drm pull for 5.12-rc1

docs:
 - lots of updated docs
 
 core:
 - require crtc to have unique primary plane
 - fourcc macro fix
 - PCI bar quirk for bar resizing
 - don't sent hotplug on error
 - move vm code to legacy
 - nuke hose only used on old oboslete alpha
 
 dma-buf:
 - kernel doc updates
 - improved lock tracking
 
 dp/hdmi:
 - DP-HDMI2.1 protocol converter support
 
 ttm:
 - bo size handling cleanup
 - release a pinned bo warning
 - cleanup lru handler
 - avoid using pages with drm_prime_sg_to_page_addr_arrays
 
 cma-helper:
 - prime/mmap fixes
 
 bridge:
 - add DP support
 
 gma500:
 - remove gma3600 support
 
 i915:
 - try eDP fast/narrow link again with fallback
 - Intel eDP backlight control
 - replace display register read/write macros
 - refactor intel_display.c
 - display power improvements
 - HPD code cleanup
 - Rocketlake display fixes
 - Power/backlight/RPM fixes
 - DG1 display fix
 - IVB/BYT clear residuals security fix again
 - make i915 mitigations options via parameter
 - HSW GT1 GPU hangs fixes
 - DG1 workaround hang fixes
 - TGL DMAR hang avoidance
 - Lots of GT fixes
 - follow on fixes for residuals clear
 - gen7 per-engine-reset support
 - HDCP2.2 + HDCP1.4 GEN12 DP MST support
 - TGL clear color support
 - backlight refactoring
 - VRR/Adaptive sync enabling on DP/EDP for TGL+
 - async flips for all ilk+
 
 amdgpu:
 - rework IH ring handling (Vega/Navi)
 - rework HDP handling (Vega/Navi)
 - swSMU updates for renoir/vangogh
 - Sienna Cichild overdrive support
 - FP16 on DCE8-11 support
 - GPU reset on navy flounder/vangogh
 - SMU profile fixes for APU
 - SR-IOV fixes
 - Vangogh SMU fixes
 - fan speed control fixes
 
 amdkfd:
 - config handling fix
 - buffer free fix
 - recursive lock warnings fix
 
 nouveau:
 - Turing MMU fault recovery fixes
 - mDP connectors reporting fix
 - audio locking fixes
 - rework engines/instances code to support new scheme
 
 tegra:
 - VIC newer firmware support
 - display/gr2d fixes for older tegra
 - pm reference leak fix
 
 mediatek:
 - SOC MT8183 support
 - decouple sub driver + share mtk mutex driver
 
 radeon:
 - PCI resource fix for some platforms
 
 ingenic:
 - pm support
 - 8-bit delta RGB panels
 
 vmwgfx:
 - managed driver helpers
 
 vc4:
 - BCM2711 DSI1 support
 - converted to atomic helpers
 - enable 10/12 bpc outputs
 - gem prime mmap helpers
 - CEC fix
 
 omap:
 - use degamma table
 - CTM support
 - rework DSI support
 
 imx:
 - stack usage fixes
 - drm managed support
 - imx-tve clock provider leak fix
 -
 
 rcar-du:
 - default mode fixes
 - conversion to managed API
 
 hisilicon:
 - use simple encoder
 
 vkms:
 - writeback connector support
 
 d3:
 - BT2020 support
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJgL1RCAAoJEAx081l5xIa+BxoP/325goULPaGBwUKgVkSl6mTT
 Ror0r8U3ifQHrqPk57C5b4GfvNuJ8vJZC13GYiiwooPn/+sifbl8haMRQWKyH4fz
 PThm9vroIQZ8VC+fqixgrOwFKEwkKqucZ3f7dEj8paBVVcO9DcBIaSeO4QW2EAR/
 n2r7nHtFxVHYEwiOnJvIeWIh1dAmudr/U6pHyB6PnuofVgqveXHT5+mmkY51pJqF
 sn2Y+Ye3tP5+FDlKkueg8JUteyFRTGz1g7JQThxSI//b/+p4MmmRX03qcWvIIkOX
 XiNlP73Ssh7PPMcUgwFmvKbMfm9sfpwf7yX3nqzaAQAHZGufznxX0k50BRkxWyYL
 eMVxRs5/Vl5JAn3vhspAUZhc4BgOcJm9L4zazb7YqDghwpohSnXk/riunUevqFCf
 Dgsc8N63nft8WEBk3aB6loRpDDpo5rm8gVpl5LKk1YXT92o9x4eP+/B1+kf2RepM
 52H3CKD1GLK3ayJlRNa/ljE2qXaQru+PmjCxORgDPEZ7SXdb8q5bfH0MjCB4vEBp
 YIybWYIDQzRBKglN5qMQ3XNIgv95oqrxXKaDFFtp8lMEjVG0v+y2antzFHftXS2g
 Cj0aeyBx4PC3pNbZe54npEhFwVIs7NFXX9brpQnnLJvQj/Qp+GEhf8uqiCUJNnYA
 AF7qRRL0bBGTeiJGt4nM
 =TeKl
 -----END PGP SIGNATURE-----

Merge tag 'drm-next-2021-02-19' of git://anongit.freedesktop.org/drm/drm

Pull drm updates from Dave Airlie:
 "A pretty normal tree, lots of refactoring across the board, ttm, i915,
  nouveau, and bunch of features in various drivers.

  docs:
   - lots of updated docs

  core:
   - require crtc to have unique primary plane
   - fourcc macro fix
   - PCI bar quirk for bar resizing
   - don't sent hotplug on error
   - move vm code to legacy
   - nuke hose only used on old oboslete alpha

  dma-buf:
   - kernel doc updates
   - improved lock tracking

  dp/hdmi:
   - DP-HDMI2.1 protocol converter support

  ttm:
   - bo size handling cleanup
   - release a pinned bo warning
   - cleanup lru handler
   - avoid using pages with drm_prime_sg_to_page_addr_arrays

  cma-helper:
   - prime/mmap fixes

  bridge:
   - add DP support

  gma500:
   - remove gma3600 support

  i915:
   - try eDP fast/narrow link again with fallback
   - Intel eDP backlight control
   - replace display register read/write macros
   - refactor intel_display.c
   - display power improvements
   - HPD code cleanup
   - Rocketlake display fixes
   - Power/backlight/RPM fixes
   - DG1 display fix
   - IVB/BYT clear residuals security fix again
   - make i915 mitigations options via parameter
   - HSW GT1 GPU hangs fixes
   - DG1 workaround hang fixes
   - TGL DMAR hang avoidance
   - Lots of GT fixes
   - follow on fixes for residuals clear
   - gen7 per-engine-reset support
   - HDCP2.2 + HDCP1.4 GEN12 DP MST support
   - TGL clear color support
   - backlight refactoring
   - VRR/Adaptive sync enabling on DP/EDP for TGL+
   - async flips for all ilk+

  amdgpu:
   - rework IH ring handling (Vega/Navi)
   - rework HDP handling (Vega/Navi)
   - swSMU updates for renoir/vangogh
   - Sienna Cichild overdrive support
   - FP16 on DCE8-11 support
   - GPU reset on navy flounder/vangogh
   - SMU profile fixes for APU
   - SR-IOV fixes
   - Vangogh SMU fixes
   - fan speed control fixes

  amdkfd:
   - config handling fix
   - buffer free fix
   - recursive lock warnings fix

  nouveau:
   - Turing MMU fault recovery fixes
   - mDP connectors reporting fix
   - audio locking fixes
   - rework engines/instances code to support new scheme

  tegra:
   - VIC newer firmware support
   - display/gr2d fixes for older tegra
   - pm reference leak fix

  mediatek:
   - SOC MT8183 support
   - decouple sub driver + share mtk mutex driver

  radeon:
   - PCI resource fix for some platforms

  ingenic:
   - pm support
   - 8-bit delta RGB panels

  vmwgfx:
   - managed driver helpers

  vc4:
   - BCM2711 DSI1 support
   - converted to atomic helpers
   - enable 10/12 bpc outputs
   - gem prime mmap helpers
   - CEC fix

  omap:
   - use degamma table
   - CTM support
   - rework DSI support

  imx:
   - stack usage fixes
   - drm managed support
   - imx-tve clock provider leak fix
-

  rcar-du:
   - default mode fixes
   - conversion to managed API

  hisilicon:
   - use simple encoder

  vkms:
   - writeback connector support

  d3:
   - BT2020 support"

* tag 'drm-next-2021-02-19' of git://anongit.freedesktop.org/drm/drm: (1459 commits)
  drm/amdgpu: Set reference clock to 100Mhz on Renoir (v2)
  drm/radeon: OLAND boards don't have VCE
  drm/amdkfd: Fix recursive lock warnings
  drm/amd/display: Add FPU wrappers to dcn21_validate_bandwidth()
  drm/amd/display: Fix potential integer overflow
  drm/amdgpu/display: remove hdcp_srm sysfs on device removal
  drm/amdgpu: fix CGTS_TCC_DISABLE register offset on gfx10.3
  drm/i915/gt: Correct surface base address for renderclear
  drm/i915: Disallow plane x+w>stride on ilk+ with X-tiling
  drm/nouveau/top/ga100: initial support
  drm/nouveau/top: add ioctrl/nvjpg
  drm/nouveau/privring: rename from ibus
  drm/nouveau/nvkm: remove nvkm_subdev.index
  drm/nouveau/nvkm: determine subdev id/order from layout
  drm/nouveau/vic: switch to instanced constructor
  drm/nouveau/sw: switch to instanced constructor
  drm/nouveau/sec2: switch to instanced constructor
  drm/nouveau/sec: switch to instanced constructor
  drm/nouveau/pm: switch to instanced constructor
  drm/nouveau/nvenc: switch to instanced constructor
  ...

Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-backend.yaml

@@ -84,36 +84,23 @@ properties:
     const: dma-mem
 
   ports:
-    type: object
+    $ref: /schemas/graph.yaml#/properties/ports
-    description: |
-      A ports node with endpoint definitions as defined in
-      Documentation/devicetree/bindings/media/video-interfaces.txt.
 
     properties:
-      "#address-cells":
-        const: 1
-
-      "#size-cells":
-        const: 0
-
       port@0:
-        type: object
+        $ref: /schemas/graph.yaml#/properties/port
-        description: |
+        description:
           Input endpoints of the controller.
 
       port@1:
-        type: object
+        $ref: /schemas/graph.yaml#/properties/port
-        description: |
+        description:
           Output endpoints of the controller.
 
     required:
-      - "#address-cells"
-      - "#size-cells"
       - port@0
       - port@1
 
-    additionalProperties: false
-
 required:
   - compatible
   - reg

Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-frontend.yaml

@@ -57,35 +57,22 @@ properties:
     maxItems: 1
 
   ports:
-    type: object
+    $ref: /schemas/graph.yaml#/properties/ports
-    description: |
-      A ports node with endpoint definitions as defined in
-      Documentation/devicetree/bindings/media/video-interfaces.txt.
 
     properties:
-      "#address-cells":
-        const: 1
-
-      "#size-cells":
-        const: 0
-
       port@0:
-        type: object
+        $ref: /schemas/graph.yaml#/properties/port
         description: |
           Input endpoints of the controller.
 
       port@1:
-        type: object
+        $ref: /schemas/graph.yaml#/properties/port
         description: |
           Output endpoints of the controller.
 
     required:
-      - "#address-cells"
-      - "#size-cells"
       - port@1
 
-    additionalProperties: false
-
 required:
   - compatible
   - reg

Documentation/devicetree/bindings/display/allwinner,sun4i-a10-hdmi.yaml

@@ -76,37 +76,24 @@ properties:
       - const: audio-tx
 
   ports:
-    type: object
+    $ref: /schemas/graph.yaml#/properties/ports
-    description: |
-      A ports node with endpoint definitions as defined in
-      Documentation/devicetree/bindings/media/video-interfaces.txt.
 
     properties:
-      "#address-cells":
-        const: 1
-
-      "#size-cells":
-        const: 0
-
       port@0:
-        type: object
+        $ref: /schemas/graph.yaml#/properties/port
         description: |
           Input endpoints of the controller.
 
       port@1:
-        type: object
+        $ref: /schemas/graph.yaml#/properties/port
         description: |
           Output endpoints of the controller. Usually an HDMI
           connector.
 
     required:
-      - "#address-cells"
-      - "#size-cells"
       - port@0
       - port@1
 
-    additionalProperties: false
-
 required:
   - compatible
   - reg

Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tcon.yaml

@@ -115,31 +115,24 @@ properties:
           - const: lvds
 
   ports:
-    type: object
+    $ref: /schemas/graph.yaml#/properties/ports
-    description: |
-      A ports node with endpoint definitions as defined in
-      Documentation/devicetree/bindings/media/video-interfaces.txt.
 
     properties:
-      "#address-cells":
-        const: 1
-
-      "#size-cells":
-        const: 0
-
       port@0:
-        type: object
+        $ref: /schemas/graph.yaml#/properties/port
         description: |
           Input endpoints of the controller.
 
       port@1:
-        type: object
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
         description: |
           Output endpoints of the controller.
 
         patternProperties:
           "^endpoint(@[0-9])$":
-            type: object
+            $ref: /schemas/graph.yaml#/$defs/endpoint-base
+            unevaluatedProperties: false
 
             properties:
               allwinner,tcon-channel:
@@ -156,16 +149,10 @@ properties:
                   property is not present, the endpoint number will be
                   used as the channel number.
 
-            unevaluatedProperties: true
-
     required:
-      - "#address-cells"
-      - "#size-cells"
       - port@0
       - port@1
 
-    additionalProperties: false
-
 required:
   - compatible
   - reg

Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tv-encoder.yaml

@@ -24,11 +24,9 @@ properties:
     maxItems: 1
 
   port:
-    type: object
+    $ref: /schemas/graph.yaml#/properties/port
     description:
-      A port node with endpoint definitions as defined in
+      The first port should be the input endpoint, usually coming from the
-      Documentation/devicetree/bindings/media/video-interfaces.txt. The
-      first port should be the input endpoint, usually coming from the
       associated TCON.
 
 required:

Documentation/devicetree/bindings/display/allwinner,sun6i-a31-drc.yaml

@@ -46,36 +46,23 @@ properties:
     maxItems: 1
 
   ports:
-    type: object
+    $ref: /schemas/graph.yaml#/properties/ports
-    description: |
-      A ports node with endpoint definitions as defined in
-      Documentation/devicetree/bindings/media/video-interfaces.txt.
 
     properties:
-      "#address-cells":
-        const: 1
-
-      "#size-cells":
-        const: 0
-
       port@0:
-        type: object
+        $ref: /schemas/graph.yaml#/properties/port
         description: |
           Input endpoints of the controller.
 
       port@1:
-        type: object
+        $ref: /schemas/graph.yaml#/properties/port
         description: |
           Output endpoints of the controller.
 
     required:
-      - "#address-cells"
-      - "#size-cells"
       - port@0
       - port@1
 
-    additionalProperties: false
-
 required:
   - compatible
   - reg

Documentation/devicetree/bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml

@@ -47,11 +47,9 @@ properties:
     const: dphy
 
   port:
-    type: object
+    $ref: /schemas/graph.yaml#/properties/port
     description:
-      A port node with endpoint definitions as defined in
+      The port should be the input endpoint, usually coming from the
-      Documentation/devicetree/bindings/media/video-interfaces.txt. That
-      port should be the input endpoint, usually coming from the
       associated TCON.
 
 required:

Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-de2-mixer.yaml

@@ -43,35 +43,22 @@ properties:
     maxItems: 1
 
   ports:
-    type: object
+    $ref: /schemas/graph.yaml#/properties/ports
-    description: |
-      A ports node with endpoint definitions as defined in
-      Documentation/devicetree/bindings/media/video-interfaces.txt.
 
     properties:
-      "#address-cells":
-        const: 1
-
-      "#size-cells":
-        const: 0
-
       port@0:
-        type: object
+        $ref: /schemas/graph.yaml#/properties/port
         description: |
           Input endpoints of the controller.
 
       port@1:
-        type: object
+        $ref: /schemas/graph.yaml#/properties/port
         description: |
           Output endpoints of the controller.
 
     required:
-      - "#address-cells"
-      - "#size-cells"
       - port@1
 
-    additionalProperties: false
-
 required:
   - compatible
   - reg

Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml

@@ -93,38 +93,25 @@ properties:
       The VCC power supply of the controller
 
   ports:
-    type: object
+    $ref: /schemas/graph.yaml#/properties/ports
-    description: |
-      A ports node with endpoint definitions as defined in
-      Documentation/devicetree/bindings/media/video-interfaces.txt.
 
     properties:
-      "#address-cells":
-        const: 1
-
-      "#size-cells":
-        const: 0
-
       port@0:
-        type: object
+        $ref: /schemas/graph.yaml#/properties/port
         description: |
           Input endpoints of the controller. Usually the associated
           TCON.
 
       port@1:
-        type: object
+        $ref: /schemas/graph.yaml#/properties/port
         description: |
           Output endpoints of the controller. Usually an HDMI
           connector.
 
     required:
-      - "#address-cells"
-      - "#size-cells"
       - port@0
       - port@1
 
-    additionalProperties: false
-
 required:
   - compatible
   - reg

Documentation/devicetree/bindings/display/allwinner,sun8i-r40-tcon-top.yaml

@@ -80,141 +80,45 @@ properties:
     maxItems: 1
 
   ports:
-    type: object
+    $ref: /schemas/graph.yaml#/properties/ports
-    description: |
-      A ports node with endpoint definitions as defined in
-      Documentation/devicetree/bindings/media/video-interfaces.txt.
-      All ports should have only one endpoint connected to
-      remote endpoint.
 
     properties:
-      "#address-cells":
-        const: 1
-
-      "#size-cells":
-        const: 0
-
       port@0:
-        type: object
+        $ref: /schemas/graph.yaml#/properties/port
         description: |
           Input endpoint for Mixer 0 mux.
 
       port@1:
-        type: object
+        $ref: /schemas/graph.yaml#/properties/port
         description: |
           Output endpoint for Mixer 0 mux
 
-        properties:
-          "#address-cells":
-            const: 1
-
-          "#size-cells":
-            const: 0
-
-          reg: true
-
-        patternProperties:
-          "^endpoint@[0-9]$":
-            type: object
-
-            properties:
-              reg:
-                description: |
-                  ID of the target TCON
-
-            required:
-              - reg
-
-        required:
-          - "#address-cells"
-          - "#size-cells"
-
-        additionalProperties: false
-
       port@2:
-        type: object
+        $ref: /schemas/graph.yaml#/properties/port
         description: |
           Input endpoint for Mixer 1 mux.
 
       port@3:
-        type: object
+        $ref: /schemas/graph.yaml#/properties/port
         description: |
           Output endpoint for Mixer 1 mux
 
-        properties:
-          "#address-cells":
-            const: 1
-
-          "#size-cells":
-            const: 0
-
-          reg: true
-
-        patternProperties:
-          "^endpoint@[0-9]$":
-            type: object
-
-            properties:
-              reg:
-                description: |
-                  ID of the target TCON
-
-            required:
-              - reg
-
-        required:
-          - "#address-cells"
-          - "#size-cells"
-
-        additionalProperties: false
-
       port@4:
-        type: object
+        $ref: /schemas/graph.yaml#/properties/port
         description: |
           Input endpoint for HDMI mux.
 
