kernel-ark/arch/x86/xen/enlighten_pv.c

1454 lines
35 KiB
C
Raw Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 14:07:57 +00:00
// SPDX-License-Identifier: GPL-2.0
/*
* Core of Xen paravirt_ops implementation.
*
* This file contains the xen_paravirt_ops structure itself, and the
* implementations for:
* - privileged instructions
* - interrupt flags
* - segment operations
* - booting and setup
*
* Jeremy Fitzhardinge <jeremy@xensource.com>, XenSource Inc, 2007
*/
#include <linux/cpu.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/smp.h>
#include <linux/preempt.h>
#include <linux/hardirq.h>
#include <linux/percpu.h>
#include <linux/delay.h>
#include <linux/start_kernel.h>
#include <linux/sched.h>
#include <linux/kprobes.h>
mm: remove include/linux/bootmem.h Move remaining definitions and declarations from include/linux/bootmem.h into include/linux/memblock.h and remove the redundant header. The includes were replaced with the semantic patch below and then semi-automated removal of duplicated '#include <linux/memblock.h> @@ @@ - #include <linux/bootmem.h> + #include <linux/memblock.h> [sfr@canb.auug.org.au: dma-direct: fix up for the removal of linux/bootmem.h] Link: http://lkml.kernel.org/r/20181002185342.133d1680@canb.auug.org.au [sfr@canb.auug.org.au: powerpc: fix up for removal of linux/bootmem.h] Link: http://lkml.kernel.org/r/20181005161406.73ef8727@canb.auug.org.au [sfr@canb.auug.org.au: x86/kaslr, ACPI/NUMA: fix for linux/bootmem.h removal] Link: http://lkml.kernel.org/r/20181008190341.5e396491@canb.auug.org.au Link: http://lkml.kernel.org/r/1536927045-23536-30-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Jonas Bonn <jonas@southpole.se> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Serge Semin <fancer.lancer@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-30 22:09:49 +00:00
#include <linux/memblock.h>
#include <linux/export.h>
#include <linux/mm.h>
#include <linux/page-flags.h>
#include <linux/highmem.h>
#include <linux/pci.h>
#include <linux/gfp.h>
#include <linux/edd.h>
#include <linux/objtool.h>
#include <xen/xen.h>
#include <xen/events.h>
#include <xen/interface/xen.h>
#include <xen/interface/version.h>
#include <xen/interface/physdev.h>
#include <xen/interface/vcpu.h>
#include <xen/interface/memory.h>
#include <xen/interface/nmi.h>
#include <xen/interface/xen-mca.h>
#include <xen/features.h>
#include <xen/page.h>
#include <xen/hvc-console.h>
#include <xen/acpi.h>
#include <asm/paravirt.h>
#include <asm/apic.h>
#include <asm/page.h>
#include <asm/xen/pci.h>
#include <asm/xen/hypercall.h>
#include <asm/xen/hypervisor.h>
#include <asm/xen/cpuid.h>
#include <asm/fixmap.h>
#include <asm/processor.h>
#include <asm/proto.h>
#include <asm/msr-index.h>
#include <asm/traps.h>
#include <asm/setup.h>
#include <asm/desc.h>
#include <asm/pgalloc.h>
#include <asm/tlbflush.h>
#include <asm/reboot.h>
#include <asm/stackprotector.h>
#include <asm/hypervisor.h>
#include <asm/mach_traps.h>
#include <asm/mwait.h>
#include <asm/pci_x86.h>
#include <asm/cpu.h>
#ifdef CONFIG_X86_IOPL_IOPERM
#include <asm/io_bitmap.h>
#endif
#ifdef CONFIG_ACPI
#include <linux/acpi.h>
#include <asm/acpi.h>
#include <acpi/pdc_intel.h>
#include <acpi/processor.h>
#include <xen/interface/platform.h>
#endif
#include "xen-ops.h"
#include "mmu.h"
#include "smp.h"
#include "multicalls.h"
#include "pmu.h"
#include "../kernel/cpu/cpu.h" /* get_cpu_cap() */
void *xen_initial_gdt;
static int xen_cpu_up_prepare_pv(unsigned int cpu);
static int xen_cpu_dead_pv(unsigned int cpu);
struct tls_descs {
struct desc_struct desc[3];
};
/*
* Updating the 3 TLS descriptors in the GDT on every task switch is
* surprisingly expensive so we avoid updating them if they haven't
* changed. Since Xen writes different descriptors than the one
* passed in the update_descriptor hypercall we keep shadow copies to
* compare against.
*/
static DEFINE_PER_CPU(struct tls_descs, shadow_tls_desc);
static void __init xen_pv_init_platform(void)
{
populate_extra_pte(fix_to_virt(FIX_PARAVIRT_BOOTMAP));
set_fixmap(FIX_PARAVIRT_BOOTMAP, xen_start_info->shared_info);
HYPERVISOR_shared_info = (void *)fix_to_virt(FIX_PARAVIRT_BOOTMAP);
/* xen clock uses per-cpu vcpu_info, need to init it for boot cpu */
xen_vcpu_info_reset(0);
/* pvclock is in shared info area */
xen_init_time_ops();
}
static void __init xen_pv_guest_late_init(void)
{
#ifndef CONFIG_SMP
/* Setup shared vcpu info for non-smp configurations */
xen_setup_vcpu_info_placement();
#endif
}
static __read_mostly unsigned int cpuid_leaf5_ecx_val;
static __read_mostly unsigned int cpuid_leaf5_edx_val;
static void xen_cpuid(unsigned int *ax, unsigned int *bx,
unsigned int *cx, unsigned int *dx)
{
unsigned maskebx = ~0;
/*
* Mask out inconvenient features, to try and disable as many
* unsupported kernel subsystems as possible.
*/
switch (*ax) {
case CPUID_MWAIT_LEAF:
/* Synthesize the values.. */
*ax = 0;
*bx = 0;
*cx = cpuid_leaf5_ecx_val;
*dx = cpuid_leaf5_edx_val;
return;
case 0xb:
/* Suppress extended topology stuff */
maskebx = 0;
break;
}
asm(XEN_EMULATE_PREFIX "cpuid"
: "=a" (*ax),
"=b" (*bx),
"=c" (*cx),
"=d" (*dx)
: "0" (*ax), "2" (*cx));
*bx &= maskebx;
}
STACK_FRAME_NON_STANDARD(xen_cpuid); /* XEN_EMULATE_PREFIX */
static bool __init xen_check_mwait(void)
{
#ifdef CONFIG_ACPI
struct xen_platform_op op = {
.cmd = XENPF_set_processor_pminfo,
.u.set_pminfo.id = -1,
.u.set_pminfo.type = XEN_PM_PDC,
};
uint32_t buf[3];
unsigned int ax, bx, cx, dx;
unsigned int mwait_mask;
/* We need to determine whether it is OK to expose the MWAIT
* capability to the kernel to harvest deeper than C3 states from ACPI
* _CST using the processor_harvest_xen.c module. For this to work, we
* need to gather the MWAIT_LEAF values (which the cstate.c code
* checks against). The hypervisor won't expose the MWAIT flag because
* it would break backwards compatibility; so we will find out directly
* from the hardware and hypercall.
*/
if (!xen_initial_domain())
return false;
/*
* When running under platform earlier than Xen4.2, do not expose
* mwait, to avoid the risk of loading native acpi pad driver
*/
if (!xen_running_on_version_or_later(4, 2))
return false;
ax = 1;
cx = 0;
native_cpuid(&ax, &bx, &cx, &dx);
mwait_mask = (1 << (X86_FEATURE_EST % 32)) |
(1 << (X86_FEATURE_MWAIT % 32));
if ((cx & mwait_mask) != mwait_mask)
return false;
/* We need to emulate the MWAIT_LEAF and for that we need both
* ecx and edx. The hypercall provides only partial information.
*/
ax = CPUID_MWAIT_LEAF;
bx = 0;
cx = 0;
dx = 0;
native_cpuid(&ax, &bx, &cx, &dx);
/* Ask the Hypervisor whether to clear ACPI_PDC_C_C2C3_FFH. If so,
* don't expose MWAIT_LEAF and let ACPI pick the IOPORT version of C3.
*/
buf[0] = ACPI_PDC_REVISION_ID;
buf[1] = 1;
buf[2] = (ACPI_PDC_C_CAPABILITY_SMP | ACPI_PDC_EST_CAPABILITY_SWSMP);
set_xen_guest_handle(op.u.set_pminfo.pdc, buf);
if ((HYPERVISOR_platform_op(&op) == 0) &&
(buf[2] & (ACPI_PDC_C_C1_FFH | ACPI_PDC_C_C2C3_FFH))) {
cpuid_leaf5_ecx_val = cx;
cpuid_leaf5_edx_val = dx;
}
return true;
#else
return false;
#endif
}
static bool __init xen_check_xsave(void)
{
unsigned int cx, xsave_mask;
cx = cpuid_ecx(1);
xsave_mask = (1 << (X86_FEATURE_XSAVE % 32)) |
(1 << (X86_FEATURE_OSXSAVE % 32));
/* Xen will set CR4.OSXSAVE if supported and not disabled by force */
return (cx & xsave_mask) == xsave_mask;
}
static void __init xen_init_capabilities(void)
{
setup_force_cpu_cap(X86_FEATURE_XENPV);
setup_clear_cpu_cap(X86_FEATURE_DCA);
setup_clear_cpu_cap(X86_FEATURE_APERFMPERF);
setup_clear_cpu_cap(X86_FEATURE_MTRR);
setup_clear_cpu_cap(X86_FEATURE_ACC);
setup_clear_cpu_cap(X86_FEATURE_X2APIC);
xen/x86: Remove SME feature in PV guests Xen does not currently support SME for PV guests. Clear the SME CPU capability in order to avoid any ambiguity. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Borislav Petkov <bp@suse.de> Reviewed-by: Juergen Gross <jgross@suse.com> Cc: <xen-devel@lists.xen.org> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brijesh Singh <brijesh.singh@amd.com> Cc: Dave Young <dyoung@redhat.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Larry Woodman <lwoodman@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matt Fleming <matt@codeblueprint.co.uk> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Toshimitsu Kani <toshi.kani@hpe.com> Cc: kasan-dev@googlegroups.com Cc: kvm@vger.kernel.org Cc: linux-arch@vger.kernel.org Cc: linux-doc@vger.kernel.org Cc: linux-efi@vger.kernel.org Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/3b605622a9fae5e588e5a13967120a18ec18071b.1500319216.git.thomas.lendacky@amd.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-07-17 21:10:29 +00:00
setup_clear_cpu_cap(X86_FEATURE_SME);
/*
* Xen PV would need some work to support PCID: CR3 handling as well
* as xen_flush_tlb_others() would need updating.
*/
setup_clear_cpu_cap(X86_FEATURE_PCID);
if (!xen_initial_domain())
setup_clear_cpu_cap(X86_FEATURE_ACPI);
if (xen_check_mwait())
setup_force_cpu_cap(X86_FEATURE_MWAIT);
else
setup_clear_cpu_cap(X86_FEATURE_MWAIT);
if (!xen_check_xsave()) {
setup_clear_cpu_cap(X86_FEATURE_XSAVE);
setup_clear_cpu_cap(X86_FEATURE_OSXSAVE);
}
}
static noinstr void xen_set_debugreg(int reg, unsigned long val)
{
HYPERVISOR_set_debugreg(reg, val);
}
static noinstr unsigned long xen_get_debugreg(int reg)
{
return HYPERVISOR_get_debugreg(reg);
}
static void xen_end_context_switch(struct task_struct *next)
{
xen_mc_flush();
paravirt_end_context_switch(next);
}
static unsigned long xen_store_tr(void)
{
return 0;
}
/*
* Set the page permissions for a particular virtual address. If the
* address is a vmalloc mapping (or other non-linear mapping), then
* find the linear mapping of the page and also set its protections to
* match.
*/
static void set_aliased_prot(void *v, pgprot_t prot)
{
int level;
pte_t *ptep;
pte_t pte;
unsigned long pfn;
unsigned char dummy;
void *va;
ptep = lookup_address((unsigned long)v, &level);
BUG_ON(ptep == NULL);
pfn = pte_pfn(*ptep);
pte = pfn_pte(pfn, prot);
/*
* Careful: update_va_mapping() will fail if the virtual address
* we're poking isn't populated in the page tables. We don't
* need to worry about the direct map (that's always in the page
* tables), but we need to be careful about vmap space. In
* particular, the top level page table can lazily propagate
* entries between processes, so if we've switched mms since we
* vmapped the target in the first place, we might not have the
* top-level page table entry populated.
*
* We disable preemption because we want the same mm active when
* we probe the target and when we issue the hypercall. We'll
* have the same nominal mm, but if we're a kernel thread, lazy
* mm dropping could change our pgd.
*
* Out of an abundance of caution, this uses __get_user() to fault
* in the target address just in case there's some obscure case
* in which the target address isn't readable.
*/
preempt_disable();
copy_from_kernel_nofault(&dummy, v, 1);
if (HYPERVISOR_update_va_mapping((unsigned long)v, pte, 0))
BUG();
va = __va(PFN_PHYS(pfn));
if (va != v && HYPERVISOR_update_va_mapping((unsigned long)va, pte, 0))
BUG();
preempt_enable();
}
static void xen_alloc_ldt(struct desc_struct *ldt, unsigned entries)
{
const unsigned entries_per_page = PAGE_SIZE / LDT_ENTRY_SIZE;
int i;
/*
* We need to mark the all aliases of the LDT pages RO. We
* don't need to call vm_flush_aliases(), though, since that's
* only responsible for flushing aliases out the TLBs, not the
* page tables, and Xen will flush the TLB for us if needed.
*
* To avoid confusing future readers: none of this is necessary
* to load the LDT. The hypervisor only checks this when the
* LDT is faulted in due to subsequent descriptor access.
*/
for (i = 0; i < entries; i += entries_per_page)
set_aliased_prot(ldt + i, PAGE_KERNEL_RO);
}
static void xen_free_ldt(struct desc_struct *ldt, unsigned entries)
{
const unsigned entries_per_page = PAGE_SIZE / LDT_ENTRY_SIZE;
int i;
for (i = 0; i < entries; i += entries_per_page)
set_aliased_prot(ldt + i, PAGE_KERNEL);
}
static void xen_set_ldt(const void *addr, unsigned entries)
{
struct mmuext_op *op;
struct multicall_space mcs = xen_mc_entry(sizeof(*op));
trace_xen_cpu_set_ldt(addr, entries);
op = mcs.args;
op->cmd = MMUEXT_SET_LDT;
op->arg1.linear_addr = (unsigned long)addr;
op->arg2.nr_ents = entries;
MULTI_mmuext_op(mcs.mc, op, 1, NULL, DOMID_SELF);
xen_mc_issue(PARAVIRT_LAZY_CPU);
}
static void xen_load_gdt(const struct desc_ptr *dtr)
{
unsigned long va = dtr->address;
unsigned int size = dtr->size + 1;
unsigned long pfn, mfn;
int level;
pte_t *ptep;
void *virt;
/* @size should be at most GDT_SIZE which is smaller than PAGE_SIZE. */
BUG_ON(size > PAGE_SIZE);
BUG_ON(va & ~PAGE_MASK);
/*
* The GDT is per-cpu and is in the percpu data area.
* That can be virtually mapped, so we need to do a
* page-walk to get the underlying MFN for the
* hypercall. The page can also be in the kernel's
* linear range, so we need to RO that mapping too.
*/
ptep = lookup_address(va, &level);
BUG_ON(ptep == NULL);
pfn = pte_pfn(*ptep);
mfn = pfn_to_mfn(pfn);
virt = __va(PFN_PHYS(pfn));
make_lowmem_page_readonly((void *)va);
make_lowmem_page_readonly(virt);
if (HYPERVISOR_set_gdt(&mfn, size / sizeof(struct desc_struct)))
BUG();
}
/*
* load_gdt for early boot, when the gdt is only mapped once
*/
static void __init xen_load_gdt_boot(const struct desc_ptr *dtr)
{
unsigned long va = dtr->address;
unsigned int size = dtr->size + 1;
unsigned long pfn, mfn;
pte_t pte;
/* @size should be at most GDT_SIZE which is smaller than PAGE_SIZE. */
BUG_ON(size > PAGE_SIZE);
BUG_ON(va & ~PAGE_MASK);
pfn = virt_to_pfn(va);
mfn = pfn_to_mfn(pfn);
pte = pfn_pte(pfn, PAGE_KERNEL_RO);
if (HYPERVISOR_update_va_mapping((unsigned long)va, pte, 0))
BUG();
if (HYPERVISOR_set_gdt(&mfn, size / sizeof(struct desc_struct)))
BUG();
}
static inline bool desc_equal(const struct desc_struct *d1,
const struct desc_struct *d2)
{
return !memcmp(d1, d2, sizeof(*d1));
}
static void load_TLS_descriptor(struct thread_struct *t,
unsigned int cpu, unsigned int i)
{
struct desc_struct *shadow = &per_cpu(shadow_tls_desc, cpu).desc[i];
struct desc_struct *gdt;
xmaddr_t maddr;
struct multicall_space mc;
if (desc_equal(shadow, &t->tls_array[i]))
return;
*shadow = t->tls_array[i];
gdt = get_cpu_gdt_rw(cpu);
maddr = arbitrary_virt_to_machine(&gdt[GDT_ENTRY_TLS_MIN+i]);
mc = __xen_mc_entry(0);
MULTI_update_descriptor(mc.mc, maddr.maddr, t->tls_array[i]);
}
static void xen_load_tls(struct thread_struct *t, unsigned int cpu)
{
/*
* In lazy mode we need to zero %fs, otherwise we may get an
* exception between the new %fs descriptor being loaded and
* %fs being effectively cleared at __switch_to().
*/
if (paravirt_get_lazy_mode() == PARAVIRT_LAZY_CPU)
loadsegment(fs, 0);
xen_mc_batch();
load_TLS_descriptor(t, cpu, 0);
load_TLS_descriptor(t, cpu, 1);
load_TLS_descriptor(t, cpu, 2);
xen_mc_issue(PARAVIRT_LAZY_CPU);
}
static void xen_load_gs_index(unsigned int idx)
{
if (HYPERVISOR_set_segment_base(SEGBASE_GS_USER_SEL, idx))
BUG();
}
static void xen_write_ldt_entry(struct desc_struct *dt, int entrynum,
const void *ptr)
{
xmaddr_t mach_lp = arbitrary_virt_to_machine(&dt[entrynum]);
u64 entry = *(u64 *)ptr;
trace_xen_cpu_write_ldt_entry(dt, entrynum, entry);
preempt_disable();
xen_mc_flush();
if (HYPERVISOR_update_descriptor(mach_lp.maddr, entry))
BUG();
preempt_enable();
}
void noist_exc_debug(struct pt_regs *regs);
DEFINE_IDTENTRY_RAW(xenpv_exc_nmi)
{
/* On Xen PV, NMI doesn't use IST. The C part is the same as native. */
exc_nmi(regs);
}
DEFINE_IDTENTRY_RAW_ERRORCODE(xenpv_exc_double_fault)
{
/* On Xen PV, DF doesn't use IST. The C part is the same as native. */
exc_double_fault(regs, error_code);
}
DEFINE_IDTENTRY_RAW(xenpv_exc_debug)
{
/*
* There's no IST on Xen PV, but we still need to dispatch
* to the correct handler.
