Merge branch 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux

Pull i2c fixes from Wolfram Sang:

 - I2C core bugfix regarding bus recovery

 - driver bugfix for the tegra driver

 - typo correction

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: recovery: if possible send STOP with recovery pulses
  i2c: tegra: Fix NACK error handling
  i2c: stu300: use non-archaic spelling of failes
This commit is contained in:
Linus Torvalds 2018-07-13 15:34:29 -07:00
commit 2db39a2f49
3 changed files with 19 additions and 11 deletions

View File

@ -127,7 +127,7 @@ enum stu300_error {
/*
* The number of address send athemps tried before giving up.
* If the first one failes it seems like 5 to 8 attempts are required.
* If the first one fails it seems like 5 to 8 attempts are required.
*/
#define NUM_ADDR_RESEND_ATTEMPTS 12

View File

@ -545,6 +545,14 @@ static int tegra_i2c_disable_packet_mode(struct tegra_i2c_dev *i2c_dev)
{
u32 cnfg;
/*
* NACK interrupt is generated before the I2C controller generates
* the STOP condition on the bus. So wait for 2 clock periods
* before disabling the controller so that the STOP condition has
* been delivered properly.
*/
udelay(DIV_ROUND_UP(2 * 1000000, i2c_dev->bus_clk_rate));
cnfg = i2c_readl(i2c_dev, I2C_CNFG);
if (cnfg & I2C_CNFG_PACKET_MODE_EN)
i2c_writel(i2c_dev, cnfg & ~I2C_CNFG_PACKET_MODE_EN, I2C_CNFG);
@ -706,15 +714,6 @@ static int tegra_i2c_xfer_msg(struct tegra_i2c_dev *i2c_dev,
if (likely(i2c_dev->msg_err == I2C_ERR_NONE))
return 0;
/*
* NACK interrupt is generated before the I2C controller generates
* the STOP condition on the bus. So wait for 2 clock periods
* before resetting the controller so that the STOP condition has
* been delivered properly.
*/
if (i2c_dev->msg_err == I2C_ERR_NO_ACK)
udelay(DIV_ROUND_UP(2 * 1000000, i2c_dev->bus_clk_rate));
tegra_i2c_init(i2c_dev);
if (i2c_dev->msg_err == I2C_ERR_NO_ACK) {
if (msg->flags & I2C_M_IGNORE_NAK)

View File

@ -198,7 +198,16 @@ int i2c_generic_scl_recovery(struct i2c_adapter *adap)
val = !val;
bri->set_scl(adap, val);
ndelay(RECOVERY_NDELAY);
/*
* If we can set SDA, we will always create STOP here to ensure
* the additional pulses will do no harm. This is achieved by
* letting SDA follow SCL half a cycle later.
*/
ndelay(RECOVERY_NDELAY / 2);
if (bri->set_sda)
bri->set_sda(adap, val);
ndelay(RECOVERY_NDELAY / 2);
}
/* check if recovery actually succeeded */