-by: Steve French <sfrench@us.ibm.com>
2009-03-12 01:36:20 +00:00
Steve French
10e70afa75 [CIFS] DFS no longer experimental
Also updates some DFS flag definitions

Signed-off-by: Steve French <sfrench@us.ibm.com>
2009-03-12 01:36:20 +00:00
Steve French
b298f22355 [CIFS] Send SMB flush in cifs_fsync
In contrast to the now-obsolete smbfs, cifs does not send SMB_COM_FLUSH
in response to an explicit fsync(2) to guarantee that all volatile data
is written to stable storage on the server side, provided the server
honors the request (which, to my knowledge, is true for Windows and
Samba with 'strict sync' enabled).
This patch modifies the cifs_fsync implementation to restore the
fsync-behavior of smbfs by triggering SMB_COM_FLUSH after sending
outstanding data on the client side to the server.

Signed-off-by: Horst Reiterer <horst.reiterer@gmail.com>
Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2009-03-12 01:36:20 +00:00
Steve French
eca6acf915 [CIFS] Fix multiuser mounts so server does not invalidate earlier security contexts
When two different users mount the same Windows 2003 Server share using CIFS,
the first session mounted can be invalidated.  Some servers invalidate the first
smb session when a second similar user (e.g. two users who get mapped by server to "guest")
authenticates an smb session from the same client.

By making sure that we set the 2nd and subsequent vc numbers to nonzero values,
this ensures that we will not have this problem.

Fixes Samba bug 6004, problem description follows:
How to reproduce:

- configure an "open share" (full permissions to Guest user) on Windows 2003
Server (I couldn't reproduce the problem with Samba server or Windows older
than 2003)
- mount the share twice with different users who will be authenticated as guest.

 noacl,noperm,user=john,dir_mode=0700,domain=DOMAIN,rw
 noacl,noperm,user=jeff,dir_mode=0700,domain=DOMAIN,rw

Result:

- just the mount point mounted last is accessible:

Signed-off-by: Steve French <sfrench@us.ibm.com>
2009-02-21 03:37:10 +00:00
Steve French
c3b2a0c640 [CIFS] improve posix semantics of file create
Samba server added support for a new posix open/create/mkdir operation
a year or so ago, and we added support to cifs for mkdir to use it,
but had not added the corresponding code to file create.

The following patch helps improve the performance of the cifs create
path (to Samba and servers which support the cifs posix protocol
extensions).  Using Connectathon basic test1, with 2000 files, the
performance improved about 15%, and also helped reduce network traffic
(17% fewer SMBs sent over the wire) due to saving a network round trip
for the SetPathInfo on every file create.

It should also help the semantics (and probably the performance) of
write (e.g. when posix byte range locks are on the file) on file
handles opened with posix create, and adds support for a few flags
which would have to be ignored otherwise.

Signed-off-by: Steve French <sfrench@us.ibm.com>
2009-02-21 03:37:09 +00:00
Steve French
69765529d7 [CIFS] Fix oops in cifs_strfromUCS_le mounting to servers which do not specify their OS
Fixes kernel bug #10451 http://bugzilla.kernel.org/show_bug.cgi?id=10451

Certain NAS appliances do not set the operating system or network operating system
fields in the session setup response on the wire.  cifs was oopsing on the unexpected
zero length response fields (when trying to null terminate a zero length field).

This fixes the oops.

Acked-by: Jeff Layton <jlayton@redhat.com>
CC: stable <stable@kernel.org>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2009-02-21 03:37:09 +00:00
Jeff Layton
44f68fadd8 cifs: posix fill in inode needed by posix open
function needed to prepare for posix open

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2009-02-21 03:37:08 +00:00
Jeff Layton
950ec52880 cifs: properly handle case where CIFSGetSrvInodeNumber fails
...if it does then we pass a pointer to an unintialized variable for
the inode number to cifs_new_inode. Have it pass a NULL pointer instead.

Also tweak the function prototypes to reduce the amount of casting.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2009-02-21 03:37:08 +00:00
Jeff Layton
132ac7b77c cifs: refactor new_inode() calls and inode initialization
Move new inode creation into a separate routine and refactor the
callers to take advantage of it.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2009-02-21 03:37:07 +00:00
Igor Mammedov
e4cce94c9c [CIFS] Prevent OOPs when mounting with remote prefixpath.
Fixes OOPs with message 'kernel BUG at fs/cifs/cifs_dfs_ref.c:274!'.
Checks if the prefixpath in an accesible while we are still in cifs_mount
and fails with reporting a error if we can't access the prefixpath