*/
if (user_mode(regs))
noist_exc_debug(regs);
else
exc_debug(regs);
}
x86/xen: avoid warning in Xen pv guest with CONFIG_AMD_MEM_ENCRYPT enabled When booting a kernel which has been built with CONFIG_AMD_MEM_ENCRYPT enabled as a Xen pv guest a warning is issued for each processor: [ 5.964347] ------------[ cut here ]------------ [ 5.968314] WARNING: CPU: 0 PID: 1 at /home/gross/linux/head/arch/x86/xen/enlighten_pv.c:660 get_trap_addr+0x59/0x90 [ 5.972321] Modules linked in: [ 5.976313] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 5.11.0-rc5-default #75 [ 5.980313] Hardware name: Dell Inc. OptiPlex 9020/0PC5F7, BIOS A05 12/05/2013 [ 5.984313] RIP: e030:get_trap_addr+0x59/0x90 [ 5.988313] Code: 42 10 83 f0 01 85 f6 74 04 84 c0 75 1d b8 01 00 00 00 c3 48 3d 00 80 83 82 72 08 48 3d 20 81 83 82 72 0c b8 01 00 00 00 eb db <0f> 0b 31 c0 c3 48 2d 00 80 83 82 48 ba 72 1c c7 71 1c c7 71 1c 48 [ 5.992313] RSP: e02b:ffffc90040033d38 EFLAGS: 00010202 [ 5.996313] RAX: 0000000000000001 RBX: ffffffff82a141d0 RCX: ffffffff8222ec38 [ 6.000312] RDX: ffffffff8222ec38 RSI: 0000000000000005 RDI: ffffc90040033d40 [ 6.004313] RBP: ffff8881003984a0 R08: 0000000000000007 R09: ffff888100398000 [ 6.008312] R10: 0000000000000007 R11: ffffc90040246000 R12: ffff8884082182a8 [ 6.012313] R13: 0000000000000100 R14: 000000000000001d R15: ffff8881003982d0 [ 6.016316] FS: 0000000000000000(0000) GS:ffff888408200000(0000) knlGS:0000000000000000 [ 6.020313] CS: e030 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 6.024313] CR2: ffffc900020ef000 CR3: 000000000220a000 CR4: 0000000000050660 [ 6.028314] Call Trace: [ 6.032313] cvt_gate_to_trap.part.7+0x3f/0x90 [ 6.036313] ? asm_exc_double_fault+0x30/0x30 [ 6.040313] xen_convert_trap_info+0x87/0xd0 [ 6.044313] xen_pv_cpu_up+0x17a/0x450 [ 6.048313] bringup_cpu+0x2b/0xc0 [ 6.052313] ? cpus_read_trylock+0x50/0x50 [ 6.056313] cpuhp_invoke_callback+0x80/0x4c0 [ 6.060313] _cpu_up+0xa7/0x140 [ 6.064313] cpu_up+0x98/0xd0 [ 6.068313] bringup_nonboot_cpus+0x4f/0x60 [ 6.072313] smp_init+0x26/0x79 [ 6.076313] kernel_init_freeable+0x103/0x258 [ 6.080313] ? rest_init+0xd0/0xd0 [ 6.084313] kernel_init+0xa/0x110 [ 6.088313] ret_from_fork+0x1f/0x30 [ 6.092313] ---[ end trace be9ecf17dceeb4f3 ]--- Reason is that there is no Xen pv trap entry for X86_TRAP_VC. Fix that by adding a generic trap handler for unknown traps and wire all unknown bare metal handlers to this generic handler, which will just crash the system in case such a trap will ever happen. Fixes: 0786138c78e793 ("x86/sev-es: Add a Runtime #VC Exception Handler") Cc: <stable@vger.kernel.org> # v5.10 Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2021-01-25 13:42:07 +00:00
DEFINE_IDTENTRY_RAW(exc_xen_unknown_trap)
{
/* This should never happen and there is no way to handle it. */
instrumentation_begin();
x86/xen: avoid warning in Xen pv guest with CONFIG_AMD_MEM_ENCRYPT enabled When booting a kernel which has been built with CONFIG_AMD_MEM_ENCRYPT enabled as a Xen pv guest a warning is issued for each processor: [ 5.964347] ------------[ cut here ]------------ [ 5.968314] WARNING: CPU: 0 PID: 1 at /home/gross/linux/head/arch/x86/xen/enlighten_pv.c:660 get_trap_addr+0x59/0x90 [ 5.972321] Modules linked in: [ 5.976313] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 5.11.0-rc5-default #75 [ 5.980313] Hardware name: Dell Inc. OptiPlex 9020/0PC5F7, BIOS A05 12/05/2013 [ 5.984313] RIP: e030:get_trap_addr+0x59/0x90 [ 5.988313] Code: 42 10 83 f0 01 85 f6 74 04 84 c0 75 1d b8 01 00 00 00 c3 48 3d 00 80 83 82 72 08 48 3d 20 81 83 82 72 0c b8 01 00 00 00 eb db <0f> 0b 31 c0 c3 48 2d 00 80 83 82 48 ba 72 1c c7 71 1c c7 71 1c 48 [ 5.992313] RSP: e02b:ffffc90040033d38 EFLAGS: 00010202 [ 5.996313] RAX: 0000000000000001 RBX: ffffffff82a141d0 RCX: ffffffff8222ec38 [ 6.000312] RDX: ffffffff8222ec38 RSI: 0000000000000005 RDI: ffffc90040033d40 [ 6.004313] RBP: ffff8881003984a0 R08: 0000000000000007 R09: ffff888100398000 [ 6.008312] R10: 0000000000000007 R11: ffffc90040246000 R12: ffff8884082182a8 [ 6.012313] R13: 0000000000000100 R14: 000000000000001d R15: ffff8881003982d0 [ 6.016316] FS: 0000000000000000(0000) GS:ffff888408200000(0000) knlGS:0000000000000000 [ 6.020313] CS: e030 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 6.024313] CR2: ffffc900020ef000 CR3: 000000000220a000 CR4: 0000000000050660 [ 6.028314] Call Trace: [ 6.032313] cvt_gate_to_trap.part.7+0x3f/0x90 [ 6.036313] ? asm_exc_double_fault+0x30/0x30 [ 6.040313] xen_convert_trap_info+0x87/0xd0 [ 6.044313] xen_pv_cpu_up+0x17a/0x450 [ 6.048313] bringup_cpu+0x2b/0xc0 [ 6.052313] ? cpus_read_trylock+0x50/0x50 [ 6.056313] cpuhp_invoke_callback+0x80/0x4c0 [ 6.060313] _cpu_up+0xa7/0x140 [ 6.064313] cpu_up+0x98/0xd0 [ 6.068313] bringup_nonboot_cpus+0x4f/0x60 [ 6.072313] smp_init+0x26/0x79 [ 6.076313] kernel_init_freeable+0x103/0x258 [ 6.080313] ? rest_init+0xd0/0xd0 [ 6.084313] kernel_init+0xa/0x110 [ 6.088313] ret_from_fork+0x1f/0x30 [ 6.092313] ---[ end trace be9ecf17dceeb4f3 ]--- Reason is that there is no Xen pv trap entry for X86_TRAP_VC. Fix that by adding a generic trap handler for unknown traps and wire all unknown bare metal handlers to this generic handler, which will just crash the system in case such a trap will ever happen. Fixes: 0786138c78e793 ("x86/sev-es: Add a Runtime #VC Exception Handler") Cc: <stable@vger.kernel.org> # v5.10 Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2021-01-25 13:42:07 +00:00
pr_err("Unknown trap in Xen PV mode.");
BUG();
instrumentation_end();
x86/xen: avoid warning in Xen pv guest with CONFIG_AMD_MEM_ENCRYPT enabled When booting a kernel which has been built with CONFIG_AMD_MEM_ENCRYPT enabled as a Xen pv guest a warning is issued for each processor: [ 5.964347] ------------[ cut here ]------------ [ 5.968314] WARNING: CPU: 0 PID: 1 at /home/gross/linux/head/arch/x86/xen/enlighten_pv.c:660 get_trap_addr+0x59/0x90 [ 5.972321] Modules linked in: [ 5.976313] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 5.11.0-rc5-default #75 [ 5.980313] Hardware name: Dell Inc. OptiPlex 9020/0PC5F7, BIOS A05 12/05/2013 [ 5.984313] RIP: e030:get_trap_addr+0x59/0x90 [ 5.988313] Code: 42 10 83 f0 01 85 f6 74 04 84 c0 75 1d b8 01 00 00 00 c3 48 3d 00 80 83 82 72 08 48 3d 20 81 83 82 72 0c b8 01 00 00 00 eb db <0f> 0b 31 c0 c3 48 2d 00 80 83 82 48 ba 72 1c c7 71 1c c7 71 1c 48 [ 5.992313] RSP: e02b:ffffc90040033d38 EFLAGS: 00010202 [ 5.996313] RAX: 0000000000000001 RBX: ffffffff82a141d0 RCX: ffffffff8222ec38 [ 6.000312] RDX: ffffffff8222ec38 RSI: 0000000000000005 RDI: ffffc90040033d40 [ 6.004313] RBP: ffff8881003984a0 R08: 0000000000000007 R09: ffff888100398000 [ 6.008312] R10: 0000000000000007 R11: ffffc90040246000 R12: ffff8884082182a8 [ 6.012313] R13: 0000000000000100 R14: 000000000000001d R15: ffff8881003982d0 [ 6.016316] FS: 0000000000000000(0000) GS:ffff888408200000(0000) knlGS:0000000000000000 [ 6.020313] CS: e030 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 6.024313] CR2: ffffc900020ef000 CR3: 000000000220a000 CR4: 0000000000050660 [ 6.028314] Call Trace: [ 6.032313] cvt_gate_to_trap.part.7+0x3f/0x90 [ 6.036313] ? asm_exc_double_fault+0x30/0x30 [ 6.040313] xen_convert_trap_info+0x87/0xd0 [ 6.044313] xen_pv_cpu_up+0x17a/0x450 [ 6.048313] bringup_cpu+0x2b/0xc0 [ 6.052313] ? cpus_read_trylock+0x50/0x50 [ 6.056313] cpuhp_invoke_callback+0x80/0x4c0 [ 6.060313] _cpu_up+0xa7/0x140 [ 6.064313] cpu_up+0x98/0xd0 [ 6.068313] bringup_nonboot_cpus+0x4f/0x60 [ 6.072313] smp_init+0x26/0x79 [ 6.076313] kernel_init_freeable+0x103/0x258 [ 6.080313] ? rest_init+0xd0/0xd0 [ 6.084313] kernel_init+0xa/0x110 [ 6.088313] ret_from_fork+0x1f/0x30 [ 6.092313] ---[ end trace be9ecf17dceeb4f3 ]--- Reason is that there is no Xen pv trap entry for X86_TRAP_VC. Fix that by adding a generic trap handler for unknown traps and wire all unknown bare metal handlers to this generic handler, which will just crash the system in case such a trap will ever happen. Fixes: 0786138c78e793 ("x86/sev-es: Add a Runtime #VC Exception Handler") Cc: <stable@vger.kernel.org> # v5.10 Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2021-01-25 13:42:07 +00:00
}
#ifdef CONFIG_X86_MCE
DEFINE_IDTENTRY_RAW(xenpv_exc_machine_check)
{
/*
* There's no IST on Xen PV, but we still need to dispatch
* to the correct handler.
*/
if (user_mode(regs))
noist_exc_machine_check(regs);
else
exc_machine_check(regs);
}
#endif
struct trap_array_entry {
void (*orig)(void);
void (*xen)(void);
bool ist_okay;
};
#define TRAP_ENTRY(func, ist_ok) { \
.orig = asm_##func, \
.xen = xen_asm_##func, \
.ist_okay = ist_ok }
#define TRAP_ENTRY_REDIR(func, ist_ok) { \
.orig = asm_##func, \
.xen = xen_asm_xenpv_##func, \
.ist_okay = ist_ok }
static struct trap_array_entry trap_array[] = {
TRAP_ENTRY_REDIR(exc_debug, true ),
TRAP_ENTRY_REDIR(exc_double_fault, true ),
#ifdef CONFIG_X86_MCE
TRAP_ENTRY_REDIR(exc_machine_check, true ),
#endif
TRAP_ENTRY_REDIR(exc_nmi, true ),
TRAP_ENTRY(exc_int3, false ),
TRAP_ENTRY(exc_overflow, false ),
#ifdef CONFIG_IA32_EMULATION
{ entry_INT80_compat, xen_entry_INT80_compat, false },
#endif
TRAP_ENTRY(exc_page_fault, false ),
TRAP_ENTRY(exc_divide_error, false ),
TRAP_ENTRY(exc_bounds, false ),
TRAP_ENTRY(exc_invalid_op, false ),
TRAP_ENTRY(exc_device_not_available, false ),
TRAP_ENTRY(exc_coproc_segment_overrun, false ),
TRAP_ENTRY(exc_invalid_tss, false ),
TRAP_ENTRY(exc_segment_not_present, false ),
TRAP_ENTRY(exc_stack_segment, false ),
TRAP_ENTRY(exc_general_protection, false ),
TRAP_ENTRY(exc_spurious_interrupt_bug, false ),
TRAP_ENTRY(exc_coprocessor_error, false ),
TRAP_ENTRY(exc_alignment_check, false ),
TRAP_ENTRY(exc_simd_coprocessor_error, false ),
};
static bool __ref get_trap_addr(void **addr, unsigned int ist)
{
unsigned int nr;
bool ist_okay = false;
x86/xen: avoid warning in Xen pv guest with CONFIG_AMD_MEM_ENCRYPT enabled When booting a kernel which has been built with CONFIG_AMD_MEM_ENCRYPT enabled as a Xen pv guest a warning is issued for each processor: [ 5.964347] ------------[ cut here ]------------ [ 5.968314] WARNING: CPU: 0 PID: 1 at /home/gross/linux/head/arch/x86/xen/enlighten_pv.c:660 get_trap_addr+0x59/0x90 [ 5.972321] Modules linked in: [ 5.976313] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 5.11.0-rc5-default #75 [ 5.980313] Hardware name: Dell Inc. OptiPlex 9020/0PC5F7, BIOS A05 12/05/2013 [ 5.984313] RIP: e030:get_trap_addr+0x59/0x90 [ 5.988313] Code: 42 10 83 f0 01 85 f6 74 04 84 c0 75 1d b8 01 00 00 00 c3 48 3d 00 80 83 82 72 08 48 3d 20 81 83 82 72 0c b8 01 00 00 00 eb db <0f> 0b 31 c0 c3 48 2d 00 80 83 82 48 ba 72 1c c7 71 1c c7 71 1c 48 [ 5.992313] RSP: e02b:ffffc90040033d38 EFLAGS: 00010202 [ 5.996313] RAX: 0000000000000001 RBX: ffffffff82a141d0 RCX: ffffffff8222ec38 [ 6.000312] RDX: ffffffff8222ec38 RSI: 0000000000000005 RDI: ffffc90040033d40 [ 6.004313] RBP: ffff8881003984a0 R08: 0000000000000007 R09: ffff888100398000 [ 6.008312] R10: 0000000000000007 R11: ffffc90040246000 R12: ffff8884082182a8 [ 6.012313] R13: 0000000000000100 R14: 000000000000001d R15: ffff8881003982d0 [ 6.016316] FS: 0000000000000000(0000) GS:ffff888408200000(0000) knlGS:0000000000000000 [ 6.020313] CS: e030 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 6.024313] CR2: ffffc900020ef000 CR3: 000000000220a000 CR4: 0000000000050660 [ 6.028314] Call Trace: [ 6.032313] cvt_gate_to_trap.part.7+0x3f/0x90 [ 6.036313] ? asm_exc_double_fault+0x30/0x30 [ 6.040313] xen_convert_trap_info+0x87/0xd0 [ 6.044313] xen_pv_cpu_up+0x17a/0x450 [ 6.048313] bringup_cpu+0x2b/0xc0 [ 6.052313] ? cpus_read_trylock+0x50/0x50 [ 6.056313] cpuhp_invoke_callback+0x80/0x4c0 [ 6.060313] _cpu_up+0xa7/0x140 [ 6.064313] cpu_up+0x98/0xd0 [ 6.068313] bringup_nonboot_cpus+0x4f/0x60 [ 6.072313] smp_init+0x26/0x79 [ 6.076313] kernel_init_freeable+0x103/0x258 [ 6.080313] ? rest_init+0xd0/0xd0 [ 6.084313] kernel_init+0xa/0x110 [ 6.088313] ret_from_fork+0x1f/0x30 [ 6.092313] ---[ end trace be9ecf17dceeb4f3 ]--- Reason is that there is no Xen pv trap entry for X86_TRAP_VC. Fix that by adding a generic trap handler for unknown traps and wire all unknown bare metal handlers to this generic handler, which will just crash the system in case such a trap will ever happen. Fixes: 0786138c78e793 ("x86/sev-es: Add a Runtime #VC Exception Handler") Cc: <stable@vger.kernel.org> # v5.10 Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2021-01-25 13:42:07 +00:00
bool found = false;
/*
* Replace trap handler addresses by Xen specific ones.
