USB: changes for v5.7 merge window

Lots of changes on dwc3 this time, most of them from Thinh fixing a
 bunch of really old mishaps on the driver.
 
 DWC2 got support for STM32MP15 and a couple RockChip SoCs while DWC3
 learned about Amlogic A1 family.
 
 Apart from these, we have a few spelling fixes and other minor
 non-critical fixes all over the place.
 
 Signed-off-by: Felipe Balbi <balbi@kernel.org>
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEElLzh7wn96CXwjh2IzL64meEamQYFAl5uL0YRHGJhbGJpQGtl
 cm5lbC5vcmcACgkQzL64meEamQYLSg//dnxrqey6J8hRGYdp9h5Dm0SQxhxp9KCW
 IyL7L287W2D9+JCtoXYrCOlvNM7vMJwwiI3O5XvuRbwllJPUC37HidrFwvOEhqDZ
 BV4J+A30U7OLBlikyzkY/m3I2F94E0DR6PdTsoNVcA3s6GTPs0oDUcKy8ZckDs9/
 Fg21Y3GZplVdtCvbHU/q6Ou7iulm2lZlZg+RC/u3edmRycJ1S29BKxnL40C63hiD
 8kd4rQ/679IIsmV6JAhUWJAS1/3XZG68ozyWEcKiu8kltyAv7L2ponmKA9jiP+1C
 5+EPPvW7xyYb2vkY7N85jR+MjzsF5VK9O4LXPsoPQ/lDW9IZ83zZvOPJ9UuKQwzW
 iqaocn1SB+Ovx2lQZv3kjv6v6nKCzE7HfTVFQSk/ycV8aprXeOzItO+dJ4mPjsXy
 uX1hWePs5/9bG1Cr3apoVSf9x+6v4+MNY/qmxcyzrBkXpcmDan6SemkWNgtceVW/
 RScdyHdhVNVU22hPblADP4oNTOjHRYpQR4TvS9KXcv7Qjb+alN44JcsYWyAGSHLa
 Mb3oEDsJ4lvzIaVL/p23ISIPa+aXWgN3VBrwtErUofYQCNEqLia8D/ofncTkHvKp
 0aquwfTO+0UVeFvuPcD13TQ66RwfNPWcxMGz36hEzmJqcsKFTcS47QFS6I8KRd7M
 ab8AAFqizwo=
 =L9gx
 -----END PGP SIGNATURE-----

Merge tag 'usb-for-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next

Felipe writes:

USB: changes for v5.7 merge window

Lots of changes on dwc3 this time, most of them from Thinh fixing a
bunch of really old mishaps on the driver.

DWC2 got support for STM32MP15 and a couple RockChip SoCs while DWC3
learned about Amlogic A1 family.

Apart from these, we have a few spelling fixes and other minor
non-critical fixes all over the place.

Signed-off-by: Felipe Balbi <balbi@kernel.org>

* tag 'usb-for-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb: (41 commits)
  dt-bindings: usb: add documentation for aspeed usb-vhub
  ARM: dts: aspeed-g4: add vhub port and endpoint properties
  ARM: dts: aspeed-g5: add vhub port and endpoint properties
  ARM: dts: aspeed-g6: add usb functions
  usb: gadget: aspeed: add ast2600 vhub support
  usb: gadget: aspeed: read vhub properties from device tree
  usb: gadget: aspeed: support per-vhub usb descriptors
  usb: gadget: f_phonet: Replace zero-length array with flexible-array member
  usb: gadget: composite: Inform controller driver of self-powered
  usb: gadget: amd5536udc: fix spelling mistake "reserverd" -> "reserved"
  udc: s3c-hsudc: Silence warning about supplies during deferred probe
  usb: dwc2: Silence warning about supplies during deferred probe
  dt-bindings: usb: dwc2: add compatible property for rk3368 usb
  dt-bindings: usb: dwc2: add compatible property for rk3328 usb
  usb: gadget: add raw-gadget interface
  usb: dwc2: Implement set_selfpowered()
  usb: dwc3: qcom: Replace <linux/clk-provider.h> by <linux/of_clk.h>
  usb: dwc3: core: don't do suspend for device mode if already suspended
  usb: dwc3: Rework resets initialization to be more flexible
  usb: dwc3: Rework clock initialization to be more flexible
  ...

Documentation/devicetree/bindings/usb/amlogic,meson-g12a-usb-ctrl.yaml

@@ -22,10 +22,14 @@ description: |
   The DWC3 Glue controls the PHY routing and power, an interrupt line is
   connected to the Glue to serve as OTG ID change detection.
 
+  The Amlogic A1 embeds a DWC3 USB IP Core configured for USB2 in
+  host-only mode.
+
 properties:
   compatible:
     enum:
       - amlogic,meson-g12a-usb-ctrl
+      - amlogic,meson-a1-usb-ctrl
 
   ranges: true
 
@@ -84,6 +88,25 @@ required:
   - phys
   - dr_mode
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          enum:
+            - amlogic,meson-a1-usb-ctrl
+
+    then:
+      properties:
+        clocks:
+          minItems: 3
+        clock-names:
+          items:
+            - const: usb_ctrl
+            - const: usb_bus
+            - const: xtal_usb_ctrl
+      required:
+        - clock-names
+
 examples:
   - |
     usb: usb@ffe09000 {

Documentation/devicetree/bindings/usb/aspeed,usb-vhub.yaml

@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (c) 2020 Facebook Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/aspeed,usb-vhub.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ASPEED USB 2.0 Virtual Hub Controller
+
+maintainers:
+  - Benjamin Herrenschmidt <benh@kernel.crashing.org>
+
+description: |+
+  The ASPEED USB 2.0 Virtual Hub Controller implements 1 set of USB Hub
+  register and several sets of Device and Endpoint registers to support
+  the Virtual Hub's downstream USB devices.
+
+  Supported number of devices and endpoints vary depending on hardware
+  revisions. AST2400 and AST2500 Virtual Hub supports 5 downstream devices
+  and 15 generic endpoints, while AST2600 Virtual Hub supports 7 downstream
+  devices and 21 generic endpoints.
+
+properties:
+  compatible:
+    enum:
+      - aspeed,ast2400-usb-vhub
+      - aspeed,ast2500-usb-vhub
+      - aspeed,ast2600-usb-vhub
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  aspeed,vhub-downstream-ports:
+    description: Number of downstream ports supported by the Virtual Hub
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32
+      - default: 5
+        minimum: 1
+        maximum: 7
+
+  aspeed,vhub-generic-endpoints:
+    description: Number of generic endpoints supported by the Virtual Hub
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32
+      - default: 15
+        minimum: 1
+        maximum: 21
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - interrupts
+  - aspeed,vhub-downstream-ports
+  - aspeed,vhub-generic-endpoints
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/aspeed-clock.h>
+    vhub: usb-vhub@1e6a0000 {
+            compatible = "aspeed,ast2500-usb-vhub";
+            reg = <0x1e6a0000 0x300>;
+            interrupts = <5>;
+            clocks = <&syscon ASPEED_CLK_GATE_USBPORT1CLK>;
+            aspeed,vhub-downstream-ports = <5>;
+            aspeed,vhub-generic-endpoints = <15>;
+            pinctrl-names = "default";
+            pinctrl-0 = <&pinctrl_usb2ad_default>;
+    };

Documentation/devicetree/bindings/usb/dwc2.yaml

@@ -18,27 +18,15 @@ properties:
           - const: rockchip,rk3066-usb
           - const: snps,dwc2
       - items:
-          - const: rockchip,px30-usb
+          - enum:
-          - const: rockchip,rk3066-usb
+            - rockchip,px30-usb
-          - const: snps,dwc2
+            - rockchip,rk3036-usb
-      - items:
+            - rockchip,rk3188-usb
-          - const: rockchip,rk3036-usb
+            - rockchip,rk3228-usb
-          - const: rockchip,rk3066-usb
+            - rockchip,rk3288-usb
-          - const: snps,dwc2
+            - rockchip,rk3328-usb
-      - items:
+            - rockchip,rk3368-usb
-          - const: rockchip,rv1108-usb
+            - rockchip,rv1108-usb
-          - const: rockchip,rk3066-usb
-          - const: snps,dwc2
-      - items:
-          - const: rockchip,rk3188-usb
-          - const: rockchip,rk3066-usb
-          - const: snps,dwc2
-      - items:
-          - const: rockchip,rk3228-usb
-          - const: rockchip,rk3066-usb
-          - const: snps,dwc2
-      - items:
-          - const: rockchip,rk3288-usb
           - const: rockchip,rk3066-usb
           - const: snps,dwc2
       - const: lantiq,arx100-usb

Documentation/devicetree/bindings/usb/dwc3.txt

@@ -7,7 +7,8 @@ Required properties:
  - compatible: must be "snps,dwc3"
  - reg : Address and length of the register set for the device
  - interrupts: Interrupts used by the dwc3 controller.
- - clock-names: should contain "ref", "bus_early", "suspend"
+ - clock-names: list of clock names. Ideally should be "ref",
+                "bus_early", "suspend" but may be less or more.
  - clocks: list of phandle and clock specifier pairs corresponding to
            entries in the clock-names property.
 
@@ -36,7 +37,7 @@ Optional properties:
  - phys: from the *Generic PHY* bindings
  - phy-names: from the *Generic PHY* bindings; supported names are "usb2-phy"
 	or "usb3-phy".
- - resets: a single pair of phandle and reset specifier
+ - resets: set of phandle and reset specifier pairs
  - snps,usb2-lpm-disable: indicate if we don't want to enable USB2 HW LPM
  - snps,usb3_lpm_capable: determines if platform is USB3 LPM capable
  - snps,dis-start-transfer-quirk: when set, disable isoc START TRANSFER command
@@ -75,6 +76,8 @@ Optional properties:
 			from P0 to P1/P2/P3 without delay.
  - snps,dis-tx-ipgap-linecheck-quirk: when set, disable u2mac linestate check
 			during HS transmit.
+ - snps,parkmode-disable-ss-quirk: when set, all SuperSpeed bus instances in
+			park mode are disabled.
  - snps,dis_metastability_quirk: when set, disable metastability workaround.
 			CAUTION: use only if you are absolutely sure of it.
  - snps,is-utmi-l1-suspend: true when DWC3 asserts output signal

Documentation/devicetree/bindings/usb/generic.txt

@@ -35,6 +35,12 @@ Optional properties:
 			the USB data role (USB host or USB device) for a given
 			USB connector, such as Type-C, Type-B(micro).
 			see connector/usb-connector.txt.
+ - role-switch-default-mode: indicating if usb-role-switch is enabled, the
+			device default operation mode of controller while usb
+			role is USB_ROLE_NONE. Valid arguments are "host" and
+			"peripheral". Defaults to "peripheral" if not
+			specified.
+
 
 This is an attribute to a USB controller such as:
 

Documentation/devicetree/bindings/usb/maxim,max3420-udc.yaml

@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/maxim,max3420-udc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MAXIM MAX3420/1 USB Peripheral Controller
+
+maintainers:
+  - Jassi Brar <jaswinder.singh@linaro.org>
+
+description: |
+  The controller provices USB2.0 compliant FullSpeed peripheral
+  implementation over the SPI interface.
+
+  Specifications about the part can be found at:
+    http://datasheets.maximintegrated.com/en/ds/MAX3420E.pdf
+
+properties:
+  compatible:
+    enum:
+      - maxim,max3420-udc
+      - maxim,max3421-udc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: usb irq from max3420
+      - description: vbus detection irq
+    minItems: 1
+    maxItems: 2
+
+  interrupt-names:
+    items:
+      - const: udc
+      - const: vbus
+    minItems: 1
+    maxItems: 2
+
+  spi-max-frequency:
+    maximum: 26000000
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+
+additionalProperties: false
+
+examples:
+  - |
+      #include <dt-bindings/gpio/gpio.h>
+      #include <dt-bindings/interrupt-controller/irq.h>
+      spi0 {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            udc@0 {
+                  compatible = "maxim,max3420-udc";
+                  reg = <0>;
+                  interrupt-parent = <&gpio>;
+                  interrupts = <0 IRQ_TYPE_EDGE_FALLING>, <10 IRQ_TYPE_EDGE_BOTH>;
+                  interrupt-names = "udc", "vbus";
+                  spi-max-frequency = <12500000>;
+            };
+      };

Documentation/usb/index.rst

@@ -22,6 +22,7 @@ USB support
     misc_usbsevseg
     mtouchusb
     ohci
+    raw-gadget
     usbip_protocol
     usbmon
     usb-serial

