kernel-ark/lib/lz4/lz4defs.h

157 lines
3.7 KiB
C
Raw Normal View History

decompressor: add LZ4 decompressor module Add support for LZ4 decompression in the Linux Kernel. LZ4 Decompression APIs for kernel are based on LZ4 implementation by Yann Collet. Benchmark Results(PATCH v3) Compiler: Linaro ARM gcc 4.6.2 1. ARMv7, 1.5GHz based board Kernel: linux 3.4 Uncompressed Kernel Size: 14MB Compressed Size Decompression Speed LZO 6.7MB 20.1MB/s, 25.2MB/s(UA) LZ4 7.3MB 29.1MB/s, 45.6MB/s(UA) 2. ARMv7, 1.7GHz based board Kernel: linux 3.7 Uncompressed Kernel Size: 14MB Compressed Size Decompression Speed LZO 6.0MB 34.1MB/s, 52.2MB/s(UA) LZ4 6.5MB 86.7MB/s - UA: Unaligned memory Access support - Latest patch set for LZO applied This patch set is for adding support for LZ4-compressed Kernel. LZ4 is a very fast lossless compression algorithm and it also features an extremely fast decoder [1]. But we have five of decompressors already and one question which does arise, however, is that of where do we stop adding new ones? This issue had been discussed and came to the conclusion [2]. Russell King said that we should have: - one decompressor which is the fastest - one decompressor for the highest compression ratio - one popular decompressor (eg conventional gzip) If we have a replacement one for one of these, then it should do exactly that: replace it. The benchmark shows that an 8% increase in image size vs a 66% increase in decompression speed compared to LZO(which has been known as the fastest decompressor in the Kernel). Therefore the "fast but may not be small" compression title has clearly been taken by LZ4 [3]. [1] http://code.google.com/p/lz4/ [2] http://thread.gmane.org/gmane.linux.kbuild.devel/9157 [3] http://thread.gmane.org/gmane.linux.kbuild.devel/9347 LZ4 homepage: http://fastcompression.blogspot.com/p/lz4.html LZ4 source repository: http://code.google.com/p/lz4/ Signed-off-by: Kyungsik Lee <kyungsik.lee@lge.com> Signed-off-by: Yann Collet <yann.collet.73@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Borislav Petkov <bp@alien8.de> Cc: Florian Fainelli <florian@openwrt.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-08 23:01:45 +00:00
/*
* lz4defs.h -- architecture specific defines
*
* Copyright (C) 2013, LG Electronics, Kyungsik Lee <kyungsik.lee@lge.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/*
* Detects 64 bits mode
*/
#if (defined(__x86_64__) || defined(__x86_64) || defined(__amd64__) \
|| defined(__ppc64__) || defined(__LP64__))
#define LZ4_ARCH64 1
#else
#define LZ4_ARCH64 0
#endif
/*
* Architecture-specific macros
*/
#define BYTE u8
lib: add lz4 compressor module This patchset is for supporting LZ4 compression and the crypto API using it. As shown below, the size of data is a little bit bigger but compressing speed is faster under the enabled unaligned memory access. We can use lz4 de/compression through crypto API as well. Also, It will be useful for another potential user of lz4 compression. lz4 Compression Benchmark: Compiler: ARM gcc 4.6.4 ARMv7, 1 GHz based board Kernel: linux 3.4 Uncompressed data Size: 101 MB Compressed Size compression Speed LZO 72.1MB 32.1MB/s, 33.0MB/s(UA) LZ4 75.1MB 30.4MB/s, 35.9MB/s(UA) LZ4HC 59.8MB 2.4MB/s, 2.5MB/s(UA) - UA: Unaligned memory Access support - Latest patch set for LZO applied This patch: Add support for LZ4 compression in the Linux Kernel. LZ4 Compression APIs for kernel are based on LZ4 implementation by Yann Collet and were changed for kernel coding style. LZ4 homepage : http://fastcompression.blogspot.com/p/lz4.html LZ4 source repository : http://code.google.com/p/lz4/ svn revision : r90 Two APIs are added: lz4_compress() support basic lz4 compression whereas lz4hc_compress() support high compression or CPU performance get lower but compression ratio get higher. Also, we require the pre-allocated working memory with the defined size and destination buffer must be allocated with the size of lz4_compressbound. [akpm@linux-foundation.org: make lz4_compresshcctx() static] Signed-off-by: Chanho Min <chanho.min@lge.com> Cc: "Darrick J. Wong" <djwong@us.ibm.com> Cc: Bob Pearson <rpearson@systemfabricworks.com> Cc: Richard Weinberger <richard@nod.at> Cc: Herbert Xu <herbert@gondor.hengli.com.au> Cc: Yann Collet <yann.collet.73@gmail.com> Cc: Kyungsik Lee <kyungsik.lee@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-08 23:01:49 +00:00
typedef struct _U16_S { u16 v; } U16_S;
typedef struct _U32_S { u32 v; } U32_S;
typedef struct _U64_S { u64 v; } U64_S;
