btmrvl.txt: standardize document format

Each text file under Documentation follows a different
format. Some doesn't even have titles!

Change its representation to follow the adopted standard,
using ReST markups for it to be parseable by Sphinx:

- Use the right notation for titles;
- Use a list for image names;
- Use literal blocks where needed;
- Whitespace fixes.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
This commit is contained in:
Mauro Carvalho Chehab 2017-05-14 08:03:53 -03:00 committed by Jonathan Corbet
parent b4b8af5c4e
commit 7f4e012133

View File

@ -1,18 +1,16 @@
=======================================================================
README for btmrvl driver
=======================================================================
=============
btmrvl driver
=============
All commands are used via debugfs interface.
=====================
Set/get driver configurations:
Set/get driver configurations
=============================
Path: /debug/btmrvl/config/
gpiogap=[n]
hscfgcmd
These commands are used to configure the host sleep parameters.
gpiogap=[n], hscfgcmd
These commands are used to configure the host sleep parameters::
bit 8:0 -- Gap
bit 16:8 -- GPIO
@ -23,7 +21,8 @@ hscfgcmd
where Gap is the gap in milli seconds between wakeup signal and
wakeup event, or 0xff for special host sleep setting.
Usage:
Usage::
# Use SDIO interface to wake up the host and set GAP to 0x80:
echo 0xff80 > /debug/btmrvl/config/gpiogap
echo 1 > /debug/btmrvl/config/hscfgcmd
@ -32,15 +31,16 @@ hscfgcmd
echo 0x03ff > /debug/btmrvl/config/gpiogap
echo 1 > /debug/btmrvl/config/hscfgcmd
psmode=[n]
pscmd
psmode=[n], pscmd
These commands are used to enable/disable auto sleep mode
where the option is:
where the option is::
1 -- Enable auto sleep mode
0 -- Disable auto sleep mode
Usage:
Usage::
# Enable auto sleep mode
echo 1 > /debug/btmrvl/config/psmode
echo 1 > /debug/btmrvl/config/pscmd
@ -50,15 +50,16 @@ pscmd
echo 1 > /debug/btmrvl/config/pscmd
hsmode=[n]
hscmd
hsmode=[n], hscmd
These commands are used to enable host sleep or wake up firmware
where the option is:
where the option is::
1 -- Enable host sleep
0 -- Wake up firmware
Usage:
Usage::
# Enable host sleep
echo 1 > /debug/btmrvl/config/hsmode
echo 1 > /debug/btmrvl/config/hscmd
@ -68,12 +69,13 @@ hscmd
echo 1 > /debug/btmrvl/config/hscmd
======================
Get driver status:
Get driver status
=================
Path: /debug/btmrvl/status/
Usage:
Usage::
cat /debug/btmrvl/status/<args>
where the args are:
@ -90,14 +92,17 @@ hsstate
txdnldrdy
This command displays the value of Tx download ready flag.
=====================
Issuing a raw hci command
=========================
Use hcitool to issue raw hci command, refer to hcitool manual
Usage: Hcitool cmd <ogf> <ocf> [Parameters]
Usage::
Hcitool cmd <ogf> <ocf> [Parameters]
Interface Control Command::
Interface Control Command
hcitool cmd 0x3f 0x5b 0xf5 0x01 0x00 --Enable All interface
hcitool cmd 0x3f 0x5b 0xf5 0x01 0x01 --Enable Wlan interface
hcitool cmd 0x3f 0x5b 0xf5 0x01 0x02 --Enable BT interface
@ -105,13 +110,13 @@ Use hcitool to issue raw hci command, refer to hcitool manual
hcitool cmd 0x3f 0x5b 0xf5 0x00 0x01 --Disable Wlan interface
hcitool cmd 0x3f 0x5b 0xf5 0x00 0x02 --Disable BT interface
=======================================================================
SD8688 firmware
===============
Images:
SD8688 firmware:
/lib/firmware/sd8688_helper.bin
/lib/firmware/sd8688.bin
- /lib/firmware/sd8688_helper.bin
- /lib/firmware/sd8688.bin
The images can be downloaded from: