Introduce a KVM selftest to verify that userspace manipulation of the
TSC (via the new vCPU attribute) results in the correct behavior within
the guest.
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Oliver Upton <oupton@google.com>
Message-Id: <20210916181555.973085-6-oupton@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
To date, VMM-directed TSC synchronization and migration has been a bit
messy. KVM has some baked-in heuristics around TSC writes to infer if
the VMM is attempting to synchronize. This is problematic, as it depends
on host userspace writing to the guest's TSC within 1 second of the last
write.
A much cleaner approach to configuring the guest's views of the TSC is to
simply migrate the TSC offset for every vCPU. Offsets are idempotent,
and thus not subject to change depending on when the VMM actually
reads/writes values from/to KVM. The VMM can then read the TSC once with
KVM_GET_CLOCK to capture a (realtime, host_tsc) pair at the instant when
the guest is paused.
Cc: David Matlack <dmatlack@google.com>
Cc: Sean Christopherson <seanjc@google.com>
Signed-off-by: Oliver Upton <oupton@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210916181538.968978-8-oupton@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Handling the migration of TSCs correctly is difficult, in part because
Linux does not provide userspace with the ability to retrieve a (TSC,
realtime) clock pair for a single instant in time. In lieu of a more
convenient facility, KVM can report similar information in the kvm_clock
structure.
Provide userspace with a host TSC & realtime pair iff the realtime clock
is based on the TSC. If userspace provides KVM_SET_CLOCK with a valid
realtime value, advance the KVM clock by the amount of elapsed time. Do
not step the KVM clock backwards, though, as it is a monotonic
oscillator.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Oliver Upton <oupton@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210916181538.968978-5-oupton@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Following features are supported by the initial KVM RISC-V support:
1. No RISC-V specific KVM IOCTL
2. Loadable KVM RISC-V module
3. Minimal possible KVM world-switch which touches only GPRs and few CSRs
4. Works on both RV64 and RV32 host
5. Full Guest/VM switch via vcpu_get/vcpu_put infrastructure
6. KVM ONE_REG interface for VCPU register access from KVM user-space
7. Interrupt controller emulation in KVM user-space
8. Timer and IPI emuation in kernel
9. Both Sv39x4 and Sv48x4 supported for RV64 host
10. MMU notifiers supported
11. Generic dirty log supported
12. FP lazy save/restore supported
13. SBI v0.1 emulation for Guest/VM
14. Forward unhandled SBI calls to KVM user-space
15. Hugepage support for Guest/VM
16. IOEVENTFD support for Vhost
-----BEGIN PGP SIGNATURE-----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=MMFv
-----END PGP SIGNATURE-----
Merge tag 'kvm-riscv-5.16-1' of git://github.com/kvm-riscv/linux into HEAD
Initial KVM RISC-V support
Following features are supported by the initial KVM RISC-V support:
1. No RISC-V specific KVM IOCTL
2. Loadable KVM RISC-V module
3. Minimal possible KVM world-switch which touches only GPRs and few CSRs
4. Works on both RV64 and RV32 host
5. Full Guest/VM switch via vcpu_get/vcpu_put infrastructure
6. KVM ONE_REG interface for VCPU register access from KVM user-space
7. Interrupt controller emulation in KVM user-space
8. Timer and IPI emuation in kernel
9. Both Sv39x4 and Sv48x4 supported for RV64 host
10. MMU notifiers supported
11. Generic dirty log supported
12. FP lazy save/restore supported
13. SBI v0.1 emulation for Guest/VM
14. Forward unhandled SBI calls to KVM user-space
15. Hugepage support for Guest/VM
16. IOEVENTFD support for Vhost
Document RISC-V specific parts of the KVM API, such as:
- The interrupt numbers passed to the KVM_INTERRUPT ioctl.
- The states supported by the KVM_{GET,SET}_MP_STATE ioctls.
- The registers supported by the KVM_{GET,SET}_ONE_REG interface
and the encoding of those register ids.
- The exit reason KVM_EXIT_RISCV_SBI for SBI calls forwarded to
userspace tool.
CC: Jonathan Corbet <corbet@lwn.net>
CC: linux-doc@vger.kernel.org
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Acked-by: Palmer Dabbelt <palmerdabbelt@google.com>
KVM_MAX_VCPU_ID is not specifying the highest allowed vcpu-id, but the
number of allowed vcpu-ids. This has already led to confusion, so
rename KVM_MAX_VCPU_ID to KVM_MAX_VCPU_IDS to make its semantics more
clear
Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210913135745.13944-3-jgross@suse.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Page ownership tracking between host EL1 and EL2
- Rely on userspace page tables to create large stage-2 mappings
- Fix incompatibility between pKVM and kmemleak
- Fix the PMU reset state, and improve the performance of the virtual PMU
- Move over to the generic KVM entry code
- Address PSCI reset issues w.r.t. save/restore
- Preliminary rework for the upcoming pKVM fixed feature
- A bunch of MM cleanups
- a vGIC fix for timer spurious interrupts
- Various cleanups
s390:
- enable interpretation of specification exceptions
- fix a vcpu_idx vs vcpu_id mixup
x86:
- fast (lockless) page fault support for the new MMU
- new MMU now the default
- increased maximum allowed VCPU count
- allow inhibit IRQs on KVM_RUN while debugging guests
- let Hyper-V-enabled guests run with virtualized LAPIC as long as they
do not enable the Hyper-V "AutoEOI" feature
- fixes and optimizations for the toggling of AMD AVIC (virtualized LAPIC)
- tuning for the case when two-dimensional paging (EPT/NPT) is disabled
- bugfixes and cleanups, especially with respect to 1) vCPU reset and
2) choosing a paging mode based on CR0/CR4/EFER
- support for 5-level page table on AMD processors
Generic:
- MMU notifier invalidation callbacks do not take mmu_lock unless necessary
- improved caching of LRU kvm_memory_slot
- support for histogram statistics
- add statistics for halt polling and remote TLB flush requests
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmE2CIAUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroMyqwf+Ky2WoThuQ9Ra0r/m8pUTAx5+gsAf
MmG24rNLE+26X0xuBT9Q5+etYYRLrRTWJvo5cgHooz7muAYW6scR+ho5xzvLTAxi
DAuoijkXsSdGoFCp0OMUHiwG3cgY5N7feTEwLPAb2i6xr/l6SZyCP4zcwiiQbJ2s
