riscv: Add SiPeed MAIXDUINO board device tree
Add the device tree sipeed_maixduino.dts for the SiPeed MAIXDUINO board. This device tree enables LEDs and spi/mmc SD card device. Additionally, gpios and i2c are also enabled and mapped to the board header pins as indicated on the board itself. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> [Palmer: Remove undocumented microphone entry, along with the use.] Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
This commit is contained in:
Damien Le Moal
Palmer Dabbelt
parent
8194f08bda
commit
8f5b0e79f3
184
arch/riscv/boot/dts/canaan/sipeed_maixduino.dts
Normal file
184
arch/riscv/boot/dts/canaan/sipeed_maixduino.dts
Normal file
@ -0,0 +1,184 @@
|
||||
// SPDX-License-Identifier: GPL-2.0+
|
||||
/*
|
||||
* Copyright (C) 2019-20 Sean Anderson <seanga2@gmail.com>
|
||||
* Copyright (C) 2020 Western Digital Corporation or its affiliates.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "k210.dtsi"
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
|
||||
/ {
|
||||
model = "SiPeed MAIXDUINO";
|
||||
compatible = "sipeed,maixduino", "canaan,kendryte-k210";
|
||||
|
||||
chosen {
|
||||
bootargs = "earlycon console=ttySIF0";
|
||||
stdout-path = "serial0:115200n8";
|
||||
};
|
||||
|
||||
gpio-keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
boot {
|
||||
label = "BOOT";
|
||||
linux,code = <BTN_0>;
|
||||
gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_3v3: regulator-3v3 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "3v3";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
};
|
||||
|
||||
&fpioa {
|
||||
status = "okay";
|
||||
|
||||
uarths_pinctrl: uarths-pinmux {
|
||||
pinmux = <K210_FPIOA(4, K210_PCF_UARTHS_RX)>, /* Header "0" */
|
||||
<K210_FPIOA(5, K210_PCF_UARTHS_TX)>; /* Header "1" */
|
||||
};
|
||||
|
||||
gpio_pinctrl: gpio-pinmux {
|
||||
pinmux = <K210_FPIOA(8, K210_PCF_GPIO0)>,
|
||||
<K210_FPIOA(9, K210_PCF_GPIO1)>;
|
||||
};
|
||||
|
||||
gpiohs_pinctrl: gpiohs-pinmux {
|
||||
pinmux = <K210_FPIOA(16, K210_PCF_GPIOHS0)>, /* BOOT */
|
||||
<K210_FPIOA(21, K210_PCF_GPIOHS2)>, /* Header "2" */
|
||||
<K210_FPIOA(22, K210_PCF_GPIOHS3)>, /* Header "3" */
|
||||
<K210_FPIOA(23, K210_PCF_GPIOHS4)>, /* Header "4" */
|
||||
<K210_FPIOA(24, K210_PCF_GPIOHS5)>, /* Header "5" */
|
||||
<K210_FPIOA(32, K210_PCF_GPIOHS6)>, /* Header "6" */
|
||||
<K210_FPIOA(15, K210_PCF_GPIOHS7)>, /* Header "7" */
|
||||
<K210_FPIOA(14, K210_PCF_GPIOHS8)>, /* Header "8" */
|
||||
<K210_FPIOA(13, K210_PCF_GPIOHS9)>, /* Header "9" */
|
||||
<K210_FPIOA(12, K210_PCF_GPIOHS10)>, /* Header "10" */
|
||||
<K210_FPIOA(11, K210_PCF_GPIOHS11)>, /* Header "11" */
|
||||
<K210_FPIOA(10, K210_PCF_GPIOHS12)>, /* Header "12" */
|
||||
<K210_FPIOA(3, K210_PCF_GPIOHS13)>; /* Header "13" */
|
||||
};
|
||||
|
||||
i2s0_pinctrl: i2s0-pinmux {
|
||||
pinmux = <K210_FPIOA(18, K210_PCF_I2S0_SCLK)>,
|
||||
<K210_FPIOA(19, K210_PCF_I2S0_WS)>,
|
||||
<K210_FPIOA(20, K210_PCF_I2S0_IN_D0)>;
|
||||
};
|
||||
|
||||
spi1_pinctrl: spi1-pinmux {
|
||||
