fs/epoll: reduce the scope of wq lock in epoll_wait()

This patch aims at reducing ep wq.lock hold times in epoll_wait(2).  For
the blocking case, there is no need to constantly take and drop the
spinlock, which is only needed to manipulate the waitqueue.

The call to ep_events_available() is now lockless, and only exposed to
benign races.  Here, if false positive (returns available events and
does not see another thread deleting an epi from the list) we call into
send_events and then the list's state is correctly seen.  Otoh, if a
false negative and we don't see a list_add_tail(), for example, from irq
callback, then it is rechecked again before blocking, which will see the
correct state.

In order for more accuracy to see concurrent list_del_init(), use the
list_empty_careful() variant -- of course, this won't be safe against
insertions from wakeup.

For the overflow list we obviously need to prevent load/store tearing as
we don't want to see partial values while the ready list is disabled.

[dave@stgolabs.net: forgotten fixlets]
  Link: http://lkml.kernel.org/r/20181109155258.jxcr4t2pnz6zqct3@linux-r8p5
Link: http://lkml.kernel.org/r/20181108051006.18751-6-dave@stgolabs.net
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Suggested-by: Jason Baron <jbaron@akamai.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This commit is contained in:
Davidlohr Bueso 2019-01-03 15:27:15 -08:00 committed by Linus Torvalds
parent 21877e1a5b
commit c5a282e963

