Commit Graph

849 Commits

Author SHA1 Message Date
Ralf Baechle
9a244b95dd [MIPS] Pass NULL not 0 for pointer value.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-10-11 19:31:00 +01:00
Ralf Baechle
c11b3c1bc0 [MIPS] IP27: Make declaration of setup_replication_mask a proper prototype.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-10-11 19:31:00 +01:00
Ralf Baechle
67672f5b1f [MIPS] BigSur: More useful defconfig.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-10-11 19:30:59 +01:00
Mark Mason
472f291df5 [MIPS] Fix compilation warnings in arch/mips/sibyte/bcm1480/smp.c
Signed-off-by: Mark Mason <mason@broadcom.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-10-11 19:30:59 +01:00
Ralf Baechle
f94054121e [MIPS] Workaround for bug in gcc -EB / -EL options.
Certain gcc versions upto gcc 4.1.1 (probably 4.2-subversion as of
2006-10-10 don't properly change the the predefined symbols if -EB / -EL
are used, so we kludge that here.  A bug has been filed at
http://gcc.gnu.org/bugzilla/show_bug.cgi?id=29413.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-10-11 19:30:59 +01:00
Yoichi Yuasa
ea5742830a [MIPS] Fix timer setup for Jazz
Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-10-11 19:30:58 +01:00
Atsushi Nemoto
e04582b7bc [MIPS] Make sure cpu_has_fpu is used only in atomic context
Make sure cpu_has_fpu (which uses smp_processor_id()) is used only in
atomic context.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-10-09 23:20:48 +01:00
Atsushi Nemoto
f5c70dd7f3 [MIPS] Fix build errors related to wbflush.h on tx4927/tx4938.
TX49 CPUs have a SYNC instruction so that CONFIG_CPU_HAS_WB is no
longer needed.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-10-09 23:20:48 +01:00
Ralf Baechle
5536b23514 [MIPS] Alchemy: nuke usbdev; it's useless as is ...
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-10-09 23:20:47 +01:00
Ralf Baechle
0118c3ca9e [MIPS] Malta: Fix build for non-MIPS32/64 configuration.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-10-09 23:20:47 +01:00
Ralf Baechle
0e8f8f54c1 [MIPS] NUMA: Register all nodes before cpus or sysfs will barf.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-10-09 23:20:46 +01:00
Atsushi Nemoto
f431baa55a [MIPS] ret_from_irq adjustment
Make sure that RA on top of interrupt stack is an address of ret_from_irq,
so that dump_stack etc. can trace info interrupted context.

Also this patch fixes except_vec_vi_handler and __smtc_ipi_vector which
seems broken.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-10-09 23:20:46 +01:00
Ralf Baechle
441ee341ad [MIPS] Fix RM9000 wait instruction detection.
Only revisions < 4.0 don't have a functional wait instruction.

From Thomas Koeller (Thomas.Koeller@baslerweb.com).

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-10-09 23:20:45 +01:00
David Howells
40220c1a19 IRQ: Use the new typedef for interrupt handler function pointers
Use the new typedef for interrupt handler function pointers rather than
actually spelling out the full thing each time.  This was scripted with the
following small shell script:

#!/bin/sh
egrep -nHrl -e 'irqreturn_t[ 	]*[(][*]' $* |
while read i
do
    echo $i
    perl -pi -e 's/irqreturn_t\s*[(]\s*[*]\s*([_a-zA-Z0-9]*)\s*[)]\s*[(]\s*int\s*,\s*void\s*[*]\s*[)]/irq_handler_t \1/g' $i || exit $?
done

