Commit Graph

4584 Commits

Author SHA1 Message Date
David S. Miller
198d6ba4d7 Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Conflicts:

	drivers/isdn/i4l/isdn_net.c
	fs/cifs/connect.c
2008-11-18 23:38:23 -08:00
Miquel van Smoorenburg
df81d2371a [SCSI] dpt_i2o: fix transferred data length for scsi_set_resid()
dpt_i2o.c::adpt_i2o_to_scsi() reads the value at (reply+5) which
should contain the length in bytes of the transferred data. This
would be correct if reply was a u32 *. However it is a void * here,
so we need to read the value at (reply+20) instead.

The value at (reply+5) is usually 0xff0000, which is apparently
'large enough' and didn't cause any trouble until 2.6.27 where

commit 427e59f09f
Author: James Bottomley <James.Bottomley@HansenPartnership.com>
Date:   Sat Mar 8 18:24:17 2008 -0600

    [SCSI] make use of the residue value

caused this to become visible through e.g. iostat -x .

Signed-off-by: Miquel van Smoorenburg <mikevs@xs4all.net>
Cc: Stable Tree <stable@kernel.org>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-11-15 11:10:14 -06:00
David S. Miller
9eeda9abd1 Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Conflicts:

	drivers/net/wireless/ath5k/base.c
	net/8021q/vlan_core.c
2008-11-06 22:43:03 -08:00
Mike Christie
939c2288c3 [SCSI] scsi_error regression: Fix idempotent command handling
Drivers want to be able to return DID_TRANSPORT_DISRUPTED and
have it do the right thing for commands like tape and passthrouh
as far as retries go. The LLDs previously used DID_BUS_BUSY or DID_ERROR
which followed the cmd->retries limit, but DID_TRANSPORT_DISRUPTED
was skipping that check so it could have caused a problem with tape
commands.

This patch has DID_TRANSPORT_DISRUPTED check the cmd->retries/cmd->allowed.

Signed-off-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-11-05 12:48:23 -05:00
Andrew Vasquez
3869a17288 [SCSI] qla2xxx: Update version number to 8.02.01-k9.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-11-05 12:42:29 -05:00
Michael Reed
5bff55db3d [SCSI] qla2xxx: Return a FAILED status when abort mailbox-command fails.
Mike Reed noted
(https://bugzilla.novell.com/show_bug.cgi?id=421330) that the
driver was incorrectly returning a SUCCESS status if the driver's
request to the firmware to abort a command failed.  By doing so,
the mid-layer believed, incorrectly, that the command has
completed and has been returned (ultimately clearing
scsi_cmnd.request_buffer) yet the driver still has the command.
What should correctly happen is a mid-layer escalation
(device-reset, etc.) of recovery during which the driver will
eventually return the outstanding commands to the mid-layer.

Cc: Stable Tree <stable@kernel.org>
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-11-05 12:42:12 -05:00
Shyam Sundar
680d7db88a [SCSI] qla2xxx: Do not honour max_vports from firmware for 2G ISPs and below.
For 23XX ISPs, max_vports may return an invalid value.
Do not honour it.

Cc: Stable Tree <stable@kernel.org>
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-11-05 12:41:49 -05:00
Andrew Vasquez
737faece27 [SCSI] qla2xxx: Use pci_disable_rom() to manipulate PCI config space.
http://bugzilla.kernel.org/show_bug.cgi?id=9422

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-11-05 12:41:28 -05:00
Lalit Chandivade
821b399600 [SCSI] qla2xxx: Correct Atmel flash-part handling.
Use correct block size (4K) for erase command 0x20 for Atmel
Flash. Use dword addresses for determining sector boundary.

Cc: Stable Tree <stable@kernel.org>
Signed-off-by: Lalit Chandivade <lalit.chandivade@qlogic.com>
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-11-05 12:41:06 -05:00
FUJITA Tomonori
6b0eea21ef [SCSI] megaraid: fix mega_internal_command oops
scsi_cmnd->cmnd was changed from a static array to a pointer post
2.6.25. It breaks mega_internal_command():

static int
mega_internal_command(adapter_t *adapter, megacmd_t *mc, mega_passthru *pthru)
{
...
	scb = &adapter->int_scb;
	memset(scb, 0, sizeof(scb_t));

	scmd = &adapter->int_scmd;
	memset(scmd, 0, sizeof(Scsi_Cmnd));