-        properties:
-          "#address-cells":
-            const: 1
-
-          "#size-cells":
-            const: 0
-
-          reg: true
-
-        patternProperties:
-          "^endpoint@[0-9]$":
-            type: object
-
-            properties:
-              reg:
-                description: |
-                  ID of the target TCON
-
-            required:
-              - reg
-
-        required:
-          - "#address-cells"
-          - "#size-cells"
-
-        additionalProperties: false
-
       port@5:
-        type: object
+        $ref: /schemas/graph.yaml#/properties/port
         description: |
           Output endpoint for HDMI mux
 
     required:
-      - "#address-cells"
-      - "#size-cells"
       - port@0
       - port@1
       - port@4
       - port@5
 
-    additionalProperties: false
-
 required:
   - "#clock-cells"
   - compatible

Documentation/devicetree/bindings/display/allwinner,sun9i-a80-deu.yaml

@@ -40,36 +40,23 @@ properties:
     maxItems: 1
 
   ports:
-    type: object
+    $ref: /schemas/graph.yaml#/properties/ports
-    description: |
-      A ports node with endpoint definitions as defined in
-      Documentation/devicetree/bindings/media/video-interfaces.txt.
 
     properties:
-      "#address-cells":
-        const: 1
-
-      "#size-cells":
-        const: 0
-
       port@0:
-        type: object
+        $ref: /schemas/graph.yaml#/properties/port
         description: |
           Input endpoints of the controller.
 
       port@1:
-        type: object
+        $ref: /schemas/graph.yaml#/properties/port
         description: |
           Output endpoints of the controller.
 
     required:
-      - "#address-cells"
-      - "#size-cells"
       - port@0
       - port@1
 
-    additionalProperties: false
-
 required:
   - compatible
   - reg

Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.yaml

@@ -81,12 +81,12 @@ properties:
     description: phandle to an external 5V regulator to power the HDMI logic
 
   port@0:
-    type: object
+    $ref: /schemas/graph.yaml#/properties/port
     description:
       A port node pointing to the VENC Input port node.
 
   port@1:
-    type: object
+    $ref: /schemas/graph.yaml#/properties/port
     description:
       A port node pointing to the TMDS Output port node.
 

Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml

@@ -83,12 +83,12 @@ properties:
     description: phandle to the associated power domain
 
   port@0:
-    type: object
+    $ref: /schemas/graph.yaml#/properties/port
     description:
       A port node pointing to the CVBS VDAC port node.
 
   port@1:
-    type: object
+    $ref: /schemas/graph.yaml#/properties/port
     description:
       A port node pointing to the HDMI-TX port node.
 

Documentation/devicetree/bindings/display/brcm,bcm2711-hdmi.yaml

@@ -53,6 +53,24 @@ properties:
       - const: audio
       - const: cec
 
+  interrupts:
+    items:
+      - description: CEC TX interrupt
+      - description: CEC RX interrupt
+      - description: CEC stuck at low interrupt
+      - description: Wake-up interrupt
+      - description: Hotplug connected interrupt
+      - description: Hotplug removed interrupt
+
+  interrupt-names:
+    items:
+      - const: cec-tx
+      - const: cec-rx
+      - const: cec-low
+      - const: wakeup
+      - const: hpd-connected
+      - const: hpd-removed
+
   ddc:
     allOf:
       - $ref: /schemas/types.yaml#/definitions/phandle
@@ -90,7 +108,7 @@ required:
   - resets
   - ddc
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |

Documentation/devicetree/bindings/display/brcm,bcm2835-dpi.yaml

@@ -27,10 +27,9 @@ properties:
       - const: pixel
 
   port:
-    type: object
+    $ref: /schemas/graph.yaml#/properties/port
-    description: >
+    description:
-      Port node with a single endpoint connecting to the panel, as
+      Port node with a single endpoint connecting to the panel.
-      defined in Documentation/devicetree/bindings/media/video-interfaces.txt.
 
 required:
   - compatible

Documentation/devicetree/bindings/display/brcm,bcm2835-dsi0.yaml

@@ -18,6 +18,7 @@ properties:
 
   compatible:
     enum:
+      - brcm,bcm2711-dsi1
       - brcm,bcm2835-dsi0
       - brcm,bcm2835-dsi1
 

Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml

@@ -35,16 +35,16 @@ properties:
     maxItems: 1
 
   ports:
-    type: object
+    $ref: /schemas/graph.yaml#/properties/ports
 
     properties:
       port@0:
-        type: object
+        $ref: /schemas/graph.yaml#/properties/port
         description:
           Video port for MIPI DSI input.
 
       port@1:
-        type: object
+        $ref: /schemas/graph.yaml#/properties/port
         description:
           Video port for panel or connector.
 

Documentation/devicetree/bindings/display/bridge/analogix,anx7814.yaml

@@ -42,31 +42,18 @@ properties:
     description: Regulator for 1.0V digital core power.
 
   ports:
-    type: object
+    $ref: /schemas/graph.yaml#/properties/ports
-    description:
-      A node containing input and output port nodes with endpoint
-      definitions as documented in
-      Documentation/devicetree/bindings/media/video-interfaces.txt
-      Documentation/devicetree/bindings/graph.txt
 
     properties:
       port@0:
-        type: object
+        $ref: /schemas/graph.yaml#/properties/port
         description: Video port for HDMI input.
 
-        properties:
-          reg:
-            const: 0
-
       port@1:
-        type: object
+        $ref: /schemas/graph.yaml#/properties/port
         description:
           Video port for SlimPort, DisplayPort, eDP or MyDP output.
 
-        properties:
-          reg:
-            const: 1
-
     required:
       - port@0
       - port@1

Documentation/devicetree/bindings/display/bridge/anx6345.yaml

@@ -32,31 +32,23 @@ properties:
     description: Regulator for 2.5V digital core power.
 
   ports:
-    type: object
+    $ref: /schemas/graph.yaml#/properties/ports
 
     properties:
-      '#address-cells':
-        const: 1
-
-      '#size-cells':
-        const: 0
-
       port@0:
-        type: object
+        $ref: /schemas/graph.yaml#/properties/port
-        description: |
+        description:
           Video port for LVTTL input
 
       port@1:
-        type: object
+        $ref: /schemas/graph.yaml#/properties/port
-        description: |
+        description:
           Video port for eDP output (panel or connector).
           May be omitted if EDID works reliably.
 
     required:
       - port@0
 
-    additionalProperties: false
-
 required:
   - compatible
   - reg

Documentation/devicetree/bindings/display/bridge/cdns,mhdp8546.yaml

@@ -57,47 +57,37 @@ properties:
     maxItems: 1
 
   ports:
-    type: object
+    $ref: /schemas/graph.yaml#/properties/ports
-    description:
-      Ports as described in Documentation/devicetree/bindings/graph.txt.
 
     properties:
-      '#address-cells':
-        const: 1
-
-      '#size-cells':
-        const: 0
-
       port@0:
-        type: object
+        $ref: /schemas/graph.yaml#/properties/port
         description:
           First input port representing the DP bridge input.
 
       port@1:
-        type: object
+        $ref: /schemas/graph.yaml#/properties/port
         description:
           Second input port representing the DP bridge input.
 
       port@2:
-        type: object
+        $ref: /schemas/graph.yaml#/properties/port
         description:
           Third input port representing the DP bridge input.
 
       port@3:
-        type: object
+        $ref: /schemas/graph.yaml#/properties/port
         description:
           Fourth input port representing the DP bridge input.
 
       port@4:
-        type: object
+        $ref: /schemas/graph.yaml#/properties/port
         description:
           Output port representing the DP bridge output.
 
     required:
       - port@0
       - port@4
-      - '#address-cells'
-      - '#size-cells'
 
 allOf:
   - if:

Documentation/devicetree/bindings/display/bridge/chrontel,ch7033.yaml

@@ -19,16 +19,16 @@ properties:
     description: I2C address of the device
 
   ports:
-    type: object
+    $ref: /schemas/graph.yaml#/properties/ports
 
     properties:
       port@0:
-        type: object
+        $ref: /schemas/graph.yaml#/properties/port
         description: |
           Video port for RGB input.
 
       port@1:
-        type: object
+        $ref: /schemas/graph.yaml#/properties/port
         description: |
           DVI port, should be connected to a node compatible with the
           dvi-connector binding.

Documentation/devicetree/bindings/display/bridge/intel,keembay-dsi.yaml

@@ -35,29 +35,21 @@ properties:
       - const: clk_mipi_cfg
 
   ports:
-    type: object
+    $ref: /schemas/graph.yaml#/properties/ports
 
     properties:
-      '#address-cells':
-        const: 1
-
-      '#size-cells':
-        const: 0
-
       port@0:
-        type: object
+        $ref: /schemas/graph.yaml#/properties/port
         description: MIPI DSI input port.
 
       port@1:
-        type: object
+        $ref: /schemas/graph.yaml#/properties/port
         description: DSI output port.
 
     required:
       - port@0
       - port@1
 
-    additionalProperties: false
-
 required:
   - compatible
   - reg

Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml

@@ -53,7 +53,7 @@ properties:
     description: extcon specifier for the Power Delivery
 
   port:
-    type: object
+    $ref: /schemas/graph.yaml#/properties/port
     description: A port node pointing to DPI host port node
 
 required:

Documentation/devicetree/bindings/display/bridge/lontium,lt9611.yaml

@@ -38,82 +38,26 @@ properties:
     description: Regulator for 3.3V IO power.
 
   ports:
-    type: object
+    $ref: /schemas/graph.yaml#/properties/ports
 
     properties:
-      "#address-cells":
-        const: 1
-
-      "#size-cells":
-        const: 0
-
       port@0:
-        type: object
+        $ref: /schemas/graph.yaml#/properties/port
-        description: |
+        description:
           Primary MIPI port-1 for MIPI input
 
-        properties:
-          reg:
-            const: 0
-
-        patternProperties:
-          "^endpoint(@[0-9])$":
-            type: object
-            additionalProperties: false
-
-            properties:
-              remote-endpoint:
-                $ref: /schemas/types.yaml#/definitions/phandle
-
-        required:
-          - reg
-
       port@1:
-        type: object
+        $ref: /schemas/graph.yaml#/properties/port
-        description: |
+        description:
           Additional MIPI port-2 for MIPI input, used in combination
           with primary MIPI port-1 to drive higher resolution displays
 
-        properties:
-          reg:
-            const: 1
-
-        patternProperties:
-          "^endpoint(@[0-9])$":
-            type: object
-            additionalProperties: false
-
-            properties:
-              remote-endpoint:
-                $ref: /schemas/types.yaml#/definitions/phandle
-
-        required:
-          - reg
-
       port@2:
-        type: object
+        $ref: /schemas/graph.yaml#/properties/port
-        description: |
+        description:
           HDMI port for HDMI output
 
-        properties:
-          reg:
-            const: 2
-
-        patternProperties:
-          "^endpoint(@[0-9])$":
-            type: object
-            additionalProperties: false
-
-            properties:
-              remote-endpoint:
-                $ref: /schemas/types.yaml#/definitions/phandle
-
-        required:
-          - reg
-
     required:
-      - "#address-cells"
-      - "#size-cells"
       - port@0
       - port@2
 

Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml

@@ -45,25 +45,17 @@ properties:
           - thine,thc63lvdm83d # For the THC63LVDM83D LVDS serializer
 
   ports:
-    type: object
+    $ref: /schemas/graph.yaml#/properties/ports
-    description: |
+
-      This device has two video ports. Their connections are modeled using the
-      OF graph bindings specified in Documentation/devicetree/bindings/graph.txt
     properties:
-      '#address-cells':
-        const: 1
-
-      '#size-cells':
-        const: 0
-
       port@0:
-        type: object
+        $ref: /schemas/graph.yaml#/properties/port
         description: |
           For LVDS encoders, port 0 is the parallel input
           For LVDS decoders, port 0 is the LVDS input
 
       port@1:
-        type: object
+        $ref: /schemas/graph.yaml#/properties/port
         description: |
           For LVDS encoders, port 1 is the LVDS output
           For LVDS decoders, port 1 is the parallel output
@@ -72,8 +64,6 @@ properties:
       - port@0
       - port@1
 
-    additionalProperties: false
-
   powerdown-gpios:
     description:
       The GPIO used to control the power down line of this device.

Documentation/devicetree/bindings/display/bridge/nwl-dsi.yaml

@@ -84,40 +84,23 @@ properties:
       - const: pclk
 
   ports:
-    type: object
+    $ref: /schemas/graph.yaml#/properties/ports
-    description:
+
-      A node containing DSI input & output port nodes with endpoint
-      definitions as documented in
-      Documentation/devicetree/bindings/graph.txt.
     properties:
       port@0:
-        type: object
+        $ref: /schemas/graph.yaml#/$defs/port-base
         description:
           Input port node to receive pixel data from the
           display controller. Exactly one endpoint must be
           specified.
         properties:
-          '#address-cells':
-            const: 1
-
-          '#size-cells':
-            const: 0
-
           endpoint@0:
+            $ref: /schemas/graph.yaml#/properties/endpoint
             description: sub-node describing the input from LCDIF
-            type: object
 
           endpoint@1:
+            $ref: /schemas/graph.yaml#/properties/endpoint
             description: sub-node describing the input from DCSS
-            type: object
-
-          reg:
-            const: 0
-
-        required:
-          - '#address-cells'
-          - '#size-cells'
-          - reg
 
         oneOf:
           - required:
@@ -125,28 +108,18 @@ properties:
           - required:
               - endpoint@1
 
-        additionalProperties: false
+        unevaluatedProperties: false
 
       port@1:
-        type: object
+        $ref: /schemas/graph.yaml#/properties/port
         description:
           DSI output port node to the panel or the next bridge
           in the chain
 
-      '#address-cells':
-        const: 1
-
-      '#size-cells':
-        const: 0
-
     required:
-      - '#address-cells'
-      - '#size-cells'
       - port@0
       - port@1
 
-    additionalProperties: false
-
 required:
   - '#address-cells'
   - '#size-cells'

Documentation/devicetree/bindings/display/bridge/ps8640.yaml

@@ -41,34 +41,22 @@ properties:
     description: Regulator for 3.3V digital core power.
 
   ports:
-    type: object
+    $ref: /schemas/graph.yaml#/properties/ports
-    description:
+
-      A node containing DSI input & output port nodes with endpoint
-      definitions as documented in
-      Documentation/devicetree/bindings/media/video-interfaces.txt
-      Documentation/devicetree/bindings/graph.txt
     properties:
-      '#address-cells':
-        const: 1
-
-      '#size-cells':
-        const: 0
-
       port@0:
-        type: object
+        $ref: /schemas/graph.yaml#/properties/port
-        description: |
+        description:
           Video port for DSI input
 
       port@1:
-        type: object
+        $ref: /schemas/graph.yaml#/properties/port
-        description: |
+        description:
           Video port for eDP output (panel or connector).
 
     required:
       - port@0
 
-    additionalProperties: false
-
 required:
   - compatible
   - reg

Documentation/devicetree/bindings/display/bridge/renesas,lvds.yaml

@@ -49,33 +49,21 @@ properties:
     maxItems: 1
 
   ports:
-    type: object
+    $ref: /schemas/graph.yaml#/properties/ports
-    description: |
-      This device has two video ports. Their connections are modelled using the
-      OF graph bindings specified in Documentation/devicetree/bindings/graph.txt.
-      Each port shall have a single endpoint.
 
     properties:
-      '#address-cells':
-        const: 1
-
-      '#size-cells':
-        const: 0
-
       port@0:
-        type: object
+        $ref: /schemas/graph.yaml#/properties/port
         description: Parallel RGB input port
 
       port@1:
-        type: object
+        $ref: /schemas/graph.yaml#/properties/port
         description: LVDS output port
 
     required:
       - port@0
       - port@1
 
-    additionalProperties: false
-
   power-domains:
     maxItems: 1
 
@@ -83,9 +71,9 @@ properties:
     $ref: /schemas/types.yaml#/definitions/phandle
     description:
       phandle to the companion LVDS encoder. This property is mandatory
-      for the first LVDS encoder on D3 and E3 SoCs, and shall point to
+      for the first LVDS encoder on R-Car D3 and E3, and RZ/G2E SoCs, and shall
-      the second encoder to be used as a companion in dual-link mode. It
+      point to the second encoder to be used as a companion in dual-link mode.
-      shall not be set for any other LVDS encoder.
+      It shall not be set for any other LVDS encoder.
 
 required:
   - compatible

Documentation/devicetree/bindings/display/bridge/simple-bridge.yaml

@@ -30,31 +30,21 @@ properties:
           - ti,ths8135
 
   ports:
-    type: object
+    $ref: /schemas/graph.yaml#/properties/ports
-    description: |
+
-      This device has two video ports. Their connections are modeled using the
-      OF graph bindings specified in Documentation/devicetree/bindings/graph.txt.
     properties:
-      '#address-cells':
-        const: 1
-
-      '#size-cells':
-        const: 0
-
       port@0:
-        type: object
+        $ref: /schemas/graph.yaml#/properties/port
         description: The bridge input
 
       port@1:
-        type: object
+        $ref: /schemas/graph.yaml#/properties/port
         description: The bridge output
 
     required:
       - port@0
       - port@1
 
-    additionalProperties: false
-
   enable-gpios:
     maxItems: 1
     description: GPIO controlling bridge enable

Documentation/devicetree/bindings/display/bridge/snps,dw-mipi-dsi.yaml

@@ -47,14 +47,15 @@ properties:
     const: apb
 
   ports:
-    type: object
+    $ref: /schemas/graph.yaml#/properties/ports
 
     properties:
       port@0:
-        type: object
+        $ref: /schemas/graph.yaml#/properties/port
         description: Input node to receive pixel data.
+
       port@1:
-        type: object
+        $ref: /schemas/graph.yaml#/properties/port
         description: DSI output node to panel.
 
     required:

Documentation/devicetree/bindings/display/bridge/thine,thc63lvd1024.yaml

@@ -25,46 +25,41 @@ properties:
     const: thine,thc63lvd1024
 
   ports:
-    type: object
+    $ref: /schemas/graph.yaml#/properties/ports
     description: |
-      This device has four video ports. Their connections are modeled using the
+      The device can operate in single or dual input and output modes.
-      OF graph bindings specified in Documentation/devicetree/bindings/graph.txt.
 
-      The device can operate in single-link mode or dual-link mode. In
+      When operating in single input mode, all pixels are received on port@0,
-      single-link mode, all pixels are received on port@0, and port@1 shall not
+      and port@1 shall not contain any endpoint. In dual input mode,
-      contain any endpoint. In dual-link mode, even-numbered pixels are
+      even-numbered pixels are received on port@0 and odd-numbered pixels on
-      received on port@0 and odd-numbered pixels on port@1, and both port@0 and
+      port@1, and both port@0 and port@1 shall contain endpoints.
-      port@1 shall contain endpoints.
+
+      When operating in single output mode all pixels are output from the first
+      CMOS/TTL port and port@3 shall not contain any endpoint. In dual output
+      mode pixels are output from both CMOS/TTL ports and both port@2 and
+      port@3 shall contain endpoints.
 
     properties:
-      '#address-cells':
-        const: 1
-
-      '#size-cells':
-        const: 0
-
       port@0:
-        type: object
+        $ref: /schemas/graph.yaml#/properties/port
         description: First LVDS input port
 
       port@1:
-        type: object
+        $ref: /schemas/graph.yaml#/properties/port
         description: Second LVDS input port
 
       port@2:
-        type: object
+        $ref: /schemas/graph.yaml#/properties/port
         description: First digital CMOS/TTL parallel output
 
       port@3:
-        type: object
+        $ref: /schemas/graph.yaml#/properties/port
         description: Second digital CMOS/TTL parallel output
 
     required:
       - port@0
       - port@2
 
-    additionalProperties: false
-
   oe-gpios:
     maxItems: 1
     description: Output enable GPIO signal, pin name "OE", active high.

Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.yaml

@@ -71,54 +71,26 @@ properties:
     description: See ../../pwm/pwm.yaml for description of the cell formats.
 
   ports:
-    type: object
+    $ref: /schemas/graph.yaml#/properties/ports
-    additionalProperties: false
 
     properties:
-      "#address-cells":
-        const: 1
-
-      "#size-cells":
-        const: 0
-
       port@0:
-        type: object
+        $ref: /schemas/graph.yaml#/properties/port
-        additionalProperties: false
-
         description:
           Video port for MIPI DSI input
 
-        properties:
-          reg:
-            const: 0
-
-          endpoint:
-            type: object
-            additionalProperties: false
-            properties:
-              remote-endpoint: true
-
-        required:
-          - reg
-
       port@1:
-        type: object
+        $ref: /schemas/graph.yaml#/$defs/port-base
-        additionalProperties: false
+        unevaluatedProperties: false
-
         description:
           Video port for eDP output (panel or connector).
 
         properties:
-          reg:
-            const: 1
-
           endpoint:
-            type: object
+            $ref: /schemas/graph.yaml#/$defs/endpoint-base
-            additionalProperties: false
+            unevaluatedProperties: false
 
             properties:
-              remote-endpoint: true
-
               data-lanes:
                 oneOf:
                   - minItems: 1
@@ -171,12 +143,7 @@ properties:
             dependencies:
               lane-polarities: [data-lanes]
 
-        required:
-          - reg
-
     required:
-      - "#address-cells"
-      - "#size-cells"
       - port@0
       - port@1
 

Documentation/devicetree/bindings/display/bridge/ti,tfp410.yaml

@@ -31,23 +31,18 @@ properties:
     maximum: 7
 
   ports:
-    description:
+    $ref: /schemas/graph.yaml#/properties/ports
-      A node containing input and output port nodes with endpoint
-      definitions as documented in
-      Documentation/devicetree/bindings/media/video-interfaces.txt
-    type: object
 
     properties:
       port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
         description: DPI input port.
-        type: object
 
         properties:
-          reg:
-            const: 0
-
           endpoint:
-            type: object
+            $ref: /schemas/graph.yaml#/$defs/endpoint-base
+            unevaluatedProperties: false
 
             properties:
               pclk-sample:
@@ -67,15 +62,8 @@ properties:
                 default: 24
 
       port@1:
+        $ref: /schemas/graph.yaml#/properties/port
         description: DVI output port.
-        type: object
-
-        properties:
-          reg:
-            const: 1
-
-          endpoint:
-            type: object
 
     required:
       - port@0

Documentation/devicetree/bindings/display/bridge/toshiba,tc358762.yaml

@@ -25,62 +25,20 @@ properties:
     description: Regulator for 1.2V internal core power.
 
   ports:
-    type: object
+    $ref: /schemas/graph.yaml#/properties/ports
 
     properties:
-      "#address-cells":
-        const: 1
-
-      "#size-cells":
-        const: 0
-
       port@0:
-        type: object
+        $ref: /schemas/graph.yaml#/properties/port
-        additionalProperties: false
+        description:
-
-        description: |
           Video port for MIPI DSI input
 
-        properties:
-          reg:
-            const: 0
-
-        patternProperties:
-          endpoint:
-            type: object
-            additionalProperties: false
-
-            properties:
-              remote-endpoint: true
-
-        required:
-          - reg
-
       port@1:
-        type: object
+        $ref: /schemas/graph.yaml#/properties/port
-        additionalProperties: false
+        description:
-
-        description: |
           Video port for MIPI DPI output (panel or connector).
 
-        properties:
-          reg:
-            const: 1
-
-        patternProperties:
-          endpoint:
-            type: object
-            additionalProperties: false
-
-            properties:
-              remote-endpoint: true
-
-        required:
-          - reg
-
     required:
-      - "#address-cells"
-      - "#size-cells"
       - port@0
       - port@1
 

Documentation/devicetree/bindings/display/bridge/toshiba,tc358768.yaml

@@ -42,65 +42,30 @@ properties:
     const: refclk
 
   ports:
-    type: object
+    $ref: /schemas/graph.yaml#/properties/ports
 
     properties:
-      "#address-cells":
-        const: 1
-
-      "#size-cells":
-        const: 0
-
       port@0:
-        type: object
+        $ref: /schemas/graph.yaml#/$defs/port-base
-        additionalProperties: false
+        unevaluatedProperties: false
-
         description: |
           Video port for RGB input
 
         properties:
-          reg:
-            const: 0
-
-        patternProperties:
           endpoint:
-            type: object
+            $ref: /schemas/graph.yaml#/$defs/endpoint-base
-            additionalProperties: false
+            unevaluatedProperties: false
 
             properties:
               data-lines:
                 enum: [ 16, 18, 24 ]
 
-              remote-endpoint: true
-
-        required:
-          - reg
-
       port@1:
-        type: object
+        $ref: /schemas/graph.yaml#/properties/port
-        additionalProperties: false
-
         description: |
           Video port for DSI output (panel or connector).
 
-        properties:
-          reg:
-            const: 1
-
-        patternProperties:
-          endpoint:
-            type: object
-            additionalProperties: false
-
-            properties:
-              remote-endpoint: true
-
-        required:
-          - reg
-
     required:
-      - "#address-cells"
-      - "#size-cells"
       - port@0
       - port@1
 
@@ -156,4 +121,3 @@ examples:
         };
       };
     };
-    

Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.yaml

@@ -42,31 +42,22 @@ properties:
     description: Hardware reset, Low active
 
   ports:
-    type: object
+    $ref: /schemas/graph.yaml#/properties/ports
-    description:
+
-      A node containing input and output port nodes with endpoint definitions
-      as documented in
-      Documentation/devicetree/bindings/media/video-interfaces.txt
     properties:
-      "#address-cells":
-        const: 1
-
-      "#size-cells":
-        const: 0
-
       port@0:
-        type: object
+        $ref: /schemas/graph.yaml#/properties/port
         description: |
           DSI Input. The remote endpoint phandle should be a
           reference to a valid mipi_dsi_host device node.
 
       port@1:
-        type: object
+        $ref: /schemas/graph.yaml#/properties/port
         description: |
           Video port for LVDS output (panel or connector).
 
       port@2:
-        type: object
+        $ref: /schemas/graph.yaml#/properties/port
         description: |
           Video port for Dual link LVDS output (panel or connector).
 

Documentation/devicetree/bindings/display/connector/analog-tv-connector.yaml

@@ -25,6 +25,7 @@ properties:
     $ref: /schemas/types.yaml#/definitions/uint32
 
   port:
+    $ref: /schemas/graph.yaml#/properties/port
     description: Connection to controller providing analog TV signals
 
 required:

Documentation/devicetree/bindings/display/connector/dp-connector.yaml

@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/connector/dp-connector.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: DisplayPort Connector
+
+maintainers:
+  - Tomi Valkeinen <tomi.valkeinen@ti.com>
+
+properties:
+  compatible:
+    const: dp-connector
+
+  label: true
+
+  type:
+    enum:
+      - full-size
+      - mini
+
+  hpd-gpios:
+    description: A GPIO line connected to HPD
+    maxItems: 1
+
+  dp-pwr-supply:
+    description: Power supply for the DP_PWR pin
+    maxItems: 1
+
+  port:
+    $ref: /schemas/graph.yaml#/properties/port
+    description: Connection to controller providing DP signals
+
+required:
+  - compatible
+  - type
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    connector {
+        compatible = "dp-connector";
+        label = "dp0";
+        type = "full-size";
+
+        port {
+            dp_connector_in: endpoint {
+                remote-endpoint = <&dp_out>;
+            };
+        };
+    };
+
+...

Documentation/devicetree/bindings/display/connector/dvi-connector.yaml

@@ -36,6 +36,7 @@ properties:
     description: the connector has pins for DVI dual-link
 
   port:
+    $ref: /schemas/graph.yaml#/properties/port
     description: Connection to controller providing DVI signals
 
 required:

Documentation/devicetree/bindings/display/connector/hdmi-connector.yaml

@@ -37,6 +37,7 @@ properties:
     maxItems: 1
 
   port:
+    $ref: /schemas/graph.yaml#/properties/port
     description: Connection to controller providing HDMI signals
 
 required:

Documentation/devicetree/bindings/display/connector/vga-connector.yaml

@@ -20,6 +20,7 @@ properties:
     $ref: /schemas/types.yaml#/definitions/phandle
 
   port:
+    $ref: /schemas/graph.yaml#/properties/port
     description: Connection to controller providing VGA signals
 
 required:

Documentation/devicetree/bindings/display/imx/nxp,imx8mq-dcss.yaml

@@ -74,7 +74,7 @@ properties:
       - description: Must be 400 MHz
 
   port:
-    type: object
+    $ref: /schemas/graph.yaml#/properties/port
     description:
       A port node pointing to the input port of a HDMI/DP or MIPI display bridge.
 

Documentation/devicetree/bindings/display/ingenic,ipu.yaml

@@ -31,9 +31,8 @@ properties:
   clock-names:
     const: ipu
 
-patternProperties:
+  port:
-  "^ports?$":
+    $ref: /schemas/graph.yaml#/properties/port
-    description: OF graph bindings (specified in bindings/graph.txt).
 
 required:
   - compatible

Documentation/devicetree/bindings/display/ingenic,lcd.yaml

@@ -39,18 +39,18 @@ properties:
     minItems: 1
 
   port:
-    description: OF graph bindings (specified in bindings/graph.txt).
+    $ref: /schemas/graph.yaml#/properties/port
 
   ports:
-    description: OF graph bindings (specified in bindings/graph.txt).
+    $ref: /schemas/graph.yaml#/properties/ports
-    type: object
+
     properties:
       port@0:
-        type: object
+        $ref: /schemas/graph.yaml#/properties/port
         description: DPI output, to interface with TFT panels.
 
       port@8:
-        type: object
+        $ref: /schemas/graph.yaml#/properties/port
         description: Link to the Image Processing Unit (IPU).
           (See ingenic,ipu.yaml).
 

Documentation/devicetree/bindings/display/intel,keembay-display.yaml

@@ -36,7 +36,7 @@ properties:
     maxItems: 1
 
   port:
-    type: object
+    $ref: /schemas/graph.yaml#/properties/port
     description: Display output node to DSI.
 
 required:

Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt

@@ -37,13 +37,14 @@ Required properties (all function blocks):
 	"mediatek,<chip>-disp-aal"   		- adaptive ambient light controller
 	"mediatek,<chip>-disp-gamma" 		- gamma correction
 	"mediatek,<chip>-disp-merge" 		- merge streams from two RDMA sources
+	"mediatek,<chip>-disp-postmask" 	- control round corner for display frame
 	"mediatek,<chip>-disp-split" 		- split stream to two encoders
 	"mediatek,<chip>-disp-ufoe"  		- data compression engine
 	"mediatek,<chip>-dsi"        		- DSI controller, see mediatek,dsi.txt
 	"mediatek,<chip>-dpi"        		- DPI controller, see mediatek,dpi.txt
 	"mediatek,<chip>-disp-mutex" 		- display mutex
 	"mediatek,<chip>-disp-od"    		- overdrive
-  the supported chips are mt2701, mt7623, mt2712, mt8167 and mt8173.
+  the supported chips are mt2701, mt7623, mt2712, mt8167, mt8173, mt8183 and mt8192.
 - reg: Physical base address and length of the function block register space
 - interrupts: The interrupt signal from the function block (required, except for
   merge and split function blocks).
@@ -66,6 +67,14 @@ Required properties (DMA function blocks):
   argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.txt
   for details.
 
+Optional properties (RDMA function blocks):
+- mediatek,rdma-fifo-size: rdma fifo size may be different even in same SOC, add this
+  property to the corresponding rdma
+  the value is the Max value which defined in hardware data sheet.
+  mediatek,rdma-fifo-size of mt8173-rdma0 is 8K
+  mediatek,rdma-fifo-size of mt8183-rdma0 is 5K
+  mediatek,rdma-fifo-size of mt8183-rdma1 is 2K
+
 Examples:
 
 mmsys: clock-controller@14000000 {
@@ -103,6 +112,7 @@ rdma0: rdma@1400e000 {
 	clocks = <&mmsys CLK_MM_DISP_RDMA0>;
 	iommus = <&iommu M4U_PORT_DISP_RDMA0>;
 	mediatek,larb = <&larb0>;
+	mediatek,rdma-fifosize = <8192>;
 };
 
 rdma1: rdma@1400f000 {

Documentation/devicetree/bindings/display/panel/advantech,idk-2121wr.yaml

@@ -37,34 +37,33 @@ properties:
   panel-timing: true
 
   ports:
-    type: object
+    $ref: /schemas/graph.yaml#/properties/ports
+
     properties:
       port@0:
-        type: object
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
         description: The sink for odd pixels.
         properties:
-          reg:
-            const: 0
-
           dual-lvds-odd-pixels: true
 
         required:
-          - reg
           - dual-lvds-odd-pixels
 
       port@1:
-        type: object
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
         description: The sink for even pixels.
         properties:
-          reg:
-            const: 1
-
           dual-lvds-even-pixels: true
 
         required:
-          - reg
           - dual-lvds-even-pixels
 
+    required:
+      - port@0
+      - port@1
+
 additionalProperties: false
 
 required:

Documentation/devicetree/bindings/display/panel/mantix,mlaf057we51-x.yaml

@@ -20,6 +20,7 @@ properties:
   compatible:
     enum:
       - mantix,mlaf057we51-x
+      - ys,ys57pss36bh5gq
 
   port: true
   reg:

Documentation/devicetree/bindings/display/panel/panel-common.yaml

@@ -68,16 +68,7 @@ properties:
 
   # Connectivity
   port:
-    type: object
+    $ref: /schemas/graph.yaml#/properties/port
-
-  ports:
-    type: object
-    description:
-      Panels receive video data through one or multiple connections. While
-      the nature of those connections is specific to the panel type, the
-      connectivity is expressed in a standard fashion using ports as specified
-      in the device graph bindings defined in
-      Documentation/devicetree/bindings/graph.txt.
 
   ddc-i2c-bus:
     $ref: /schemas/types.yaml#/definitions/phandle

Documentation/devicetree/bindings/display/panel/panel-simple-dsi.yaml

@@ -35,6 +35,8 @@ properties:
       - boe,tv080wum-nl0
         # Innolux P079ZCA 7.85" 768x1024 TFT LCD panel
       - innolux,p079zca
+        # Khadas TS050 5" 1080x1920 LCD panel
+      - khadas,ts050
         # Kingdisplay KD097D04 9.7" 1536x2048 TFT LCD panel
       - kingdisplay,kd097d04
         # LG ACX467AKM-7 4.95" 1080×1920 LCD Panel

Documentation/devicetree/bindings/display/panel/panel-simple.yaml

@@ -76,6 +76,8 @@ properties:
         # BOE OPTOELECTRONICS TECHNOLOGY 10.1" WXGA TFT LCD panel
       - boe,nv101wxmn51
         # BOE NV133FHM-N61 13.3" FHD (1920x1080) TFT LCD Panel
+      - boe,nv110wtm-n61
+        # BOE NV110WTM-N61 11.0" 2160x1440 TFT LCD Panel
       - boe,nv133fhm-n61
         # BOE NV133FHM-N62 13.3" FHD (1920x1080) TFT LCD Panel
       - boe,nv133fhm-n62

Documentation/devicetree/bindings/display/panel/samsung,s6e63m0.yaml

@@ -11,6 +11,7 @@ maintainers:
 
 allOf:
   - $ref: panel-common.yaml#
+  - $ref: /schemas/leds/backlight/common.yaml#
 
 properties:
   compatible:
@@ -19,6 +20,8 @@ properties:
   reg: true
   reset-gpios: true
   port: true
+  default-brightness: true
+  max-brightness: true
 
   vdd3-supply:
     description: VDD regulator
@@ -31,7 +34,6 @@ required:
   - reset-gpios
   - vdd3-supply
   - vci-supply
-  - port
 
 unevaluatedProperties: false
 

Documentation/devicetree/bindings/display/rockchip/rockchip,rk3066-hdmi.yaml

@@ -43,34 +43,24 @@ properties:
       This soc uses GRF regs to switch the HDMI TX input between vop0 and vop1.
 
   ports:
-    type: object
+    $ref: /schemas/graph.yaml#/properties/ports
 
     properties:
-      "#address-cells":
-        const: 1
-
-      "#size-cells":
-        const: 0
-
       port@0:
-        type: object
+        $ref: /schemas/graph.yaml#/properties/port
         description:
           Port node with two endpoints, numbered 0 and 1,
           connected respectively to vop0 and vop1.
 
       port@1:
-        type: object
+        $ref: /schemas/graph.yaml#/properties/port
         description:
           Port node with one endpoint connected to a hdmi-connector node.
 
     required:
-      - "#address-cells"
-      - "#size-cells"
       - port@0
       - port@1
 
-    additionalProperties: false
-
 required:
   - compatible
   - reg

Documentation/devicetree/bindings/display/rockchip/rockchip-vop.yaml

@@ -70,10 +70,7 @@ properties:
       - const: dclk
 
   port:
-    type: object
+    $ref: /schemas/graph.yaml#/properties/port
-    description:
-      A port node with endpoint definitions as defined in
-      Documentation/devicetree/bindings/media/video-interfaces.txt.
 
   assigned-clocks:
     maxItems: 2

Documentation/devicetree/bindings/display/st,stm32-dsi.yaml

@@ -51,20 +51,16 @@ properties:
       Phandle of the regulator that provides the supply voltage.
 
   ports:
-    type: object
+    $ref: /schemas/graph.yaml#/properties/ports
-    description:
+
-      A node containing DSI input & output port nodes with endpoint
-      definitions as documented in
-      Documentation/devicetree/bindings/media/video-interfaces.txt
-      Documentation/devicetree/bindings/graph.txt
     properties:
       port@0:
-        type: object
+        $ref: /schemas/graph.yaml#/properties/port
         description:
           DSI input port node, connected to the ltdc rgb output port.
 
       port@1:
-        type: object
+        $ref: /schemas/graph.yaml#/properties/port
         description:
           DSI output port node, connected to a panel or a bridge input port"
 

Documentation/devicetree/bindings/display/st,stm32-ltdc.yaml

@@ -35,15 +35,13 @@ properties:
     maxItems: 1
 
   port:
-    type: object
+    $ref: /schemas/graph.yaml#/properties/port
-    description:
+    description: |
-      "Video port for DPI RGB output.
+      Video port for DPI RGB output.
       ltdc has one video port with up to 2 endpoints:
       - for external dpi rgb panel or bridge, using gpios.
       - for internal dpi input of the MIPI DSI host controller.
       Note: These 2 endpoints cannot be activated simultaneously.
-      Please refer to the bindings defined in
-      Documentation/devicetree/bindings/media/video-interfaces.txt."
 