UUD0i3rEoNQ02/hOEveud/ENxzUli9cmmgHKXR3kNgsJClSf1fcuLnhg+7EGMhK9
+c2V+hde5y0gmEairQWm22MLMRolNZ5NL4kjykiNh2M5q9YvbHe5+f/JmENlNZMT
bsUQT6Ry1ukuJ0V59rZvUw71KknPFzZ3d6HgW4pwytMq6EJKiISHzRbVnQ==
=FCAB
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM updates from Paolo Bonzini:
"ARM:
- Page ownership tracking between host EL1 and EL2
- Rely on userspace page tables to create large stage-2 mappings
- Fix incompatibility between pKVM and kmemleak
- Fix the PMU reset state, and improve the performance of the virtual
PMU
- Move over to the generic KVM entry code
- Address PSCI reset issues w.r.t. save/restore
- Preliminary rework for the upcoming pKVM fixed feature
- A bunch of MM cleanups
- a vGIC fix for timer spurious interrupts
- Various cleanups
s390:
- enable interpretation of specification exceptions
- fix a vcpu_idx vs vcpu_id mixup
x86:
- fast (lockless) page fault support for the new MMU
- new MMU now the default
- increased maximum allowed VCPU count
- allow inhibit IRQs on KVM_RUN while debugging guests
- let Hyper-V-enabled guests run with virtualized LAPIC as long as
they do not enable the Hyper-V "AutoEOI" feature
- fixes and optimizations for the toggling of AMD AVIC (virtualized
LAPIC)
- tuning for the case when two-dimensional paging (EPT/NPT) is
disabled
- bugfixes and cleanups, especially with respect to vCPU reset and
choosing a paging mode based on CR0/CR4/EFER
- support for 5-level page table on AMD processors
Generic:
- MMU notifier invalidation callbacks do not take mmu_lock unless
necessary
- improved caching of LRU kvm_memory_slot
- support for histogram statistics
- add statistics for halt polling and remote TLB flush requests"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (210 commits)
KVM: Drop unused kvm_dirty_gfn_invalid()
KVM: x86: Update vCPU's hv_clock before back to guest when tsc_offset is adjusted
KVM: MMU: mark role_regs and role accessors as maybe unused
KVM: MIPS: Remove a "set but not used" variable
x86/kvm: Don't enable IRQ when IRQ enabled in kvm_wait
KVM: stats: Add VM stat for remote tlb flush requests
KVM: Remove unnecessary export of kvm_{inc,dec}_notifier_count()
KVM: x86/mmu: Move lpage_disallowed_link further "down" in kvm_mmu_page
KVM: x86/mmu: Relocate kvm_mmu_page.tdp_mmu_page for better cache locality
Revert "KVM: x86: mmu: Add guest physical address check in translate_gpa()"
KVM: x86/mmu: Remove unused field mmio_cached in struct kvm_mmu_page
kvm: x86: Increase KVM_SOFT_MAX_VCPUS to 710
kvm: x86: Increase MAX_VCPUS to 1024
kvm: x86: Set KVM_MAX_VCPU_ID to 4*KVM_MAX_VCPUS
KVM: VMX: avoid running vmx_handle_exit_irqoff in case of emulation
KVM: x86/mmu: Don't freak out if pml5_root is NULL on 4-level host
KVM: s390: index kvm->arch.idle_mask by vcpu_idx
KVM: s390: Enable specification exception interpretation
KVM: arm64: Trim guest debug exception handling
KVM: SVM: Add 5-level page table support for SVM
...
- A reworking of PDF generation to yield better results for documents
using CJK fonts in particular.
- A new set of translations into traditional Chinese, a dialect for which
I am assured there is a community of interested readers.
- A lot more regular Chinese translation work as well.
...plus the usual assortment of updates, fixes, typo tweaks, etc.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAmEugrgACgkQF0NaE2wM
fliWWQf/RXf34QkMIe+r77WlTRKc+/6R/cO9VlYPtM9vqreKHZZvGgM1t76aOusb
M5QHwQGoZDzaE1wrv0PPm00HtB0Tw7GfZRUbZ4D+niJD1+gcbDTkTR6NdjOvWWUR
zHX2Sx8KJiNrFDtLtRtlUexM8GD124KZ0A8GF6Hpu3WR3HTFDInTdiylUOmj/4eO
3zUGgrJnUVzkqHLGZzV/kmE4kEHGpxyps2JwGq2iF7362t8R6xH3mEdKKKc1pUpx
lGSxfHs+OPWRsNxVJsdYh8kneIpML8OK6lKda1pzwNj8QhIMz/6tZoutKziHsalI
HkbC3exh+SHak2U6Had303vqkIM7cg==
=2QUy
-----END PGP SIGNATURE-----
Merge tag 'docs-5.15' of git://git.lwn.net/linux
Pull documentation updates from Jonathan Corbet:
"Yet another set of documentation changes:
- A reworking of PDF generation to yield better results for documents
using CJK fonts in particular.
- A new set of translations into traditional Chinese, a dialect for
which I am assured there is a community of interested readers.
- A lot more regular Chinese translation work as well.
... plus the usual assortment of updates, fixes, typo tweaks, etc"
* tag 'docs-5.15' of git://git.lwn.net/linux: (55 commits)
docs: sphinx-requirements: Move sphinx_rtd_theme to top
docs: pdfdocs: Enable language-specific font choice of zh_TW translations
docs: pdfdocs: Teach xeCJK about character classes of quotation marks
docs: pdfdocs: Permit AutoFakeSlant for CJK fonts
docs: pdfdocs: One-half spacing for CJK translations
docs: pdfdocs: Add conf.py local to translations for ascii-art alignment
docs: pdfdocs: Preserve inter-phrase space in Korean translations
docs: pdfdocs: Choose Serif font as CJK mainfont if possible
docs: pdfdocs: Add CJK-language-specific font settings
docs: pdfdocs: Refactor config for CJK document
scripts/kernel-doc: Override -Werror from KCFLAGS with KDOC_WERROR
docs/zh_CN: Add zh_CN/accounting/psi.rst
doc: align Italian translation
Documentation/features/vm: riscv supports THP now
docs/zh_CN: add infiniband user_verbs translation
docs/zh_CN: add infiniband user_mad translation
docs/zh_CN: add infiniband tag_matching translation
docs/zh_CN: add infiniband sysfs translation
docs/zh_CN: add infiniband opa_vnic translation
docs/zh_CN: add infiniband ipoib translation
...
KVM_GUESTDBG_BLOCKIRQ will allow KVM to block all interrupts
while running.
This change is mostly intended for more robust single stepping
of the guest and it has the following benefits when enabled:
* Resuming from a breakpoint is much more reliable.
When resuming execution from a breakpoint, with interrupts enabled,
more often than not, KVM would inject an interrupt and make the CPU
jump immediately to the interrupt handler and eventually return to
the breakpoint, to trigger it again.
From the user point of view it looks like the CPU never executed a
single instruction and in some cases that can even prevent forward
progress, for example, when the breakpoint is placed by an automated
script (e.g lx-symbols), which does something in response to the
breakpoint and then continues the guest automatically.
If the script execution takes enough time for another interrupt to
arrive, the guest will be stuck on the same breakpoint RIP forever.
