davidlt/kernel-ark
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
fde4e2f732
kernel-ark/drivers/hid/hid-debug.c

1086 lines
35 KiB
C
Raw Normal View History

HID: hid debug from hid-debug.h to hid layer hid-debug.h contains a lot of code, and should not therefore be a header. This patch moves the code to generic hid layer as .c source, and introduces CONFIG_HID_DEBUG to conditionally compile it, instead of playing with #define DEBUG and including hid-debug.h. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-01-25 10:43:31 +00:00
/*
* (c) 1999 Andreas Gal <gal@cs.uni-magdeburg.de>
* (c) 2000-2001 Vojtech Pavlik <vojtech@ucw.cz>
HID: use debugfs for report dumping descriptor It is a little bit inconvenient for people who have some non-standard HID hardware (usually violating the HID specification) to have to recompile kernel with CONFIG_HID_DEBUG to be able to see kernel's perspective of the HID report descriptor and observe the parsed events. Plus the messages are then mixed up inconveniently with the rest of the dmesg stuff. This patch implements /sys/kernel/debug/hid/<device>/rdesc file, which represents the kernel's view of report descriptor (both the raw report descriptor data and parsed contents). With all the device-specific debug data being available through debugfs, there is no need for keeping CONFIG_HID_DEBUG, as the 'debug' parameter to the hid module will now only output only driver-specific debugging options, which has absolutely minimal memory footprint, just a few error messages and one global flag (hid_debug). We use the current set of output formatting functions. The ones that need to be used both for one-shot rdesc seq_file and also for continuous flow of data (individual reports, as being sent by the device) distinguish according to the passed seq_file parameter, and if it is NULL, it still output to kernel ringbuffer, otherwise the corresponding seq_file is used for output. The format of the output is preserved. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-06-12 13:20:55 +00:00
* (c) 2007-2009 Jiri Kosina
HID: hid debug from hid-debug.h to hid layer hid-debug.h contains a lot of code, and should not therefore be a header. This patch moves the code to generic hid layer as .c source, and introduces CONFIG_HID_DEBUG to conditionally compile it, instead of playing with #define DEBUG and including hid-debug.h. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-01-25 10:43:31 +00:00
*
HID: use debugfs for report dumping descriptor It is a little bit inconvenient for people who have some non-standard HID hardware (usually violating the HID specification) to have to recompile kernel with CONFIG_HID_DEBUG to be able to see kernel's perspective of the HID report descriptor and observe the parsed events. Plus the messages are then mixed up inconveniently with the rest of the dmesg stuff. This patch implements /sys/kernel/debug/hid/<device>/rdesc file, which represents the kernel's view of report descriptor (both the raw report descriptor data and parsed contents). With all the device-specific debug data being available through debugfs, there is no need for keeping CONFIG_HID_DEBUG, as the 'debug' parameter to the hid module will now only output only driver-specific debugging options, which has absolutely minimal memory footprint, just a few error messages and one global flag (hid_debug). We use the current set of output formatting functions. The ones that need to be used both for one-shot rdesc seq_file and also for continuous flow of data (individual reports, as being sent by the device) distinguish according to the passed seq_file parameter, and if it is NULL, it still output to kernel ringbuffer, otherwise the corresponding seq_file is used for output. The format of the output is preserved. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-06-12 13:20:55 +00:00
* HID debugging support
HID: hid debug from hid-debug.h to hid layer hid-debug.h contains a lot of code, and should not therefore be a header. This patch moves the code to generic hid layer as .c source, and introduces CONFIG_HID_DEBUG to conditionally compile it, instead of playing with #define DEBUG and including hid-debug.h. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-01-25 10:43:31 +00:00
*/
/*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
* Should you need to contact me, the author, you can do so either by
* e-mail - mail your message to <vojtech@ucw.cz>, or by paper mail:
* Vojtech Pavlik, Simunkova 1594, Prague 8, 182 00 Czech Republic
*/
HID: use debugfs for report dumping descriptor It is a little bit inconvenient for people who have some non-standard HID hardware (usually violating the HID specification) to have to recompile kernel with CONFIG_HID_DEBUG to be able to see kernel's perspective of the HID report descriptor and observe the parsed events. Plus the messages are then mixed up inconveniently with the rest of the dmesg stuff. This patch implements /sys/kernel/debug/hid/<device>/rdesc file, which represents the kernel's view of report descriptor (both the raw report descriptor data and parsed contents). With all the device-specific debug data being available through debugfs, there is no need for keeping CONFIG_HID_DEBUG, as the 'debug' parameter to the hid module will now only output only driver-specific debugging options, which has absolutely minimal memory footprint, just a few error messages and one global flag (hid_debug). We use the current set of output formatting functions. The ones that need to be used both for one-shot rdesc seq_file and also for continuous flow of data (individual reports, as being sent by the device) distinguish according to the passed seq_file parameter, and if it is NULL, it still output to kernel ringbuffer, otherwise the corresponding seq_file is used for output. The format of the output is preserved. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-06-12 13:20:55 +00:00
#include <linux/debugfs.h>
#include <linux/seq_file.h>
HID: use debugfs for events/reports dumping This is a followup patch to the one implemeting rdesc representation in debugfs rather than being dependent on compile-time CONFIG_HID_DEBUG setting. The API of the appropriate formatting functions is slightly modified -- if they are passed seq_file pointer, the one-shot output for 'rdesc' file mode is used, and therefore the message is formatted into the corresponding seq_file immediately. Otherwise the called function allocated a new buffer, formats the text into the buffer and returns the pointer to it, so that it can be queued into the ring-buffer of the processess blocked waiting on input on 'events' file in debugfs. 'debug' parameter to the 'hid' module is now used solely for the prupose of inetrnal driver state debugging (parser, transport, etc). Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-06-12 13:20:57 +00:00
#include <linux/sched.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 08:04:11 +00:00
#include <linux/slab.h>
HID: use debugfs for events/reports dumping This is a followup patch to the one implemeting rdesc representation in debugfs rather than being dependent on compile-time CONFIG_HID_DEBUG setting. The API of the appropriate formatting functions is slightly modified -- if they are passed seq_file pointer, the one-shot output for 'rdesc' file mode is used, and therefore the message is formatted into the corresponding seq_file immediately. Otherwise the called function allocated a new buffer, formats the text into the buffer and returns the pointer to it, so that it can be queued into the ring-buffer of the processess blocked waiting on input on 'events' file in debugfs. 'debug' parameter to the 'hid' module is now used solely for the prupose of inetrnal driver state debugging (parser, transport, etc). Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-06-12 13:20:57 +00:00
#include <linux/uaccess.h>
#include <linux/poll.h>
HID: hid debug from hid-debug.h to hid layer hid-debug.h contains a lot of code, and should not therefore be a header. This patch moves the code to generic hid layer as .c source, and introduces CONFIG_HID_DEBUG to conditionally compile it, instead of playing with #define DEBUG and including hid-debug.h. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-01-25 10:43:31 +00:00
#include <linux/hid.h>
HID: hid-debug.c should #include <linux/hid-debug.h> Every file should include the headers containing the prototypes for it's global functions. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-02-21 11:57:30 +00:00
#include <linux/hid-debug.h>
HID: hid debug from hid-debug.h to hid layer hid-debug.h contains a lot of code, and should not therefore be a header. This patch moves the code to generic hid layer as .c source, and introduces CONFIG_HID_DEBUG to conditionally compile it, instead of playing with #define DEBUG and including hid-debug.h. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-01-25 10:43:31 +00:00
HID: use debugfs for report dumping descriptor It is a little bit inconvenient for people who have some non-standard HID hardware (usually violating the HID specification) to have to recompile kernel with CONFIG_HID_DEBUG to be able to see kernel's perspective of the HID report descriptor and observe the parsed events. Plus the messages are then mixed up inconveniently with the rest of the dmesg stuff. This patch implements /sys/kernel/debug/hid/<device>/rdesc file, which represents the kernel's view of report descriptor (both the raw report descriptor data and parsed contents). With all the device-specific debug data being available through debugfs, there is no need for keeping CONFIG_HID_DEBUG, as the 'debug' parameter to the hid module will now only output only driver-specific debugging options, which has absolutely minimal memory footprint, just a few error messages and one global flag (hid_debug). We use the current set of output formatting functions. The ones that need to be used both for one-shot rdesc seq_file and also for continuous flow of data (individual reports, as being sent by the device) distinguish according to the passed seq_file parameter, and if it is NULL, it still output to kernel ringbuffer, otherwise the corresponding seq_file is used for output. The format of the output is preserved. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-06-12 13:20:55 +00:00
static struct dentry *hid_debug_root;
HID: hid debug from hid-debug.h to hid layer hid-debug.h contains a lot of code, and should not therefore be a header. This patch moves the code to generic hid layer as .c source, and introduces CONFIG_HID_DEBUG to conditionally compile it, instead of playing with #define DEBUG and including hid-debug.h. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-01-25 10:43:31 +00:00
struct hid_usage_entry {
unsigned page;
unsigned usage;
HID: trivial fixes in hid-debug - added KERN_DEBUG to output lines - fixed preffered -> preferred typo - added const to char *'s Also, exported symbol hid_resolv_event is unused by the current kernel tree and perhaps should be removed. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-09-26 14:29:53 +00:00
const char *description;
HID: hid debug from hid-debug.h to hid layer hid-debug.h contains a lot of code, and should not therefore be a header. This patch moves the code to generic hid layer as .c source, and introduces CONFIG_HID_DEBUG to conditionally compile it, instead of playing with #define DEBUG and including hid-debug.h. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-01-25 10:43:31 +00:00
};
static const struct hid_usage_entry hid_usage_table[] = {
{ 0, 0, "Undefined" },
{ 1, 0, "GenericDesktop" },
{0, 0x01, "Pointer"},
{0, 0x02, "Mouse"},
{0, 0x04, "Joystick"},
{0, 0x05, "GamePad"},
{0, 0x06, "Keyboard"},
{0, 0x07, "Keypad"},
{0, 0x08, "MultiAxis"},
{0, 0x30, "X"},
{0, 0x31, "Y"},
{0, 0x32, "Z"},
{0, 0x33, "Rx"},
{0, 0x34, "Ry"},
{0, 0x35, "Rz"},
{0, 0x36, "Slider"},
{0, 0x37, "Dial"},
{0, 0x38, "Wheel"},
{0, 0x39, "HatSwitch"},
{0, 0x3a, "CountedBuffer"},
{0, 0x3b, "ByteCount"},
{0, 0x3c, "MotionWakeup"},
{0, 0x3d, "Start"},
{0, 0x3e, "Select"},
{0, 0x40, "Vx"},
{0, 0x41, "Vy"},
{0, 0x42, "Vz"},
{0, 0x43, "Vbrx"},
{0, 0x44, "Vbry"},
{0, 0x45, "Vbrz"},
{0, 0x46, "Vno"},
{0, 0x80, "SystemControl"},
{0, 0x81, "SystemPowerDown"},
{0, 0x82, "SystemSleep"},
{0, 0x83, "SystemWakeUp"},
{0, 0x84, "SystemContextMenu"},
{0, 0x85, "SystemMainMenu"},
{0, 0x86, "SystemAppMenu"},
{0, 0x87, "SystemMenuHelp"},
{0, 0x88, "SystemMenuExit"},
{0, 0x89, "SystemMenuSelect"},
{0, 0x8a, "SystemMenuRight"},
{0, 0x8b, "SystemMenuLeft"},
{0, 0x8c, "SystemMenuUp"},
{0, 0x8d, "SystemMenuDown"},
{0, 0x90, "D-PadUp"},
{0, 0x91, "D-PadDown"},
{0, 0x92, "D-PadRight"},
{0, 0x93, "D-PadLeft"},
{ 2, 0, "Simulation" },
{0, 0xb0, "Aileron"},
{0, 0xb1, "AileronTrim"},
{0, 0xb2, "Anti-Torque"},
{0, 0xb3, "Autopilot"},
{0, 0xb4, "Chaff"},
{0, 0xb5, "Collective"},
{0, 0xb6, "DiveBrake"},
{0, 0xb7, "ElectronicCountermeasures"},
{0, 0xb8, "Elevator"},
{0, 0xb9, "ElevatorTrim"},
{0, 0xba, "Rudder"},
{0, 0xbb, "Throttle"},
{0, 0xbc, "FlightCommunications"},
{0, 0xbd, "FlareRelease"},
{0, 0xbe, "LandingGear"},
{0, 0xbf, "ToeBrake"},
{ 7, 0, "Keyboard" },
{ 8, 0, "LED" },
{0, 0x01, "NumLock"},
{0, 0x02, "CapsLock"},
{0, 0x03, "ScrollLock"},
{0, 0x04, "Compose"},
{0, 0x05, "Kana"},
{0, 0x4b, "GenericIndicator"},
{ 9, 0, "Button" },
{ 10, 0, "Ordinal" },
{ 12, 0, "Consumer" },
{0, 0x238, "HorizontalWheel"},
{ 13, 0, "Digitizers" },
{0, 0x01, "Digitizer"},
{0, 0x02, "Pen"},
{0, 0x03, "LightPen"},
{0, 0x04, "TouchScreen"},
{0, 0x05, "TouchPad"},
{0, 0x20, "Stylus"},
{0, 0x21, "Puck"},
{0, 0x22, "Finger"},
{0, 0x30, "TipPressure"},
{0, 0x31, "BarrelPressure"},
{0, 0x32, "InRange"},
{0, 0x33, "Touch"},
{0, 0x34, "UnTouch"},
{0, 0x35, "Tap"},
{0, 0x39, "TabletFunctionKey"},
{0, 0x3a, "ProgramChangeKey"},
{0, 0x3c, "Invert"},
{0, 0x42, "TipSwitch"},
{0, 0x43, "SecondaryTipSwitch"},
{0, 0x44, "BarrelSwitch"},
{0, 0x45, "Eraser"},
{0, 0x46, "TabletPick"},
HID: add new multitouch and digitizer contants Added constants to hid.h for all digitizer usages (including the new multitouch ones that are not yet in the official USB spec but are being pushed by Microsft as described in their paper "Digitizer Drivers for Windows Touch and Pen-Based Computers"). Updated hid-debug.c to support the new MT input constants such as ABS_MT_POSITION_X. Signed-off-by: Stephane Chatty <chatty@enac.fr> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-05-20 13:41:24 +00:00
{0, 0x47, "Confidence"},
{0, 0x48, "Width"},
{0, 0x49, "Height"},
{0, 0x51, "ContactID"},
{0, 0x52, "InputMode"},
{0, 0x53, "DeviceIndex"},
{0, 0x54, "ContactCount"},
{0, 0x55, "ContactMaximumNumber"},
HID: hid debug from hid-debug.h to hid layer hid-debug.h contains a lot of code, and should not therefore be a header. This patch moves the code to generic hid layer as .c source, and introduces CONFIG_HID_DEBUG to conditionally compile it, instead of playing with #define DEBUG and including hid-debug.h. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-01-25 10:43:31 +00:00
{ 15, 0, "PhysicalInterfaceDevice" },
{0, 0x00, "Undefined"},
{0, 0x01, "Physical_Interface_Device"},
{0, 0x20, "Normal"},
{0, 0x21, "Set_Effect_Report"},
{0, 0x22, "Effect_Block_Index"},
{0, 0x23, "Parameter_Block_Offset"},
{0, 0x24, "ROM_Flag"},
{0, 0x25, "Effect_Type"},
{0, 0x26, "ET_Constant_Force"},
{0, 0x27, "ET_Ramp"},
{0, 0x28, "ET_Custom_Force_Data"},
{0, 0x30, "ET_Square"},
{0, 0x31, "ET_Sine"},
{0, 0x32, "ET_Triangle"},
{0, 0x33, "ET_Sawtooth_Up"},
{0, 0x34, "ET_Sawtooth_Down"},
{0, 0x40, "ET_Spring"},
{0, 0x41, "ET_Damper"},
{0, 0x42, "ET_Inertia"},
{0, 0x43, "ET_Friction"},
{0, 0x50, "Duration"},
{0, 0x51, "Sample_Period"},
{0, 0x52, "Gain"},
{0, 0x53, "Trigger_Button"},
{0, 0x54, "Trigger_Repeat_Interval"},
{0, 0x55, "Axes_Enable"},
{0, 0x56, "Direction_Enable"},
{0, 0x57, "Direction"},
{0, 0x58, "Type_Specific_Block_Offset"},
{0, 0x59, "Block_Type"},
{0, 0x5A, "Set_Envelope_Report"},
{0, 0x5B, "Attack_Level"},
{0, 0x5C, "Attack_Time"},
{0, 0x5D, "Fade_Level"},
{0, 0x5E, "Fade_Time"},
{0, 0x5F, "Set_Condition_Report"},
{0, 0x60, "CP_Offset"},
{0, 0x61, "Positive_Coefficient"},
{0, 0x62, "Negative_Coefficient"},
{0, 0x63, "Positive_Saturation"},
{0, 0x64, "Negative_Saturation"},
{0, 0x65, "Dead_Band"},
{0, 0x66, "Download_Force_Sample"},
{0, 0x67, "Isoch_Custom_Force_Enable"},
{0, 0x68, "Custom_Force_Data_Report"},
{0, 0x69, "Custom_Force_Data"},
{0, 0x6A, "Custom_Force_Vendor_Defined_Data"},
{0, 0x6B, "Set_Custom_Force_Report"},
{0, 0x6C, "Custom_Force_Data_Offset"},
{0, 0x6D, "Sample_Count"},
{0, 0x6E, "Set_Periodic_Report"},
{0, 0x6F, "Offset"},
{0, 0x70, "Magnitude"},
{0, 0x71, "Phase"},
{0, 0x72, "Period"},
{0, 0x73, "Set_Constant_Force_Report"},
{0, 0x74, "Set_Ramp_Force_Report"},
{0, 0x75, "Ramp_Start"},
{0, 0x76, "Ramp_End"},
{0, 0x77, "Effect_Operation_Report"},
{0, 0x78, "Effect_Operation"},
{0, 0x79, "Op_Effect_Start"},
{0, 0x7A, "Op_Effect_Start_Solo"},
{0, 0x7B, "Op_Effect_Stop"},
{0, 0x7C, "Loop_Count"},
{0, 0x7D, "Device_Gain_Report"},
{0, 0x7E, "Device_Gain"},
{0, 0x7F, "PID_Pool_Report"},
{0, 0x80, "RAM_Pool_Size"},
{0, 0x81, "ROM_Pool_Size"},
{0, 0x82, "ROM_Effect_Block_Count"},
{0, 0x83, "Simultaneous_Effects_Max"},
{0, 0x84, "Pool_Alignment"},
{0, 0x85, "PID_Pool_Move_Report"},
{0, 0x86, "Move_Source"},
{0, 0x87, "Move_Destination"},
{0, 0x88, "Move_Length"},
{0, 0x89, "PID_Block_Load_Report"},
{0, 0x8B, "Block_Load_Status"},
{0, 0x8C, "Block_Load_Success"},
{0, 0x8D, "Block_Load_Full"},
{0, 0x8E, "Block_Load_Error"},
{0, 0x8F, "Block_Handle"},
{0, 0x90, "PID_Block_Free_Report"},
{0, 0x91, "Type_Specific_Block_Handle"},
{0, 0x92, "PID_State_Report"},
{0, 0x94, "Effect_Playing"},
{0, 0x95, "PID_Device_Control_Report"},
{0, 0x96, "PID_Device_Control"},
{0, 0x97, "DC_Enable_Actuators"},
{0, 0x98, "DC_Disable_Actuators"},
{0, 0x99, "DC_Stop_All_Effects"},
{0, 0x9A, "DC_Device_Reset"},
{0, 0x9B, "DC_Device_Pause"},
{0, 0x9C, "DC_Device_Continue"},
{0, 0x9F, "Device_Paused"},
{0, 0xA0, "Actuators_Enabled"},
{0, 0xA4, "Safety_Switch"},
{0, 0xA5, "Actuator_Override_Switch"},
{0, 0xA6, "Actuator_Power"},
{0, 0xA7, "Start_Delay"},
{0, 0xA8, "Parameter_Block_Size"},
{0, 0xA9, "Device_Managed_Pool"},
{0, 0xAA, "Shared_Parameter_Blocks"},
{0, 0xAB, "Create_New_Effect_Report"},
{0, 0xAC, "RAM_Pool_Available"},
{ 0x84, 0, "Power Device" },
{ 0x84, 0x02, "PresentStatus" },
{ 0x84, 0x03, "ChangeStatus" },
{ 0x84, 0x04, "UPS" },
{ 0x84, 0x05, "PowerSupply" },
{ 0x84, 0x10, "BatterySystem" },
{ 0x84, 0x11, "BatterySystemID" },
{ 0x84, 0x12, "Battery" },
{ 0x84, 0x13, "BatteryID" },
{ 0x84, 0x14, "Charger" },
{ 0x84, 0x15, "ChargerID" },
{ 0x84, 0x16, "PowerConverter" },
{ 0x84, 0x17, "PowerConverterID" },
{ 0x84, 0x18, "OutletSystem" },