* Check for known traps using IST and whitelist them.
* The debugger ones are the only ones we care about.
* Xen will handle faults like double_fault, so we should never see
* them. Warn if there's an unexpected IST-using fault handler.
*/
for (nr = 0; nr < ARRAY_SIZE(trap_array); nr++) {
struct trap_array_entry *entry = trap_array + nr;
if (*addr == entry->orig) {
*addr = entry->xen;
ist_okay = entry->ist_okay;
x86/xen: avoid warning in Xen pv guest with CONFIG_AMD_MEM_ENCRYPT enabled When booting a kernel which has been built with CONFIG_AMD_MEM_ENCRYPT enabled as a Xen pv guest a warning is issued for each processor: [ 5.964347] ------------[ cut here ]------------ [ 5.968314] WARNING: CPU: 0 PID: 1 at /home/gross/linux/head/arch/x86/xen/enlighten_pv.c:660 get_trap_addr+0x59/0x90 [ 5.972321] Modules linked in: [ 5.976313] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 5.11.0-rc5-default #75 [ 5.980313] Hardware name: Dell Inc. OptiPlex 9020/0PC5F7, BIOS A05 12/05/2013 [ 5.984313] RIP: e030:get_trap_addr+0x59/0x90 [ 5.988313] Code: 42 10 83 f0 01 85 f6 74 04 84 c0 75 1d b8 01 00 00 00 c3 48 3d 00 80 83 82 72 08 48 3d 20 81 83 82 72 0c b8 01 00 00 00 eb db <0f> 0b 31 c0 c3 48 2d 00 80 83 82 48 ba 72 1c c7 71 1c c7 71 1c 48 [ 5.992313] RSP: e02b:ffffc90040033d38 EFLAGS: 00010202 [ 5.996313] RAX: 0000000000000001 RBX: ffffffff82a141d0 RCX: ffffffff8222ec38 [ 6.000312] RDX: ffffffff8222ec38 RSI: 0000000000000005 RDI: ffffc90040033d40 [ 6.004313] RBP: ffff8881003984a0 R08: 0000000000000007 R09: ffff888100398000 [ 6.008312] R10: 0000000000000007 R11: ffffc90040246000 R12: ffff8884082182a8 [ 6.012313] R13: 0000000000000100 R14: 000000000000001d R15: ffff8881003982d0 [ 6.016316] FS: 0000000000000000(0000) GS:ffff888408200000(0000) knlGS:0000000000000000 [ 6.020313] CS: e030 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 6.024313] CR2: ffffc900020ef000 CR3: 000000000220a000 CR4: 0000000000050660 [ 6.028314] Call Trace: [ 6.032313] cvt_gate_to_trap.part.7+0x3f/0x90 [ 6.036313] ? asm_exc_double_fault+0x30/0x30 [ 6.040313] xen_convert_trap_info+0x87/0xd0 [ 6.044313] xen_pv_cpu_up+0x17a/0x450 [ 6.048313] bringup_cpu+0x2b/0xc0 [ 6.052313] ? cpus_read_trylock+0x50/0x50 [ 6.056313] cpuhp_invoke_callback+0x80/0x4c0 [ 6.060313] _cpu_up+0xa7/0x140 [ 6.064313] cpu_up+0x98/0xd0 [ 6.068313] bringup_nonboot_cpus+0x4f/0x60 [ 6.072313] smp_init+0x26/0x79 [ 6.076313] kernel_init_freeable+0x103/0x258 [ 6.080313] ? rest_init+0xd0/0xd0 [ 6.084313] kernel_init+0xa/0x110 [ 6.088313] ret_from_fork+0x1f/0x30 [ 6.092313] ---[ end trace be9ecf17dceeb4f3 ]--- Reason is that there is no Xen pv trap entry for X86_TRAP_VC. Fix that by adding a generic trap handler for unknown traps and wire all unknown bare metal handlers to this generic handler, which will just crash the system in case such a trap will ever happen. Fixes: 0786138c78e793 ("x86/sev-es: Add a Runtime #VC Exception Handler") Cc: <stable@vger.kernel.org> # v5.10 Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2021-01-25 13:42:07 +00:00
found = true;
break;
}
}
if (nr == ARRAY_SIZE(trap_array) &&
*addr >= (void *)early_idt_handler_array[0] &&
*addr < (void *)early_idt_handler_array[NUM_EXCEPTION_VECTORS]) {
nr = (*addr - (void *)early_idt_handler_array[0]) /
EARLY_IDT_HANDLER_SIZE;
*addr = (void *)xen_early_idt_handler_array[nr];
x86/xen: avoid warning in Xen pv guest with CONFIG_AMD_MEM_ENCRYPT enabled When booting a kernel which has been built with CONFIG_AMD_MEM_ENCRYPT enabled as a Xen pv guest a warning is issued for each processor: [ 5.964347] ------------[ cut here ]------------ [ 5.968314] WARNING: CPU: 0 PID: 1 at /home/gross/linux/head/arch/x86/xen/enlighten_pv.c:660 get_trap_addr+0x59/0x90 [ 5.972321] Modules linked in: [ 5.976313] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 5.11.0-rc5-default #75 [ 5.980313] Hardware name: Dell Inc. OptiPlex 9020/0PC5F7, BIOS A05 12/05/2013 [ 5.984313] RIP: e030:get_trap_addr+0x59/0x90 [ 5.988313] Code: 42 10 83 f0 01 85 f6 74 04 84 c0 75 1d b8 01 00 00 00 c3 48 3d 00 80 83 82 72 08 48 3d 20 81 83 82 72 0c b8 01 00 00 00 eb db <0f> 0b 31 c0 c3 48 2d 00 80 83 82 48 ba 72 1c c7 71 1c c7 71 1c 48 [ 5.992313] RSP: e02b:ffffc90040033d38 EFLAGS: 00010202 [ 5.996313] RAX: 0000000000000001 RBX: ffffffff82a141d0 RCX: ffffffff8222ec38 [ 6.000312] RDX: ffffffff8222ec38 RSI: 0000000000000005 RDI: ffffc90040033d40 [ 6.004313] RBP: ffff8881003984a0 R08: 0000000000000007 R09: ffff888100398000 [ 6.008312] R10: 0000000000000007 R11: ffffc90040246000 R12: ffff8884082182a8 [ 6.012313] R13: 0000000000000100 R14: 000000000000001d R15: ffff8881003982d0 [ 6.016316] FS: 0000000000000000(0000) GS:ffff888408200000(0000) knlGS:0000000000000000 [ 6.020313] CS: e030 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 6.024313] CR2: ffffc900020ef000 CR3: 000000000220a000 CR4: 0000000000050660 [ 6.028314] Call Trace: [ 6.032313] cvt_gate_to_trap.part.7+0x3f/0x90 [ 6.036313] ? asm_exc_double_fault+0x30/0x30 [ 6.040313] xen_convert_trap_info+0x87/0xd0 [ 6.044313] xen_pv_cpu_up+0x17a/0x450 [ 6.048313] bringup_cpu+0x2b/0xc0 [ 6.052313] ? cpus_read_trylock+0x50/0x50 [ 6.056313] cpuhp_invoke_callback+0x80/0x4c0 [ 6.060313] _cpu_up+0xa7/0x140 [ 6.064313] cpu_up+0x98/0xd0 [ 6.068313] bringup_nonboot_cpus+0x4f/0x60 [ 6.072313] smp_init+0x26/0x79 [ 6.076313] kernel_init_freeable+0x103/0x258 [ 6.080313] ? rest_init+0xd0/0xd0 [ 6.084313] kernel_init+0xa/0x110 [ 6.088313] ret_from_fork+0x1f/0x30 [ 6.092313] ---[ end trace be9ecf17dceeb4f3 ]--- Reason is that there is no Xen pv trap entry for X86_TRAP_VC. Fix that by adding a generic trap handler for unknown traps and wire all unknown bare metal handlers to this generic handler, which will just crash the system in case such a trap will ever happen. Fixes: 0786138c78e793 ("x86/sev-es: Add a Runtime #VC Exception Handler") Cc: <stable@vger.kernel.org> # v5.10 Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2021-01-25 13:42:07 +00:00
found = true;
}
x86/xen: avoid warning in Xen pv guest with CONFIG_AMD_MEM_ENCRYPT enabled When booting a kernel which has been built with CONFIG_AMD_MEM_ENCRYPT enabled as a Xen pv guest a warning is issued for each processor: [ 5.964347] ------------[ cut here ]------------ [ 5.968314] WARNING: CPU: 0 PID: 1 at /home/gross/linux/head/arch/x86/xen/enlighten_pv.c:660 get_trap_addr+0x59/0x90 [ 5.972321] Modules linked in: [ 5.976313] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 5.11.0-rc5-default #75 [ 5.980313] Hardware name: Dell Inc. OptiPlex 9020/0PC5F7, BIOS A05 12/05/2013 [ 5.984313] RIP: e030:get_trap_addr+0x59/0x90 [ 5.988313] Code: 42 10 83 f0 01 85 f6 74 04 84 c0 75 1d b8 01 00 00 00 c3 48 3d 00 80 83 82 72 08 48 3d 20 81 83 82 72 0c b8 01 00 00 00 eb db <0f> 0b 31 c0 c3 48 2d 00 80 83 82 48 ba 72 1c c7 71 1c c7 71 1c 48 [ 5.992313] RSP: e02b:ffffc90040033d38 EFLAGS: 00010202 [ 5.996313] RAX: 0000000000000001 RBX: ffffffff82a141d0 RCX: ffffffff8222ec38 [ 6.000312] RDX: ffffffff8222ec38 RSI: 0000000000000005 RDI: ffffc90040033d40 [ 6.004313] RBP: ffff8881003984a0 R08: 0000000000000007 R09: ffff888100398000 [ 6.008312] R10: 0000000000000007 R11: ffffc90040246000 R12: ffff8884082182a8 [ 6.012313] R13: 0000000000000100 R14: 000000000000001d R15: ffff8881003982d0 [ 6.016316] FS: 0000000000000000(0000) GS:ffff888408200000(0000) knlGS:0000000000000000 [ 6.020313] CS: e030 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 6.024313] CR2: ffffc900020ef000 CR3: 000000000220a000 CR4: 0000000000050660 [ 6.028314] Call Trace: [ 6.032313] cvt_gate_to_trap.part.7+0x3f/0x90 [ 6.036313] ? asm_exc_double_fault+0x30/0x30 [ 6.040313] xen_convert_trap_info+0x87/0xd0 [ 6.044313] xen_pv_cpu_up+0x17a/0x450 [ 6.048313] bringup_cpu+0x2b/0xc0 [ 6.052313] ? cpus_read_trylock+0x50/0x50 [ 6.056313] cpuhp_invoke_callback+0x80/0x4c0 [ 6.060313] _cpu_up+0xa7/0x140 [ 6.064313] cpu_up+0x98/0xd0 [ 6.068313] bringup_nonboot_cpus+0x4f/0x60 [ 6.072313] smp_init+0x26/0x79 [ 6.076313] kernel_init_freeable+0x103/0x258 [ 6.080313] ? rest_init+0xd0/0xd0 [ 6.084313] kernel_init+0xa/0x110 [ 6.088313] ret_from_fork+0x1f/0x30 [ 6.092313] ---[ end trace be9ecf17dceeb4f3 ]--- Reason is that there is no Xen pv trap entry for X86_TRAP_VC. Fix that by adding a generic trap handler for unknown traps and wire all unknown bare metal handlers to this generic handler, which will just crash the system in case such a trap will ever happen. Fixes: 0786138c78e793 ("x86/sev-es: Add a Runtime #VC Exception Handler") Cc: <stable@vger.kernel.org> # v5.10 Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2021-01-25 13:42:07 +00:00
if (!found)
*addr = (void *)xen_asm_exc_xen_unknown_trap;
if (WARN_ON(found && ist != 0 && !ist_okay))
return false;
return true;
}
static int cvt_gate_to_trap(int vector, const gate_desc *val,
struct trap_info *info)
{
unsigned long addr;
if (val->bits.type != GATE_TRAP && val->bits.type != GATE_INTERRUPT)
return 0;
info->vector = vector;
addr = gate_offset(val);
if (!get_trap_addr((void **)&addr, val->bits.ist))
return 0;
info->address = addr;
info->cs = gate_segment(val);
info->flags = val->bits.dpl;
/* interrupt gates clear IF */
if (val->bits.type == GATE_INTERRUPT)