Documentation/usb/raw-gadget.rst

@@ -0,0 +1,61 @@
+==============
+USB Raw Gadget
+==============
+
+USB Raw Gadget is a kernel module that provides a userspace interface for
+the USB Gadget subsystem. Essentially it allows to emulate USB devices
+from userspace. Enabled with CONFIG_USB_RAW_GADGET. Raw Gadget is
+currently a strictly debugging feature and shouldn't be used in
+production, use GadgetFS instead.
+
+Comparison to GadgetFS
+~~~~~~~~~~~~~~~~~~~~~~
+
+Raw Gadget is similar to GadgetFS, but provides a more low-level and
+direct access to the USB Gadget layer for the userspace. The key
+differences are:
+
+1. Every USB request is passed to the userspace to get a response, while
+   GadgetFS responds to some USB requests internally based on the provided
+   descriptors. However note, that the UDC driver might respond to some
+   requests on its own and never forward them to the Gadget layer.
+
+2. GadgetFS performs some sanity checks on the provided USB descriptors,
+   while Raw Gadget allows you to provide arbitrary data as responses to
+   USB requests.
+
+3. Raw Gadget provides a way to select a UDC device/driver to bind to,
+   while GadgetFS currently binds to the first available UDC.
+
+4. Raw Gadget uses predictable endpoint names (handles) across different
+   UDCs (as long as UDCs have enough endpoints of each required transfer
+   type).
+
+5. Raw Gadget has ioctl-based interface instead of a filesystem-based one.
+
+Userspace interface
+~~~~~~~~~~~~~~~~~~~
+
+To create a Raw Gadget instance open /dev/raw-gadget. Multiple raw-gadget
+instances (bound to different UDCs) can be used at the same time. The
+interaction with the opened file happens through the ioctl() calls, see
+comments in include/uapi/linux/usb/raw_gadget.h for details.
+
+The typical usage of Raw Gadget looks like:
+
+1. Open Raw Gadget instance via /dev/raw-gadget.
+2. Initialize the instance via USB_RAW_IOCTL_INIT.
+3. Launch the instance with USB_RAW_IOCTL_RUN.
+4. In a loop issue USB_RAW_IOCTL_EVENT_FETCH calls to receive events from
+   Raw Gadget and react to those depending on what kind of USB device
+   needs to be emulated.
+
+Potential future improvements
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+- Implement ioctl's for setting/clearing halt status on endpoints.
+
+- Reporting more events (suspend, resume, etc.) through
+  USB_RAW_IOCTL_EVENT_FETCH.
+
+- Support O_NONBLOCK I/O.

arch/arm/boot/dts/aspeed-g4.dtsi

@@ -164,6 +164,8 @@
 			reg = <0x1e6a0000 0x300>;
 			interrupts = <5>;
 			clocks = <&syscon ASPEED_CLK_GATE_USBPORT1CLK>;
+			aspeed,vhub-downstream-ports = <5>;
+			aspeed,vhub-generic-endpoints = <15>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_usb2d_default>;
 			status = "disabled";

arch/arm/boot/dts/aspeed-g5.dtsi

@@ -195,6 +195,8 @@
 			reg = <0x1e6a0000 0x300>;
 			interrupts = <5>;
 			clocks = <&syscon ASPEED_CLK_GATE_USBPORT1CLK>;
+			aspeed,vhub-downstream-ports = <5>;
+			aspeed,vhub-generic-endpoints = <15>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_usb2ad_default>;
 			status = "disabled";

arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi

@@ -1112,6 +1112,31 @@
 		groups = "UART9";
 	};
 
+	pinctrl_usb2ah_default: usb2ah_default {
+		function = "USB2AH";
+		groups = "USBA";
+	};
+
+	pinctrl_usb2ad_default: usb2ad_default {
+		function = "USB2AD";
+		groups = "USBA";
+	};
+
+	pinctrl_usb2bh_default: usb2bh_default {
+		function = "USB2BH";
+		groups = "USBB";
+	};
+
+	pinctrl_usb2bd_default: usb2bd_default {
+		function = "USB2BD";
+		groups = "USBB";
+	};
+
+	pinctrl_usb11bhid_default: usb11bhid_default {
+		function = "USB11BHID";
+		groups = "USBB";
+	};
+
 	pinctrl_vb_default: vb_default {
 		function = "VB";
 		groups = "VB";

arch/arm/boot/dts/aspeed-g6.dtsi

@@ -245,6 +245,51 @@
 			status = "disabled";
 		};
 
+		ehci0: usb@1e6a1000 {
+			compatible = "aspeed,ast2600-ehci", "generic-ehci";
+			reg = <0x1e6a1000 0x100>;
+			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&syscon ASPEED_CLK_GATE_USBPORT1CLK>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb2ah_default>;
+			status = "disabled";
+		};
+
+		ehci1: usb@1e6a3000 {
+			compatible = "aspeed,ast2600-ehci", "generic-ehci";
+			reg = <0x1e6a3000 0x100>;
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&syscon ASPEED_CLK_GATE_USBPORT2CLK>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb2bh_default>;
+			status = "disabled";
+		};
+
+		uhci: usb@1e6b0000 {
+			compatible = "aspeed,ast2600-uhci", "generic-uhci";
+			reg = <0x1e6b0000 0x100>;
+			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+			#ports = <2>;
+			clocks = <&syscon ASPEED_CLK_GATE_USBUHCICLK>;
+			status = "disabled";
+			/*
+			 * No default pinmux, it will follow EHCI, use an
+			 * explicit pinmux override if EHCI is not enabled.
+			 */
+		};
+
+		vhub: usb-vhub@1e6a0000 {
+			compatible = "aspeed,ast2600-usb-vhub";
+			reg = <0x1e6a0000 0x350>;
+			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&syscon ASPEED_CLK_GATE_USBPORT1CLK>;
+			aspeed,vhub-downstream-ports = <7>;
+			aspeed,vhub-generic-endpoints = <21>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb2ad_default>;
+			status = "disabled";
+		};
+
 		apb {
 			compatible = "simple-bus";
 			#address-cells = <1>;

drivers/usb/dwc2/core.h

@@ -411,6 +411,10 @@ enum dwc2_ep0_state {
  *			register.
  *			0 - Deactivate the transceiver (default)
  *			1 - Activate the transceiver
+ * @activate_stm_id_vb_detection: Activate external ID pin and Vbus level
+ *			detection using GGPIO register.
+ *			0 - Deactivate the external level detection (default)
+ *			1 - Activate the external level detection
  * @g_dma:              Enables gadget dma usage (default: autodetect).
  * @g_dma_desc:         Enables gadget descriptor DMA (default: autodetect).
  * @g_rx_fifo_size:	The periodic rx fifo size for the device, in
@@ -481,6 +485,7 @@ struct dwc2_core_params {
 	bool service_interval;
 	u8 hird_threshold;
 	bool activate_stm_fs_transceiver;
+	bool activate_stm_id_vb_detection;
 	bool ipg_isoc_en;
 	u16 max_packet_count;
 	u32 max_transfer_size;
@@ -874,6 +879,8 @@ struct dwc2_hregs_backup {
  *                      removed once all SoCs support usb transceiver.
  * @supplies:           Definition of USB power supplies
  * @vbus_supply:        Regulator supplying vbus.
+ * @usb33d:		Optional 3.3v regulator used on some stm32 devices to
+ *			supply ID and VBUS detection hardware.
  * @lock:		Spinlock that protects all the driver data structures
  * @priv:		Stores a pointer to the struct usb_hcd
  * @queuing_high_bandwidth: True if multiple packets of a high-bandwidth
@@ -1061,6 +1068,7 @@ struct dwc2_hsotg {
 	struct dwc2_hsotg_plat *plat;
 	struct regulator_bulk_data supplies[DWC2_NUM_SUPPLIES];
 	struct regulator *vbus_supply;
+	struct regulator *usb33d;
 
 	spinlock_t lock;
 	void *priv;

drivers/usb/dwc2/gadget.c

@@ -1646,7 +1646,8 @@ static int dwc2_hsotg_process_req_status(struct dwc2_hsotg *hsotg,
 
 	switch (ctrl->bRequestType & USB_RECIP_MASK) {
 	case USB_RECIP_DEVICE:
-		status = 1 << USB_DEVICE_SELF_POWERED;
+		status = hsotg->gadget.is_selfpowered <<
+			 USB_DEVICE_SELF_POWERED;
 		status |= hsotg->remote_wakeup_allowed <<
 			  USB_DEVICE_REMOTE_WAKEUP;
 		reply = cpu_to_le16(status);
@@ -4527,6 +4528,26 @@ static int dwc2_hsotg_gadget_getframe(struct usb_gadget *gadget)
 	return dwc2_hsotg_read_frameno(to_hsotg(gadget));
 }
 
+/**
+ * dwc2_hsotg_set_selfpowered - set if device is self/bus powered
+ * @gadget: The usb gadget state
+ * @is_selfpowered: Whether the device is self-powered
+ *
+ * Set if the device is self or bus powered.
+ */
+static int dwc2_hsotg_set_selfpowered(struct usb_gadget *gadget,
+				      int is_selfpowered)
+{
+	struct dwc2_hsotg *hsotg = to_hsotg(gadget);
+	unsigned long flags;
+
+	spin_lock_irqsave(&hsotg->lock, flags);
+	gadget->is_selfpowered = !!is_selfpowered;
+	spin_unlock_irqrestore(&hsotg->lock, flags);
+
+	return 0;
+}
+
 /**
  * dwc2_hsotg_pullup - connect/disconnect the USB PHY
  * @gadget: The usb gadget state
@@ -4618,6 +4639,7 @@ static int dwc2_hsotg_vbus_draw(struct usb_gadget *gadget, unsigned int mA)
 
 static const struct usb_gadget_ops dwc2_hsotg_gadget_ops = {
 	.get_frame	= dwc2_hsotg_gadget_getframe,
+	.set_selfpowered	= dwc2_hsotg_set_selfpowered,
 	.udc_start		= dwc2_hsotg_udc_start,
 	.udc_stop		= dwc2_hsotg_udc_stop,
 	.pullup                 = dwc2_hsotg_pullup,

drivers/usb/dwc2/hw.h

@@ -54,6 +54,12 @@
 #define GOTGCTL_HSTSETHNPEN		BIT(10)
 #define GOTGCTL_HNPREQ			BIT(9)
 #define GOTGCTL_HSTNEGSCS		BIT(8)
+#define GOTGCTL_BVALOVAL		BIT(7)
+#define GOTGCTL_BVALOEN			BIT(6)
+#define GOTGCTL_AVALOVAL		BIT(5)
+#define GOTGCTL_AVALOEN			BIT(4)
+#define GOTGCTL_VBVALOVAL		BIT(3)
+#define GOTGCTL_VBVALOEN		BIT(2)
 #define GOTGCTL_SESREQ			BIT(1)
 #define GOTGCTL_SESREQSCS		BIT(0)
 
@@ -227,6 +233,8 @@
 #define GPVNDCTL			HSOTG_REG(0x0034)
 #define GGPIO				HSOTG_REG(0x0038)
 #define GGPIO_STM32_OTG_GCCFG_PWRDWN	BIT(16)
+#define GGPIO_STM32_OTG_GCCFG_VBDEN	BIT(21)
+#define GGPIO_STM32_OTG_GCCFG_IDEN	BIT(22)
 
 #define GUID				HSOTG_REG(0x003c)
 #define GSNPSID				HSOTG_REG(0x0040)

drivers/usb/dwc2/params.c

@@ -163,6 +163,35 @@ static void dwc2_set_stm32f7_hsotg_params(struct dwc2_hsotg *hsotg)
 	p->host_perio_tx_fifo_size = 256;
 }
 