* Normal single stepping is much more predictable, since it won't
land the debugger into an interrupt handler.
* RFLAGS.TF has less chance to be leaked to the guest:
We set that flag behind the guest's back to do single stepping
but if single step lands us into an interrupt/exception handler
it will be leaked to the guest in the form of being pushed
to the stack.
This doesn't completely eliminate this problem as exceptions
can still happen, but at least this reduces the chances
of this happening.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20210811122927.900604-6-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add documentations for linear and logarithmic histogram statistics.
Signed-off-by: Jing Zhang <jingzhangos@google.com>
Message-Id: <20210802165633.1866976-3-jingzhangos@google.com>
[Small changes to the phrasing. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add yet another spinlock for the TDP MMU and take it when marking indirect
shadow pages unsync. When using the TDP MMU and L1 is running L2(s) with
nested TDP, KVM may encounter shadow pages for the TDP entries managed by
L1 (controlling L2) when handling a TDP MMU page fault. The unsync logic
is not thread safe, e.g. the kvm_mmu_page fields are not atomic, and
misbehaves when a shadow page is marked unsync via a TDP MMU page fault,
which runs with mmu_lock held for read, not write.
Lack of a critical section manifests most visibly as an underflow of
unsync_children in clear_unsync_child_bit() due to unsync_children being
corrupted when multiple CPUs write it without a critical section and
without atomic operations. But underflow is the best case scenario. The
worst case scenario is that unsync_children prematurely hits '0' and
leads to guest memory corruption due to KVM neglecting to properly sync
shadow pages.
Use an entirely new spinlock even though piggybacking tdp_mmu_pages_lock
would functionally be ok. Usurping the lock could degrade performance when
building upper level page tables on different vCPUs, especially since the
unsync flow could hold the lock for a comparatively long time depending on
the number of indirect shadow pages and the depth of the paging tree.
For simplicity, take the lock for all MMUs, even though KVM could fairly
easily know that mmu_lock is held for write. If mmu_lock is held for
write, there cannot be contention for the inner spinlock, and marking
shadow pages unsync across multiple vCPUs will be slow enough that
bouncing the kvm_arch cacheline should be in the noise.
Note, even though L2 could theoretically be given access to its own EPT
entries, a nested MMU must hold mmu_lock for write and thus cannot race
against a TDP MMU page fault. I.e. the additional spinlock only _needs_ to
be taken by the TDP MMU, as opposed to being taken by any MMU for a VM
that is running with the TDP MMU enabled. Holding mmu_lock for read also
prevents the indirect shadow page from being freed. But as above, keep
it simple and always take the lock.
Alternative #1, the TDP MMU could simply pass "false" for can_unsync and
effectively disable unsync behavior for nested TDP. Write protecting leaf
shadow pages is unlikely to noticeably impact traditional L1 VMMs, as such
VMMs typically don't modify TDP entries, but the same may not hold true for
non-standard use cases and/or VMMs that are migrating physical pages (from
L1's perspective).
Alternative #2, the unsync logic could be made thread safe. In theory,
simply converting all relevant kvm_mmu_page fields to atomics and using
atomic bitops for the bitmap would suffice. However, (a) an in-depth audit
would be required, (b) the code churn would be substantial, and (c) legacy
shadow paging would incur additional atomic operations in performance
sensitive paths for no benefit (to legacy shadow paging).
Fixes: a2855afc7e ("KVM: x86/mmu: Allow parallel page faults for the TDP MMU")
Cc: stable@vger.kernel.org
Cc: Ben Gardon <bgardon@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210812181815.3378104-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We would like to avoid taking mmu_lock for .invalidate_range_{start,end}()
notifications that are unrelated to KVM. Because mmu_notifier_count
must be modified while holding mmu_lock for write, and must always
be paired across start->end to stay balanced, lock elision must
happen in both or none. Therefore, in preparation for this change,
this patch prevents memslot updates across range_start() and range_end().
Note, technically flag-only memslot updates could be allowed in parallel,
but stalling a memslot update for a relatively short amount of time is
not a scalability issue, and this is all more than complex enough.
A long note on the locking: a previous version of the patch used an rwsem
to block the memslot update while the MMU notifier run, but this resulted
in the following deadlock involving the pseudo-lock tagged as
"mmu_notifier_invalidate_range_start".
======================================================
WARNING: possible circular locking dependency detected
5.12.0-rc3+ #6 Tainted: G OE
------------------------------------------------------
qemu-system-x86/3069 is trying to acquire lock:
ffffffff9c775ca0 (mmu_notifier_invalidate_range_start){+.+.}-{0:0}, at: __mmu_notifier_invalidate_range_end+0x5/0x190
but task is already holding lock:
ffffaff7410a9160 (&kvm->mmu_notifier_slots_lock){.+.+}-{3:3}, at: kvm_mmu_notifier_invalidate_range_start+0x36d/0x4f0 [kvm]
which lock already depends on the new lock.
This corresponds to the following MMU notifier logic:
invalidate_range_start
take pseudo lock
down_read() (*)
release pseudo lock
invalidate_range_end
take pseudo lock (**)
up_read()
release pseudo lock
At point (*) we take the mmu_notifiers_slots_lock inside the pseudo lock;
at point (**) we take the pseudo lock inside the mmu_notifiers_slots_lock.
This could cause a deadlock (ignoring for a second that the pseudo lock
is not a lock):
- invalidate_range_start waits on down_read(), because the rwsem is
held by install_new_memslots
- install_new_memslots waits on down_write(), because the rwsem is
held till (another) invalidate_range_end finishes
- invalidate_range_end sits waits on the pseudo lock, held by
invalidate_range_start.
Removing the fairness of the rwsem breaks the cycle (in lockdep terms,
it would change the *shared* rwsem readers into *shared recursive*
readers), so open-code the wait using a readers count and a
spinlock. This also allows handling blockable and non-blockable
critical section in the same way.
Losing the rwsem fairness does theoretically allow MMU notifiers to
block install_new_memslots forever. Note that mm/mmu_notifier.c's own
retry scheme in mmu_interval_read_begin also uses wait/wake_up
and is likewise not fair.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The conversion tools used during DocBook/LaTeX/html/Markdown->ReST
conversion and some cut-and-pasted text contain some characters that
aren't easily reachable on standard keyboards and/or could cause
troubles when parsed by the documentation build system.
Replace the occurences of the following characters:
- U+00a0 (' '): NO-BREAK SPACE
as it can cause lines being truncated on PDF output
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Message-Id: <ff70cb42d63f3a1da66af1b21b8d038418ed5189.1626947264.git.mchehab+huawei@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
'KVM_CAP_ENFORCE_PV_CPUID' doesn't match the define in
include/uapi/linux/kvm.h.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210722092628.236474-1-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The conversion tools used during DocBook/LaTeX/html/Markdown->ReST
conversion and some cut-and-pasted text contain some characters that
aren't easily reachable on standard keyboards and/or could cause
troubles when parsed by the documentation build system.