{ 0x84, 0x19, "OutletSystemID" },
{ 0x84, 0x1a, "Input" },
{ 0x84, 0x1b, "InputID" },
{ 0x84, 0x1c, "Output" },
{ 0x84, 0x1d, "OutputID" },
{ 0x84, 0x1e, "Flow" },
{ 0x84, 0x1f, "FlowID" },
{ 0x84, 0x20, "Outlet" },
{ 0x84, 0x21, "OutletID" },
{ 0x84, 0x22, "Gang" },
{ 0x84, 0x24, "PowerSummary" },
{ 0x84, 0x25, "PowerSummaryID" },
{ 0x84, 0x30, "Voltage" },
{ 0x84, 0x31, "Current" },
{ 0x84, 0x32, "Frequency" },
{ 0x84, 0x33, "ApparentPower" },
{ 0x84, 0x35, "PercentLoad" },
{ 0x84, 0x40, "ConfigVoltage" },
{ 0x84, 0x41, "ConfigCurrent" },
{ 0x84, 0x43, "ConfigApparentPower" },
{ 0x84, 0x53, "LowVoltageTransfer" },
{ 0x84, 0x54, "HighVoltageTransfer" },
{ 0x84, 0x56, "DelayBeforeStartup" },
{ 0x84, 0x57, "DelayBeforeShutdown" },
{ 0x84, 0x58, "Test" },
{ 0x84, 0x5a, "AudibleAlarmControl" },
{ 0x84, 0x60, "Present" },
{ 0x84, 0x61, "Good" },
{ 0x84, 0x62, "InternalFailure" },
{ 0x84, 0x65, "Overload" },
{ 0x84, 0x66, "OverCharged" },
{ 0x84, 0x67, "OverTemperature" },
{ 0x84, 0x68, "ShutdownRequested" },
{ 0x84, 0x69, "ShutdownImminent" },
{ 0x84, 0x6b, "SwitchOn/Off" },
{ 0x84, 0x6c, "Switchable" },
{ 0x84, 0x6d, "Used" },
{ 0x84, 0x6e, "Boost" },
{ 0x84, 0x73, "CommunicationLost" },
{ 0x84, 0xfd, "iManufacturer" },
{ 0x84, 0xfe, "iProduct" },
{ 0x84, 0xff, "iSerialNumber" },
{ 0x85, 0, "Battery System" },
{ 0x85, 0x01, "SMBBatteryMode" },
{ 0x85, 0x02, "SMBBatteryStatus" },
{ 0x85, 0x03, "SMBAlarmWarning" },
{ 0x85, 0x04, "SMBChargerMode" },
{ 0x85, 0x05, "SMBChargerStatus" },
{ 0x85, 0x06, "SMBChargerSpecInfo" },
{ 0x85, 0x07, "SMBSelectorState" },
{ 0x85, 0x08, "SMBSelectorPresets" },
{ 0x85, 0x09, "SMBSelectorInfo" },
{ 0x85, 0x29, "RemainingCapacityLimit" },
{ 0x85, 0x2c, "CapacityMode" },
{ 0x85, 0x42, "BelowRemainingCapacityLimit" },
{ 0x85, 0x44, "Charging" },
{ 0x85, 0x45, "Discharging" },
{ 0x85, 0x4b, "NeedReplacement" },
{ 0x85, 0x66, "RemainingCapacity" },
{ 0x85, 0x68, "RunTimeToEmpty" },
{ 0x85, 0x6a, "AverageTimeToFull" },
{ 0x85, 0x83, "DesignCapacity" },
{ 0x85, 0x85, "ManufacturerDate" },
{ 0x85, 0x89, "iDeviceChemistry" },
{ 0x85, 0x8b, "Rechargable" },
{ 0x85, 0x8f, "iOEMInformation" },
{ 0x85, 0x8d, "CapacityGranularity1" },
{ 0x85, 0xd0, "ACPresent" },
/* pages 0xff00 to 0xffff are vendor-specific */
{ 0xffff, 0, "Vendor-specific-FF" },
{ 0, 0, NULL }
};
HID: use debugfs for events/reports dumping This is a followup patch to the one implemeting rdesc representation in debugfs rather than being dependent on compile-time CONFIG_HID_DEBUG setting. The API of the appropriate formatting functions is slightly modified -- if they are passed seq_file pointer, the one-shot output for 'rdesc' file mode is used, and therefore the message is formatted into the corresponding seq_file immediately. Otherwise the called function allocated a new buffer, formats the text into the buffer and returns the pointer to it, so that it can be queued into the ring-buffer of the processess blocked waiting on input on 'events' file in debugfs. 'debug' parameter to the 'hid' module is now used solely for the prupose of inetrnal driver state debugging (parser, transport, etc). Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-06-12 13:20:57 +00:00
/* Either output directly into simple seq_file, or (if f == NULL)
* allocate a separate buffer that will then be passed to the 'events'
* ringbuffer.
*
* This is because these functions can be called both for "one-shot"
* "rdesc" while resolving, or for blocking "events".
*
* This holds both for resolv_usage_page() and hid_resolv_usage().
*/
static char *resolv_usage_page(unsigned page, struct seq_file *f) {
HID: hid debug from hid-debug.h to hid layer hid-debug.h contains a lot of code, and should not therefore be a header. This patch moves the code to generic hid layer as .c source, and introduces CONFIG_HID_DEBUG to conditionally compile it, instead of playing with #define DEBUG and including hid-debug.h. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-01-25 10:43:31 +00:00
const struct hid_usage_entry *p;
HID: use debugfs for events/reports dumping This is a followup patch to the one implemeting rdesc representation in debugfs rather than being dependent on compile-time CONFIG_HID_DEBUG setting. The API of the appropriate formatting functions is slightly modified -- if they are passed seq_file pointer, the one-shot output for 'rdesc' file mode is used, and therefore the message is formatted into the corresponding seq_file immediately. Otherwise the called function allocated a new buffer, formats the text into the buffer and returns the pointer to it, so that it can be queued into the ring-buffer of the processess blocked waiting on input on 'events' file in debugfs. 'debug' parameter to the 'hid' module is now used solely for the prupose of inetrnal driver state debugging (parser, transport, etc). Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-06-12 13:20:57 +00:00
char *buf = NULL;
if (!f) {
buf = kzalloc(sizeof(char) * HID_DEBUG_BUFSIZE, GFP_ATOMIC);
if (!buf)
return ERR_PTR(-ENOMEM);
}
HID: hid debug from hid-debug.h to hid layer hid-debug.h contains a lot of code, and should not therefore be a header. This patch moves the code to generic hid layer as .c source, and introduces CONFIG_HID_DEBUG to conditionally compile it, instead of playing with #define DEBUG and including hid-debug.h. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-01-25 10:43:31 +00:00
for (p = hid_usage_table; p->description; p++)
if (p->page == page) {
HID: use debugfs for events/reports dumping This is a followup patch to the one implemeting rdesc representation in debugfs rather than being dependent on compile-time CONFIG_HID_DEBUG setting. The API of the appropriate formatting functions is slightly modified -- if they are passed seq_file pointer, the one-shot output for 'rdesc' file mode is used, and therefore the message is formatted into the corresponding seq_file immediately. Otherwise the called function allocated a new buffer, formats the text into the buffer and returns the pointer to it, so that it can be queued into the ring-buffer of the processess blocked waiting on input on 'events' file in debugfs. 'debug' parameter to the 'hid' module is now used solely for the prupose of inetrnal driver state debugging (parser, transport, etc). Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-06-12 13:20:57 +00:00
if (!f) {
snprintf(buf, HID_DEBUG_BUFSIZE, "%s",
p->description);
return buf;
}
else {
HID: use debugfs for report dumping descriptor It is a little bit inconvenient for people who have some non-standard HID hardware (usually violating the HID specification) to have to recompile kernel with CONFIG_HID_DEBUG to be able to see kernel's perspective of the HID report descriptor and observe the parsed events. Plus the messages are then mixed up inconveniently with the rest of the dmesg stuff. This patch implements /sys/kernel/debug/hid/<device>/rdesc file, which represents the kernel's view of report descriptor (both the raw report descriptor data and parsed contents). With all the device-specific debug data being available through debugfs, there is no need for keeping CONFIG_HID_DEBUG, as the 'debug' parameter to the hid module will now only output only driver-specific debugging options, which has absolutely minimal memory footprint, just a few error messages and one global flag (hid_debug). We use the current set of output formatting functions. The ones that need to be used both for one-shot rdesc seq_file and also for continuous flow of data (individual reports, as being sent by the device) distinguish according to the passed seq_file parameter, and if it is NULL, it still output to kernel ringbuffer, otherwise the corresponding seq_file is used for output. The format of the output is preserved. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-06-12 13:20:55 +00:00
seq_printf(f, "%s", p->description);
HID: use debugfs for events/reports dumping This is a followup patch to the one implemeting rdesc representation in debugfs rather than being dependent on compile-time CONFIG_HID_DEBUG setting. The API of the appropriate formatting functions is slightly modified -- if they are passed seq_file pointer, the one-shot output for 'rdesc' file mode is used, and therefore the message is formatted into the corresponding seq_file immediately. Otherwise the called function allocated a new buffer, formats the text into the buffer and returns the pointer to it, so that it can be queued into the ring-buffer of the processess blocked waiting on input on 'events' file in debugfs. 'debug' parameter to the 'hid' module is now used solely for the prupose of inetrnal driver state debugging (parser, transport, etc). Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-06-12 13:20:57 +00:00
return NULL;
}
HID: hid debug from hid-debug.h to hid layer hid-debug.h contains a lot of code, and should not therefore be a header. This patch moves the code to generic hid layer as .c source, and introduces CONFIG_HID_DEBUG to conditionally compile it, instead of playing with #define DEBUG and including hid-debug.h. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-01-25 10:43:31 +00:00
}
HID: use debugfs for report dumping descriptor It is a little bit inconvenient for people who have some non-standard HID hardware (usually violating the HID specification) to have to recompile kernel with CONFIG_HID_DEBUG to be able to see kernel's perspective of the HID report descriptor and observe the parsed events. Plus the messages are then mixed up inconveniently with the rest of the dmesg stuff. This patch implements /sys/kernel/debug/hid/<device>/rdesc file, which represents the kernel's view of report descriptor (both the raw report descriptor data and parsed contents). With all the device-specific debug data being available through debugfs, there is no need for keeping CONFIG_HID_DEBUG, as the 'debug' parameter to the hid module will now only output only driver-specific debugging options, which has absolutely minimal memory footprint, just a few error messages and one global flag (hid_debug). We use the current set of output formatting functions. The ones that need to be used both for one-shot rdesc seq_file and also for continuous flow of data (individual reports, as being sent by the device) distinguish according to the passed seq_file parameter, and if it is NULL, it still output to kernel ringbuffer, otherwise the corresponding seq_file is used for output. The format of the output is preserved. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-06-12 13:20:55 +00:00
if (!f)
HID: use debugfs for events/reports dumping This is a followup patch to the one implemeting rdesc representation in debugfs rather than being dependent on compile-time CONFIG_HID_DEBUG setting. The API of the appropriate formatting functions is slightly modified -- if they are passed seq_file pointer, the one-shot output for 'rdesc' file mode is used, and therefore the message is formatted into the corresponding seq_file immediately. Otherwise the called function allocated a new buffer, formats the text into the buffer and returns the pointer to it, so that it can be queued into the ring-buffer of the processess blocked waiting on input on 'events' file in debugfs. 'debug' parameter to the 'hid' module is now used solely for the prupose of inetrnal driver state debugging (parser, transport, etc). Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-06-12 13:20:57 +00:00
snprintf(buf, HID_DEBUG_BUFSIZE, "%04x", page);
HID: use debugfs for report dumping descriptor It is a little bit inconvenient for people who have some non-standard HID hardware (usually violating the HID specification) to have to recompile kernel with CONFIG_HID_DEBUG to be able to see kernel's perspective of the HID report descriptor and observe the parsed events. Plus the messages are then mixed up inconveniently with the rest of the dmesg stuff. This patch implements /sys/kernel/debug/hid/<device>/rdesc file, which represents the kernel's view of report descriptor (both the raw report descriptor data and parsed contents). With all the device-specific debug data being available through debugfs, there is no need for keeping CONFIG_HID_DEBUG, as the 'debug' parameter to the hid module will now only output only driver-specific debugging options, which has absolutely minimal memory footprint, just a few error messages and one global flag (hid_debug). We use the current set of output formatting functions. The ones that need to be used both for one-shot rdesc seq_file and also for continuous flow of data (individual reports, as being sent by the device) distinguish according to the passed seq_file parameter, and if it is NULL, it still output to kernel ringbuffer, otherwise the corresponding seq_file is used for output. The format of the output is preserved. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-06-12 13:20:55 +00:00
else
seq_printf(f, "%04x", page);
HID: use debugfs for events/reports dumping This is a followup patch to the one implemeting rdesc representation in debugfs rather than being dependent on compile-time CONFIG_HID_DEBUG setting. The API of the appropriate formatting functions is slightly modified -- if they are passed seq_file pointer, the one-shot output for 'rdesc' file mode is used, and therefore the message is formatted into the corresponding seq_file immediately. Otherwise the called function allocated a new buffer, formats the text into the buffer and returns the pointer to it, so that it can be queued into the ring-buffer of the processess blocked waiting on input on 'events' file in debugfs. 'debug' parameter to the 'hid' module is now used solely for the prupose of inetrnal driver state debugging (parser, transport, etc). Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-06-12 13:20:57 +00:00
return buf;
HID: hid debug from hid-debug.h to hid layer hid-debug.h contains a lot of code, and should not therefore be a header. This patch moves the code to generic hid layer as .c source, and introduces CONFIG_HID_DEBUG to conditionally compile it, instead of playing with #define DEBUG and including hid-debug.h. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-01-25 10:43:31 +00:00
}
HID: use debugfs for events/reports dumping This is a followup patch to the one implemeting rdesc representation in debugfs rather than being dependent on compile-time CONFIG_HID_DEBUG setting. The API of the appropriate formatting functions is slightly modified -- if they are passed seq_file pointer, the one-shot output for 'rdesc' file mode is used, and therefore the message is formatted into the corresponding seq_file immediately. Otherwise the called function allocated a new buffer, formats the text into the buffer and returns the pointer to it, so that it can be queued into the ring-buffer of the processess blocked waiting on input on 'events' file in debugfs. 'debug' parameter to the 'hid' module is now used solely for the prupose of inetrnal driver state debugging (parser, transport, etc). Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-06-12 13:20:57 +00:00
char *hid_resolv_usage(unsigned usage, struct seq_file *f) {
HID: hid debug from hid-debug.h to hid layer hid-debug.h contains a lot of code, and should not therefore be a header. This patch moves the code to generic hid layer as .c source, and introduces CONFIG_HID_DEBUG to conditionally compile it, instead of playing with #define DEBUG and including hid-debug.h. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-01-25 10:43:31 +00:00
const struct hid_usage_entry *p;
HID: use debugfs for events/reports dumping This is a followup patch to the one implemeting rdesc representation in debugfs rather than being dependent on compile-time CONFIG_HID_DEBUG setting. The API of the appropriate formatting functions is slightly modified -- if they are passed seq_file pointer, the one-shot output for 'rdesc' file mode is used, and therefore the message is formatted into the corresponding seq_file immediately. Otherwise the called function allocated a new buffer, formats the text into the buffer and returns the pointer to it, so that it can be queued into the ring-buffer of the processess blocked waiting on input on 'events' file in debugfs. 'debug' parameter to the 'hid' module is now used solely for the prupose of inetrnal driver state debugging (parser, transport, etc). Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-06-12 13:20:57 +00:00
char *buf = NULL;
int len = 0;
HID: hid debug from hid-debug.h to hid layer hid-debug.h contains a lot of code, and should not therefore be a header. This patch moves the code to generic hid layer as .c source, and introduces CONFIG_HID_DEBUG to conditionally compile it, instead of playing with #define DEBUG and including hid-debug.h. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-01-25 10:43:31 +00:00
HID: use debugfs for events/reports dumping This is a followup patch to the one implemeting rdesc representation in debugfs rather than being dependent on compile-time CONFIG_HID_DEBUG setting. The API of the appropriate formatting functions is slightly modified -- if they are passed seq_file pointer, the one-shot output for 'rdesc' file mode is used, and therefore the message is formatted into the corresponding seq_file immediately. Otherwise the called function allocated a new buffer, formats the text into the buffer and returns the pointer to it, so that it can be queued into the ring-buffer of the processess blocked waiting on input on 'events' file in debugfs. 'debug' parameter to the 'hid' module is now used solely for the prupose of inetrnal driver state debugging (parser, transport, etc). Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-06-12 13:20:57 +00:00
buf = resolv_usage_page(usage >> 16, f);
if (IS_ERR(buf)) {
printk(KERN_ERR "error allocating HID debug buffer\n");
return NULL;
}
HID: hid debug from hid-debug.h to hid layer hid-debug.h contains a lot of code, and should not therefore be a header. This patch moves the code to generic hid layer as .c source, and introduces CONFIG_HID_DEBUG to conditionally compile it, instead of playing with #define DEBUG and including hid-debug.h. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-01-25 10:43:31 +00:00
HID: make debugging output runtime-configurable There have been many reports recently about broken HID devices, the diagnosis of which required users to recompile their kernels in order to be able to provide debugging output needed for coding a quirk for a particular device. This patch makes CONFIG_HID_DEBUG default y if !EMBEDDED and makes it possible to control debugging output produced by HID code by supplying 'debug=1' module parameter. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-05-30 13:07:13 +00:00