+static void dwc2_set_stm32mp15_fsotg_params(struct dwc2_hsotg *hsotg)
+{
+	struct dwc2_core_params *p = &hsotg->params;
+
+	p->otg_cap = DWC2_CAP_PARAM_NO_HNP_SRP_CAPABLE;
+	p->speed = DWC2_SPEED_PARAM_FULL;
+	p->host_rx_fifo_size = 128;
+	p->host_nperio_tx_fifo_size = 96;
+	p->host_perio_tx_fifo_size = 96;
+	p->max_packet_count = 256;
+	p->phy_type = DWC2_PHY_TYPE_PARAM_FS;
+	p->i2c_enable = false;
+	p->activate_stm_fs_transceiver = true;
+	p->activate_stm_id_vb_detection = true;
+	p->power_down = DWC2_POWER_DOWN_PARAM_NONE;
+}
+
+static void dwc2_set_stm32mp15_hsotg_params(struct dwc2_hsotg *hsotg)
+{
+	struct dwc2_core_params *p = &hsotg->params;
+
+	p->otg_cap = DWC2_CAP_PARAM_NO_HNP_SRP_CAPABLE;
+	p->activate_stm_id_vb_detection = true;
+	p->host_rx_fifo_size = 440;
+	p->host_nperio_tx_fifo_size = 256;
+	p->host_perio_tx_fifo_size = 256;
+	p->power_down = DWC2_POWER_DOWN_PARAM_NONE;
+}
+
 const struct of_device_id dwc2_of_match_table[] = {
 	{ .compatible = "brcm,bcm2835-usb", .data = dwc2_set_bcm_params },
 	{ .compatible = "hisilicon,hi6220-usb", .data = dwc2_set_his_params  },
@@ -186,6 +215,10 @@ const struct of_device_id dwc2_of_match_table[] = {
 	{ .compatible = "st,stm32f4x9-hsotg" },
 	{ .compatible = "st,stm32f7-hsotg",
 	  .data = dwc2_set_stm32f7_hsotg_params },
+	{ .compatible = "st,stm32mp15-fsotg",
+	  .data = dwc2_set_stm32mp15_fsotg_params },
+	{ .compatible = "st,stm32mp15-hsotg",
+	  .data = dwc2_set_stm32mp15_hsotg_params },
 	{},
 };
 MODULE_DEVICE_TABLE(of, dwc2_of_match_table);

drivers/usb/dwc2/platform.c

@@ -285,7 +285,9 @@ static int dwc2_lowlevel_hw_init(struct dwc2_hsotg *hsotg)
 	ret = devm_regulator_bulk_get(hsotg->dev, ARRAY_SIZE(hsotg->supplies),
 				      hsotg->supplies);
 	if (ret) {
-		dev_err(hsotg->dev, "failed to request supplies: %d\n", ret);
+		if (ret != -EPROBE_DEFER)
+			dev_err(hsotg->dev, "failed to request supplies: %d\n",
+				ret);
 		return ret;
 	}
 	return 0;
@@ -312,6 +314,9 @@ static int dwc2_driver_remove(struct platform_device *dev)
 	if (hsotg->gadget_enabled)
 		dwc2_hsotg_remove(hsotg);
 
+	if (hsotg->params.activate_stm_id_vb_detection)
+		regulator_disable(hsotg->usb33d);
+
 	if (hsotg->ll_hw_enabled)
 		dwc2_lowlevel_hw_disable(hsotg);
 
@@ -464,10 +469,35 @@ static int dwc2_driver_probe(struct platform_device *dev)
 	if (retval)
 		goto error;
 
+	if (hsotg->params.activate_stm_id_vb_detection) {
+		u32 ggpio;
+
+		hsotg->usb33d = devm_regulator_get(hsotg->dev, "usb33d");
+		if (IS_ERR(hsotg->usb33d)) {
+			retval = PTR_ERR(hsotg->usb33d);
+			if (retval != -EPROBE_DEFER)
+				dev_err(hsotg->dev,
+					"failed to request usb33d supply: %d\n",
+					retval);
+			goto error;
+		}
+		retval = regulator_enable(hsotg->usb33d);
+		if (retval) {
+			dev_err(hsotg->dev,
+				"failed to enable usb33d supply: %d\n", retval);
+			goto error;
+		}
+
+		ggpio = dwc2_readl(hsotg, GGPIO);
+		ggpio |= GGPIO_STM32_OTG_GCCFG_IDEN;
+		ggpio |= GGPIO_STM32_OTG_GCCFG_VBDEN;
+		dwc2_writel(hsotg, ggpio, GGPIO);
+	}
+
 	if (hsotg->dr_mode != USB_DR_MODE_HOST) {
 		retval = dwc2_gadget_init(hsotg);
 		if (retval)
-			goto error;
+			goto error_init;
 		hsotg->gadget_enabled = 1;
 	}
 
@@ -493,7 +523,7 @@ static int dwc2_driver_probe(struct platform_device *dev)
 		if (retval) {
 			if (hsotg->gadget_enabled)
 				dwc2_hsotg_remove(hsotg);
-			goto error;
+			goto error_init;
 		}
 		hsotg->hcd_enabled = 1;
 	}
@@ -509,6 +539,9 @@ static int dwc2_driver_probe(struct platform_device *dev)
 
 	return 0;
 
+error_init:
+	if (hsotg->params.activate_stm_id_vb_detection)
+		regulator_disable(hsotg->usb33d);
 error:
 	dwc2_lowlevel_hw_disable(hsotg);
 	return retval;
@@ -523,6 +556,37 @@ static int __maybe_unused dwc2_suspend(struct device *dev)
 	if (is_device_mode)
 		dwc2_hsotg_suspend(dwc2);
 
+	if (dwc2->params.activate_stm_id_vb_detection) {
+		unsigned long flags;
+		u32 ggpio, gotgctl;
+
+		/*
+		 * Need to force the mode to the current mode to avoid Mode
+		 * Mismatch Interrupt when ID detection will be disabled.
+		 */
+		dwc2_force_mode(dwc2, !is_device_mode);
+
+		spin_lock_irqsave(&dwc2->lock, flags);
+		gotgctl = dwc2_readl(dwc2, GOTGCTL);
+		/* bypass debounce filter, enable overrides */
+		gotgctl |= GOTGCTL_DBNCE_FLTR_BYPASS;
+		gotgctl |= GOTGCTL_BVALOEN | GOTGCTL_AVALOEN;
+		/* Force A / B session if needed */
+		if (gotgctl & GOTGCTL_ASESVLD)
+			gotgctl |= GOTGCTL_AVALOVAL;
+		if (gotgctl & GOTGCTL_BSESVLD)
+			gotgctl |= GOTGCTL_BVALOVAL;
+		dwc2_writel(dwc2, gotgctl, GOTGCTL);
+		spin_unlock_irqrestore(&dwc2->lock, flags);
+
+		ggpio = dwc2_readl(dwc2, GGPIO);
+		ggpio &= ~GGPIO_STM32_OTG_GCCFG_IDEN;
+		ggpio &= ~GGPIO_STM32_OTG_GCCFG_VBDEN;
+		dwc2_writel(dwc2, ggpio, GGPIO);
+
+		regulator_disable(dwc2->usb33d);
+	}
+
 	if (dwc2->ll_hw_enabled &&
 	    (is_device_mode || dwc2_host_can_poweroff_phy(dwc2))) {
 		ret = __dwc2_lowlevel_hw_disable(dwc2);
@@ -544,6 +608,34 @@ static int __maybe_unused dwc2_resume(struct device *dev)
 	}
 	dwc2->phy_off_for_suspend = false;
 
+	if (dwc2->params.activate_stm_id_vb_detection) {
+		unsigned long flags;
+		u32 ggpio, gotgctl;
+
+		ret = regulator_enable(dwc2->usb33d);
+		if (ret)
+			return ret;
+
+		ggpio = dwc2_readl(dwc2, GGPIO);
+		ggpio |= GGPIO_STM32_OTG_GCCFG_IDEN;
+		ggpio |= GGPIO_STM32_OTG_GCCFG_VBDEN;
+		dwc2_writel(dwc2, ggpio, GGPIO);
+
+		/* ID/VBUS detection startup time */
+		usleep_range(5000, 7000);
+
+		spin_lock_irqsave(&dwc2->lock, flags);
+		gotgctl = dwc2_readl(dwc2, GOTGCTL);
+		gotgctl &= ~GOTGCTL_DBNCE_FLTR_BYPASS;
+		gotgctl &= ~(GOTGCTL_BVALOEN | GOTGCTL_AVALOEN |
+			     GOTGCTL_BVALOVAL | GOTGCTL_AVALOVAL);
+		dwc2_writel(dwc2, gotgctl, GOTGCTL);
+		spin_unlock_irqrestore(&dwc2->lock, flags);
+	}
+
+	/* Need to restore FORCEDEVMODE/FORCEHOSTMODE */
+	dwc2_force_dr_mode(dwc2);
+
 	if (dwc2_is_device_mode(dwc2))
 		ret = dwc2_hsotg_resume(dwc2);
 

drivers/usb/dwc3/core.c

@@ -289,12 +289,6 @@ done:
 	return 0;
 }
 
-static const struct clk_bulk_data dwc3_core_clks[] = {
-	{ .id = "ref" },
-	{ .id = "bus_early" },
-	{ .id = "suspend" },
-};
-
 /*
  * dwc3_frame_length_adjustment - Adjusts frame length if required
  * @dwc3: Pointer to our controller context structure
@@ -1029,6 +1023,9 @@ static int dwc3_core_init(struct dwc3 *dwc)
 		if (dwc->dis_tx_ipgap_linecheck_quirk)
 			reg |= DWC3_GUCTL1_TX_IPGAP_LINECHECK_DIS;
 
+		if (dwc->parkmode_disable_ss_quirk)
+			reg |= DWC3_GUCTL1_PARKMODE_DISABLE_SS;
+
 		dwc3_writel(dwc->regs, DWC3_GUCTL1, reg);
 	}
 
@@ -1342,6 +1339,8 @@ static void dwc3_get_properties(struct dwc3 *dwc)
 				"snps,dis-del-phy-power-chg-quirk");
 	dwc->dis_tx_ipgap_linecheck_quirk = device_property_read_bool(dev,
 				"snps,dis-tx-ipgap-linecheck-quirk");
+	dwc->parkmode_disable_ss_quirk = device_property_read_bool(dev,
+				"snps,parkmode-disable-ss-quirk");
 
 	dwc->tx_de_emphasis_quirk = device_property_read_bool(dev,
 				"snps,tx_de_emphasis_quirk");
@@ -1441,11 +1440,6 @@ static int dwc3_probe(struct platform_device *pdev)
 	if (!dwc)
 		return -ENOMEM;
 
-	dwc->clks = devm_kmemdup(dev, dwc3_core_clks, sizeof(dwc3_core_clks),
-				 GFP_KERNEL);
-	if (!dwc->clks)
-		return -ENOMEM;
-
 	dwc->dev = dev;
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
@@ -1476,22 +1470,23 @@ static int dwc3_probe(struct platform_device *pdev)
 
 	dwc3_get_properties(dwc);
 
-	dwc->reset = devm_reset_control_get_optional_shared(dev, NULL);
+	dwc->reset = devm_reset_control_array_get(dev, true, true);
 	if (IS_ERR(dwc->reset))
 		return PTR_ERR(dwc->reset);
 
 	if (dev->of_node) {
-		dwc->num_clks = ARRAY_SIZE(dwc3_core_clks);
+		ret = devm_clk_bulk_get_all(dev, &dwc->clks);
-
-		ret = devm_clk_bulk_get(dev, dwc->num_clks, dwc->clks);
 		if (ret == -EPROBE_DEFER)
 			return ret;
 		/*
 		 * Clocks are optional, but new DT platforms should support all
 		 * clocks as required by the DT-binding.
 		 */
-		if (ret)
+		if (ret < 0)
 			dwc->num_clks = 0;
+		else
+			dwc->num_clks = ret;
+
 	}
 
 	ret = reset_control_deassert(dwc->reset);
@@ -1637,6 +1632,8 @@ static int dwc3_suspend_common(struct dwc3 *dwc, pm_message_t msg)
 
 	switch (dwc->current_dr_role) {
 	case DWC3_GCTL_PRTCAP_DEVICE:
+		if (pm_runtime_suspended(dwc->dev))
+			break;
 		spin_lock_irqsave(&dwc->lock, flags);
 		dwc3_gadget_suspend(dwc);
 		spin_unlock_irqrestore(&dwc->lock, flags);

drivers/usb/dwc3/core.h

@@ -25,6 +25,7 @@
 #include <linux/usb/ch9.h>
 #include <linux/usb/gadget.h>
 #include <linux/usb/otg.h>
+#include <linux/usb/role.h>
 #include <linux/ulpi/interface.h>
 
 #include <linux/phy/phy.h>
@@ -249,6 +250,7 @@
 #define DWC3_GUCTL_HSTINAUTORETRY	BIT(14)
 
