Commit Graph

50 Commits

Author SHA1 Message Date
Thomas Gleixner
239007b844 genirq: Convert irq_desc.lock to raw_spinlock
Convert locks which cannot be sleeping locks in preempt-rt to
raw_spinlocks.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Ingo Molnar <mingo@elte.hu>
2009-12-14 23:55:33 +01:00
Linus Torvalds
4646575daf Merge branch 'x86-uv-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-uv-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: UV RTC: Always enable RTC clocksource
  x86: UV RTC: Rename generic_interrupt to x86_platform_ipi
  x86: UV RTC: Clean up error handling
  x86: UV RTC: Add clocksource only boot option
  x86: UV RTC: Fix early expiry handling
2009-12-08 13:38:21 -08:00
Linus Torvalds
a77d2e081b Merge branch 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (30 commits)
  x86, apic: Enable lapic nmi watchdog on AMD Family 11h
  x86: Remove unnecessary mdelay() from cpu_disable_common()
  x86, ioapic: Document another case when level irq is seen as an edge
  x86, ioapic: Fix the EOI register detection mechanism
  x86, io-apic: Move the effort of clearing remoteIRR explicitly before migrating the irq
  x86: SGI UV: Map low MMR ranges
  x86: apic: Print out SRAT table APIC id in hex
  x86: Re-get cfg_new in case reuse/move irq_desc
  x86: apic: Remove not needed #ifdef
  x86: io-apic: IO-APIC MMIO should not fail on resource insertion
  x86: Remove asm/apicnum.h
  x86: apic: Do not use stacked physid_mask_t
  x86, apic: Get rid of apicid_to_cpu_present assign on 64-bit
  x86, ioapic: Use snrpintf while set names for IO-APIC resourses
  x86, apic: Use PAGE_SIZE instead of numbers
  x86: Remove local_irq_enable()/local_irq_disable() in fixup_irqs()
  x86: Use EOI register in io-apic on intel platforms
  x86: Force irq complete move during cpu offline
  x86: Remove move_cleanup_count from irq_cfg
  x86, intr-remap: Avoid irq_chip mask/unmask in fixup_irqs() for intr-remapping
  ...
2009-12-05 15:31:25 -08:00
Jan Beulich
0444c9bd0c x86: Tighten conditionals on MCE related statistics
irq_thermal_count is only being maintained when
X86_THERMAL_VECTOR, and both X86_THERMAL_VECTOR and
X86_MCE_THRESHOLD don't need extra wrapping in X86_MCE
conditionals.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Cc: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Cc: Yong Wang <yong.y.wang@intel.com>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Borislav Petkov <borislav.petkov@amd.com>
Cc: Arjan van de Ven <arjan@infradead.org>
LKML-Reference: <4B06AFA902000078000211F8@vpn.id2.novell.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-23 19:40:06 +01:00
Suresh Siddha
5231a68614 x86: Remove local_irq_enable()/local_irq_disable() in fixup_irqs()
To ensure that we handle all the pending interrupts (destined
for this cpu that is going down) in the interrupt subsystem
before the cpu goes offline, fixup_irqs() does:

	local_irq_enable();
	mdelay(1);
	local_irq_disable();

Enabling interrupts is not a good thing as this cpu is already
offline. So this patch replaces that logic with,

	mdelay(1);
	check APIC_IRR bits
	Retrigger the irq at the new destination if any interrupt has arrived
	via IPI.

For IO-APIC level triggered interrupts, this retrigger IPI will
appear as an edge interrupt. ack_apic_level() will detect this
condition and IO-APIC RTE's remoteIRR is cleared using directed
EOI(using IO-APIC EOI register) on Intel platforms and for
others it uses the existing mask+edge logic followed by
unmask+level.