	sdev = kzalloc(sizeof(struct scsi_device), GFP_KERNEL);
	scmd->device = sdev;

	scmd->device->host = adapter->host;
	scmd->host_scribble = (void *)scb;
	scmd->cmnd[0] = MEGA_INTERNAL_CMD;

mega_internal_command() uses scsi_cmnd allocated internally so
scmd->cmnd is NULL here. This patch adds a static array for cdb to
adapter_t and uses it here. This also uses
scsi_allocate_command/scsi_free_command, the recommended way to
allocate struct scsi_cmnd since the driver might use sense_buffer in
struct scsi_cmnd.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Reviewed-by: Boaz Harrosh <bharrosh@panasas.com>
Tested-by: Pascal Terjan <pterjan@gmail.com>
Reported-by: Pascal Terjan <pterjan@gmail.com>
Acked-by: "Yang, Bo" <Bo.Yang@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-11-05 12:40:23 -05:00
Al Viro
233e70f422 saner FASYNC handling on file close
As it is, all instances of ->release() for files that have ->fasync()
need to remember to evict file from fasync lists; forgetting that
creates a hole and we actually have a bunch that *does* forget.

So let's keep our lives simple - let __fput() check FASYNC in
file->f_flags and call ->fasync() there if it's been set.  And lose that
crap in ->release() instances - leaving it there is still valid, but we
don't have to bother anymore.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-11-01 09:49:46 -07:00
Harvey Harrison
63779436ab drivers: replace NIPQUAD()
Using NIPQUAD() with NIPQUAD_FMT, %d.%d.%d.%d or %u.%u.%u.%u
can be replaced with %pI4

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-31 00:56:00 -07:00
David S. Miller
a1744d3bee Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Conflicts:

	drivers/net/wireless/p54/p54common.c
2008-10-31 00:17:34 -07:00
Linus Torvalds
c732acd960 Merge git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6:
  fdomain_cs: Sort out modules with duplicate description
  pcmcia: Whine harder about use of EXCLUSIVE
  pcmcia: IRQ_TYPE_EXCLUSIVE is long obsoleted
2008-10-30 12:52:53 -07:00
Harvey Harrison
5b095d9892 net: replace %p6 with %pI6
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-29 12:52:50 -07:00
Harvey Harrison
1afa67f5e7 misc: replace NIP6_FMT with %p6 format specifier
The iscsi_ibft.c changes are almost certainly a bugfix as the
pointer 'ip' is a u8 *, so they never print the last 8 bytes
of the IPv6 address, and the eight bytes they do print have
a zero byte with them in each 16-bit word.

Other than that, this should cause no difference in functionality.

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-28 16:06:44 -07:00
Linus Torvalds
f8aea20018 Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (21 commits)
  [SCSI] sd: fix computation of the full size of the device
  [SCSI] lib: string_get_size(): don't hang on zero; no decimals on exact
  [SCSI] sun3x_esp: Convert && to ||
  [SCSI] sd: remove command-size switching code
  [SCSI] 3w-9xxx: remove unnecessary local_irq_save/restore for scsi sg copy API
  [SCSI] 3w-xxxx: remove unnecessary local_irq_save/restore for scsi sg copy API
  [SCSI] fix netlink kernel-doc
  [SCSI] sd: Fix handling of NO_SENSE check condition
  [SCSI] export busy state via q->lld_busy_fn()
  [SCSI] refactor sdev/starget/shost busy checking
  [SCSI] mptfusion: Increase scsi-timeouts, similariy to the LSI 4.x driver.
  [SCSI] aic7xxx: Take the LED out of diagnostic mode on PM resume
  [SCSI] aic79xx: user visible misuse wrong SI units (not disk size!)
  [SCSI] ipr: use memory_read_from_buffer()
  [SCSI] aic79xx: fix shadowed variables
  [SCSI] aic79xx: fix shadowed variables, add statics
  [SCSI] aic7xxx: update *_shipped files
  [SCSI] aic7xxx: update .reg files
  [SCSI] aic7xxx: introduce "dont_generate_debug_code" keyword in aicasm parser
  [SCSI] scsi_dh: Initialize path state to be passive when path is not owned
  ...
2008-10-23 13:02:03 -07:00
H. Peter Anvin
520a2c2741 [SCSI] sd: fix computation of the full size of the device
When computing the full size of the device, we need to cast
sdkp->capacity before shifting, since in some configurations sector_t
can be a 32-bit number.