HID: use debugfs for events/reports dumping This is a followup patch to the one implemeting rdesc representation in debugfs rather than being dependent on compile-time CONFIG_HID_DEBUG setting. The API of the appropriate formatting functions is slightly modified -- if they are passed seq_file pointer, the one-shot output for 'rdesc' file mode is used, and therefore the message is formatted into the corresponding seq_file immediately. Otherwise the called function allocated a new buffer, formats the text into the buffer and returns the pointer to it, so that it can be queued into the ring-buffer of the processess blocked waiting on input on 'events' file in debugfs. 'debug' parameter to the 'hid' module is now used solely for the prupose of inetrnal driver state debugging (parser, transport, etc). Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-06-12 13:20:57 +00:00
if (!f) {
len = strlen(buf);
snprintf(buf+len, max(0, HID_DEBUG_BUFSIZE - len), ".");
len++;
}
else {
HID: use debugfs for report dumping descriptor It is a little bit inconvenient for people who have some non-standard HID hardware (usually violating the HID specification) to have to recompile kernel with CONFIG_HID_DEBUG to be able to see kernel's perspective of the HID report descriptor and observe the parsed events. Plus the messages are then mixed up inconveniently with the rest of the dmesg stuff. This patch implements /sys/kernel/debug/hid/<device>/rdesc file, which represents the kernel's view of report descriptor (both the raw report descriptor data and parsed contents). With all the device-specific debug data being available through debugfs, there is no need for keeping CONFIG_HID_DEBUG, as the 'debug' parameter to the hid module will now only output only driver-specific debugging options, which has absolutely minimal memory footprint, just a few error messages and one global flag (hid_debug). We use the current set of output formatting functions. The ones that need to be used both for one-shot rdesc seq_file and also for continuous flow of data (individual reports, as being sent by the device) distinguish according to the passed seq_file parameter, and if it is NULL, it still output to kernel ringbuffer, otherwise the corresponding seq_file is used for output. The format of the output is preserved. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-06-12 13:20:55 +00:00
seq_printf(f, ".");
HID: use debugfs for events/reports dumping This is a followup patch to the one implemeting rdesc representation in debugfs rather than being dependent on compile-time CONFIG_HID_DEBUG setting. The API of the appropriate formatting functions is slightly modified -- if they are passed seq_file pointer, the one-shot output for 'rdesc' file mode is used, and therefore the message is formatted into the corresponding seq_file immediately. Otherwise the called function allocated a new buffer, formats the text into the buffer and returns the pointer to it, so that it can be queued into the ring-buffer of the processess blocked waiting on input on 'events' file in debugfs. 'debug' parameter to the 'hid' module is now used solely for the prupose of inetrnal driver state debugging (parser, transport, etc). Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-06-12 13:20:57 +00:00
}
HID: hid debug from hid-debug.h to hid layer hid-debug.h contains a lot of code, and should not therefore be a header. This patch moves the code to generic hid layer as .c source, and introduces CONFIG_HID_DEBUG to conditionally compile it, instead of playing with #define DEBUG and including hid-debug.h. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-01-25 10:43:31 +00:00
for (p = hid_usage_table; p->description; p++)
if (p->page == (usage >> 16)) {
for(++p; p->description && p->usage != 0; p++)
if (p->usage == (usage & 0xffff)) {
HID: use debugfs for report dumping descriptor It is a little bit inconvenient for people who have some non-standard HID hardware (usually violating the HID specification) to have to recompile kernel with CONFIG_HID_DEBUG to be able to see kernel's perspective of the HID report descriptor and observe the parsed events. Plus the messages are then mixed up inconveniently with the rest of the dmesg stuff. This patch implements /sys/kernel/debug/hid/<device>/rdesc file, which represents the kernel's view of report descriptor (both the raw report descriptor data and parsed contents). With all the device-specific debug data being available through debugfs, there is no need for keeping CONFIG_HID_DEBUG, as the 'debug' parameter to the hid module will now only output only driver-specific debugging options, which has absolutely minimal memory footprint, just a few error messages and one global flag (hid_debug). We use the current set of output formatting functions. The ones that need to be used both for one-shot rdesc seq_file and also for continuous flow of data (individual reports, as being sent by the device) distinguish according to the passed seq_file parameter, and if it is NULL, it still output to kernel ringbuffer, otherwise the corresponding seq_file is used for output. The format of the output is preserved. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-06-12 13:20:55 +00:00
if (!f)
HID: use debugfs for events/reports dumping This is a followup patch to the one implemeting rdesc representation in debugfs rather than being dependent on compile-time CONFIG_HID_DEBUG setting. The API of the appropriate formatting functions is slightly modified -- if they are passed seq_file pointer, the one-shot output for 'rdesc' file mode is used, and therefore the message is formatted into the corresponding seq_file immediately. Otherwise the called function allocated a new buffer, formats the text into the buffer and returns the pointer to it, so that it can be queued into the ring-buffer of the processess blocked waiting on input on 'events' file in debugfs. 'debug' parameter to the 'hid' module is now used solely for the prupose of inetrnal driver state debugging (parser, transport, etc). Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-06-12 13:20:57 +00:00
snprintf(buf + len,
max(0,HID_DEBUG_BUFSIZE - len - 1),
"%s", p->description);
HID: use debugfs for report dumping descriptor It is a little bit inconvenient for people who have some non-standard HID hardware (usually violating the HID specification) to have to recompile kernel with CONFIG_HID_DEBUG to be able to see kernel's perspective of the HID report descriptor and observe the parsed events. Plus the messages are then mixed up inconveniently with the rest of the dmesg stuff. This patch implements /sys/kernel/debug/hid/<device>/rdesc file, which represents the kernel's view of report descriptor (both the raw report descriptor data and parsed contents). With all the device-specific debug data being available through debugfs, there is no need for keeping CONFIG_HID_DEBUG, as the 'debug' parameter to the hid module will now only output only driver-specific debugging options, which has absolutely minimal memory footprint, just a few error messages and one global flag (hid_debug). We use the current set of output formatting functions. The ones that need to be used both for one-shot rdesc seq_file and also for continuous flow of data (individual reports, as being sent by the device) distinguish according to the passed seq_file parameter, and if it is NULL, it still output to kernel ringbuffer, otherwise the corresponding seq_file is used for output. The format of the output is preserved. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-06-12 13:20:55 +00:00
else
seq_printf(f,
"%s",
p->description);
HID: use debugfs for events/reports dumping This is a followup patch to the one implemeting rdesc representation in debugfs rather than being dependent on compile-time CONFIG_HID_DEBUG setting. The API of the appropriate formatting functions is slightly modified -- if they are passed seq_file pointer, the one-shot output for 'rdesc' file mode is used, and therefore the message is formatted into the corresponding seq_file immediately. Otherwise the called function allocated a new buffer, formats the text into the buffer and returns the pointer to it, so that it can be queued into the ring-buffer of the processess blocked waiting on input on 'events' file in debugfs. 'debug' parameter to the 'hid' module is now used solely for the prupose of inetrnal driver state debugging (parser, transport, etc). Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-06-12 13:20:57 +00:00
return buf;
HID: hid debug from hid-debug.h to hid layer hid-debug.h contains a lot of code, and should not therefore be a header. This patch moves the code to generic hid layer as .c source, and introduces CONFIG_HID_DEBUG to conditionally compile it, instead of playing with #define DEBUG and including hid-debug.h. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-01-25 10:43:31 +00:00
}
break;
}
HID: use debugfs for report dumping descriptor It is a little bit inconvenient for people who have some non-standard HID hardware (usually violating the HID specification) to have to recompile kernel with CONFIG_HID_DEBUG to be able to see kernel's perspective of the HID report descriptor and observe the parsed events. Plus the messages are then mixed up inconveniently with the rest of the dmesg stuff. This patch implements /sys/kernel/debug/hid/<device>/rdesc file, which represents the kernel's view of report descriptor (both the raw report descriptor data and parsed contents). With all the device-specific debug data being available through debugfs, there is no need for keeping CONFIG_HID_DEBUG, as the 'debug' parameter to the hid module will now only output only driver-specific debugging options, which has absolutely minimal memory footprint, just a few error messages and one global flag (hid_debug). We use the current set of output formatting functions. The ones that need to be used both for one-shot rdesc seq_file and also for continuous flow of data (individual reports, as being sent by the device) distinguish according to the passed seq_file parameter, and if it is NULL, it still output to kernel ringbuffer, otherwise the corresponding seq_file is used for output. The format of the output is preserved. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-06-12 13:20:55 +00:00
if (!f)
HID: use debugfs for events/reports dumping This is a followup patch to the one implemeting rdesc representation in debugfs rather than being dependent on compile-time CONFIG_HID_DEBUG setting. The API of the appropriate formatting functions is slightly modified -- if they are passed seq_file pointer, the one-shot output for 'rdesc' file mode is used, and therefore the message is formatted into the corresponding seq_file immediately. Otherwise the called function allocated a new buffer, formats the text into the buffer and returns the pointer to it, so that it can be queued into the ring-buffer of the processess blocked waiting on input on 'events' file in debugfs. 'debug' parameter to the 'hid' module is now used solely for the prupose of inetrnal driver state debugging (parser, transport, etc). Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-06-12 13:20:57 +00:00
snprintf(buf + len, max(0, HID_DEBUG_BUFSIZE - len - 1),
"%04x", usage & 0xffff);
HID: use debugfs for report dumping descriptor It is a little bit inconvenient for people who have some non-standard HID hardware (usually violating the HID specification) to have to recompile kernel with CONFIG_HID_DEBUG to be able to see kernel's perspective of the HID report descriptor and observe the parsed events. Plus the messages are then mixed up inconveniently with the rest of the dmesg stuff. This patch implements /sys/kernel/debug/hid/<device>/rdesc file, which represents the kernel's view of report descriptor (both the raw report descriptor data and parsed contents). With all the device-specific debug data being available through debugfs, there is no need for keeping CONFIG_HID_DEBUG, as the 'debug' parameter to the hid module will now only output only driver-specific debugging options, which has absolutely minimal memory footprint, just a few error messages and one global flag (hid_debug). We use the current set of output formatting functions. The ones that need to be used both for one-shot rdesc seq_file and also for continuous flow of data (individual reports, as being sent by the device) distinguish according to the passed seq_file parameter, and if it is NULL, it still output to kernel ringbuffer, otherwise the corresponding seq_file is used for output. The format of the output is preserved. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-06-12 13:20:55 +00:00
else
seq_printf(f, "%04x", usage & 0xffff);
HID: use debugfs for events/reports dumping This is a followup patch to the one implemeting rdesc representation in debugfs rather than being dependent on compile-time CONFIG_HID_DEBUG setting. The API of the appropriate formatting functions is slightly modified -- if they are passed seq_file pointer, the one-shot output for 'rdesc' file mode is used, and therefore the message is formatted into the corresponding seq_file immediately. Otherwise the called function allocated a new buffer, formats the text into the buffer and returns the pointer to it, so that it can be queued into the ring-buffer of the processess blocked waiting on input on 'events' file in debugfs. 'debug' parameter to the 'hid' module is now used solely for the prupose of inetrnal driver state debugging (parser, transport, etc). Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-06-12 13:20:57 +00:00
return buf;
HID: hid debug from hid-debug.h to hid layer hid-debug.h contains a lot of code, and should not therefore be a header. This patch moves the code to generic hid layer as .c source, and introduces CONFIG_HID_DEBUG to conditionally compile it, instead of playing with #define DEBUG and including hid-debug.h. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-01-25 10:43:31 +00:00
}
EXPORT_SYMBOL_GPL(hid_resolv_usage);
HID: use debugfs for report dumping descriptor It is a little bit inconvenient for people who have some non-standard HID hardware (usually violating the HID specification) to have to recompile kernel with CONFIG_HID_DEBUG to be able to see kernel's perspective of the HID report descriptor and observe the parsed events. Plus the messages are then mixed up inconveniently with the rest of the dmesg stuff. This patch implements /sys/kernel/debug/hid/<device>/rdesc file, which represents the kernel's view of report descriptor (both the raw report descriptor data and parsed contents). With all the device-specific debug data being available through debugfs, there is no need for keeping CONFIG_HID_DEBUG, as the 'debug' parameter to the hid module will now only output only driver-specific debugging options, which has absolutely minimal memory footprint, just a few error messages and one global flag (hid_debug). We use the current set of output formatting functions. The ones that need to be used both for one-shot rdesc seq_file and also for continuous flow of data (individual reports, as being sent by the device) distinguish according to the passed seq_file parameter, and if it is NULL, it still output to kernel ringbuffer, otherwise the corresponding seq_file is used for output. The format of the output is preserved. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-06-12 13:20:55 +00:00
static void tab(int n, struct seq_file *f) {
seq_printf(f, "%*s", n, "");
HID: hid debug from hid-debug.h to hid layer hid-debug.h contains a lot of code, and should not therefore be a header. This patch moves the code to generic hid layer as .c source, and introduces CONFIG_HID_DEBUG to conditionally compile it, instead of playing with #define DEBUG and including hid-debug.h. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-01-25 10:43:31 +00:00
}
HID: use debugfs for report dumping descriptor It is a little bit inconvenient for people who have some non-standard HID hardware (usually violating the HID specification) to have to recompile kernel with CONFIG_HID_DEBUG to be able to see kernel's perspective of the HID report descriptor and observe the parsed events. Plus the messages are then mixed up inconveniently with the rest of the dmesg stuff. This patch implements /sys/kernel/debug/hid/<device>/rdesc file, which represents the kernel's view of report descriptor (both the raw report descriptor data and parsed contents). With all the device-specific debug data being available through debugfs, there is no need for keeping CONFIG_HID_DEBUG, as the 'debug' parameter to the hid module will now only output only driver-specific debugging options, which has absolutely minimal memory footprint, just a few error messages and one global flag (hid_debug). We use the current set of output formatting functions. The ones that need to be used both for one-shot rdesc seq_file and also for continuous flow of data (individual reports, as being sent by the device) distinguish according to the passed seq_file parameter, and if it is NULL, it still output to kernel ringbuffer, otherwise the corresponding seq_file is used for output. The format of the output is preserved. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-06-12 13:20:55 +00:00
void hid_dump_field(struct hid_field *field, int n, struct seq_file *f) {
HID: hid debug from hid-debug.h to hid layer hid-debug.h contains a lot of code, and should not therefore be a header. This patch moves the code to generic hid layer as .c source, and introduces CONFIG_HID_DEBUG to conditionally compile it, instead of playing with #define DEBUG and including hid-debug.h. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-01-25 10:43:31 +00:00
int j;
if (field->physical) {
HID: use debugfs for report dumping descriptor It is a little bit inconvenient for people who have some non-standard HID hardware (usually violating the HID specification) to have to recompile kernel with CONFIG_HID_DEBUG to be able to see kernel's perspective of the HID report descriptor and observe the parsed events. Plus the messages are then mixed up inconveniently with the rest of the dmesg stuff. This patch implements /sys/kernel/debug/hid/<device>/rdesc file, which represents the kernel's view of report descriptor (both the raw report descriptor data and parsed contents). With all the device-specific debug data being available through debugfs, there is no need for keeping CONFIG_HID_DEBUG, as the 'debug' parameter to the hid module will now only output only driver-specific debugging options, which has absolutely minimal memory footprint, just a few error messages and one global flag (hid_debug). We use the current set of output formatting functions. The ones that need to be used both for one-shot rdesc seq_file and also for continuous flow of data (individual reports, as being sent by the device) distinguish according to the passed seq_file parameter, and if it is NULL, it still output to kernel ringbuffer, otherwise the corresponding seq_file is used for output. The format of the output is preserved. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-06-12 13:20:55 +00:00