We can also remove mdelay() and then send spuriuous interrupts
to new cpu targets for all the irqs that were handled previously
by this cpu that is going offline. While it works, I have seen
spurious interrupt messages (nothing wrong but still annoying
messages during cpu offline, which can be seen during
suspend/resume etc)

Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Acked-by: Gary Hade <garyhade@us.ibm.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
LKML-Reference: <20091026230002.043281924@sbs-t61.sc.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-02 15:56:37 +01:00
Suresh Siddha
a5e74b8419 x86: Force irq complete move during cpu offline
When a cpu goes offline, fixup_irqs() try to move irq's
currently destined to the offline cpu to a new cpu. But this
attempt will fail if the irq is recently moved to this cpu and
the irq still hasn't arrived at this cpu (for non intr-remapping
platforms this is when we free the vector allocation at the
previous destination) that is about to go offline.

This will endup with the interrupt subsystem still pointing the
irq to the offline cpu, causing that irq to not work any more.

Fix this by forcing the irq to complete its move (its been a
long time we moved the irq to this cpu which we are offlining
now) and then move this irq to a new cpu before this cpu goes
offline.

Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Acked-by: Gary Hade <garyhade@us.ibm.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
LKML-Reference: <20091026230001.848830905@sbs-t61.sc.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-02 15:56:36 +01:00
Suresh Siddha
84e21493a3 x86, intr-remap: Avoid irq_chip mask/unmask in fixup_irqs() for intr-remapping
In the presence of interrupt-remapping, irqs will be migrated in
the process context and we don't do (and there is no need to)
irq_chip mask/unmask while migrating the interrupt.

Similarly fix the fixup_irqs() that get called during cpu
offline and avoid calling irq_chip mask/unmask for irqs that are
ok to be migrated in the process context.

While we didn't observe any race condition with the existing
code, this change takes complete advantage of
interrupt-remapping in the newer generation platforms and avoids
any potential HW lockup's (that often worry Eric :)

Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Acked-by: Eric W. Biederman <ebiederm@xmission.com>
Cc: garyhade@us.ibm.com
LKML-Reference: <20091026230001.661423939@sbs-t61.sc.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-02 15:56:35 +01:00
Suresh Siddha
7a7732bc0f x86: Unify fixup_irqs() for 32-bit and 64-bit kernels
There is no reason to have different fixup_irqs() for 32-bit and
64-bit kernels. Unify by using the superior 64-bit version for
both the kernels.

Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: Gary Hade <garyhade@us.ibm.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
LKML-Reference: <20091026230001.562512739@sbs-t61.sc.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-02 15:56:34 +01:00
Ingo Molnar
a0738a688d Merge branch 'linus' into x86/urgent
Merge reason: pull in latest, to be able to revert a patch there.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-15 08:07:30 +02:00
Dimitri Sivanich
4a4de9c7d7 x86: UV RTC: Rename generic_interrupt to x86_platform_ipi
Signed-off-by: Dimitri Sivanich <sivanich@sgi.com>
LKML-Reference: <20091014142257.GE11048@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-14 18:27:11 +02:00
Li Hong
89ccf465ab x86, perf_event: Rename 'performance counter interrupt'
In 'cdd6c482c9ff9c55475ee7392ec8f672eddb7be6', we renamed
Performance Counters -> Performance Events.

The name showed up in /proc/interrupts also needs a change. I use
PMI (Performance monitoring interrupt) here, since it is the
official name used in Intel's documents.

Signed-off-by: Li Hong <lihong.hi@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <20091014105039.GA22670@uhli>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-14 14:37:24 +02:00
Ingo Molnar
e7ab0f7b50 Revert "x86, timers: Check for pending timers after (device) interrupts"
This reverts commit 9bcbdd9c58.

The real bug producing LatencyTop latencies has been fixed in:

  f5dc375: sched: Update the clock of runqueue select_task_rq() selected

And the commit being reverted here triggers local timer processing
from every device IRQ. If device IRQs come in at a high frequency,
this could cause a performance regression.

The commit being reverted here purely 'fixed' the reported latency
as a side effect, because CPUs were being moved out of idle more
often.

Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Frans Pop <elendil@planet.nl>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <20091008064041.67219b13@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-09 15:58:20 +02:00
Arjan van de Ven
9bcbdd9c58 x86, timers: Check for pending timers after (device) interrupts
Now that range timers and deferred timers are common, I found a
problem with these using the "perf timechart" tool. Frans Pop also
reported high scheduler latencies via LatencyTop, when using
iwlagn.