Signed-Off-By: David Howells <dhowells@redhat.com>
2006-10-09 12:19:47 +01:00
Ralf Baechle
27f768192f [MIPS] Cleanup unnecessary <asm/ptrace.h> inclusions.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-10-09 00:15:28 +01:00
Ralf Baechle
6dab2f4564 [MIPS] DEC: pt_regs fixes for buserror handlers
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-10-09 00:15:28 +01:00
Ralf Baechle
65542070de [MIPS] Fix return type of gt64120_irq.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-10-09 00:15:28 +01:00
Ralf Baechle
d864b96bb0 [MIPS] Ocelot C: Build fix - ll_mv64340_irq takes no more regs argument.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-10-09 00:15:27 +01:00
Ralf Baechle
de4f742b96 [MIPS] Jazz defconfig file.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-10-09 00:15:27 +01:00
Ralf Baechle
06e80113c7 [MIPS] Jazz: build fix - include <linux/screen_info.h>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-10-09 00:15:27 +01:00
Ralf Baechle
3bdcdd681b [MIPS] Jazz: Remove warning. After 7 years probably somebody test this ;)
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-10-09 00:15:27 +01:00
Ralf Baechle
2cf69e765a [MIPS] Jazz: Fix I/O port resources.
struct resource members were shuffeled a while ago.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-10-09 00:15:27 +01:00
Ralf Baechle
d62801e961 [MIPS] DEC: pt_regs fixes for dec_intr_halt.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-10-09 00:15:27 +01:00
Ralf Baechle
937a801576 [MIPS] Complete fixes after removal of pt_regs argument to int handlers.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-10-08 02:38:28 +01:00
Karl-Johan Karlsson
31aa36658a [MIPS] Show actual CPU information in /proc/cpuinfo
Currently, /proc/cpuinfo contains several copies of the information for
whatever processor we happen to be scheduled on. This patch makes it contain
the proper information for each CPU, which is particularly useful on mixed
R12k/R10k IP27 machines.

Signed-off-by: Karl-Johan Karlsson <creideiki@lysator.liu.se>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-10-08 02:38:27 +01:00
Scott Ashcroft
5c90d528b2 [MIPS] Cobalt: Time runs too quickly
A kernel built with HZ==250 runs about 4 four times too quickly on a
Cobalt RaQ2.

Signed-off-by: Scott Ashcroft <scott.ashcroft@talk21.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-10-08 02:38:27 +01:00
Ralf Baechle
59d6ab86a6 [MIPS] Update Malta config.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-10-08 02:38:27 +01:00
David Howells
7d12e780e0 IRQ: Maintain regs pointer globally rather than passing to IRQ handlers
Maintain a per-CPU global "struct pt_regs *" variable which can be used instead
of passing regs around manually through all ~1800 interrupt handlers in the
Linux kernel.

The regs pointer is used in few places, but it potentially costs both stack
space and code to pass it around.  On the FRV arch, removing the regs parameter
from all the genirq function results in a 20% speed up of the IRQ exit path
(ie: from leaving timer_interrupt() to leaving do_IRQ()).

Where appropriate, an arch may override the generic storage facility and do
something different with the variable.  On FRV, for instance, the address is
maintained in GR28 at all times inside the kernel as part of general exception
handling.

Having looked over the code, it appears that the parameter may be handed down
through up to twenty or so layers of functions.  Consider a USB character
device attached to a USB hub, attached to a USB controller that posts its
interrupts through a cascaded auxiliary interrupt controller.  A character
device driver may want to pass regs to the sysrq handler through the input
layer which adds another few layers of parameter passing.

I've build this code with allyesconfig for x86_64 and i386.  I've runtested the
main part of the code on FRV and i386, though I can't test most of the drivers.
I've also done partial conversion for powerpc and MIPS - these at least compile
with minimal configurations.

This will affect all archs.  Mostly the changes should be relatively easy.
Take do_IRQ(), store the regs pointer at the beginning, saving the old one:

	struct pt_regs *old_regs = set_irq_regs(regs);

And put the old one back at the end:

	set_irq_regs(old_regs);

Don't pass regs through to generic_handle_irq() or __do_IRQ().

In timer_interrupt(), this sort of change will be necessary:

	-	update_process_times(user_mode(regs));
	-	profile_tick(CPU_PROFILING, regs);
	+	update_process_times(user_mode(get_irq_regs()));
	+	profile_tick(CPU_PROFILING);

I'd like to move update_process_times()'s use of get_irq_regs() into itself,
except that i386, alone of the archs, uses something other than user_mode().

Some notes on the interrupt handling in the drivers:

 (*) input_dev() is now gone entirely.  The regs pointer is no longer stored in
     the input_dev struct.

 (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking.  It does
     something different depending on whether it's been supplied with a regs
     pointer or not.

 (*) Various IRQ handler function pointers have been moved to type
     irq_handler_t.

Signed-Off-By: David Howells <dhowells@redhat.com>
(cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 15:10:12 +01:00
Vitaly Wool
7009af8cd3 [MIPS] PNX8550 fixups
This patch fixes the compilation errors on PNX8550 and hard-to-track
bug in interrupt handling.
It also corresponds to the latest changes in PNX8550 serial driver.