decompressor: add LZ4 decompressor module Add support for LZ4 decompression in the Linux Kernel. LZ4 Decompression APIs for kernel are based on LZ4 implementation by Yann Collet. Benchmark Results(PATCH v3) Compiler: Linaro ARM gcc 4.6.2 1. ARMv7, 1.5GHz based board Kernel: linux 3.4 Uncompressed Kernel Size: 14MB Compressed Size Decompression Speed LZO 6.7MB 20.1MB/s, 25.2MB/s(UA) LZ4 7.3MB 29.1MB/s, 45.6MB/s(UA) 2. ARMv7, 1.7GHz based board Kernel: linux 3.7 Uncompressed Kernel Size: 14MB Compressed Size Decompression Speed LZO 6.0MB 34.1MB/s, 52.2MB/s(UA) LZ4 6.5MB 86.7MB/s - UA: Unaligned memory Access support - Latest patch set for LZO applied This patch set is for adding support for LZ4-compressed Kernel. LZ4 is a very fast lossless compression algorithm and it also features an extremely fast decoder [1]. But we have five of decompressors already and one question which does arise, however, is that of where do we stop adding new ones? This issue had been discussed and came to the conclusion [2]. Russell King said that we should have: - one decompressor which is the fastest - one decompressor for the highest compression ratio - one popular decompressor (eg conventional gzip) If we have a replacement one for one of these, then it should do exactly that: replace it. The benchmark shows that an 8% increase in image size vs a 66% increase in decompression speed compared to LZO(which has been known as the fastest decompressor in the Kernel). Therefore the "fast but may not be small" compression title has clearly been taken by LZ4 [3]. [1] http://code.google.com/p/lz4/ [2] http://thread.gmane.org/gmane.linux.kbuild.devel/9157 [3] http://thread.gmane.org/gmane.linux.kbuild.devel/9347 LZ4 homepage: http://fastcompression.blogspot.com/p/lz4.html LZ4 source repository: http://code.google.com/p/lz4/ Signed-off-by: Kyungsik Lee <kyungsik.lee@lge.com> Signed-off-by: Yann Collet <yann.collet.73@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Borislav Petkov <bp@alien8.de> Cc: Florian Fainelli <florian@openwrt.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-08 23:01:45 +00:00
#if defined(CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS) \
|| defined(CONFIG_ARM) && __LINUX_ARM_ARCH__ >= 6 \
&& defined(ARM_EFFICIENT_UNALIGNED_ACCESS)
lib: add lz4 compressor module This patchset is for supporting LZ4 compression and the crypto API using it. As shown below, the size of data is a little bit bigger but compressing speed is faster under the enabled unaligned memory access. We can use lz4 de/compression through crypto API as well. Also, It will be useful for another potential user of lz4 compression. lz4 Compression Benchmark: Compiler: ARM gcc 4.6.4 ARMv7, 1 GHz based board Kernel: linux 3.4 Uncompressed data Size: 101 MB Compressed Size compression Speed LZO 72.1MB 32.1MB/s, 33.0MB/s(UA) LZ4 75.1MB 30.4MB/s, 35.9MB/s(UA) LZ4HC 59.8MB 2.4MB/s, 2.5MB/s(UA) - UA: Unaligned memory Access support - Latest patch set for LZO applied This patch: Add support for LZ4 compression in the Linux Kernel. LZ4 Compression APIs for kernel are based on LZ4 implementation by Yann Collet and were changed for kernel coding style. LZ4 homepage : http://fastcompression.blogspot.com/p/lz4.html LZ4 source repository : http://code.google.com/p/lz4/ svn revision : r90 Two APIs are added: lz4_compress() support basic lz4 compression whereas lz4hc_compress() support high compression or CPU performance get lower but compression ratio get higher. Also, we require the pre-allocated working memory with the defined size and destination buffer must be allocated with the size of lz4_compressbound. [akpm@linux-foundation.org: make lz4_compresshcctx() static] Signed-off-by: Chanho Min <chanho.min@lge.com> Cc: "Darrick J. Wong" <djwong@us.ibm.com> Cc: Bob Pearson <rpearson@systemfabricworks.com> Cc: Richard Weinberger <richard@nod.at> Cc: Herbert Xu <herbert@gondor.hengli.com.au> Cc: Yann Collet <yann.collet.73@gmail.com> Cc: Kyungsik Lee <kyungsik.lee@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-08 23:01:49 +00:00
#define A16(x) (((U16_S *)(x))->v)
decompressor: add LZ4 decompressor module Add support for LZ4 decompression in the Linux Kernel. LZ4 Decompression APIs for kernel are based on LZ4 implementation by Yann Collet. Benchmark Results(PATCH v3) Compiler: Linaro ARM gcc 4.6.2 1. ARMv7, 1.5GHz based board Kernel: linux 3.4 Uncompressed Kernel Size: 14MB Compressed Size Decompression Speed LZO 6.7MB 20.1MB/s, 25.2MB/s(UA) LZ4 7.3MB 29.1MB/s, 45.6MB/s(UA) 2. ARMv7, 1.7GHz based board Kernel: linux 3.7 Uncompressed Kernel Size: 14MB Compressed Size Decompression Speed LZO 6.0MB 34.1MB/s, 52.2MB/s(UA) LZ4 6.5MB 86.7MB/s - UA: Unaligned memory Access support - Latest patch set for LZO applied This patch set is for adding support for LZ4-compressed Kernel. LZ4 is a very fast lossless compression algorithm and it also features an extremely fast decoder [1]. But we have five of decompressors already and one question which does arise, however, is that of where do we stop adding new ones? This issue had been discussed and came to the conclusion [2]. Russell King said that we should have: - one decompressor