It turns out that on x86, these two 'opportunistic' timers only get
checked when another "real" timer happens. These opportunistic
timers have the objective to save power by hitchhiking on other
wakeups, as to avoid CPU wakeups by themselves as much as possible.

The change in this patch runs this check not only at timer
interrupts, but at all (device) interrupts. The effect is that:

 1) the deferred timers/range timers get delayed less

 2) the range timers cause less wakeups by themselves because
    the percentage of hitchhiking on existing wakeup events goes up.

I've verified the working of the patch using "perf timechart", the
original exposed bug is gone with this patch. Frans also reported
success - the latencies are now down in the expected ~10 msec
range.

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Tested-by: Frans Pop <elendil@planet.nl>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <20091008064041.67219b13@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-08 17:27:27 +02:00
Andi Kleen
c1ebf83561 x86: mce: Rename CONFIG_X86_NEW_MCE to CONFIG_X86_MCE
Drop the CONFIG_X86_NEW_MCE symbol and change all
references to it to check for CONFIG_X86_MCE directly.

No code changes

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-07-09 18:39:47 -07:00
Ingo Molnar
0d5959723e Merge branch 'linus' into x86/mce3
Conflicts:
	arch/x86/kernel/cpu/mcheck/mce_64.c
	arch/x86/kernel/irq.c

Merge reason: Resolve the conflicts above.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-11 23:31:52 +02:00
Ingo Molnar
940010c5a3 Merge branch 'linus' into perfcounters/core
Conflicts:
	arch/x86/kernel/irqinit.c
	arch/x86/kernel/irqinit_64.c
	arch/x86/kernel/traps.c
	arch/x86/mm/fault.c
	include/linux/sched.h
	kernel/exit.c
2009-06-11 17:55:42 +02:00
Linus Torvalds
7dc3ca39cb Merge branch 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, nmi: Use predefined numbers instead of hardcoded one
  x86: asm/processor.h: remove double declaration
  x86, mtrr: replace MTRRdefType_MSR with msr-index's MSR_MTRRdefType
  x86, mtrr: replace MTRRfix4K_C0000_MSR with msr-index's MSR_MTRRfix4K_C0000
  x86, mtrr: remove mtrr MSRs double declaration
  x86, mtrr: replace MTRRfix16K_80000_MSR with msr-index's MSR_MTRRfix16K_80000
  x86, mtrr: replace MTRRfix64K_00000_MSR with msr-index's MSR_MTRRfix64K_00000
  x86, mtrr: replace MTRRcap_MSR with msr-index's MSR_MTRRcap
  x86: mce: remove duplicated #include
  x86: msr-index.h remove duplicate MSR C001_0015 declaration
  x86: clean up arch/x86/kernel/tsc_sync.c a bit
  x86: use symbolic name for VM86_SIGNAL when used as vm86 default return
  x86: added 'ifndef _ASM_X86_IOMAP_H' to iomap.h
  x86: avoid multiple declaration of kstack_depth_to_print
  x86: vdso/vma.c declare vdso_enabled and arch_setup_additional_pages before they get used
  x86: clean up declarations and variables
  x86: apic/x2apic_cluster.c x86_cpu_to_logical_apicid should be static
  x86 early quirks: eliminate unused function
2009-06-10 15:49:36 -07:00
Hidetoshi Seto
8051dbd2df x86, mce: fix for mce counters
Make the MCE counters work on 32bit and add poll count in
arch_irq_stat_cpu.

Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-06-03 14:48:59 -07:00
Andi Kleen
ca84f69697 x86, mce: add MCE poll count to /proc/interrupts
Keep a count of the machine check polls (or CMCI events) in
/proc/interrupts.

Andi needs this for debugging, but it's also useful in general
to see what's going in by the kernel.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-06-03 14:40:38 -07:00
Andi Kleen
01ca79f141 x86, mce: add machine check exception count in /proc/interrupts
Useful for debugging, but it's also good general policy
to have a counter for all special interrupts there. This makes it easier
to diagnose where a CPU is spending its time.