Signed-off-by: Vitaly Wool <vitalywool@gmail.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-10-04 18:06:15 +01:00
Linus Torvalds
708e16892e Merge git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial
* git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial: (39 commits)
  Add missing maintainer countries in CREDITS
  Fix bytes <-> kilobytes  typo in Kconfig for ramdisk
  fix a typo in Documentation/pi-futex.txt
  BUG_ON conversion for fs/xfs/
  BUG_ON() conversion in fs/nfsd/
  BUG_ON conversion for fs/reiserfs
  BUG_ON cleanups in arch/i386
  BUG_ON cleanup in drivers/net/tokenring/
  BUG_ON cleanup for drivers/md/
  kerneldoc-typo in led-class.c
  debugfs: spelling fix
  rcutorture: Fix incorrect description of default for nreaders parameter
  parport: Remove space in function calls
  Michal Wronski: update contact info
  Spelling fix: "control" instead of "cotrol"
  reboot parameter in Documentation/kernel-parameters.txt
  Fix copy&waste bug in comment in scripts/kernel-doc
  remove duplicate "until" from kernel/workqueue.c
  ite_gpio fix tabbage
  fix file specification in comments
  ...

Fixed trivial path conflicts due to removed files:
   arch/mips/dec/boot/decstation.c, drivers/char/ite_gpio.c
2006-10-03 16:35:11 -07:00
Uwe Zeisberger
f30c226954 fix file specification in comments
Many files include the filename at the beginning, serveral used a wrong one.

Signed-off-by: Uwe Zeisberger <Uwe_Zeisberger@digi.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-10-03 23:01:26 +02:00
Matt LaPlante
4b3f686d4a Attack of "the the"s in arch
The patch below corrects multiple occurances of "the the"
typos across several files, both in source comments and KConfig files.
There is no actual code changed, only text.  Note this only affects the /arch
directory, and I believe I could find many more elsewhere. :)

Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-10-03 22:21:02 +02:00
Ralf Baechle
8db0201026 [MIPS] Fix wreckage after removal of tickadj; convert to GENERIC_TIME.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-10-03 17:59:18 +01:00
Maciej W. Rozycki
3f82164034 [MIPS] DECstation defconfig update
Sanitise a number of settings for the DECstation.

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-10-03 17:59:18 +01:00
Atsushi Nemoto
b58e5d050f [MIPS] Fix size of zones_size and zholes_size array
Commit f06a96844a broke MIPS.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-10-03 17:59:18 +01:00
Ralf Baechle
34c2dd01fd [MIPS] BCM1480: Mask pending interrupts against c0_status.im.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-10-03 17:59:17 +01:00
Maciej W. Rozycki
d599def5cd [MIPS] SB1250: Interrupt handler fixes
Mask cp0.status against cp0.cause.  Additionally, spurious interrupts are
not recorded.

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-10-03 17:59:17 +01:00
Yoichi Yuasa
af8b128719 [MIPS] Remove IT8172-based platforms, ITE 8172G and Globespan IVR support.
As per feature-removal-schedule.txt.

Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Acked-by: Alan Cox <alan@redhat.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-10-03 17:59:17 +01:00
Maciej W. Rozycki
15a1c51404 [MIPS] BCM1250: TRDY timeout tweaks for Broadcom SiByte systems
It was obesrved that at least one older PCI card predating the
requirement for the TRDY signal to respond within 16 clock ticks actually
does not meet this rule nor even the power-on defaults of the PCI bridges
found in development systems built around the Broadcom SiByte SOCs.  Here
is a patch that bumps up the timeout to the highest finite value supported
by these chips, which is 255 clock ticks.  The bridges affected are the
SiByte SOC itself and the SP1011.
    
 This change does not effectively affect systems only having PCI option
cards installed that meet the TRDY requirement of the current PCI spec.
The rule was introduced with PCI 2.1, so any older card may make the
system affected.  If this is the case, performance of the system will
suffer in return for the card working at all.  If this is a concern, then
the solution is not to use such cards.
    
Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

---
2006-10-03 17:59:17 +01:00
Maciej W. Rozycki
3a42aa9348 [MIPS] Remove dead DECstation boot code
Code in arch/mips/dec/boot/ has been dead for long.  Let's get rid of it
before some epidemic spreads.

