dt-bindings:iio:potentiometer:maxim,max5481 move to trivial devices

Simple SPI binding that doesn't need a separate file.
During conversion I looked up the individual part number descriptions
in the datasheet so that we could give slightly more detail in
trivial-device.yaml.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Slawomir Stepien <sst@poczta.fm>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: Maury Anderson <maury.anderson@rockwellcollins.com>
Cc: Matthew Weber <matthew.weber@rockwellcollins.com>
Cc: Slawomir Stepien <sst@poczta.fm>
Link: https://lore.kernel.org/r/20201031182922.743153-5-jic23@kernel.org
This commit is contained in:
Jonathan Cameron 2020-10-31 18:29:19 +00:00
parent 6d3766da16
commit b25e67b290
2 changed files with 8 additions and 23 deletions

View File

@ -1,23 +0,0 @@
* Maxim Linear-Taper Digital Potentiometer MAX5481-MAX5484
The node for this driver must be a child node of a SPI controller, hence
all mandatory properties described in
Documentation/devicetree/bindings/spi/spi-bus.txt
must be specified.
Required properties:
- compatible: Must be one of the following, depending on the
model:
"maxim,max5481"
"maxim,max5482"
"maxim,max5483"
"maxim,max5484"
Example:
max548x: max548x@0 {
compatible = "maxim,max5482";
spi-max-frequency = <7000000>;
reg = <0>; /* chip-select */
};

View File

@ -126,6 +126,14 @@ properties:
- maxim,max1231
# Low-Power, 4-/12-Channel, 2-Wire Serial, 12-Bit ADCs
- maxim,max1237
# 10-bit 10 kOhm linear programable voltage divider
- maxim,max5481
# 10-bit 50 kOhm linear programable voltage divider
- maxim,max5482
# 10-bit 10 kOhm linear programable variable resistor
- maxim,max5483
# 10-bit 50 kOhm linear programable variable resistor
- maxim,max5484
# PECI-to-I2C translator for PECI-to-SMBus/I2C protocol conversion
- maxim,max6621
# 9-Bit/12-Bit Temperature Sensors with I²C-Compatible Serial Interface