 /* Global User Control 1 Register */
+#define DWC3_GUCTL1_PARKMODE_DISABLE_SS	BIT(17)
 #define DWC3_GUCTL1_TX_IPGAP_LINECHECK_DIS	BIT(28)
 #define DWC3_GUCTL1_DEV_L1_EXIT_BY_HW	BIT(24)
 
@@ -953,6 +955,9 @@ struct dwc3_scratchpad_array {
  * @hsphy_mode: UTMI phy mode, one of following:
  *		- USBPHY_INTERFACE_MODE_UTMI
  *		- USBPHY_INTERFACE_MODE_UTMIW
+ * @role_sw: usb_role_switch handle
+ * @role_switch_default_mode: default operation mode of controller while
+ *			usb role is USB_ROLE_NONE.
  * @usb2_phy: pointer to USB2 PHY
  * @usb3_phy: pointer to USB3 PHY
  * @usb2_generic_phy: pointer to USB2 PHY
@@ -1024,6 +1029,8 @@ struct dwc3_scratchpad_array {
  *			change quirk.
  * @dis_tx_ipgap_linecheck_quirk: set if we disable u2mac linestate
  *			check during HS transmit.
+ * @parkmode_disable_ss_quirk: set if we need to disable all SuperSpeed
+ *			instances in park mode.
  * @tx_de_emphasis_quirk: set if we enable Tx de-emphasis quirk
  * @tx_de_emphasis: Tx de-emphasis value
  * 	0	- -6dB de-emphasis
@@ -1086,6 +1093,8 @@ struct dwc3 {
 	struct extcon_dev	*edev;
 	struct notifier_block	edev_nb;
 	enum usb_phy_interface	hsphy_mode;
+	struct usb_role_switch	*role_sw;
+	enum usb_dr_mode	role_switch_default_mode;
 
 	u32			fladj;
 	u32			irq_gadget;
@@ -1215,6 +1224,7 @@ struct dwc3 {
 	unsigned		dis_u2_freeclk_exists_quirk:1;
 	unsigned		dis_del_phy_power_chg_quirk:1;
 	unsigned		dis_tx_ipgap_linecheck_quirk:1;
+	unsigned		parkmode_disable_ss_quirk:1;
 
 	unsigned		tx_de_emphasis_quirk:1;
 	unsigned		tx_de_emphasis:2;

drivers/usb/dwc3/drd.c

@@ -476,6 +476,92 @@ static struct extcon_dev *dwc3_get_extcon(struct dwc3 *dwc)
 	return edev;
 }
 
+#if IS_ENABLED(CONFIG_USB_ROLE_SWITCH)
+#define ROLE_SWITCH 1
+static int dwc3_usb_role_switch_set(struct device *dev, enum usb_role role)
+{
+	struct dwc3 *dwc = dev_get_drvdata(dev);
+	u32 mode;
+
+	switch (role) {
+	case USB_ROLE_HOST:
+		mode = DWC3_GCTL_PRTCAP_HOST;
+		break;
+	case USB_ROLE_DEVICE:
+		mode = DWC3_GCTL_PRTCAP_DEVICE;
+		break;
+	default:
+		if (dwc->role_switch_default_mode == USB_DR_MODE_HOST)
+			mode = DWC3_GCTL_PRTCAP_HOST;
+		else
+			mode = DWC3_GCTL_PRTCAP_DEVICE;
+		break;
+	}
+
+	dwc3_set_mode(dwc, mode);
+	return 0;
+}
+
+static enum usb_role dwc3_usb_role_switch_get(struct device *dev)
+{
+	struct dwc3 *dwc = dev_get_drvdata(dev);
+	unsigned long flags;
+	enum usb_role role;
+
+	spin_lock_irqsave(&dwc->lock, flags);
+	switch (dwc->current_dr_role) {
+	case DWC3_GCTL_PRTCAP_HOST:
+		role = USB_ROLE_HOST;
+		break;
+	case DWC3_GCTL_PRTCAP_DEVICE:
+		role = USB_ROLE_DEVICE;
+		break;
+	case DWC3_GCTL_PRTCAP_OTG:
+		role = dwc->current_otg_role;
+		break;
+	default:
+		if (dwc->role_switch_default_mode == USB_DR_MODE_HOST)
+			role = USB_ROLE_HOST;
+		else
+			role = USB_ROLE_DEVICE;
+		break;
+	}
+	spin_unlock_irqrestore(&dwc->lock, flags);
+	return role;
+}
+
+static int dwc3_setup_role_switch(struct dwc3 *dwc)
+{
+	struct usb_role_switch_desc dwc3_role_switch = {NULL};
+	const char *str;
+	u32 mode;
+	int ret;
+
+	ret = device_property_read_string(dwc->dev, "role-switch-default-mode",
+					  &str);
+	if (ret >= 0  && !strncmp(str, "host", strlen("host"))) {
+		dwc->role_switch_default_mode = USB_DR_MODE_HOST;
+		mode = DWC3_GCTL_PRTCAP_HOST;
+	} else {
+		dwc->role_switch_default_mode = USB_DR_MODE_PERIPHERAL;
+		mode = DWC3_GCTL_PRTCAP_DEVICE;
+	}
+
+	dwc3_role_switch.fwnode = dev_fwnode(dwc->dev);
+	dwc3_role_switch.set = dwc3_usb_role_switch_set;
+	dwc3_role_switch.get = dwc3_usb_role_switch_get;
+	dwc->role_sw = usb_role_switch_register(dwc->dev, &dwc3_role_switch);
+	if (IS_ERR(dwc->role_sw))
+		return PTR_ERR(dwc->role_sw);
+
+	dwc3_set_mode(dwc, mode);
+	return 0;
+}
+#else
+#define ROLE_SWITCH 0
+#define dwc3_setup_role_switch(x) 0
+#endif
+
 int dwc3_drd_init(struct dwc3 *dwc)
 {
 	int ret, irq;
@@ -484,7 +570,12 @@ int dwc3_drd_init(struct dwc3 *dwc)
 	if (IS_ERR(dwc->edev))
 		return PTR_ERR(dwc->edev);
 
-	if (dwc->edev) {
+	if (ROLE_SWITCH &&
+	    device_property_read_bool(dwc->dev, "usb-role-switch")) {
+		ret = dwc3_setup_role_switch(dwc);
+		if (ret < 0)
+			return ret;
+	} else if (dwc->edev) {
 		dwc->edev_nb.notifier_call = dwc3_drd_notifier;
 		ret = extcon_register_notifier(dwc->edev, EXTCON_USB_HOST,
 					       &dwc->edev_nb);
@@ -531,6 +622,9 @@ void dwc3_drd_exit(struct dwc3 *dwc)
 {
 	unsigned long flags;
 
+	if (dwc->role_sw)
+		usb_role_switch_unregister(dwc->role_sw);
+
 	if (dwc->edev)
 		extcon_unregister_notifier(dwc->edev, EXTCON_USB_HOST,
 					   &dwc->edev_nb);

drivers/usb/dwc3/dwc3-exynos.c

@@ -162,6 +162,12 @@ static const struct dwc3_exynos_driverdata exynos5250_drvdata = {
 	.suspend_clk_idx = -1,
 };
 
+static const struct dwc3_exynos_driverdata exynos5420_drvdata = {
+	.clk_names = { "usbdrd30", "usbdrd30_susp_clk"},
+	.num_clks = 2,
+	.suspend_clk_idx = 1,
+};
+
 static const struct dwc3_exynos_driverdata exynos5433_drvdata = {
 	.clk_names = { "aclk", "susp_clk", "pipe_pclk", "phyclk" },
 	.num_clks = 4,
@@ -178,6 +184,9 @@ static const struct of_device_id exynos_dwc3_match[] = {
 	{
 		.compatible = "samsung,exynos5250-dwusb3",
 		.data = &exynos5250_drvdata,
+	}, {
+		.compatible = "samsung,exynos5420-dwusb3",
+		.data = &exynos5420_drvdata,
 	}, {
 		.compatible = "samsung,exynos5433-dwusb3",
 		.data = &exynos5433_drvdata,

drivers/usb/dwc3/dwc3-meson-g12a.c

@@ -107,10 +107,37 @@ static const char *phy_names[PHY_COUNT] = {
 	"usb2-phy0", "usb2-phy1", "usb3-phy0",
 };
 
+static struct clk_bulk_data meson_g12a_clocks[] = {
+	{ .id = NULL },
+};
+
+static struct clk_bulk_data meson_a1_clocks[] = {
+	{ .id = "usb_ctrl" },
+	{ .id = "usb_bus" },
+	{ .id = "xtal_usb_ctrl" },
+};
+
+struct dwc3_meson_g12a_drvdata {
+	bool otg_switch_supported;
+	struct clk_bulk_data *clks;
+	int num_clks;
+};
+
+static struct dwc3_meson_g12a_drvdata g12a_drvdata = {
+	.otg_switch_supported = true,
+	.clks = meson_g12a_clocks,
+	.num_clks = ARRAY_SIZE(meson_g12a_clocks),
+};
+
+static struct dwc3_meson_g12a_drvdata a1_drvdata = {
+	.otg_switch_supported = false,
+	.clks = meson_a1_clocks,
+	.num_clks = ARRAY_SIZE(meson_a1_clocks),
+};
+
 struct dwc3_meson_g12a {
 	struct device		*dev;
 	struct regmap		*regmap;
-	struct clk		*clk;
 	struct reset_control	*reset;
 	struct phy		*phys[PHY_COUNT];
 	enum usb_dr_mode	otg_mode;
@@ -120,6 +147,7 @@ struct dwc3_meson_g12a {
 	struct regulator	*vbus;
 	struct usb_role_switch_desc switch_desc;
 	struct usb_role_switch	*role_switch;
+	const struct dwc3_meson_g12a_drvdata *drvdata;
 };
 
 static void dwc3_meson_g12a_usb2_set_mode(struct dwc3_meson_g12a *priv,
@@ -151,7 +179,7 @@ static int dwc3_meson_g12a_usb2_init(struct dwc3_meson_g12a *priv)
 				   U2P_R0_POWER_ON_RESET,
 				   U2P_R0_POWER_ON_RESET);
 
-		if (i == USB2_OTG_PHY) {
+		if (priv->drvdata->otg_switch_supported && i == USB2_OTG_PHY) {
 			regmap_update_bits(priv->regmap,
 				U2P_R0 + (U2P_REG_SIZE * i),
 				U2P_R0_ID_PULLUP | U2P_R0_DRV_VBUS,
@@ -295,7 +323,7 @@ static int dwc3_meson_g12a_otg_mode_set(struct dwc3_meson_g12a *priv,
 {
 	int ret;
 
-	if (!priv->phys[USB2_OTG_PHY])
+	if (!priv->drvdata->otg_switch_supported || !priv->phys[USB2_OTG_PHY])
 		return -EINVAL;
 
 	if (mode == PHY_MODE_USB_HOST)
@@ -381,73 +409,15 @@ static struct device *dwc3_meson_g12_find_child(struct device *dev,
 	return &pdev->dev;
 }
 
-static int dwc3_meson_g12a_probe(struct platform_device *pdev)
+static int dwc3_meson_g12a_otg_init(struct platform_device *pdev,
+				    struct dwc3_meson_g12a *priv)
 {
-	struct dwc3_meson_g12a	*priv;
-	struct device		*dev = &pdev->dev;
-	struct device_node	*np = dev->of_node;
-	void __iomem *base;
 	enum phy_mode otg_id;
-	int ret, i, irq;
+	int ret, irq;
+	struct device *dev = &pdev->dev;
 
-	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv->drvdata->otg_switch_supported)
-	if (!priv)
+		return 0;
-		return -ENOMEM;
-
-	base = devm_platform_ioremap_resource(pdev, 0);
-	if (IS_ERR(base))
-		return PTR_ERR(base);
-
-	priv->regmap = devm_regmap_init_mmio(dev, base,
-					     &phy_meson_g12a_usb3_regmap_conf);
-	if (IS_ERR(priv->regmap))
-		return PTR_ERR(priv->regmap);
-
-	priv->vbus = devm_regulator_get_optional(dev, "vbus");
-	if (IS_ERR(priv->vbus)) {
-		if (PTR_ERR(priv->vbus) == -EPROBE_DEFER)
-			return PTR_ERR(priv->vbus);
-		priv->vbus = NULL;
-	}
-
-	priv->clk = devm_clk_get(dev, NULL);
-	if (IS_ERR(priv->clk))
-		return PTR_ERR(priv->clk);
-
-	ret = clk_prepare_enable(priv->clk);
-	if (ret)
-		return ret;
-
-	devm_add_action_or_reset(dev,
-				 (void(*)(void *))clk_disable_unprepare,
-				 priv->clk);
-
-	platform_set_drvdata(pdev, priv);
-	priv->dev = dev;
-
-	priv->reset = devm_reset_control_get(dev, NULL);
-	if (IS_ERR(priv->reset)) {
-		ret = PTR_ERR(priv->reset);
-		dev_err(dev, "failed to get device reset, err=%d\n", ret);
-		return ret;
-	}
-
-	ret = reset_control_reset(priv->reset);
-	if (ret)
-		return ret;
-
-	ret = dwc3_meson_g12a_get_phys(priv);
-	if (ret)
-		return ret;
-
-	if (priv->vbus) {
-		ret = regulator_enable(priv->vbus);
-		if (ret)
-			return ret;
-	}
-
-	/* Get dr_mode */
-	priv->otg_mode = usb_get_dr_mode(dev);
 
 	if (priv->otg_mode == USB_DR_MODE_OTG) {
 		/* Ack irq before registering */
@@ -462,28 +432,6 @@ static int dwc3_meson_g12a_probe(struct platform_device *pdev)
 			return ret;
 	}
 
-	dwc3_meson_g12a_usb_init(priv);
-
-	/* Init PHYs */
-	for (i = 0 ; i < PHY_COUNT ; ++i) {
-		ret = phy_init(priv->phys[i]);
-		if (ret)
-			return ret;
-	}
-
-	/* Set PHY Power */
-	for (i = 0 ; i < PHY_COUNT ; ++i) {
-		ret = phy_power_on(priv->phys[i]);
-		if (ret)
-			goto err_phys_exit;
-	}
-
-	ret = of_platform_populate(np, NULL, NULL, dev);
-	if (ret) {
-		clk_disable_unprepare(priv->clk);
-		goto err_phys_power;
-	}
-
 	/* Setup OTG mode corresponding to the ID pin */
 	if (priv->otg_mode == USB_DR_MODE_OTG) {
 		otg_id = dwc3_meson_g12a_get_id(priv);
@@ -506,6 +454,101 @@ static int dwc3_meson_g12a_probe(struct platform_device *pdev)
 	if (IS_ERR(priv->role_switch))
 		dev_warn(dev, "Unable to register Role Switch\n");
 
+	return 0;
+}
+
+static int dwc3_meson_g12a_probe(struct platform_device *pdev)
+{
+	struct dwc3_meson_g12a	*priv;
+	struct device		*dev = &pdev->dev;
+	struct device_node	*np = dev->of_node;
+	void __iomem *base;
+	int ret, i;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(base))
+		return PTR_ERR(base);
+
+	priv->regmap = devm_regmap_init_mmio(dev, base,
+					     &phy_meson_g12a_usb3_regmap_conf);
+	if (IS_ERR(priv->regmap))
+		return PTR_ERR(priv->regmap);
+
+	priv->vbus = devm_regulator_get_optional(dev, "vbus");
+	if (IS_ERR(priv->vbus)) {
+		if (PTR_ERR(priv->vbus) == -EPROBE_DEFER)
+			return PTR_ERR(priv->vbus);
+		priv->vbus = NULL;
+	}
+
+	priv->drvdata = of_device_get_match_data(&pdev->dev);
+
+	ret = devm_clk_bulk_get(dev,
+				priv->drvdata->num_clks,
+				priv->drvdata->clks);
+	if (ret)
+		return ret;
+
+	ret = clk_bulk_prepare_enable(priv->drvdata->num_clks,
+				      priv->drvdata->clks);
+	if (ret)
+		return ret;
+
+	platform_set_drvdata(pdev, priv);
+	priv->dev = dev;
+
+	priv->reset = devm_reset_control_get(dev, NULL);
+	if (IS_ERR(priv->reset)) {
+		ret = PTR_ERR(priv->reset);
+		dev_err(dev, "failed to get device reset, err=%d\n", ret);
+		return ret;
+	}
+
+	ret = reset_control_reset(priv->reset);
+	if (ret)
+		goto err_disable_clks;
+
+	ret = dwc3_meson_g12a_get_phys(priv);
+	if (ret)
+		goto err_disable_clks;
+
+	if (priv->vbus) {
+		ret = regulator_enable(priv->vbus);
+		if (ret)
+			goto err_disable_clks;
+	}
+
+	/* Get dr_mode */
+	priv->otg_mode = usb_get_dr_mode(dev);
+
+	dwc3_meson_g12a_usb_init(priv);
+
+	/* Init PHYs */
+	for (i = 0 ; i < PHY_COUNT ; ++i) {
+		ret = phy_init(priv->phys[i]);
+		if (ret)
+			goto err_disable_clks;
+	}
+
+	/* Set PHY Power */
+	for (i = 0 ; i < PHY_COUNT ; ++i) {
+		ret = phy_power_on(priv->phys[i]);
+		if (ret)
+			goto err_phys_exit;
+	}
+
+	ret = of_platform_populate(np, NULL, NULL, dev);
+	if (ret)
+		goto err_phys_power;
+
+	ret = dwc3_meson_g12a_otg_init(pdev, priv);
+	if (ret)
+		goto err_phys_power;
+
 	pm_runtime_set_active(dev);
 	pm_runtime_enable(dev);
 	pm_runtime_get_sync(dev);
@@ -520,6 +563,10 @@ err_phys_exit:
 	for (i = 0 ; i < PHY_COUNT ; ++i)
 		phy_exit(priv->phys[i]);
 
+err_disable_clks:
+	clk_bulk_disable_unprepare(priv->drvdata->num_clks,
+				   priv->drvdata->clks);
+
 	return ret;
 }
 
@@ -529,7 +576,8 @@ static int dwc3_meson_g12a_remove(struct platform_device *pdev)
 	struct device *dev = &pdev->dev;
 	int i;
 
-	usb_role_switch_unregister(priv->role_switch);
+	if (priv->drvdata->otg_switch_supported)
+		usb_role_switch_unregister(priv->role_switch);
 
 	of_platform_depopulate(dev);
 
@@ -542,6 +590,9 @@ static int dwc3_meson_g12a_remove(struct platform_device *pdev)
 	pm_runtime_put_noidle(dev);
 	pm_runtime_set_suspended(dev);
 
+	clk_bulk_disable_unprepare(priv->drvdata->num_clks,
+				   priv->drvdata->clks);
+
 	return 0;
 }
 
@@ -549,7 +600,8 @@ static int __maybe_unused dwc3_meson_g12a_runtime_suspend(struct device *dev)
 {
 	struct dwc3_meson_g12a	*priv = dev_get_drvdata(dev);
 
-	clk_disable(priv->clk);
+	clk_bulk_disable_unprepare(priv->drvdata->num_clks,
+				   priv->drvdata->clks);
 
 	return 0;
 }
@@ -558,7 +610,8 @@ static int __maybe_unused dwc3_meson_g12a_runtime_resume(struct device *dev)
 {
 	struct dwc3_meson_g12a	*priv = dev_get_drvdata(dev);
 
-	return clk_enable(priv->clk);
+	return clk_bulk_prepare_enable(priv->drvdata->num_clks,
+				       priv->drvdata->clks);
 }
 
 static int __maybe_unused dwc3_meson_g12a_suspend(struct device *dev)
@@ -621,7 +674,14 @@ static const struct dev_pm_ops dwc3_meson_g12a_dev_pm_ops = {
 };
 
 static const struct of_device_id dwc3_meson_g12a_match[] = {
-	{ .compatible = "amlogic,meson-g12a-usb-ctrl" },
+	{
+		.compatible = "amlogic,meson-g12a-usb-ctrl",
+		.data = &g12a_drvdata,
+	},
+	{
+		.compatible = "amlogic,meson-a1-usb-ctrl",
+		.data = &a1_drvdata,
+	},
 	{ /* Sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, dwc3_meson_g12a_match);

drivers/usb/dwc3/gadget.c

@@ -1521,7 +1521,7 @@ static void dwc3_gadget_ep_skip_trbs(struct dwc3_ep *dep, struct dwc3_request *r
 	for (i = 0; i < req->num_trbs; i++) {
 		struct dwc3_trb *trb;
 
-		trb = req->trb + i;
+		trb = &dep->trb_pool[dep->trb_dequeue];
 		trb->ctrl &= ~DWC3_TRB_CTRL_HWO;
 		dwc3_ep_inc_deq(dep);
 	}
@@ -2570,10 +2570,8 @@ static void dwc3_gadget_endpoint_transfer_in_progress(struct dwc3_ep *dep,
 
 	dwc3_gadget_ep_cleanup_completed_requests(dep, event, status);
 
-	if (stop) {
+	if (stop)
 		dwc3_stop_active_transfer(dep, true, true);
-		dep->flags = DWC3_EP_ENABLED;
-	}
 
 	/*
 	 * WORKAROUND: This is the 2nd half of U1/U2 -> U0 workaround.

drivers/usb/dwc3/host.c

@@ -1,5 +1,5 @@
 // SPDX-License-Identifier: GPL-2.0
-/**
+/*
  * host.c - DesignWare USB3 DRD Controller Host Glue
  *
  * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com
@@ -7,6 +7,7 @@
  * Authors: Felipe Balbi <balbi@ti.com>,
  */
 
+#include <linux/acpi.h>
 #include <linux/platform_device.h>
 
 #include "core.h"
@@ -75,6 +76,7 @@ int dwc3_host_init(struct dwc3 *dwc)
 	}
 
 	xhci->dev.parent	= dwc->dev;
+	ACPI_COMPANION_SET(&xhci->dev, ACPI_COMPANION(dwc->dev));
 
 	dwc->xhci = xhci;
 

drivers/usb/dwc3/trace.h

@@ -227,6 +227,8 @@ DECLARE_EVENT_CLASS(dwc3_log_trb,
 		__field(u32, size)
 		__field(u32, ctrl)
 		__field(u32, type)
+		__field(u32, enqueue)
+		__field(u32, dequeue)
 	),
 	TP_fast_assign(
 		__assign_str(name, dep->name);
@@ -236,9 +238,12 @@ DECLARE_EVENT_CLASS(dwc3_log_trb,
 		__entry->size = trb->size;
 		__entry->ctrl = trb->ctrl;
 		__entry->type = usb_endpoint_type(dep->endpoint.desc);
+		__entry->enqueue = dep->trb_enqueue;
+		__entry->dequeue = dep->trb_dequeue;
 	),
-	TP_printk("%s: trb %p buf %08x%08x size %s%d ctrl %08x (%c%c%c%c:%c%c:%s)",
+	TP_printk("%s: trb %p (E%d:D%d) buf %08x%08x size %s%d ctrl %08x (%c%c%c%c:%c%c:%s)",
-		__get_str(name), __entry->trb, __entry->bph, __entry->bpl,
+		__get_str(name), __entry->trb, __entry->enqueue,
+		__entry->dequeue, __entry->bph, __entry->bpl,
 		({char *s;
 		int pcm = ((__entry->size >> 24) & 3) + 1;
 		switch (__entry->type) {

drivers/usb/gadget/composite.c

@@ -861,6 +861,11 @@ static int set_config(struct usb_composite_dev *cdev,
 	else
 		power = min(power, 900U);
 done:
+	if (power <= USB_SELF_POWER_VBUS_MAX_DRAW)
+		usb_gadget_set_selfpowered(gadget);
+	else
+		usb_gadget_clear_selfpowered(gadget);
+
 	usb_gadget_vbus_draw(gadget, power);
 	if (result >= 0 && cdev->delayed_status)
 		result = USB_GADGET_DELAYED_STATUS;
@@ -2279,6 +2284,7 @@ void composite_suspend(struct usb_gadget *gadget)
 
 	cdev->suspended = 1;
 
+	usb_gadget_set_selfpowered(gadget);
 	usb_gadget_vbus_draw(gadget, 2);
 }
 
@@ -2307,6 +2313,9 @@ void composite_resume(struct usb_gadget *gadget)
 		else
 			maxpower = min(maxpower, 900U);
 
+		if (maxpower > USB_SELF_POWER_VBUS_MAX_DRAW)
+			usb_gadget_clear_selfpowered(gadget);
+
 		usb_gadget_vbus_draw(gadget, maxpower);
 	}
 

drivers/usb/gadget/legacy/Kconfig

@@ -516,4 +516,15 @@ config USB_G_WEBCAM
 	  Say "y" to link the driver statically, or "m" to build a
 	  dynamically linked module called "g_webcam".
 