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-10-03 17:59:17 +01:00
Linus Torvalds
6f3a28f7d1 Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-serial
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-serial: (21 commits)
  [SERIAL] add PNP IDs for FPI based touchscreens
  [SERIAL] Magic SysRq SAK does nothing on serial consoles
  [SERIAL] tickle NMI watchdog on serial output.
  [SERIAL] Fix oops when removing suspended serial port
  [SERIAL] Fix resume handling bug
  [SERIAL] Remove wrong asm/serial.h inclusions
  [SERIAL] CONFIG_PM=n slim: drivers/serial/8250_pci.c
  [SERIAL] OMAP1510 serial fix for 115200 baud
  [SERIAL] returning proper error from serial core driver
  [SERIAL] Make uart_line_info() correctly tell MMIO from I/O port
  [SERIAL] suspend/resume handlers don't have level arg anymore
  [SERIAL] 8250 resourse management fixes
  [SERIAL] serial_cs: Add quirk for brainboxes 2-port RS232 card
  [SERIAL] serial_cs: handle Nokia multi->single port bodge via config quirk
  [SERIAL] serial_cs: add configuration quirk
  [SERIAL] serial_cs: Convert Oxford 950 / Possio GCC wakeup quirk
  [SERIAL] serial_cs: convert IBM post-init handling to a quirk
  [SERIAL] serial_cs: allow wildcarded quirks
  [SERIAL] serial_cs: convert multi-port table to quirk table
  [SERIAL] serial_cs: Use clean up multiport card detection
  ...
2006-10-03 09:13:29 -07:00
David Howells
afefdbb28a [PATCH] VFS: Make filldir_t and struct kstat deal in 64-bit inode numbers
These patches make the kernel pass 64-bit inode numbers internally when
communicating to userspace, even on a 32-bit system.  They are required
because some filesystems have intrinsic 64-bit inode numbers: NFS3+ and XFS
for example.  The 64-bit inode numbers are then propagated to userspace
automatically where the arch supports it.

Problems have been seen with userspace (eg: ld.so) using the 64-bit inode
number returned by stat64() or getdents64() to differentiate files, and
failing because the 64-bit inode number space was compressed to 32-bits, and
so overlaps occur.

This patch:

Make filldir_t take a 64-bit inode number and struct kstat carry a 64-bit
inode number so that 64-bit inode numbers can be passed back to userspace.

The stat functions then returns the full 64-bit inode number where
available and where possible.  If it is not possible to represent the inode
number supplied by the filesystem in the field provided by userspace, then
error EOVERFLOW will be issued.

Similarly, the getdents/readdir functions now pass the full 64-bit inode
number to userspace where possible, returning EOVERFLOW instead when a
directory entry is encountered that can't be properly represented.

Note that this means that some inodes will not be stat'able on a 32-bit
system with old libraries where they were before - but it does mean that
there will be no ambiguity over what a 32-bit inode number refers to.

Note similarly that directory scans may be cut short with an error on a
32-bit system with old libraries where the scan would work before for the
same reasons.

It is judged unlikely that this situation will occur because modern glibc
uses 64-bit capable versions of stat and getdents class functions
exclusively, and that older systems are unlikely to encounter
unrepresentable inode numbers anyway.

[akpm: alpha build fix]
Signed-off-by: David Howells <dhowells@redhat.com>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 08:03:40 -07:00
Linus Torvalds
12dce6263d Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus:
  [MIPS] Remove unused galileo-boars header files
  [MIPS] Rename SERIAL_PORT_DEFNS for EV64120
  [MIPS] Add UART IRQ number for EV64120
  [MIPS] Remove excite_flash.c
  [MIPS] Update i8259 resources.
  [MIPS] Make unwind_stack() can dig into interrupted context
  [MIPS] Stacktrace build-fix and improvement
  [MIPS] QEMU: Add support for little endian mips
  [MIPS] Remove __flush_icache_page
  [MIPS] lockdep: update defconfigs
  [MIPS] lockdep: Add STACKTRACE_SUPPORT and enable LOCKDEP_SUPPORT
  [MIPS] lockdep: fix TRACE_IRQFLAGS_SUPPORT
2006-10-02 08:18:43 -07:00
David Howells
3f2e05e90e [PATCH] BLOCK: Revert patch to hack around undeclared sigset_t in linux/compat.h
Revert Andrew Morton's patch to temporarily hack around the lack of a
declaration of sigset_t in linux/compat.h to make the block-disablement
patches build on IA64.  This got accidentally pushed to Linus and should
be fixed in a different manner.

Also make linux/compat.h #include asm/signal.h to gain a definition of
sigset_t so that it can externally declare sigset_from_compat().

