dt-bindings: pinctrl: qcom: Add QCS404 pinctrl binding
Add the binding for the TLMM pinctrl block found in the QCS404 platform. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This commit is contained in:
Bjorn Andersson
Linus Walleij
parent
a46d5e9819
commit
9d8ea6beac
@ -0,0 +1,199 @@
|
||||
Qualcomm QCS404 TLMM block
|
||||
|
||||
This binding describes the Top Level Mode Multiplexer block found in the
|
||||
QCS404 platform.
|
||||
|
||||
- compatible:
|
||||
Usage: required
|
||||
Value type: <string>
|
||||
Definition: must be "qcom,qcs404-pinctrl"
|
||||
|
||||
- reg:
|
||||
Usage: required
|
||||
Value type: <prop-encoded-array>
|
||||
Definition: the base address and size of the north, south and east TLMM
|
||||
tiles.
|
||||
|
||||
- reg-names:
|
||||
Usage: required
|
||||
Value type: <stringlist>
|
||||
Defintiion: names for the cells of reg, must contain "north", "south"
|
||||
and "east".
|
||||
|
||||
- interrupts:
|
||||
Usage: required
|
||||
Value type: <prop-encoded-array>
|
||||
Definition: should specify the TLMM summary IRQ.
|
||||
|
||||
- interrupt-controller:
|
||||
Usage: required
|
||||
Value type: <none>
|
||||
Definition: identifies this node as an interrupt controller
|
||||
|
||||
- #interrupt-cells:
|
||||
Usage: required
|
||||
Value type: <u32>
|
||||
Definition: must be 2. Specifying the pin number and flags, as defined
|
||||
in <dt-bindings/interrupt-controller/irq.h>
|
||||
|
||||
- gpio-controller:
|
||||
Usage: required
|
||||
Value type: <none>
|
||||
Definition: identifies this node as a gpio controller
|
||||
|
||||
- #gpio-cells:
|
||||
Usage: required
|
||||
Value type: <u32>
|
||||
Definition: must be 2. Specifying the pin number and flags, as defined
|
||||
in <dt-bindings/gpio/gpio.h>
|
||||
|
||||
- gpio-ranges:
|
||||
Usage: required
|
||||
Definition: see ../gpio/gpio.txt
|
||||
|
||||
Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for
|
||||
a general description of GPIO and interrupt bindings.
|
||||
|
||||
Please refer to pinctrl-bindings.txt in this directory for details of the
|
||||
common pinctrl bindings used by client devices, including the meaning of the
|
||||
phrase "pin configuration node".
|
||||
|
||||
The pin configuration nodes act as a container for an arbitrary number of
|
||||
subnodes. Each of these subnodes represents some desired configuration for a
|
||||
pin, a group, or a list of pins or groups. This configuration can include the
|
||||
mux function to select on those pin(s)/group(s), and various pin configuration
|
||||
parameters, such as pull-up, drive strength, etc.
|
||||
|
||||
|
||||
PIN CONFIGURATION NODES:
|
||||
|
||||
The name of each subnode is not important; all subnodes should be enumerated
|
||||
and processed purely based on their content.
|
||||
|
||||
Each subnode only affects those parameters that are explicitly listed. In
|
||||
other words, a subnode that lists a mux function but no pin configuration
|
||||
parameters implies no information about any pin configuration parameters.
|
||||
Similarly, a pin subnode that describes a pullup parameter implies no
|
||||
information about e.g. the mux function.
|
||||
|
||||
|
||||
The following generic properties as defined in pinctrl-bindings.txt are valid
|
||||
to specify in a pin configuration subnode:
|
||||
|
||||
- pins:
|
||||
Usage: required
|
||||
Value type: <string-array>
|
||||
Definition: List of gpio pins affected by the properties specified in
|
||||
this subnode.
|
||||
|
||||
Valid pins are:
|
||||
gpio0-gpio119
|
||||
Supports mux, bias and drive-strength
|
||||
|
||||
sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk, sdc2_cmd,
|
||||
sdc2_data
|
||||
Supports bias and drive-strength
|
||||
|
||||
ufs_reset
|
||||
Supports bias and drive-strength
|
||||
|
||||
- function:
|
||||
Usage: required
|
||||
Value type: <string>
|
||||
Definition: Specify the alternative function to be configured for the
|
||||
specified pins. Functions are only valid for gpio pins.