[ Impact: feature, debugging tool ]

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-06-03 14:40:38 -07:00
H. Peter Anvin
48b1fddbb1 Merge branch 'irq/numa' into x86/mce3
Merge reason: arch/x86/kernel/irqinit_{32,64}.c unified in irq/numa
and modified in x86/mce3; this merge resolves the conflict.

Conflicts:
	arch/x86/kernel/irqinit.c

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-06-01 15:25:31 -07:00
Andi Kleen
4efc0670ba x86, mce: use 64bit machine check code on 32bit
The 64bit machine check code is in many ways much better than
the 32bit machine check code: it is more specification compliant,
is cleaner, only has a single code base versus one per CPU,
has better infrastructure for recovery, has a cleaner way to communicate
with user space etc. etc.

Use the 64bit code for 32bit too.

This is the second attempt to do this. There was one a couple of years
ago to unify this code for 32bit and 64bit.  Back then this ran into some
trouble with K7s and was reverted.

I believe this time the K7 problems (and some others) are addressed.
I went over the old handlers and was very careful to retain
all quirks.

But of course this needs a lot of testing on old systems. On newer
64bit capable systems I don't expect much problems because they have been
already tested with the 64bit kernel.

I made this a CONFIG for now that still allows to select the old
machine check code. This is mostly to make testing easier,
if someone runs into a problem we can ask them to try
with the CONFIG switched.

The new code is default y for more coverage.

Once there is confidence the 64bit code works well on older hardware
too the CONFIG_X86_OLD_MCE and the associated code can be easily
removed.

This causes a behaviour change for 32bit installations. They now
have to install the mcelog package to be able to log
corrected machine checks.

The 64bit machine check code only handles CPUs which support the
standard Intel machine check architecture described in the IA32 SDM.
The 32bit code has special support for some older CPUs which
have non standard machine check architectures, in particular
WinChip C3 and Intel P5.  I made those a separate CONFIG option
and kept them for now. The WinChip variant could be probably
removed without too much pain, it doesn't really do anything
interesting. P5 is also disabled by default (like it
was before) because many motherboards have it miswired, but
according to Alan Cox a few embedded setups use that one.

Forward ported/heavily changed version of old patch, original patch
included review/fixes from Thomas Gleixner, Bert Wesarg.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-05-28 09:24:13 -07:00
Ingo Molnar
e7fd5d4b3d Merge branch 'linus' into perfcounters/core
Merge reason: This brach was on -rc1, refresh it to almost-rc4 to pick up
              the latest upstream fixes.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-29 14:47:05 +02:00
Ingo Molnar
5043124e66 Merge branch 'linus' into x86/apic
Merge reason: new intr-remap patches depend on the s2ram iommu fixes from upstream

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-17 16:18:28 +02:00
Luis Henriques
0f3fd87ce4 perf_counter: fix alignment in /proc/interrupts
Trivial fix on columns alignment in /proc/interrupts file.

Signed-off-by: Luis Henriques <henrix@sapo.pt>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <20090413192449.GA3920@hades.domain.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-13 22:16:51 +02:00
Cyrill Gorcunov
08306ce61d x86: apic - introduce dummy apic operations
Impact: refactor, speed up and robustize code

In case if apic was disabled by kernel option
or by hardware limits we can use dummy operations
in apic->write to simplify the ack_APIC_irq() code.

At the lame time the patch fixes the missed EOI in
do_IRQ function (which has place if kernel is compiled
as X86-32 and interrupt without handler happens where
apic was not asked to be disabled via kernel option).

Note that native_apic_write_dummy() consists of
WARN_ON_ONCE to catch any buggy writes on enabled
APICs. Could be removed after some time of testing.

Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
LKML-Reference: <20090412165058.724788431@openvz.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-12 19:23:53 +02:00
Cyrill Gorcunov
edea7148a8 x86: irq.c - tiny cleanup
Impact: cleanup, robustization

 1) guard ack_bad_irq with printk_ratelimit since there is no
    guarantee we will not be flooded one day

 2) use pr_emerg() helper

Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
LKML-Reference: <20090412165058.277579847@openvz.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-12 19:23:52 +02:00
Jaswinder Singh Rajput
2c1b284e4f x86: clean up declarations and variables
Impact: cleanup, no code changed

 - syscalls.h       update declarations due to unifications
 - irq.c            declare smp_generic_interrupt() before it gets used
 - process.c        declare sys_fork() and sys_vfork() before they get used
 - tsc.c            rename tsc_khz shadowed variable
 - apic/probe_32.c  declare apic_default before it gets used
 - apic/nmi.c       prev_nmi_count should be unsigned
 - apic/io_apic.c   declare smp_irq_move_cleanup_interrupt() before it gets used
 - mm/init.c        declare direct_gbpages and free_initrd_mem before they get used

Signed-off-by: Jaswinder Singh Rajput <jaswinder@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-12 15:20:16 +02:00
Hidetoshi Seto
59d138120d x86: smarten /proc/interrupts output for new counters
Now /proc/interrupts of tip tree has new counters:

  PLT: Platform interrupts

Format change of output, as like that by commit:

  commit 7a81d9a7da
  x86: smarten /proc/interrupts output

should be applied to these new counters too.

Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Cc: Jan Beulich <jbeulich@novell.com>
LKML-Reference: <49C98DEA.8060208@jp.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-08 18:06:07 +02:00
Hidetoshi Seto
7333a8003c x86: smarten /proc/interrupts output for new counters
Now /proc/interrupts of tip tree has new counters:

  CNT: Performance counter interrupts

Format change of output, as like that by commit:

  commit 7a81d9a7da
  x86: smarten /proc/interrupts output

should be applied to these new counters too.

Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Cc: Jan Beulich <jbeulich@novell.com>
LKML-Reference: <49C98DEA.8060208@jp.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-08 18:04:32 +02:00
Peter Zijlstra
b6276f353b perf_counter: x86: self-IPI for pending work
Implement set_perf_counter_pending() with a self-IPI so that it will
run ASAP in a usable context.

For now use a second IRQ vector, because the primary vector pokes
the apic in funny ways that seem to confuse things.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
LKML-Reference: <20090406094517.724626696@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-07 10:48:56 +02:00
Ingo Molnar
f541ae326f Merge branch 'linus' into perfcounters/core-v2
Merge reason: we have gathered quite a few conflicts, need to merge upstream

Conflicts:
	arch/powerpc/kernel/Makefile
	arch/x86/ia32/ia32entry.S
	arch/x86/include/asm/hardirq.h
	arch/x86/include/asm/unistd_32.h
	arch/x86/include/asm/unistd_64.h
	arch/x86/kernel/cpu/common.c
	arch/x86/kernel/irq.c
	arch/x86/kernel/syscall_table_32.S
	arch/x86/mm/iomap_32.c
	include/linux/sched.h
	kernel/Makefile

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-06 09:02:57 +02:00
Jaswinder Singh Rajput
474e56b82c x86: irq.c keep CONFIG_X86_LOCAL_APIC interrupts together
Impact: cleanup

keep CONFIG_X86_LOCAL_APIC interrupts together to avoid extra ifdef

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
2009-03-23 02:08:34 +05:30
Jaswinder Singh Rajput
ce2d8bfd44 x86: irq.c use same path for show_interrupts
Impact: cleanup

SMP and !SMP will use same path for show_interrupts

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
2009-03-23 02:08:00 +05:30
Jan Beulich
7a81d9a7da x86: smarten /proc/interrupts output
Impact: change /proc/interrupts output ABI

With the number of interrupts on large systems growing, assumptions on
the width an interrupt number requires when converted to a decimal
string turn invalid. Therefore, calculate the maximum number of digits
dynamically.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
LKML-Reference: <49B911EB.76E4.0078.0@novell.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-13 02:36:52 +01:00
Dimitri Sivanich
acaabe795a x86: UV, SGI RTC: add generic system vector
This patch allocates a system interrupt vector for various platform
specific uses.