info->flags |= 1 << 2;
return 1;
}
/* Locations of each CPU's IDT */
static DEFINE_PER_CPU(struct desc_ptr, idt_desc);
/* Set an IDT entry. If the entry is part of the current IDT, then
also update Xen. */
static void xen_write_idt_entry(gate_desc *dt, int entrynum, const gate_desc *g)
{
unsigned long p = (unsigned long)&dt[entrynum];
unsigned long start, end;
trace_xen_cpu_write_idt_entry(dt, entrynum, g);
preempt_disable();
start = __this_cpu_read(idt_desc.address);
end = start + __this_cpu_read(idt_desc.size) + 1;
xen_mc_flush();
native_write_idt_entry(dt, entrynum, g);
if (p >= start && (p + 8) <= end) {
struct trap_info info[2];
info[1].address = 0;
if (cvt_gate_to_trap(entrynum, g, &info[0]))
if (HYPERVISOR_set_trap_table(info))
BUG();
}
preempt_enable();
}
xen/x86: fix PV trap handling on secondary processors The initial observation was that in PV mode under Xen 32-bit user space didn't work anymore. Attempts of system calls ended in #GP(0x402). All of the sudden the vector 0x80 handler was not in place anymore. As it turns out up to 5.13 redundant initialization did occur: Once from cpu_initialize_context() (through its VCPUOP_initialise hypercall) and a 2nd time while each CPU was brought fully up. This 2nd initialization is now gone, uncovering that the 1st one was flawed: Unlike for the set_trap_table hypercall, a full virtual IDT needs to be specified here; the "vector" fields of the individual entries are of no interest. With many (kernel) IDT entries still(?) (i.e. at that point at least) empty, the syscall vector 0x80 ended up in slot 0x20 of the virtual IDT, thus becoming the domain's handler for vector 0x20. Make xen_convert_trap_info() fit for either purpose, leveraging the fact that on the xen_copy_trap_info() path the table starts out zero-filled. This includes moving out the writing of the sentinel, which would also have lead to a buffer overrun in the xen_copy_trap_info() case if all (kernel) IDT entries were populated. Convert the writing of the sentinel to clearing of the entire table entry rather than just the address field. (I didn't bother trying to identify the commit which uncovered the issue in 5.14; the commit named below is the one which actually introduced the bad code.) Fixes: f87e4cac4f4e ("xen: SMP guest support") Cc: stable@vger.kernel.org Signed-off-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Link: https://lore.kernel.org/r/7a266932-092e-b68f-f2bb-1473b61adc6e@suse.com Signed-off-by: Juergen Gross <jgross@suse.com>
2021-09-20 16:15:11 +00:00
static unsigned xen_convert_trap_info(const struct desc_ptr *desc,
struct trap_info *traps, bool full)
{
unsigned in, out, count;
count = (desc->size+1) / sizeof(gate_desc);
BUG_ON(count > 256);
for (in = out = 0; in < count; in++) {
gate_desc *entry = (gate_desc *)(desc->address) + in;
xen/x86: fix PV trap handling on secondary processors The initial observation was that in PV mode under Xen 32-bit user space didn't work anymore. Attempts of system calls ended in #GP(0x402). All of the sudden the vector 0x80 handler was not in place anymore. As it turns out up to 5.13 redundant initialization did occur: Once from cpu_initialize_context() (through its VCPUOP_initialise hypercall) and a 2nd time while each CPU was brought fully up. This 2nd initialization is now gone, uncovering that the 1st one was flawed: Unlike for the set_trap_table hypercall, a full virtual IDT needs to be specified here; the "vector" fields of the individual entries are of no interest. With many (kernel) IDT entries still(?) (i.e. at that point at least) empty, the syscall vector 0x80 ended up in slot 0x20 of the virtual IDT, thus becoming the domain's handler for vector 0x20. Make xen_convert_trap_info() fit for either purpose, leveraging the fact that on the xen_copy_trap_info() path the table starts out zero-filled. This includes moving out the writing of the sentinel, which would also have lead to a buffer overrun in the xen_copy_trap_info() case if all (kernel) IDT entries were populated. Convert the writing of the sentinel to clearing of the entire table entry rather than just the address field. (I didn't bother trying to identify the commit which uncovered the issue in 5.14; the commit named below is the one which actually introduced the bad code.) Fixes: f87e4cac4f4e ("xen: SMP guest support") Cc: stable@vger.kernel.org Signed-off-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Link: https://lore.kernel.org/r/7a266932-092e-b68f-f2bb-1473b61adc6e@suse.com Signed-off-by: Juergen Gross <jgross@suse.com>
2021-09-20 16:15:11 +00:00
if (cvt_gate_to_trap(in, entry, &traps[out]) || full)
out++;
}
xen/x86: fix PV trap handling on secondary processors The initial observation was that in PV mode under Xen 32-bit user space didn't work anymore. Attempts of system calls ended in #GP(0x402). All of the sudden the vector 0x80 handler was not in place anymore. As it turns out up to 5.13 redundant initialization did occur: Once from cpu_initialize_context() (through its VCPUOP_initialise hypercall) and a 2nd time while each CPU was brought fully up. This 2nd initialization is now gone, uncovering that the 1st one was flawed: Unlike for the set_trap_table hypercall, a full virtual IDT needs to be specified here; the "vector" fields of the individual entries are of no interest. With many (kernel) IDT entries still(?) (i.e. at that point at least) empty, the syscall vector 0x80 ended up in slot 0x20 of the virtual IDT, thus becoming the domain's handler for vector 0x20. Make xen_convert_trap_info() fit for either purpose, leveraging the fact that on the xen_copy_trap_info() path the table starts out zero-filled. This includes moving out the writing of the sentinel, which would also have lead to a buffer overrun in the xen_copy_trap_info() case if all (kernel) IDT entries were populated. Convert the writing of the sentinel to clearing of the entire table entry rather than just the address field. (I didn't bother trying to identify the commit which uncovered the issue in 5.14; the commit named below is the one which actually introduced the bad code.) Fixes: f87e4cac4f4e ("xen: SMP guest support") Cc: stable@vger.kernel.org Signed-off-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Link: https://lore.kernel.org/r/7a266932-092e-b68f-f2bb-1473b61adc6e@suse.com Signed-off-by: Juergen Gross <jgross@suse.com>
2021-09-20 16:15:11 +00:00
return out;
}
void xen_copy_trap_info(struct trap_info *traps)
{
const struct desc_ptr *desc = this_cpu_ptr(&idt_desc);
xen/x86: fix PV trap handling on secondary processors The initial observation was that in PV mode under Xen 32-bit user space didn't work anymore. Attempts of system calls ended in #GP(0x402). All of the sudden the vector 0x80 handler was not in place anymore. As it turns out up to 5.13 redundant initialization did occur: Once from cpu_initialize_context() (through its VCPUOP_initialise hypercall) and a 2nd time while each CPU was brought fully up. This 2nd initialization is now gone, uncovering that the 1st one was flawed: Unlike for the set_trap_table hypercall, a full virtual IDT needs to be specified here; the "vector" fields of the individual entries are of no interest. With many (kernel) IDT entries still(?) (i.e. at that point at least) empty, the syscall vector 0x80 ended up in slot 0x20 of the virtual IDT, thus becoming the domain's handler for vector 0x20. Make xen_convert_trap_info() fit for either purpose, leveraging the fact that on the xen_copy_trap_info() path the table starts out zero-filled. This includes moving out the writing of the sentinel, which would also have lead to a buffer overrun in the xen_copy_trap_info() case if all (kernel) IDT entries were populated. Convert the writing of the sentinel to clearing of the entire table entry rather than just the address field. (I didn't bother trying to identify the commit which uncovered the issue in 5.14; the commit named below is the one which actually introduced the bad code.) Fixes: f87e4cac4f4e ("xen: SMP guest support") Cc: stable@vger.kernel.org Signed-off-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Link: https://lore.kernel.org/r/7a266932-092e-b68f-f2bb-1473b61adc6e@suse.com Signed-off-by: Juergen Gross <jgross@suse.com>
2021-09-20 16:15:11 +00:00
xen_convert_trap_info(desc, traps, true);
}
/* Load a new IDT into Xen. In principle this can be per-CPU, so we
hold a spinlock to protect the static traps[] array (static because
it avoids allocation, and saves stack space). */
static void xen_load_idt(const struct desc_ptr *desc)
{
static DEFINE_SPINLOCK(lock);
static struct trap_info traps[257];