which is the fastest - one decompressor for the highest compression ratio - one popular decompressor (eg conventional gzip) If we have a replacement one for one of these, then it should do exactly that: replace it. The benchmark shows that an 8% increase in image size vs a 66% increase in decompression speed compared to LZO(which has been known as the fastest decompressor in the Kernel). Therefore the "fast but may not be small" compression title has clearly been taken by LZ4 [3]. [1] http://code.google.com/p/lz4/ [2] http://thread.gmane.org/gmane.linux.kbuild.devel/9157 [3] http://thread.gmane.org/gmane.linux.kbuild.devel/9347 LZ4 homepage: http://fastcompression.blogspot.com/p/lz4.html LZ4 source repository: http://code.google.com/p/lz4/ Signed-off-by: Kyungsik Lee <kyungsik.lee@lge.com> Signed-off-by: Yann Collet <yann.collet.73@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Borislav Petkov <bp@alien8.de> Cc: Florian Fainelli <florian@openwrt.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-08 23:01:45 +00:00
#define A32(x) (((U32_S *)(x))->v)
#define A64(x) (((U64_S *)(x))->v)
#define PUT4(s, d) (A32(d) = A32(s))
#define PUT8(s, d) (A64(d) = A64(s))
lib: add lz4 compressor module This patchset is for supporting LZ4 compression and the crypto API using it. As shown below, the size of data is a little bit bigger but compressing speed is faster under the enabled unaligned memory access. We can use lz4 de/compression through crypto API as well. Also, It will be useful for another potential user of lz4 compression. lz4 Compression Benchmark: Compiler: ARM gcc 4.6.4 ARMv7, 1 GHz based board Kernel: linux 3.4 Uncompressed data Size: 101 MB Compressed Size compression Speed LZO 72.1MB 32.1MB/s, 33.0MB/s(UA) LZ4 75.1MB 30.4MB/s, 35.9MB/s(UA) LZ4HC 59.8MB 2.4MB/s, 2.5MB/s(UA) - UA: Unaligned memory Access support - Latest patch set for LZO applied This patch: Add support for LZ4 compression in the Linux Kernel. LZ4 Compression APIs for kernel are based on LZ4 implementation by Yann Collet and were changed for kernel coding style. LZ4 homepage : http://fastcompression.blogspot.com/p/lz4.html LZ4 source repository : http://code.google.com/p/lz4/ svn revision : r90 Two APIs are added: lz4_compress() support basic lz4 compression whereas lz4hc_compress() support high compression or CPU performance get lower but compression ratio get higher. Also, we require the pre-allocated working memory with the defined size and destination buffer must be allocated with the size of lz4_compressbound. [akpm@linux-foundation.org: make lz4_compresshcctx() static] Signed-off-by: Chanho Min <chanho.min@lge.com> Cc: "Darrick J. Wong" <djwong@us.ibm.com> Cc: Bob Pearson <rpearson@systemfabricworks.com> Cc: Richard Weinberger <richard@nod.at> Cc: Herbert Xu <herbert@gondor.hengli.com.au> Cc: Yann Collet <yann.collet.73@gmail.com> Cc: Kyungsik Lee <kyungsik.lee@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-08 23:01:49 +00:00
#define LZ4_WRITE_LITTLEENDIAN_16(p, v) \
do { \
A16(p) = v; \
p += 2; \
} while (0)
decompressor: add LZ4 decompressor module Add support for LZ4 decompression in the Linux Kernel. LZ4 Decompression APIs for kernel are based on LZ4 implementation by Yann Collet. Benchmark Results(PATCH v3) Compiler: Linaro ARM gcc 4.6.2 1. ARMv7, 1.5GHz based board Kernel: linux 3.4 Uncompressed Kernel Size: 14MB Compressed Size Decompression Speed LZO 6.7MB 20.1MB/s, 25.2MB/s(UA) LZ4 7.3MB 29.1MB/s, 45.6MB/s(UA) 2. ARMv7, 1.7GHz based board Kernel: linux 3.7 Uncompressed Kernel Size: 14MB Compressed Size Decompression Speed LZO 6.0MB 34.1MB/s, 52.2MB/s(UA) LZ4 6.5MB 86.7MB/s - UA: Unaligned memory Access support - Latest patch set for LZO applied This patch set is for adding support for LZ4-compressed Kernel. LZ4 is a very fast lossless compression algorithm and it also features an extremely fast decoder [1]. But we have five of decompressors already and one question which does arise, however, is that of where do we stop adding new ones? This issue had been discussed and came to the conclusion [2]. Russell King said that we should have: - one decompressor which is the fastest - one decompressor for the highest compression ratio - one popular decompressor (eg conventional gzip) If we have a replacement one for one of these, then it should do exactly that: replace it. The benchmark shows that an 8% increase in image size vs a 66% increase in decompression speed compared to LZO(which has been known as the fastest decompressor in the Kernel). Therefore the "fast but may not be small" compression title has clearly been taken by LZ4 [3]. [1] http://code.google.com/p/lz4/ [2] http://thread.gmane.org/gmane.linux.kbuild.devel/9157 [3] http://thread.gmane.org/gmane.linux.kbuild.devel/9347 LZ4 homepage: http://fastcompression.blogspot.com/p/lz4.html LZ4 source repository: http://code.google.com/p/lz4/ Signed-off-by: Kyungsik Lee <kyungsik.lee@lge.com> Signed-off-by: Yann Collet <yann.collet.73@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Borislav Petkov <bp@alien8.de> Cc: Florian Fainelli <florian@openwrt.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-08 23:01:45 +00:00