 required:
   - compatible

Documentation/devicetree/bindings/display/ste,mcde.txt

@@ -1,104 +0,0 @@
-ST-Ericsson Multi Channel Display Engine MCDE
-
-The ST-Ericsson MCDE is a display controller with support for compositing
-and displaying several channels memory resident graphics data on DSI or
-LCD displays or bridges. It is used in the ST-Ericsson U8500 platform.
-
-Required properties:
-
-- compatible: must be:
-  "ste,mcde"
-- reg: register base for the main MCDE control registers, should be
-  0x1000 in size
-- interrupts: the interrupt line for the MCDE
-- epod-supply: a phandle to the EPOD regulator
-- vana-supply: a phandle to the analog voltage regulator
-- clocks: an array of the MCDE clocks in this strict order:
-  MCDECLK (main MCDE clock), LCDCLK (LCD clock), PLLDSI
-  (HDMI clock), DSI0ESCLK (DSI0 energy save clock),
-  DSI1ESCLK (DSI1 energy save clock), DSI2ESCLK (DSI2 energy
-  save clock)
-- clock-names: must be the following array:
-  "mcde", "lcd", "hdmi"
-  to match the required clock inputs above.
-- #address-cells: should be <1> (for the DSI hosts that will be children)
-- #size-cells: should be <1> (for the DSI hosts that will be children)
-- ranges: this should always be stated
-
-Required subnodes:
-
-The devicetree must specify subnodes for the DSI host adapters.
-These must have the following characteristics:
-
-- compatible: must be:
-  "ste,mcde-dsi"
-- reg: must specify the register range for the DSI host
-- vana-supply: phandle to the VANA voltage regulator
-- clocks: phandles to the high speed and low power (energy save) clocks
-  the high speed clock is not present on the third (dsi2) block, so it
-  should only have the "lp" clock
-- clock-names: "hs" for the high speed clock and "lp" for the low power
-  (energy save) clock
-- #address-cells: should be <1>
-- #size-cells: should be <0>
-
-Display panels and bridges will appear as children on the DSI hosts, and
-the displays are connected to the DSI hosts using the common binding
-for video transmitter interfaces; see
-Documentation/devicetree/bindings/media/video-interfaces.txt
-
-If a DSI host is unused (not connected) it will have no children defined.
-
-Example:
-
-mcde@a0350000 {
-	compatible = "ste,mcde";
-	reg = <0xa0350000 0x1000>;
-	interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
-	epod-supply = <&db8500_b2r2_mcde_reg>;
-	vana-supply = <&ab8500_ldo_ana_reg>;
-	clocks = <&prcmu_clk PRCMU_MCDECLK>, /* Main MCDE clock */
-		 <&prcmu_clk PRCMU_LCDCLK>, /* LCD clock */
-		 <&prcmu_clk PRCMU_PLLDSI>; /* HDMI clock */
-	clock-names = "mcde", "lcd", "hdmi";
-	#address-cells = <1>;
-	#size-cells = <1>;
-	ranges;
-
-	dsi0: dsi@a0351000 {
-		compatible = "ste,mcde-dsi";
-		reg = <0xa0351000 0x1000>;
-		vana-supply = <&ab8500_ldo_ana_reg>;
-		clocks = <&prcmu_clk PRCMU_DSI0CLK>, <&prcmu_clk PRCMU_DSI0ESCCLK>;
-		clock-names = "hs", "lp";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		panel {
-			compatible = "samsung,s6d16d0";
-			reg = <0>;
-			vdd1-supply = <&ab8500_ldo_aux1_reg>;
-			reset-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
-		};
-
-	};
-	dsi1: dsi@a0352000 {
-		compatible = "ste,mcde-dsi";
-		reg = <0xa0352000 0x1000>;
-		vana-supply = <&ab8500_ldo_ana_reg>;
-		clocks = <&prcmu_clk PRCMU_DSI1CLK>, <&prcmu_clk PRCMU_DSI1ESCCLK>;
-		clock-names = "hs", "lp";
-		#address-cells = <1>;
-		#size-cells = <0>;
-	};
-	dsi2: dsi@a0353000 {
-		compatible = "ste,mcde-dsi";
-		reg = <0xa0353000 0x1000>;
-		vana-supply = <&ab8500_ldo_ana_reg>;
-		/* This DSI port only has the Low Power / Energy Save clock */
-		clocks = <&prcmu_clk PRCMU_DSI2ESCCLK>;
-		clock-names = "lp";
-		#address-cells = <1>;
-		#size-cells = <0>;
-	};
-};

Documentation/devicetree/bindings/display/ste,mcde.yaml

@@ -0,0 +1,168 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/ste,mcde.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ST-Ericsson Multi Channel Display Engine MCDE
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+properties:
+  compatible:
+    const: ste,mcde
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    description: an array of the MCDE clocks
+    items:
+      - description: MCDECLK (main MCDE clock)
+      - description: LCDCLK (LCD clock)
+      - description: PLLDSI (HDMI clock)
+
+  clock-names:
+    items:
+      - const: mcde
+      - const: lcd
+      - const: hdmi
+
+  resets:
+    maxItems: 1
+
+  epod-supply:
+    description: a phandle to the EPOD regulator
+
+  vana-supply:
+    description: a phandle to the analog voltage regulator
+
+  port:
+    $ref: /schemas/graph.yaml#/properties/port
+    description:
+      A DPI port node
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+  ranges: true
+
+patternProperties:
+  "^dsi@[0-9a-f]+$":
+    description: subnodes for the three DSI host adapters
+    type: object
+    allOf:
+      - $ref: dsi-controller.yaml#
+    properties:
+      compatible:
+        const: ste,mcde-dsi
+
+      reg:
+        maxItems: 1
+
+      vana-supply:
+        description: a phandle to the analog voltage regulator
+
+      clocks:
+        description: phandles to the high speed and low power (energy save) clocks
+          the high speed clock is not present on the third (dsi2) block, so it
+          should only have the "lp" clock
+        minItems: 1
+        maxItems: 2
+
+      clock-names:
+        oneOf:
+          - items:
+              - const: hs
+              - const: lp
+          - items:
+              - const: lp
+
+    required:
+      - compatible
+      - reg
+      - vana-supply
+      - clocks
+      - clock-names
+
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - epod-supply
+  - vana-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/mfd/dbx500-prcmu.h>
+    #include <dt-bindings/gpio/gpio.h>
+
+    mcde@a0350000 {
+      compatible = "ste,mcde";
+      reg = <0xa0350000 0x1000>;
+      interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+      epod-supply = <&db8500_b2r2_mcde_reg>;
+      vana-supply = <&ab8500_ldo_ana_reg>;
+      clocks = <&prcmu_clk PRCMU_MCDECLK>,
+               <&prcmu_clk PRCMU_LCDCLK>,
+               <&prcmu_clk PRCMU_PLLDSI>;
+      clock-names = "mcde", "lcd", "hdmi";
+      #address-cells = <1>;
+      #size-cells = <1>;
+      ranges;
+
+      dsi0: dsi@a0351000 {
+        compatible = "ste,mcde-dsi";
+        reg = <0xa0351000 0x1000>;
+        vana-supply = <&ab8500_ldo_ana_reg>;
+        clocks = <&prcmu_clk PRCMU_DSI0CLK>, <&prcmu_clk PRCMU_DSI0ESCCLK>;
+        clock-names = "hs", "lp";
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+          compatible = "samsung,s6d16d0";
+          reg = <0>;
+          vdd1-supply = <&ab8500_ldo_aux1_reg>;
+          reset-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+        };
+      };
+
+      dsi1: dsi@a0352000 {
+        compatible = "ste,mcde-dsi";
+        reg = <0xa0352000 0x1000>;
+        vana-supply = <&ab8500_ldo_ana_reg>;
+        clocks = <&prcmu_clk PRCMU_DSI1CLK>, <&prcmu_clk PRCMU_DSI1ESCCLK>;
+        clock-names = "hs", "lp";
+        #address-cells = <1>;
+        #size-cells = <0>;
+      };
+
+      dsi2: dsi@a0353000 {
+        compatible = "ste,mcde-dsi";
+        reg = <0xa0353000 0x1000>;
+        vana-supply = <&ab8500_ldo_ana_reg>;
+        /* This DSI port only has the Low Power / Energy Save clock */
+        clocks = <&prcmu_clk PRCMU_DSI2ESCCLK>;
+        clock-names = "lp";
+        #address-cells = <1>;
+        #size-cells = <0>;
+      };
+    };
+
+...

Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml

@@ -74,30 +74,19 @@ properties:
     type: boolean
 
   ports:
-    type: object
+    $ref: /schemas/graph.yaml#/properties/ports
-    description:
+
-      Ports as described in Documentation/devicetree/bindings/graph.txt
     properties:
-      "#address-cells":
-        const: 1
-
-      "#size-cells":
-        const: 0
-
       port@0:
-        type: object
+        $ref: /schemas/graph.yaml#/properties/port
         description:
           The DSS OLDI output port node form video port 1
 
       port@1:
-        type: object
+        $ref: /schemas/graph.yaml#/properties/port
         description:
           The DSS DPI output port node from video port 2
 
-    required:
-      - "#address-cells"
-      - "#size-cells"
-
   ti,am65x-oldi-io-ctrl:
     $ref: "/schemas/types.yaml#/definitions/phandle-array"
     maxItems: 1

Documentation/devicetree/bindings/display/ti/ti,j721e-dss.yaml

@@ -107,40 +107,29 @@ properties:
     type: boolean
 
   ports:
-    type: object
+    $ref: /schemas/graph.yaml#/properties/ports
-    description:
+
-      Ports as described in Documentation/devicetree/bindings/graph.txt
     properties:
-      "#address-cells":
-        const: 1
-
-      "#size-cells":
-        const: 0
-
       port@0:
-        type: object
+        $ref: /schemas/graph.yaml#/properties/port
         description:
           The output port node form video port 1
 
       port@1:
-        type: object
+        $ref: /schemas/graph.yaml#/properties/port
         description:
           The output port node from video port 2
 
       port@2:
-        type: object
+        $ref: /schemas/graph.yaml#/properties/port
         description:
           The output port node from video port 3
 
       port@3:
-        type: object
+        $ref: /schemas/graph.yaml#/properties/port
         description:
           The output port node from video port 4
 
-    required:
-      - "#address-cells"
-      - "#size-cells"
-
   max-memory-bandwidth:
     $ref: /schemas/types.yaml#/definitions/uint32
     description:

Documentation/devicetree/bindings/display/ti/ti,k2g-dss.yaml

@@ -54,9 +54,8 @@ properties:
     description: phandle to the associated power domain
 
   port:
-    type: object
+    $ref: /schemas/graph.yaml#/properties/port
     description:
-      Port as described in Documentation/devicetree/bindings/graph.txt.
       The DSS DPI output port node
 
   max-memory-bandwidth:

Documentation/devicetree/bindings/vendor-prefixes.yaml

@@ -1272,6 +1272,8 @@ patternProperties:
     description: YSH & ATIL
   "^yones-toptech,.*":
     description: Yones Toptech Co., Ltd.
+  "^ys,.*":
+    description: Shenzhen Yashi Changhua Intelligent Technology Co., Ltd.
   "^ysoft,.*":
     description: Y Soft Corporation a.s.
   "^zealz,.*":

Documentation/gpu/drm-kms.rst

@@ -319,6 +319,15 @@ CRTC Functions Reference
 .. kernel-doc:: drivers/gpu/drm/drm_crtc.c
    :export:
 
+Color Management Functions Reference
+------------------------------------
+
+.. kernel-doc:: drivers/gpu/drm/drm_color_mgmt.c
+   :export:
+
+.. kernel-doc:: include/drm/drm_color_mgmt.h
+   :internal:
+
 Frame Buffer Abstraction
 ========================
 
@@ -370,6 +379,21 @@ Plane Functions Reference
 .. kernel-doc:: drivers/gpu/drm/drm_plane.c
    :export:
 
+Plane Composition Functions Reference
+-------------------------------------
+
+.. kernel-doc:: drivers/gpu/drm/drm_blend.c
+   :export:
+
+Plane Damage Tracking Functions Reference
+-----------------------------------------
+
+.. kernel-doc:: drivers/gpu/drm/drm_damage_helper.c
+   :export:
+
+.. kernel-doc:: include/drm/drm_damage_helper.h
+   :internal:
+
 Display Modes Function Reference
 ================================
 
@@ -436,6 +460,9 @@ KMS Locking
 KMS Properties
 ==============
 
+This section of the documentation is primarily aimed at user-space developers.
+For the driver APIs, see the other sections.
+
 Property Types and Blob Property Support
 ----------------------------------------
 
@@ -466,39 +493,30 @@ Standard CRTC Properties
 .. kernel-doc:: drivers/gpu/drm/drm_crtc.c
    :doc: standard CRTC properties
 
+Standard Plane Properties
+-------------------------
+
+.. kernel-doc:: drivers/gpu/drm/drm_plane.c
+   :doc: standard plane properties
+
 Plane Composition Properties
 ----------------------------
 
 .. kernel-doc:: drivers/gpu/drm/drm_blend.c
    :doc: overview
 
-.. kernel-doc:: drivers/gpu/drm/drm_blend.c
+Damage Tracking Properties
-   :export:
+--------------------------
-
-FB_DAMAGE_CLIPS
-~~~~~~~~~~~~~~~
 
 .. kernel-doc:: drivers/gpu/drm/drm_damage_helper.c
    :doc: overview
 
-.. kernel-doc:: drivers/gpu/drm/drm_damage_helper.c
-   :export:
-
-.. kernel-doc:: include/drm/drm_damage_helper.h
-   :internal:
-
 Color Management Properties
 ---------------------------
 
 .. kernel-doc:: drivers/gpu/drm/drm_color_mgmt.c
    :doc: overview
 
-.. kernel-doc:: drivers/gpu/drm/drm_color_mgmt.c
-   :export:
-
-.. kernel-doc:: include/drm/drm_color_mgmt.h
-   :internal:
-
 Tile Group Property
 -------------------
 

Documentation/gpu/drm-uapi.rst

@@ -457,5 +457,8 @@ Userspace API Structures
 .. kernel-doc:: include/uapi/drm/drm_mode.h
    :doc: overview
 
+.. kernel-doc:: include/uapi/drm/drm.h
+   :internal:
+
 .. kernel-doc:: include/uapi/drm/drm_mode.h
    :internal:

Documentation/gpu/i915.rst

@@ -428,7 +428,7 @@ User Batchbuffer Execution
 Logical Rings, Logical Ring Contexts and Execlists
 --------------------------------------------------
 
-.. kernel-doc:: drivers/gpu/drm/i915/gt/intel_lrc.c
+.. kernel-doc:: drivers/gpu/drm/i915/gt/intel_execlists_submission.c
    :doc: Logical Rings, Logical Ring Contexts and Execlists
 
 Global GTT views

Documentation/gpu/todo.rst

@@ -23,6 +23,9 @@ Advanced: Tricky tasks that need fairly good understanding of the DRM subsystem
 and graphics topics. Generally need the relevant hardware for development and
 testing.
 
+Expert: Only attempt these if you've successfully completed some tricky
+refactorings already and are an expert in the specific area
+
 Subsystem-wide refactorings
 ===========================
 
@@ -168,6 +171,22 @@ Contact: Daniel Vetter, respective driver maintainers
 
 Level: Advanced
 
+Move Buffer Object Locking to dma_resv_lock()
+---------------------------------------------
+
+Many drivers have their own per-object locking scheme, usually using
+mutex_lock(). This causes all kinds of trouble for buffer sharing, since
+depending which driver is the exporter and importer, the locking hierarchy is
+reversed.
+
+To solve this we need one standard per-object locking mechanism, which is
+dma_resv_lock(). This lock needs to be called as the outermost lock, with all
+other driver specific per-object locks removed. The problem is tha rolling out
+the actual change to the locking contract is a flag day, due to struct dma_buf
+buffer sharing.
+
+Level: Expert
+
 Convert logging to drm_* functions with drm_device paramater
 ------------------------------------------------------------
 

Documentation/gpu/vkms.rst

@@ -7,6 +7,88 @@
 .. kernel-doc:: drivers/gpu/drm/vkms/vkms_drv.c
    :doc: vkms (Virtual Kernel Modesetting)
 
+Setup
+=====
+
+The VKMS driver can be setup with the following steps:
+
+To check if VKMS is loaded, run::
+
+  lsmod | grep vkms
+
+This should list the VKMS driver. If no output is obtained, then
+you need to enable and/or load the VKMS driver.
+Ensure that the VKMS driver has been set as a loadable module in your
+kernel config file. Do::
+
+  make nconfig
+
+  Go to `Device Drivers> Graphics support`
+
+  Enable `Virtual KMS (EXPERIMENTAL)`
+
+Compile and build the kernel for the changes to get reflected.
+Now, to load the driver, use::
+
+  sudo modprobe vkms
+
+On running the lsmod command now, the VKMS driver will appear listed.
+You can also observe the driver being loaded in the dmesg logs.
+
+The VKMS driver has optional features to simulate different kinds of hardware,
+which are exposed as module options. You can use the `modinfo` command
+to see the module options for vkms::
+
+  modinfo vkms
+
+Module options are helpful when testing, and enabling modules
+can be done while loading vkms. For example, to load vkms with cursor enabled,
+use::
+
+  sudo modprobe vkms enable_cursor=1
+
+To disable the driver, use ::
+
+  sudo modprobe -r vkms
+
+Testing With IGT
+================
+
+The IGT GPU Tools is a test suite used specifically for debugging and
+development of the DRM drivers.
+The IGT Tools can be installed from
+`here <https://gitlab.freedesktop.org/drm/igt-gpu-tools>`_ .
+
+The tests need to be run without a compositor, so you need to switch to text
+only mode. You can do this by::
+
+  sudo systemctl isolate multi-user.target
+
+To return to graphical mode, do::
+
+  sudo systemctl isolate graphical.target
+
+Once you are in text only mode, you can run tests using the --device switch
+or IGT_DEVICE variable to specify the device filter for the driver we want
+to test. IGT_DEVICE can also be used with the run-test.sh script to run the
+tests for a specific driver::
+
+  sudo ./build/tests/<name of test> --device "sys:/sys/devices/platform/vkms"
+  sudo IGT_DEVICE="sys:/sys/devices/platform/vkms" ./build/tests/<name of test>
+  sudo IGT_DEVICE="sys:/sys/devices/platform/vkms" ./scripts/run-tests.sh -t <name of test>
+
+For example, to test the functionality of the writeback library,
+we can run the kms_writeback test::
+
+  sudo ./build/tests/kms_writeback --device "sys:/sys/devices/platform/vkms"
+  sudo IGT_DEVICE="sys:/sys/devices/platform/vkms" ./build/tests/kms_writeback
+  sudo IGT_DEVICE="sys:/sys/devices/platform/vkms" ./scripts/run-tests.sh -t kms_writeback
+
+You can also run subtests if you do not want to run the entire test::
+
+  sudo ./build/tests/kms_flip --run-subtest basic-plain-flip --device "sys:/sys/devices/platform/vkms"
+  sudo IGT_DEVICE="sys:/sys/devices/platform/vkms" ./build/tests/kms_flip --run-subtest basic-plain-flip
+
 TODO
 ====
 

MAINTAINERS

@@ -5760,6 +5760,7 @@ F:	drivers/gpu/drm/vboxvideo/
 DRM DRIVER FOR VMWARE VIRTUAL GPU
 M:	"VMware Graphics" <linux-graphics-maintainer@vmware.com>
 M:	Roland Scheidegger <sroland@vmware.com>
+M:	Zack Rusin <zackr@vmware.com>
 L:	dri-devel@lists.freedesktop.org
 S:	Supported
 T:	git git://people.freedesktop.org/~sroland/linux
@@ -5961,8 +5962,8 @@ F:	Documentation/devicetree/bindings/display/st,stm32-ltdc.yaml
 F:	drivers/gpu/drm/stm
 
 DRM DRIVERS FOR TI KEYSTONE
-M:	Jyri Sarha <jsarha@ti.com>
+M:	Jyri Sarha <jyri.sarha@iki.fi>
-M:	Tomi Valkeinen <tomi.valkeinen@ti.com>
+M:	Tomi Valkeinen <tomba@kernel.org>
 L:	dri-devel@lists.freedesktop.org
 S:	Maintained
 T:	git git://anongit.freedesktop.org/drm/drm-misc
@@ -5972,15 +5973,15 @@ F:	Documentation/devicetree/bindings/display/ti/ti,k2g-dss.yaml
 F:	drivers/gpu/drm/tidss/
 
 DRM DRIVERS FOR TI LCDC
-M:	Jyri Sarha <jsarha@ti.com>
+M:	Jyri Sarha <jyri.sarha@iki.fi>
-R:	Tomi Valkeinen <tomi.valkeinen@ti.com>
+R:	Tomi Valkeinen <tomba@kernel.org>
 L:	dri-devel@lists.freedesktop.org
 S:	Maintained
 F:	Documentation/devicetree/bindings/display/tilcdc/
 F:	drivers/gpu/drm/tilcdc/
 
 DRM DRIVERS FOR TI OMAP
-M:	Tomi Valkeinen <tomi.valkeinen@ti.com>
+M:	Tomi Valkeinen <tomba@kernel.org>
 L:	dri-devel@lists.freedesktop.org
 S:	Maintained
 F:	Documentation/devicetree/bindings/display/ti/

arch/arm/boot/dts/omap5.dtsi

@@ -518,6 +518,9 @@
 						clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>,
 							 <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 10>;
 						clock-names = "fck", "sys_clk";
+
+						#address-cells = <1>;
+						#size-cells = <0>;
 					};
 				};
 
@@ -550,6 +553,9 @@
 						clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>,
 							 <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 10>;
 						clock-names = "fck", "sys_clk";
+
+						#address-cells = <1>;
+						#size-cells = <0>;
 					};
 				};
 

arch/arm/configs/omap2plus_defconfig

@@ -356,8 +356,8 @@ CONFIG_DRM_OMAP=m
 CONFIG_OMAP5_DSS_HDMI=y
 CONFIG_OMAP2_DSS_SDI=y
 CONFIG_OMAP2_DSS_DSI=y
-CONFIG_DRM_OMAP_PANEL_DSI_CM=m
 CONFIG_DRM_TILCDC=m
+CONFIG_DRM_PANEL_DSI_CM=m
 CONFIG_DRM_PANEL_SIMPLE=m
 CONFIG_DRM_PANEL_LG_LB035Q02=m
 CONFIG_DRM_PANEL_NEC_NL8048HL11=m

drivers/dma-buf/Kconfig

@@ -50,6 +50,14 @@ config DMABUF_MOVE_NOTIFY
 	  This is marked experimental because we don't yet have a consistent
 	  execution context and memory management between drivers.
 
