Commit Graph

2177 Commits

Author SHA1 Message Date
Stephen Hemminger
01bd75645f sky2: edge triggered workaround enhancement
Need to make the edge-triggered workaround timer faster to get marginally
better peformance. The test_and_set_bit in schedule_prep() acts as a barrier
already. Make it a module parameter so that laptops who are concerned
about power can set it to 0; and user's stuck with broken BIOS's
can turn the driver into pure polling.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
2006-05-08 16:00:27 -07:00
Stephen Hemminger
cb5d954730 sky2: use mask instead of modulo operation
Gcc isn't smart enough to know that it can do a modulo
operation with power of 2 constant by doing a mask.
So add macro to do it for us.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
2006-05-08 16:00:27 -07:00
Stephen Hemminger
f55925d7eb sky2: tx ring index mask fix
Mask for transmit ring status was picking up bits from the
unused sync ring.  They were always zero, so far...
Also, make sure to remind self not to make tx ring too big.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
2006-05-08 16:00:25 -07:00
Stephen Hemminger
1e5f1283a2 sky2: status irq hang fix
The status interrupt flag should be cleared before processing,
not afterwards to avoid race. Need to process in poll routine
even if no new interrupt status. This is a normal occurrence when
more than 64 frames (NAPI weight) are processed in one poll routine.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
2006-05-08 16:00:24 -07:00
Stephen Hemminger
d324031245 sky2: backout NAPI reschedule
This is a backout of earlier patch.

The whole rescheduling hack was a bad idea. It doesn't really solve
the problem and it makes the code more complicated for no good reason.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
2006-05-08 16:00:23 -07:00
Randy Dunlap
0eb1bd210d [IRDA] irda-usb: use NULL instead of 0
Use NULL instead of 0 for a null pointer value (sparse warning):

drivers/net/irda/irda-usb.c:1781:30: warning: Using plain integer as NULL pointer

Also, correct timeout argument to use milliseconds instead of jiffies.

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-05-06 18:34:10 -07:00
Ralf Baechle DL5RB
3ab33dcc82 [HAMRADIO]: Remove remaining SET_MODULE_OWNER calls from hamradio drivers.
Signed-off-by: Ralf Baechle DL5RB <ralf@linux-mips.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-05-03 23:24:35 -07:00
Ayaz Abdulla
ebf34c9b6f forcedeth: fix multi irq issues
This patch fixes the issues with multiple irqs.

I am resending based on feedback. I decoupled the dma mask for
consistent memory and fixed leak with multiple irq in error path.

Thanks to Manfred for catching the spin lock problem.

Signed-Off-By: Ayaz Abdulla <aabdulla@nvidia.com>
2006-05-02 15:26:06 -04:00
Craig Brind
3e0d167a6b [PATCH] via-rhine: zero pad short packets on Rhine I ethernet cards
Fixes Rhine I cards disclosing fragments of previously transmitted frames
in new transmissions.

Before transmission, any socket buffer (skb) shorter than the ethernet
minimum length of 60 bytes was zero-padded.  On Rhine I cards the data can
later be copied into an aligned transmission buffer without copying this
padding.  This resulted in the transmission of the frame with the extra
bytes beyond the provided content leaking the previous contents of this
buffer on to the network.

Now zero-padding is repeated in the local aligned buffer if one is used.

Following a suggestion from the via-rhine maintainer, no attempt is made
here to avoid the duplicated effort of padding the skb if it is known that
an aligned buffer will definitely be used.  This is to make the change
"obviously correct" and allow it to be applied to a stable kernel if
necessary.  There is no change to the flow of control and the changes are
only to the Rhine I code path.

The patch has run on an in-service Rhine-I host without incident.  Frames
shorter than 60 bytes are now correctly zero-padded when captured on a
separate host.  I see no unusual stats reported by ifconfig, and no unusual
log messages.