xen/x86: fix PV trap handling on secondary processors The initial observation was that in PV mode under Xen 32-bit user space didn't work anymore. Attempts of system calls ended in #GP(0x402). All of the sudden the vector 0x80 handler was not in place anymore. As it turns out up to 5.13 redundant initialization did occur: Once from cpu_initialize_context() (through its VCPUOP_initialise hypercall) and a 2nd time while each CPU was brought fully up. This 2nd initialization is now gone, uncovering that the 1st one was flawed: Unlike for the set_trap_table hypercall, a full virtual IDT needs to be specified here; the "vector" fields of the individual entries are of no interest. With many (kernel) IDT entries still(?) (i.e. at that point at least) empty, the syscall vector 0x80 ended up in slot 0x20 of the virtual IDT, thus becoming the domain's handler for vector 0x20. Make xen_convert_trap_info() fit for either purpose, leveraging the fact that on the xen_copy_trap_info() path the table starts out zero-filled. This includes moving out the writing of the sentinel, which would also have lead to a buffer overrun in the xen_copy_trap_info() case if all (kernel) IDT entries were populated. Convert the writing of the sentinel to clearing of the entire table entry rather than just the address field. (I didn't bother trying to identify the commit which uncovered the issue in 5.14; the commit named below is the one which actually introduced the bad code.) Fixes: f87e4cac4f4e ("xen: SMP guest support") Cc: stable@vger.kernel.org Signed-off-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Link: https://lore.kernel.org/r/7a266932-092e-b68f-f2bb-1473b61adc6e@suse.com Signed-off-by: Juergen Gross <jgross@suse.com>
2021-09-20 16:15:11 +00:00
unsigned out;
trace_xen_cpu_load_idt(desc);
spin_lock(&lock);
memcpy(this_cpu_ptr(&idt_desc), desc, sizeof(idt_desc));
xen/x86: fix PV trap handling on secondary processors The initial observation was that in PV mode under Xen 32-bit user space didn't work anymore. Attempts of system calls ended in #GP(0x402). All of the sudden the vector 0x80 handler was not in place anymore. As it turns out up to 5.13 redundant initialization did occur: Once from cpu_initialize_context() (through its VCPUOP_initialise hypercall) and a 2nd time while each CPU was brought fully up. This 2nd initialization is now gone, uncovering that the 1st one was flawed: Unlike for the set_trap_table hypercall, a full virtual IDT needs to be specified here; the "vector" fields of the individual entries are of no interest. With many (kernel) IDT entries still(?) (i.e. at that point at least) empty, the syscall vector 0x80 ended up in slot 0x20 of the virtual IDT, thus becoming the domain's handler for vector 0x20. Make xen_convert_trap_info() fit for either purpose, leveraging the fact that on the xen_copy_trap_info() path the table starts out zero-filled. This includes moving out the writing of the sentinel, which would also have lead to a buffer overrun in the xen_copy_trap_info() case if all (kernel) IDT entries were populated. Convert the writing of the sentinel to clearing of the entire table entry rather than just the address field. (I didn't bother trying to identify the commit which uncovered the issue in 5.14; the commit named below is the one which actually introduced the bad code.) Fixes: f87e4cac4f4e ("xen: SMP guest support") Cc: stable@vger.kernel.org Signed-off-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Link: https://lore.kernel.org/r/7a266932-092e-b68f-f2bb-1473b61adc6e@suse.com Signed-off-by: Juergen Gross <jgross@suse.com>
2021-09-20 16:15:11 +00:00
out = xen_convert_trap_info(desc, traps, false);
memset(&traps[out], 0, sizeof(traps[0]));
xen_mc_flush();
if (HYPERVISOR_set_trap_table(traps))
BUG();
spin_unlock(&lock);
}
/* Write a GDT descriptor entry. Ignore LDT descriptors, since
they're handled differently. */
static void xen_write_gdt_entry(struct desc_struct *dt, int entry,
const void *desc, int type)
{
trace_xen_cpu_write_gdt_entry(dt, entry, desc, type);
preempt_disable();
switch (type) {
case DESC_LDT:
case DESC_TSS:
/* ignore */
break;
default: {
xmaddr_t maddr = arbitrary_virt_to_machine(&dt[entry]);
xen_mc_flush();
if (HYPERVISOR_update_descriptor(maddr.maddr, *(u64 *)desc))
BUG();
}
}
preempt_enable();
}
/*
* Version of write_gdt_entry for use at early boot-time needed to
* update an entry as simply as possible.
*/
static void __init xen_write_gdt_entry_boot(struct desc_struct *dt, int entry,
const void *desc, int type)
{
trace_xen_cpu_write_gdt_entry(dt, entry, desc, type);
switch (type) {
case DESC_LDT:
case DESC_TSS:
/* ignore */
break;
default: {
xmaddr_t maddr = virt_to_machine(&dt[entry]);
if (HYPERVISOR_update_descriptor(maddr.maddr, *(u64 *)desc))
dt[entry] = *(struct desc_struct *)desc;
}
}
}
static void xen_load_sp0(unsigned long sp0)
{
struct multicall_space mcs;
mcs = xen_mc_entry(0);
MULTI_stack_switch(mcs.mc, __KERNEL_DS, sp0);
xen_mc_issue(PARAVIRT_LAZY_CPU);
x86/entry/64: Make cpu_entry_area.tss read-only The TSS is a fairly juicy target for exploits, and, now that the TSS is in the cpu_entry_area, it's no longer protected by kASLR. Make it read-only on x86_64. On x86_32, it can't be RO because it's written by the CPU during task switches, and we use a task gate for double faults. I'd also be nervous about errata if we tried to make it RO even on configurations without double fault handling. [ tglx: AMD confirmed that there is no problem on 64-bit with TSS RO. So it's probably safe to assume that it's a non issue, though Intel might have been creative in that area. Still waiting for confirmation. ] Signed-off-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Borislav Petkov <bpetkov@suse.de> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Laight <David.Laight@aculab.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Eduardo Valentin <eduval@amazon.com> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Will Deacon <will.deacon@arm.com> Cc: aliguori@amazon.com Cc: daniel.gruss@iaik.tugraz.at Cc: hughd@google.com Cc: keescook@google.com Link: https://lkml.kernel.org/r/20171204150606.733700132@linutronix.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-12-04 14:07:29 +00:00
this_cpu_write(cpu_tss_rw.x86_tss.sp0, sp0);
}
#ifdef CONFIG_X86_IOPL_IOPERM
static void xen_invalidate_io_bitmap(void)
{
struct physdev_set_iobitmap iobitmap = {
.bitmap = NULL,
.nr_ports = 0,
};
native_tss_invalidate_io_bitmap();
HYPERVISOR_physdev_op(PHYSDEVOP_set_iobitmap, &iobitmap);
}
static void xen_update_io_bitmap(void)
{
struct physdev_set_iobitmap iobitmap;
struct tss_struct *tss = this_cpu_ptr(&cpu_tss_rw);
native_tss_update_io_bitmap();
iobitmap.bitmap = (uint8_t *)(&tss->x86_tss) +
tss->x86_tss.io_bitmap_base;
if (tss->x86_tss.io_bitmap_base == IO_BITMAP_OFFSET_INVALID)
iobitmap.nr_ports = 0;
else
iobitmap.nr_ports = IO_BITMAP_BITS;
HYPERVISOR_physdev_op(PHYSDEVOP_set_iobitmap, &iobitmap);
}
#endif
static void xen_io_delay(void)
{
}
static DEFINE_PER_CPU(unsigned long, xen_cr0_value);
static unsigned long xen_read_cr0(void)
{
unsigned long cr0 = this_cpu_read(xen_cr0_value);
if (unlikely(cr0 == 0)) {
cr0 = native_read_cr0();
this_cpu_write(xen_cr0_value, cr0);
}
return cr0;
}
static void xen_write_cr0(unsigned long cr0)
{
struct multicall_space mcs;
this_cpu_write(xen_cr0_value, cr0);
/* Only pay attention to cr0.TS; everything else is
ignored. */
mcs = xen_mc_entry(0);
MULTI_fpu_taskswitch(mcs.mc, (cr0 & X86_CR0_TS) != 0);
xen_mc_issue(PARAVIRT_LAZY_CPU);
}
static void xen_write_cr4(unsigned long cr4)
{
cr4 &= ~(X86_CR4_PGE | X86_CR4_PSE | X86_CR4_PCE);
native_write_cr4(cr4);
}
static u64 xen_read_msr_safe(unsigned int msr, int *err)
{
u64 val;
if (pmu_msr_read(msr, &val, err))
return val;
val = native_read_msr_safe(msr, err);
switch (msr) {
case MSR_IA32_APICBASE:
val &= ~X2APIC_ENABLE;
break;
}
return val;
}
static int xen_write_msr_safe(unsigned int msr, unsigned low, unsigned high)
{
int ret;
unsigned int which;
u64 base;
ret = 0;
switch (msr) {
case MSR_FS_BASE: which = SEGBASE_FS; goto set;
case MSR_KERNEL_GS_BASE: which = SEGBASE_GS_USER; goto set;
case MSR_GS_BASE: which = SEGBASE_GS_KERNEL; goto set;
set:
base = ((u64)high << 32) | low;
if (HYPERVISOR_set_segment_base(which, base) != 0)
ret = -EIO;
break;
case MSR_STAR:
case MSR_CSTAR:
case MSR_LSTAR:
case MSR_SYSCALL_MASK:
case MSR_IA32_SYSENTER_CS:
case MSR_IA32_SYSENTER_ESP:
case MSR_IA32_SYSENTER_EIP:
/* Fast syscall setup is all done in hypercalls, so
these are all ignored. Stub them out here to stop
Xen console noise. */
break;
default:
if (!pmu_msr_write(msr, low, high, &ret))
ret = native_write_msr_safe(msr, low, high);
}
return ret;
}
static u64 xen_read_msr(unsigned int msr)
{
/*
* This will silently swallow a #GP from RDMSR. It may be worth
* changing that.
*/
int err;
return xen_read_msr_safe(msr, &err);
}
static void xen_write_msr(unsigned int msr, unsigned low, unsigned high)
{
/*
* This will silently swallow a #GP from WRMSR. It may be worth
* changing that.
*/
xen_write_msr_safe(msr, low, high);
}
/* This is called once we have the cpu_possible_mask */
void __init xen_setup_vcpu_info_placement(void)
{
int cpu;
for_each_possible_cpu(cpu) {
/* Set up direct vCPU id mapping for PV guests. */
per_cpu(xen_vcpu_id, cpu) = cpu;
/*
* xen_vcpu_setup(cpu) can fail -- in which case it
* falls back to the shared_info version for cpus
* where xen_vcpu_nr(cpu) < MAX_VIRT_CPUS.
*
* xen_cpu_up_prepare_pv() handles the rest by failing
* them in hotplug.
*/
(void) xen_vcpu_setup(cpu);
}
/*
* xen_vcpu_setup managed to place the vcpu_info within the
* percpu area for all cpus, so make use of it.