+config DMABUF_DEBUG
+	bool "DMA-BUF debug checks"
+	default y if DMA_API_DEBUG
+	help
+	  This option enables additional checks for DMA-BUF importers and
+	  exporters. Specifically it validates that importers do not peek at the
+	  underlying struct page when they import a buffer.
+
 config DMABUF_SELFTESTS
 	tristate "Selftests for the dma-buf interfaces"
 	default n

drivers/dma-buf/dma-buf.c

@@ -493,7 +493,7 @@ err_alloc_file:
  *
  * 4. Once a driver is done with a shared buffer it needs to call
  *    dma_buf_detach() (after cleaning up any mappings) and then release the
- *    reference acquired with dma_buf_get by calling dma_buf_put().
+ *    reference acquired with dma_buf_get() by calling dma_buf_put().
  *
  * For the detailed semantics exporters are expected to implement see
  * &dma_buf_ops.
@@ -509,9 +509,10 @@ err_alloc_file:
  *			by the exporter. see &struct dma_buf_export_info
  *			for further details.
  *
- * Returns, on success, a newly created dma_buf object, which wraps the
+ * Returns, on success, a newly created struct dma_buf object, which wraps the
- * supplied private data and operations for dma_buf_ops. On either missing
+ * supplied private data and operations for struct dma_buf_ops. On either
- * ops, or error in allocating struct dma_buf, will return negative error.
+ * missing ops, or error in allocating struct dma_buf, will return negative
+ * error.
  *
  * For most cases the easiest way to create @exp_info is through the
  * %DEFINE_DMA_BUF_EXPORT_INFO macro.
@@ -597,7 +598,7 @@ err_module:
 EXPORT_SYMBOL_GPL(dma_buf_export);
 
 /**
- * dma_buf_fd - returns a file descriptor for the given dma_buf
+ * dma_buf_fd - returns a file descriptor for the given struct dma_buf
  * @dmabuf:	[in]	pointer to dma_buf for which fd is required.
  * @flags:      [in]    flags to give to fd
  *
@@ -621,10 +622,10 @@ int dma_buf_fd(struct dma_buf *dmabuf, int flags)
 EXPORT_SYMBOL_GPL(dma_buf_fd);
 
 /**
- * dma_buf_get - returns the dma_buf structure related to an fd
+ * dma_buf_get - returns the struct dma_buf related to an fd
- * @fd:	[in]	fd associated with the dma_buf to be returned
+ * @fd:	[in]	fd associated with the struct dma_buf to be returned
  *
- * On success, returns the dma_buf structure associated with an fd; uses
+ * On success, returns the struct dma_buf associated with an fd; uses
  * file's refcounting done by fget to increase refcount. returns ERR_PTR
  * otherwise.
  */
@@ -665,9 +666,36 @@ void dma_buf_put(struct dma_buf *dmabuf)
 }
 EXPORT_SYMBOL_GPL(dma_buf_put);
 
+static void mangle_sg_table(struct sg_table *sg_table)
+{
+#ifdef CONFIG_DMABUF_DEBUG
+	int i;
+	struct scatterlist *sg;
+
+	/* To catch abuse of the underlying struct page by importers mix
+	 * up the bits, but take care to preserve the low SG_ bits to
+	 * not corrupt the sgt. The mixing is undone in __unmap_dma_buf
+	 * before passing the sgt back to the exporter. */
+	for_each_sgtable_sg(sg_table, sg, i)
+		sg->page_link ^= ~0xffUL;
+#endif
+
+}
+static struct sg_table * __map_dma_buf(struct dma_buf_attachment *attach,
+				       enum dma_data_direction direction)
+{
+	struct sg_table *sg_table;
+
+	sg_table = attach->dmabuf->ops->map_dma_buf(attach, direction);
+
+	if (!IS_ERR_OR_NULL(sg_table))
+		mangle_sg_table(sg_table);
+
+	return sg_table;
+}
+
 /**
- * dma_buf_dynamic_attach - Add the device to dma_buf's attachments list; optionally,
+ * dma_buf_dynamic_attach - Add the device to dma_buf's attachments list
- * calls attach() of dma_buf_ops to allow device-specific attach functionality
  * @dmabuf:		[in]	buffer to attach device to.
  * @dev:		[in]	device to be attached.
  * @importer_ops:	[in]	importer operations for the attachment
@@ -676,6 +704,9 @@ EXPORT_SYMBOL_GPL(dma_buf_put);
  * Returns struct dma_buf_attachment pointer for this attachment. Attachments
  * must be cleaned up by calling dma_buf_detach().
  *
+ * Optionally this calls &dma_buf_ops.attach to allow device-specific attach
+ * functionality.
+ *
  * Returns:
  *
  * A pointer to newly created &dma_buf_attachment on success, or a negative
@@ -734,7 +765,7 @@ dma_buf_dynamic_attach(struct dma_buf *dmabuf, struct device *dev,
 				goto err_unlock;
 		}
 
-		sgt = dmabuf->ops->map_dma_buf(attach, DMA_BIDIRECTIONAL);
+		sgt = __map_dma_buf(attach, DMA_BIDIRECTIONAL);
 		if (!sgt)
 			sgt = ERR_PTR(-ENOMEM);
 		if (IS_ERR(sgt)) {
@@ -781,13 +812,24 @@ struct dma_buf_attachment *dma_buf_attach(struct dma_buf *dmabuf,
 }
 EXPORT_SYMBOL_GPL(dma_buf_attach);
 
+static void __unmap_dma_buf(struct dma_buf_attachment *attach,
+			    struct sg_table *sg_table,
+			    enum dma_data_direction direction)
+{
+	/* uses XOR, hence this unmangles */
+	mangle_sg_table(sg_table);
+
+	attach->dmabuf->ops->unmap_dma_buf(attach, sg_table, direction);
+}
+
 /**
- * dma_buf_detach - Remove the given attachment from dmabuf's attachments list;
+ * dma_buf_detach - Remove the given attachment from dmabuf's attachments list
- * optionally calls detach() of dma_buf_ops for device-specific detach
  * @dmabuf:	[in]	buffer to detach from.
  * @attach:	[in]	attachment to be detached; is free'd after this call.
  *
  * Clean up a device attachment obtained by calling dma_buf_attach().
+ *
+ * Optionally this calls &dma_buf_ops.detach for device-specific detach.
  */
 void dma_buf_detach(struct dma_buf *dmabuf, struct dma_buf_attachment *attach)
 {
@@ -798,7 +840,7 @@ void dma_buf_detach(struct dma_buf *dmabuf, struct dma_buf_attachment *attach)
 		if (dma_buf_is_dynamic(attach->dmabuf))
 			dma_resv_lock(attach->dmabuf->resv, NULL);
 
-		dmabuf->ops->unmap_dma_buf(attach, attach->sgt, attach->dir);
+		__unmap_dma_buf(attach, attach->sgt, attach->dir);
 
 		if (dma_buf_is_dynamic(attach->dmabuf)) {
 			dma_buf_unpin(attach);
@@ -818,9 +860,15 @@ EXPORT_SYMBOL_GPL(dma_buf_detach);
 
 /**
  * dma_buf_pin - Lock down the DMA-buf
- *
  * @attach:	[in]	attachment which should be pinned
  *
+ * Only dynamic importers (who set up @attach with dma_buf_dynamic_attach()) may
+ * call this, and only for limited use cases like scanout and not for temporary
+ * pin operations. It is not permitted to allow userspace to pin arbitrary
+ * amounts of buffers through this interface.
+ *
+ * Buffers must be unpinned by calling dma_buf_unpin().
+ *
  * Returns:
  * 0 on success, negative error code on failure.
  */
@@ -829,6 +877,8 @@ int dma_buf_pin(struct dma_buf_attachment *attach)
 	struct dma_buf *dmabuf = attach->dmabuf;
 	int ret = 0;
 
+	WARN_ON(!dma_buf_attachment_is_dynamic(attach));
+
 	dma_resv_assert_held(dmabuf->resv);
 
 	if (dmabuf->ops->pin)
@@ -839,14 +889,19 @@ int dma_buf_pin(struct dma_buf_attachment *attach)
 EXPORT_SYMBOL_GPL(dma_buf_pin);
 
 /**
- * dma_buf_unpin - Remove lock from DMA-buf
+ * dma_buf_unpin - Unpin a DMA-buf
- *
  * @attach:	[in]	attachment which should be unpinned
+ *
+ * This unpins a buffer pinned by dma_buf_pin() and allows the exporter to move
+ * any mapping of @attach again and inform the importer through
+ * &dma_buf_attach_ops.move_notify.
  */
 void dma_buf_unpin(struct dma_buf_attachment *attach)
 {
 	struct dma_buf *dmabuf = attach->dmabuf;
 
+	WARN_ON(!dma_buf_attachment_is_dynamic(attach));
+
 	dma_resv_assert_held(dmabuf->resv);
 
 	if (dmabuf->ops->unpin)
@@ -907,7 +962,7 @@ struct sg_table *dma_buf_map_attachment(struct dma_buf_attachment *attach,
 		}
 	}
 
-	sg_table = attach->dmabuf->ops->map_dma_buf(attach, direction);
+	sg_table = __map_dma_buf(attach, direction);
 	if (!sg_table)
 		sg_table = ERR_PTR(-ENOMEM);
 
@@ -970,7 +1025,7 @@ void dma_buf_unmap_attachment(struct dma_buf_attachment *attach,
 	if (dma_buf_is_dynamic(attach->dmabuf))
 		dma_resv_assert_held(attach->dmabuf->resv);
 
-	attach->dmabuf->ops->unmap_dma_buf(attach, sg_table, direction);
+	__unmap_dma_buf(attach, sg_table, direction);
 
 	if (dma_buf_is_dynamic(attach->dmabuf) &&
 	    !IS_ENABLED(CONFIG_DMABUF_MOVE_NOTIFY))
@@ -1014,15 +1069,15 @@ EXPORT_SYMBOL_GPL(dma_buf_move_notify);
  *   vmalloc space might be limited and result in vmap calls failing.
  *
  *   Interfaces::
+ *
  *      void \*dma_buf_vmap(struct dma_buf \*dmabuf)
  *      void dma_buf_vunmap(struct dma_buf \*dmabuf, void \*vaddr)
  *
  *   The vmap call can fail if there is no vmap support in the exporter, or if
- *   it runs out of vmalloc space. Fallback to kmap should be implemented. Note
+ *   it runs out of vmalloc space. Note that the dma-buf layer keeps a reference
- *   that the dma-buf layer keeps a reference count for all vmap access and
+ *   count for all vmap access and calls down into the exporter's vmap function
- *   calls down into the exporter's vmap function only when no vmapping exists,
+ *   only when no vmapping exists, and only unmaps it once. Protection against
- *   and only unmaps it once. Protection against concurrent vmap/vunmap calls is
+ *   concurrent vmap/vunmap calls is provided by taking the &dma_buf.lock mutex.
- *   provided by taking the dma_buf->lock mutex.
  *
  * - For full compatibility on the importer side with existing userspace
  *   interfaces, which might already support mmap'ing buffers. This is needed in
@@ -1074,11 +1129,12 @@ EXPORT_SYMBOL_GPL(dma_buf_move_notify);
  *   shootdowns would increase the complexity quite a bit.
  *
  *   Interface::
+ *
  *      int dma_buf_mmap(struct dma_buf \*, struct vm_area_struct \*,
  *		       unsigned long);
  *
  *   If the importing subsystem simply provides a special-purpose mmap call to
- *   set up a mapping in userspace, calling do_mmap with dma_buf->file will
+ *   set up a mapping in userspace, calling do_mmap with &dma_buf.file will
  *   equally achieve that for a dma-buf object.
  */
 
@@ -1111,6 +1167,11 @@ static int __dma_buf_begin_cpu_access(struct dma_buf *dmabuf,
  * dma_buf_end_cpu_access(). Only when cpu access is braketed by both calls is
  * it guaranteed to be coherent with other DMA access.
  *
+ * This function will also wait for any DMA transactions tracked through
+ * implicit synchronization in &dma_buf.resv. For DMA transactions with explicit
+ * synchronization this function will only ensure cache coherency, callers must
+ * ensure synchronization with such DMA transactions on their own.
+ *
  * Can return negative error values, returns 0 on success.
  */
 int dma_buf_begin_cpu_access(struct dma_buf *dmabuf,
@@ -1121,6 +1182,8 @@ int dma_buf_begin_cpu_access(struct dma_buf *dmabuf,
 	if (WARN_ON(!dmabuf))
 		return -EINVAL;
 
+	might_lock(&dmabuf->resv->lock.base);
+
 	if (dmabuf->ops->begin_cpu_access)
 		ret = dmabuf->ops->begin_cpu_access(dmabuf, direction);
 
@@ -1154,6 +1217,8 @@ int dma_buf_end_cpu_access(struct dma_buf *dmabuf,
 
 	WARN_ON(!dmabuf);
 
+	might_lock(&dmabuf->resv->lock.base);
+
 	if (dmabuf->ops->end_cpu_access)
 		ret = dmabuf->ops->end_cpu_access(dmabuf, direction);
 
@@ -1212,7 +1277,10 @@ EXPORT_SYMBOL_GPL(dma_buf_mmap);
  * This call may fail due to lack of virtual mapping address space.
  * These calls are optional in drivers. The intended use for them
  * is for mapping objects linear in kernel space for high use objects.
- * Please attempt to use kmap/kunmap before thinking about these interfaces.
+ *
+ * To ensure coherency users must call dma_buf_begin_cpu_access() and
+ * dma_buf_end_cpu_access() around any cpu access performed through this
+ * mapping.
  *
  * Returns 0 on success, or a negative errno code otherwise.
  */

drivers/dma-buf/st-dma-fence.c

@@ -471,8 +471,11 @@ static int thread_signal_callback(void *arg)
 			dma_fence_signal(f1);
 
 		smp_store_mb(cb.seen, false);
-		if (!f2 || dma_fence_add_callback(f2, &cb.cb, simple_callback))
+		if (!f2 ||
-			miss++, cb.seen = true;
+		    dma_fence_add_callback(f2, &cb.cb, simple_callback)) {
+			miss++;
+			cb.seen = true;
+		}
 
 		if (!t->before)
 			dma_fence_signal(f1);

drivers/gpu/drm/Kconfig

@@ -214,10 +214,6 @@ config DRM_GEM_SHMEM_HELPER
 	help
 	  Choose this if you need the GEM shmem helper functions
 
-config DRM_VM
-	bool
-	depends on DRM && MMU
-
 config DRM_SCHED
 	tristate
 	depends on DRM
@@ -391,7 +387,6 @@ source "drivers/gpu/drm/xlnx/Kconfig"
 menuconfig DRM_LEGACY
 	bool "Enable legacy drivers (DANGEROUS)"
 	depends on DRM && MMU
-	select DRM_VM
 	help
 	  Enable legacy DRI1 drivers. Those drivers expose unsafe and dangerous
 	  APIs to user-space, which can be used to circumvent access

drivers/gpu/drm/Makefile

@@ -5,7 +5,7 @@
 
 drm-y       :=	drm_auth.o drm_cache.o \
 		drm_file.o drm_gem.o drm_ioctl.o drm_irq.o \
-		drm_memory.o drm_drv.o \
+		drm_drv.o \
 		drm_sysfs.o drm_hashtab.o drm_mm.o \
 		drm_crtc.o drm_fourcc.o drm_modes.o drm_edid.o \
 		drm_encoder_slave.o \
@@ -20,9 +20,9 @@ drm-y       :=	drm_auth.o drm_cache.o \
 		drm_client_modeset.o drm_atomic_uapi.o drm_hdcp.o \
 		drm_managed.o drm_vblank_work.o
 
-drm-$(CONFIG_DRM_LEGACY) += drm_legacy_misc.o drm_bufs.o drm_context.o drm_dma.o drm_scatter.o drm_lock.o
+drm-$(CONFIG_DRM_LEGACY) += drm_bufs.o drm_context.o drm_dma.o drm_legacy_misc.o drm_lock.o \
+		drm_memory.o drm_scatter.o drm_vm.o
 drm-$(CONFIG_DRM_LIB_RANDOM) += lib/drm_random.o
-drm-$(CONFIG_DRM_VM) += drm_vm.o
 drm-$(CONFIG_COMPAT) += drm_ioc32.o
 drm-$(CONFIG_DRM_GEM_CMA_HELPER) += drm_gem_cma_helper.o
 drm-$(CONFIG_DRM_GEM_SHMEM_HELPER) += drm_gem_shmem_helper.o

drivers/gpu/drm/amd/amdgpu/Makefile

@@ -56,7 +56,7 @@ amdgpu-y += amdgpu_device.o amdgpu_kms.o \
 	amdgpu_gmc.o amdgpu_mmhub.o amdgpu_xgmi.o amdgpu_csa.o amdgpu_ras.o amdgpu_vm_cpu.o \
 	amdgpu_vm_sdma.o amdgpu_discovery.o amdgpu_ras_eeprom.o amdgpu_nbio.o \
 	amdgpu_umc.o smu_v11_0_i2c.o amdgpu_fru_eeprom.o amdgpu_rap.o \
-	amdgpu_fw_attestation.o
+	amdgpu_fw_attestation.o amdgpu_securedisplay.o
 
 amdgpu-$(CONFIG_PERF_EVENTS) += amdgpu_pmu.o
 
@@ -71,7 +71,7 @@ amdgpu-y += \
 	vi.o mxgpu_vi.o nbio_v6_1.o soc15.o emu_soc.o mxgpu_ai.o nbio_v7_0.o vega10_reg_init.o \
 	vega20_reg_init.o nbio_v7_4.o nbio_v2_3.o nv.o navi10_reg_init.o navi14_reg_init.o \
 	arct_reg_init.o navi12_reg_init.o mxgpu_nv.o sienna_cichlid_reg_init.o vangogh_reg_init.o \
-	nbio_v7_2.o dimgrey_cavefish_reg_init.o
+	nbio_v7_2.o dimgrey_cavefish_reg_init.o hdp_v4_0.o hdp_v5_0.o
 