Replace the occurences of the following characters:
- U+00a0 (' '): NO-BREAK SPACE
as it can cause lines being truncated on PDF output
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/ff70cb42d63f3a1da66af1b21b8d038418ed5189.1626947264.git.mchehab+huawei@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Add a '::' so that a code block is interpreted properly and also add a
blank line before the start of a list.
Fixes: fdc09ddd40 ("KVM: stats: Add documentation for binary statistics interface")
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Reviewed-by: Jing Zhang <jingzhangos@google.com>
Link: https://lore.kernel.org/r/20210722100356.635078-4-ciorneiioana@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Fix some small build warnings. The title underline was too short in some
cases and a code block was not indented.
Documentation/virt/kvm/api.rst:7216: WARNING: Title underline too short.
Fixes: 6dba940352 ("KVM: x86: Introduce KVM_GET_SREGS2 / KVM_SET_SREGS2")
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://lore.kernel.org/r/20210722100356.635078-3-ciorneiioana@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
- Some kernel-doc cleanups. That script is still regex onslaught from
hell, but it has gotten a little better.
- Improvements to the checkpatch docs, which are also used by the tool
itself.
- A major update to the pathname lookup documentation.
- Elimination of :doc: markup, since our automarkup magic can create
references from filenames without all the extra noise.
- The flurry of Chinese translation activity continues.
Plus, of course, the usual collection of updates, typo fixes, and warning
fixes.
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAmDZ6pQPHGNvcmJldEBs
d24ubmV0AAoJEBdDWhNsDH5Y9W0IAIpzBZDVsDQ7s5cIjbxEh9Oeh1uRmwuObnQh
xsM5oLuAUSMczf5JX8cdyutWJfdoEF5WHjfbt1otfys+kW9m7z0b1K4xw684Y390
sPk3eYVYLiUAZ4/LVdC47BpAzzgJ5U9iC6+FjOATAYsY40EwruxyZWjmY+SaDOU5
dQPjbpRuNQTFjYE6nZIW0o6jyunrfFaJTS6g2bdDoBDOGKyNOSKEw4XZ442cJ3km
uXoMfSJGslQj6qbGY0YhNeaNQm0ErcQw2K4lS3K4gc7Lht32Fbi1lhaqnTIkgI5f
Rh3X37pb90Ya88uWxldVB2bXUrA+PZA/cJqwNTrgw+niBQl6sKU=
=KDcM
-----END PGP SIGNATURE-----
Merge tag 'docs-5.14' of git://git.lwn.net/linux
Pull documentation updates from Jonathan Corbet:
"This was a reasonably active cycle for documentation; this includes:
- Some kernel-doc cleanups. That script is still regex onslaught from
hell, but it has gotten a little better.
- Improvements to the checkpatch docs, which are also used by the
tool itself.
- A major update to the pathname lookup documentation.
- Elimination of :doc: markup, since our automarkup magic can create
references from filenames without all the extra noise.
- The flurry of Chinese translation activity continues.
Plus, of course, the usual collection of updates, typo fixes, and
warning fixes"
* tag 'docs-5.14' of git://git.lwn.net/linux: (115 commits)
docs: path-lookup: use bare function() rather than literals
docs: path-lookup: update symlink description
docs: path-lookup: update get_link() ->follow_link description
docs: path-lookup: update WALK_GET, WALK_PUT desc
docs: path-lookup: no get_link()
docs: path-lookup: update i_op->put_link and cookie description
docs: path-lookup: i_op->follow_link replaced with i_op->get_link
docs: path-lookup: Add macro name to symlink limit description
docs: path-lookup: remove filename_mountpoint
docs: path-lookup: update do_last() part
docs: path-lookup: update path_mountpoint() part
docs: path-lookup: update path_to_nameidata() part
docs: path-lookup: update follow_managed() part
docs: Makefile: Use CONFIG_SHELL not SHELL
docs: Take a little noise out of the build process
docs: x86: avoid using ReST :doc:`foo` markup
docs: virt: kvm: s390-pv-boot.rst: avoid using ReST :doc:`foo` markup
docs: userspace-api: landlock.rst: avoid using ReST :doc:`foo` markup
docs: trace: ftrace.rst: avoid using ReST :doc:`foo` markup
docs: trace: coresight: coresight.rst: avoid using ReST :doc:`foo` markup
...
- Add MTE support in guests, complete with tag save/restore interface
- Reduce the impact of CMOs by moving them in the page-table code
- Allow device block mappings at stage-2
- Reduce the footprint of the vmemmap in protected mode
- Support the vGIC on dumb systems such as the Apple M1
- Add selftest infrastructure to support multiple configuration
and apply that to PMU/non-PMU setups
- Add selftests for the debug architecture
- The usual crop of PMU fixes
-----BEGIN PGP SIGNATURE-----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=fWBV
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 updates for v5.14.
- Add MTE support in guests, complete with tag save/restore interface
- Reduce the impact of CMOs by moving them in the page-table code
- Allow device block mappings at stage-2
- Reduce the footprint of the vmemmap in protected mode
- Support the vGIC on dumb systems such as the Apple M1
- Add selftest infrastructure to support multiple configuration
and apply that to PMU/non-PMU setups
- Add selftests for the debug architecture
- The usual crop of PMU fixes
Add a fallback mechanism to the in-kernel instruction emulator that
allows userspace the opportunity to process an instruction the emulator
was unable to. When the in-kernel instruction emulator fails to process
an instruction it will either inject a #UD into the guest or exit to
userspace with exit reason KVM_INTERNAL_ERROR. This is because it does
not know how to proceed in an appropriate manner. This feature lets
userspace get involved to see if it can figure out a better path
forward.
Signed-off-by: Aaron Lewis <aaronlewis@google.com>
Reviewed-by: David Edmondson <david.edmondson@oracle.com>
Message-Id: <20210510144834.658457-2-aaronlewis@google.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rename "nxe" to "efer_nx" so that future macro magic can use the pattern
<reg>_<bit> for all CR0, CR4, and EFER bits that included in the role.
Using "efer_nx" also makes it clear that the role bit reflects EFER.NX,
not the NX bit in the corresponding PTE.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210622175739.3610207-25-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Originally, __kvm_sync_page used to check the cr4_pae bit in the role
to avoid zapping 4-byte kvm_mmu_pages when guest page size are 8-byte
or the other way round. However, in commit 47c42e6b41 ("KVM: x86: fix
handling of role.cr4_pae and rename it to 'gpte_size'", 2019-03-28) it
was observed that this did not work for nested EPT, where the page table
size would be 8 bytes even if CR4.PAE=0. (Note that the check still
has to be done for nested *NPT*, so it is not possible to use tdp_enabled
or similar).