tab(n, f);
seq_printf(f, "Physical(");
hid_resolv_usage(field->physical, f); seq_printf(f, ")\n");
HID: hid debug from hid-debug.h to hid layer hid-debug.h contains a lot of code, and should not therefore be a header. This patch moves the code to generic hid layer as .c source, and introduces CONFIG_HID_DEBUG to conditionally compile it, instead of playing with #define DEBUG and including hid-debug.h. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-01-25 10:43:31 +00:00
}
if (field->logical) {
HID: use debugfs for report dumping descriptor It is a little bit inconvenient for people who have some non-standard HID hardware (usually violating the HID specification) to have to recompile kernel with CONFIG_HID_DEBUG to be able to see kernel's perspective of the HID report descriptor and observe the parsed events. Plus the messages are then mixed up inconveniently with the rest of the dmesg stuff. This patch implements /sys/kernel/debug/hid/<device>/rdesc file, which represents the kernel's view of report descriptor (both the raw report descriptor data and parsed contents). With all the device-specific debug data being available through debugfs, there is no need for keeping CONFIG_HID_DEBUG, as the 'debug' parameter to the hid module will now only output only driver-specific debugging options, which has absolutely minimal memory footprint, just a few error messages and one global flag (hid_debug). We use the current set of output formatting functions. The ones that need to be used both for one-shot rdesc seq_file and also for continuous flow of data (individual reports, as being sent by the device) distinguish according to the passed seq_file parameter, and if it is NULL, it still output to kernel ringbuffer, otherwise the corresponding seq_file is used for output. The format of the output is preserved. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-06-12 13:20:55 +00:00
tab(n, f);
seq_printf(f, "Logical(");
hid_resolv_usage(field->logical, f); seq_printf(f, ")\n");
HID: hid debug from hid-debug.h to hid layer hid-debug.h contains a lot of code, and should not therefore be a header. This patch moves the code to generic hid layer as .c source, and introduces CONFIG_HID_DEBUG to conditionally compile it, instead of playing with #define DEBUG and including hid-debug.h. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-01-25 10:43:31 +00:00
}
HID: use debugfs for report dumping descriptor It is a little bit inconvenient for people who have some non-standard HID hardware (usually violating the HID specification) to have to recompile kernel with CONFIG_HID_DEBUG to be able to see kernel's perspective of the HID report descriptor and observe the parsed events. Plus the messages are then mixed up inconveniently with the rest of the dmesg stuff. This patch implements /sys/kernel/debug/hid/<device>/rdesc file, which represents the kernel's view of report descriptor (both the raw report descriptor data and parsed contents). With all the device-specific debug data being available through debugfs, there is no need for keeping CONFIG_HID_DEBUG, as the 'debug' parameter to the hid module will now only output only driver-specific debugging options, which has absolutely minimal memory footprint, just a few error messages and one global flag (hid_debug). We use the current set of output formatting functions. The ones that need to be used both for one-shot rdesc seq_file and also for continuous flow of data (individual reports, as being sent by the device) distinguish according to the passed seq_file parameter, and if it is NULL, it still output to kernel ringbuffer, otherwise the corresponding seq_file is used for output. The format of the output is preserved. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-06-12 13:20:55 +00:00
tab(n, f); seq_printf(f, "Usage(%d)\n", field->maxusage);
HID: hid debug from hid-debug.h to hid layer hid-debug.h contains a lot of code, and should not therefore be a header. This patch moves the code to generic hid layer as .c source, and introduces CONFIG_HID_DEBUG to conditionally compile it, instead of playing with #define DEBUG and including hid-debug.h. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-01-25 10:43:31 +00:00
for (j = 0; j < field->maxusage; j++) {
HID: use debugfs for report dumping descriptor It is a little bit inconvenient for people who have some non-standard HID hardware (usually violating the HID specification) to have to recompile kernel with CONFIG_HID_DEBUG to be able to see kernel's perspective of the HID report descriptor and observe the parsed events. Plus the messages are then mixed up inconveniently with the rest of the dmesg stuff. This patch implements /sys/kernel/debug/hid/<device>/rdesc file, which represents the kernel's view of report descriptor (both the raw report descriptor data and parsed contents). With all the device-specific debug data being available through debugfs, there is no need for keeping CONFIG_HID_DEBUG, as the 'debug' parameter to the hid module will now only output only driver-specific debugging options, which has absolutely minimal memory footprint, just a few error messages and one global flag (hid_debug). We use the current set of output formatting functions. The ones that need to be used both for one-shot rdesc seq_file and also for continuous flow of data (individual reports, as being sent by the device) distinguish according to the passed seq_file parameter, and if it is NULL, it still output to kernel ringbuffer, otherwise the corresponding seq_file is used for output. The format of the output is preserved. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-06-12 13:20:55 +00:00
tab(n+2, f); hid_resolv_usage(field->usage[j].hid, f); seq_printf(f, "\n");
HID: hid debug from hid-debug.h to hid layer hid-debug.h contains a lot of code, and should not therefore be a header. This patch moves the code to generic hid layer as .c source, and introduces CONFIG_HID_DEBUG to conditionally compile it, instead of playing with #define DEBUG and including hid-debug.h. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-01-25 10:43:31 +00:00
}
if (field->logical_minimum != field->logical_maximum) {
HID: use debugfs for report dumping descriptor It is a little bit inconvenient for people who have some non-standard HID hardware (usually violating the HID specification) to have to recompile kernel with CONFIG_HID_DEBUG to be able to see kernel's perspective of the HID report descriptor and observe the parsed events. Plus the messages are then mixed up inconveniently with the rest of the dmesg stuff. This patch implements /sys/kernel/debug/hid/<device>/rdesc file, which represents the kernel's view of report descriptor (both the raw report descriptor data and parsed contents). With all the device-specific debug data being available through debugfs, there is no need for keeping CONFIG_HID_DEBUG, as the 'debug' parameter to the hid module will now only output only driver-specific debugging options, which has absolutely minimal memory footprint, just a few error messages and one global flag (hid_debug). We use the current set of output formatting functions. The ones that need to be used both for one-shot rdesc seq_file and also for continuous flow of data (individual reports, as being sent by the device) distinguish according to the passed seq_file parameter, and if it is NULL, it still output to kernel ringbuffer, otherwise the corresponding seq_file is used for output. The format of the output is preserved. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-06-12 13:20:55 +00:00
tab(n, f); seq_printf(f, "Logical Minimum(%d)\n", field->logical_minimum);
tab(n, f); seq_printf(f, "Logical Maximum(%d)\n", field->logical_maximum);
HID: hid debug from hid-debug.h to hid layer hid-debug.h contains a lot of code, and should not therefore be a header. This patch moves the code to generic hid layer as .c source, and introduces CONFIG_HID_DEBUG to conditionally compile it, instead of playing with #define DEBUG and including hid-debug.h. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-01-25 10:43:31 +00:00
}
if (field->physical_minimum != field->physical_maximum) {
HID: use debugfs for report dumping descriptor It is a little bit inconvenient for people who have some non-standard HID hardware (usually violating the HID specification) to have to recompile kernel with CONFIG_HID_DEBUG to be able to see kernel's perspective of the HID report descriptor and observe the parsed events. Plus the messages are then mixed up inconveniently with the rest of the dmesg stuff. This patch implements /sys/kernel/debug/hid/<device>/rdesc file, which represents the kernel's view of report descriptor (both the raw report descriptor data and parsed contents). With all the device-specific debug data being available through debugfs, there is no need for keeping CONFIG_HID_DEBUG, as the 'debug' parameter to the hid module will now only output only driver-specific debugging options, which has absolutely minimal memory footprint, just a few error messages and one global flag (hid_debug). We use the current set of output formatting functions. The ones that need to be used both for one-shot rdesc seq_file and also for continuous flow of data (individual reports, as being sent by the device) distinguish according to the passed seq_file parameter, and if it is NULL, it still output to kernel ringbuffer, otherwise the corresponding seq_file is used for output. The format of the output is preserved. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-06-12 13:20:55 +00:00
tab(n, f); seq_printf(f, "Physical Minimum(%d)\n", field->physical_minimum);
tab(n, f); seq_printf(f, "Physical Maximum(%d)\n", field->physical_maximum);
HID: hid debug from hid-debug.h to hid layer hid-debug.h contains a lot of code, and should not therefore be a header. This patch moves the code to generic hid layer as .c source, and introduces CONFIG_HID_DEBUG to conditionally compile it, instead of playing with #define DEBUG and including hid-debug.h. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-01-25 10:43:31 +00:00
}
if (field->unit_exponent) {
HID: use debugfs for report dumping descriptor It is a little bit inconvenient for people who have some non-standard HID hardware (usually violating the HID specification) to have to recompile kernel with CONFIG_HID_DEBUG to be able to see kernel's perspective of the HID report descriptor and observe the parsed events. Plus the messages are then mixed up inconveniently with the rest of the dmesg stuff. This patch implements /sys/kernel/debug/hid/<device>/rdesc file, which represents the kernel's view of report descriptor (both the raw report descriptor data and parsed contents). With all the device-specific debug data being available through debugfs, there is no need for keeping CONFIG_HID_DEBUG, as the 'debug' parameter to the hid module will now only output only driver-specific debugging options, which has absolutely minimal memory footprint, just a few error messages and one global flag (hid_debug). We use the current set of output formatting functions. The ones that need to be used both for one-shot rdesc seq_file and also for continuous flow of data (individual reports, as being sent by the device) distinguish according to the passed seq_file parameter, and if it is NULL, it still output to kernel ringbuffer, otherwise the corresponding seq_file is used for output. The format of the output is preserved. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-06-12 13:20:55 +00:00
tab(n, f); seq_printf(f, "Unit Exponent(%d)\n", field->unit_exponent);
HID: hid debug from hid-debug.h to hid layer hid-debug.h contains a lot of code, and should not therefore be a header. This patch moves the code to generic hid layer as .c source, and introduces CONFIG_HID_DEBUG to conditionally compile it, instead of playing with #define DEBUG and including hid-debug.h. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-01-25 10:43:31 +00:00
}
if (field->unit) {
HID: trivial fixes in hid-debug - added KERN_DEBUG to output lines - fixed preffered -> preferred typo - added const to char *'s Also, exported symbol hid_resolv_event is unused by the current kernel tree and perhaps should be removed. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-09-26 14:29:53 +00:00
static const char *systems[5] = { "None", "SI Linear", "SI Rotation", "English Linear", "English Rotation" };
static const char *units[5][8] = {
HID: hid debug from hid-debug.h to hid layer hid-debug.h contains a lot of code, and should not therefore be a header. This patch moves the code to generic hid layer as .c source, and introduces CONFIG_HID_DEBUG to conditionally compile it, instead of playing with #define DEBUG and including hid-debug.h. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-01-25 10:43:31 +00:00
{ "None", "None", "None", "None", "None", "None", "None", "None" },
{ "None", "Centimeter", "Gram", "Seconds", "Kelvin", "Ampere", "Candela", "None" },
{ "None", "Radians", "Gram", "Seconds", "Kelvin", "Ampere", "Candela", "None" },
{ "None", "Inch", "Slug", "Seconds", "Fahrenheit", "Ampere", "Candela", "None" },
{ "None", "Degrees", "Slug", "Seconds", "Fahrenheit", "Ampere", "Candela", "None" }
};
int i;
int sys;
__u32 data = field->unit;
/* First nibble tells us which system we're in. */
sys = data & 0xf;
data >>= 4;
if(sys > 4) {
HID: use debugfs for report dumping descriptor It is a little bit inconvenient for people who have some non-standard HID hardware (usually violating the HID specification) to have to recompile kernel with CONFIG_HID_DEBUG to be able to see kernel's perspective of the HID report descriptor and observe the parsed events. Plus the messages are then mixed up inconveniently with the rest of the dmesg stuff. This patch implements /sys/kernel/debug/hid/<device>/rdesc file, which represents the kernel's view of report descriptor (both the raw report descriptor data and parsed contents). With all the device-specific debug data being available through debugfs, there is no need for keeping CONFIG_HID_DEBUG, as the 'debug' parameter to the hid module will now only output only driver-specific debugging options, which has absolutely minimal memory footprint, just a few error messages and one global flag (hid_debug). We use the current set of output formatting functions. The ones that need to be used both for one-shot rdesc seq_file and also for continuous flow of data (individual reports, as being sent by the device) distinguish according to the passed seq_file parameter, and if it is NULL, it still output to kernel ringbuffer, otherwise the corresponding seq_file is used for output. The format of the output is preserved. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-06-12 13:20:55 +00:00
tab(n, f); seq_printf(f, "Unit(Invalid)\n");
HID: hid debug from hid-debug.h to hid layer hid-debug.h contains a lot of code, and should not therefore be a header. This patch moves the code to generic hid layer as .c source, and introduces CONFIG_HID_DEBUG to conditionally compile it, instead of playing with #define DEBUG and including hid-debug.h. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-01-25 10:43:31 +00:00
}
else {
int earlier_unit = 0;
HID: use debugfs for report dumping descriptor It is a little bit inconvenient for people who have some non-standard HID hardware (usually violating the HID specification) to have to recompile kernel with CONFIG_HID_DEBUG to be able to see kernel's perspective of the HID report descriptor and observe the parsed events. Plus the messages are then mixed up inconveniently with the rest of the dmesg stuff. This patch implements /sys/kernel/debug/hid/<device>/rdesc file, which represents the kernel's view of report descriptor (both the raw report descriptor data and parsed contents). With all the device-specific debug data being available through debugfs, there is no need for keeping CONFIG_HID_DEBUG, as the 'debug' parameter to the hid module will now only output only driver-specific debugging options, which has absolutely minimal memory footprint, just a few error messages and one global flag (hid_debug). We use the current set of output formatting functions. The ones that need to be used both for one-shot rdesc seq_file and also for continuous flow of data (individual reports, as being sent by the device) distinguish according to the passed seq_file parameter, and if it is NULL, it still output to kernel ringbuffer, otherwise the corresponding seq_file is used for output. The format of the output is preserved. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-06-12 13:20:55 +00:00
tab(n, f); seq_printf(f, "Unit(%s : ", systems[sys]);
HID: hid debug from hid-debug.h to hid layer hid-debug.h contains a lot of code, and should not therefore be a header. This patch moves the code to generic hid layer as .c source, and introduces CONFIG_HID_DEBUG to conditionally compile it, instead of playing with #define DEBUG and including hid-debug.h. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-01-25 10:43:31 +00:00
for (i=1 ; i<sizeof(__u32)*2 ; i++) {
char nibble = data & 0xf;
data >>= 4;
if (nibble != 0) {
if(earlier_unit++ > 0)
HID: use debugfs for report dumping descriptor It is a little bit inconvenient for people who have some non-standard HID hardware (usually violating the HID specification) to have to recompile kernel with CONFIG_HID_DEBUG to be able to see kernel's perspective of the HID report descriptor and observe the parsed events. Plus the messages are then mixed up inconveniently with the rest of the dmesg stuff. This patch implements /sys/kernel/debug/hid/<device>/rdesc file, which represents the kernel's view of report descriptor (both the raw report descriptor data and parsed contents). With all the device-specific debug data being available through debugfs, there is no need for keeping CONFIG_HID_DEBUG, as the 'debug' parameter to the hid module will now only output only driver-specific debugging options, which has absolutely minimal memory footprint, just a few error messages and one global flag (hid_debug). We use the current set of output formatting functions. The ones that need to be used both for one-shot rdesc seq_file and also for continuous flow of data (individual reports, as being sent by the device) distinguish according to the passed seq_file parameter, and if it is NULL, it still output to kernel ringbuffer, otherwise the corresponding seq_file is used for output. The format of the output is preserved. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-06-12 13:20:55 +00:00
