From 6d796c68cd15234a33a4bd2ef7231125fea2dc6c Mon Sep 17 00:00:00 2001 From: Shawn Lin Date: Tue, 8 May 2018 09:04:20 +0800 Subject: [PATCH] mmc: core: add tunable delay waiting for power to be stable The hard-coded 10ms delay in mmc_power_up came from commit 79bccc5aefb4 ("mmc: increase power up delay"), which said "The TI controller on Toshiba Tecra M5 needs more time to power up or the cards will init incorrectly or not at all." But it's too engineering solution for a special board but force all platforms to wait for that long time, especially painful for mmc_power_up for eMMC when booting. However, it's added since 2009, and we can't tell if other platforms benefit from it. But in practise, the modern hardware are most likely to have a stable power supply with 1ms after setting it for no matter PMIC or discrete power. And more importnatly, most regulators implement the callback of ->set_voltage_time_sel() for regulator core to wait for specific period of time for the power supply to be stable, which means once regulator_set_voltage_* return, the power should reach the the minimum voltage that works for initialization. Of course, if there are some other ways for host to power the card, we should allow them to argue a suitable delay as well. With this patch, we could assign the delay from firmware, or we could assigne it via ->set_ios() callback from host drivers. Signed-off-by: Shawn Lin Signed-off-by: Ulf Hansson --- drivers/mmc/core/core.c | 4 ++-- drivers/mmc/core/host.c | 4 ++++ include/linux/mmc/host.h | 1 + 3 files changed, 7 insertions(+), 2 deletions(-) diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c index 42cfcb64abe0..9a769edbabe0 100644 --- a/drivers/mmc/core/core.c +++ b/drivers/mmc/core/core.c @@ -1660,7 +1660,7 @@ void mmc_power_up(struct mmc_host *host, u32 ocr) * This delay should be sufficient to allow the power supply * to reach the minimum voltage. */ - mmc_delay(10); + mmc_delay(host->ios.power_delay_ms); mmc_pwrseq_post_power_on(host); @@ -1673,7 +1673,7 @@ void mmc_power_up(struct mmc_host *host, u32 ocr) * This delay must be at least 74 clock sizes, or 1 ms, or the * time required to reach a stable voltage. */ - mmc_delay(10); + mmc_delay(host->ios.power_delay_ms); } void mmc_power_off(struct mmc_host *host) diff --git a/drivers/mmc/core/host.c b/drivers/mmc/core/host.c index da08a17fbf6c..c57ffff18e37 100644 --- a/drivers/mmc/core/host.c +++ b/drivers/mmc/core/host.c @@ -343,6 +343,9 @@ int mmc_of_parse(struct mmc_host *host) host->dsr_req = 0; } + device_property_read_u32(dev, "post-power-on-delay-ms", + &host->ios.power_delay_ms); + return mmc_pwrseq_alloc(host); } @@ -408,6 +411,7 @@ struct mmc_host *mmc_alloc_host(int extra, struct device *dev) host->max_blk_count = PAGE_SIZE / 512; host->fixed_drv_type = -EINVAL; + host->ios.power_delay_ms = 10; return host; } diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h index 8f1859044db1..64300a48dcce 100644 --- a/include/linux/mmc/host.h +++ b/include/linux/mmc/host.h @@ -22,6 +22,7 @@ struct mmc_ios { unsigned int clock; /* clock rate */ unsigned short vdd; + unsigned int power_delay_ms; /* waiting for stable power */ /* vdd stores the bit number of the selected voltage range from below. */