Also, change ffz(~x) to the more idiomatic ilog2(x).

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-10-23 11:42:20 -05:00
Julia Lawall
3fe68cc152 [SCSI] sun3x_esp: Convert && to ||
The pattern !E && !E->fld is nonsensical.  The patch below updates this
according to the assumption that && should be ||.  But perhaps another
solution was intended.

The semantic patch that makes this change is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@disable and_comm@
expression E;
identifier fld;
@@

- !E && !E->fld
+ !E || !E->fld
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Acked-By: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-10-23 11:42:19 -05:00
Alan Stern
d4c9b73608 [SCSI] sd: remove command-size switching code
This patch (as1138) removes from sd.c some old code for switching from
10-byte commands to 6-byte commands.  This code is redundant -- the
switching for READ and WRITE is already handled in
scsi_io_completion() and the switching for MODE SENSE is already
handled in scsi_mode_sense().  (There is no comparable switch for MODE
SELECT, but I doubt one is needed.)

Furthermore the other handlers do a better job; they check for
appropriate ASC and ASCQ values before blindly switching the size.
The code in sd.c is known to cause problems with some devices by
switching when it shouldn't.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-10-23 11:42:19 -05:00
FUJITA Tomonori
36a529202b [SCSI] 3w-9xxx: remove unnecessary local_irq_save/restore for scsi sg copy API
Since the commit 50bed2e286 (sg: disable
interrupts inside sg_copy_buffer), no need to disable interrupts
before calling scsi_sg_copy_from_buffer. So we can simplify
twa_scsiop_execute_scsi_complete() a bit, which disables interrupts
just for scsi_sg_copy_from_buffer.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: Adam Radford <linuxraid@amcc.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-10-23 11:42:18 -05:00
FUJITA Tomonori
0723d4a806 [SCSI] 3w-xxxx: remove unnecessary local_irq_save/restore for scsi sg copy API
Since the commit 50bed2e286 (sg: disable
interrupts inside sg_copy_buffer), no need to disable interrupts
before calling scsi_sg_copy_from_buffer. So we can simplify
tw_transfer_internal, which disables interrupts just for
scsi_sg_copy_from_buffer.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>\
Acked-by: Adam Radford <linuxraid@amcc.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-10-23 11:42:17 -05:00
Randy Dunlap
aa198bf1da [SCSI] fix netlink kernel-doc
Fix kernel-doc warning: the function short description must be on one
line and the previous comment is not kernel-doc but it was confusing
scripts/kernel-doc.

Warning(lin2627-g3-kdocfixes//drivers/scsi/scsi_netlink.c:221): No description found for parameter 'skb'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-10-23 11:42:17 -05:00
Jamie Wellnitz
10dab22664 [SCSI] sd: Fix handling of NO_SENSE check condition
The current handling of NO_SENSE check condition is the same as
RECOVERED_ERROR, and assumes that in both cases, the I/O was fully
transferred.

We have seen cases of arrays returning with NO_SENSE (no error), but
the I/O was not completely transferred, thus residual set.  Thus,
rather than return good_bytes as the entire transfer, set good_bytes
to 0, so that the midlayer then applies the residual in calculating
the transfer, and for sd, will fail the I/O and fall into a retry
path.

Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-10-23 11:42:17 -05:00
Kiyoshi Ueda
6c5121b78b [SCSI] export busy state via q->lld_busy_fn()
This patch implements q->lld_busy_fn() for scsi mid layer to export
its busy state for request stacking drivers.

For efficiency, no lock is taken to check the busy state of
shost/starget/sdev, since the returned value is not guaranteed and
may be changed after request stacking drivers call the function,
regardless of taking lock or not.

When scsi can't dispatch I/Os anymore and needs to kill I/Os
(e.g. !sdev), scsi needs to return 'not busy'.
Otherwise, request stacking drivers may hold requests forever.

Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com>
Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-10-23 11:42:16 -05:00
Kiyoshi Ueda
9d11251709 [SCSI] refactor sdev/starget/shost busy checking
This patch refactors the busy checking codes of scsi_device,
Scsi_Host and scsi_target.  There should be no functional change.

This is a preparation for another patch which exports scsi's busy
state to the block layer for request stacking drivers.

Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com>
Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-10-23 11:42:16 -05:00
thomas schorpp
7583221f60 [SCSI] aic7xxx: Take the LED out of diagnostic mode on PM resume
Take the Diag/Activity-LED of the HBA out of diagnostic mode on PM
resume after successful PM resume from standby and HBA restart, it
remained always on before. If something fails before complete
recovery, it should remain on, since it is a diagnostics LED, reason
for the used higher layer for the clear.

Signed-off-by: thomas.schorpp@gmail.com
Acked-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-10-23 11:42:16 -05:00
Alan Cox
d91ab4e7df [SCSI] aic79xx: user visible misuse wrong SI units (not disk size!)
MHZ not Mhz for SI unit pedants

Closes bug #6422

Signed-off-by: Alan Cox <alan@redhat.com>
Acked-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-10-23 11:42:15 -05:00
Akinobu Mita
d777aaf386 [SCSI] ipr: use memory_read_from_buffer()
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Brian King <brking@us.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-10-23 11:42:15 -05:00
Harvey Harrison
3ba7f18cd9 [SCSI] aic79xx: fix shadowed variables
OK to just reuse the outer declaration as it is never used again.
drivers/scsi/aic7xxx/aic79xx_pci.c:340:12: warning: symbol 'devconfig' shadows an earlier one
drivers/scsi/aic7xxx/aic79xx_pci.c:299:12: originally declared here

targpcistat is always assigned just before use, remove the inner declaration.
drivers/scsi/aic7xxx/aic79xx_pci.c:486:9: warning: symbol 'targpcistat' shadows an earlier one
drivers/scsi/aic7xxx/aic79xx_pci.c:429:9: originally declared here

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-10-23 11:42:15 -05:00
Harvey Harrison
678e80a32f [SCSI] aic79xx: fix shadowed variables, add statics
Redeclared within different if/else blocks, safe to reuse the
original from beginning of function.
drivers/scsi/aic7xxx/aic79xx_core.c:2475:10: warning: symbol 'scbid' shadows an earlier one
drivers/scsi/aic7xxx/aic79xx_core.c:2399:10: originally declared here
drivers/scsi/aic7xxx/aic79xx_core.c:2586:10: warning: symbol 'scbid' shadows an earlier one
drivers/scsi/aic7xxx/aic79xx_core.c:2399:10: originally declared here
drivers/scsi/aic7xxx/aic79xx_core.c:2587:15: warning: symbol 'scb' shadows an earlier one
drivers/scsi/aic7xxx/aic79xx_core.c:2393:13: originally declared here

Use caminfo for the outer declaration, the redeclared version is
iterating over all initiator/target pairs (devices) which.
drivers/scsi/aic7xxx/aic79xx_core.c:8857:23: warning: symbol 'devinfo' shadows an earlier one
drivers/scsi/aic7xxx/aic79xx_core.c:8711:21: originally declared here

Forward declaration was already marked static, make the definition match.
drivers/scsi/aic7xxx/aic79xx_core.c:3693:1: warning: symbol 'ahd_devlimited_syncrate' was not declared. Should it be static?

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-10-23 11:42:13 -05:00
Denys Vlasenko
060ae855a8 [SCSI] aic7xxx: update *_shipped files
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-10-23 11:42:12 -05:00
Denys Vlasenko
7b61ab89f9 [SCSI] aic7xxx: update .reg files
Update .reg files, marking unused registers with dont_generate_debug_code.
Comment explains how to use it.

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-10-23 11:42:12 -05:00
Denys Vlasenko
fa25b99a50 [SCSI] aic7xxx: introduce "dont_generate_debug_code" keyword in aicasm parser
aic7xxx still contains ~30kb of dead code if pretty printing of registers
is requested. These patches deal with it.

Size differences:

   text    data     bss     dec     hex filename
DEBUG_ENABLE+PRETTY_PRINT:
 234697    2362    1188  238247   3a2a7 linux-2.6.26-rc8-/drivers/scsi/aic7xxx/built-in.o
 205092    2362    1188  208642   32f02 linux-2.6.26-rc8/drivers/scsi/aic7xxx/built-in.o
NO_DEBUG_ENABLE+PRETTY_PRINT:
 227272    2362    1172  230806   38596 linux-2.6.26-rc8-/drivers/scsi/aic7xxx/built-in.o
 197671    2362    1172  201205   311f5 linux-2.6.26-rc8/drivers/scsi/aic7xxx/built-in.o
DEBUG_ENABLE+NO_PRETTY_PRINT:
 192457    2362    1188  196007   2fda7 linux-2.6.26-rc8-/drivers/scsi/aic7xxx/built-in.o
 192457    2362    1188  196007   2fda7 linux-2.6.26-rc8/drivers/scsi/aic7xxx/built-in.o
NO_DEBUG_ENABLE+NO_PRETTY_PRINT:
 185040    2362    1172  188574   2e09e linux-2.6.26-rc8-/drivers/scsi/aic7xxx/built-in.o
 185040    2362    1172  188574   2e09e linux-2.6.26-rc8/drivers/scsi/aic7xxx/built-in.o