#else /* CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS */
lib: add lz4 compressor module This patchset is for supporting LZ4 compression and the crypto API using it. As shown below, the size of data is a little bit bigger but compressing speed is faster under the enabled unaligned memory access. We can use lz4 de/compression through crypto API as well. Also, It will be useful for another potential user of lz4 compression. lz4 Compression Benchmark: Compiler: ARM gcc 4.6.4 ARMv7, 1 GHz based board Kernel: linux 3.4 Uncompressed data Size: 101 MB Compressed Size compression Speed LZO 72.1MB 32.1MB/s, 33.0MB/s(UA) LZ4 75.1MB 30.4MB/s, 35.9MB/s(UA) LZ4HC 59.8MB 2.4MB/s, 2.5MB/s(UA) - UA: Unaligned memory Access support - Latest patch set for LZO applied This patch: Add support for LZ4 compression in the Linux Kernel. LZ4 Compression APIs for kernel are based on LZ4 implementation by Yann Collet and were changed for kernel coding style. LZ4 homepage : http://fastcompression.blogspot.com/p/lz4.html LZ4 source repository : http://code.google.com/p/lz4/ svn revision : r90 Two APIs are added: lz4_compress() support basic lz4 compression whereas lz4hc_compress() support high compression or CPU performance get lower but compression ratio get higher. Also, we require the pre-allocated working memory with the defined size and destination buffer must be allocated with the size of lz4_compressbound. [akpm@linux-foundation.org: make lz4_compresshcctx() static] Signed-off-by: Chanho Min <chanho.min@lge.com> Cc: "Darrick J. Wong" <djwong@us.ibm.com> Cc: Bob Pearson <rpearson@systemfabricworks.com> Cc: Richard Weinberger <richard@nod.at> Cc: Herbert Xu <herbert@gondor.hengli.com.au> Cc: Yann Collet <yann.collet.73@gmail.com> Cc: Kyungsik Lee <kyungsik.lee@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-08 23:01:49 +00:00
#define A64(x) get_unaligned((u64 *)&(((U16_S *)(x))->v))
#define A32(x) get_unaligned((u32 *)&(((U16_S *)(x))->v))
#define A16(x) get_unaligned((u16 *)&(((U16_S *)(x))->v))
decompressor: add LZ4 decompressor module Add support for LZ4 decompression in the Linux Kernel. LZ4 Decompression APIs for kernel are based on LZ4 implementation by Yann Collet. Benchmark Results(PATCH v3) Compiler: Linaro ARM gcc 4.6.2 1. ARMv7, 1.5GHz based board Kernel: linux 3.4 Uncompressed Kernel Size: 14MB Compressed Size Decompression Speed LZO 6.7MB 20.1MB/s, 25.2MB/s(UA) LZ4 7.3MB 29.1MB/s, 45.6MB/s(UA) 2. ARMv7, 1.7GHz based board Kernel: linux 3.7 Uncompressed Kernel Size: 14MB Compressed Size Decompression Speed LZO 6.0MB 34.1MB/s, 52.2MB/s(UA) LZ4 6.5MB 86.7MB/s - UA: Unaligned memory Access support - Latest patch set for LZO applied This patch set is for adding support for LZ4-compressed Kernel. LZ4 is a very fast lossless compression algorithm and it also features an extremely fast decoder [1]. But we have five of decompressors already and one question which does arise, however, is that of where do we stop adding new ones? This issue had been discussed and came to the conclusion [2]. Russell King said that we should have: - one decompressor which is the fastest - one decompressor for the highest compression ratio - one popular decompressor (eg conventional gzip) If we have a replacement one for one of these, then it should do exactly that: replace it. The benchmark shows that an 8% increase in image size vs a 66% increase in decompression speed compared to LZO(which has been known as the fastest decompressor in the Kernel). Therefore the "fast but may not be small" compression title has clearly been taken by LZ4 [3]. [1] http://code.google.com/p/lz4/ [2] http://thread.gmane.org/gmane.linux.kbuild.devel/9157 [3] http://thread.gmane.org/gmane.linux.kbuild.devel/9347 LZ4 homepage: http://fastcompression.blogspot.com/p/lz4.html LZ4 source repository: http://code.google.com/p/lz4/ Signed-off-by: Kyungsik Lee <kyungsik.lee@lge.com> Signed-off-by: Yann Collet <yann.collet.73@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Borislav Petkov <bp@alien8.de> Cc: Florian Fainelli <florian@openwrt.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-08 23:01:45 +00:00
#define PUT4(s, d) \
put_unaligned(get_unaligned((const u32 *) s), (u32 *) d)
#define PUT8(s, d) \
put_unaligned(get_unaligned((const u64 *) s), (u64 *) d)