Therefore, a hack was introduced to identify nested EPT shadow pages
and unconditionally call __kvm_sync_page() on them. However, it is
possible to do without the hack to identify nested EPT shadow pages:
if EPT is active, there will be no shadow pages in non-EPT format,
and all of them will have gpte_is_8_bytes set to true; we can just
check the MMU role directly, and the test will always be true.
Even for non-EPT shadow MMUs, this test should really always be true
now that __kvm_sync_page() is called if and only if the role is an
exact match (kvm_mmu_get_page()) or is part of the current MMU context
(kvm_mmu_sync_roots()). A future commit will convert the likely-pointless
check into a meaningful WARN to enforce that the mmu_roles of the current
context and the shadow page are compatible.
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210622175739.3610207-11-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Warn userspace that KVM_SET_CPUID{,2} after KVM_RUN "may" cause guest
instability. Initialize last_vmentry_cpu to -1 and use it to detect if
the vCPU has been run at least once when its CPUID model is changed.
KVM does not correctly handle changes to paging related settings in the
guest's vCPU model after KVM_RUN, e.g. MAXPHYADDR, GBPAGES, etc... KVM
could theoretically zap all shadow pages, but actually making that happen
is a mess due to lock inversion (vcpu->mutex is held). And even then,
updating paging settings on the fly would only work if all vCPUs are
stopped, updated in concert with identical settings, then restarted.
To support running vCPUs with different vCPU models (that affect paging),
KVM would need to track all relevant information in kvm_mmu_page_role.
Note, that's the _page_ role, not the full mmu_role. Updating mmu_role
isn't sufficient as a vCPU can reuse a shadow page translation that was
created by a vCPU with different settings and thus completely skip the
reserved bit checks (that are tied to CPUID).
Tracking CPUID state in kvm_mmu_page_role is _extremely_ undesirable as
it would require doubling gfn_track from a u16 to a u32, i.e. would
increase KVM's memory footprint by 2 bytes for every 4kb of guest memory.
E.g. MAXPHYADDR (6 bits), GBPAGES, AMD vs. INTEL = 1 bit, and SEV C-BIT
would all need to be tracked.
In practice, there is no remotely sane use case for changing any paging
related CPUID entries on the fly, so just sweep it under the rug (after
yelling at userspace).
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210622175739.3610207-8-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This new API provides a file descriptor for every VM and VCPU to read
KVM statistics data in binary format.
It is meant to provide a lightweight, flexible, scalable and efficient
lock-free solution for user space telemetry applications to pull the
statistics data periodically for large scale systems. The pulling
frequency could be as high as a few times per second.
The statistics descriptors are defined by KVM in kernel and can be
by userspace to discover VM/VCPU statistics during the one-time setup
stage.
The statistics data itself could be read out by userspace telemetry
periodically without any extra parsing or setup effort.
There are a few existed interface protocols and definitions, but no
one can fulfil all the requirements this interface implemented as
below:
1. During high frequency periodic stats reading, there should be no
extra efforts except the stats data read itself.
2. Support stats annotation, like type (cumulative, instantaneous,
peak, histogram, etc) and unit (counter, time, size, cycles, etc).
3. The stats data reading should be free of lock/synchronization. We
don't care about the consistency between all the stats data. All
stats data can not be read out at exactly the same time. We really
care about the change or trend of the stats data. The lock-free
solution is not just for efficiency and scalability, also for the
stats data accuracy and usability. For example, in the situation
that all the stats data readings are protected by a global lock,
if one VCPU died somehow with that lock held, then all stats data
reading would be blocked, then we have no way from stats data that
which VCPU has died.
4. The stats data reading workload can be handed over to other
unprivileged process.
Reviewed-by: David Matlack <dmatlack@google.com>
Reviewed-by: Ricardo Koller <ricarkol@google.com>
Reviewed-by: Krish Sadhukhan <krish.sadhukhan@oracle.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Jing Zhang <jingzhangos@google.com>
Message-Id: <20210618222709.1858088-6-jingzhangos@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that we have H_RPT_INVALIDATE fully implemented, enable
support for the same via KVM_CAP_PPC_RPT_INVALIDATE KVM capability
Signed-off-by: Bharata B Rao <bharata@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210621085003.904767-6-bharata@linux.ibm.com
A new capability (KVM_CAP_ARM_MTE) identifies that the kernel supports
granting a guest access to the tags, and provides a mechanism for the
VMM to enable it.
A new ioctl (KVM_ARM_MTE_COPY_TAGS) provides a simple way for a VMM to
access the tags of a guest without having to maintain a PROT_MTE mapping
in userspace. The above capability gates access to the ioctl.
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210621111716.37157-7-steven.price@arm.com
This hypercall is used by the SEV guest to notify a change in the page
encryption status to the hypervisor. The hypercall should be invoked
only when the encryption attribute is changed from encrypted -> decrypted
and vice versa. By default all guest pages are considered encrypted.
The hypercall exits to userspace to manage the guest shared regions and
integrate with the userspace VMM's migration code.
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: x86@kernel.org
Cc: kvm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Reviewed-by: Steve Rutherford <srutherford@google.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Co-developed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Co-developed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <90778988e1ee01926ff9cac447aacb745f954c8c.1623174621.git.ashish.kalra@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This is a new version of KVM_GET_SREGS / KVM_SET_SREGS.
It has the following changes:
* Has flags for future extensions
* Has vcpu's PDPTRs, allowing to save/restore them on migration.
* Lacks obsolete interrupt bitmap (done now via KVM_SET_VCPU_EVENTS)
New capability, KVM_CAP_SREGS2 is added to signal
the userspace of this ioctl.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20210607090203.133058-8-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Modeled after KVM_CAP_ENFORCE_PV_FEATURE_CPUID, the new capability allows
for limiting Hyper-V features to those exposed to the guest in Hyper-V
CPUIDs (0x40000003, 0x40000004, ...).
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210521095204.2161214-3-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a new lock to protect the arch-specific fields of memslots if they
need to be modified in a kvm->srcu read critical section. A future
commit will use this lock to lazily allocate memslot rmaps for x86.
Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20210518173414.450044-5-bgardon@google.com>
[Add Documentation/ hunk. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When computing the access permissions of a shadow page, use the effective
permissions of the walk up to that point, i.e. the logic AND of its parents'
permissions. Two guest PxE entries that point at the same table gfn need to
be shadowed with different shadow pages if their parents' permissions are
different. KVM currently uses the effective permissions of the last
non-leaf entry for all non-leaf entries. Because all non-leaf SPTEs have
full ("uwx") permissions, and the effective permissions are recorded only
in role.access and merged into the leaves, this can lead to incorrect
reuse of a shadow page and eventually to a missing guest protection page
fault.