*/
if (xen_have_vcpu_info_placement) {
pv_ops.irq.save_fl = __PV_IS_CALLEE_SAVE(xen_save_fl_direct);
pv_ops.irq.irq_disable =
__PV_IS_CALLEE_SAVE(xen_irq_disable_direct);
pv_ops.irq.irq_enable =
__PV_IS_CALLEE_SAVE(xen_irq_enable_direct);
pv_ops.mmu.read_cr2 =
__PV_IS_CALLEE_SAVE(xen_read_cr2_direct);
}
}
static const struct pv_info xen_info __initconst = {
.extra_user_64bit_cs = FLAT_USER_CS64,
.name = "Xen",
};
static const typeof(pv_ops) xen_cpu_ops __initconst = {
.cpu = {
.cpuid = xen_cpuid,
.set_debugreg = xen_set_debugreg,
.get_debugreg = xen_get_debugreg,
.read_cr0 = xen_read_cr0,
.write_cr0 = xen_write_cr0,
.write_cr4 = xen_write_cr4,
.wbinvd = native_wbinvd,
.read_msr = xen_read_msr,
.write_msr = xen_write_msr,
.read_msr_safe = xen_read_msr_safe,
.write_msr_safe = xen_write_msr_safe,
.read_pmc = xen_read_pmc,
.load_tr_desc = paravirt_nop,
.set_ldt = xen_set_ldt,
.load_gdt = xen_load_gdt,
.load_idt = xen_load_idt,
.load_tls = xen_load_tls,
.load_gs_index = xen_load_gs_index,
.alloc_ldt = xen_alloc_ldt,
.free_ldt = xen_free_ldt,
.store_tr = xen_store_tr,
.write_ldt_entry = xen_write_ldt_entry,
.write_gdt_entry = xen_write_gdt_entry,
.write_idt_entry = xen_write_idt_entry,
.load_sp0 = xen_load_sp0,
#ifdef CONFIG_X86_IOPL_IOPERM
.invalidate_io_bitmap = xen_invalidate_io_bitmap,
.update_io_bitmap = xen_update_io_bitmap,
#endif
.io_delay = xen_io_delay,
.start_context_switch = paravirt_start_context_switch,
.end_context_switch = xen_end_context_switch,
},
};
static void xen_restart(char *msg)
{
xen_reboot(SHUTDOWN_reboot);
}
static void xen_machine_halt(void)
{
xen_reboot(SHUTDOWN_poweroff);
}
static void xen_machine_power_off(void)
{
if (pm_power_off)
pm_power_off();
xen_reboot(SHUTDOWN_poweroff);
}
static void xen_crash_shutdown(struct pt_regs *regs)
{
xen_reboot(SHUTDOWN_crash);
}
static const struct machine_ops xen_machine_ops __initconst = {
.restart = xen_restart,
.halt = xen_machine_halt,
.power_off = xen_machine_power_off,
.shutdown = xen_machine_halt,
.crash_shutdown = xen_crash_shutdown,
.emergency_restart = xen_emergency_restart,
};
static unsigned char xen_get_nmi_reason(void)
{
unsigned char reason = 0;
/* Construct a value which looks like it came from port 0x61. */
if (test_bit(_XEN_NMIREASON_io_error,
&HYPERVISOR_shared_info->arch.nmi_reason))
reason |= NMI_REASON_IOCHK;
if (test_bit(_XEN_NMIREASON_pci_serr,
&HYPERVISOR_shared_info->arch.nmi_reason))
reason |= NMI_REASON_SERR;
return reason;
}
static void __init xen_boot_params_init_edd(void)
{
#if IS_ENABLED(CONFIG_EDD)
struct xen_platform_op op;
struct edd_info *edd_info;
u32 *mbr_signature;
unsigned nr;
int ret;
edd_info = boot_params.eddbuf;
mbr_signature = boot_params.edd_mbr_sig_buffer;
op.cmd = XENPF_firmware_info;
op.u.firmware_info.type = XEN_FW_DISK_INFO;
for (nr = 0; nr < EDDMAXNR; nr++) {
struct edd_info *info = edd_info + nr;
op.u.firmware_info.index = nr;
info->params.length = sizeof(info->params);
set_xen_guest_handle(op.u.firmware_info.u.disk_info.edd_params,
&info->params);
ret = HYPERVISOR_platform_op(&op);
if (ret)
break;
#define C(x) info->x = op.u.firmware_info.u.disk_info.x
C(device);
C(version);
C(interface_support);
C(legacy_max_cylinder);
C(legacy_max_head);
C(legacy_sectors_per_track);
#undef C
}
boot_params.eddbuf_entries = nr;
op.u.firmware_info.type = XEN_FW_DISK_MBR_SIGNATURE;
for (nr = 0; nr < EDD_MBR_SIG_MAX; nr++) {
op.u.firmware_info.index = nr;
ret = HYPERVISOR_platform_op(&op);
if (ret)
break;
mbr_signature[nr] = op.u.firmware_info.u.disk_mbr_signature.mbr_signature;
}
boot_params.edd_mbr_sig_buf_entries = nr;
#endif
}
/*
* Set up the GDT and segment registers for -fstack-protector. Until
* we do this, we have to be careful not to call any stack-protected
* function, which is most of the kernel.
*/
static void __init xen_setup_gdt(int cpu)
{
pv_ops.cpu.write_gdt_entry = xen_write_gdt_entry_boot;
pv_ops.cpu.load_gdt = xen_load_gdt_boot;
switch_to_new_gdt(cpu);
pv_ops.cpu.write_gdt_entry = xen_write_gdt_entry;
pv_ops.cpu.load_gdt = xen_load_gdt;
}
static void __init xen_dom0_set_legacy_features(void)
{
x86_platform.legacy.rtc = 1;
}
xen: reset legacy rtc flag for PV domU A Xen PV guest doesn't have a legacy RTC device, so reset the legacy RTC flag. Otherwise the following WARN splat will occur at boot: [ 1.333404] WARNING: CPU: 1 PID: 1 at /home/gross/linux/head/drivers/rtc/rtc-mc146818-lib.c:25 mc146818_get_time+0x1be/0x210 [ 1.333404] Modules linked in: [ 1.333404] CPU: 1 PID: 1 Comm: swapper/0 Tainted: G W 5.14.0-rc7-default+ #282 [ 1.333404] RIP: e030:mc146818_get_time+0x1be/0x210 [ 1.333404] Code: c0 64 01 c5 83 fd 45 89 6b 14 7f 06 83 c5 64 89 6b 14 41 83 ec 01 b8 02 00 00 00 44 89 63 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 <0f> 0b 48 c7 c7 30 0e ef 82 4c 89 e6 e8 71 2a 24 00 48 c7 c0 ff ff [ 1.333404] RSP: e02b:ffffc90040093df8 EFLAGS: 00010002 [ 1.333404] RAX: 00000000000000ff RBX: ffffc90040093e34 RCX: 0000000000000000 [ 1.333404] RDX: 0000000000000001 RSI: 0000000000000000 RDI: 000000000000000d [ 1.333404] RBP: ffffffff82ef0e30 R08: ffff888005013e60 R09: 0000000000000000 [ 1.333404] R10: ffffffff82373e9b R11: 0000000000033080 R12: 0000000000000200 [ 1.333404] R13: 0000000000000000 R14: 0000000000000002 R15: ffffffff82cdc6d4 [ 1.333404] FS: 0000000000000000(0000) GS:ffff88807d440000(0000) knlGS:0000000000000000 [ 1.333404] CS: 10000e030 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1.333404] CR2: 0000000000000000 CR3: 000000000260a000 CR4: 0000000000050660 [ 1.333404] Call Trace: [ 1.333404] ? wakeup_sources_sysfs_init+0x30/0x30 [ 1.333404] ? rdinit_setup+0x2b/0x2b [ 1.333404] early_resume_init+0x23/0xa4 [ 1.333404] ? cn_proc_init+0x36/0x36 [ 1.333404] do_one_initcall+0x3e/0x200 [ 1.333404] kernel_init_freeable+0x232/0x28e [ 1.333404] ? rest_init+0xd0/0xd0 [ 1.333404] kernel_init+0x16/0x120 [ 1.333404] ret_from_fork+0x1f/0x30 Cc: <stable@vger.kernel.org> Fixes: 8d152e7a5c7537 ("x86/rtc: Replace paravirt rtc check with platform legacy quirk") Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Link: https://lore.kernel.org/r/20210903084937.19392-3-jgross@suse.com Signed-off-by: Juergen Gross <jgross@suse.com>
2021-09-03 08:49:37 +00:00
static void __init xen_domu_set_legacy_features(void)
{
x86_platform.legacy.rtc = 0;
}
/* First C function to be called on Xen boot */
asmlinkage __visible void __init xen_start_kernel(void)
{
struct physdev_set_iopl set_iopl;
unsigned long initrd_start = 0;
int rc;
if (!xen_start_info)
return;
xen_domain_type = XEN_PV_DOMAIN;
xen_start_flags = xen_start_info->flags;
xen_setup_features();
/* Install Xen paravirt ops */
pv_info = xen_info;
pv_ops.cpu = xen_cpu_ops.cpu;
paravirt_iret = xen_iret;
xen_init_irq_ops();
/*
* Setup xen_vcpu early because it is needed for
* local_irq_disable(), irqs_disabled(), e.g. in printk().
*
* Don't do the full vcpu_info placement stuff until we have
* the cpu_possible_mask and a non-dummy shared_info.
*/
xen_vcpu_info_reset(0);
x86_platform.get_nmi_reason = xen_get_nmi_reason;
x86_init.resources.memory_setup = xen_memory_setup;
x86_init.irqs.intr_mode_select = x86_init_noop;
x86_init.irqs.intr_mode_init = x86_init_noop;
x86_init.oem.arch_setup = xen_arch_setup;
x86_init.oem.banner = xen_banner;
x86_init.hyper.init_platform = xen_pv_init_platform;
x86_init.hyper.guest_late_init = xen_pv_guest_late_init;
/*
* Set up some pagetable state before starting to set any ptes.
*/
xen_setup_machphys_mapping();
xen_init_mmu_ops();
/* Prevent unwanted bits from being set in PTEs. */
__supported_pte_mask &= ~_PAGE_GLOBAL;
__default_kernel_pte_mask &= ~_PAGE_GLOBAL;
/*
* Prevent page tables from being allocated in highmem, even
* if CONFIG_HIGHPTE is enabled.
*/
__userpte_alloc_gfp &= ~__GFP_HIGHMEM;
/* Get mfn list */
xen_build_dynamic_phys_to_machine();
/* Work out if we support NX */
get_cpu_cap(&boot_cpu_data);
x86_configure_nx();
/*
* Set up kernel GDT and segment registers, mainly so that
* -fstack-protector code can be executed.