 # add DF block
 amdgpu-y += \
@@ -97,6 +97,7 @@ amdgpu-y += \
 	tonga_ih.o \
 	cz_ih.o \
 	vega10_ih.o \
+	vega20_ih.o \
 	navi10_ih.o
 
 # add PSP block
@@ -170,7 +171,8 @@ amdgpu-y += \
 # add SMUIO block
 amdgpu-y += \
 	smuio_v9_0.o \
-	smuio_v11_0.o
+	smuio_v11_0.o \
+	smuio_v11_0_6.o
 
 # add amdkfd interfaces
 amdgpu-y += amdgpu_amdkfd.o

drivers/gpu/drm/amd/amdgpu/amdgpu.h

@@ -55,7 +55,6 @@
 #include <drm/ttm/ttm_bo_api.h>
 #include <drm/ttm/ttm_bo_driver.h>
 #include <drm/ttm/ttm_placement.h>
-#include <drm/ttm/ttm_module.h>
 #include <drm/ttm/ttm_execbuf_util.h>
 
 #include <drm/amdgpu_drm.h>
@@ -89,6 +88,7 @@
 #include "amdgpu_gfx.h"
 #include "amdgpu_sdma.h"
 #include "amdgpu_nbio.h"
+#include "amdgpu_hdp.h"
 #include "amdgpu_dm.h"
 #include "amdgpu_virt.h"
 #include "amdgpu_csa.h"
@@ -107,6 +107,7 @@
 #include "amdgpu_gfxhub.h"
 #include "amdgpu_df.h"
 #include "amdgpu_smuio.h"
+#include "amdgpu_hdp.h"
 
 #define MAX_GPU_INSTANCE		16
 
@@ -286,7 +287,7 @@ enum amdgpu_kiq_irq {
 
 #define MAX_KIQ_REG_WAIT       5000 /* in usecs, 5ms */
 #define MAX_KIQ_REG_BAILOUT_INTERVAL   5 /* in msecs, 5ms */
-#define MAX_KIQ_REG_TRY 80 /* 20 -> 80 */
+#define MAX_KIQ_REG_TRY 1000
 
 int amdgpu_device_ip_set_clockgating_state(void *dev,
 					   enum amd_ip_block_type block_type,
@@ -578,7 +579,8 @@ enum amd_reset_method {
 	AMD_RESET_METHOD_MODE0,
 	AMD_RESET_METHOD_MODE1,
 	AMD_RESET_METHOD_MODE2,
-	AMD_RESET_METHOD_BACO
+	AMD_RESET_METHOD_BACO,
+	AMD_RESET_METHOD_PCI,
 };
 
 /*
@@ -608,7 +610,6 @@ struct amdgpu_asic_funcs {
 	/* invalidate hdp read cache */
 	void (*invalidate_hdp)(struct amdgpu_device *adev,
 			       struct amdgpu_ring *ring);
-	void (*reset_hdp_ras_error_count)(struct amdgpu_device *adev);
 	/* check if the asic needs a full reset of if soft reset will work */
 	bool (*need_full_reset)(struct amdgpu_device *adev);
 	/* initialize doorbell layout for specific asic*/
@@ -891,6 +892,7 @@ struct amdgpu_device {
 	/* For pre-DCE11. DCE11 and later are in "struct amdgpu_device->dm" */
 	struct work_struct		hotplug_work;
 	struct amdgpu_irq_src		crtc_irq;
+	struct amdgpu_irq_src		vline0_irq;
 	struct amdgpu_irq_src		vupdate_irq;
 	struct amdgpu_irq_src		pageflip_irq;
 	struct amdgpu_irq_src		hpd_irq;
@@ -921,6 +923,9 @@ struct amdgpu_device {
 	/* nbio */
 	struct amdgpu_nbio		nbio;
 
+	/* hdp */
+	struct amdgpu_hdp		hdp;
+
 	/* smuio */
 	struct amdgpu_smuio		smuio;
 
@@ -1202,8 +1207,10 @@ int emu_soc_asic_init(struct amdgpu_device *adev);
 #define amdgpu_asic_read_bios_from_rom(adev, b, l) (adev)->asic_funcs->read_bios_from_rom((adev), (b), (l))
 #define amdgpu_asic_read_register(adev, se, sh, offset, v)((adev)->asic_funcs->read_register((adev), (se), (sh), (offset), (v)))
 #define amdgpu_asic_get_config_memsize(adev) (adev)->asic_funcs->get_config_memsize((adev))
-#define amdgpu_asic_flush_hdp(adev, r) (adev)->asic_funcs->flush_hdp((adev), (r))
+#define amdgpu_asic_flush_hdp(adev, r) \
-#define amdgpu_asic_invalidate_hdp(adev, r) (adev)->asic_funcs->invalidate_hdp((adev), (r))
+	((adev)->asic_funcs->flush_hdp ? (adev)->asic_funcs->flush_hdp((adev), (r)) : (adev)->hdp.funcs->flush_hdp((adev), (r)))
+#define amdgpu_asic_invalidate_hdp(adev, r) \
+	((adev)->asic_funcs->invalidate_hdp ? (adev)->asic_funcs->invalidate_hdp((adev), (r)) : (adev)->hdp.funcs->invalidate_hdp((adev), (r)))
 #define amdgpu_asic_need_full_reset(adev) (adev)->asic_funcs->need_full_reset((adev))
 #define amdgpu_asic_init_doorbell_index(adev) (adev)->asic_funcs->init_doorbell_index((adev))
 #define amdgpu_asic_get_pcie_usage(adev, cnt0, cnt1) ((adev)->asic_funcs->get_pcie_usage((adev), (cnt0), (cnt1)))
@@ -1222,6 +1229,7 @@ bool amdgpu_device_should_recover_gpu(struct amdgpu_device *adev);
 int amdgpu_device_gpu_recover(struct amdgpu_device *adev,
 			      struct amdgpu_job* job);
 void amdgpu_device_pci_config_reset(struct amdgpu_device *adev);
+int amdgpu_device_pci_reset(struct amdgpu_device *adev);
 bool amdgpu_device_need_post(struct amdgpu_device *adev);
 
 void amdgpu_cs_report_moved_bytes(struct amdgpu_device *adev, u64 num_bytes,

drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd.c

@@ -47,12 +47,8 @@ int amdgpu_amdkfd_init(void)
 	amdgpu_amdkfd_total_mem_size = si.totalram - si.totalhigh;
 	amdgpu_amdkfd_total_mem_size *= si.mem_unit;
 
-#ifdef CONFIG_HSA_AMD
 	ret = kgd2kfd_init();
 	amdgpu_amdkfd_gpuvm_init_mem_limits();
-#else
-	ret = -ENOENT;
-#endif
 	kfd_initialized = !ret;
 
 	return ret;
@@ -696,86 +692,3 @@ bool amdgpu_amdkfd_have_atomics_support(struct kgd_dev *kgd)
 
 	return adev->have_atomics_support;
 }
-
-#ifndef CONFIG_HSA_AMD
-bool amdkfd_fence_check_mm(struct dma_fence *f, struct mm_struct *mm)
-{
-	return false;
-}
-
-void amdgpu_amdkfd_unreserve_memory_limit(struct amdgpu_bo *bo)
-{
-}
-
-int amdgpu_amdkfd_remove_fence_on_pt_pd_bos(struct amdgpu_bo *bo)
-{
-	return 0;
-}
-
-void amdgpu_amdkfd_gpuvm_destroy_cb(struct amdgpu_device *adev,
-					struct amdgpu_vm *vm)
-{
-}
-
-struct amdgpu_amdkfd_fence *to_amdgpu_amdkfd_fence(struct dma_fence *f)
-{
-	return NULL;
-}
-
-int amdgpu_amdkfd_evict_userptr(struct kgd_mem *mem, struct mm_struct *mm)
-{
-	return 0;
-}
-
-struct kfd_dev *kgd2kfd_probe(struct kgd_dev *kgd, struct pci_dev *pdev,
-			      unsigned int asic_type, bool vf)
-{
-	return NULL;
-}
-
-bool kgd2kfd_device_init(struct kfd_dev *kfd,
-			 struct drm_device *ddev,
-			 const struct kgd2kfd_shared_resources *gpu_resources)
-{
-	return false;
-}
-
-void kgd2kfd_device_exit(struct kfd_dev *kfd)
-{
-}
-
-void kgd2kfd_exit(void)
-{
-}
-
-void kgd2kfd_suspend(struct kfd_dev *kfd, bool run_pm)
-{
-}
-
-int kgd2kfd_resume(struct kfd_dev *kfd, bool run_pm)
-{
-	return 0;
-}
-
-int kgd2kfd_pre_reset(struct kfd_dev *kfd)
-{
-	return 0;
-}
-
-int kgd2kfd_post_reset(struct kfd_dev *kfd)
-{
-	return 0;
-}
-
-void kgd2kfd_interrupt(struct kfd_dev *kfd, const void *ih_ring_entry)
-{
-}
-
-void kgd2kfd_set_sram_ecc_flag(struct kfd_dev *kfd)
-{
-}
-
-void kgd2kfd_smi_event_throttle(struct kfd_dev *kfd, uint32_t throttle_bitmask)
-{
-}
-#endif

drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd.h

@@ -94,11 +94,6 @@ enum kgd_engine_type {
 	KGD_ENGINE_MAX
 };
 
-struct amdgpu_amdkfd_fence *amdgpu_amdkfd_fence_create(u64 context,
-						       struct mm_struct *mm);
-bool amdkfd_fence_check_mm(struct dma_fence *f, struct mm_struct *mm);
-struct amdgpu_amdkfd_fence *to_amdgpu_amdkfd_fence(struct dma_fence *f);
-int amdgpu_amdkfd_remove_fence_on_pt_pd_bos(struct amdgpu_bo *bo);
 
 struct amdkfd_process_info {
 	/* List head of all VMs that belong to a KFD process */
@@ -132,8 +127,6 @@ void amdgpu_amdkfd_interrupt(struct amdgpu_device *adev,
 void amdgpu_amdkfd_device_probe(struct amdgpu_device *adev);
 void amdgpu_amdkfd_device_init(struct amdgpu_device *adev);
 void amdgpu_amdkfd_device_fini(struct amdgpu_device *adev);
-
-int amdgpu_amdkfd_evict_userptr(struct kgd_mem *mem, struct mm_struct *mm);
 int amdgpu_amdkfd_submit_ib(struct kgd_dev *kgd, enum kgd_engine_type engine,
 				uint32_t vmid, uint64_t gpu_addr,
 				uint32_t *ib_cmd, uint32_t ib_len);
@@ -153,6 +146,38 @@ void amdgpu_amdkfd_gpu_reset(struct kgd_dev *kgd);
 int amdgpu_queue_mask_bit_to_set_resource_bit(struct amdgpu_device *adev,
 					int queue_bit);
 
+struct amdgpu_amdkfd_fence *amdgpu_amdkfd_fence_create(u64 context,
+								struct mm_struct *mm);
+#if IS_ENABLED(CONFIG_HSA_AMD)
+bool amdkfd_fence_check_mm(struct dma_fence *f, struct mm_struct *mm);
+struct amdgpu_amdkfd_fence *to_amdgpu_amdkfd_fence(struct dma_fence *f);
+int amdgpu_amdkfd_remove_fence_on_pt_pd_bos(struct amdgpu_bo *bo);
+int amdgpu_amdkfd_evict_userptr(struct kgd_mem *mem, struct mm_struct *mm);
+#else
+static inline
+bool amdkfd_fence_check_mm(struct dma_fence *f, struct mm_struct *mm)
+{
+	return false;
+}
+
+static inline
+struct amdgpu_amdkfd_fence *to_amdgpu_amdkfd_fence(struct dma_fence *f)
+{
+	return NULL;
+}
+
+static inline
+int amdgpu_amdkfd_remove_fence_on_pt_pd_bos(struct amdgpu_bo *bo)
+{
+	return 0;
+}
+
+static inline
+int amdgpu_amdkfd_evict_userptr(struct kgd_mem *mem, struct mm_struct *mm)
+{
+	return 0;
+}
+#endif
 /* Shared API */
 int amdgpu_amdkfd_alloc_gtt_mem(struct kgd_dev *kgd, size_t size,
 				void **mem_obj, uint64_t *gpu_addr,
@@ -215,8 +240,6 @@ int amdgpu_amdkfd_gpuvm_acquire_process_vm(struct kgd_dev *kgd,
 					struct file *filp, u32 pasid,
 					void **vm, void **process_info,
 					struct dma_fence **ef);
-void amdgpu_amdkfd_gpuvm_destroy_cb(struct amdgpu_device *adev,
-				struct amdgpu_vm *vm);
 void amdgpu_amdkfd_gpuvm_destroy_process_vm(struct kgd_dev *kgd, void *vm);
 void amdgpu_amdkfd_gpuvm_release_process_vm(struct kgd_dev *kgd, void *vm);
 uint64_t amdgpu_amdkfd_gpuvm_get_process_page_dir(void *vm);
@@ -236,23 +259,43 @@ int amdgpu_amdkfd_gpuvm_map_gtt_bo_to_kernel(struct kgd_dev *kgd,
 		struct kgd_mem *mem, void **kptr, uint64_t *size);
 int amdgpu_amdkfd_gpuvm_restore_process_bos(void *process_info,
 					    struct dma_fence **ef);
-
 int amdgpu_amdkfd_gpuvm_get_vm_fault_info(struct kgd_dev *kgd,
 					      struct kfd_vm_fault_info *info);
-
 int amdgpu_amdkfd_gpuvm_import_dmabuf(struct kgd_dev *kgd,
 				      struct dma_buf *dmabuf,
 				      uint64_t va, void *vm,
 				      struct kgd_mem **mem, uint64_t *size,
 				      uint64_t *mmap_offset);
-
-void amdgpu_amdkfd_gpuvm_init_mem_limits(void);
-void amdgpu_amdkfd_unreserve_memory_limit(struct amdgpu_bo *bo);
-
 int amdgpu_amdkfd_get_tile_config(struct kgd_dev *kgd,
 				struct tile_config *config);
+#if IS_ENABLED(CONFIG_HSA_AMD)
+void amdgpu_amdkfd_gpuvm_init_mem_limits(void);
+void amdgpu_amdkfd_gpuvm_destroy_cb(struct amdgpu_device *adev,
+				struct amdgpu_vm *vm);
+void amdgpu_amdkfd_unreserve_memory_limit(struct amdgpu_bo *bo);
+#else
+static inline
+void amdgpu_amdkfd_gpuvm_init_mem_limits(void)
+{
+}
 
+static inline
+void amdgpu_amdkfd_gpuvm_destroy_cb(struct amdgpu_device *adev,
+					struct amdgpu_vm *vm)
+{
+}
+
+static inline
+void amdgpu_amdkfd_unreserve_memory_limit(struct amdgpu_bo *bo)
+{
+}
+#endif
 /* KGD2KFD callbacks */
+int kgd2kfd_quiesce_mm(struct mm_struct *mm);
+int kgd2kfd_resume_mm(struct mm_struct *mm);
+int kgd2kfd_schedule_evict_and_restore_process(struct mm_struct *mm,
+						struct dma_fence *fence);
+#if IS_ENABLED(CONFIG_HSA_AMD)
 int kgd2kfd_init(void);
 void kgd2kfd_exit(void);
 struct kfd_dev *kgd2kfd_probe(struct kgd_dev *kgd, struct pci_dev *pdev,
@@ -266,11 +309,68 @@ int kgd2kfd_resume(struct kfd_dev *kfd, bool run_pm);
 int kgd2kfd_pre_reset(struct kfd_dev *kfd);
 int kgd2kfd_post_reset(struct kfd_dev *kfd);
 void kgd2kfd_interrupt(struct kfd_dev *kfd, const void *ih_ring_entry);
-int kgd2kfd_quiesce_mm(struct mm_struct *mm);
-int kgd2kfd_resume_mm(struct mm_struct *mm);
-int kgd2kfd_schedule_evict_and_restore_process(struct mm_struct *mm,
-					       struct dma_fence *fence);
 void kgd2kfd_set_sram_ecc_flag(struct kfd_dev *kfd);
 void kgd2kfd_smi_event_throttle(struct kfd_dev *kfd, uint32_t throttle_bitmask);
+#else
+static inline int kgd2kfd_init(void)
+{
+	return -ENOENT;
+}
 
+static inline void kgd2kfd_exit(void)
+{
+}
+
+static inline
+struct kfd_dev *kgd2kfd_probe(struct kgd_dev *kgd, struct pci_dev *pdev,
+					unsigned int asic_type, bool vf)
+{
+	return NULL;
+}
+
+static inline
+bool kgd2kfd_device_init(struct kfd_dev *kfd, struct drm_device *ddev,
+				const struct kgd2kfd_shared_resources *gpu_resources)
+{
+	return false;
+}
+
+static inline void kgd2kfd_device_exit(struct kfd_dev *kfd)
+{
+}
+
+static inline void kgd2kfd_suspend(struct kfd_dev *kfd, bool run_pm)
+{
+}
+
+static inline int kgd2kfd_resume(struct kfd_dev *kfd, bool run_pm)
+{
+	return 0;
+}
+
+static inline int kgd2kfd_pre_reset(struct kfd_dev *kfd)
+{
+	return 0;
+}
+
+static inline int kgd2kfd_post_reset(struct kfd_dev *kfd)
+{
+	return 0;
+}
+
+static inline
+void kgd2kfd_interrupt(struct kfd_dev *kfd, const void *ih_ring_entry)
+{
+}
+
+static inline
+void kgd2kfd_set_sram_ecc_flag(struct kfd_dev *kfd)
+{
+}
+
+static inline
+void kgd2kfd_smi_event_throttle(struct kfd_dev *kfd, uint32_t throttle_bitmask)
+{
+}
+#endif
 #endif /* AMDGPU_AMDKFD_H_INCLUDED */

drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gfx_v10.c

@@ -23,7 +23,6 @@
 #include "amdgpu_amdkfd.h"
 #include "gc/gc_10_1_0_offset.h"
 #include "gc/gc_10_1_0_sh_mask.h"
-#include "navi10_enum.h"
 #include "athub/athub_2_0_0_offset.h"
 #include "athub/athub_2_0_0_sh_mask.h"
 #include "oss/osssys_5_0_0_offset.h"

drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gfx_v10_3.c

@@ -24,7 +24,6 @@
 #include "amdgpu_amdkfd.h"
 #include "gc/gc_10_3_0_offset.h"
 #include "gc/gc_10_3_0_sh_mask.h"
-#include "navi10_enum.h"
 #include "oss/osssys_5_0_0_offset.h"
 #include "oss/osssys_5_0_0_sh_mask.h"
 #include "soc15_common.h"

drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c

@@ -454,7 +454,7 @@ static int add_bo_to_vm(struct amdgpu_device *adev, struct kgd_mem *mem,
 	struct amdgpu_bo *bo = mem->bo;
 	uint64_t va = mem->va;
 	struct list_head *list_bo_va = &mem->bo_va_list;
-	unsigned long bo_size = bo->tbo.mem.size;
+	unsigned long bo_size = bo->tbo.base.size;
 
 	if (!va) {
 		pr_err("Invalid VA when adding BO to VM\n");
@@ -1277,7 +1277,7 @@ int amdgpu_amdkfd_gpuvm_free_memory_of_gpu(
 		struct kgd_dev *kgd, struct kgd_mem *mem, uint64_t *size)
 {
 	struct amdkfd_process_info *process_info = mem->process_info;
-	unsigned long bo_size = mem->bo->tbo.mem.size;
+	unsigned long bo_size = mem->bo->tbo.base.size;
 	struct kfd_bo_va_list *entry, *tmp;
 	struct bo_vm_reservation_context ctx;
 	struct ttm_validate_buffer *bo_list_entry;
@@ -1398,7 +1398,7 @@ int amdgpu_amdkfd_gpuvm_map_memory_to_gpu(
 	mutex_lock(&mem->lock);
 
 	domain = mem->domain;
-	bo_size = bo->tbo.mem.size;
+	bo_size = bo->tbo.base.size;
 
 	pr_debug("Map VA 0x%llx - 0x%llx to vm %p domain %s\n",
 			mem->va,
@@ -1502,7 +1502,7 @@ int amdgpu_amdkfd_gpuvm_unmap_memory_from_gpu(
 	struct amdgpu_device *adev = get_amdgpu_device(kgd);
 	struct amdkfd_process_info *process_info =
 		((struct amdgpu_vm *)vm)->process_info;
-	unsigned long bo_size = mem->bo->tbo.mem.size;
+	unsigned long bo_size = mem->bo->tbo.base.size;
 	struct kfd_bo_va_list *entry;
 	struct bo_vm_reservation_context ctx;
 	int ret;

drivers/gpu/drm/amd/amdgpu/amdgpu_bios.c

@@ -155,7 +155,7 @@ static bool amdgpu_read_bios_from_rom(struct amdgpu_device *adev)
 	u8 header[AMD_VBIOS_SIGNATURE_END+1] = {0};
 	int len;
 
