dt-bindings: pinctrl: Add bindings for Intel Keembay pinctrl driver
Add Device Tree bindings documentation for Intel Keem Bay SoC's pin controller. Add entry for INTEL Keem Bay pinctrl driver in MAINTAINERS file Co-developed-by: Vineetha G. Jaya Kumaran <vineetha.g.jaya.kumaran@intel.com> Signed-off-by: Vineetha G. Jaya Kumaran <vineetha.g.jaya.kumaran@intel.com> Co-developed-by: Vijayakannan Ayyathurai <vijayakannan.ayyathurai@intel.com> Signed-off-by: Vijayakannan Ayyathurai <vijayakannan.ayyathurai@intel.com> Signed-off-by: Lakshmi Sowjanya D <lakshmi.sowjanya.d@intel.com> Acked-by: Mark Gross <mgross@linux.intel.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20210806142527.29113-2-lakshmi.sowjanya.d@intel.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This commit is contained in:
Lakshmi Sowjanya D
Linus Walleij
parent
3fb5c90452
commit
d2083893e4
@ -0,0 +1,135 @@
|
||||
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/pinctrl/intel,pinctrl-keembay.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: Intel Keem Bay pin controller Device Tree Bindings
|
||||
|
||||
maintainers:
|
||||
- Lakshmi Sowjanya D <lakshmi.sowjanya.d@intel.com>
|
||||
|
||||
description: |
|
||||
Intel Keem Bay SoC integrates a pin controller which enables control
|
||||
of pin directions, input/output values and configuration
|
||||
for a total of 80 pins.
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
const: intel,keembay-pinctrl
|
||||
|
||||
reg:
|
||||
maxItems: 2
|
||||
|
||||
gpio-controller: true
|
||||
|
||||
'#gpio-cells':
|
||||
const: 2
|
||||
|
||||
ngpios:
|
||||
description: The number of GPIOs exposed.
|
||||
const: 80
|
||||
|
||||
interrupts:
|
||||
description:
|
||||
Specifies the interrupt lines to be used by the controller.
|
||||
Each interrupt line is shared by upto 4 GPIO lines.
|
||||
maxItems: 8
|
||||
|
||||
interrupt-controller: true
|
||||
|
||||
'#interrupt-cells':
|
||||
const: 2
|
||||
|
||||
patternProperties:
|
||||
'^gpio@[0-9a-f]*$':
|
||||
type: object
|
||||
|
||||
description:
|
||||
Child nodes can be specified to contain pin configuration information,
|
||||
which can then be utilized by pinctrl client devices.
|
||||
The following properties are supported.
|
||||
|
||||
properties:
|
||||
pins:
|
||||
description: |
|
||||
The name(s) of the pins to be configured in the child node.
|
||||
Supported pin names are "GPIO0" up to "GPIO79".
|
||||
|
||||
bias-disable: true
|
||||
|
||||
bias-pull-down: true
|
||||
|
||||
bias-pull-up: true
|
||||
|
||||
drive-strength:
|
||||
description: IO pads drive strength in milli Ampere.
|
||||
enum: [2, 4, 8, 12]
|
||||
|
||||
bias-bus-hold:
|
||||
type: boolean
|
||||
|
||||
input-schmitt-enable:
|
||||
type: boolean
|
||||
|
||||
slew-rate:
|
||||
description: GPIO slew rate control.
|
||||
0 - Fast(~100MHz)
|
||||
1 - Slow(~50MHz)
|
||||
enum: [0, 1]
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
- gpio-controller
|
||||
- ngpios
|
||||
- '#gpio-cells'
|
||||
- interrupts
|
||||
- interrupt-controller
|
||||
- '#interrupt-cells'
|
||||
|
||||
examples:
|
||||
- |
|
||||
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
||||
#include <dt-bindings/interrupt-controller/irq.h>
|
||||
// Example 1
|
||||
gpio@0 {
|
||||
compatible = "intel,keembay-pinctrl";
|
||||
reg = <0x600b0000 0x88>,
|
||||
<0x600b0190 0x1ac>;
|
||||
gpio-controller;
|
||||
ngpios = <0x50>;
|
||||
#gpio-cells = <0x2>;
|
||||
interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
};
|
||||
|
||||
// Example 2
|
||||
gpio@1 {
|
||||
compatible = "intel,keembay-pinctrl";
|
||||
reg = <0x600c0000 0x88>,
|
||||
<0x600c0190 0x1ac>;
|
||||
gpio-controller;
|
||||
ngpios = <0x50>;
|
||||
#gpio-cells = <0x2>;
|
||||
interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
};
|
||||
@ -14635,6 +14635,11 @@ S: Maintained
|
||||
T: git git://git.kernel.org/pub/scm/linux/kernel/git/pinctrl/intel.git
|
||||
F: drivers/pinctrl/intel/
|
||||
|
||||
PIN CONTROLLER - KEEMBAY
|
||||
M: Lakshmi Sowjanya D <lakshmi.sowjanya.d@intel.com>
|
||||
S: Supported
|
||||
F: drivers/pinctrl/pinctrl-keembay*
|
||||
|
||||
PIN CONTROLLER - MEDIATEK
|
||||
M: Sean Wang <sean.wang@kernel.org>
|
||||
L: linux-mediatek@lists.infradead.org (moderated for non-subscribers)
|
||||
|
||||
Loading…
Reference in New Issue
Block a user