lib: add lz4 compressor module This patchset is for supporting LZ4 compression and the crypto API using it. As shown below, the size of data is a little bit bigger but compressing speed is faster under the enabled unaligned memory access. We can use lz4 de/compression through crypto API as well. Also, It will be useful for another potential user of lz4 compression. lz4 Compression Benchmark: Compiler: ARM gcc 4.6.4 ARMv7, 1 GHz based board Kernel: linux 3.4 Uncompressed data Size: 101 MB Compressed Size compression Speed LZO 72.1MB 32.1MB/s, 33.0MB/s(UA) LZ4 75.1MB 30.4MB/s, 35.9MB/s(UA) LZ4HC 59.8MB 2.4MB/s, 2.5MB/s(UA) - UA: Unaligned memory Access support - Latest patch set for LZO applied This patch: Add support for LZ4 compression in the Linux Kernel. LZ4 Compression APIs for kernel are based on LZ4 implementation by Yann Collet and were changed for kernel coding style. LZ4 homepage : http://fastcompression.blogspot.com/p/lz4.html LZ4 source repository : http://code.google.com/p/lz4/ svn revision : r90 Two APIs are added: lz4_compress() support basic lz4 compression whereas lz4hc_compress() support high compression or CPU performance get lower but compression ratio get higher. Also, we require the pre-allocated working memory with the defined size and destination buffer must be allocated with the size of lz4_compressbound. [akpm@linux-foundation.org: make lz4_compresshcctx() static] Signed-off-by: Chanho Min <chanho.min@lge.com> Cc: "Darrick J. Wong" <djwong@us.ibm.com> Cc: Bob Pearson <rpearson@systemfabricworks.com> Cc: Richard Weinberger <richard@nod.at> Cc: Herbert Xu <herbert@gondor.hengli.com.au> Cc: Yann Collet <yann.collet.73@gmail.com> Cc: Kyungsik Lee <kyungsik.lee@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-08 23:01:49 +00:00
#define LZ4_WRITE_LITTLEENDIAN_16(p, v) \
do { \
put_unaligned(v, (u16 *)(p)); \
p += 2; \
} while (0)
decompressor: add LZ4 decompressor module Add support for LZ4 decompression in the Linux Kernel. LZ4 Decompression APIs for kernel are based on LZ4 implementation by Yann Collet. Benchmark Results(PATCH v3) Compiler: Linaro ARM gcc 4.6.2 1. ARMv7, 1.5GHz based board Kernel: linux 3.4 Uncompressed Kernel Size: 14MB Compressed Size Decompression Speed LZO 6.7MB 20.1MB/s, 25.2MB/s(UA) LZ4 7.3MB 29.1MB/s, 45.6MB/s(UA) 2. ARMv7, 1.7GHz based board Kernel: linux 3.7 Uncompressed Kernel Size: 14MB Compressed Size Decompression Speed LZO 6.0MB 34.1MB/s, 52.2MB/s(UA) LZ4 6.5MB 86.7MB/s - UA: Unaligned memory Access support - Latest patch set for LZO applied This patch set is for adding support for LZ4-compressed Kernel. LZ4 is a very fast lossless compression algorithm and it also features an extremely fast decoder [1]. But we have five of decompressors already and one question which does arise, however, is that of where do we stop adding new ones? This issue had been discussed and came to the conclusion [2]. Russell King said that we should have: - one decompressor which is the fastest - one decompressor for the highest compression ratio - one popular decompressor (eg conventional gzip) If we have a replacement one for one of these, then it should do exactly that: replace it. The benchmark shows that an 8% increase in image size vs a 66% increase in decompression speed compared to LZO(which has been known as the fastest decompressor in the Kernel). Therefore the "fast but may not be small" compression title has clearly been taken by LZ4 [3]. [1] http://code.google.com/p/lz4/ [2] http://thread.gmane.org/gmane.linux.kbuild.devel/9157 [3] http://thread.gmane.org/gmane.linux.kbuild.devel/9347 LZ4 homepage: http://fastcompression.blogspot.com/p/lz4.html LZ4 source repository: http://code.google.com/p/lz4/ Signed-off-by: Kyungsik Lee <kyungsik.lee@lge.com> Signed-off-by: Yann Collet <yann.collet.73@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Borislav Petkov <bp@alien8.de> Cc: Florian Fainelli <florian@openwrt.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-08 23:01:45 +00:00
#endif
#define COPYLENGTH 8
#define ML_BITS 4
#define ML_MASK ((1U << ML_BITS) - 1)
#define RUN_BITS (8 - ML_BITS)
#define RUN_MASK ((1U << RUN_BITS) - 1)
lib: add lz4 compressor module This patchset is for supporting LZ4 compression and the crypto API using it. As shown below, the size of data is a little bit bigger but compressing speed is faster under the enabled unaligned memory access. We can use lz4 de/compression through crypto API as well. Also, It will be useful for another potential user of lz4 compression. lz4 Compression Benchmark: Compiler: ARM gcc 4.6.4 ARMv7, 1 GHz based board Kernel: linux 3.4 Uncompressed data Size: 101 MB Compressed Size compression Speed LZO 72.1MB 32.1MB/s, 33.0MB/s(UA) LZ4 75.1MB 30.4MB/s, 35.9MB/s(UA) LZ4HC 59.8MB 2.4MB/s, 2.5MB/s(UA) - UA: Unaligned memory Access support - Latest patch set for LZO applied This patch: Add support for LZ4 compression in the Linux Kernel. LZ4 Compression APIs for kernel are based on LZ4 implementation by Yann Collet and were changed for kernel coding style. LZ4 homepage : http://fastcompression.blogspot.com/p/lz4.html LZ4 source repository : http://code.google.com/p/lz4/ svn revision : r90 Two APIs are added: lz4_compress() support basic lz4 compression whereas lz4hc_compress() support high compression or CPU performance get lower but compression ratio get higher. Also, we require the pre-allocated working memory with the defined size and destination buffer must be allocated with the size of lz4_compressbound. [akpm@linux-foundation.org: make lz4_compresshcctx() static] Signed-off-by: Chanho Min <chanho.min@lge.com> Cc: "Darrick J. Wong" <djwong@us.ibm.com> Cc: Bob Pearson <rpearson@systemfabricworks.com> Cc: Richard Weinberger <richard@nod.at> Cc: Herbert Xu <herbert@gondor.hengli.com.au> Cc: Yann Collet <yann.collet.73@gmail.com> Cc: Kyungsik Lee <kyungsik.lee@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-08 23:01:49 +00:00
#define MEMORY_USAGE 14
#define MINMATCH 4
#define SKIPSTRENGTH 6
#define LASTLITERALS 5
#define MFLIMIT (COPYLENGTH + MINMATCH)
#define MINLENGTH (MFLIMIT + 1)
#define MAXD_LOG 16
#define MAXD (1 << MAXD_LOG)
#define MAXD_MASK (u32)(MAXD - 1)
#define MAX_DISTANCE (MAXD - 1)
#define HASH_LOG (MAXD_LOG - 1)
#define HASHTABLESIZE (1 << HASH_LOG)
#define MAX_NB_ATTEMPTS 256
#define OPTIMAL_ML (int)((ML_MASK-1)+MINMATCH)
#define LZ4_64KLIMIT ((1<<16) + (MFLIMIT - 1))
#define HASHLOG64K ((MEMORY_USAGE - 2) + 1)
#define HASH64KTABLESIZE (1U << HASHLOG64K)
#define LZ4_HASH_VALUE(p) (((A32(p)) * 2654435761U) >> \
((MINMATCH * 8) - (MEMORY_USAGE-2)))
#define LZ4_HASH64K_VALUE(p) (((A32(p)) * 2654435761U) >> \
((MINMATCH * 8) - HASHLOG64K))
#define HASH_VALUE(p) (((A32(p)) * 2654435761U) >> \
((MINMATCH * 8) - HASH_LOG))
decompressor: add LZ4 decompressor module Add support for LZ4 decompression in the Linux Kernel. LZ4 Decompression APIs for kernel are based on LZ4 implementation by Yann Collet. Benchmark Results(PATCH v3) Compiler: Linaro ARM gcc 4.6.2 1. ARMv7, 1.5GHz based board Kernel: linux 3.4 Uncompressed Kernel Size: 14MB Compressed Size Decompression Speed LZO 6.7MB 20.1MB/s, 25.2MB/s(UA) LZ4 7.3MB 29.1MB/s, 45.6MB/s(UA) 2. ARMv7, 1.7GHz based board Kernel: linux 3.7 Uncompressed Kernel Size: 14MB Compressed Size Decompression Speed LZO 6.0MB 34.1MB/s, 52.2MB/s(UA) LZ4 6.5MB 86.7MB/s - UA: Unaligned memory Access support - Latest patch set for LZO applied This patch set is for adding support for LZ4-compressed Kernel. LZ4 is a very fast lossless compression algorithm and it also features an extremely fast decoder [1]. But we have five of decompressors already and one question which does arise, however, is that of where do we stop adding new ones? This issue had been discussed and came to the conclusion [2]. Russell King said that we should have: - one decompressor which is the fastest - one decompressor for the highest compression ratio - one popular decompressor (eg conventional gzip) If we have a replacement one for one of these, then it should do exactly that: replace it. The benchmark shows that an 8% increase in image size vs a 66% increase in decompression speed compared to LZO(which has been known as the fastest decompressor in the Kernel). Therefore the "fast but may not be small" compression title has clearly been taken by LZ4 [3]. [1] http://code.google.com/p/lz4/ [2] http://thread.gmane.org/gmane.linux.kbuild.devel/9157 [3] http://thread.gmane.org/gmane.linux.kbuild.devel/9347 LZ4 homepage: http://fastcompression.blogspot.com/p/lz4.html LZ4 source repository: http://code.google.com/p/lz4/ Signed-off-by: Kyungsik Lee <kyungsik.lee@lge.com> Signed-off-by: Yann Collet <yann.collet.73@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Borislav Petkov <bp@alien8.de> Cc: Florian Fainelli <florian@openwrt.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-08 23:01:45 +00:00
#if LZ4_ARCH64/* 64-bit */
#define STEPSIZE 8
#define LZ4_COPYSTEP(s, d) \
do { \
PUT8(s, d); \
d += 8; \
s += 8; \
} while (0)
#define LZ4_COPYPACKET(s, d) LZ4_COPYSTEP(s, d)
#define LZ4_SECURECOPY(s, d, e) \
do { \
if (d < e) { \
LZ4_WILDCOPY(s, d, e); \
} \
} while (0)
lib: add lz4 compressor module This patchset is for supporting LZ4 compression and the crypto API using it. As shown below, the size of data is a little bit bigger but compressing speed is faster under the enabled unaligned memory access. We can use lz4 de/compression through crypto API as well. Also, It will be useful for another potential user of lz4 compression. lz4 Compression Benchmark: Compiler: ARM gcc 4.6.4 ARMv7, 1 GHz based board Kernel: linux 3.4 Uncompressed data Size: 101 MB Compressed Size compression Speed LZO 72.1MB 32.1MB/s, 33.0MB/s(UA) LZ4 75.1MB 30.4MB/s, 35.9MB/s(UA) LZ4HC 59.8MB 2.4MB/s, 2.5MB/s(UA) - UA: Unaligned memory Access support - Latest patch set for LZO applied This patch: Add support for LZ4 compression in