pinmux = <K210_FPIOA(26, K210_PCF_SPI1_D1)>,
|
||||
<K210_FPIOA(27, K210_PCF_SPI1_SCLK)>,
|
||||
<K210_FPIOA(28, K210_PCF_SPI1_D0)>,
|
||||
<K210_FPIOA(29, K210_PCF_GPIO2)>; /* cs */
|
||||
};
|
||||
|
||||
i2c1_pinctrl: i2c1-pinmux {
|
||||
pinmux = <K210_FPIOA(30, K210_PCF_I2C1_SCLK)>, /* Header "scl" */
|
||||
<K210_FPIOA(31, K210_PCF_I2C1_SDA)>; /* Header "sda" */
|
||||
};
|
||||
|
||||
i2s1_pinctrl: i2s1-pinmux {
|
||||
pinmux = <K210_FPIOA(33, K210_PCF_I2S1_WS)>,
|
||||
<K210_FPIOA(34, K210_PCF_I2S1_IN_D0)>,
|
||||
<K210_FPIOA(35, K210_PCF_I2S1_SCLK)>;
|
||||
};
|
||||
|
||||
spi0_pinctrl: spi0-pinmux {
|
||||
pinmux = <K210_FPIOA(36, K210_PCF_GPIOHS20)>, /* cs */
|
||||
<K210_FPIOA(37, K210_PCF_GPIOHS21)>, /* rst */
|
||||
<K210_FPIOA(38, K210_PCF_GPIOHS22)>, /* dc */
|
||||
<K210_FPIOA(39, K210_PCF_SPI0_SCLK)>; /* wr */
|
||||
};
|
||||
|
||||
dvp_pinctrl: dvp-pinmux {
|
||||
pinmux = <K210_FPIOA(40, K210_PCF_SCCB_SDA)>,
|
||||
<K210_FPIOA(41, K210_PCF_SCCB_SCLK)>,
|
||||
<K210_FPIOA(42, K210_PCF_DVP_RST)>,
|
||||
<K210_FPIOA(43, K210_PCF_DVP_VSYNC)>,
|
||||
<K210_FPIOA(44, K210_PCF_DVP_PWDN)>,
|
||||
<K210_FPIOA(45, K210_PCF_DVP_HSYNC)>,
|
||||
<K210_FPIOA(46, K210_PCF_DVP_XCLK)>,
|
||||
<K210_FPIOA(47, K210_PCF_DVP_PCLK)>;
|
||||
};
|
||||
};
|
||||
|
||||
&uarths0 {
|
||||
pinctrl-0 = <&uarths_pinctrl>;
|
||||
pinctrl-names = "default";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gpio0 {
|
||||
pinctrl-0 = <&gpiohs_pinctrl>;
|
||||
pinctrl-names = "default";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gpio1 {
|
||||
pinctrl-0 = <&gpio_pinctrl>;
|
||||
pinctrl-names = "default";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2s0 {
|
||||
#sound-dai-cells = <1>;
|
||||
pinctrl-0 = <&i2s0_pinctrl>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
&i2c1 {
|
||||
pinctrl-0 = <&i2c1_pinctrl>;
|
||||
pinctrl-names = "default";
|
||||
clock-frequency = <400000>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&spi0 {
|
||||
pinctrl-0 = <&spi0_pinctrl>;
|
||||
pinctrl-names = "default";
|
||||
num-cs = <1>;
|
||||
cs-gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>;
|
||||
|
||||
panel@0 {
|
||||
compatible = "sitronix,st7789v";
|
||||
reg = <0>;
|
||||
reset-gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
|
||||
dc-gpios = <&gpio0 22 0>;
|
||||
spi-max-frequency = <15000000>;
|
||||
power-supply = <&vcc_3v3>;
|
||||
};
|
||||
};
|
||||
|
||||
&spi1 {
|
||||
pinctrl-0 = <&spi1_pinctrl>;
|
||||
pinctrl-names = "default";
|
||||
num-cs = <1>;
|
||||
cs-gpios = <&gpio1_0 2 GPIO_ACTIVE_LOW>;
|
||||
status = "okay";
|
||||
|
||||
slot@0 {
|
||||
compatible = "mmc-spi-slot";
|
||||
reg = <0>;
|
||||
voltage-ranges = <3300 3300>;
|
||||
spi-max-frequency = <25000000>;
|
||||
broken-cd;
|
||||
};
|
||||
};
|
||||
|
||||
&spi3 {
|
||||
spi-flash@0 {
|
||||
compatible = "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <50000000>;
|
||||
m25p,fast-read;
|
||||
broken-flash-reset;
|
||||
};
|
||||
};
|
||||
Loading…
Reference in New Issue
Block a user