seq_printf(f, "*");
seq_printf(f, "%s", units[sys][i]);
HID: hid debug from hid-debug.h to hid layer hid-debug.h contains a lot of code, and should not therefore be a header. This patch moves the code to generic hid layer as .c source, and introduces CONFIG_HID_DEBUG to conditionally compile it, instead of playing with #define DEBUG and including hid-debug.h. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-01-25 10:43:31 +00:00
if(nibble != 1) {
/* This is a _signed_ nibble(!) */
int val = nibble & 0x7;
if(nibble & 0x08)
val = -((0x7 & ~val) +1);
HID: use debugfs for report dumping descriptor It is a little bit inconvenient for people who have some non-standard HID hardware (usually violating the HID specification) to have to recompile kernel with CONFIG_HID_DEBUG to be able to see kernel's perspective of the HID report descriptor and observe the parsed events. Plus the messages are then mixed up inconveniently with the rest of the dmesg stuff. This patch implements /sys/kernel/debug/hid/<device>/rdesc file, which represents the kernel's view of report descriptor (both the raw report descriptor data and parsed contents). With all the device-specific debug data being available through debugfs, there is no need for keeping CONFIG_HID_DEBUG, as the 'debug' parameter to the hid module will now only output only driver-specific debugging options, which has absolutely minimal memory footprint, just a few error messages and one global flag (hid_debug). We use the current set of output formatting functions. The ones that need to be used both for one-shot rdesc seq_file and also for continuous flow of data (individual reports, as being sent by the device) distinguish according to the passed seq_file parameter, and if it is NULL, it still output to kernel ringbuffer, otherwise the corresponding seq_file is used for output. The format of the output is preserved. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-06-12 13:20:55 +00:00
seq_printf(f, "^%d", val);
HID: hid debug from hid-debug.h to hid layer hid-debug.h contains a lot of code, and should not therefore be a header. This patch moves the code to generic hid layer as .c source, and introduces CONFIG_HID_DEBUG to conditionally compile it, instead of playing with #define DEBUG and including hid-debug.h. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-01-25 10:43:31 +00:00
}
}
}
HID: use debugfs for report dumping descriptor It is a little bit inconvenient for people who have some non-standard HID hardware (usually violating the HID specification) to have to recompile kernel with CONFIG_HID_DEBUG to be able to see kernel's perspective of the HID report descriptor and observe the parsed events. Plus the messages are then mixed up inconveniently with the rest of the dmesg stuff. This patch implements /sys/kernel/debug/hid/<device>/rdesc file, which represents the kernel's view of report descriptor (both the raw report descriptor data and parsed contents). With all the device-specific debug data being available through debugfs, there is no need for keeping CONFIG_HID_DEBUG, as the 'debug' parameter to the hid module will now only output only driver-specific debugging options, which has absolutely minimal memory footprint, just a few error messages and one global flag (hid_debug). We use the current set of output formatting functions. The ones that need to be used both for one-shot rdesc seq_file and also for continuous flow of data (individual reports, as being sent by the device) distinguish according to the passed seq_file parameter, and if it is NULL, it still output to kernel ringbuffer, otherwise the corresponding seq_file is used for output. The format of the output is preserved. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-06-12 13:20:55 +00:00
seq_printf(f, ")\n");
HID: hid debug from hid-debug.h to hid layer hid-debug.h contains a lot of code, and should not therefore be a header. This patch moves the code to generic hid layer as .c source, and introduces CONFIG_HID_DEBUG to conditionally compile it, instead of playing with #define DEBUG and including hid-debug.h. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-01-25 10:43:31 +00:00
}
}
HID: use debugfs for report dumping descriptor It is a little bit inconvenient for people who have some non-standard HID hardware (usually violating the HID specification) to have to recompile kernel with CONFIG_HID_DEBUG to be able to see kernel's perspective of the HID report descriptor and observe the parsed events. Plus the messages are then mixed up inconveniently with the rest of the dmesg stuff. This patch implements /sys/kernel/debug/hid/<device>/rdesc file, which represents the kernel's view of report descriptor (both the raw report descriptor data and parsed contents). With all the device-specific debug data being available through debugfs, there is no need for keeping CONFIG_HID_DEBUG, as the 'debug' parameter to the hid module will now only output only driver-specific debugging options, which has absolutely minimal memory footprint, just a few error messages and one global flag (hid_debug). We use the current set of output formatting functions. The ones that need to be used both for one-shot rdesc seq_file and also for continuous flow of data (individual reports, as being sent by the device) distinguish according to the passed seq_file parameter, and if it is NULL, it still output to kernel ringbuffer, otherwise the corresponding seq_file is used for output. The format of the output is preserved. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-06-12 13:20:55 +00:00
tab(n, f); seq_printf(f, "Report Size(%u)\n", field->report_size);
tab(n, f); seq_printf(f, "Report Count(%u)\n", field->report_count);
tab(n, f); seq_printf(f, "Report Offset(%u)\n", field->report_offset);
HID: hid debug from hid-debug.h to hid layer hid-debug.h contains a lot of code, and should not therefore be a header. This patch moves the code to generic hid layer as .c source, and introduces CONFIG_HID_DEBUG to conditionally compile it, instead of playing with #define DEBUG and including hid-debug.h. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-01-25 10:43:31 +00:00
HID: use debugfs for report dumping descriptor It is a little bit inconvenient for people who have some non-standard HID hardware (usually violating the HID specification) to have to recompile kernel with CONFIG_HID_DEBUG to be able to see kernel's perspective of the HID report descriptor and observe the parsed events. Plus the messages are then mixed up inconveniently with the rest of the dmesg stuff. This patch implements /sys/kernel/debug/hid/<device>/rdesc file, which represents the kernel's view of report descriptor (both the raw report descriptor data and parsed contents). With all the device-specific debug data being available through debugfs, there is no need for keeping CONFIG_HID_DEBUG, as the 'debug' parameter to the hid module will now only output only driver-specific debugging options, which has absolutely minimal memory footprint, just a few error messages and one global flag (hid_debug). We use the current set of output formatting functions. The ones that need to be used both for one-shot rdesc seq_file and also for continuous flow of data (individual reports, as being sent by the device) distinguish according to the passed seq_file parameter, and if it is NULL, it still output to kernel ringbuffer, otherwise the corresponding seq_file is used for output. The format of the output is preserved. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-06-12 13:20:55 +00:00
tab(n, f); seq_printf(f, "Flags( ");
HID: hid debug from hid-debug.h to hid layer hid-debug.h contains a lot of code, and should not therefore be a header. This patch moves the code to generic hid layer as .c source, and introduces CONFIG_HID_DEBUG to conditionally compile it, instead of playing with #define DEBUG and including hid-debug.h. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-01-25 10:43:31 +00:00
j = field->flags;
HID: use debugfs for report dumping descriptor It is a little bit inconvenient for people who have some non-standard HID hardware (usually violating the HID specification) to have to recompile kernel with CONFIG_HID_DEBUG to be able to see kernel's perspective of the HID report descriptor and observe the parsed events. Plus the messages are then mixed up inconveniently with the rest of the dmesg stuff. This patch implements /sys/kernel/debug/hid/<device>/rdesc file, which represents the kernel's view of report descriptor (both the raw report descriptor data and parsed contents). With all the device-specific debug data being available through debugfs, there is no need for keeping CONFIG_HID_DEBUG, as the 'debug' parameter to the hid module will now only output only driver-specific debugging options, which has absolutely minimal memory footprint, just a few error messages and one global flag (hid_debug). We use the current set of output formatting functions. The ones that need to be used both for one-shot rdesc seq_file and also for continuous flow of data (individual reports, as being sent by the device) distinguish according to the passed seq_file parameter, and if it is NULL, it still output to kernel ringbuffer, otherwise the corresponding seq_file is used for output. The format of the output is preserved. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-06-12 13:20:55 +00:00
seq_printf(f, "%s", HID_MAIN_ITEM_CONSTANT & j ? "Constant " : "");
seq_printf(f, "%s", HID_MAIN_ITEM_VARIABLE & j ? "Variable " : "Array ");
seq_printf(f, "%s", HID_MAIN_ITEM_RELATIVE & j ? "Relative " : "Absolute ");
seq_printf(f, "%s", HID_MAIN_ITEM_WRAP & j ? "Wrap " : "");
seq_printf(f, "%s", HID_MAIN_ITEM_NONLINEAR & j ? "NonLinear " : "");
seq_printf(f, "%s", HID_MAIN_ITEM_NO_PREFERRED & j ? "NoPreferredState " : "");
seq_printf(f, "%s", HID_MAIN_ITEM_NULL_STATE & j ? "NullState " : "");
seq_printf(f, "%s", HID_MAIN_ITEM_VOLATILE & j ? "Volatile " : "");
seq_printf(f, "%s", HID_MAIN_ITEM_BUFFERED_BYTE & j ? "BufferedByte " : "");
seq_printf(f, ")\n");
HID: hid debug from hid-debug.h to hid layer hid-debug.h contains a lot of code, and should not therefore be a header. This patch moves the code to generic hid layer as .c source, and introduces CONFIG_HID_DEBUG to conditionally compile it, instead of playing with #define DEBUG and including hid-debug.h. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-01-25 10:43:31 +00:00
}
EXPORT_SYMBOL_GPL(hid_dump_field);
HID: use debugfs for report dumping descriptor It is a little bit inconvenient for people who have some non-standard HID hardware (usually violating the HID specification) to have to recompile kernel with CONFIG_HID_DEBUG to be able to see kernel's perspective of the HID report descriptor and observe the parsed events. Plus the messages are then mixed up inconveniently with the rest of the dmesg stuff. This patch implements /sys/kernel/debug/hid/<device>/rdesc file, which represents the kernel's view of report descriptor (both the raw report descriptor data and parsed contents). With all the device-specific debug data being available through debugfs, there is no need for keeping CONFIG_HID_DEBUG, as the 'debug' parameter to the hid module will now only output only driver-specific debugging options, which has absolutely minimal memory footprint, just a few error messages and one global flag (hid_debug). We use the current set of output formatting functions. The ones that need to be used both for one-shot rdesc seq_file and also for continuous flow of data (individual reports, as being sent by the device) distinguish according to the passed seq_file parameter, and if it is NULL, it still output to kernel ringbuffer, otherwise the corresponding seq_file is used for output. The format of the output is preserved. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-06-12 13:20:55 +00:00
void hid_dump_device(struct hid_device *device, struct seq_file *f)
{
HID: hid debug from hid-debug.h to hid layer hid-debug.h contains a lot of code, and should not therefore be a header. This patch moves the code to generic hid layer as .c source, and introduces CONFIG_HID_DEBUG to conditionally compile it, instead of playing with #define DEBUG and including hid-debug.h. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-01-25 10:43:31 +00:00
struct hid_report_enum *report_enum;
struct hid_report *report;
struct list_head *list;
unsigned i,k;
HID: trivial fixes in hid-debug - added KERN_DEBUG to output lines - fixed preffered -> preferred typo - added const to char *'s Also, exported symbol hid_resolv_event is unused by the current kernel tree and perhaps should be removed. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-09-26 14:29:53 +00:00
static const char *table[] = {"INPUT", "OUTPUT", "FEATURE"};
HID: hid debug from hid-debug.h to hid layer hid-debug.h contains a lot of code, and should not therefore be a header. This patch moves the code to generic hid layer as .c source, and introduces CONFIG_HID_DEBUG to conditionally compile it, instead of playing with #define DEBUG and including hid-debug.h. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-01-25 10:43:31 +00:00
for (i = 0; i < HID_REPORT_TYPES; i++) {
report_enum = device->report_enum + i;
list = report_enum->report_list.next;
while (list != &report_enum->report_list) {
report = (struct hid_report *) list;
HID: use debugfs for report dumping descriptor It is a little bit inconvenient for people who have some non-standard HID hardware (usually violating the HID specification) to have to recompile kernel with CONFIG_HID_DEBUG to be able to see kernel's perspective of the HID report descriptor and observe the parsed events. Plus the messages are then mixed up inconveniently with the rest of the dmesg stuff. This patch implements /sys/kernel/debug/hid/<device>/rdesc file, which represents the kernel's view of report descriptor (both the raw report descriptor data and parsed contents). With all the device-specific debug data being available through debugfs, there is no need for keeping CONFIG_HID_DEBUG, as the 'debug' parameter to the hid module will now only output only driver-specific debugging options, which has absolutely minimal memory footprint, just a few error messages and one global flag (hid_debug). We use the current set of output formatting functions. The ones that need to be used both for one-shot rdesc seq_file and also for continuous flow of data (individual reports, as being sent by the device) distinguish according to the passed seq_file parameter, and if it is NULL, it still output to kernel ringbuffer, otherwise the corresponding seq_file is used for output. The format of the output is preserved. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-06-12 13:20:55 +00:00
tab(2, f);
seq_printf(f, "%s", table[i]);
HID: hid debug from hid-debug.h to hid layer hid-debug.h contains a lot of code, and should not therefore be a header. This patch moves the code to generic hid layer as .c source, and introduces CONFIG_HID_DEBUG to conditionally compile it, instead of playing with #define DEBUG and including hid-debug.h. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-01-25 10:43:31 +00:00
if (report->id)
HID: use debugfs for report dumping descriptor It is a little bit inconvenient for people who have some non-standard HID hardware (usually violating the HID specification) to have to recompile kernel with CONFIG_HID_DEBUG to be able to see kernel's perspective of the HID report descriptor and observe the parsed events. Plus the messages are then mixed up inconveniently with the rest of the dmesg stuff. This patch implements /sys/kernel/debug/hid/<device>/rdesc file, which represents the kernel's view of report descriptor (both the raw report descriptor data and parsed contents). With all the device-specific debug data being available through debugfs, there is no need for keeping CONFIG_HID_DEBUG, as the 'debug' parameter to the hid module will now only output only driver-specific debugging options, which has absolutely minimal memory footprint, just a few error messages and one global flag (hid_debug). We use the current set of output formatting functions. The ones that need to be used both for one-shot rdesc seq_file and also for continuous flow of data (individual reports, as being sent by the device) distinguish according to the passed seq_file parameter, and if it is NULL, it still output to kernel ringbuffer, otherwise the corresponding seq_file is used for output. The format of the output is preserved. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-06-12 13:20:55 +00:00
seq_printf(f, "(%d)", report->id);
seq_printf(f, "[%s]", table[report->type]);
seq_printf(f, "\n");
HID: hid debug from hid-debug.h to hid layer hid-debug.h contains a lot of code, and should not therefore be a header. This patch moves the code to generic hid layer as .c source, and introduces CONFIG_HID_DEBUG to conditionally compile it, instead of playing with #define DEBUG and including hid-debug.h. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-01-25 10:43:31 +00:00
for (k = 0; k < report->maxfield; k++) {
HID: use debugfs for report dumping descriptor It is a little bit inconvenient for people who have some non-standard HID hardware (usually violating the HID specification) to have to recompile kernel with CONFIG_HID_DEBUG to be able to see kernel's perspective of the HID report descriptor and observe the parsed events. Plus the messages are then mixed up inconveniently with the rest of the dmesg stuff. This patch implements /sys/kernel/debug/hid/<device>/rdesc file, which represents the kernel's view of report descriptor (both the raw report descriptor data and parsed contents). With all the device-specific debug data being available through debugfs, there is no need for keeping CONFIG_HID_DEBUG, as the 'debug' parameter to the hid module will now only output only driver-specific debugging options, which has absolutely minimal memory footprint, just a few error messages and one global flag (hid_debug). We use the current set of output formatting functions. The ones that need to be used both for one-shot rdesc seq_file and also for continuous flow of data (individual reports, as being sent by the device) distinguish according to the passed seq_file parameter, and if it is NULL, it still output to kernel ringbuffer, otherwise the corresponding seq_file is used for output. The format of the output is preserved. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-06-12 13:20:55 +00:00
tab(4, f);
seq_printf(f, "Field(%d)\n", k);
hid_dump_field(report->field[k], 6, f);
