davidlt/kernel-ark
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

dt-bindings: pinctrl: Group tuples in pin control properties

Browse Source 
To improve human readability and enable automatic validation, the tuples
in "pinctrl-*" properties should be grouped using angle brackets.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210204125718.1646082-1-geert+renesas@glider.be
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This commit is contained in:
Geert Uytterhoeven 2021-02-04 13:57:18 +01:00 committed by Linus Walleij
parent 5637f556a2
commit 74f2dd4479
8 changed files with 13 additions and 13 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
Documentation/devicetree/bindings/pinctrl/brcm,ns2-pinmux.txt
View File

@ -39,7 +39,7 @@ For example:
<0x660009b0 0x40>;
pinctrl-names = "default";
pinctrl-0 = <&nand_sel &uart3_rx &sdio0_d4>;
pinctrl-0 = <&nand_sel>, <&uart3_rx>, <&sdio0_d4>;
/* Select nand function */
nand_sel: nand_sel {

2
Documentation/devicetree/bindings/pinctrl/brcm,nsp-pinmux.txt
View File

@ -30,7 +30,7 @@ For example:
<0x1803f408 0x04>;
pinctrl-names = "default";
pinctrl-0 = <&pwm &gpio_b &nand_sel>;
pinctrl-0 = <&pwm>, <&gpio_b>, <&nand_sel>;
pwm: pwm {
function = "pwm";

2
Documentation/devicetree/bindings/pinctrl/fsl,imx7d-pinctrl.txt
View File

@ -60,7 +60,7 @@ iomuxc-lpsr controller and SDA pad from iomuxc controller as:
i2c1: i2c@30a20000 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1_1 &pinctrl_i2c1_2>;
pinctrl-0 = <&pinctrl_i2c1_1>, <&pinctrl_i2c1_2>;
};
iomuxc-lpsr@302c0000 {

4
Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
View File

@ -77,13 +77,13 @@ For example:
device {
pinctrl-names = "active", "idle";
pinctrl-0 = <&state_0_node_a>;
pinctrl-1 = <&state_1_node_a &state_1_node_b>;
pinctrl-1 = <&state_1_node_a>, <&state_1_node_b>;
};
/* For the same device if using state IDs */
device {
pinctrl-0 = <&state_0_node_a>;
pinctrl-1 = <&state_1_node_a &state_1_node_b>;
pinctrl-1 = <&state_1_node_a>, <&state_1_node_b>;
};
/*

2
Documentation/devicetree/bindings/pinctrl/pinctrl-mcp23s08.txt
View File

@ -134,7 +134,7 @@ gpio21: gpio@21 {
#interrupt-cells = <0x2>;
microchip,irq-mirror;
pinctrl-names = "default";
pinctrl-0 = <&i2cgpio0irq &gpio21pullups>;
pinctrl-0 = <&i2cgpio0irq>, <&gpio21pullups>;
gpio21pullups: pinmux {
pins = "gpio0", "gpio1", "gpio2", "gpio3",

2
Documentation/devicetree/bindings/pinctrl/pinctrl-mt65xx.txt
View File

@ -91,7 +91,7 @@ Examples:
pinctrl@1c20800 {
compatible = "mediatek,mt8135-pinctrl";
reg = <0 0x1000B000 0 0x1000>;
mediatek,pctl-regmap = <&syscfg_pctl_a &syscfg_pctl_b>;
mediatek,pctl-regmap = <&syscfg_pctl_a>, <&syscfg_pctl_b>;
pins-are-numbered;
gpio-controller;
#gpio-cells = <2>;

10
Documentation/devicetree/bindings/pinctrl/pinctrl-single.txt
View File

@ -80,7 +80,7 @@ Optional properties:
property.
/* pin base, nr pins & gpio function */
pinctrl-single,gpio-range = <&range 0 3 0 &range 3 9 1>;
pinctrl-single,gpio-range = <&range 0 3 0>, <&range 3 9 1>;
- interrupt-controller : standard interrupt controller binding if using
interrupts for wake-up events for example. In this case pinctrl-single
@ -185,10 +185,10 @@ pmx_gpio: pinmux@d401e000 {
pinctrl-single,function-mask = <7>;
/* sparse GPIO range could be supported */
pinctrl-single,gpio-range = <&range 0 3 0 &range 3 9 1
&range 12 1 0 &range 13 29 1
&range 43 1 0 &range 44 49 1
&range 94 1 1 &range 96 2 1>;
pinctrl-single,gpio-range = <&range 0 3 0>, <&range 3 9 1>,
<&range 12 1 0>, <&range 13 29 1>,
<&range 43 1 0>, <&range 44 49 1>,
<&range 94 1 1>, <&range 96 2 1>;
range: gpio-range {
#pinctrl-single,gpio-range-cells = <3>;

2
Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt
View File

@ -336,7 +336,7 @@ Example 3: A uart client node that supports 'default' and 'flow-control' states.
interrupts = <0 52 0>;
pinctrl-names = "default", "flow-control;
pinctrl-0 = <&uart0_data>;
pinctrl-1 = <&uart0_data &uart0_fctl>;
pinctrl-1 = <&uart0_data>, <&uart0_fctl>;
};
Example 4: Set up the default pin state for uart controller.