|
||||
Valid values are:
|
||||
|
||||
gpio, hdmi_tx, hdmi_ddc, blsp_uart_tx_a2, blsp_spi2, m_voc,
|
||||
qdss_cti_trig_in_a0, blsp_uart_rx_a2, qdss_tracectl_a,
|
||||
blsp_uart2, aud_cdc, blsp_i2c_sda_a2, qdss_tracedata_a,
|
||||
blsp_i2c_scl_a2, qdss_tracectl_b, qdss_cti_trig_in_b0,
|
||||
blsp_uart1, blsp_spi_mosi_a1, blsp_spi_miso_a1,
|
||||
qdss_tracedata_b, blsp_i2c1, blsp_spi_cs_n_a1, gcc_plltest,
|
||||
blsp_spi_clk_a1, rgb_data0, blsp_uart5, blsp_spi5,
|
||||
adsp_ext, rgb_data1, prng_rosc, rgb_data2, blsp_i2c5,
|
||||
gcc_gp1_clk_b, rgb_data3, gcc_gp2_clk_b, blsp_spi0,
|
||||
blsp_uart0, gcc_gp3_clk_b, blsp_i2c0, qdss_traceclk_b,
|
||||
pcie_clk, nfc_irq, blsp_spi4, nfc_dwl, audio_ts, rgb_data4,
|
||||
spi_lcd, blsp_uart_tx_b2, gcc_gp3_clk_a, rgb_data5,
|
||||
blsp_uart_rx_b2, blsp_i2c_sda_b2, blsp_i2c_scl_b2,
|
||||
pwm_led11, i2s_3_data0_a, ebi2_lcd, i2s_3_data1_a,
|
||||
i2s_3_data2_a, atest_char, pwm_led3, i2s_3_data3_a,
|
||||
pwm_led4, i2s_4, ebi2_a, dsd_clk_b, pwm_led5, pwm_led6,
|
||||
pwm_led7, pwm_led8, pwm_led24, spkr_dac0, blsp_i2c4,
|
||||
pwm_led9, pwm_led10, spdifrx_opt, pwm_led12, pwm_led13,
|
||||
pwm_led14, wlan1_adc1, rgb_data_b0, pwm_led15,
|
||||
blsp_spi_mosi_b1, wlan1_adc0, rgb_data_b1, pwm_led16,
|
||||
blsp_spi_miso_b1, qdss_cti_trig_out_b0, wlan2_adc1,
|
||||
rgb_data_b2, pwm_led17, blsp_spi_cs_n_b1, wlan2_adc0,
|
||||
rgb_data_b3, pwm_led18, blsp_spi_clk_b1, rgb_data_b4,
|
||||
pwm_led19, ext_mclk1_b, qdss_traceclk_a, rgb_data_b5,
|
||||
pwm_led20, atest_char3, i2s_3_sck_b, ldo_update, bimc_dte0,
|
||||
rgb_hsync, pwm_led21, i2s_3_ws_b, dbg_out, rgb_vsync,
|
||||
i2s_3_data0_b, ldo_en, hdmi_dtest, rgb_de, i2s_3_data1_b,
|
||||
hdmi_lbk9, rgb_clk, atest_char1, i2s_3_data2_b, ebi_cdc,
|
||||
hdmi_lbk8, rgb_mdp, atest_char0, i2s_3_data3_b, hdmi_lbk7,
|
||||
rgb_data_b6, rgb_data_b7, hdmi_lbk6, rgmii_int, cri_trng1,
|
||||
rgmii_wol, cri_trng0, gcc_tlmm, rgmii_ck, rgmii_tx,
|
||||
hdmi_lbk5, hdmi_pixel, hdmi_rcv, hdmi_lbk4, rgmii_ctl,
|
||||
ext_lpass, rgmii_rx, cri_trng, hdmi_lbk3, hdmi_lbk2,
|
||||
qdss_cti_trig_out_b1, rgmii_mdio, hdmi_lbk1, rgmii_mdc,
|
||||
hdmi_lbk0, ir_in, wsa_en, rgb_data6, rgb_data7,
|
||||
atest_char2, ebi_ch0, blsp_uart3, blsp_spi3, sd_write,
|
||||
blsp_i2c3, gcc_gp1_clk_a, qdss_cti_trig_in_b1,
|
||||
gcc_gp2_clk_a, ext_mclk0, mclk_in1, i2s_1, dsd_clk_a,
|
||||
qdss_cti_trig_in_a1, rgmi_dll1, pwm_led22, pwm_led23,
|
||||
qdss_cti_trig_out_a0, rgmi_dll2, pwm_led1,
|
||||
qdss_cti_trig_out_a1, pwm_led2, i2s_2, pll_bist,
|
||||
ext_mclk1_a, mclk_in2, bimc_dte1, i2s_3_sck_a, i2s_3_ws_a
|
||||
|
||||
- bias-disable:
|
||||
Usage: optional
|
||||
Value type: <none>
|
||||
Definition: The specified pins should be configued as no pull.
|
||||
|
||||
- bias-pull-down:
|
||||
Usage: optional
|
||||
Value type: <none>
|
||||
Definition: The specified pins should be configued as pull down.
|
||||
|
||||
- bias-pull-up:
|
||||
Usage: optional
|
||||
Value type: <none>
|
||||
Definition: The specified pins should be configued as pull up.
|
||||
|
||||
- output-high:
|
||||
Usage: optional
|
||||
Value type: <none>
|
||||
Definition: The specified pins are configured in output mode, driven
|
||||
high.
|
||||
Not valid for sdc pins.
|
||||
|
||||
- output-low:
|
||||
Usage: optional
|
||||
Value type: <none>
|
||||
Definition: The specified pins are configured in output mode, driven
|
||||
low.
|
||||
Not valid for sdc pins.
|
||||
|
||||
- drive-strength:
|
||||
Usage: optional
|
||||
Value type: <u32>
|
||||
Definition: Selects the drive strength for the specified pins, in mA.
|
||||
Valid values are: 2, 4, 6, 8, 10, 12, 14 and 16
|
||||
|
||||
Example:
|
||||
|
||||
tlmm: pinctrl@1000000 {
|
||||
compatible = "qcom,qcs404-pinctrl";
|
||||
reg = <0x01000000 0x200000>,
|
||||
<0x01300000 0x200000>,
|
||||
<0x07b00000 0x200000>;
|
||||
reg-names = "south", "north", "east";
|
||||
interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
gpio-ranges = <&tlmm 0 0 120>;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
};
|
||||
Loading…
Reference in New Issue
Block a user