the Linux Kernel. LZ4 Compression APIs for kernel are based on LZ4 implementation by Yann Collet and were changed for kernel coding style. LZ4 homepage : http://fastcompression.blogspot.com/p/lz4.html LZ4 source repository : http://code.google.com/p/lz4/ svn revision : r90 Two APIs are added: lz4_compress() support basic lz4 compression whereas lz4hc_compress() support high compression or CPU performance get lower but compression ratio get higher. Also, we require the pre-allocated working memory with the defined size and destination buffer must be allocated with the size of lz4_compressbound. [akpm@linux-foundation.org: make lz4_compresshcctx() static] Signed-off-by: Chanho Min <chanho.min@lge.com> Cc: "Darrick J. Wong" <djwong@us.ibm.com> Cc: Bob Pearson <rpearson@systemfabricworks.com> Cc: Richard Weinberger <richard@nod.at> Cc: Herbert Xu <herbert@gondor.hengli.com.au> Cc: Yann Collet <yann.collet.73@gmail.com> Cc: Kyungsik Lee <kyungsik.lee@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-08 23:01:49 +00:00
#define HTYPE u32
#ifdef __BIG_ENDIAN
#define LZ4_NBCOMMONBYTES(val) (__builtin_clzll(val) >> 3)
#else
#define LZ4_NBCOMMONBYTES(val) (__builtin_ctzll(val) >> 3)
#endif
decompressor: add LZ4 decompressor module Add support for LZ4 decompression in the Linux Kernel. LZ4 Decompression APIs for kernel are based on LZ4 implementation by Yann Collet. Benchmark Results(PATCH v3) Compiler: Linaro ARM gcc 4.6.2 1. ARMv7, 1.5GHz based board Kernel: linux 3.4 Uncompressed Kernel Size: 14MB Compressed Size Decompression Speed LZO 6.7MB 20.1MB/s, 25.2MB/s(UA) LZ4 7.3MB 29.1MB/s, 45.6MB/s(UA) 2. ARMv7, 1.7GHz based board Kernel: linux 3.7 Uncompressed Kernel Size: 14MB Compressed Size Decompression Speed LZO 6.0MB 34.1MB/s, 52.2MB/s(UA) LZ4 6.5MB 86.7MB/s - UA: Unaligned memory Access support - Latest patch set for LZO applied This patch set is for adding support for LZ4-compressed Kernel. LZ4 is a very fast lossless compression algorithm and it also features an extremely fast decoder [1]. But we have five of decompressors already and one question which does arise, however, is that of where do we stop adding new ones? This issue had been discussed and came to the conclusion [2]. Russell King said that we should have: - one decompressor which is the fastest - one decompressor for the highest compression ratio - one popular decompressor (eg conventional gzip) If we have a replacement one for one of these, then it should do exactly that: replace it. The benchmark shows that an 8% increase in image size vs a 66% increase in decompression speed compared to LZO(which has been known as the fastest decompressor in the Kernel). Therefore the "fast but may not be small" compression title has clearly been taken by LZ4 [3]. [1] http://code.google.com/p/lz4/ [2] http://thread.gmane.org/gmane.linux.kbuild.devel/9157 [3] http://thread.gmane.org/gmane.linux.kbuild.devel/9347 LZ4 homepage: http://fastcompression.blogspot.com/p/lz4.html LZ4 source repository: http://code.google.com/p/lz4/ Signed-off-by: Kyungsik Lee <kyungsik.lee@lge.com> Signed-off-by: Yann Collet <yann.collet.73@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Borislav Petkov <bp@alien8.de> Cc: Florian Fainelli <florian@openwrt.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-08 23:01:45 +00:00
#else /* 32-bit */
#define STEPSIZE 4
#define LZ4_COPYSTEP(s, d) \
do { \
PUT4(s, d); \
d += 4; \
s += 4; \
} while (0)
#define LZ4_COPYPACKET(s, d) \
do { \
LZ4_COPYSTEP(s, d); \
LZ4_COPYSTEP(s, d); \
} while (0)
#define LZ4_SECURECOPY LZ4_WILDCOPY
lib: add lz4 compressor module This patchset is for supporting LZ4 compression and the crypto API using it. As shown below, the size of data is a little bit bigger but compressing speed is faster under the enabled unaligned memory access. We can use lz4 de/compression through crypto API as well. Also, It will be useful for another potential user of lz4 compression. lz4 Compression Benchmark: Compiler: ARM gcc 4.6.4 ARMv7, 1 GHz based board Kernel: linux 3.4 Uncompressed data Size: 101 MB Compressed Size compression Speed LZO 72.1MB 32.1MB/s, 33.0MB/s(UA) LZ4 75.1MB 30.4MB/s, 35.9MB/s(UA) LZ4HC 59.8MB 2.4MB/s, 2.5MB/s(UA) - UA: Unaligned memory Access support - Latest patch set for LZO applied This patch: Add support for LZ4 compression in the Linux Kernel. LZ4 Compression APIs for kernel are based on LZ4 implementation by Yann Collet and were changed for kernel coding style. LZ4 homepage : http://fastcompression.blogspot.com/p/lz4.html LZ4 source repository : http://code.google.com/p/lz4/ svn revision : r90 Two APIs are added: lz4_compress() support basic lz4 compression whereas lz4hc_compress() support high compression or CPU performance get lower but compression ratio get higher. Also, we require the pre-allocated working memory with the defined size and destination buffer must be allocated with the size of lz4_compressbound. [akpm@linux-foundation.org: make lz4_compresshcctx() static] Signed-off-by: Chanho Min <chanho.min@lge.com> Cc: "Darrick J. Wong" <djwong@us.ibm.com> Cc: Bob Pearson <rpearson@systemfabricworks.com> Cc: Richard Weinberger <richard@nod.at> Cc: Herbert Xu <herbert@gondor.hengli.com.au> Cc: Yann Collet <yann.collet.73@gmail.com> Cc: Kyungsik Lee <kyungsik.lee@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-08 23:01:49 +00:00