+config USB_RAW_GADGET
+	tristate "USB Raw Gadget"
+	help
+	  USB Raw Gadget is a kernel module that provides a userspace interface
+	  for the USB Gadget subsystem. Essentially it allows to emulate USB
+	  devices from userspace. See Documentation/usb/raw-gadget.rst for
+	  details.
+
+	  Say "y" to link the driver statically, or "m" to build a
+	  dynamically linked module called "raw_gadget".
+
 endchoice

drivers/usb/gadget/legacy/Makefile

@@ -43,3 +43,4 @@ obj-$(CONFIG_USB_G_WEBCAM)	+= g_webcam.o
 obj-$(CONFIG_USB_G_NCM)		+= g_ncm.o
 obj-$(CONFIG_USB_G_ACM_MS)	+= g_acm_ms.o
 obj-$(CONFIG_USB_GADGET_TARGET)	+= tcm_usb_gadget.o
+obj-$(CONFIG_USB_RAW_GADGET)	+= raw_gadget.o

drivers/usb/gadget/udc/Kconfig

@@ -441,6 +441,16 @@ config USB_GADGET_XILINX
 	  dynamically linked module called "udc-xilinx" and force all
 	  gadget drivers to also be dynamically linked.
 
+config USB_MAX3420_UDC
+	tristate "MAX3420 (USB-over-SPI) support"
+	depends on SPI
+	help
+	  The Maxim MAX3420 chip supports USB2.0 full-speed peripheral mode.
+	  The MAX3420 is run by SPI interface, and hence the dependency.
+
+	  To compile this driver as a module, choose M here: the module will
+	  be called max3420_udc
+
 config USB_TEGRA_XUDC
 	tristate "NVIDIA Tegra Superspeed USB 3.0 Device Controller"
 	depends on ARCH_TEGRA || COMPILE_TEST

drivers/usb/gadget/udc/Makefile

@@ -42,3 +42,4 @@ obj-$(CONFIG_USB_GADGET_XILINX)	+= udc-xilinx.o
 obj-$(CONFIG_USB_SNP_UDC_PLAT) += snps_udc_plat.o
 obj-$(CONFIG_USB_ASPEED_VHUB)	+= aspeed-vhub/
 obj-$(CONFIG_USB_BDC_UDC)	+= bdc/
+obj-$(CONFIG_USB_MAX3420_UDC)	+= max3420_udc.o

drivers/usb/gadget/udc/aspeed-vhub/Kconfig

@@ -4,5 +4,5 @@ config USB_ASPEED_VHUB
 	depends on ARCH_ASPEED || COMPILE_TEST
 	depends on USB_LIBCOMPOSITE
 	help
-	  USB peripheral controller for the Aspeed AST2500 family
+	  USB peripheral controller for the Aspeed AST2400, AST2500 and
-	  SoCs supporting the "vHub" functionality and USB2.0
+	  AST2600 family SoCs supporting the "vHub" functionality and USB2.0

drivers/usb/gadget/udc/aspeed-vhub/core.c

@@ -99,7 +99,7 @@ static irqreturn_t ast_vhub_irq(int irq, void *data)
 {
 	struct ast_vhub *vhub = data;
 	irqreturn_t iret = IRQ_NONE;
-	u32 istat;
+	u32 i, istat;
 
 	/* Stale interrupt while tearing down */
 	if (!vhub->ep0_bufs)
@@ -121,10 +121,10 @@ static irqreturn_t ast_vhub_irq(int irq, void *data)
 
 	/* Handle generic EPs first */
 	if (istat & VHUB_IRQ_EP_POOL_ACK_STALL) {
-		u32 i, ep_acks = readl(vhub->regs + AST_VHUB_EP_ACK_ISR);
+		u32 ep_acks = readl(vhub->regs + AST_VHUB_EP_ACK_ISR);
 		writel(ep_acks, vhub->regs + AST_VHUB_EP_ACK_ISR);
 
-		for (i = 0; ep_acks && i < AST_VHUB_NUM_GEN_EPs; i++) {
+		for (i = 0; ep_acks && i < vhub->max_epns; i++) {
 			u32 mask = VHUB_EP_IRQ(i);
 			if (ep_acks & mask) {
 				ast_vhub_epn_ack_irq(&vhub->epns[i]);
@@ -134,21 +134,11 @@ static irqreturn_t ast_vhub_irq(int irq, void *data)
 	}
 
 	/* Handle device interrupts */
-	if (istat & (VHUB_IRQ_DEVICE1 |
+	for (i = 0; i < vhub->max_ports; i++) {
-		     VHUB_IRQ_DEVICE2 |
+		u32 dev_mask = VHUB_IRQ_DEVICE1 << i;
-		     VHUB_IRQ_DEVICE3 |
+
-		     VHUB_IRQ_DEVICE4 |
+		if (istat & dev_mask)
-		     VHUB_IRQ_DEVICE5)) {
+			ast_vhub_dev_irq(&vhub->ports[i].dev);
-		if (istat & VHUB_IRQ_DEVICE1)
-			ast_vhub_dev_irq(&vhub->ports[0].dev);
-		if (istat & VHUB_IRQ_DEVICE2)
-			ast_vhub_dev_irq(&vhub->ports[1].dev);
-		if (istat & VHUB_IRQ_DEVICE3)
-			ast_vhub_dev_irq(&vhub->ports[2].dev);
-		if (istat & VHUB_IRQ_DEVICE4)
-			ast_vhub_dev_irq(&vhub->ports[3].dev);
-		if (istat & VHUB_IRQ_DEVICE5)
-			ast_vhub_dev_irq(&vhub->ports[4].dev);
 	}
 
 	/* Handle top-level vHub EP0 interrupts */
@@ -182,7 +172,7 @@ static irqreturn_t ast_vhub_irq(int irq, void *data)
 
 void ast_vhub_init_hw(struct ast_vhub *vhub)
 {
-	u32 ctrl;
+	u32 ctrl, port_mask, epn_mask;
 
 	UDCDBG(vhub,"(Re)Starting HW ...\n");
 
@@ -222,15 +212,20 @@ void ast_vhub_init_hw(struct ast_vhub *vhub)
 	}
 
 	/* Reset all devices */
-	writel(VHUB_SW_RESET_ALL, vhub->regs + AST_VHUB_SW_RESET);
+	port_mask = GENMASK(vhub->max_ports, 1);
+	writel(VHUB_SW_RESET_ROOT_HUB |
+	       VHUB_SW_RESET_DMA_CONTROLLER |
+	       VHUB_SW_RESET_EP_POOL |
+	       port_mask, vhub->regs + AST_VHUB_SW_RESET);
 	udelay(1);
 	writel(0, vhub->regs + AST_VHUB_SW_RESET);
 
 	/* Disable and cleanup EP ACK/NACK interrupts */
+	epn_mask = GENMASK(vhub->max_epns - 1, 0);
 	writel(0, vhub->regs + AST_VHUB_EP_ACK_IER);
 	writel(0, vhub->regs + AST_VHUB_EP_NACK_IER);
-	writel(VHUB_EP_IRQ_ALL, vhub->regs + AST_VHUB_EP_ACK_ISR);
+	writel(epn_mask, vhub->regs + AST_VHUB_EP_ACK_ISR);
-	writel(VHUB_EP_IRQ_ALL, vhub->regs + AST_VHUB_EP_NACK_ISR);
+	writel(epn_mask, vhub->regs + AST_VHUB_EP_NACK_ISR);
 
 	/* Default settings for EP0, enable HW hub EP1 */
 	writel(0, vhub->regs + AST_VHUB_EP0_CTRL);
@@ -273,7 +268,7 @@ static int ast_vhub_remove(struct platform_device *pdev)
 		return 0;
 
 	/* Remove devices */
-	for (i = 0; i < AST_VHUB_NUM_PORTS; i++)
+	for (i = 0; i < vhub->max_ports; i++)
 		ast_vhub_del_dev(&vhub->ports[i].dev);
 
 	spin_lock_irqsave(&vhub->lock, flags);
@@ -295,7 +290,7 @@ static int ast_vhub_remove(struct platform_device *pdev)
 	if (vhub->ep0_bufs)
 		dma_free_coherent(&pdev->dev,
 				  AST_VHUB_EP0_MAX_PACKET *
-				  (AST_VHUB_NUM_PORTS + 1),
+				  (vhub->max_ports + 1),
 				  vhub->ep0_bufs,
 				  vhub->ep0_bufs_dma);
 	vhub->ep0_bufs = NULL;
@@ -309,11 +304,32 @@ static int ast_vhub_probe(struct platform_device *pdev)
 	struct ast_vhub *vhub;
 	struct resource *res;
 	int i, rc = 0;
+	const struct device_node *np = pdev->dev.of_node;
 
 	vhub = devm_kzalloc(&pdev->dev, sizeof(*vhub), GFP_KERNEL);
 	if (!vhub)
 		return -ENOMEM;
 
+	rc = of_property_read_u32(np, "aspeed,vhub-downstream-ports",
+				  &vhub->max_ports);
+	if (rc < 0)
+		vhub->max_ports = AST_VHUB_NUM_PORTS;
+
+	vhub->ports = devm_kcalloc(&pdev->dev, vhub->max_ports,
+				   sizeof(*vhub->ports), GFP_KERNEL);
+	if (!vhub->ports)
+		return -ENOMEM;
+
+	rc = of_property_read_u32(np, "aspeed,vhub-generic-endpoints",
+				  &vhub->max_epns);
+	if (rc < 0)
+		vhub->max_epns = AST_VHUB_NUM_GEN_EPs;
+
+	vhub->epns = devm_kcalloc(&pdev->dev, vhub->max_epns,
+				  sizeof(*vhub->epns), GFP_KERNEL);
+	if (!vhub->epns)
+		return -ENOMEM;
+
 	spin_lock_init(&vhub->lock);
 	vhub->pdev = pdev;
 
@@ -366,7 +382,7 @@ static int ast_vhub_probe(struct platform_device *pdev)
 	 */
 	vhub->ep0_bufs = dma_alloc_coherent(&pdev->dev,
 					    AST_VHUB_EP0_MAX_PACKET *
-					    (AST_VHUB_NUM_PORTS + 1),
+					    (vhub->max_ports + 1),
 					    &vhub->ep0_bufs_dma, GFP_KERNEL);
 	if (!vhub->ep0_bufs) {
 		dev_err(&pdev->dev, "Failed to allocate EP0 DMA buffers\n");
@@ -380,7 +396,7 @@ static int ast_vhub_probe(struct platform_device *pdev)
 	ast_vhub_init_ep0(vhub, &vhub->ep0, NULL);
 
 	/* Init devices */
-	for (i = 0; i < AST_VHUB_NUM_PORTS && rc == 0; i++)
+	for (i = 0; i < vhub->max_ports && rc == 0; i++)
 		rc = ast_vhub_init_dev(vhub, i);
 	if (rc)
 		goto err;
@@ -407,6 +423,9 @@ static const struct of_device_id ast_vhub_dt_ids[] = {
 	{
 		.compatible = "aspeed,ast2500-usb-vhub",
 	},
+	{
+		.compatible = "aspeed,ast2600-usb-vhub",
+	},
 	{ }
 };
 MODULE_DEVICE_TABLE(of, ast_vhub_dt_ids);

drivers/usb/gadget/udc/aspeed-vhub/dev.c

@@ -77,7 +77,7 @@ static void ast_vhub_dev_enable(struct ast_vhub_dev *d)
 	writel(d->ep0.buf_dma, d->regs + AST_VHUB_DEV_EP0_DATA);
 
 	/* Clear stall on all EPs */
-	for (i = 0; i < AST_VHUB_NUM_GEN_EPs; i++) {
+	for (i = 0; i < d->max_epns; i++) {
 		struct ast_vhub_ep *ep = d->epns[i];
 
 		if (ep && (ep->epn.stalled || ep->epn.wedged)) {
@@ -137,7 +137,7 @@ static int ast_vhub_ep_feature(struct ast_vhub_dev *d,
 	     is_set ? "SET" : "CLEAR", ep_num, wValue);
 	if (ep_num == 0)
 		return std_req_complete;
-	if (ep_num >= AST_VHUB_NUM_GEN_EPs || !d->epns[ep_num - 1])
+	if (ep_num >= d->max_epns || !d->epns[ep_num - 1])
 		return std_req_stall;
 	if (wValue != USB_ENDPOINT_HALT)
 		return std_req_driver;
@@ -181,7 +181,7 @@ static int ast_vhub_ep_status(struct ast_vhub_dev *d,
 