Signed-off-by: Craig Brind <craigbrind@gmail.com>
Signed-off-by: Roger Luethi <rl@hellgate.ch>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-05-02 15:21:52 -04:00
Olaf Hering
b0b8dab288 [PATCH] mv643xx_eth: provide sysfs class device symlink
On Sat, Mar 11, Olaf Hering wrote:
> Why is the /sys/class/net/eth0/device symlink not created for the
> mv643xx_eth driver? Does this work for other platform device drivers?
> Seems to work for the ps2 keyboard at least.

The SET_NETDEV_DEV has to be done before a call to register_netdev.  With
the new patch below, the device symlink for the platform device was
created.  Unfortunately, after the 4 ls commands, the network connection
died.  No idea if the box crashed or if something else broke, lost remote
access.

Provide sysfs 'device' in /class/net/ethN Also, set module owner field,
like pcnet32 driver does.

Signed-off-by: Olaf Hering <olh@suse.de>
Acked-by: Dale Farnsworth <dale@farnsworth.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-05-02 15:18:54 -04:00
Michael Chan
b276764091 [TG3]: Update version and reldate
Update version to 3.57.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-04-29 19:01:06 -07:00
Michael Chan
f6d9a2565b [TG3]: Fix bug in nvram write
Fix bug in nvram write function. If the starting nvram address offset
happens to be the last dword of the page, the NVRAM_CMD_LAST bit will
not get set in the existing code. This patch fixes the bug by changing
the "else if" to "if" so that the last dword condition always gets
checked.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-04-29 19:00:24 -07:00
Gary Zambrano
8e7a22e3eb [TG3]: Add reset_phy parameter to chip reset functions
Add a reset_phy parameter to tg3_reset_hw() and tg3_init_hw(). With
the full chip reset during MAC address change, the automatic PHY reset
during chip reset will cause a link down and bonding will not work
properly as a result. With this reset_phy parameter, we can do a chip
reset without link down when changing MAC address or MTU.

Signed-off-by: Gary Zambrano <zambrano@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-04-29 18:59:13 -07:00
Michael Chan
58712ef9f2 [TG3]: Reset chip when changing MAC address
Do the full chip reset when changing MAC address if ASF is enabled.

ASF sometimes uses a different MAC address than the driver. Without
the reset, the ASF MAC address may be overwritten when the driver's
MAC address is changed.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-04-29 18:58:01 -07:00
Michael Chan
c424cb249d [TG3]: Add phy workaround
Add some PHY workaround code to reduce jitter on some PHYs.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-04-29 18:56:34 -07:00
Michael Chan
c8e1e82b6a [TG3]: Call netif_carrier_off() during phy reset
Add netif_carrier_off() call during tg3_phy_reset(). This is needed
to properly track the netif_carrier state in cases where we do a
PHY reset with interrupts disabled. The SerDes code will not run
properly if the netif_carrier state is wrong.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-04-29 18:55:17 -07:00
Ayaz Abdulla
86a0f04387 [PATCH] forcedeth: fix initialization
This patch fixes the nic initialization. If the nic was in low power
mode, it brings it back to normal power. Also, it utilizes a new
hardware reset during the init.

I am resending based on feedback, I corrected the register size mapping
and delay after posted write.

Signed-Off-By: Ayaz Abdulla <aabdulla@nvidia.com>

Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-26 06:19:46 -04:00
Stephen Hemminger
bdf9c27d02 [PATCH] sky2: version 1.2
Update to version 1.2

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-26 06:19:46 -04:00
Stephen Hemminger
98712e5e33 [PATCH] sky2: reset function can be devinit
The sky2_reset function only called from sky2_probe.
Maybe the compiler was smart enough to figure this out already.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-26 06:19:46 -04:00
Stephen Hemminger
4a15d56f78 [PATCH] sky2: use ALIGN() macro
The ALIGN() macro in kernel.h does the same math that the
sky2 driver was using for padding.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-26 06:19:45 -04:00
Stephen Hemminger
d27ed38765 [PATCH] sky2: add fake idle irq timer
Add an fake NAPI schedule once a second. This is an attempt to work around
for broken configurations with edge-triggered interrupts.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-26 06:19:45 -04:00
Stephen Hemminger
734cbc363b [PATCH] sky2: reschedule if irq still pending
This is a workaround for the case edge-triggered irq's. Several users
seem to have broken configurations sharing edge-triggered irq's. To avoid
losing IRQ's, reshedule if more work arrives.