#define HTYPE const u8*
#ifdef __BIG_ENDIAN
#define LZ4_NBCOMMONBYTES(val) (__builtin_clz(val) >> 3)
#else
#define LZ4_NBCOMMONBYTES(val) (__builtin_ctz(val) >> 3)
#endif
decompressor: add LZ4 decompressor module Add support for LZ4 decompression in the Linux Kernel. LZ4 Decompression APIs for kernel are based on LZ4 implementation by Yann Collet. Benchmark Results(PATCH v3) Compiler: Linaro ARM gcc 4.6.2 1. ARMv7, 1.5GHz based board Kernel: linux 3.4 Uncompressed Kernel Size: 14MB Compressed Size Decompression Speed LZO 6.7MB 20.1MB/s, 25.2MB/s(UA) LZ4 7.3MB 29.1MB/s, 45.6MB/s(UA) 2. ARMv7, 1.7GHz based board Kernel: linux 3.7 Uncompressed Kernel Size: 14MB Compressed Size Decompression Speed LZO 6.0MB 34.1MB/s, 52.2MB/s(UA) LZ4 6.5MB 86.7MB/s - UA: Unaligned memory Access support - Latest patch set for LZO applied This patch set is for adding support for LZ4-compressed Kernel. LZ4 is a very fast lossless compression algorithm and it also features an extremely fast decoder [1]. But we have five of decompressors already and one question which does arise, however, is that of where do we stop adding new ones? This issue had been discussed and came to the conclusion [2]. Russell King said that we should have: - one decompressor which is the fastest - one decompressor for the highest compression ratio - one popular decompressor (eg conventional gzip) If we have a replacement one for one of these, then it should do exactly that: replace it. The benchmark shows that an 8% increase in image size vs a 66% increase in decompression speed compared to LZO(which has been known as the fastest decompressor in the Kernel). Therefore the "fast but may not be small" compression title has clearly been taken by LZ4 [3]. [1] http://code.google.com/p/lz4/ [2] http://thread.gmane.org/gmane.linux.kbuild.devel/9157 [3] http://thread.gmane.org/gmane.linux.kbuild.devel/9347 LZ4 homepage: http://fastcompression.blogspot.com/p/lz4.html LZ4 source repository: http://code.google.com/p/lz4/ Signed-off-by: Kyungsik Lee <kyungsik.lee@lge.com> Signed-off-by: Yann Collet <yann.collet.73@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Borislav Petkov <bp@alien8.de> Cc: Florian Fainelli <florian@openwrt.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-08 23:01:45 +00:00
#endif
#define LZ4_READ_LITTLEENDIAN_16(d, s, p) \
(d = s - get_unaligned_le16(p))
#define LZ4_WILDCOPY(s, d, e) \
do { \
LZ4_COPYPACKET(s, d); \
} while (d < e)
lib: add lz4 compressor module This patchset is for supporting LZ4 compression and the crypto API using it. As shown below, the size of data is a little bit bigger but compressing speed is faster under the enabled unaligned memory access. We can use lz4 de/compression through crypto API as well. Also, It will be useful for another potential user of lz4 compression. lz4 Compression Benchmark: Compiler: ARM gcc 4.6.4 ARMv7, 1 GHz based board Kernel: linux 3.4 Uncompressed data Size: 101 MB Compressed Size compression Speed LZO 72.1MB 32.1MB/s, 33.0MB/s(UA) LZ4 75.1MB 30.4MB/s, 35.9MB/s(UA) LZ4HC 59.8MB 2.4MB/s, 2.5MB/s(UA) - UA: Unaligned memory Access support - Latest patch set for LZO applied This patch: Add support for LZ4 compression in the Linux Kernel. LZ4 Compression APIs for kernel are based on LZ4 implementation by Yann Collet and were changed for kernel coding style. LZ4 homepage : http://fastcompression.blogspot.com/p/lz4.html LZ4 source repository : http://code.google.com/p/lz4/ svn revision : r90 Two APIs are added: lz4_compress() support basic lz4 compression whereas lz4hc_compress() support high compression or CPU performance get lower but compression ratio get higher. Also, we require the pre-allocated working memory with the defined size and destination buffer must be allocated with the size of lz4_compressbound. [akpm@linux-foundation.org: make lz4_compresshcctx() static] Signed-off-by: Chanho Min <chanho.min@lge.com> Cc: "Darrick J. Wong" <djwong@us.ibm.com> Cc: Bob Pearson <rpearson@systemfabricworks.com> Cc: Richard Weinberger <richard@nod.at> Cc: Herbert Xu <herbert@gondor.hengli.com.au> Cc: Yann Collet <yann.collet.73@gmail.com> Cc: Kyungsik Lee <kyungsik.lee@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-08 23:01:49 +00:00
#define LZ4_BLINDCOPY(s, d, l) \
do { \
u8 *e = (d) + l; \
LZ4_WILDCOPY(s, d, e); \
d = e; \
} while (0)