-	if (!adev->asic_funcs->read_bios_from_rom)
+	if (!adev->asic_funcs || !adev->asic_funcs->read_bios_from_rom)
 		return false;
 
 	/* validate VBIOS signature */
@@ -348,7 +348,8 @@ static bool amdgpu_read_disabled_bios(struct amdgpu_device *adev)
 	if (adev->flags & AMD_IS_APU)
 		return igp_read_bios_from_vram(adev);
 	else
-		return amdgpu_asic_read_disabled_bios(adev);
+		return (!adev->asic_funcs || !adev->asic_funcs->read_disabled_bios) ?
+			false : amdgpu_asic_read_disabled_bios(adev);
 }
 
 #ifdef CONFIG_ACPI

drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c

@@ -98,8 +98,7 @@ static int amdgpu_cs_bo_handles_chunk(struct amdgpu_cs_parser *p,
 	return 0;
 
 error_free:
-	if (info)
+	kvfree(info);
-		kvfree(info);
 
 	return r;
 }

drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c

@@ -35,6 +35,7 @@
 #include "amdgpu_dm_debugfs.h"
 #include "amdgpu_ras.h"
 #include "amdgpu_rap.h"
+#include "amdgpu_securedisplay.h"
 #include "amdgpu_fw_attestation.h"
 
 /**
@@ -1427,7 +1428,7 @@ static void amdgpu_ib_preempt_job_recovery(struct drm_gpu_scheduler *sched)
 	struct dma_fence *fence;
 
 	spin_lock(&sched->job_list_lock);
-	list_for_each_entry(s_job, &sched->ring_mirror_list, node) {
+	list_for_each_entry(s_job, &sched->pending_list, list) {
 		fence = sched->ops->run_job(s_job);
 		dma_fence_put(fence);
 	}
@@ -1459,10 +1460,10 @@ static void amdgpu_ib_preempt_mark_partial_job(struct amdgpu_ring *ring)
 
 no_preempt:
 	spin_lock(&sched->job_list_lock);
-	list_for_each_entry_safe(s_job, tmp, &sched->ring_mirror_list, node) {
+	list_for_each_entry_safe(s_job, tmp, &sched->pending_list, list) {
 		if (dma_fence_is_signaled(&s_job->s_fence->finished)) {
 			/* remove job from ring_mirror_list */
-			list_del_init(&s_job->node);
+			list_del_init(&s_job->list);
 			sched->ops->free_job(s_job);
 			continue;
 		}
@@ -1669,6 +1670,8 @@ int amdgpu_debugfs_init(struct amdgpu_device *adev)
 
 	amdgpu_rap_debugfs_init(adev);
 
+	amdgpu_securedisplay_debugfs_init(adev);
+
 	amdgpu_fw_attestation_debugfs_init(adev);
 
 	return amdgpu_debugfs_add_files(adev, amdgpu_debugfs_list,

drivers/gpu/drm/amd/amdgpu/amdgpu_device.c

@@ -929,6 +929,18 @@ void amdgpu_device_pci_config_reset(struct amdgpu_device *adev)
 	pci_write_config_dword(adev->pdev, 0x7c, AMDGPU_ASIC_RESET_DATA);
 }
 
+/**
+ * amdgpu_device_pci_reset - reset the GPU using generic PCI means
+ *
+ * @adev: amdgpu_device pointer
+ *
+ * Resets the GPU using generic pci reset interfaces (FLR, SBR, etc.).
+ */
+int amdgpu_device_pci_reset(struct amdgpu_device *adev)
+{
+	return pci_reset_function(adev->pdev);
+}
+
 /*
  * GPU doorbell aperture helpers function.
  */
@@ -1105,8 +1117,7 @@ void amdgpu_device_wb_free(struct amdgpu_device *adev, u32 wb)
  */
 int amdgpu_device_resize_fb_bar(struct amdgpu_device *adev)
 {
-	u64 space_needed = roundup_pow_of_two(adev->gmc.real_vram_size);
+	int rbar_size = pci_rebar_bytes_to_size(adev->gmc.real_vram_size);
-	u32 rbar_size = order_base_2(((space_needed >> 20) | 1)) - 1;
 	struct pci_bus *root;
 	struct resource *res;
 	unsigned i;
@@ -1137,6 +1148,10 @@ int amdgpu_device_resize_fb_bar(struct amdgpu_device *adev)
 	if (!res)
 		return 0;
 
+	/* Limit the BAR size to what is available */
+	rbar_size = min(fls(pci_rebar_get_possible_sizes(adev->pdev, 0)) - 1,
+			rbar_size);
+
 	/* Disable memory decoding while we change the BAR addresses and size */
 	pci_read_config_word(adev->pdev, PCI_COMMAND, &cmd);
 	pci_write_config_word(adev->pdev, PCI_COMMAND,
@@ -1422,24 +1437,22 @@ static void amdgpu_switcheroo_set_state(struct pci_dev *pdev,
 		/* don't suspend or resume card normally */
 		dev->switch_power_state = DRM_SWITCH_POWER_CHANGING;
 
-		pci_set_power_state(dev->pdev, PCI_D0);
+		pci_set_power_state(pdev, PCI_D0);
-		amdgpu_device_load_pci_state(dev->pdev);
+		amdgpu_device_load_pci_state(pdev);
-		r = pci_enable_device(dev->pdev);
+		r = pci_enable_device(pdev);
 		if (r)
 			DRM_WARN("pci_enable_device failed (%d)\n", r);
 		amdgpu_device_resume(dev, true);
 
 		dev->switch_power_state = DRM_SWITCH_POWER_ON;
-		drm_kms_helper_poll_enable(dev);
 	} else {
 		pr_info("switched off\n");
-		drm_kms_helper_poll_disable(dev);
 		dev->switch_power_state = DRM_SWITCH_POWER_CHANGING;
 		amdgpu_device_suspend(dev, true);
-		amdgpu_device_cache_pci_state(dev->pdev);
+		amdgpu_device_cache_pci_state(pdev);
 		/* Shut down the device */
-		pci_disable_device(dev->pdev);
+		pci_disable_device(pdev);
-		pci_set_power_state(dev->pdev, PCI_D3cold);
+		pci_set_power_state(pdev, PCI_D3cold);
 		dev->switch_power_state = DRM_SWITCH_POWER_OFF;
 	}
 }
@@ -1702,8 +1715,7 @@ static void amdgpu_device_enable_virtual_display(struct amdgpu_device *adev)
 	adev->enable_virtual_display = false;
 
 	if (amdgpu_virtual_display) {
-		struct drm_device *ddev = adev_to_drm(adev);
+		const char *pci_address_name = pci_name(adev->pdev);
-		const char *pci_address_name = pci_name(ddev->pdev);
 		char *pciaddstr, *pciaddstr_tmp, *pciaddname_tmp, *pciaddname;
 
 		pciaddstr = kstrdup(amdgpu_virtual_display, GFP_KERNEL);
@@ -3116,7 +3128,10 @@ static int amdgpu_device_get_job_timeout_settings(struct amdgpu_device *adev)
 	 */
 	adev->gfx_timeout = msecs_to_jiffies(10000);
 	adev->sdma_timeout = adev->video_timeout = adev->gfx_timeout;
-	if (amdgpu_sriov_vf(adev) || amdgpu_passthrough(adev))
+	if (amdgpu_sriov_vf(adev))
+		adev->compute_timeout = amdgpu_sriov_is_pp_one_vf(adev) ?
+					msecs_to_jiffies(60000) : msecs_to_jiffies(10000);
+	else if (amdgpu_passthrough(adev))
 		adev->compute_timeout =  msecs_to_jiffies(60000);
 	else
 		adev->compute_timeout = MAX_SCHEDULE_TIMEOUT;
@@ -3396,7 +3411,7 @@ int amdgpu_device_init(struct amdgpu_device *adev,
 		}
 	}
 
-	pci_enable_pcie_error_reporting(adev->ddev.pdev);
+	pci_enable_pcie_error_reporting(adev->pdev);
 
 	/* Post card if necessary */
 	if (amdgpu_device_need_post(adev)) {
@@ -3719,7 +3734,7 @@ int amdgpu_device_suspend(struct drm_device *dev, bool fbcon)
 
 	r = amdgpu_device_ip_suspend_phase1(adev);
 
-	amdgpu_amdkfd_suspend(adev, !fbcon);
+	amdgpu_amdkfd_suspend(adev, adev->in_runpm);
 
 	/* evict vram memory */
 	amdgpu_bo_evict_vram(adev);
@@ -3803,7 +3818,7 @@ int amdgpu_device_resume(struct drm_device *dev, bool fbcon)
 			}
 		}
 	}
-	r = amdgpu_amdkfd_resume(adev, !fbcon);
+	r = amdgpu_amdkfd_resume(adev, adev->in_runpm);
 	if (r)
 		return r;
 
@@ -4154,8 +4169,8 @@ bool amdgpu_device_has_job_running(struct amdgpu_device *adev)
 			continue;
 
 		spin_lock(&ring->sched.job_list_lock);
-		job = list_first_entry_or_null(&ring->sched.ring_mirror_list,
+		job = list_first_entry_or_null(&ring->sched.pending_list,
-				struct drm_sched_job, node);
+					       struct drm_sched_job, list);
 		spin_unlock(&ring->sched.job_list_lock);
 		if (job)
 			return true;
@@ -4205,6 +4220,8 @@ bool amdgpu_device_should_recover_gpu(struct amdgpu_device *adev)
 		case CHIP_NAVI14:
 		case CHIP_NAVI12:
 		case CHIP_SIENNA_CICHLID:
+		case CHIP_NAVY_FLOUNDER:
+		case CHIP_DIMGREY_CAVEFISH:
 			break;
 		default:
 			goto disabled;
@@ -4454,6 +4471,46 @@ static void amdgpu_device_unlock_adev(struct amdgpu_device *adev)
 	up_write(&adev->reset_sem);
 }
 
+/*
+ * to lockup a list of amdgpu devices in a hive safely, if not a hive
+ * with multiple nodes, it will be similar as amdgpu_device_lock_adev.
+ *
+ * unlock won't require roll back.
+ */
+static int amdgpu_device_lock_hive_adev(struct amdgpu_device *adev, struct amdgpu_hive_info *hive)
+{
+	struct amdgpu_device *tmp_adev = NULL;
+
+	if (adev->gmc.xgmi.num_physical_nodes > 1) {
+		if (!hive) {
+			dev_err(adev->dev, "Hive is NULL while device has multiple xgmi nodes");
+			return -ENODEV;
+		}
+		list_for_each_entry(tmp_adev, &hive->device_list, gmc.xgmi.head) {
+			if (!amdgpu_device_lock_adev(tmp_adev, hive))
+				goto roll_back;
+		}
+	} else if (!amdgpu_device_lock_adev(adev, hive))
+		return -EAGAIN;
+
+	return 0;
+roll_back:
+	if (!list_is_first(&tmp_adev->gmc.xgmi.head, &hive->device_list)) {
+		/*
+		 * if the lockup iteration break in the middle of a hive,
+		 * it may means there may has a race issue,
+		 * or a hive device locked up independently.
+		 * we may be in trouble and may not, so will try to roll back
+		 * the lock and give out a warnning.
+		 */
+		dev_warn(tmp_adev->dev, "Hive lock iteration broke in the middle. Rolling back to unlock");
+		list_for_each_entry_continue_reverse(tmp_adev, &hive->device_list, gmc.xgmi.head) {
+			amdgpu_device_unlock_adev(tmp_adev);
+		}
+	}
+	return -EAGAIN;
+}
+
 static void amdgpu_device_resume_display_audio(struct amdgpu_device *adev)
 {
 	struct pci_dev *p = NULL;
@@ -4567,11 +4624,29 @@ int amdgpu_device_gpu_recover(struct amdgpu_device *adev,
 			DRM_INFO("Bailing on TDR for s_job:%llx, hive: %llx as another already in progress",
 				job ? job->base.id : -1, hive->hive_id);
 			amdgpu_put_xgmi_hive(hive);
+			if (job)
+				drm_sched_increase_karma(&job->base);
 			return 0;
 		}
 		mutex_lock(&hive->hive_lock);
 	}
 
+	/*
+	 * lock the device before we try to operate the linked list
+	 * if didn't get the device lock, don't touch the linked list since
+	 * others may iterating it.
+	 */
+	r = amdgpu_device_lock_hive_adev(adev, hive);
+	if (r) {
+		dev_info(adev->dev, "Bailing on TDR for s_job:%llx, as another already in progress",
+					job ? job->base.id : -1);
+
+		/* even we skipped this reset, still need to set the job to guilty */
+		if (job)
+			drm_sched_increase_karma(&job->base);
+		goto skip_recovery;
+	}
+
 	/*
 	 * Build list of devices to reset.
 	 * In case we are in XGMI hive mode, resort the device list
@@ -4579,8 +4654,6 @@ int amdgpu_device_gpu_recover(struct amdgpu_device *adev,
 	 */
 	INIT_LIST_HEAD(&device_list);
 	if (adev->gmc.xgmi.num_physical_nodes > 1) {
-		if (!hive)
-			return -ENODEV;
 		if (!list_is_first(&adev->gmc.xgmi.head, &hive->device_list))
 			list_rotate_to_front(&adev->gmc.xgmi.head, &hive->device_list);
 		device_list_handle = &hive->device_list;
@@ -4591,13 +4664,6 @@ int amdgpu_device_gpu_recover(struct amdgpu_device *adev,
 
 	/* block all schedulers and reset given job's ring */
 	list_for_each_entry(tmp_adev, device_list_handle, gmc.xgmi.head) {
-		if (!amdgpu_device_lock_adev(tmp_adev, hive)) {
-			dev_info(tmp_adev->dev, "Bailing on TDR for s_job:%llx, as another already in progress",
-				  job ? job->base.id : -1);
-			r = 0;
-			goto skip_recovery;
-		}
-
 		/*
 		 * Try to put the audio codec into suspend state
 		 * before gpu reset started.
@@ -4735,7 +4801,7 @@ skip_recovery:
 		amdgpu_put_xgmi_hive(hive);
 	}
 
-	if (r)
+	if (r && r != -EAGAIN)
 		dev_info(adev->dev, "GPU reset end with ret = %d\n", r);
 	return r;
 }
@@ -4785,7 +4851,13 @@ static void amdgpu_device_get_pcie_info(struct amdgpu_device *adev)
 						  CAIL_ASIC_PCIE_LINK_SPEED_SUPPORT_GEN2 |
 						  CAIL_ASIC_PCIE_LINK_SPEED_SUPPORT_GEN3);
 		} else {
-			if (speed_cap == PCIE_SPEED_16_0GT)
+			if (speed_cap == PCIE_SPEED_32_0GT)
+				adev->pm.pcie_gen_mask |= (CAIL_ASIC_PCIE_LINK_SPEED_SUPPORT_GEN1 |
+							  CAIL_ASIC_PCIE_LINK_SPEED_SUPPORT_GEN2 |
+							  CAIL_ASIC_PCIE_LINK_SPEED_SUPPORT_GEN3 |
+							  CAIL_ASIC_PCIE_LINK_SPEED_SUPPORT_GEN4 |
+							  CAIL_ASIC_PCIE_LINK_SPEED_SUPPORT_GEN5);
+			else if (speed_cap == PCIE_SPEED_16_0GT)
 				adev->pm.pcie_gen_mask |= (CAIL_ASIC_PCIE_LINK_SPEED_SUPPORT_GEN1 |
 							  CAIL_ASIC_PCIE_LINK_SPEED_SUPPORT_GEN2 |
 							  CAIL_ASIC_PCIE_LINK_SPEED_SUPPORT_GEN3 |
@@ -4805,7 +4877,13 @@ static void amdgpu_device_get_pcie_info(struct amdgpu_device *adev)
 			adev->pm.pcie_gen_mask |= (CAIL_PCIE_LINK_SPEED_SUPPORT_GEN1 |
 						   CAIL_PCIE_LINK_SPEED_SUPPORT_GEN2);
 		} else {
-			if (platform_speed_cap == PCIE_SPEED_16_0GT)
+			if (platform_speed_cap == PCIE_SPEED_32_0GT)
+				adev->pm.pcie_gen_mask |= (CAIL_PCIE_LINK_SPEED_SUPPORT_GEN1 |
+							   CAIL_PCIE_LINK_SPEED_SUPPORT_GEN2 |
+							   CAIL_PCIE_LINK_SPEED_SUPPORT_GEN3 |
+							   CAIL_PCIE_LINK_SPEED_SUPPORT_GEN4 |
+							   CAIL_PCIE_LINK_SPEED_SUPPORT_GEN5);
+			else if (platform_speed_cap == PCIE_SPEED_16_0GT)
 				adev->pm.pcie_gen_mask |= (CAIL_PCIE_LINK_SPEED_SUPPORT_GEN1 |
 							   CAIL_PCIE_LINK_SPEED_SUPPORT_GEN2 |
 							   CAIL_PCIE_LINK_SPEED_SUPPORT_GEN3 |
@@ -4949,8 +5027,8 @@ pci_ers_result_t amdgpu_pci_error_detected(struct pci_dev *pdev, pci_channel_sta
 	case pci_channel_io_normal:
 		return PCI_ERS_RESULT_CAN_RECOVER;
 	/* Fatal error, prepare for slot reset */
-	case pci_channel_io_frozen:		
+	case pci_channel_io_frozen:
-		/*		
+		/*
 		 * Cancel and wait for all TDRs in progress if failing to
 		 * set  adev->in_gpu_reset in amdgpu_device_lock_adev
 		 *
@@ -5041,7 +5119,7 @@ pci_ers_result_t amdgpu_pci_slot_reset(struct pci_dev *pdev)
 		goto out;
 	}
 
-	adev->in_pci_err_recovery = true;	
+	adev->in_pci_err_recovery = true;
 	r = amdgpu_device_pre_asic_reset(adev, NULL, &need_full_reset);
 	adev->in_pci_err_recovery = false;
 	if (r)

drivers/gpu/drm/amd/amdgpu/amdgpu_dma_buf.c

@@ -40,6 +40,7 @@
 #include <linux/dma-buf.h>
 #include <linux/dma-fence-array.h>
 #include <linux/pci-p2pdma.h>
+#include <linux/pm_runtime.h>
 