For example, here is a shared pagetable:
pgd[] pud[] pmd[] virtual address pointers
/->pmd1(u--)->pte1(uw-)->page1 <- ptr1 (u--)
/->pud1(uw-)--->pmd2(uw-)->pte2(uw-)->page2 <- ptr2 (uw-)
pgd-| (shared pmd[] as above)
\->pud2(u--)--->pmd1(u--)->pte1(uw-)->page1 <- ptr3 (u--)
\->pmd2(uw-)->pte2(uw-)->page2 <- ptr4 (u--)
pud1 and pud2 point to the same pmd table, so:
- ptr1 and ptr3 points to the same page.
- ptr2 and ptr4 points to the same page.
(pud1 and pud2 here are pud entries, while pmd1 and pmd2 here are pmd entries)
- First, the guest reads from ptr1 first and KVM prepares a shadow
page table with role.access=u--, from ptr1's pud1 and ptr1's pmd1.
"u--" comes from the effective permissions of pgd, pud1 and
pmd1, which are stored in pt->access. "u--" is used also to get
the pagetable for pud1, instead of "uw-".
- Then the guest writes to ptr2 and KVM reuses pud1 which is present.
The hypervisor set up a shadow page for ptr2 with pt->access is "uw-"
even though the pud1 pmd (because of the incorrect argument to
kvm_mmu_get_page in the previous step) has role.access="u--".
- Then the guest reads from ptr3. The hypervisor reuses pud1's
shadow pmd for pud2, because both use "u--" for their permissions.
Thus, the shadow pmd already includes entries for both pmd1 and pmd2.
- At last, the guest writes to ptr4. This causes no vmexit or pagefault,
because pud1's shadow page structures included an "uw-" page even though
its role.access was "u--".
Any kind of shared pagetable might have the similar problem when in
virtual machine without TDP enabled if the permissions are different
from different ancestors.
In order to fix the problem, we change pt->access to be an array, and
any access in it will not include permissions ANDed from child ptes.
The test code is: https://lore.kernel.org/kvm/20210603050537.19605-1-jiangshanlai@gmail.com/
Remember to test it with TDP disabled.
The problem had existed long before the commit 41074d07c7 ("KVM: MMU:
Fix inherited permissions for emulated guest pte updates"), and it
is hard to find which is the culprit. So there is no fixes tag here.
Signed-off-by: Lai Jiangshan <laijs@linux.alibaba.com>
Message-Id: <20210603052455.21023-1-jiangshanlai@gmail.com>
Cc: stable@vger.kernel.org
Fixes: cea0f0e7ea ("[PATCH] KVM: MMU: Shadow page table caching")
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* Another state update on exit to userspace fix
* Prevent the creation of mixed 32/64 VMs
* Fix regression with irqbypass not restarting the guest on failed connect
* Fix regression with debug register decoding resulting in overlapping access
* Commit exception state on exit to usrspace
* Fix the MMU notifier return values
* Add missing 'static' qualifiers in the new host stage-2 code
x86 fixes:
* fix guest missed wakeup with assigned devices
* fix WARN reported by syzkaller
* do not use BIT() in UAPI headers
* make the kvm_amd.avic parameter bool
PPC fixes:
* make halt polling heuristics consistent with other architectures
selftests:
* various fixes
* new performance selftest memslot_perf_test
* test UFFD minor faults in demand_paging_test
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmCyF0MUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroOHSgf/Q4Hm5e12Bj2xJy6A+iShnrbbT8PW
hcIIOA7zGWXfjVYcBV7anbj7CcpzfIz0otcRBABa5mkhj+fb3YmPEb0EzCPi4Hru
zxpcpB2w7W7WtUOIKe2EmaT+4Pk6/iLcfr8UMHMqx460akE9OmIg10QNWai3My/3
RIOeakSckBI9e/1TQZbxH66dsLwCT0lLco7i7AWHdFxkzUQyoA34HX5pczOCBsO5
3nXH+/txnRVhqlcyzWLVVGVzFqmpHtBqkIInDOXfUqIoxo/gOhOgF1QdMUEKomxn
5ZFXlL5IXNtr+7yiI67iHX7CWkGZE9oJ04TgPHn6LR6wRnVvc3JInzcB5Q==
=ollO
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fixes from Paolo Bonzini:
"ARM fixes:
- Another state update on exit to userspace fix
- Prevent the creation of mixed 32/64 VMs
- Fix regression with irqbypass not restarting the guest on failed
connect
- Fix regression with debug register decoding resulting in
overlapping access
- Commit exception state on exit to usrspace
- Fix the MMU notifier return values
- Add missing 'static' qualifiers in the new host stage-2 code
x86 fixes:
- fix guest missed wakeup with assigned devices
- fix WARN reported by syzkaller
- do not use BIT() in UAPI headers
- make the kvm_amd.avic parameter bool
PPC fixes:
- make halt polling heuristics consistent with other architectures
selftests:
- various fixes
- new performance selftest memslot_perf_test
- test UFFD minor faults in demand_paging_test"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (44 commits)
selftests: kvm: fix overlapping addresses in memslot_perf_test
KVM: X86: Kill off ctxt->ud
KVM: X86: Fix warning caused by stale emulation context
KVM: X86: Use kvm_get_linear_rip() in single-step and #DB/#BP interception
KVM: x86/mmu: Fix comment mentioning skip_4k
KVM: VMX: update vcpu posted-interrupt descriptor when assigning device
KVM: rename KVM_REQ_PENDING_TIMER to KVM_REQ_UNBLOCK
KVM: x86: add start_assignment hook to kvm_x86_ops
KVM: LAPIC: Narrow the timer latency between wait_lapic_expire and world switch
selftests: kvm: do only 1 memslot_perf_test run by default
KVM: X86: Use _BITUL() macro in UAPI headers
KVM: selftests: add shared hugetlbfs backing source type
KVM: selftests: allow using UFFD minor faults for demand paging
KVM: selftests: create alias mappings when using shared memory
KVM: selftests: add shmem backing source type
KVM: selftests: refactor vm_mem_backing_src_type flags
KVM: selftests: allow different backing source types
KVM: selftests: compute correct demand paging size
KVM: selftests: simplify setup_demand_paging error handling
KVM: selftests: Print a message if /dev/kvm is missing
...
KVM_REQ_UNBLOCK will be used to exit a vcpu from
its inner vcpu halt emulation loop.