View File

@ -381,7 +381,8 @@ static void ep_nested_calls_init(struct nested_calls *ncalls)
*/
static inline int ep_events_available(struct eventpoll *ep)
{
return !list_empty(&ep->rdllist) || ep->ovflist != EP_UNACTIVE_PTR;
return !list_empty_careful(&ep->rdllist) ||
READ_ONCE(ep->ovflist) != EP_UNACTIVE_PTR;
}
#ifdef CONFIG_NET_RX_BUSY_POLL
@ -698,7 +699,7 @@ static __poll_t ep_scan_ready_list(struct eventpoll *ep,
*/
spin_lock_irq(&ep->wq.lock);
list_splice_init(&ep->rdllist, &txlist);
ep->ovflist = NULL;
WRITE_ONCE(ep->ovflist, NULL);
spin_unlock_irq(&ep->wq.lock);
/*
@ -712,7 +713,7 @@ static __poll_t ep_scan_ready_list(struct eventpoll *ep,
* other events might have been queued by the poll callback.
* We re-insert them inside the main ready-list here.
*/
for (nepi = ep->ovflist; (epi = nepi) != NULL;
for (nepi = READ_ONCE(ep->ovflist); (epi = nepi) != NULL;
nepi = epi->next, epi->next = EP_UNACTIVE_PTR) {
/*
* We need to check if the item is already in the list.
@ -730,7 +731,7 @@ static __poll_t ep_scan_ready_list(struct eventpoll *ep,
* releasing the lock, events will be queued in the normal way inside
* ep->rdllist.
*/
ep->ovflist = EP_UNACTIVE_PTR;
WRITE_ONCE(ep->ovflist, EP_UNACTIVE_PTR);
/*
* Quickly re-inject items left on "txlist".
@ -1153,10 +1154,10 @@ static int ep_poll_callback(wait_queue_entry_t *wait, unsigned mode, int sync, v
* semantics). All the events that happen during that period of time are
* chained in ep->ovflist and requeued later on.
*/
if (ep->ovflist != EP_UNACTIVE_PTR) {
if (READ_ONCE(ep->ovflist) != EP_UNACTIVE_PTR) {
if (epi->next == EP_UNACTIVE_PTR) {
epi->next = ep->ovflist;
ep->ovflist = epi;
epi->next = READ_ONCE(ep->ovflist);
WRITE_ONCE(ep->ovflist, epi);
if (epi->ws) {
/*
* Activate ep->ws since epi->ws may get
@ -1762,10 +1763,17 @@ static int ep_poll(struct eventpoll *ep, struct epoll_event __user *events,
} else if (timeout == 0) {
/*
* Avoid the unnecessary trip to the wait queue loop, if the
* caller specified a non blocking operation.
* caller specified a non blocking operation. We still need
* lock because we could race and not see an epi being added
* to the ready list while in irq callback. Thus incorrectly
* returning 0 back to userspace.
*/
timed_out = 1;
spin_lock_irq(&ep->wq.lock);
eavail = ep_events_available(ep);
spin_unlock_irq(&ep->wq.lock);
goto check_events;
}
@ -1774,64 +1782,62 @@ fetch_events:
if (!ep_events_available(ep))
ep_busy_loop(ep, timed_out);
spin_lock_irq(&ep->wq.lock);
if (!ep_events_available(ep)) {
/*
* Busy poll timed out. Drop NAPI ID for now, we can add
* it back in when we have moved a socket with a valid NAPI
* ID onto the ready list.
*/
ep_reset_busy_poll_napi_id(ep);
/*
* We don't have any available event to return to the caller.
* We need to sleep here, and we will be wake up by
* ep_poll_callback() when events will become available.
*/
init_waitqueue_entry(&wait, current);
__add_wait_queue_exclusive(&ep->wq, &wait);
for (;;) {
/*
* We don't want to sleep if the ep_poll_callback() sends us
* a wakeup in between. That's why we set the task state
* to TASK_INTERRUPTIBLE before doing the checks.
*/
set_current_state(TASK_INTERRUPTIBLE);
/*
* Always short-circuit for fatal signals to allow
* threads to make a timely exit without the chance of
* finding more events available and fetching
* repeatedly.
*/
if (fatal_signal_pending(current)) {
res = -EINTR;
break;
}
if (ep_events_available(ep) || timed_out)
break;
if (signal_pending(current)) {
res = -EINTR;
break;
}
spin_unlock_irq(&ep->wq.lock);
if (!schedule_hrtimeout_range(to, slack, HRTIMER_MODE_ABS))
timed_out = 1;
spin_lock_irq(&ep->wq.lock);
}
__remove_wait_queue(&ep->wq, &wait);
__set_current_state(TASK_RUNNING);
}
check_events:
/* Is it worth to try to dig for events ? */
eavail = ep_events_available(ep);
if (eavail)
goto check_events;
/*
* Busy poll timed out. Drop NAPI ID for now, we can add
* it back in when we have moved a socket with a valid NAPI
* ID onto the ready list.
*/
ep_reset_busy_poll_napi_id(ep);
/*
* We don't have any available event to return to the caller.
* We need to sleep here, and we will be wake up by
* ep_poll_callback() when events will become available.
*/
init_waitqueue_entry(&wait, current);
spin_lock_irq(&ep->wq.lock);
__add_wait_queue_exclusive(&ep->wq, &wait);
spin_unlock_irq(&ep->wq.lock);
for (;;) {
/*
* We don't want to sleep if the ep_poll_callback() sends us
* a wakeup in between. That's why we set the task state
* to TASK_INTERRUPTIBLE before doing the checks.
*/
set_current_state(TASK_INTERRUPTIBLE);
/*
* Always short-circuit for fatal signals to allow
* threads to make a timely exit without the chance of
* finding more events available and fetching
* repeatedly.
*/
if (fatal_signal_pending(current)) {
res = -EINTR;
break;
}
if (ep_events_available(ep) || timed_out)
break;
if (signal_pending(current)) {
res = -EINTR;
break;
}
if (!schedule_hrtimeout_range(to, slack, HRTIMER_MODE_ABS))
timed_out = 1;
}
__set_current_state(TASK_RUNNING);
spin_lock_irq(&ep->wq.lock);
__remove_wait_queue(&ep->wq, &wait);
spin_unlock_irq(&ep->wq.lock);
check_events:
/*
* Try to transfer events to user space. In case we get 0 events and
* there's still timeout left over, we go trying again in search of