 /**
  * amdgpu_gem_prime_mmap - &drm_driver.gem_prime_mmap implementation
@@ -151,9 +152,13 @@ static int amdgpu_dma_buf_attach(struct dma_buf *dmabuf,
 	if (attach->dev->driver == adev->dev->driver)
 		return 0;
 
+	r = pm_runtime_get_sync(adev_to_drm(adev)->dev);
+	if (r < 0)
+		goto out;
+
 	r = amdgpu_bo_reserve(bo, false);
 	if (unlikely(r != 0))
-		return r;
+		goto out;
 
 	/*
 	 * We only create shared fences for internal use, but importers
@@ -165,11 +170,15 @@ static int amdgpu_dma_buf_attach(struct dma_buf *dmabuf,
 	 */
 	r = __dma_resv_make_exclusive(bo->tbo.base.resv);
 	if (r)
-		return r;
+		goto out;
 
 	bo->prime_shared_count++;
 	amdgpu_bo_unreserve(bo);
 	return 0;
+
+out:
+	pm_runtime_put_autosuspend(adev_to_drm(adev)->dev);
+	return r;
 }
 
 /**
@@ -189,6 +198,9 @@ static void amdgpu_dma_buf_detach(struct dma_buf *dmabuf,
 
 	if (attach->dev->driver != adev->dev->driver && bo->prime_shared_count)
 		bo->prime_shared_count--;
+
+	pm_runtime_mark_last_busy(adev_to_drm(adev)->dev);
+	pm_runtime_put_autosuspend(adev_to_drm(adev)->dev);
 }
 
 /**
@@ -269,7 +281,7 @@ static struct sg_table *amdgpu_dma_buf_map(struct dma_buf_attachment *attach,
 	case TTM_PL_TT:
 		sgt = drm_prime_pages_to_sg(obj->dev,
 					    bo->tbo.ttm->pages,
-					    bo->tbo.num_pages);
+					    bo->tbo.ttm->num_pages);
 		if (IS_ERR(sgt))
 			return sgt;
 

drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c

@@ -132,8 +132,12 @@ uint amdgpu_pg_mask = 0xffffffff;
 uint amdgpu_sdma_phase_quantum = 32;
 char *amdgpu_disable_cu = NULL;
 char *amdgpu_virtual_display = NULL;
-/* OverDrive(bit 14) disabled by default*/
+
-uint amdgpu_pp_feature_mask = 0xffffbfff;
+/*
+ * OverDrive(bit 14) disabled by default
+ * GFX DCS(bit 19) disabled by default
+ */
+uint amdgpu_pp_feature_mask = 0xfff7bfff;
 uint amdgpu_force_long_training;
 int amdgpu_job_hang_limit;
 int amdgpu_lbpw = -1;
@@ -789,9 +793,9 @@ module_param_named(tmz, amdgpu_tmz, int, 0444);
 
 /**
  * DOC: reset_method (int)
- * GPU reset method (-1 = auto (default), 0 = legacy, 1 = mode0, 2 = mode1, 3 = mode2, 4 = baco)
+ * GPU reset method (-1 = auto (default), 0 = legacy, 1 = mode0, 2 = mode1, 3 = mode2, 4 = baco, 5 = pci)
  */
-MODULE_PARM_DESC(reset_method, "GPU reset method (-1 = auto (default), 0 = legacy, 1 = mode0, 2 = mode1, 3 = mode2, 4 = baco/bamaco)");
+MODULE_PARM_DESC(reset_method, "GPU reset method (-1 = auto (default), 0 = legacy, 1 = mode0, 2 = mode1, 3 = mode2, 4 = baco/bamaco, 5 = pci)");
 module_param_named(reset_method, amdgpu_reset_method, int, 0444);
 
 /**
@@ -1094,6 +1098,7 @@ static const struct pci_device_id pciidlist[] = {
 
 	/* Sienna_Cichlid */
 	{0x1002, 0x73A0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_SIENNA_CICHLID},
+	{0x1002, 0x73A1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_SIENNA_CICHLID},
 	{0x1002, 0x73A2, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_SIENNA_CICHLID},
 	{0x1002, 0x73A3, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_SIENNA_CICHLID},
 	{0x1002, 0x73AB, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_SIENNA_CICHLID},
@@ -1206,7 +1211,6 @@ static int amdgpu_pci_probe(struct pci_dev *pdev,
 	if (ret)
 		return ret;
 
-	ddev->pdev = pdev;
 	pci_set_drvdata(pdev, ddev);
 
 	ret = amdgpu_driver_load_kms(adev, ent->driver_data);
@@ -1344,11 +1348,12 @@ static int amdgpu_pmops_runtime_suspend(struct device *dev)
 	adev->in_runpm = true;
 	if (amdgpu_device_supports_atpx(drm_dev))
 		drm_dev->switch_power_state = DRM_SWITCH_POWER_CHANGING;
-	drm_kms_helper_poll_disable(drm_dev);
 
 	ret = amdgpu_device_suspend(drm_dev, false);
-	if (ret)
+	if (ret) {
+		adev->in_runpm = false;
 		return ret;
+	}
 
 	if (amdgpu_device_supports_atpx(drm_dev)) {
 		/* Only need to handle PCI state in the driver for ATPX
@@ -1401,7 +1406,6 @@ static int amdgpu_pmops_runtime_resume(struct device *dev)
 		amdgpu_device_baco_exit(drm_dev);
 	}
 	ret = amdgpu_device_resume(drm_dev, false);
-	drm_kms_helper_poll_enable(drm_dev);
 	if (amdgpu_device_supports_atpx(drm_dev))
 		drm_dev->switch_power_state = DRM_SWITCH_POWER_ON;
 	adev->in_runpm = false;

drivers/gpu/drm/amd/amdgpu/amdgpu_fb.c

@@ -271,7 +271,7 @@ static int amdgpufb_create(struct drm_fb_helper *helper,
 	DRM_INFO("fb depth is %d\n", fb->format->depth);
 	DRM_INFO("   pitch is %d\n", fb->pitches[0]);
 
-	vga_switcheroo_client_fb_set(adev_to_drm(adev)->pdev, info);
+	vga_switcheroo_client_fb_set(adev->pdev, info);
 	return 0;
 
 out:

drivers/gpu/drm/amd/amdgpu/amdgpu_fw_attestation.c

@@ -47,10 +47,9 @@ typedef struct FW_ATT_RECORD
 	uint16_t AttFwIdV2;              /* V2 FW ID field */
 	uint32_t AttFWVersion;           /* FW Version */
 	uint16_t AttFWActiveFunctionID;  /* The VF ID (only in VF Attestation Table) */
-	uint16_t AttSource;              /* FW source indicator */
+	uint8_t  AttSource;              /* FW source indicator */
-	uint16_t RecordValid;            /* Indicates whether the record is a valid entry */
+	uint8_t  RecordValid;            /* Indicates whether the record is a valid entry */
-	uint8_t  AttFwTaId;              /* Ta ID (only in TA Attestation Table) */
+	uint32_t AttFwTaId;              /* Ta ID (only in TA Attestation Table) */
-	uint8_t  Reserved;
 } FW_ATT_RECORD;
 
 static ssize_t amdgpu_fw_attestation_debugfs_read(struct file *f,

drivers/gpu/drm/amd/amdgpu/amdgpu_gem.c

@@ -619,7 +619,7 @@ int amdgpu_gem_va_ioctl(struct drm_device *dev, void *data,
 	int r = 0;
 
 	if (args->va_address < AMDGPU_VA_RESERVED_SIZE) {
-		dev_dbg(&dev->pdev->dev,
+		dev_dbg(dev->dev,
 			"va_address 0x%LX is in reserved area 0x%LX\n",
 			args->va_address, AMDGPU_VA_RESERVED_SIZE);
 		return -EINVAL;
@@ -627,7 +627,7 @@ int amdgpu_gem_va_ioctl(struct drm_device *dev, void *data,
 
 	if (args->va_address >= AMDGPU_GMC_HOLE_START &&
 	    args->va_address < AMDGPU_GMC_HOLE_END) {
-		dev_dbg(&dev->pdev->dev,
+		dev_dbg(dev->dev,
 			"va_address 0x%LX is in VA hole 0x%LX-0x%LX\n",
 			args->va_address, AMDGPU_GMC_HOLE_START,
 			AMDGPU_GMC_HOLE_END);
@@ -639,14 +639,14 @@ int amdgpu_gem_va_ioctl(struct drm_device *dev, void *data,
 	vm_size = adev->vm_manager.max_pfn * AMDGPU_GPU_PAGE_SIZE;
 	vm_size -= AMDGPU_VA_RESERVED_SIZE;
 	if (args->va_address + args->map_size > vm_size) {
-		dev_dbg(&dev->pdev->dev,
+		dev_dbg(dev->dev,
 			"va_address 0x%llx is in top reserved area 0x%llx\n",
 			args->va_address + args->map_size, vm_size);
 		return -EINVAL;
 	}
 
 	if ((args->flags & ~valid_flags) && (args->flags & ~prt_flags)) {
-		dev_dbg(&dev->pdev->dev, "invalid flags combination 0x%08X\n",
+		dev_dbg(dev->dev, "invalid flags combination 0x%08X\n",
 			args->flags);
 		return -EINVAL;
 	}
@@ -658,7 +658,7 @@ int amdgpu_gem_va_ioctl(struct drm_device *dev, void *data,
 	case AMDGPU_VA_OP_REPLACE:
 		break;
 	default:
-		dev_dbg(&dev->pdev->dev, "unsupported operation %d\n",
+		dev_dbg(dev->dev, "unsupported operation %d\n",
 			args->operation);
 		return -EINVAL;
 	}

drivers/gpu/drm/amd/amdgpu/amdgpu_gfx.c

@@ -193,15 +193,16 @@ static bool amdgpu_gfx_is_multipipe_capable(struct amdgpu_device *adev)
 }
 
 bool amdgpu_gfx_is_high_priority_compute_queue(struct amdgpu_device *adev,
-					       int pipe, int queue)
+					       struct amdgpu_ring *ring)
 {
-	bool multipipe_policy = amdgpu_gfx_is_multipipe_capable(adev);
+	/* Policy: use 1st queue as high priority compute queue if we
-	int cond;
+	 * have more than one compute queue.
-	/* Policy: alternate between normal and high priority */
+	 */
-	cond = multipipe_policy ? pipe : queue;
+	if (adev->gfx.num_compute_rings > 1 &&
-
+	    ring == &adev->gfx.compute_ring[0])
-	return ((cond % 2) != 0);
+		return true;
 
+	return false;
 }
 
 void amdgpu_gfx_compute_queue_acquire(struct amdgpu_device *adev)

drivers/gpu/drm/amd/amdgpu/amdgpu_gfx.h

@@ -380,7 +380,7 @@ void amdgpu_queue_mask_bit_to_mec_queue(struct amdgpu_device *adev, int bit,
 bool amdgpu_gfx_is_mec_queue_enabled(struct amdgpu_device *adev, int mec,
 				     int pipe, int queue);
 bool amdgpu_gfx_is_high_priority_compute_queue(struct amdgpu_device *adev,
-					       int pipe, int queue);
+					       struct amdgpu_ring *ring);
 int amdgpu_gfx_me_queue_to_bit(struct amdgpu_device *adev, int me,
 			       int pipe, int queue);
 void amdgpu_gfx_bit_to_me_queue(struct amdgpu_device *adev, int bit,

drivers/gpu/drm/amd/amdgpu/amdgpu_gmc.c

@@ -120,7 +120,7 @@ uint64_t amdgpu_gmc_agp_addr(struct ttm_buffer_object *bo)
 {
 	struct amdgpu_device *adev = amdgpu_ttm_adev(bo->bdev);
 
-	if (bo->num_pages != 1 || bo->ttm->caching == ttm_cached)
+	if (bo->ttm->num_pages != 1 || bo->ttm->caching == ttm_cached)
 		return AMDGPU_BO_INVALID_OFFSET;
 
 	if (bo->ttm->dma_address[0] + PAGE_SIZE >= adev->gmc.agp_size)

drivers/gpu/drm/amd/amdgpu/amdgpu_hdp.h

@@ -0,0 +1,40 @@
+/*
+ * Copyright 2020 Advanced Micro Devices, Inc.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ */
+#ifndef __AMDGPU_HDP_H__
+#define __AMDGPU_HDP_H__
+
+struct amdgpu_hdp_funcs {
+	void (*flush_hdp)(struct amdgpu_device *adev, struct amdgpu_ring *ring);
+	void (*invalidate_hdp)(struct amdgpu_device *adev,
+			       struct amdgpu_ring *ring);
+	void (*reset_ras_error_count)(struct amdgpu_device *adev);
+	void (*update_clock_gating)(struct amdgpu_device *adev, bool enable);
+	void (*get_clock_gating_state)(struct amdgpu_device *adev, u32 *flags);
+	void (*init_registers)(struct amdgpu_device *adev);
+};
+
+struct amdgpu_hdp {
+	const struct amdgpu_hdp_funcs		*funcs;
+};
+
+#endif /* __AMDGPU_HDP_H__ */

drivers/gpu/drm/amd/amdgpu/amdgpu_i2c.c

@@ -176,7 +176,7 @@ struct amdgpu_i2c_chan *amdgpu_i2c_create(struct drm_device *dev,
 	i2c->rec = *rec;
 	i2c->adapter.owner = THIS_MODULE;
 	i2c->adapter.class = I2C_CLASS_DDC;
-	i2c->adapter.dev.parent = &dev->pdev->dev;
+	i2c->adapter.dev.parent = dev->dev;
 	i2c->dev = dev;
 	i2c_set_adapdata(&i2c->adapter, i2c);
 	mutex_init(&i2c->mutex);

drivers/gpu/drm/amd/amdgpu/amdgpu_ib.c

@@ -195,6 +195,10 @@ int amdgpu_ib_schedule(struct amdgpu_ring *ring, unsigned num_ibs,
 	if ((ib->flags & AMDGPU_IB_FLAG_EMIT_MEM_SYNC) && ring->funcs->emit_mem_sync)
 		ring->funcs->emit_mem_sync(ring);
 
+	if (ring->funcs->emit_wave_limit &&
+	    ring->hw_prio == AMDGPU_GFX_PIPE_PRIO_HIGH)
+		ring->funcs->emit_wave_limit(ring, true);
+
 	if (ring->funcs->insert_start)
 		ring->funcs->insert_start(ring);
 
@@ -295,6 +299,11 @@ int amdgpu_ib_schedule(struct amdgpu_ring *ring, unsigned num_ibs,
 	ring->current_ctx = fence_ctx;
 	if (vm && ring->funcs->emit_switch_buffer)
 		amdgpu_ring_emit_switch_buffer(ring);
+
+	if (ring->funcs->emit_wave_limit &&
+	    ring->hw_prio == AMDGPU_GFX_PIPE_PRIO_HIGH)
+		ring->funcs->emit_wave_limit(ring, false);
+
 	amdgpu_ring_commit(ring);
 	return 0;
 }

drivers/gpu/drm/amd/amdgpu/amdgpu_ih.c

@@ -205,3 +205,48 @@ restart_ih:
 	return IRQ_HANDLED;
 }
 
+/**
+ * amdgpu_ih_decode_iv_helper - decode an interrupt vector
+ *
+ * @adev: amdgpu_device pointer
+ * @ih: ih ring to process
+ * @entry: IV entry
+ *
+ * Decodes the interrupt vector at the current rptr
+ * position and also advance the position for for Vega10
+ * and later GPUs.
+ */
+void amdgpu_ih_decode_iv_helper(struct amdgpu_device *adev,
+				struct amdgpu_ih_ring *ih,
+				struct amdgpu_iv_entry *entry)
+{
+	/* wptr/rptr are in bytes! */
+	u32 ring_index = ih->rptr >> 2;
+	uint32_t dw[8];
+
+	dw[0] = le32_to_cpu(ih->ring[ring_index + 0]);
+	dw[1] = le32_to_cpu(ih->ring[ring_index + 1]);
+	dw[2] = le32_to_cpu(ih->ring[ring_index + 2]);
+	dw[3] = le32_to_cpu(ih->ring[ring_index + 3]);
+	dw[4] = le32_to_cpu(ih->ring[ring_index + 4]);
+	dw[5] = le32_to_cpu(ih->ring[ring_index + 5]);
+	dw[6] = le32_to_cpu(ih->ring[ring_index + 6]);
+	dw[7] = le32_to_cpu(ih->ring[ring_index + 7]);
+
+	entry->client_id = dw[0] & 0xff;
+	entry->src_id = (dw[0] >> 8) & 0xff;
+	entry->ring_id = (dw[0] >> 16) & 0xff;
+	entry->vmid = (dw[0] >> 24) & 0xf;
+	entry->vmid_src = (dw[0] >> 31);
+	entry->timestamp = dw[1] | ((u64)(dw[2] & 0xffff) << 32);
+	entry->timestamp_src = dw[2] >> 31;
+	entry->pasid = dw[3] & 0xffff;
+	entry->pasid_src = dw[3] >> 31;
+	entry->src_data[0] = dw[4];
+	entry->src_data[1] = dw[5];
+	entry->src_data[2] = dw[6];
+	entry->src_data[3] = dw[7];
+
+	/* wptr/rptr are in bytes! */
+	ih->rptr += 32;
+}

drivers/gpu/drm/amd/amdgpu/amdgpu_ih.h

@@ -30,6 +30,18 @@
 struct amdgpu_device;
 struct amdgpu_iv_entry;
 
+struct amdgpu_ih_regs {
+	uint32_t ih_rb_base;
+	uint32_t ih_rb_base_hi;
+	uint32_t ih_rb_cntl;
+	uint32_t ih_rb_wptr;
+	uint32_t ih_rb_rptr;
+	uint32_t ih_doorbell_rptr;
+	uint32_t ih_rb_wptr_addr_lo;
+	uint32_t ih_rb_wptr_addr_hi;
+	uint32_t psp_reg_id;
+};
+
 /*
  * R6xx+ IH ring
  */
@@ -53,6 +65,7 @@ struct amdgpu_ih_ring {
 	bool                    enabled;
 	unsigned		rptr;
 	atomic_t		lock;
+	struct amdgpu_ih_regs	ih_regs;
 };
 
 /* provided by the ih block */
@@ -75,5 +88,7 @@ void amdgpu_ih_ring_fini(struct amdgpu_device *adev, struct amdgpu_ih_ring *ih);
 void amdgpu_ih_ring_write(struct amdgpu_ih_ring *ih, const uint32_t *iv,
 			  unsigned int num_dw);
 int amdgpu_ih_process(struct amdgpu_device *adev, struct amdgpu_ih_ring *ih);
-
+void amdgpu_ih_decode_iv_helper(struct amdgpu_device *adev,
+				struct amdgpu_ih_ring *ih,
+				struct amdgpu_iv_entry *entry);
 #endif

drivers/gpu/drm/amd/amdgpu/amdgpu_irq.c

@@ -444,7 +444,8 @@ void amdgpu_irq_dispatch(struct amdgpu_device *adev,
 	} else	if (src_id >= AMDGPU_MAX_IRQ_SRC_ID) {
 		DRM_DEBUG("Invalid src_id in IV: %d\n", src_id);
 
-	} else if (adev->irq.virq[src_id]) {
+	} else if ((client_id == AMDGPU_IRQ_CLIENTID_LEGACY) &&
+		   adev->irq.virq[src_id]) {
 		generic_handle_irq(irq_find_mapping(adev->irq.domain, src_id));
 
 	} else if (!adev->irq.client[client_id].sources) {