Should fix Samba bugs 6086 and 5861 and kernel bug 12192

Signed-off-by: Igor Mammedov <niallain@gmail.com>
Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2009-02-21 03:36:21 +00:00
Steve French
0e2bedaa39 [CIFS] ipv6_addr_equal for address comparison
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2009-01-30 21:24:41 +00:00
Jeff Layton
a9ac49d303 cifs: make sure we allocate enough storage for socket address
The sockaddr declared on the stack in cifs_get_tcp_session is too small
for IPv6 addresses. Change it from "struct sockaddr" to "struct
sockaddr_storage" to prevent stack corruption when IPv6 is used.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2009-01-29 03:32:13 +00:00
Steve French
da505c386c [CIFS] Make socket retry timeouts consistent between blocking and nonblocking cases
We have used approximately 15 second timeouts on nonblocking sends in the past, and
also 15 second SMB timeout (waiting for server responses, for most request types).
Now that we can do blocking tcp sends,
make blocking send timeout approximately the same (15 seconds).

Signed-off-by: Steve French <sfrench@us.ibm.com>
2009-01-29 03:32:13 +00:00
Steve French
f818dd55c4 [CIFS] some cleanup to dir.c prior to addition of posix_open
Signed-off-by: Steve French <sfrench@us.ibm.com>
2009-01-29 03:32:13 +00:00
Steve French
42c245447c [CIFS] revalidate parent inode when rmdir done within that directory
When a search is pending of a parent directory, and a child directory
within it is removed, we need to reset the parent directory's time
so that we don't reuse the (now stale) search results.

Thanks to Gunter Kukkukk for reporting this:

> got the following failure notification on irc #samba:
>
> A user was updating from subversion 1.4 to 1.5, where the
> repository is located on a samba share (independent of
> unix extensions = Yes or No).
> svn 1.4 did work, 1.5 does not.
>
> The user did a lot of stracing of subversion - and wrote a
> testapplet to simulate the failing behaviour.
> I've converted the C++ source to C and added some error cases.
>
> When using "./testdir" on a local file system, "result2"
> is always (nil) as expected - cifs vfs behaves different here!
>
>   ./testdir /mnt/cifs/mounted/share
>
> returns a (failing) valid pointer.

Acked-by: Dave Kleikamp <shaggy@us.ibm.com>
Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2009-01-29 03:32:12 +00:00
Steve French
6a7f8d36c0 [CIFS] Rename md5 functions to avoid collision with new rt modules
When rt modules were added they (each) included their own md5
with names which collided with the existing names of cifs's md5 functions.

Renaming cifs's md5 modules so we don't collide with them.

> Stephen Rothwell wrote:
> When CIFS is built-in (=y) and staging/rt28[67]0 =y, there are multiple
> definitions of:
>
> build-r8250.out:(.text+0x1d8ad0): multiple definition of `MD5Init'
> build-r8250.out:(.text+0x1dbb30): multiple definition of `MD5Update'
> build-r8250.out:(.text+0x1db9b0): multiple definition of `MD5Final'
>
> all of which need to have more unique identifiers for their global
> symbols (e.g., rt28_md5_init, cifs_md5_init, foo, blah, bar).
>

CC: Greg K-H <gregkh@suse.de>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2009-01-29 03:32:12 +00:00
Jeff Layton
0496e02d87 cifs: turn smb_send into a wrapper around smb_sendv
cifs: turn smb_send into a wrapper around smb_sendv

Rename smb_send2 to smb_sendv to make it consistent with kernel naming
conventions for functions that take a vector.

There's no need to have 2 functions to handle sending SMB calls. Turn
smb_send into a wrapper around smb_sendv. This also allows us to
properly mark the socket as needing to be reconnected when there's a
partial send from smb_send.

Also, in practice we always use the address and noblocksnd flag
that's attached to the TCP_Server_Info. There's no need to pass
them in as separate args to smb_sendv.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Acked-by: Dave Kleikamp <shaggy@linux.vnet.ibm.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2009-01-29 03:32:12 +00:00
Linus Torvalds
520c853466 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6:
  inotify: fix type errors in interfaces
  fix breakage in reiserfs_new_inode()
  fix the treatment of jfs special inodes
  vfs: remove duplicate code in get_fs_type()
  add a vfs_fsync helper
  sys_execve and sys_uselib do not call into fsnotify
  zero i_uid/i_gid on inode allocation
  inode->i_op is never NULL
  ntfs: don't NULL i_op
  isofs check for NULL ->i_op in root directory is dead code
  affs: do not zero ->i_op
  kill suid bit only for regular files
  vfs: lseek(fd, 0, SEEK_CUR) race condition
2009-01-05 18:32:06 -08:00
Al Viro
acfa4380ef inode->i_op is never NULL
We used to have rather schizophrenic set of checks for NULL ->i_op even
though it had been eliminated years ago.  You'd need to go out of your
way to set it to NULL explicitly _and_ a bunch of code would die on
such inodes anyway.  After killing two remaining places that still
did that bogosity, all that crap can go away.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-01-05 11:54:28 -05:00