Signed-off-by: Dimitri Sivanich <sivanich@sgi.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: john stultz <johnstul@us.ibm.com>
LKML-Reference: <20090304185605.GA24419@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-04 20:25:37 +01:00
Ingo Molnar
7b6aa335ca x86, apic: remove genapic.h
Impact: cleanup

Remove genapic.h and remove all references to it.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-17 17:52:44 +01:00
Yinghai Lu
c1eeb2de41 x86: fold apic_ops into genapic
Impact: cleanup

make it simpler, don't need have one extra struct.

v2: fix the sgi_uv build

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-17 12:22:20 +01:00
Ingo Molnar
b1864e9a1a Merge branch 'x86/core' into perfcounters/core
Conflicts:
	arch/x86/Kconfig
	arch/x86/kernel/apic.c
	arch/x86/kernel/setup_percpu.c
2009-02-13 09:49:38 +01:00
Jeremy Fitzhardinge
7c1d7cdcef x86: unify do_IRQ()
With the differences in interrupt handling hoisted into handle_irq(),
do_IRQ is more or less identical between 32 and 64 bit, so unify it.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-09 12:16:05 +01:00
Ingo Molnar
af37501c79 Merge branch 'core/percpu' into perfcounters/core
Conflicts:
	arch/x86/include/asm/pda.h

We merge tip/core/percpu into tip/perfcounters/core because of a
semantic and contextual conflict: the former eliminates the PDA,
while the latter extends it with apic_perf_irqs field.

Resolve the conflict by moving the new field to the irq_cpustat
structure on 64-bit too.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-18 18:15:49 +01:00
Brian Gerst
1b437c8c73 x86-64: Move irq stats from PDA to per-cpu and consolidate with 32-bit.
Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2009-01-19 00:38:57 +09:00
Ingo Molnar
506c10f26c Merge commit 'v2.6.29-rc1' into perfcounters/core
Conflicts:
	include/linux/kernel_stat.h
2009-01-11 02:42:53 +01:00
Jaswinder Singh Rajput
6a02e71099 x86: irq.c fix style problems
Impact: cleanup

Fix:

 WARNING: Use #include <linux/smp.h> instead of <asm/smp.h>

 total: 0 errors, 1 warnings

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-04 13:23:04 +01:00
Ingo Molnar
c3d80000e3 x86: export vector_used_by_percpu_irq
Impact: build fix

lguest can be built as a module and makes use of this new symbol:

ERROR: "vector_used_by_percpu_irq" [drivers/lguest/lg.ko] undefined!

export it.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-23 22:37:31 +01:00
Ingo Molnar
241771ef01 performance counters: x86 support
Implement performance counters for x86 Intel CPUs.

It's simplified right now: the PERFMON CPU feature is assumed,
which is available in Core2 and later Intel CPUs.

The design is flexible to be extended to more CPU types as well.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-08 15:47:15 +01:00
Yinghai Lu
0b8f1efad3 sparse irq_desc[] array: core kernel and x86 changes
Impact: new feature

Problem on distro kernels: irq_desc[NR_IRQS] takes megabytes of RAM with
NR_CPUS set to large values. The goal is to be able to scale up to much
larger NR_IRQS value without impacting the (important) common case.

To solve this, we generalize irq_desc[NR_IRQS] to an (optional) array of
irq_desc pointers.

When CONFIG_SPARSE_IRQ=y is used, we use kzalloc_node to get irq_desc,
this also makes the IRQ descriptors NUMA-local (to the site that calls
request_irq()).

This gets rid of the irq_cfg[] static array on x86 as well: irq_cfg now
uses desc->chip_data for x86 to store irq_cfg.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-08 14:31:51 +01:00
Ingo Molnar
e9f95e6373 genirq: fix off by one and coding style
Fix off-by-one in for_each_irq_desc_reverse().

Impact is near zero in practice, because nothing substantial wants to
iterate down to IRQ#0 - but fix it nevertheless.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-10-21 15:54:40 +02:00
Thomas Gleixner
249f6d9eab x86: move ack_bad_irq() to irq.c
Share more duplicated code.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-10-16 16:53:30 +02:00
Thomas Gleixner
6b39ba771e x86: unify show_interrupts() and proc helpers
show_interrupts() and proc helpers are basically the same for
32 and 64 bit. Move them to a shared source file.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-10-16 16:53:29 +02:00