This has been compile-tested for i386, x86_64, ia64, mips, mips64, frv, ppc and
ppc64 and run-tested on frv.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-02 08:03:31 -07:00
Cedric Le Goater
9ec52099e4 [PATCH] replace cad_pid by a struct pid
There are a few places in the kernel where the init task is signaled.  The
ctrl+alt+del sequence is one them.  It kills a task, usually init, using a
cached pid (cad_pid).

This patch replaces the pid_t by a struct pid to avoid pid wrap around
problem.  The struct pid is initialized at boot time in init() and can be
modified through systctl with

	/proc/sys/kernel/cad_pid

[ I haven't found any distro using it ? ]

It also introduces a small helper routine kill_cad_pid() which is used
where it seemed ok to use cad_pid instead of pid 1.

[akpm@osdl.org: cleanups, build fix]
Signed-off-by: Cedric Le Goater <clg@fr.ibm.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-02 07:57:25 -07:00
Arnd Bergmann
fe74290d51 [PATCH] provide kernel_execve on all architectures
This adds the new kernel_execve function on all architectures that were using
_syscall3() to implement execve.

The implementation uses code from the _syscall3 macros provided in the
unistd.h header file.  I don't have cross-compilers for any of these
architectures, so the patch is untested with the exception of i386.

Most architectures can probably implement this in a nicer way in assembly or
by combining it with the sys_execve implementation itself, but this should do
it for now.

[bunk@stusta.de: m68knommu build fix]
[markh@osdl.org: build fix]
[bero@arklinux.org: build fix]
[ralf@linux-mips.org: mips fix]
[schwidefsky@de.ibm.com: s390 fix]
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Andi Kleen <ak@muc.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Ian Molton <spyro@f2s.com>
Cc: Mikael Starvik <starvik@axis.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Hirokazu Takata <takata.hirokazu@renesas.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Kazumoto Kojima <kkojima@rr.iij4u.or.jp>
Cc: Richard Curnow <rc@rc0.org.uk>
Cc: William Lee Irwin III <wli@holomorphy.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Cc: Miles Bader <uclinux-v850@lsi.nec.co.jp>
Cc: Chris Zankel <chris@zankel.net>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Bernhard Rosenkraenzer <bero@arklinux.org>
Signed-off-by: Mark Haverkamp <markh@osdl.org>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-02 07:57:23 -07:00
Serge E. Hallyn
e9ff3990f0 [PATCH] namespaces: utsname: switch to using uts namespaces
Replace references to system_utsname to the per-process uts namespace
where appropriate.  This includes things like uname.

Changes: Per Eric Biederman's comments, use the per-process uts namespace
	for ELF_PLATFORM, sunrpc, and parts of net/ipv4/ipconfig.c

[jdike@addtoit.com: UML fix]
[clg@fr.ibm.com: cleanup]
[akpm@osdl.org: build fix]
Signed-off-by: Serge E. Hallyn <serue@us.ibm.com>
Cc: Kirill Korotaev <dev@openvz.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Herbert Poetzl <herbert@13thfloor.at>
Cc: Andrey Savochkin <saw@sw.ru>
Signed-off-by: Cedric Le Goater <clg@fr.ibm.com>
Cc: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-02 07:57:21 -07:00
Serge E. Hallyn
0437eb594e [PATCH] nsproxy: move init_nsproxy into kernel/nsproxy.c
Move the init_nsproxy definition out of arch/ into kernel/nsproxy.c.  This
avoids all arches having to be updated.  Compiles and boots on s390.

Signed-off-by: Serge E. Hallyn <serue@us.ibm.com>
Cc: Kirill Korotaev <dev@openvz.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Herbert Poetzl <herbert@13thfloor.at>
Cc: Andrey Savochkin <saw@sw.ru>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-02 07:57:20 -07:00
Serge E. Hallyn
ab516013ad [PATCH] namespaces: add nsproxy
This patch adds a nsproxy structure to the task struct.  Later patches will
move the fs namespace pointer into this structure, and introduce a new utsname
namespace into the nsproxy.

The vserver and openvz functionality, then, would be implemented in large part
by virtualizing/isolating more and more resources into namespaces, each
contained in the nsproxy.

[akpm@osdl.org: build fix]
Signed-off-by: Serge Hallyn <serue@us.ibm.com>
Cc: Kirill Korotaev <dev@openvz.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Herbert Poetzl <herbert@13thfloor.at>
Cc: Andrey Savochkin <saw@sw.ru>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-02 07:57:20 -07:00
Yoichi Yuasa
b00f3774f2 [MIPS] Remove excite_flash.c
excite_flashtest.c is unused.

Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-10-01 23:16:59 +01:00