This patch:

Introduce "dont_generate_debug_code" keyword in aicasm parser.

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-10-23 11:42:12 -05:00
Chandra Seetharaman
5a36756b8b [SCSI] scsi_dh: Initialize path state to be passive when path is not owned
Set the path state to be passive when we learn that the controller does
not own the path to the LUN.

This will avoid sending even a single i/o thru the passive path at the
probe time.

Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-10-23 11:42:11 -05:00
James Bottomley
32c356d76d [SCSI] fix removable device inability to detect disk changes
On Tue, 12 Aug 2008 15:08:14 +0200
Giuliano Pochini <pochini@shiny.it> wrote:

> Fujitsu magneto-optical drive, Adaptec 29160 and
> Linux Jay 2.6.26 #7 SMP Sun Aug 10 18:34:22 CEST 2008 ppc 7455, altivec supported PowerMac3,6 GNU/Linux
>
> When I insert a disk and I mount it, scsi_test_unit_ready() is called and
> the do-while loop gets sshdr->sense_key == UNIT_ATTENTION in the first
> cycle and 0 in the second one. So the if below misses the UNIT_ATTENTION
> and sdev->changed = 1 is not executed. At this point bad things can
> happen... I'm not sure how to fix this. Any clue ?

The problem is essentially caused by us eating UNIT_ATTENTION
conditions in scsi_test_unit_ready().  Fix by updating the ->changed
flag when this happens if the media is removable.

[pochini@shiny.it: updates to tidy up patch]
Signed-off-by: Giuliano Pochini <pochini@shiny.it>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-10-23 11:41:16 -05:00
Al Viro
40cc51be69 [PATCH] switch sr
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-10-21 07:48:50 -04:00
Al Viro
0338e29178 [PATCH] switch sd
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-10-21 07:48:48 -04:00
Al Viro
3e3c9c6f3d [PATCH] switch ide-scsi
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-10-21 07:48:46 -04:00
Al Viro
d4430d62fa [PATCH] beginning of methods conversion
To keep the size of changesets sane we split the switch by drivers;
to keep the damn thing bisectable we do the following:
	1) rename the affected methods, add ones with correct
prototypes, make (few) callers handle both.  That's this changeset.
	2) for each driver convert to new methods.  *ALL* drivers
are converted in this series.
	3) kill the old (renamed) methods.

Note that it _is_ a flagday; all in-tree drivers are converted and by the
end of this series no trace of old methods remain.  The only reason why
we do that this way is to keep the damn thing bisectable and allow per-driver
debugging if anything goes wrong.

New methods:
	open(bdev, mode)
	release(disk, mode)
	ioctl(bdev, mode, cmd, arg)		/* Called without BKL */
	compat_ioctl(bdev, mode, cmd, arg)
	locked_ioctl(bdev, mode, cmd, arg)	/* Called with BKL, legacy */

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-10-21 07:47:32 -04:00
Al Viro
83ff6fe858 [PATCH] don't mess with file in scsi_nonblockable_ioctl()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-10-21 07:47:28 -04:00
Al Viro
bbc1cc9784 [PATCH] switch cdrom_{open,release,ioctl} to sane APIs
... convert to it in callers

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-10-21 07:47:22 -04:00
Al Viro
1bddd9e645 [PATCH] lose the unused file argument in generic_ide_ioctl()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-10-21 07:47:16 -04:00
Al Viro
74f3c8aff3 [PATCH] switch scsi_cmd_ioctl() to passing fmode_t
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-10-21 07:47:14 -04:00
Al Viro
e915e872ed [PATCH] switch sg_scsi_ioctl() to passing fmode_t
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-10-21 07:47:12 -04:00
Al Viro
86d434dede [PATCH] eliminate use of ->f_flags in block methods
store needed information in f_mode