The changes to netdevice.h are to extract the part that puts device
back in list into separate inline.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-26 06:19:45 -04:00
Jeff Garzik
3b908870b8 Merge branch 'upstream-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 into upstream-fixes 2006-04-26 06:16:50 -04:00
Jeff Garzik
3b85418bc9 Merge branch 'skb_truesize' of git://lost.foo-projects.org/~ahkok/git/linux-2.6 into upstream-fixes 2006-04-26 06:16:05 -04:00
Jeff Garzik
25f73891c3 Merge branch 'master' into upstream-fixes 2006-04-26 06:15:27 -04:00
Auke Kok
bcb49197ed e1000: Update truesize with the length of the packet for packet split
Update skb with the real packet size.


Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
Signed-off-by: John Ronciak <john.ronciak@intel.com>
2006-04-25 22:50:04 -07:00
Michael Buesch
7c241d37fe [PATCH] bcm43xx: make PIO mode usable
This patch fixes PIO mode on the softmac bcm43xx
driver. (A dscape patch will follow).
It mainly fixes endianess issues.
This patch is tested on PowerPC32 and i386.

Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-04-24 15:20:24 -04:00
Pavel Roskin
dac322e39a [PATCH] Fix crash on big-endian systems during scan
The original code was doing arithmetics on a little-endian value.
Reported by Stelios Koroneos <stelios@stelioscellar.com>

Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-04-24 15:20:22 -04:00
Dominik Brodowski
6542729809 [PATCH] pcmcia: add new ID to pcnet_cs
This adds a new ID to pcnet_cs, as noted by Kuro Moji.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-04-22 00:49:12 +02:00
Linus Torvalds
f4ffaa452e Merge branch 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: (21 commits)
  [PATCH] wext: Fix RtNetlink ENCODE security permissions
  [PATCH] bcm43xx: iw_priv_args names should be <16 characters
  [PATCH] bcm43xx: sysfs code cleanup
  [PATCH] bcm43xx: fix pctl slowclock limit calculation
  [PATCH] bcm43xx: fix dyn tssi2dbm memleak
  [PATCH] bcm43xx: fix config menu alignment
  [PATCH] bcm43xx wireless: fix printk format warnings
  [PATCH] softmac: report when scanning has finished
  [PATCH] softmac: fix event sending
  [PATCH] softmac: handle iw_mode properly
  [PATCH] softmac: dont send out packets while scanning
  [PATCH] softmac: return -EAGAIN from getscan while scanning
  [PATCH] bcm43xx: set trans_start on TX to prevent bogus timeouts
  [PATCH] orinoco: fix truncating commsquality RID with the latest Symbol firmware
  [PATCH] softmac: fix spinlock recursion on reassoc
  [PATCH] Revert NET_RADIO Kconfig title change
  [PATCH] wext: Fix IWENCODEEXT security permissions
  [PATCH] wireless/atmel: send WEXT scan completion events
  [PATCH] wireless/airo: clean up WEXT association and scan events
  [PATCH] softmac uses Wiress Ext.
  ...
2006-04-20 15:26:25 -07:00
Andy Fleming
fef6108d45 [PATCH] Fix locking in gianfar
This patch fixes several bugs in the gianfar driver, including a major one
where spinlocks were horribly broken:

* Split gianfar locks into two types: TX and RX
* Made it so gfar_start() now clears RHALT
* Fixed a bug where calling gfar_start_xmit() with interrupts off would
corrupt the interrupt state
* Fixed a bug where a frame could potentially arrive, and never be handled
(if no more frames arrived
* Fixed a bug where the rx_work_limit would never be observed by the rx
completion code
* Fixed a bug where the interrupt handlers were not actually protected by
their spinlocks

Signed-off-by: Andy Fleming <afleming@freescale.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-20 17:55:06 -04:00
Jeff Garzik
f18b95c3e2 Merge branch 'upstream-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 2006-04-20 17:36:10 -04:00
Sergei Shtylyov
17c281ab3e [PATCH] NEx000: fix RTL8019AS base address for RBTX4938
Correct the base address of the Realtek RTL8019AS chip on the Toshiba RBTX4938
board -- this should make the driver work at least when CONFIG_PCI is enabled.