Rename KVM_REQ_PENDING_TIMER to KVM_REQ_UNBLOCK, switch
PowerPC to arch specific request bit.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Message-Id: <20210525134321.303768132@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Reorganize SEV code to streamline and simplify future development
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmCg1XQACgkQEsHwGGHe
VUpRKA//dwzDD1QU16JucfhgFlv/9OTm48ukSwAb9lZjDEy4H1CtVL3xEHFd7L3G
LJp0LTW+OQf0/0aGlQp/cP6sBF6G9Bf4mydx70Id4SyCQt8eZDodB+ZOOWbeteWq
p92fJPbX8CzAglutbE+3v/MD8CCAllTiLZnJZPVj4Kux2/wF6EryDgF1+rb5q8jp
ObTT9817mHVwWVUYzbgceZtd43IocOlKZRmF1qivwScMGylQTe1wfMjunpD5pVt8
Zg4UDNknNfYduqpaG546E6e1zerGNaJK7SHnsuzHRUVU5icNqtgBk061CehP9Ksq
DvYXLUl4xF16j6xJAqIZPNrBkJGdQf4q1g5x2FiBm7rSQU5owzqh5rkVk4EBFFzn
UtzeXpqbStbsZHXycyxBNdq2HXxkFPf2NXZ+bkripPg+DifOGots1uwvAft+6iAE
GudK6qxAvr8phR1cRyy6BahGtgOStXbZYEz0ZdU6t7qFfZMz+DomD5Jimj0kAe6B
s6ras5xm8q3/Py87N/KNjKtSEpgsHv/7F+idde7ODtHhpRL5HCBqhkZOSRkMMZqI
ptX1oSTvBXwRKyi5x9YhkKHUFqfFSUTfJhiRFCWK+IEAv3Y7SipJtfkqxRbI6fEV
FfCeueKDDdViBtseaRceVLJ8Tlr6Qjy27fkPPTqJpthqPpCdoZ0=
=ENfF
-----END PGP SIGNATURE-----
Merge tag 'x86_urgent_for_v5.13_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
"The three SEV commits are not really urgent material. But we figured
since getting them in now will avoid a huge amount of conflicts
between future SEV changes touching tip, the kvm and probably other
trees, sending them to you now would be best.
The idea is that the tip, kvm etc branches for 5.14 will all base
ontop of -rc2 and thus everything will be peachy. What is more, those
changes are purely mechanical and defines movement so they should be
fine to go now (famous last words).
Summary:
- Enable -Wundef for the compressed kernel build stage
- Reorganize SEV code to streamline and simplify future development"
* tag 'x86_urgent_for_v5.13_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/boot/compressed: Enable -Wundef
x86/msr: Rename MSR_K8_SYSCFG to MSR_AMD64_SYSCFG
x86/sev: Move GHCB MSR protocol and NAE definitions in a common header
x86/sev-es: Rename sev-es.{ch} to sev.{ch}
The SYSCFG MSR continued being updated beyond the K8 family; drop the K8
name from it.
Suggested-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Joerg Roedel <jroedel@suse.de>
Link: https://lkml.kernel.org/r/20210427111636.1207-4-brijesh.singh@amd.com
The capability that exposes new ioctl KVM_X86_SET_MSR_FILTER to
userspace is specified incorrectly as the ioctl itself (instead of
KVM_CAP_X86_MSR_FILTER). This patch fixes it.
Fixes: 1a155254ff ("KVM: x86: Introduce MSR filtering")
Reviewed-by: Alexander Graf <graf@amazon.de>
Signed-off-by: Siddharth Chandrasekaran <sidcha@amazon.de>
Message-Id: <20210503120059.9283-1-sidcha@amazon.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Stage-2 isolation for the host kernel when running in protected mode
- Guest SVE support when running in nVHE mode
- Force W^X hypervisor mappings in nVHE mode
- ITS save/restore for guests using direct injection with GICv4.1
- nVHE panics now produce readable backtraces
- Guest support for PTP using the ptp_kvm driver
- Performance improvements in the S2 fault handler
x86:
- Optimizations and cleanup of nested SVM code
- AMD: Support for virtual SPEC_CTRL
- Optimizations of the new MMU code: fast invalidation,
zap under read lock, enable/disably dirty page logging under
read lock
- /dev/kvm API for AMD SEV live migration (guest API coming soon)
- support SEV virtual machines sharing the same encryption context
- support SGX in virtual machines
- add a few more statistics
- improved directed yield heuristics
- Lots and lots of cleanups
Generic:
- Rework of MMU notifier interface, simplifying and optimizing
the architecture-specific code
- Some selftests improvements
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmCJ13kUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroM1HAgAqzPxEtiTPTFeFJV5cnPPJ3dFoFDK
y/juZJUQ1AOtvuWzzwuf175ewkv9vfmtG6rVohpNSkUlJYeoc6tw7n8BTTzCVC1b
c/4Dnrjeycr6cskYlzaPyV6MSgjSv5gfyj1LA5UEM16LDyekmaynosVWY5wJhju+
Bnyid8l8Utgz+TLLYogfQJQECCrsU0Wm//n+8TWQgLf1uuiwshU5JJe7b43diJrY
+2DX+8p9yWXCTz62sCeDWNahUv8AbXpMeJ8uqZPYcN1P0gSEUGu8xKmLOFf9kR7b
M4U1Gyz8QQbjd2lqnwiWIkvRLX6gyGVbq2zH0QbhUe5gg3qGUX7JjrhdDQ==
=AXUi
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"This is a large update by KVM standards, including AMD PSP (Platform
Security Processor, aka "AMD Secure Technology") and ARM CoreSight
(debug and trace) changes.
ARM:
- CoreSight: Add support for ETE and TRBE
- Stage-2 isolation for the host kernel when running in protected
mode
- Guest SVE support when running in nVHE mode
- Force W^X hypervisor mappings in nVHE mode
- ITS save/restore for guests using direct injection with GICv4.1
- nVHE panics now produce readable backtraces
- Guest support for PTP using the ptp_kvm driver
- Performance improvements in the S2 fault handler
x86:
- AMD PSP driver changes
- Optimizations and cleanup of nested SVM code
- AMD: Support for virtual SPEC_CTRL
- Optimizations of the new MMU code: fast invalidation, zap under
read lock, enable/disably dirty page logging under read lock
- /dev/kvm API for AMD SEV live migration (guest API coming soon)
- support SEV virtual machines sharing the same encryption context
- support SGX in virtual machines
- add a few more statistics
- improved directed yield heuristics
- Lots and lots of cleanups
Generic:
- Rework of MMU notifier interface, simplifying and optimizing the
architecture-specific code
- a handful of "Get rid of oprofile leftovers" patches
- Some selftests improvements"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (379 commits)
KVM: selftests: Speed up set_memory_region_test
selftests: kvm: Fix the check of return value
KVM: x86: Take advantage of kvm_arch_dy_has_pending_interrupt()
KVM: SVM: Skip SEV cache flush if no ASIDs have been used
KVM: SVM: Remove an unnecessary prototype declaration of sev_flush_asids()
KVM: SVM: Drop redundant svm_sev_enabled() helper
KVM: SVM: Move SEV VMCB tracking allocation to sev.c
KVM: SVM: Explicitly check max SEV ASID during sev_hardware_setup()
KVM: SVM: Unconditionally invoke sev_hardware_teardown()
KVM: SVM: Enable SEV/SEV-ES functionality by default (when supported)
KVM: SVM: Condition sev_enabled and sev_es_enabled on CONFIG_KVM_AMD_SEV=y
KVM: SVM: Append "_enabled" to module-scoped SEV/SEV-ES control variables
KVM: SEV: Mask CPUID[0x8000001F].eax according to supported features
KVM: SVM: Move SEV module params/variables to sev.c
KVM: SVM: Disable SEV/SEV-ES if NPT is disabled
KVM: SVM: Free sev_asid_bitmap during init if SEV setup fails
KVM: SVM: Zero out the VMCB array used to track SEV ASID association
x86/sev: Drop redundant and potentially misleading 'sev_enabled'
KVM: x86: Move reverse CPUID helpers to separate header file
KVM: x86: Rename GPR accessors to make mode-aware variants the defaults
...
well contained to Documentation/ itself. Highlights include:
- The Chinese translators have been busy and show no signs of stopping
anytime soon. Italian has also caught up.