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-10-21 07:47:08 -04:00
Linus Torvalds
a0bfb673dc Merge branch 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6
* 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: (41 commits)
  PCI: fix pci_ioremap_bar() on s390
  PCI: fix AER capability check
  PCI: use pci_find_ext_capability everywhere
  PCI: remove #ifdef DEBUG around dev_dbg call
  PCI hotplug: fix get_##name return value problem
  PCI: document the pcie_aspm kernel parameter
  PCI: introduce an pci_ioremap(pdev, barnr) function
  powerpc/PCI: Add legacy PCI access via sysfs
  PCI: Add ability to mmap legacy_io on some platforms
  PCI: probing debug message uniformization
  PCI: support PCIe ARI capability
  PCI: centralize the capabilities code in probe.c
  PCI: centralize the capabilities code in pci-sysfs.c
  PCI: fix 64-vbit prefetchable memory resource BARs
  PCI: replace cfg space size (256/4096) by macros.
  PCI: use resource_size() everywhere.
  PCI: use same arg names in PCI_VDEVICE comment
  PCI hotplug: rpaphp: make debug var unique
  PCI: use %pF instead of print_fn_descriptor_symbol() in quirks.c
  PCI: fix hotplug get_##name return value problem
  ...
2008-10-20 13:40:47 -07:00
Linus Torvalds
9301975ec2 Merge branch 'genirq-v28-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
This merges branches irq/genirq, irq/sparseirq-v4, timers/hpet-percpu
and x86/uv.

The sparseirq branch is just preliminary groundwork: no sparse IRQs are
actually implemented by this tree anymore - just the new APIs are added
while keeping the old way intact as well (the new APIs map 1:1 to
irq_desc[]).  The 'real' sparse IRQ support will then be a relatively
small patch ontop of this - with a v2.6.29 merge target.

* 'genirq-v28-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (178 commits)
  genirq: improve include files
  intr_remapping: fix typo
  io_apic: make irq_mis_count available on 64-bit too
  genirq: fix name space collisions of nr_irqs in arch/*
  genirq: fix name space collision of nr_irqs in autoprobe.c
  genirq: use iterators for irq_desc loops
  proc: fixup irq iterator
  genirq: add reverse iterator for irq_desc
  x86: move ack_bad_irq() to irq.c
  x86: unify show_interrupts() and proc helpers
  x86: cleanup show_interrupts
  genirq: cleanup the sparseirq modifications
  genirq: remove artifacts from sparseirq removal
  genirq: revert dynarray
  genirq: remove irq_to_desc_alloc
  genirq: remove sparse irq code
  genirq: use inline function for irq_to_desc
  genirq: consolidate nr_irqs and for_each_irq_desc()
  x86: remove sparse irq from Kconfig
  genirq: define nr_irqs for architectures with GENERIC_HARDIRQS=n
  ...
2008-10-20 13:23:01 -07:00
Linus Torvalds
72558dde73 Merge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: (36 commits)
  ide: re-add TRM290 fix lost during ide_build_dmatable() cleanup
  scc_pata: kill unused variables
  sgiioc4: kill duplicate ioremap()
  sgiioc4: kill useless address checks
  delkin_cb: add PM support
  ide: remove broken hpt34x driver
  ide-floppy: remove idefloppy_floppy_t typedef
  sgiioc4: remove maskproc() method
  hpt366: cleanup maskproc() method
  ide: mask interrupt in ide_config_drive_speed()
  hpt366: fix compile warning
  ide: remove unused macros from <asm-parisc/ide.h>
  ide: remove M68K_IDE_SWAPW define from <asm-m68k/ide.h>
  ide: remove dead <asm-arm/arch-sa1100/ide.h>
  ide: fix support for IDE PCI controllers using MMIO on frv
  ide-cd: remove stale comment
  ide-cd: small drive type print fix
  ide-cd: debug log enhancements
  ide: add generic ATA/ATAPI disk driver
  ide: allow device drivers to specify per-device type /proc settings
  ...
2008-10-20 13:12:39 -07:00
Jesse Barnes
0927678f55 PCI: use pci_find_ext_capability everywhere
Remove some open coded (and buggy) versions of pci_find_ext_capability
in favor of the real routine in the PCI core.

Tested-by: Tomasz Czernecki <czernecki@gmail.com>
Acked-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Reviewed-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-10-20 11:01:51 -07:00