 	DDBG(d, "GET_STATUS(ep%d)\n", ep_num);
 
-	if (ep_num >= AST_VHUB_NUM_GEN_EPs)
+	if (ep_num >= d->max_epns)
 		return std_req_stall;
 	if (ep_num != 0) {
 		ep = d->epns[ep_num - 1];
@@ -299,7 +299,7 @@ static void ast_vhub_dev_nuke(struct ast_vhub_dev *d)
 {
 	unsigned int i;
 
-	for (i = 0; i < AST_VHUB_NUM_GEN_EPs; i++) {
+	for (i = 0; i < d->max_epns; i++) {
 		if (!d->epns[i])
 			continue;
 		ast_vhub_nuke(d->epns[i], -ESHUTDOWN);
@@ -416,10 +416,10 @@ static struct usb_ep *ast_vhub_udc_match_ep(struct usb_gadget *gadget,
 	 * that will allow the generic code to use our
 	 * assigned address.
 	 */
-	for (i = 0; i < AST_VHUB_NUM_GEN_EPs; i++)
+	for (i = 0; i < d->max_epns; i++)
 		if (d->epns[i] == NULL)
 			break;
-	if (i >= AST_VHUB_NUM_GEN_EPs)
+	if (i >= d->max_epns)
 		return NULL;
 	addr = i + 1;
 
@@ -526,6 +526,7 @@ void ast_vhub_del_dev(struct ast_vhub_dev *d)
 
 	usb_del_gadget_udc(&d->gadget);
 	device_unregister(d->port_dev);
+	kfree(d->epns);
 }
 
 static void ast_vhub_dev_release(struct device *dev)
@@ -546,14 +547,25 @@ int ast_vhub_init_dev(struct ast_vhub *vhub, unsigned int idx)
 
 	ast_vhub_init_ep0(vhub, &d->ep0, d);
 
+	/*
+	 * A USB device can have up to 30 endpoints besides control
+	 * endpoint 0.
+	 */
+	d->max_epns = min_t(u32, vhub->max_epns, 30);
+	d->epns = kcalloc(d->max_epns, sizeof(*d->epns), GFP_KERNEL);
+	if (!d->epns)
+		return -ENOMEM;
+
 	/*
 	 * The UDC core really needs us to have separate and uniquely
 	 * named "parent" devices for each port so we create a sub device
 	 * here for that purpose
 	 */
 	d->port_dev = kzalloc(sizeof(struct device), GFP_KERNEL);
-	if (!d->port_dev)
+	if (!d->port_dev) {
-		return -ENOMEM;
+		rc = -ENOMEM;
+		goto fail_alloc;
+	}
 	device_initialize(d->port_dev);
 	d->port_dev->release = ast_vhub_dev_release;
 	d->port_dev->parent = parent;
@@ -584,6 +596,8 @@ int ast_vhub_init_dev(struct ast_vhub *vhub, unsigned int idx)
 	device_del(d->port_dev);
  fail_add:
 	put_device(d->port_dev);
+ fail_alloc:
+	kfree(d->epns);
 
 	return rc;
 }

drivers/usb/gadget/udc/aspeed-vhub/epn.c

@@ -800,10 +800,10 @@ struct ast_vhub_ep *ast_vhub_alloc_epn(struct ast_vhub_dev *d, u8 addr)
 
 	/* Find a free one (no device) */
 	spin_lock_irqsave(&vhub->lock, flags);
-	for (i = 0; i < AST_VHUB_NUM_GEN_EPs; i++)
+	for (i = 0; i < vhub->max_epns; i++)
 		if (vhub->epns[i].dev == NULL)
 			break;
-	if (i >= AST_VHUB_NUM_GEN_EPs) {
+	if (i >= vhub->max_epns) {
 		spin_unlock_irqrestore(&vhub->lock, flags);
 		return NULL;
 	}

drivers/usb/gadget/udc/aspeed-vhub/hub.c

@@ -93,11 +93,7 @@ static void ast_vhub_patch_dev_desc_usb1(struct usb_device_descriptor *desc)
 				 USB_DT_INTERFACE_SIZE + \
 				 USB_DT_ENDPOINT_SIZE)
 
-static const struct ast_vhub_full_cdesc {
+static const struct ast_vhub_full_cdesc ast_vhub_conf_desc = {
-	struct usb_config_descriptor	cfg;
-	struct usb_interface_descriptor intf;
-	struct usb_endpoint_descriptor	ep;
-} __attribute__ ((packed)) ast_vhub_conf_desc = {
 	.cfg = {
 		.bLength		= USB_DT_CONFIG_SIZE,
 		.bDescriptorType	= USB_DT_CONFIG,
@@ -266,6 +262,7 @@ static int ast_vhub_rep_desc(struct ast_vhub_ep *ep,
 			     u8 desc_type, u16 len)
 {
 	size_t dsize;
+	struct ast_vhub *vhub = ep->vhub;
 
 	EPDBG(ep, "GET_DESCRIPTOR(type:%d)\n", desc_type);
 
@@ -281,20 +278,20 @@ static int ast_vhub_rep_desc(struct ast_vhub_ep *ep,
 	switch(desc_type) {
 	case USB_DT_DEVICE:
 		dsize = USB_DT_DEVICE_SIZE;
-		memcpy(ep->buf, &ast_vhub_dev_desc, dsize);
+		memcpy(ep->buf, &vhub->vhub_dev_desc, dsize);
-		BUILD_BUG_ON(dsize > sizeof(ast_vhub_dev_desc));
+		BUILD_BUG_ON(dsize > sizeof(vhub->vhub_dev_desc));
 		BUILD_BUG_ON(USB_DT_DEVICE_SIZE >= AST_VHUB_EP0_MAX_PACKET);
 		break;
 	case USB_DT_CONFIG:
 		dsize = AST_VHUB_CONF_DESC_SIZE;
-		memcpy(ep->buf, &ast_vhub_conf_desc, dsize);
+		memcpy(ep->buf, &vhub->vhub_conf_desc, dsize);
-		BUILD_BUG_ON(dsize > sizeof(ast_vhub_conf_desc));
+		BUILD_BUG_ON(dsize > sizeof(vhub->vhub_conf_desc));
 		BUILD_BUG_ON(AST_VHUB_CONF_DESC_SIZE >= AST_VHUB_EP0_MAX_PACKET);
 		break;
 	case USB_DT_HUB:
 		dsize = AST_VHUB_HUB_DESC_SIZE;
-		memcpy(ep->buf, &ast_vhub_hub_desc, dsize);
+		memcpy(ep->buf, &vhub->vhub_hub_desc, dsize);
-		BUILD_BUG_ON(dsize > sizeof(ast_vhub_hub_desc));
+		BUILD_BUG_ON(dsize > sizeof(vhub->vhub_hub_desc));
 		BUILD_BUG_ON(AST_VHUB_HUB_DESC_SIZE >= AST_VHUB_EP0_MAX_PACKET);
 		break;
 	default:
@@ -317,7 +314,8 @@ static int ast_vhub_rep_string(struct ast_vhub_ep *ep,
 			       u8 string_id, u16 lang_id,
 			       u16 len)
 {
-	int rc = usb_gadget_get_string (&ast_vhub_strings, string_id, ep->buf);
+	int rc = usb_gadget_get_string(&ep->vhub->vhub_str_desc,
+					string_id, ep->buf);
 
 	/*
 	 * This should never happen unless we put too big strings in
@@ -504,7 +502,7 @@ static void ast_vhub_wake_work(struct work_struct *work)
 	 * we let the normal host wake path deal with it later.
 	 */
 	spin_lock_irqsave(&vhub->lock, flags);
-	for (i = 0; i < AST_VHUB_NUM_PORTS; i++) {
+	for (i = 0; i < vhub->max_ports; i++) {
 		struct ast_vhub_port *p = &vhub->ports[i];
 
 		if (!(p->status & USB_PORT_STAT_SUSPEND))
@@ -587,7 +585,7 @@ static enum std_req_rc ast_vhub_set_port_feature(struct ast_vhub_ep *ep,
 	struct ast_vhub *vhub = ep->vhub;
 	struct ast_vhub_port *p;
 
-	if (port == 0 || port > AST_VHUB_NUM_PORTS)
+	if (port == 0 || port > vhub->max_ports)
 		return std_req_stall;
 	port--;
 	p = &vhub->ports[port];
@@ -630,7 +628,7 @@ static enum std_req_rc ast_vhub_clr_port_feature(struct ast_vhub_ep *ep,
 	struct ast_vhub *vhub = ep->vhub;
 	struct ast_vhub_port *p;
 
-	if (port == 0 || port > AST_VHUB_NUM_PORTS)
+	if (port == 0 || port > vhub->max_ports)
 		return std_req_stall;
 	port--;
 	p = &vhub->ports[port];
@@ -676,7 +674,7 @@ static enum std_req_rc ast_vhub_get_port_stat(struct ast_vhub_ep *ep,
 	struct ast_vhub *vhub = ep->vhub;
 	u16 stat, chg;
 
-	if (port == 0 || port > AST_VHUB_NUM_PORTS)
+	if (port == 0 || port > vhub->max_ports)
 		return std_req_stall;
 	port--;
 
@@ -757,7 +755,7 @@ void ast_vhub_hub_suspend(struct ast_vhub *vhub)
 	 * Forward to unsuspended ports without changing
 	 * their connection status.
 	 */
-	for (i = 0; i < AST_VHUB_NUM_PORTS; i++) {
+	for (i = 0; i < vhub->max_ports; i++) {
 		struct ast_vhub_port *p = &vhub->ports[i];
 
 		if (!(p->status & USB_PORT_STAT_SUSPEND))
@@ -780,7 +778,7 @@ void ast_vhub_hub_resume(struct ast_vhub *vhub)
 	 * Forward to unsuspended ports without changing
 	 * their connection status.
 	 */
-	for (i = 0; i < AST_VHUB_NUM_PORTS; i++) {
+	for (i = 0; i < vhub->max_ports; i++) {
 		struct ast_vhub_port *p = &vhub->ports[i];
 
 		if (!(p->status & USB_PORT_STAT_SUSPEND))
@@ -814,7 +812,7 @@ void ast_vhub_hub_reset(struct ast_vhub *vhub)
 	 * Clear all port status, disable gadgets and "suspend"
 	 * them. They will be woken up by a port reset.
 	 */
-	for (i = 0; i < AST_VHUB_NUM_PORTS; i++) {
+	for (i = 0; i < vhub->max_ports; i++) {
 		struct ast_vhub_port *p = &vhub->ports[i];
 
 		/* Only keep the connected flag */
@@ -834,9 +832,31 @@ void ast_vhub_hub_reset(struct ast_vhub *vhub)
 	writel(0, vhub->regs + AST_VHUB_EP1_STS_CHG);
 }
 
+static void ast_vhub_init_desc(struct ast_vhub *vhub)
+{
+	/* Initialize vhub Device Descriptor. */
+	memcpy(&vhub->vhub_dev_desc, &ast_vhub_dev_desc,
+		sizeof(vhub->vhub_dev_desc));
+
+	/* Initialize vhub Configuration Descriptor. */
+	memcpy(&vhub->vhub_conf_desc, &ast_vhub_conf_desc,
+		sizeof(vhub->vhub_conf_desc));
+
+	/* Initialize vhub Hub Descriptor. */
+	memcpy(&vhub->vhub_hub_desc, &ast_vhub_hub_desc,
+		sizeof(vhub->vhub_hub_desc));
+	vhub->vhub_hub_desc.bNbrPorts = vhub->max_ports;
+
+	/* Initialize vhub String Descriptors. */
+	memcpy(&vhub->vhub_str_desc, &ast_vhub_strings,
+		sizeof(vhub->vhub_str_desc));
+}
+
 void ast_vhub_init_hub(struct ast_vhub *vhub)
 {
 	vhub->speed = USB_SPEED_UNKNOWN;
 	INIT_WORK(&vhub->wake_work, ast_vhub_wake_work);
+
+	ast_vhub_init_desc(vhub);
 }
 

drivers/usb/gadget/udc/aspeed-vhub/vhub.h

@@ -2,6 +2,9 @@
 #ifndef __ASPEED_VHUB_H
 #define __ASPEED_VHUB_H
 
+#include <linux/usb.h>
+#include <linux/usb/ch11.h>
+
 /*****************************
  *                           *
  * VHUB register definitions *
@@ -76,17 +79,9 @@
 #define VHUB_SW_RESET_DEVICE2			(1 << 2)
 #define VHUB_SW_RESET_DEVICE1			(1 << 1)
 #define VHUB_SW_RESET_ROOT_HUB			(1 << 0)
-#define VHUB_SW_RESET_ALL			(VHUB_SW_RESET_EP_POOL | \
+
-						 VHUB_SW_RESET_DMA_CONTROLLER | \
-						 VHUB_SW_RESET_DEVICE5 | \
-						 VHUB_SW_RESET_DEVICE4 | \
-						 VHUB_SW_RESET_DEVICE3 | \
-						 VHUB_SW_RESET_DEVICE2 | \
-						 VHUB_SW_RESET_DEVICE1 | \
-						 VHUB_SW_RESET_ROOT_HUB)
 /* EP ACK/NACK IRQ masks */
 #define VHUB_EP_IRQ(n)				(1 << (n))
-#define VHUB_EP_IRQ_ALL				0x7fff	/* 15 EPs */
 