Signed-off-by: Yuri Shpilevsky <yshpilevsky@ru.mvista.com>
Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-20 17:28:57 -04:00
Johannes Berg
d47f3640fe [SUNGEM]: Marvell PHY suspend.
In a short discussion with Benjamin Herrenschmidt he mentioned
that Marvell PHYs are powered down the same way as the other
ones we currently handle. Thus actually do that, hopefully
saving some power during suspend.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-04-19 15:42:28 -07:00
Erik Mouw
a392149ee1 [PATCH] bcm43xx: iw_priv_args names should be <16 characters
The room for the names in bcm43xx_priv_wx_args[] are IFNAMSIZ long and
IFNAMSIZ is defined as 16, so the names in bcm43xx_priv_wx_args should
be 15 characters (16 including the trailing \0). This patch fixes that
for the "set_shortpreambl", "get_shortpreambl", "set_swencryption", and
"get_swencryption" private calls. Patch is against 2.6.17-rc1.

Signed-off-by: Erik Mouw <erik@harddisk-recovery.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-04-19 17:25:41 -04:00
Michael Buesch
b35d649cb2 [PATCH] bcm43xx: sysfs code cleanup
This cleans up the bcm43xx sysfs code and makes it compliant
with the unwritten sysfs rules (at least I hope so).

Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-04-19 17:25:41 -04:00
Michael Buesch
8829d55e6b [PATCH] bcm43xx: fix pctl slowclock limit calculation
This fixes coverity bug:
http://marc.theaimsgroup.com/?l=linux-netdev&m=114417628413880&w=2

Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-04-19 17:25:40 -04:00
Adrian Bunk
2230daa0fd [PATCH] bcm43xx: fix dyn tssi2dbm memleak
This patch fixes a memory leak spotted by the Coverity checker.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-04-19 17:25:40 -04:00
Randy Dunlap
93fef7dda4 [PATCH] bcm43xx: fix config menu alignment
Use "depends on" to make all bcm43xx driver options be listed
at the same level.

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-04-19 17:25:40 -04:00
Randy Dunlap
4c6f749f74 [PATCH] bcm43xx wireless: fix printk format warnings
Fix printk format warnings:
drivers/net/wireless/bcm43xx/bcm43xx_debugfs.c:456: warning: format ‘%u’ expects type ‘unsigned int’, but argument 3 has type ‘size_t’
drivers/net/wireless/bcm43xx/bcm43xx_debugfs.c:460: warning: format ‘%08x’ expects type ‘unsigned int’, but argument 2 has type ‘size_t’
drivers/net/wireless/bcm43xx/bcm43xx_debugfs.c:476: warning: format ‘%u’ expects type ‘unsigned int’, but argument 3 has type ‘size_t’
drivers/net/wireless/bcm43xx/bcm43xx_debugfs.c:480: warning: format ‘%08x’ expects type ‘unsigned int’, but argument 2 has type ‘size_t’
drivers/net/wireless/bcm43xx/bcm43xx_dma.c:200: warning: format ‘%08x’ expects type ‘unsigned int’, but argument 2 has type ‘dma_addr_t’
drivers/net/wireless/bcm43xx/bcm43xx_dma.c:311: warning: format ‘%08x’ expects type ‘unsigned int’, but argument 2 has type ‘dma_addr_t’
drivers/net/wireless/bcm43xx/bcm43xx_dma.c:733: warning: format ‘%08x’ expects type ‘unsigned int’, but argument 2 has type ‘dma_addr_t’

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-04-19 17:25:40 -04:00
Michael Buesch
b79367a5ea [PATCH] bcm43xx: set trans_start on TX to prevent bogus timeouts
Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-04-19 17:25:39 -04:00
Pavel Roskin
a208c4e1ea [PATCH] orinoco: fix truncating commsquality RID with the latest Symbol firmware
Symbol firmware F3.91-71 has an additional word in the commsquality RID.
Extend the receiving buffer by one word to accomodate it.

Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-04-19 17:25:38 -04:00
Jean Tourrilhes
c1783454a3 [PATCH] Revert NET_RADIO Kconfig title change
2.6.17-rc1 changed the title for the entry CONFIG_NET_RADIO. I
personally disagree with this change and want it reverted. Patch for
2.6.17-rc1.
	Rationale : WIRELESS_EXT is an invisible option. Therefore,
the only way for a user to enable it is via NET_RADIO. Some users need
to do that for out-of-tree drivers. Therefore it should be mentionned
in the title of the option.
	Rationale2 : the option just below is called "Wireless
Extension API over RtNetlink". Some users may confuse this option for
the main "Wireless Extension" option. Therefore reverting this change
help disambiguate the relation between those two options.

Signed-off-by: Jean Tourrilhes <jt@hpl.hp.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-04-19 17:25:38 -04:00
Dan Williams
3a1af6ffe4 [PATCH] wireless/atmel: send WEXT scan completion events
Send scan completion events to user space when a scan completes.

Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-04-19 17:25:38 -04:00
Dan Williams
6fcdf565ff [PATCH] wireless/airo: clean up WEXT association and scan events
Airo firmware versions >= 5.30.17 send re-association events to the
driver that are currently unrecognized, causing spurious disassociation
events to be sent to user space.  Loss of sync due to scan requests also
results in disassociation events sent to user space.  This patch traps
those two events; suppressing sync-loss on scan, and sending the correct
association event on re-association notifications.

Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-04-19 17:25:37 -04:00
Linus Walleij
08d099974a [IRDA]: smsc-ircc2, smcinit support for ALi ISA bridges
From: Linus Walleij <triad@df.lth.se>

This patch enables support for ALi ISA bridges when we run the smcinit
code.  It is needed to properly configure some Toshiba laptops.

Signed-off-by: Samuel Ortiz <samuel.ortiz@nokia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-04-14 16:03:33 -07:00
Samuel Ortiz
269690ac16 [IRDA]: irda-usb, unregister netdev when patch upload fails
In the STIR421x case, when the firmware upload fails, we need to
unregister_netdev. Otherwise we hit a BUG on free_netdev(), if sysfs
is enabled.
 
Signed-off-by: Samuel Ortiz <samuel.ortiz@nokia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-04-14 16:02:07 -07:00
Linus Torvalds
2e9f0e1867 Merge branch 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6:
  [PATCH] Use pci_set_consistent_dma_mask in ixgb driver
  [PATCH] sky2: bad memory reference on dual port cards
  [PATCH] mv643xx_eth: Fix tx_timeout to only conditionally wake tx queue
  [PATCH] mv643xx_eth: Always free completed tx descs on tx interrupt
  [PATCH] net drivers: fix section attributes for gcc
  [PATCH] remove drivers/net/hydra.h
  [PATCH] drivers/net/via-rhine.c: make a function static
  [netdrvr b44] trim trailing whitespace
  [PATCH] b44: increase version to 1.00
  [PATCH] b44: disable default tx pause
  [PATCH] via-rhine: execute bounce buffers code on Rhine-I only
  [PATCH] network: axnet_cs.c: add missing 'PRIV' in ei_rx_overrun
  [PATCH] dlink pci cards using wrong driver
2006-04-12 15:24:06 -07:00
Andreas Schwab
c91e468a48 [PATCH] Use pci_set_consistent_dma_mask in ixgb driver
The ixgb driver is using pci_alloc_consistent, thus is should also use
pci_set_consistent_dma_mask.  This allows the driver to work on SGI
systems.

In case of an error during probing it should also disable the device again.

Signed-off-by: Andreas Schwab <schwab@suse.de>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-12 18:11:23 -04:00
Stephen Hemminger
43f2f10444 [PATCH] sky2: bad memory reference on dual port cards
Sky2 driver will oops referencing bad memory if used on
a dual port card.  The problem is accessing past end of
MIB counter space.

Applies for both 2.6.17 and 2.6.16 (with fuzz)

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-12 18:11:23 -04:00