- Aditya Srivastava has been working on improvements to the kernel-doc
script.
- Thorsten continues his work on reporting-issues.rst and related
documentation around regression reporting.
- Lots of documentation updates, typo fixes, etc. as usual
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAmCG5moPHGNvcmJldEBs
d24ubmV0AAoJEBdDWhNsDH5YCoUH/1q/O+IvS+JNkxneDxbB6OC799BQpabZHi7/
HbYfgfX0nKrV3NAwIhigsIj6WHRE+5p2rKiHOuQxL3daJyfZSqQl0/yI0Ag7Of4g
7y1FKBQrfqS6tJcyNckdtBfxYUQP9yCJY0xfIexkTNiujbmkMKDSJD7lKXd0AaTM
styCvTbgTPTzadL5bIHj/GxJ9s8DsxO3y9LGdRc+GrNzPFliMYWlJgbR28zjEKBm
UQzy7JGNBX3qTJwgjvv/myqRDy6MligvGrP+wG0KTnAHXKkvDFl3p46kPwzdk1JE
+F5sbboUWh20GLYy9t4MZOcq38FUcEPlRPXkxsGNyA8co5ij8+g=
=7db3
-----END PGP SIGNATURE-----
Merge tag 'docs-5.13' of git://git.lwn.net/linux
Pull documentation updates from Jonathan Corbet:
"It's been a relatively busy cycle in docsland, though more than
usually well contained to Documentation/ itself. Highlights include:
- The Chinese translators have been busy and show no signs of
stopping anytime soon. Italian has also caught up.
- Aditya Srivastava has been working on improvements to the
kernel-doc script.
- Thorsten continues his work on reporting-issues.rst and related
documentation around regression reporting.
- Lots of documentation updates, typo fixes, etc. as usual"
* tag 'docs-5.13' of git://git.lwn.net/linux: (139 commits)
docs/zh_CN: add openrisc translation to zh_CN index
docs/zh_CN: add openrisc index.rst translation
docs/zh_CN: add openrisc todo.rst translation
docs/zh_CN: add openrisc openrisc_port.rst translation
docs/zh_CN: add core api translation to zh_CN index
docs/zh_CN: add core-api index.rst translation
docs/zh_CN: add core-api irq index.rst translation
docs/zh_CN: add core-api irq irqflags-tracing.rst translation
docs/zh_CN: add core-api irq irq-domain.rst translation
docs/zh_CN: add core-api irq irq-affinity.rst translation
docs/zh_CN: add core-api irq concepts.rst translation
docs: sphinx-pre-install: don't barf on beta Sphinx releases
scripts: kernel-doc: improve parsing for kernel-doc comments syntax
docs/zh_CN: two minor fixes in zh_CN/doc-guide/
Documentation: dev-tools: Add Testing Overview
docs/zh_CN: add translations in zh_CN/dev-tools/gcov
docs: reporting-issues: make people CC the regressions list
MAINTAINERS: add regressions mailing list
doc:it_IT: align Italian documentation
docs/zh_CN: sync reporting-issues.rst
...
New features:
- Stage-2 isolation for the host kernel when running in protected mode
- Guest SVE support when running in nVHE mode
- Force W^X hypervisor mappings in nVHE mode
- ITS save/restore for guests using direct injection with GICv4.1
- nVHE panics now produce readable backtraces
- Guest support for PTP using the ptp_kvm driver
- Performance improvements in the S2 fault handler
- Alexandru is now a reviewer (not really a new feature...)
Fixes:
- Proper emulation of the GICR_TYPER register
- Handle the complete set of relocation in the nVHE EL2 object
- Get rid of the oprofile dependency in the PMU code (and of the
oprofile body parts at the same time)
- Debug and SPE fixes
- Fix vcpu reset
-----BEGIN PGP SIGNATURE-----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=fpey
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 updates for Linux 5.13
New features:
- Stage-2 isolation for the host kernel when running in protected mode
- Guest SVE support when running in nVHE mode
- Force W^X hypervisor mappings in nVHE mode
- ITS save/restore for guests using direct injection with GICv4.1
- nVHE panics now produce readable backtraces
- Guest support for PTP using the ptp_kvm driver
- Performance improvements in the S2 fault handler
- Alexandru is now a reviewer (not really a new feature...)
Fixes:
- Proper emulation of the GICR_TYPER register
- Handle the complete set of relocation in the nVHE EL2 object
- Get rid of the oprofile dependency in the PMU code (and of the
oprofile body parts at the same time)
- Debug and SPE fixes
- Fix vcpu reset
The command finalize the guest receiving process and make the SEV guest
ready for the execution.
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: x86@kernel.org
Cc: kvm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Reviewed-by: Steve Rutherford <srutherford@google.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Message-Id: <d08914dc259644de94e29b51c3b68a13286fc5a3.1618498113.git.ashish.kalra@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The command is used for copying the incoming buffer into the
SEV guest memory space.
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: x86@kernel.org
Cc: kvm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Reviewed-by: Steve Rutherford <srutherford@google.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Message-Id: <c5d0e3e719db7bb37ea85d79ed4db52e9da06257.1618498113.git.ashish.kalra@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The command is used to create the encryption context for an incoming
SEV guest. The encryption context can be later used by the hypervisor
to import the incoming data into the SEV guest memory space.
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: x86@kernel.org
Cc: kvm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Reviewed-by: Steve Rutherford <srutherford@google.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Message-Id: <c7400111ed7458eee01007c4d8d57cdf2cbb0fc2.1618498113.git.ashish.kalra@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
After completion of SEND_START, but before SEND_FINISH, the source VMM can
issue the SEND_CANCEL command to stop a migration. This is necessary so
that a cancelled migration can restart with a new target later.
Reviewed-by: Nathan Tempelman <natet@google.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Steve Rutherford <srutherford@google.com>
Message-Id: <20210412194408.2458827-1-srutherford@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