 /* USB status reg */
 #define VHUB_USBSTS_HISPEED			(1 << 27)
@@ -210,6 +205,11 @@
  *                                      *
  ****************************************/
 
+/*
+ * AST_VHUB_NUM_GEN_EPs and AST_VHUB_NUM_PORTS are kept to avoid breaking
+ * existing AST2400/AST2500 platforms. AST2600 and future vhub revisions
+ * should define number of downstream ports and endpoints in device tree.
+ */
 #define AST_VHUB_NUM_GEN_EPs	15	/* Generic non-0 EPs */
 #define AST_VHUB_NUM_PORTS	5	/* vHub ports */
 #define AST_VHUB_EP0_MAX_PACKET	64	/* EP0's max packet size */
@@ -312,7 +312,7 @@ struct ast_vhub_ep {
 			/* Registers */
 			void __iomem   		*regs;
 
-			/* Index in global pool (0..14) */
+			/* Index in global pool (zero-based) */
 			unsigned int		g_idx;
 
 			/* DMA Descriptors */
@@ -342,7 +342,7 @@ struct ast_vhub_dev {
 	struct ast_vhub			*vhub;
 	void __iomem			*regs;
 
-	/* Device index (0...4) and name string */
+	/* Device index (zero-based) and name string */
 	unsigned int			index;
 	const char			*name;
 
@@ -358,7 +358,8 @@ struct ast_vhub_dev {
 
 	/* Endpoint structures */
 	struct ast_vhub_ep		ep0;
-	struct ast_vhub_ep		*epns[AST_VHUB_NUM_GEN_EPs];
+	struct ast_vhub_ep		**epns;
+	u32				max_epns;
 
 };
 #define to_ast_dev(__g) container_of(__g, struct ast_vhub_dev, gadget)
@@ -373,6 +374,12 @@ struct ast_vhub_port {
 	struct ast_vhub_dev	dev;
 };
 
+struct ast_vhub_full_cdesc {
+	struct usb_config_descriptor	cfg;
+	struct usb_interface_descriptor intf;
+	struct usb_endpoint_descriptor	ep;
+} __packed;
+
 /* Global vhub structure */
 struct ast_vhub {
 	struct platform_device		*pdev;
@@ -393,10 +400,12 @@ struct ast_vhub {
 	bool				ep1_stalled : 1;
 
 	/* Per-port info */
-	struct ast_vhub_port		ports[AST_VHUB_NUM_PORTS];
+	struct ast_vhub_port		*ports;
+	u32				max_ports;
 
 	/* Generic EP data structures */
-	struct ast_vhub_ep		epns[AST_VHUB_NUM_GEN_EPs];
+	struct ast_vhub_ep		*epns;
+	u32				max_epns;
 
 	/* Upstream bus is suspended ? */
 	bool				suspended : 1;
@@ -409,6 +418,12 @@ struct ast_vhub {
 
 	/* Upstream bus speed captured at bus reset */
 	unsigned int			speed;
+
+	/* Standard USB Descriptors of the vhub. */
+	struct usb_device_descriptor	vhub_dev_desc;
+	struct ast_vhub_full_cdesc	vhub_conf_desc;
+	struct usb_hub_descriptor	vhub_hub_desc;
+	struct usb_gadget_strings	vhub_str_desc;
 };
 
 /* Standard request handlers result codes */

drivers/usb/gadget/udc/tegra-xudc.c

@@ -3493,11 +3493,8 @@ static int tegra_xudc_probe(struct platform_device *pdev)
 	}
 
 	xudc->irq = platform_get_irq(pdev, 0);
-	if (xudc->irq < 0) {
+	if (xudc->irq < 0)
-		dev_err(xudc->dev, "failed to get IRQ: %d\n",
-				xudc->irq);
 		return xudc->irq;
-	}
 
 	err = devm_request_irq(&pdev->dev, xudc->irq, tegra_xudc_irq, 0,
 			       dev_name(&pdev->dev), xudc);

include/uapi/linux/usb/raw_gadget.h

@@ -0,0 +1,167 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+/*
+ * USB Raw Gadget driver.
+ *
+ * See Documentation/usb/raw-gadget.rst for more details.
+ */
+
+#ifndef _UAPI__LINUX_USB_RAW_GADGET_H
+#define _UAPI__LINUX_USB_RAW_GADGET_H
+
+#include <asm/ioctl.h>
+#include <linux/types.h>
+#include <linux/usb/ch9.h>
+
+/* Maximum length of driver_name/device_name in the usb_raw_init struct. */
+#define UDC_NAME_LENGTH_MAX 128
+
+/*
+ * struct usb_raw_init - argument for USB_RAW_IOCTL_INIT ioctl.
+ * @speed: The speed of the emulated USB device, takes the same values as
+ *     the usb_device_speed enum: USB_SPEED_FULL, USB_SPEED_HIGH, etc.
+ * @driver_name: The name of the UDC driver.
+ * @device_name: The name of a UDC instance.
+ *
+ * The last two fields identify a UDC the gadget driver should bind to.
+ * For example, Dummy UDC has "dummy_udc" as its driver_name and "dummy_udc.N"
+ * as its device_name, where N in the index of the Dummy UDC instance.
+ * At the same time the dwc2 driver that is used on Raspberry Pi Zero, has
+ * "20980000.usb" as both driver_name and device_name.
+ */
+struct usb_raw_init {
+	__u8	driver_name[UDC_NAME_LENGTH_MAX];
+	__u8	device_name[UDC_NAME_LENGTH_MAX];
+	__u8	speed;
+};
+
+/* The type of event fetched with the USB_RAW_IOCTL_EVENT_FETCH ioctl. */
+enum usb_raw_event_type {
+	USB_RAW_EVENT_INVALID = 0,
+
+	/* This event is queued when the driver has bound to a UDC. */
+	USB_RAW_EVENT_CONNECT = 1,
+
+	/* This event is queued when a new control request arrived to ep0. */
+	USB_RAW_EVENT_CONTROL = 2,
+
+	/* The list might grow in the future. */
+};
+
+/*
+ * struct usb_raw_event - argument for USB_RAW_IOCTL_EVENT_FETCH ioctl.
+ * @type: The type of the fetched event.
+ * @length: Length of the data buffer. Updated by the driver and set to the
+ *     actual length of the fetched event data.
+ * @data: A buffer to store the fetched event data.
+ *
+ * Currently the fetched data buffer is empty for USB_RAW_EVENT_CONNECT,
+ * and contains struct usb_ctrlrequest for USB_RAW_EVENT_CONTROL.
+ */
+struct usb_raw_event {
+	__u32		type;
+	__u32		length;
+	__u8		data[0];
+};
+
+#define USB_RAW_IO_FLAGS_ZERO	0x0001
+#define USB_RAW_IO_FLAGS_MASK	0x0001
+
+static int usb_raw_io_flags_valid(__u16 flags)
+{
+	return (flags & ~USB_RAW_IO_FLAGS_MASK) == 0;
+}
+
+static int usb_raw_io_flags_zero(__u16 flags)
+{
+	return (flags & USB_RAW_IO_FLAGS_ZERO);
+}
+
+/*
+ * struct usb_raw_ep_io - argument for USB_RAW_IOCTL_EP0/EP_WRITE/READ ioctls.
+ * @ep: Endpoint handle as returned by USB_RAW_IOCTL_EP_ENABLE for
+ *     USB_RAW_IOCTL_EP_WRITE/READ. Ignored for USB_RAW_IOCTL_EP0_WRITE/READ.
+ * @flags: When USB_RAW_IO_FLAGS_ZERO is specified, the zero flag is set on
+ *     the submitted USB request, see include/linux/usb/gadget.h for details.
+ * @length: Length of data.
+ * @data: Data to send for USB_RAW_IOCTL_EP0/EP_WRITE. Buffer to store received
+ *     data for USB_RAW_IOCTL_EP0/EP_READ.
+ */
+struct usb_raw_ep_io {
+	__u16		ep;
+	__u16		flags;
+	__u32		length;
+	__u8		data[0];
+};
+
+/*
+ * Initializes a Raw Gadget instance.
+ * Accepts a pointer to the usb_raw_init struct as an argument.
+ * Returns 0 on success or negative error code on failure.
+ */
+#define USB_RAW_IOCTL_INIT		_IOW('U', 0, struct usb_raw_init)
+
+/*
+ * Instructs Raw Gadget to bind to a UDC and start emulating a USB device.
+ * Returns 0 on success or negative error code on failure.
+ */
+#define USB_RAW_IOCTL_RUN		_IO('U', 1)
+
+/*
+ * A blocking ioctl that waits for an event and returns fetched event data to
+ * the user.
+ * Accepts a pointer to the usb_raw_event struct.
+ * Returns 0 on success or negative error code on failure.
+ */
+#define USB_RAW_IOCTL_EVENT_FETCH	_IOR('U', 2, struct usb_raw_event)
+
+/*
+ * Queues an IN (OUT for READ) urb as a response to the last control request
+ * received on endpoint 0, provided that was an IN (OUT for READ) request and
+ * waits until the urb is completed. Copies received data to user for READ.
+ * Accepts a pointer to the usb_raw_ep_io struct as an argument.
+ * Returns length of trasferred data on success or negative error code on
+ * failure.
+ */
+#define USB_RAW_IOCTL_EP0_WRITE		_IOW('U', 3, struct usb_raw_ep_io)
+#define USB_RAW_IOCTL_EP0_READ		_IOWR('U', 4, struct usb_raw_ep_io)
+
+/*
+ * Finds an endpoint that supports the transfer type specified in the
+ * descriptor and enables it.
+ * Accepts a pointer to the usb_endpoint_descriptor struct as an argument.
+ * Returns enabled endpoint handle on success or negative error code on failure.
+ */
+#define USB_RAW_IOCTL_EP_ENABLE		_IOW('U', 5, struct usb_endpoint_descriptor)
+
+/* Disables specified endpoint.
+ * Accepts endpoint handle as an argument.
+ * Returns 0 on success or negative error code on failure.
+ */
+#define USB_RAW_IOCTL_EP_DISABLE	_IOW('U', 6, __u32)
+
+/*
+ * Queues an IN (OUT for READ) urb as a response to the last control request
+ * received on endpoint usb_raw_ep_io.ep, provided that was an IN (OUT for READ)
+ * request and waits until the urb is completed. Copies received data to user
+ * for READ.
+ * Accepts a pointer to the usb_raw_ep_io struct as an argument.
+ * Returns length of trasferred data on success or negative error code on
+ * failure.
+ */
+#define USB_RAW_IOCTL_EP_WRITE		_IOW('U', 7, struct usb_raw_ep_io)
+#define USB_RAW_IOCTL_EP_READ		_IOWR('U', 8, struct usb_raw_ep_io)
+
+/*
+ * Switches the gadget into the configured state.
+ * Returns 0 on success or negative error code on failure.
+ */
+#define USB_RAW_IOCTL_CONFIGURE		_IO('U', 9)
+
+/*
+ * Constrains UDC VBUS power usage.
+ * Accepts current limit in 2 mA units as an argument.
+ * Returns 0 on success or negative error code on failure.
+ */
+#define USB_RAW_IOCTL_VBUS_DRAW		_IOW('U', 10, __u32)
+
+#endif /* _UAPI__LINUX_USB_RAW_GADGET_H */