HID: hid debug from hid-debug.h to hid layer hid-debug.h contains a lot of code, and should not therefore be a header. This patch moves the code to generic hid layer as .c source, and introduces CONFIG_HID_DEBUG to conditionally compile it, instead of playing with #define DEBUG and including hid-debug.h. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-01-25 10:43:31 +00:00
}
list = list->next;
}
}
}
EXPORT_SYMBOL_GPL(hid_dump_device);
HID: use debugfs for events/reports dumping This is a followup patch to the one implemeting rdesc representation in debugfs rather than being dependent on compile-time CONFIG_HID_DEBUG setting. The API of the appropriate formatting functions is slightly modified -- if they are passed seq_file pointer, the one-shot output for 'rdesc' file mode is used, and therefore the message is formatted into the corresponding seq_file immediately. Otherwise the called function allocated a new buffer, formats the text into the buffer and returns the pointer to it, so that it can be queued into the ring-buffer of the processess blocked waiting on input on 'events' file in debugfs. 'debug' parameter to the 'hid' module is now used solely for the prupose of inetrnal driver state debugging (parser, transport, etc). Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-06-12 13:20:57 +00:00
/* enqueue string to 'events' ring buffer */
void hid_debug_event(struct hid_device *hdev, char *buf)
{
int i;
struct hid_debug_list *list;
list_for_each_entry(list, &hdev->debug_list, node) {
HID: avoid '\0' in hid debugfs events file When dumping /sys/kernel/debug/hid/$device/events '\0' characters show up (invisible if cat to console but shown by less or while looking at a dump file). These are due to hid_debug_event() adding strlen()+1 bytes to the ring buffer (e.g. including the trailing '\0'). Any roll-over causes a '\0' as well as hid_debug_event() handles the ring buffers with HID_DEBUG_BUFSIZE-1 size while hid_debug_events_read() handles it with full HID_DEBUG_BUFSIZE size. Signed-off-by: Bruno Prémont <bonbons@linux-vserver.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-03-15 18:00:27 +00:00
for (i = 0; i < strlen(buf); i++)
list->hid_debug_buf[(list->tail + i) % HID_DEBUG_BUFSIZE] =
HID: use debugfs for events/reports dumping This is a followup patch to the one implemeting rdesc representation in debugfs rather than being dependent on compile-time CONFIG_HID_DEBUG setting. The API of the appropriate formatting functions is slightly modified -- if they are passed seq_file pointer, the one-shot output for 'rdesc' file mode is used, and therefore the message is formatted into the corresponding seq_file immediately. Otherwise the called function allocated a new buffer, formats the text into the buffer and returns the pointer to it, so that it can be queued into the ring-buffer of the processess blocked waiting on input on 'events' file in debugfs. 'debug' parameter to the 'hid' module is now used solely for the prupose of inetrnal driver state debugging (parser, transport, etc). Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-06-12 13:20:57 +00:00
buf[i];
HID: avoid '\0' in hid debugfs events file When dumping /sys/kernel/debug/hid/$device/events '\0' characters show up (invisible if cat to console but shown by less or while looking at a dump file). These are due to hid_debug_event() adding strlen()+1 bytes to the ring buffer (e.g. including the trailing '\0'). Any roll-over causes a '\0' as well as hid_debug_event() handles the ring buffers with HID_DEBUG_BUFSIZE-1 size while hid_debug_events_read() handles it with full HID_DEBUG_BUFSIZE size. Signed-off-by: Bruno Prémont <bonbons@linux-vserver.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-03-15 18:00:27 +00:00
list->tail = (list->tail + i) % HID_DEBUG_BUFSIZE;
HID: use debugfs for events/reports dumping This is a followup patch to the one implemeting rdesc representation in debugfs rather than being dependent on compile-time CONFIG_HID_DEBUG setting. The API of the appropriate formatting functions is slightly modified -- if they are passed seq_file pointer, the one-shot output for 'rdesc' file mode is used, and therefore the message is formatted into the corresponding seq_file immediately. Otherwise the called function allocated a new buffer, formats the text into the buffer and returns the pointer to it, so that it can be queued into the ring-buffer of the processess blocked waiting on input on 'events' file in debugfs. 'debug' parameter to the 'hid' module is now used solely for the prupose of inetrnal driver state debugging (parser, transport, etc). Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-06-12 13:20:57 +00:00
}
}
EXPORT_SYMBOL_GPL(hid_debug_event);
void hid_dump_input(struct hid_device *hdev, struct hid_usage *usage, __s32 value)
{
char *buf;
int len;
buf = hid_resolv_usage(usage->hid, NULL);
if (!buf)
HID: make debugging output runtime-configurable There have been many reports recently about broken HID devices, the diagnosis of which required users to recompile their kernels in order to be able to provide debugging output needed for coding a quirk for a particular device. This patch makes CONFIG_HID_DEBUG default y if !EMBEDDED and makes it possible to control debugging output produced by HID code by supplying 'debug=1' module parameter. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-05-30 13:07:13 +00:00
return;
HID: use debugfs for events/reports dumping This is a followup patch to the one implemeting rdesc representation in debugfs rather than being dependent on compile-time CONFIG_HID_DEBUG setting. The API of the appropriate formatting functions is slightly modified -- if they are passed seq_file pointer, the one-shot output for 'rdesc' file mode is used, and therefore the message is formatted into the corresponding seq_file immediately. Otherwise the called function allocated a new buffer, formats the text into the buffer and returns the pointer to it, so that it can be queued into the ring-buffer of the processess blocked waiting on input on 'events' file in debugfs. 'debug' parameter to the 'hid' module is now used solely for the prupose of inetrnal driver state debugging (parser, transport, etc). Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-06-12 13:20:57 +00:00
len = strlen(buf);
snprintf(buf + len, HID_DEBUG_BUFSIZE - len - 1, " = %d\n", value);
hid_debug_event(hdev, buf);
kfree(buf);
wake_up_interruptible(&hdev->debug_wait);
HID: make debugging output runtime-configurable There have been many reports recently about broken HID devices, the diagnosis of which required users to recompile their kernels in order to be able to provide debugging output needed for coding a quirk for a particular device. This patch makes CONFIG_HID_DEBUG default y if !EMBEDDED and makes it possible to control debugging output produced by HID code by supplying 'debug=1' module parameter. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-05-30 13:07:13 +00:00
HID: hid debug from hid-debug.h to hid layer hid-debug.h contains a lot of code, and should not therefore be a header. This patch moves the code to generic hid layer as .c source, and introduces CONFIG_HID_DEBUG to conditionally compile it, instead of playing with #define DEBUG and including hid-debug.h. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-01-25 10:43:31 +00:00
}
EXPORT_SYMBOL_GPL(hid_dump_input);
HID: trivial fixes in hid-debug - added KERN_DEBUG to output lines - fixed preffered -> preferred typo - added const to char *'s Also, exported symbol hid_resolv_event is unused by the current kernel tree and perhaps should be removed. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-09-26 14:29:53 +00:00
static const char *events[EV_MAX + 1] = {
HID: hid debug from hid-debug.h to hid layer hid-debug.h contains a lot of code, and should not therefore be a header. This patch moves the code to generic hid layer as .c source, and introduces CONFIG_HID_DEBUG to conditionally compile it, instead of playing with #define DEBUG and including hid-debug.h. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-01-25 10:43:31 +00:00
[EV_SYN] = "Sync", [EV_KEY] = "Key",
[EV_REL] = "Relative", [EV_ABS] = "Absolute",
[EV_MSC] = "Misc", [EV_LED] = "LED",
[EV_SND] = "Sound", [EV_REP] = "Repeat",
[EV_FF] = "ForceFeedback", [EV_PWR] = "Power",
[EV_FF_STATUS] = "ForceFeedbackStatus",
};
HID: add new multitouch and digitizer contants Added constants to hid.h for all digitizer usages (including the new multitouch ones that are not yet in the official USB spec but are being pushed by Microsft as described in their paper "Digitizer Drivers for Windows Touch and Pen-Based Computers"). Updated hid-debug.c to support the new MT input constants such as ABS_MT_POSITION_X. Signed-off-by: Stephane Chatty <chatty@enac.fr> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-05-20 13:41:24 +00:00
static const char *syncs[3] = {
HID: hid debug from hid-debug.h to hid layer hid-debug.h contains a lot of code, and should not therefore be a header. This patch moves the code to generic hid layer as .c source, and introduces CONFIG_HID_DEBUG to conditionally compile it, instead of playing with #define DEBUG and including hid-debug.h. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-01-25 10:43:31 +00:00
[SYN_REPORT] = "Report", [SYN_CONFIG] = "Config",
HID: add new multitouch and digitizer contants Added constants to hid.h for all digitizer usages (including the new multitouch ones that are not yet in the official USB spec but are being pushed by Microsft as described in their paper "Digitizer Drivers for Windows Touch and Pen-Based Computers"). Updated hid-debug.c to support the new MT input constants such as ABS_MT_POSITION_X. Signed-off-by: Stephane Chatty <chatty@enac.fr> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-05-20 13:41:24 +00:00
[SYN_MT_REPORT] = "MT Report",
HID: hid debug from hid-debug.h to hid layer hid-debug.h contains a lot of code, and should not therefore be a header. This patch moves the code to generic hid layer as .c source, and introduces CONFIG_HID_DEBUG to conditionally compile it, instead of playing with #define DEBUG and including hid-debug.h. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-01-25 10:43:31 +00:00
};
HID: add new multitouch and digitizer contants Added constants to hid.h for all digitizer usages (including the new multitouch ones that are not yet in the official USB spec but are being pushed by Microsft as described in their paper "Digitizer Drivers for Windows Touch and Pen-Based Computers"). Updated hid-debug.c to support the new MT input constants such as ABS_MT_POSITION_X. Signed-off-by: Stephane Chatty <chatty@enac.fr> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-05-20 13:41:24 +00:00
HID: trivial fixes in hid-debug - added KERN_DEBUG to output lines - fixed preffered -> preferred typo - added const to char *'s Also, exported symbol hid_resolv_event is unused by the current kernel tree and perhaps should be removed. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-09-26 14:29:53 +00:00
static const char *keys[KEY_MAX + 1] = {
HID: hid debug from hid-debug.h to hid layer hid-debug.h contains a lot of code, and should not therefore be a header. This patch moves the code to generic hid layer as .c source, and introduces CONFIG_HID_DEBUG to conditionally compile it, instead of playing with #define DEBUG and including hid-debug.h. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-01-25 10:43:31 +00:00
[KEY_RESERVED] = "Reserved", [KEY_ESC] = "Esc",
[KEY_1] = "1", [KEY_2] = "2",
[KEY_3] = "3", [KEY_4] = "4",
[KEY_5] = "5", [KEY_6] = "6",
[KEY_7] = "7", [KEY_8] = "8",
[KEY_9] = "9", [KEY_0] = "0",
[KEY_MINUS] = "Minus", [KEY_EQUAL] = "Equal",
[KEY_BACKSPACE] = "Backspace", [KEY_TAB] = "Tab",
[KEY_Q] = "Q", [KEY_W] = "W",
[KEY_E] = "E", [KEY_R] = "R",
[KEY_T] = "T", [KEY_Y] = "Y",
[KEY_U] = "U", [KEY_I] = "I",
[KEY_O] = "O", [KEY_P] = "P",
[KEY_LEFTBRACE] = "LeftBrace", [KEY_RIGHTBRACE] = "RightBrace",
[KEY_ENTER] = "Enter", [KEY_LEFTCTRL] = "LeftControl",
[KEY_A] = "A", [KEY_S] = "S",
[KEY_D] = "D", [KEY_F] = "F",
[KEY_G] = "G", [KEY_H] = "H",
[KEY_J] = "J", [KEY_K] = "K",
[KEY_L] = "L", [KEY_SEMICOLON] = "Semicolon",
[KEY_APOSTROPHE] = "Apostrophe", [KEY_GRAVE] = "Grave",
[KEY_LEFTSHIFT] = "LeftShift", [KEY_BACKSLASH] = "BackSlash",
[KEY_Z] = "Z", [KEY_X] = "X",
[KEY_C] = "C", [KEY_V] = "V",
[KEY_B] = "B", [KEY_N] = "N",
[KEY_M] = "M", [KEY_COMMA] = "Comma",
[KEY_DOT] = "Dot", [KEY_SLASH] = "Slash",
[KEY_RIGHTSHIFT] = "RightShift", [KEY_KPASTERISK] = "KPAsterisk",
[KEY_LEFTALT] = "LeftAlt", [KEY_SPACE] = "Space",
[KEY_CAPSLOCK] = "CapsLock", [KEY_F1] = "F1",
[KEY_F2] = "F2", [KEY_F3] = "F3",
[KEY_F4] = "F4", [KEY_F5] = "F5",
[KEY_F6] = "F6", [KEY_F7] = "F7",
[KEY_F8] = "F8", [KEY_F9] = "F9",
[KEY_F10] = "F10", [KEY_NUMLOCK] = "NumLock",
[KEY_SCROLLLOCK] = "ScrollLock", [KEY_KP7] = "KP7",
[KEY_KP8] = "KP8", [KEY_KP9] = "KP9",
[KEY_KPMINUS] = "KPMinus", [KEY_KP4] = "KP4",
[KEY_KP5] = "KP5", [KEY_KP6] = "KP6",
[KEY_KPPLUS] = "KPPlus", [KEY_KP1] = "KP1",
[KEY_KP2] = "KP2", [KEY_KP3] = "KP3",
[KEY_KP0] = "KP0", [KEY_KPDOT] = "KPDot",
[KEY_ZENKAKUHANKAKU] = "Zenkaku/Hankaku", [KEY_102ND] = "102nd",
[KEY_F11] = "F11", [KEY_F12] = "F12",
[KEY_RO] = "RO", [KEY_KATAKANA] = "Katakana",
[KEY_HIRAGANA] = "HIRAGANA", [KEY_HENKAN] = "Henkan",
[KEY_KATAKANAHIRAGANA] = "Katakana/Hiragana", [KEY_MUHENKAN] = "Muhenkan",
[KEY_KPJPCOMMA] = "KPJpComma", [KEY_KPENTER] = "KPEnter",
[KEY_RIGHTCTRL] = "RightCtrl", [KEY_KPSLASH] = "KPSlash",
[KEY_SYSRQ] = "SysRq", [KEY_RIGHTALT] = "RightAlt",
[KEY_LINEFEED] = "LineFeed", [KEY_HOME] = "Home",
[KEY_UP] = "Up", [KEY_PAGEUP] = "PageUp",
[KEY_LEFT] = "Left", [KEY_RIGHT] = "Right",
[KEY_END] = "End", [KEY_DOWN] = "Down",
[KEY_PAGEDOWN] = "PageDown", [KEY_INSERT] = "Insert",
[KEY_DELETE] = "Delete", [KEY_MACRO] = "Macro",
[KEY_MUTE] = "Mute", [KEY_VOLUMEDOWN] = "VolumeDown",
[KEY_VOLUMEUP] = "VolumeUp", [KEY_POWER] = "Power",
[KEY_KPEQUAL] = "KPEqual", [KEY_KPPLUSMINUS] = "KPPlusMinus",
[KEY_PAUSE] = "Pause", [KEY_KPCOMMA] = "KPComma",
[KEY_HANGUEL] = "Hangeul", [KEY_HANJA] = "Hanja",
[KEY_YEN] = "Yen", [KEY_LEFTMETA] = "LeftMeta",
[KEY_RIGHTMETA] = "RightMeta", [KEY_COMPOSE] = "Compose",
[KEY_STOP] = "Stop", [KEY_AGAIN] = "Again",
[KEY_PROPS] = "Props", [KEY_UNDO] = "Undo",
[KEY_FRONT] = "Front", [KEY_COPY] = "Copy",
[KEY_OPEN] = "Open", [KEY_PASTE] = "Paste",
[KEY_FIND] = "Find", [KEY_CUT] = "Cut",
[KEY_HELP] = "Help", [KEY_MENU] = "Menu",
[KEY_CALC] = "Calc", [KEY_SETUP] = "Setup",
[KEY_SLEEP] = "Sleep", [KEY_WAKEUP] = "WakeUp",
[KEY_FILE] = "File", [KEY_SENDFILE] = "SendFile",
[KEY_DELETEFILE] = "DeleteFile", [KEY_XFER] = "X-fer",
[KEY_PROG1] = "Prog1", [KEY_PROG2] = "Prog2",
[KEY_WWW] = "WWW", [KEY_MSDOS] = "MSDOS",
[KEY_COFFEE] = "Coffee", [KEY_DIRECTION] = "Direction",
[KEY_CYCLEWINDOWS] = "CycleWindows", [KEY_MAIL] = "Mail",
[KEY_BOOKMARKS] = "Bookmarks", [KEY_COMPUTER] = "Computer",
[KEY_BACK] = "Back", [KEY_FORWARD] = "Forward",
[KEY_CLOSECD] = "CloseCD", [KEY_EJECTCD] = "EjectCD",
[KEY_EJECTCLOSECD] = "EjectCloseCD", [KEY_NEXTSONG] = "NextSong",
[KEY_PLAYPAUSE] = "PlayPause", [KEY_PREVIOUSSONG] = "PreviousSong",
[KEY_STOPCD] = "StopCD", [KEY_RECORD] = "Record",
[KEY_REWIND] = "Rewind", [KEY_PHONE] = "Phone",
[KEY_ISO] = "ISOKey", [KEY_CONFIG] = "Config",
[KEY_HOMEPAGE] = "HomePage", [KEY_REFRESH] = "Refresh",
[KEY_EXIT] = "Exit", [KEY_MOVE] = "Move",
[KEY_EDIT] = "Edit", [KEY_SCROLLUP] = "ScrollUp",
[KEY_SCROLLDOWN] = "ScrollDown", [KEY_KPLEFTPAREN] = "KPLeftParenthesis",
[KEY_KPRIGHTPAREN] = "KPRightParenthesis", [KEY_NEW] = "New",
[KEY_REDO] = "Redo", [KEY_F13] = "F13",
[KEY_F14] = "F14", [KEY_F15] = "F15",
[KEY_F16] = "F16", [KEY_F17] = "F17",
[KEY_F18] = "F18", [KEY_F19] = "F19",
[KEY_F20] = "F20", [KEY_F21] = "F21",
[KEY_F22] = "F22", [KEY_F23] = "F23",
[KEY_F24] = "F24", [KEY_PLAYCD] = "PlayCD",
[KEY_PAUSECD] = "PauseCD", [KEY_PROG3] = "Prog3",
[KEY_PROG4] = "Prog4", [KEY_SUSPEND] = "Suspend",
[KEY_CLOSE] = "Close", [KEY_PLAY] = "Play",
[KEY_FASTFORWARD] = "FastForward", [KEY_BASSBOOST] = "BassBoost",
[KEY_PRINT] = "Print", [KEY_HP] = "HP",
[KEY_CAMERA] = "Camera", [KEY_SOUND] = "Sound",
[KEY_QUESTION] = "Question", [KEY_EMAIL] = "Email",
[KEY_CHAT] = "Chat", [KEY_SEARCH] = "Search",
[KEY_CONNECT] = "Connect", [KEY_FINANCE] = "Finance",
[KEY_SPORT] = "Sport", [KEY_SHOP] = "Shop",
[KEY_ALTERASE] = "AlternateErase", [KEY_CANCEL] = "Cancel",
[KEY_BRIGHTNESSDOWN] = "BrightnessDown", [KEY_BRIGHTNESSUP] = "BrightnessUp",
[KEY_MEDIA] = "Media", [KEY_UNKNOWN] = "Unknown",
[BTN_0] = "Btn0", [BTN_1] = "Btn1",
[BTN_2] = "Btn2", [BTN_3] = "Btn3",
[BTN_4] = "Btn4", [BTN_5] = "Btn5",
[BTN_6] = "Btn6", [BTN_7] = "Btn7",
[BTN_8] = "Btn8", [BTN_9] = "Btn9",
[BTN_LEFT] = "LeftBtn", [BTN_RIGHT] = "RightBtn",
[BTN_MIDDLE] = "MiddleBtn", [BTN_SIDE] = "SideBtn",
[BTN_EXTRA] = "ExtraBtn", [BTN_FORWARD] = "ForwardBtn",
[BTN_BACK] = "BackBtn", [BTN_TASK] = "TaskBtn",
[BTN_TRIGGER] = "Trigger", [BTN_THUMB] = "ThumbBtn",
[BTN_THUMB2] = "ThumbBtn2", [BTN_TOP] = "TopBtn",
[BTN_TOP2] = "TopBtn2", [BTN_PINKIE] = "PinkieBtn",
[BTN_BASE] = "BaseBtn", [BTN_BASE2] = "BaseBtn2",
[BTN_BASE3] = "BaseBtn3", [BTN_BASE4] = "BaseBtn4",
[BTN_BASE5] = "BaseBtn5", [BTN_BASE6] = "BaseBtn6",
[BTN_DEAD] = "BtnDead", [BTN_A] = "BtnA",
[BTN_B] = "BtnB", [BTN_C] = "BtnC",
[BTN_X] = "BtnX", [BTN_Y] = "BtnY",
[BTN_Z] = "BtnZ", [BTN_TL] = "BtnTL",
[BTN_TR] = "BtnTR", [BTN_TL2] = "BtnTL2",
[BTN_TR2] = "BtnTR2", [BTN_SELECT] = "BtnSelect",
[BTN_START] = "BtnStart", [BTN_MODE] = "BtnMode",
[BTN_THUMBL] = "BtnThumbL", [BTN_THUMBR] = "BtnThumbR",
[BTN_TOOL_PEN] = "ToolPen", [BTN_TOOL_RUBBER] = "ToolRubber",
[BTN_TOOL_BRUSH] = "ToolBrush", [BTN_TOOL_PENCIL] = "ToolPencil",
[BTN_TOOL_AIRBRUSH] = "ToolAirbrush", [BTN_TOOL_FINGER] = "ToolFinger",
[BTN_TOOL_MOUSE] = "ToolMouse", [BTN_TOOL_LENS] = "ToolLens",
[BTN_TOUCH] = "Touch", [BTN_STYLUS] = "Stylus",
[BTN_STYLUS2] = "Stylus2", [BTN_TOOL_DOUBLETAP] = "ToolDoubleTap",
[BTN_TOOL_TRIPLETAP] = "ToolTripleTap", [BTN_GEAR_DOWN] = "WheelBtn",
[BTN_GEAR_UP] = "Gear up", [KEY_OK] = "Ok",
[KEY_SELECT] = "Select", [KEY_GOTO] = "Goto",
[KEY_CLEAR] = "Clear", [KEY_POWER2] = "Power2",
[KEY_OPTION] = "Option", [KEY_INFO] = "Info",
[KEY_TIME] = "Time", [KEY_VENDOR] = "Vendor",
[KEY_ARCHIVE] = "Archive", [KEY_PROGRAM] = "Program",
[KEY_CHANNEL] = "Channel", [KEY_FAVORITES] = "Favorites",
[KEY_EPG] = "EPG", [KEY_PVR] = "PVR",
[KEY_MHP] = "MHP", [KEY_LANGUAGE] = "Language",
[KEY_TITLE] = "Title", [KEY_SUBTITLE] = "Subtitle",
[KEY_ANGLE] = "Angle", [KEY_ZOOM] = "Zoom",
[KEY_MODE] = "Mode", [KEY_KEYBOARD] = "Keyboard",
[KEY_SCREEN] = "Screen", [KEY_PC] = "PC",
[KEY_TV] = "TV", [KEY_TV2] = "TV2",
[KEY_VCR] = "VCR", [KEY_VCR2] = "VCR2",
[KEY_SAT] = "Sat", [KEY_SAT2] = "Sat2",
