diff --git a/arch/arm/mach-bcm/board_bcm2835.c b/arch/arm/mach-bcm/board_bcm2835.c
index 0c1edfc98696..24af33f91705 100644
--- a/arch/arm/mach-bcm/board_bcm2835.c
+++ b/arch/arm/mach-bcm/board_bcm2835.c
@@ -15,16 +15,10 @@
 #include <linux/init.h>
 #include <linux/irqchip.h>
 #include <linux/of_address.h>
-#include <linux/clk/bcm2835.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-static void __init bcm2835_init(void)
-{
-	bcm2835_init_clocks();
-}
-
 static const char * const bcm2835_compat[] = {
 #ifdef CONFIG_ARCH_MULTI_V6
 	"brcm,bcm2835",
@@ -36,6 +30,5 @@ static const char * const bcm2835_compat[] = {
 };
 
 DT_MACHINE_START(BCM2835, "BCM2835")
-	.init_machine = bcm2835_init,
 	.dt_compat = bcm2835_compat
 MACHINE_END
diff --git a/drivers/clk/bcm/clk-bcm2835-aux.c b/drivers/clk/bcm/clk-bcm2835-aux.c
index bd750cf2238d..77e276d61702 100644
--- a/drivers/clk/bcm/clk-bcm2835-aux.c
+++ b/drivers/clk/bcm/clk-bcm2835-aux.c
@@ -14,7 +14,6 @@
 
 #include <linux/clk.h>
 #include <linux/clk-provider.h>
-#include <linux/clk/bcm2835.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
 #include <dt-bindings/clock/bcm2835-aux.h>
diff --git a/drivers/clk/bcm/clk-bcm2835.c b/drivers/clk/bcm/clk-bcm2835.c
index 58ce6af8452d..44301a3d9963 100644
--- a/drivers/clk/bcm/clk-bcm2835.c
+++ b/drivers/clk/bcm/clk-bcm2835.c
@@ -37,7 +37,6 @@
 #include <linux/clk-provider.h>
 #include <linux/clkdev.h>
 #include <linux/clk.h>
-#include <linux/clk/bcm2835.h>
 #include <linux/debugfs.h>
 #include <linux/delay.h>
 #include <linux/module.h>
@@ -416,35 +415,6 @@ static int bcm2835_debugfs_regset(struct bcm2835_cprman *cprman, u32 base,
 	return regdump ? 0 : -ENOMEM;
 }
 
-/*
- * These are fixed clocks. They're probably not all root clocks and it may
- * be possible to turn them on and off but until this is mapped out better
- * it's the only way they can be used.
- */
-void __init bcm2835_init_clocks(void)
-{
-	struct clk_hw *hw;
-	int ret;
-
-	hw = clk_hw_register_fixed_rate(NULL, "apb_pclk", NULL, 0, 126000000);
-	if (IS_ERR(hw))
-		pr_err("apb_pclk not registered\n");
-
-	hw = clk_hw_register_fixed_rate(NULL, "uart0_pclk", NULL, 0, 3000000);
-	if (IS_ERR(hw))
-		pr_err("uart0_pclk not registered\n");
-	ret = clk_hw_register_clkdev(hw, NULL, "20201000.uart");
-	if (ret)
-		pr_err("uart0_pclk alias not registered\n");
-
-	hw = clk_hw_register_fixed_rate(NULL, "uart1_pclk", NULL, 0, 125000000);
-	if (IS_ERR(hw))
-		pr_err("uart1_pclk not registered\n");
-	ret = clk_hw_register_clkdev(hw, NULL, "20215000.uart");
-	if (ret)
-		pr_err("uart1_pclk alias not registered\n");
-}
-
 struct bcm2835_pll_data {
 	const char *name;
 	u32 cm_ctrl_reg;
diff --git a/include/linux/clk/bcm2835.h b/include/linux/clk/bcm2835.h
deleted file mode 100644
index aa937f6c17da..000000000000
--- a/include/linux/clk/bcm2835.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * Copyright (C) 2010 Broadcom
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef __LINUX_CLK_BCM2835_H_
-#define __LINUX_CLK_BCM2835_H_
-
-void __init bcm2835_init_clocks(void);
-
-#endif