[KEY_CD] = "CD", [KEY_TAPE] = "Tape",
[KEY_RADIO] = "Radio", [KEY_TUNER] = "Tuner",
[KEY_PLAYER] = "Player", [KEY_TEXT] = "Text",
[KEY_DVD] = "DVD", [KEY_AUX] = "Aux",
[KEY_MP3] = "MP3", [KEY_AUDIO] = "Audio",
[KEY_VIDEO] = "Video", [KEY_DIRECTORY] = "Directory",
[KEY_LIST] = "List", [KEY_MEMO] = "Memo",
[KEY_CALENDAR] = "Calendar", [KEY_RED] = "Red",
[KEY_GREEN] = "Green", [KEY_YELLOW] = "Yellow",
[KEY_BLUE] = "Blue", [KEY_CHANNELUP] = "ChannelUp",
[KEY_CHANNELDOWN] = "ChannelDown", [KEY_FIRST] = "First",
[KEY_LAST] = "Last", [KEY_AB] = "AB",
[KEY_NEXT] = "Next", [KEY_RESTART] = "Restart",
[KEY_SLOW] = "Slow", [KEY_SHUFFLE] = "Shuffle",
[KEY_BREAK] = "Break", [KEY_PREVIOUS] = "Previous",
[KEY_DIGITS] = "Digits", [KEY_TEEN] = "TEEN",
[KEY_TWEN] = "TWEN", [KEY_DEL_EOL] = "DeleteEOL",
[KEY_DEL_EOS] = "DeleteEOS", [KEY_INS_LINE] = "InsertLine",
[KEY_DEL_LINE] = "DeleteLine",
[KEY_SEND] = "Send", [KEY_REPLY] = "Reply",
[KEY_FORWARDMAIL] = "ForwardMail", [KEY_SAVE] = "Save",
HID: add support for Microsoft Natural Ergonomic Keyboard 4000 This keyboard emits a few usages that are not handled properly by hid-input. The usages from MSVENDOR page are colliding with Chicony Tactical Pad device, so we have to distinguish in runtime. Ugly ... Also, the buttons 1-5 have to be handled in a non-standard way, as they are emitted by the keyboard in a bitfield-like fashion, but the field is not presented as bit-field by the keyboard. The keys can't be pressed simultaneously, so the handling we have is correct. This patch also extends hid_keyboard[] with KPLeftParenthesis and KPRightParenthesis as defined by Keyboard page in HUT 1.12. The corresponding usages are also emitted by this keyboard. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-08-09 11:24:11 +00:00
[KEY_DOCUMENTS] = "Documents", [KEY_SPELLCHECK] = "SpellCheck",
Input: add KEY_LOGOFF HUT 1.12 defines Logoff usage 0x19c in Consumer page. There are keyboards out there emitting this usage code (for example Microsoft Wireless Laser Keyboard 6000). Add this key so that HID code could map usages to it. Signed-off-by: Khelben Blackstaff <eye.of.the.8eholder@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-10-04 08:32:03 +00:00
[KEY_LOGOFF] = "Logoff",
HID: hid debug from hid-debug.h to hid layer hid-debug.h contains a lot of code, and should not therefore be a header. This patch moves the code to generic hid layer as .c source, and introduces CONFIG_HID_DEBUG to conditionally compile it, instead of playing with #define DEBUG and including hid-debug.h. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-01-25 10:43:31 +00:00
[KEY_FN] = "Fn", [KEY_FN_ESC] = "Fn+ESC",
[KEY_FN_1] = "Fn+1", [KEY_FN_2] = "Fn+2",
[KEY_FN_B] = "Fn+B", [KEY_FN_D] = "Fn+D",
[KEY_FN_E] = "Fn+E", [KEY_FN_F] = "Fn+F",
[KEY_FN_S] = "Fn+S",
[KEY_FN_F1] = "Fn+F1", [KEY_FN_F2] = "Fn+F2",
[KEY_FN_F3] = "Fn+F3", [KEY_FN_F4] = "Fn+F4",
[KEY_FN_F5] = "Fn+F5", [KEY_FN_F6] = "Fn+F6",
[KEY_FN_F7] = "Fn+F7", [KEY_FN_F8] = "Fn+F8",
[KEY_FN_F9] = "Fn+F9", [KEY_FN_F10] = "Fn+F10",
[KEY_FN_F11] = "Fn+F11", [KEY_FN_F12] = "Fn+F12",
[KEY_KBDILLUMTOGGLE] = "KbdIlluminationToggle",
[KEY_KBDILLUMDOWN] = "KbdIlluminationDown",
[KEY_KBDILLUMUP] = "KbdIlluminationUp",
[KEY_SWITCHVIDEOMODE] = "SwitchVideoMode",
};
HID: trivial fixes in hid-debug - added KERN_DEBUG to output lines - fixed preffered -> preferred typo - added const to char *'s Also, exported symbol hid_resolv_event is unused by the current kernel tree and perhaps should be removed. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-09-26 14:29:53 +00:00
static const char *relatives[REL_MAX + 1] = {
HID: hid debug from hid-debug.h to hid layer hid-debug.h contains a lot of code, and should not therefore be a header. This patch moves the code to generic hid layer as .c source, and introduces CONFIG_HID_DEBUG to conditionally compile it, instead of playing with #define DEBUG and including hid-debug.h. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-01-25 10:43:31 +00:00
[REL_X] = "X", [REL_Y] = "Y",
[REL_Z] = "Z", [REL_RX] = "Rx",
[REL_RY] = "Ry", [REL_RZ] = "Rz",
[REL_HWHEEL] = "HWheel", [REL_DIAL] = "Dial",
[REL_WHEEL] = "Wheel", [REL_MISC] = "Misc",
};
HID: trivial fixes in hid-debug - added KERN_DEBUG to output lines - fixed preffered -> preferred typo - added const to char *'s Also, exported symbol hid_resolv_event is unused by the current kernel tree and perhaps should be removed. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-09-26 14:29:53 +00:00
static const char *absolutes[ABS_MAX + 1] = {
HID: hid debug from hid-debug.h to hid layer hid-debug.h contains a lot of code, and should not therefore be a header. This patch moves the code to generic hid layer as .c source, and introduces CONFIG_HID_DEBUG to conditionally compile it, instead of playing with #define DEBUG and including hid-debug.h. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-01-25 10:43:31 +00:00
[ABS_X] = "X", [ABS_Y] = "Y",
[ABS_Z] = "Z", [ABS_RX] = "Rx",
[ABS_RY] = "Ry", [ABS_RZ] = "Rz",
[ABS_THROTTLE] = "Throttle", [ABS_RUDDER] = "Rudder",
[ABS_WHEEL] = "Wheel", [ABS_GAS] = "Gas",
[ABS_BRAKE] = "Brake", [ABS_HAT0X] = "Hat0X",
[ABS_HAT0Y] = "Hat0Y", [ABS_HAT1X] = "Hat1X",
[ABS_HAT1Y] = "Hat1Y", [ABS_HAT2X] = "Hat2X",
[ABS_HAT2Y] = "Hat2Y", [ABS_HAT3X] = "Hat3X",
[ABS_HAT3Y] = "Hat 3Y", [ABS_PRESSURE] = "Pressure",
[ABS_DISTANCE] = "Distance", [ABS_TILT_X] = "XTilt",
HID: add new multitouch and digitizer contants Added constants to hid.h for all digitizer usages (including the new multitouch ones that are not yet in the official USB spec but are being pushed by Microsft as described in their paper "Digitizer Drivers for Windows Touch and Pen-Based Computers"). Updated hid-debug.c to support the new MT input constants such as ABS_MT_POSITION_X. Signed-off-by: Stephane Chatty <chatty@enac.fr> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-05-20 13:41:24 +00:00
[ABS_TILT_Y] = "YTilt", [ABS_TOOL_WIDTH] = "ToolWidth",
HID: hid debug from hid-debug.h to hid layer hid-debug.h contains a lot of code, and should not therefore be a header. This patch moves the code to generic hid layer as .c source, and introduces CONFIG_HID_DEBUG to conditionally compile it, instead of playing with #define DEBUG and including hid-debug.h. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-01-25 10:43:31 +00:00
[ABS_VOLUME] = "Volume", [ABS_MISC] = "Misc",
HID: add new multitouch and digitizer contants Added constants to hid.h for all digitizer usages (including the new multitouch ones that are not yet in the official USB spec but are being pushed by Microsft as described in their paper "Digitizer Drivers for Windows Touch and Pen-Based Computers"). Updated hid-debug.c to support the new MT input constants such as ABS_MT_POSITION_X. Signed-off-by: Stephane Chatty <chatty@enac.fr> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-05-20 13:41:24 +00:00
[ABS_MT_TOUCH_MAJOR] = "MTMajor",
[ABS_MT_TOUCH_MINOR] = "MTMinor",
[ABS_MT_WIDTH_MAJOR] = "MTMajorW",
[ABS_MT_WIDTH_MINOR] = "MTMinorW",
[ABS_MT_ORIENTATION] = "MTOrientation",
[ABS_MT_POSITION_X] = "MTPositionX",
[ABS_MT_POSITION_Y] = "MTPositionY",
[ABS_MT_TOOL_TYPE] = "MTToolType",
[ABS_MT_BLOB_ID] = "MTBlobID",
HID: hid debug from hid-debug.h to hid layer hid-debug.h contains a lot of code, and should not therefore be a header. This patch moves the code to generic hid layer as .c source, and introduces CONFIG_HID_DEBUG to conditionally compile it, instead of playing with #define DEBUG and including hid-debug.h. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-01-25 10:43:31 +00:00
};
HID: trivial fixes in hid-debug - added KERN_DEBUG to output lines - fixed preffered -> preferred typo - added const to char *'s Also, exported symbol hid_resolv_event is unused by the current kernel tree and perhaps should be removed. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-09-26 14:29:53 +00:00
static const char *misc[MSC_MAX + 1] = {
HID: hid debug from hid-debug.h to hid layer hid-debug.h contains a lot of code, and should not therefore be a header. This patch moves the code to generic hid layer as .c source, and introduces CONFIG_HID_DEBUG to conditionally compile it, instead of playing with #define DEBUG and including hid-debug.h. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-01-25 10:43:31 +00:00
[MSC_SERIAL] = "Serial", [MSC_PULSELED] = "Pulseled",
[MSC_GESTURE] = "Gesture", [MSC_RAW] = "RawData"
};
HID: trivial fixes in hid-debug - added KERN_DEBUG to output lines - fixed preffered -> preferred typo - added const to char *'s Also, exported symbol hid_resolv_event is unused by the current kernel tree and perhaps should be removed. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-09-26 14:29:53 +00:00
static const char *leds[LED_MAX + 1] = {
HID: hid debug from hid-debug.h to hid layer hid-debug.h contains a lot of code, and should not therefore be a header. This patch moves the code to generic hid layer as .c source, and introduces CONFIG_HID_DEBUG to conditionally compile it, instead of playing with #define DEBUG and including hid-debug.h. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-01-25 10:43:31 +00:00
[LED_NUML] = "NumLock", [LED_CAPSL] = "CapsLock",
[LED_SCROLLL] = "ScrollLock", [LED_COMPOSE] = "Compose",
[LED_KANA] = "Kana", [LED_SLEEP] = "Sleep",
[LED_SUSPEND] = "Suspend", [LED_MUTE] = "Mute",
[LED_MISC] = "Misc",
};
HID: trivial fixes in hid-debug - added KERN_DEBUG to output lines - fixed preffered -> preferred typo - added const to char *'s Also, exported symbol hid_resolv_event is unused by the current kernel tree and perhaps should be removed. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-09-26 14:29:53 +00:00
static const char *repeats[REP_MAX + 1] = {
HID: hid debug from hid-debug.h to hid layer hid-debug.h contains a lot of code, and should not therefore be a header. This patch moves the code to generic hid layer as .c source, and introduces CONFIG_HID_DEBUG to conditionally compile it, instead of playing with #define DEBUG and including hid-debug.h. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-01-25 10:43:31 +00:00
[REP_DELAY] = "Delay", [REP_PERIOD] = "Period"
};
HID: trivial fixes in hid-debug - added KERN_DEBUG to output lines - fixed preffered -> preferred typo - added const to char *'s Also, exported symbol hid_resolv_event is unused by the current kernel tree and perhaps should be removed. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-09-26 14:29:53 +00:00
static const char *sounds[SND_MAX + 1] = {
HID: hid debug from hid-debug.h to hid layer hid-debug.h contains a lot of code, and should not therefore be a header. This patch moves the code to generic hid layer as .c source, and introduces CONFIG_HID_DEBUG to conditionally compile it, instead of playing with #define DEBUG and including hid-debug.h. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-01-25 10:43:31 +00:00
[SND_CLICK] = "Click", [SND_BELL] = "Bell",
[SND_TONE] = "Tone"
};
HID: trivial fixes in hid-debug - added KERN_DEBUG to output lines - fixed preffered -> preferred typo - added const to char *'s Also, exported symbol hid_resolv_event is unused by the current kernel tree and perhaps should be removed. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-09-26 14:29:53 +00:00
static const char **names[EV_MAX + 1] = {
HID: hid debug from hid-debug.h to hid layer hid-debug.h contains a lot of code, and should not therefore be a header. This patch moves the code to generic hid layer as .c source, and introduces CONFIG_HID_DEBUG to conditionally compile it, instead of playing with #define DEBUG and including hid-debug.h. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-01-25 10:43:31 +00:00
[EV_SYN] = syncs, [EV_KEY] = keys,
[EV_REL] = relatives, [EV_ABS] = absolutes,
[EV_MSC] = misc, [EV_LED] = leds,
[EV_SND] = sounds, [EV_REP] = repeats,
};
HID: hid-debug.c: make local symbols static hid-debug.c: make local symbols static The symbols hid_resolv_event and hid_dump_input_mapping are only used locally in this file. Make them static to prevent the following sparse warnings: warning: symbol 'hid_resolv_event' was not declared. Should it be static? warning: symbol 'hid_dump_input_mapping' was not declared. Should it be static? Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-01-15 02:10:07 +00:00
static void hid_resolv_event(__u8 type, __u16 code, struct seq_file *f)
{
HID: use debugfs for report dumping descriptor It is a little bit inconvenient for people who have some non-standard HID hardware (usually violating the HID specification) to have to recompile kernel with CONFIG_HID_DEBUG to be able to see kernel's perspective of the HID report descriptor and observe the parsed events. Plus the messages are then mixed up inconveniently with the rest of the dmesg stuff. This patch implements /sys/kernel/debug/hid/<device>/rdesc file, which represents the kernel's view of report descriptor (both the raw report descriptor data and parsed contents). With all the device-specific debug data being available through debugfs, there is no need for keeping CONFIG_HID_DEBUG, as the 'debug' parameter to the hid module will now only output only driver-specific debugging options, which has absolutely minimal memory footprint, just a few error messages and one global flag (hid_debug). We use the current set of output formatting functions. The ones that need to be used both for one-shot rdesc seq_file and also for continuous flow of data (individual reports, as being sent by the device) distinguish according to the passed seq_file parameter, and if it is NULL, it still output to kernel ringbuffer, otherwise the corresponding seq_file is used for output. The format of the output is preserved. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-06-12 13:20:55 +00:00
seq_printf(f, "%s.%s", events[type] ? events[type] : "?",
HID: hid debug from hid-debug.h to hid layer hid-debug.h contains a lot of code, and should not therefore be a header. This patch moves the code to generic hid layer as .c source, and introduces CONFIG_HID_DEBUG to conditionally compile it, instead of playing with #define DEBUG and including hid-debug.h. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-01-25 10:43:31 +00:00
names[type] ? (names[type][code] ? names[type][code] : "?") : "?");
}
HID: use debugfs for report dumping descriptor It is a little bit inconvenient for people who have some non-standard HID hardware (usually violating the HID specification) to have to recompile kernel with CONFIG_HID_DEBUG to be able to see kernel's perspective of the HID report descriptor and observe the parsed events. Plus the messages are then mixed up inconveniently with the rest of the dmesg stuff. This patch implements /sys/kernel/debug/hid/<device>/rdesc file, which represents the kernel's view of report descriptor (both the raw report descriptor data and parsed contents). With all the device-specific debug data being available through debugfs, there is no need for keeping CONFIG_HID_DEBUG, as the 'debug' parameter to the hid module will now only output only driver-specific debugging options, which has absolutely minimal memory footprint, just a few error messages and one global flag (hid_debug). We use the current set of output formatting functions. The ones that need to be used both for one-shot rdesc seq_file and also for continuous flow of data (individual reports, as being sent by the device) distinguish according to the passed seq_file parameter, and if it is NULL, it still output to kernel ringbuffer, otherwise the corresponding seq_file is used for output. The format of the output is preserved. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-06-12 13:20:55 +00:00
HID: hid-debug.c: make local symbols static hid-debug.c: make local symbols static The symbols hid_resolv_event and hid_dump_input_mapping are only used locally in this file. Make them static to prevent the following sparse warnings: warning: symbol 'hid_resolv_event' was not declared. Should it be static? warning: symbol 'hid_dump_input_mapping' was not declared. Should it be static? Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-01-15 02:10:07 +00:00
static void hid_dump_input_mapping(struct hid_device *hid, struct seq_file *f)
HID: use debugfs for report dumping descriptor It is a little bit inconvenient for people who have some non-standard HID hardware (usually violating the HID specification) to have to recompile kernel with CONFIG_HID_DEBUG to be able to see kernel's perspective of the HID report descriptor and observe the parsed events. Plus the messages are then mixed up inconveniently with the rest of the dmesg stuff. This patch implements /sys/kernel/debug/hid/<device>/rdesc file, which represents the kernel's view of report descriptor (both the raw report descriptor data and parsed contents). With all the device-specific debug data being available through debugfs, there is no need for keeping CONFIG_HID_DEBUG, as the 'debug' parameter to the hid module will now only output only driver-specific debugging options, which has absolutely minimal memory footprint, just a few error messages and one global flag (hid_debug). We use the current set of output formatting functions. The ones that need to be used both for one-shot rdesc seq_file and also for continuous flow of data (individual reports, as being sent by the device) distinguish according to the passed seq_file parameter, and if it is NULL, it still output to kernel ringbuffer, otherwise the corresponding seq_file is used for output. The format of the output is preserved. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-06-12 13:20:55 +00:00
{
int i, j, k;
struct hid_report *report;
struct hid_usage *usage;
for (k = HID_INPUT_REPORT; k <= HID_OUTPUT_REPORT; k++) {
list_for_each_entry(report, &hid->report_enum[k].report_list, list) {
for (i = 0; i < report->maxfield; i++) {
for ( j = 0; j < report->field[i]->maxusage; j++) {
usage = report->field[i]->usage + j;
hid_resolv_usage(usage->hid, f);
seq_printf(f, " ---> ");
hid_resolv_event(usage->type, usage->code, f);
seq_printf(f, "\n");
}
}
}
}
}
HID: use debugfs for events/reports dumping This is a followup patch to the one implemeting rdesc representation in debugfs rather than being dependent on compile-time CONFIG_HID_DEBUG setting. The API of the appropriate formatting functions is slightly modified -- if they are passed seq_file pointer, the one-shot output for 'rdesc' file mode is used, and therefore the message is formatted into the corresponding seq_file immediately. Otherwise the called function allocated a new buffer, formats the text into the buffer and returns the pointer to it, so that it can be queued into the ring-buffer of the processess blocked waiting on input on 'events' file in debugfs. 'debug' parameter to the 'hid' module is now used solely for the prupose of inetrnal driver state debugging (parser, transport, etc). Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-06-12 13:20:57 +00:00
HID: use debugfs for report dumping descriptor It is a little bit inconvenient for people who have some non-standard HID hardware (usually violating the HID specification) to have to recompile kernel with CONFIG_HID_DEBUG to be able to see kernel's perspective of the HID report descriptor and observe the parsed events. Plus the messages are then mixed up inconveniently with the rest of the dmesg stuff. This patch implements /sys/kernel/debug/hid/<device>/rdesc file, which represents the kernel's view of report descriptor (both the raw report descriptor data and parsed contents). With all the device-specific debug data being available through debugfs, there is no need for keeping CONFIG_HID_DEBUG, as the 'debug' parameter to the hid module will now only output only driver-specific debugging options, which has absolutely minimal memory footprint, just a few error messages and one global flag (hid_debug). We use the current set of output formatting functions. The ones that need to be used both for one-shot rdesc seq_file and also for continuous flow of data (individual reports, as being sent by the device) distinguish according to the passed seq_file parameter, and if it is NULL, it still output to kernel ringbuffer, otherwise the corresponding seq_file is used for output. The format of the output is preserved. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-06-12 13:20:55 +00:00
static int hid_debug_rdesc_show(struct seq_file *f, void *p)
{
struct hid_device *hdev = f->private;
int i;
/* dump HID report descriptor */
for (i = 0; i < hdev->rsize; i++)
seq_printf(f, "%02x ", hdev->rdesc[i]);
seq_printf(f, "\n\n");
/* dump parsed data and input mappings */
hid_dump_device(hdev, f);
seq_printf(f, "\n");
hid_dump_input_mapping(hdev, f);
return 0;
}
static int hid_debug_rdesc_open(struct inode *inode, struct file *file)
{
return single_open(file, hid_debug_rdesc_show, inode->i_private);
}
HID: use debugfs for events/reports dumping This is a followup patch to the one implemeting rdesc representation in debugfs rather than being dependent on compile-time CONFIG_HID_DEBUG setting. The API of the appropriate formatting functions is slightly modified -- if they are passed seq_file pointer, the one-shot output for 'rdesc' file mode is used, and therefore the message is formatted into the corresponding seq_file immediately. Otherwise the called function allocated a new buffer, formats the text into the buffer and returns the pointer to it, so that it can be queued into the ring-buffer of the processess blocked waiting on input on 'events' file in debugfs. 'debug' parameter to the 'hid' module is now used solely for the prupose of inetrnal driver state debugging (parser, transport, etc). Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-06-12 13:20:57 +00:00
static int hid_debug_events_open(struct inode *inode, struct file *file)
{
int err = 0;
struct hid_debug_list *list;
if (!(list = kzalloc(sizeof(struct hid_debug_list), GFP_KERNEL))) {
err = -ENOMEM;
goto out;
}
if (!(list->hid_debug_buf = kzalloc(sizeof(char) * HID_DEBUG_BUFSIZE, GFP_KERNEL))) {
err = -ENOMEM;
HID: fix memory leak on error patch in debug code Error handling code following a kzalloc should free the allocated data. The semantic match that finds the problem is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @r exists@ local idexpression x; statement S; expression E; identifier f,f1,l; position p1,p2; expression *ptr != NULL; @@ x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...); ... if (x == NULL) S <... when != x when != if (...) { <+...x...+> } ( x->f1 = E | (x->f1 == NULL || ...) | f(...,x->f1,...) ) ...> ( return \(0\|<+...x...+>\|ptr\); | return@p2 ...; ) @script:python@ p1 << r.p1; p2 << r.p2; @@ print "* file: %s kmalloc %s return %s" % (p1[0].file,p1[0].line,p2[0].line) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Cc: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-08-08 00:26:10 +00:00
kfree(list);
HID: use debugfs for events/reports dumping This is a followup patch to the one implemeting rdesc representation in debugfs rather than being dependent on compile-time CONFIG_HID_DEBUG setting. The API of the appropriate formatting functions is slightly modified -- if they are passed seq_file pointer, the one-shot output for 'rdesc' file mode is used, and therefore the message is formatted into the corresponding seq_file immediately. Otherwise the called function allocated a new buffer, formats the text into the buffer and returns the pointer to it, so that it can be queued into the ring-buffer of the processess blocked waiting on input on 'events' file in debugfs. 'debug' parameter to the 'hid' module is now used solely for the prupose of inetrnal driver state debugging (parser, transport, etc). Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-06-12 13:20:57 +00:00
goto out;
}
list->hdev = (struct hid_device *) inode->i_private;
file->private_data = list;
mutex_init(&list->read_mutex);
list_add_tail(&list->node, &list->hdev->debug_list);
out:
return err;
}
static ssize_t hid_debug_events_read(struct file *file, char __user *buffer,
size_t count, loff_t *ppos)
{
struct hid_debug_list *list = file->private_data;
int ret = 0, len;
DECLARE_WAITQUEUE(wait, current);
while (ret == 0) {
mutex_lock(&list->read_mutex);
if (list->head == list->tail) {
add_wait_queue(&list->hdev->debug_wait, &wait);
set_current_state(TASK_INTERRUPTIBLE);
while (list->head == list->tail) {
if (file->f_flags & O_NONBLOCK) {
ret = -EAGAIN;
break;
}
if (signal_pending(current)) {
ret = -ERESTARTSYS;
break;
}
if (!list->hdev || !list->hdev->debug) {
ret = -EIO;
break;
}
/* allow O_NONBLOCK from other threads */
mutex_unlock(&list->read_mutex);
schedule();
mutex_lock(&list->read_mutex);
set_current_state(TASK_INTERRUPTIBLE);
}
set_current_state(TASK_RUNNING);
remove_wait_queue(&list->hdev->debug_wait, &wait);
}
if (ret)
goto out;
/* pass the ringbuffer contents to userspace */
copy_rest:
if (list->tail == list->head)
goto out;
if (list->tail > list->head) {
len = list->tail - list->head;
if (copy_to_user(buffer + ret, &list->hid_debug_buf[list->head], len)) {
ret = -EFAULT;
goto out;
}
ret += len;
list->head += len;
} else {
len = HID_DEBUG_BUFSIZE - list->head;
if (copy_to_user(buffer, &list->hid_debug_buf[list->head], len)) {
ret = -EFAULT;
goto out;
}
list->head = 0;
ret += len;
goto copy_rest;
}
}
out:
mutex_unlock(&list->read_mutex);
return ret;
}
static unsigned int hid_debug_events_poll(struct file *file, poll_table *wait)
{
struct hid_debug_list *list = file->private_data;
poll_wait(file, &list->hdev->debug_wait, wait);
if (list->head != list->tail)
return POLLIN | POLLRDNORM;
if (!list->hdev->debug)
return POLLERR | POLLHUP;
return 0;
}
static int hid_debug_events_release(struct inode *inode, struct file *file)
{
struct hid_debug_list *list = file->private_data;
list_del(&list->node);
kfree(list->hid_debug_buf);
kfree(list);
return 0;
}
HID: use debugfs for report dumping descriptor It is a little bit inconvenient for people who have some non-standard HID hardware (usually violating the HID specification) to have to recompile kernel with CONFIG_HID_DEBUG to be able to see kernel's perspective of the HID report descriptor and observe the parsed events. Plus the messages are then mixed up inconveniently with the rest of the dmesg stuff. This patch implements /sys/kernel/debug/hid/<device>/rdesc file, which represents the kernel's view of report descriptor (both the raw report descriptor data and parsed contents). With all the device-specific debug data being available through debugfs, there is no need for keeping CONFIG_HID_DEBUG, as the 'debug' parameter to the hid module will now only output only driver-specific debugging options, which has absolutely minimal memory footprint, just a few error messages and one global flag (hid_debug). We use the current set of output formatting functions. The ones that need to be used both for one-shot rdesc seq_file and also for continuous flow of data (individual reports, as being sent by the device) distinguish according to the passed seq_file parameter, and if it is NULL, it still output to kernel ringbuffer, otherwise the corresponding seq_file is used for output. The format of the output is preserved. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-06-12 13:20:55 +00:00
static const struct file_operations hid_debug_rdesc_fops = {
.open = hid_debug_rdesc_open,
.read = seq_read,
.llseek = seq_lseek,
.release = single_release,
};
HID: use debugfs for events/reports dumping This is a followup patch to the one implemeting rdesc representation in debugfs rather than being dependent on compile-time CONFIG_HID_DEBUG setting. The API of the appropriate formatting functions is slightly modified -- if they are passed seq_file pointer, the one-shot output for 'rdesc' file mode is used, and therefore the message is formatted into the corresponding seq_file immediately. Otherwise the called function allocated a new buffer, formats the text into the buffer and returns the pointer to it, so that it can be queued into the ring-buffer of the processess blocked waiting on input on 'events' file in debugfs. 'debug' parameter to the 'hid' module is now used solely for the prupose of inetrnal driver state debugging (parser, transport, etc). Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-06-12 13:20:57 +00:00
static const struct file_operations hid_debug_events_fops = {
.owner = THIS_MODULE,
.open = hid_debug_events_open,
.read = hid_debug_events_read,
.poll = hid_debug_events_poll,
.release = hid_debug_events_release,
};
HID: use debugfs for report dumping descriptor It is a little bit inconvenient for people who have some non-standard HID hardware (usually violating the HID specification) to have to recompile kernel with CONFIG_HID_DEBUG to be able to see kernel's perspective of the HID report descriptor and observe the parsed events. Plus the messages are then mixed up inconveniently with the rest of the dmesg stuff. This patch implements /sys/kernel/debug/hid/<device>/rdesc file, which represents the kernel's view of report descriptor (both the raw report descriptor data and parsed contents). With all the device-specific debug data being available through debugfs, there is no need for keeping CONFIG_HID_DEBUG, as the 'debug' parameter to the hid module will now only output only driver-specific debugging options, which has absolutely minimal memory footprint, just a few error messages and one global flag (hid_debug). We use the current set of output formatting functions. The ones that need to be used both for one-shot rdesc seq_file and also for continuous flow of data (individual reports, as being sent by the device) distinguish according to the passed seq_file parameter, and if it is NULL, it still output to kernel ringbuffer, otherwise the corresponding seq_file is used for output. The format of the output is preserved. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-06-12 13:20:55 +00:00
void hid_debug_register(struct hid_device *hdev, const char *name)
{
hdev->debug_dir = debugfs_create_dir(name, hid_debug_root);
hdev->debug_rdesc = debugfs_create_file("rdesc", 0400,
hdev->debug_dir, hdev, &hid_debug_rdesc_fops);
HID: use debugfs for events/reports dumping This is a followup patch to the one implemeting rdesc representation in debugfs rather than being dependent on compile-time CONFIG_HID_DEBUG setting. The API of the appropriate formatting functions is slightly modified -- if they are passed seq_file pointer, the one-shot output for 'rdesc' file mode is used, and therefore the message is formatted into the corresponding seq_file immediately. Otherwise the called function allocated a new buffer, formats the text into the buffer and returns the pointer to it, so that it can be queued into the ring-buffer of the processess blocked waiting on input on 'events' file in debugfs. 'debug' parameter to the 'hid' module is now used solely for the prupose of inetrnal driver state debugging (parser, transport, etc). Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-06-12 13:20:57 +00:00
hdev->debug_events = debugfs_create_file("events", 0400,
hdev->debug_dir, hdev, &hid_debug_events_fops);
hdev->debug = 1;
HID: use debugfs for report dumping descriptor It is a little bit inconvenient for people who have some non-standard HID hardware (usually violating the HID specification) to have to recompile kernel with CONFIG_HID_DEBUG to be able to see kernel's perspective of the HID report descriptor and observe the parsed events. Plus the messages are then mixed up inconveniently with the rest of the dmesg stuff. This patch implements /sys/kernel/debug/hid/<device>/rdesc file, which represents the kernel's view of report descriptor (both the raw report descriptor data and parsed contents). With all the device-specific debug data being available through debugfs, there is no need for keeping CONFIG_HID_DEBUG, as the 'debug' parameter to the hid module will now only output only driver-specific debugging options, which has absolutely minimal memory footprint, just a few error messages and one global flag (hid_debug). We use the current set of output formatting functions. The ones that need to be used both for one-shot rdesc seq_file and also for continuous flow of data (individual reports, as being sent by the device) distinguish according to the passed seq_file parameter, and if it is NULL, it still output to kernel ringbuffer, otherwise the corresponding seq_file is used for output. The format of the output is preserved. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-06-12 13:20:55 +00:00
}
void hid_debug_unregister(struct hid_device *hdev)
{
HID: use debugfs for events/reports dumping This is a followup patch to the one implemeting rdesc representation in debugfs rather than being dependent on compile-time CONFIG_HID_DEBUG setting. The API of the appropriate formatting functions is slightly modified -- if they are passed seq_file pointer, the one-shot output for 'rdesc' file mode is used, and therefore the message is formatted into the corresponding seq_file immediately. Otherwise the called function allocated a new buffer, formats the text into the buffer and returns the pointer to it, so that it can be queued into the ring-buffer of the processess blocked waiting on input on 'events' file in debugfs. 'debug' parameter to the 'hid' module is now used solely for the prupose of inetrnal driver state debugging (parser, transport, etc). Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-06-12 13:20:57 +00:00
hdev->debug = 0;
wake_up_interruptible(&hdev->debug_wait);
HID: use debugfs for report dumping descriptor It is a little bit inconvenient for people who have some non-standard HID hardware (usually violating the HID specification) to have to recompile kernel with CONFIG_HID_DEBUG to be able to see kernel's perspective of the HID report descriptor and observe the parsed events. Plus the messages are then mixed up inconveniently with the rest of the dmesg stuff. This patch implements /sys/kernel/debug/hid/<device>/rdesc file, which represents the kernel's view of report descriptor (both the raw report descriptor data and parsed contents). With all the device-specific debug data being available through debugfs, there is no need for keeping CONFIG_HID_DEBUG, as the 'debug' parameter to the hid module will now only output only driver-specific debugging options, which has absolutely minimal memory footprint, just a few error messages and one global flag (hid_debug). We use the current set of output formatting functions. The ones that need to be used both for one-shot rdesc seq_file and also for continuous flow of data (individual reports, as being sent by the device) distinguish according to the passed seq_file parameter, and if it is NULL, it still output to kernel ringbuffer, otherwise the corresponding seq_file is used for output. The format of the output is preserved. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-06-12 13:20:55 +00:00
debugfs_remove(hdev->debug_rdesc);
HID: use debugfs for events/reports dumping This is a followup patch to the one implemeting rdesc representation in debugfs rather than being dependent on compile-time CONFIG_HID_DEBUG setting. The API of the appropriate formatting functions is slightly modified -- if they are passed seq_file pointer, the one-shot output for 'rdesc' file mode is used, and therefore the message is formatted into the corresponding seq_file immediately. Otherwise the called function allocated a new buffer, formats the text into the buffer and returns the pointer to it, so that it can be queued into the ring-buffer of the processess blocked waiting on input on 'events' file in debugfs. 'debug' parameter to the 'hid' module is now used solely for the prupose of inetrnal driver state debugging (parser, transport, etc). Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-06-12 13:20:57 +00:00
debugfs_remove(hdev->debug_events);
HID: use debugfs for report dumping descriptor It is a little bit inconvenient for people who have some non-standard HID hardware (usually violating the HID specification) to have to recompile kernel with CONFIG_HID_DEBUG to be able to see kernel's perspective of the HID report descriptor and observe the parsed events. Plus the messages are then mixed up inconveniently with the rest of the dmesg stuff. This patch implements /sys/kernel/debug/hid/<device>/rdesc file, which represents the kernel's view of report descriptor (both the raw report descriptor data and parsed contents). With all the device-specific debug data being available through debugfs, there is no need for keeping CONFIG_HID_DEBUG, as the 'debug' parameter to the hid module will now only output only driver-specific debugging options, which has absolutely minimal memory footprint, just a few error messages and one global flag (hid_debug). We use the current set of output formatting functions. The ones that need to be used both for one-shot rdesc seq_file and also for continuous flow of data (individual reports, as being sent by the device) distinguish according to the passed seq_file parameter, and if it is NULL, it still output to kernel ringbuffer, otherwise the corresponding seq_file is used for output. The format of the output is preserved. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-06-12 13:20:55 +00:00
debugfs_remove(hdev->debug_dir);
}
void hid_debug_init(void)
{
hid_debug_root = debugfs_create_dir("hid", NULL);
}
void hid_debug_exit(void)
{
debugfs_remove_recursive(hid_debug_root);
}
Reference in New Issue Copy Permalink