*/
xen_setup_gdt(0);
xen/pv: Call get_cpu_address_sizes to set x86_virt/phys_bits Commit d94a155c59c9 ("x86/cpu: Prevent cpuinfo_x86::x86_phys_bits adjustment corruption") has moved the query and calculation of the x86_virt_bits and x86_phys_bits fields of the cpuinfo_x86 struct from the get_cpu_cap function to a new function named get_cpu_address_sizes. One of the call sites related to Xen PV VMs was unfortunately missed in the aforementioned commit. This prevents successful boot-up of kernel versions 4.17 and up in Xen PV VMs if CONFIG_DEBUG_VIRTUAL is enabled, due to the following code path: enlighten_pv.c::xen_start_kernel mmu_pv.c::xen_reserve_special_pages page.h::__pa physaddr.c::__phys_addr physaddr.h::phys_addr_valid phys_addr_valid uses boot_cpu_data.x86_phys_bits to validate physical addresses. boot_cpu_data.x86_phys_bits is no longer populated before the call to xen_reserve_special_pages due to the aforementioned commit though, so the validation performed by phys_addr_valid fails, which causes __phys_addr to trigger a BUG, preventing boot-up. Signed-off-by: M. Vefa Bicakci <m.v.b@runbox.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Juergen Gross <jgross@suse.com> Cc: xen-devel@lists.xenproject.org Cc: x86@kernel.org Cc: stable@vger.kernel.org # for v4.17 and up Fixes: d94a155c59c9 ("x86/cpu: Prevent cpuinfo_x86::x86_phys_bits adjustment corruption") Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2018-07-24 12:45:47 +00:00
/* Determine virtual and physical address sizes */
get_cpu_address_sizes(&boot_cpu_data);
/* Let's presume PV guests always boot on vCPU with id 0. */
per_cpu(xen_vcpu_id, 0) = 0;
idt_setup_early_handler();
xen_init_capabilities();
#ifdef CONFIG_X86_LOCAL_APIC
/*
* set up the basic apic ops.
*/
xen_init_apic();
#endif
machine_ops = xen_machine_ops;
/*
* The only reliable way to retain the initial address of the
* percpu gdt_page is to remember it here, so we can go and
* mark it RW later, when the initial percpu area is freed.
*/
xen_initial_gdt = &per_cpu(gdt_page, 0);
xen_smp_init();
#ifdef CONFIG_ACPI_NUMA
/*
* The pages we from Xen are not related to machine pages, so
* any NUMA information the kernel tries to get from ACPI will
* be meaningless. Prevent it from trying.
*/
x86/numa: cleanup configuration dependent command-line options Patch series "device-dax: Support sub-dividing soft-reserved ranges", v5. The device-dax facility allows an address range to be directly mapped through a chardev, or optionally hotplugged to the core kernel page allocator as System-RAM. It is the mechanism for converting persistent memory (pmem) to be used as another volatile memory pool i.e. the current Memory Tiering hot topic on linux-mm. In the case of pmem the nvdimm-namespace-label mechanism can sub-divide it, but that labeling mechanism is not available / applicable to soft-reserved ("EFI specific purpose") memory [3]. This series provides a sysfs-mechanism for the daxctl utility to enable provisioning of volatile-soft-reserved memory ranges. The motivations for this facility are: 1/ Allow performance differentiated memory ranges to be split between kernel-managed and directly-accessed use cases. 2/ Allow physical memory to be provisioned along performance relevant address boundaries. For example, divide a memory-side cache [4] along cache-color boundaries. 3/ Parcel out soft-reserved memory to VMs using device-dax as a security / permissions boundary [5]. Specifically I have seen people (ab)using memmap=nn!ss (mark System-RAM as Persistent Memory) just to get the device-dax interface on custom address ranges. A follow-on for the VM use case is to teach device-dax to dynamically allocate 'struct page' at runtime to reduce the duplication of 'struct page' space in both the guest and the host kernel for the same physical pages. [2]: http://lore.kernel.org/r/20200713160837.13774-11-joao.m.martins@oracle.com [3]: http://lore.kernel.org/r/157309097008.1579826.12818463304589384434.stgit@dwillia2-desk3.amr.corp.intel.com [4]: http://lore.kernel.org/r/154899811738.3165233.12325692939590944259.stgit@dwillia2-desk3.amr.corp.intel.com [5]: http://lore.kernel.org/r/20200110190313.17144-1-joao.m.martins@oracle.com This patch (of 23): In preparation for adding a new numa= option clean up the existing ones to avoid ifdefs in numa_setup(), and provide feedback when the option is numa=fake= option is invalid due to kernel config. The same does not need to be done for numa=noacpi, since the capability is already hard disabled at compile-time. Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Ard Biesheuvel <ardb@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brice Goglin <Brice.Goglin@inria.fr> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: David Airlie <airlied@linux.ie> Cc: David Hildenbrand <david@redhat.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Jason Gunthorpe <jgg@mellanox.com> Cc: Jeff Moyer <jmoyer@redhat.com> Cc: Jia He <justin.he@arm.com> Cc: Joao Martins <joao.m.martins@oracle.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Paul Mackerras <paulus@ozlabs.org> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: Wei Yang <richard.weiyang@linux.alibaba.com> Cc: Will Deacon <will@kernel.org> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Hulk Robot <hulkci@huawei.com> Cc: Jason Yan <yanaijie@huawei.com> Cc: "Jérôme Glisse" <jglisse@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: kernel test robot <lkp@intel.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Stefano Stabellini <sstabellini@kernel.org> Cc: Vivek Goyal <vgoyal@redhat.com> Link: https://lkml.kernel.org/r/160106109960.30709.7379926726669669398.stgit@dwillia2-desk3.amr.corp.intel.com Link: https://lkml.kernel.org/r/159643094279.4062302.17779410714418721328.stgit@dwillia2-desk3.amr.corp.intel.com Link: https://lkml.kernel.org/r/159643094925.4062302.14979872973043772305.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-13 23:48:57 +00:00
disable_srat();
#endif
WARN_ON(xen_cpuhp_setup(xen_cpu_up_prepare_pv, xen_cpu_dead_pv));
local_irq_disable();
early_boot_irqs_disabled = true;
xen_raw_console_write("mapping kernel into physical memory\n");
xen_setup_kernel_pagetable((pgd_t *)xen_start_info->pt_base,
xen_start_info->nr_pages);
xen_reserve_special_pages();
/*
* We used to do this in xen_arch_setup, but that is too late
* on AMD were early_cpu_init (run before ->arch_setup()) calls
* early_amd_init which pokes 0xcf8 port.
*/
set_iopl.iopl = 1;
rc = HYPERVISOR_physdev_op(PHYSDEVOP_set_iopl, &set_iopl);
if (rc != 0)
xen_raw_printk("physdev_op failed %d\n", rc);
if (xen_start_info->mod_start) {
if (xen_start_info->flags & SIF_MOD_START_PFN)
initrd_start = PFN_PHYS(xen_start_info->mod_start);
else
initrd_start = __pa(xen_start_info->mod_start);
}
/* Poke various useful things into boot_params */
boot_params.hdr.type_of_loader = (9 << 4) | 0;
boot_params.hdr.ramdisk_image = initrd_start;
boot_params.hdr.ramdisk_size = xen_start_info->mod_len;
boot_params.hdr.cmd_line_ptr = __pa(xen_start_info->cmd_line);
boot_params.hdr.hardware_subarch = X86_SUBARCH_XEN;
if (!xen_initial_domain()) {
if (pci_xen)
x86_init.pci.arch_init = pci_xen_init;
xen: reset legacy rtc flag for PV domU A Xen PV guest doesn't have a legacy RTC device, so reset the legacy RTC flag. Otherwise the following WARN splat will occur at boot: [ 1.333404] WARNING: CPU: 1 PID: 1 at /home/gross/linux/head/drivers/rtc/rtc-mc146818-lib.c:25 mc146818_get_time+0x1be/0x210 [ 1.333404] Modules linked in: [ 1.333404] CPU: 1 PID: 1 Comm: swapper/0 Tainted: G W 5.14.0-rc7-default+ #282 [ 1.333404] RIP: e030:mc146818_get_time+0x1be/0x210 [ 1.333404] Code: c0 64 01 c5 83 fd 45 89 6b 14 7f 06 83 c5 64 89 6b 14 41 83 ec 01 b8 02 00 00 00 44 89 63 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 <0f> 0b 48 c7 c7 30 0e ef 82 4c 89 e6 e8 71 2a 24 00 48 c7 c0 ff ff [ 1.333404] RSP: e02b:ffffc90040093df8 EFLAGS: 00010002 [ 1.333404] RAX: 00000000000000ff RBX: ffffc90040093e34 RCX: 0000000000000000 [ 1.333404] RDX: 0000000000000001 RSI: 0000000000000000 RDI: 000000000000000d [ 1.333404] RBP: ffffffff82ef0e30 R08: ffff888005013e60 R09: 0000000000000000 [ 1.333404] R10: ffffffff82373e9b R11: 0000000000033080 R12: 0000000000000200 [ 1.333404] R13: 0000000000000000 R14: 0000000000000002 R15: ffffffff82cdc6d4 [ 1.333404] FS: 0000000000000000(0000) GS:ffff88807d440000(0000) knlGS:0000000000000000 [ 1.333404] CS: 10000e030 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1.333404] CR2: 0000000000000000 CR3: 000000000260a000 CR4: 0000000000050660 [ 1.333404] Call Trace: [ 1.333404] ? wakeup_sources_sysfs_init+0x30/0x30 [ 1.333404] ? rdinit_setup+0x2b/0x2b [ 1.333404] early_resume_init+0x23/0xa4 [ 1.333404] ? cn_proc_init+0x36/0x36 [ 1.333404] do_one_initcall+0x3e/0x200 [ 1.333404] kernel_init_freeable+0x232/0x28e [ 1.333404] ? rest_init+0xd0/0xd0 [ 1.333404] kernel_init+0x16/0x120 [ 1.333404] ret_from_fork+0x1f/0x30 Cc: <stable@vger.kernel.org> Fixes: 8d152e7a5c7537 ("x86/rtc: Replace paravirt rtc check with platform legacy quirk") Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Link: https://lore.kernel.org/r/20210903084937.19392-3-jgross@suse.com Signed-off-by: Juergen Gross <jgross@suse.com>
2021-09-03 08:49:37 +00:00
x86_platform.set_legacy_features =
xen_domu_set_legacy_features;
} else {
const struct dom0_vga_console_info *info =
(void *)((char *)xen_start_info +
xen_start_info->console.dom0.info_off);
struct xen_platform_op op = {
.cmd = XENPF_firmware_info,
.interface_version = XENPF_INTERFACE_VERSION,
.u.firmware_info.type = XEN_FW_KBD_SHIFT_FLAGS,
};
x86_platform.set_legacy_features =
xen_dom0_set_legacy_features;
xen_init_vga(info, xen_start_info->console.dom0.info_size);
xen_start_info->console.domU.mfn = 0;
xen_start_info->console.domU.evtchn = 0;
if (HYPERVISOR_platform_op(&op) == 0)
boot_params.kbd_status = op.u.firmware_info.u.kbd_shift_flags;
/* Make sure ACS will be enabled */
pci_request_acs();
xen_acpi_sleep_register();
/* Avoid searching for BIOS MP tables */
x86_init.mpparse.find_smp_config = x86_init_noop;
x86_init.mpparse.get_smp_config = x86_init_uint_noop;
xen_boot_params_init_edd();
#ifdef CONFIG_ACPI
/*
* Disable selecting "Firmware First mode" for correctable
* memory errors, as this is the duty of the hypervisor to
* decide.
*/
acpi_disable_cmcff = 1;
#endif
}
xen_add_preferred_consoles();
#ifdef CONFIG_PCI
/* PCI BIOS service won't work from a PV guest. */
pci_probe &= ~PCI_PROBE_BIOS;
#endif
xen_raw_console_write("about to get started...\n");
/* We need this for printk timestamps */
xen_setup_runstate_info(0);
xen_efi_init(&boot_params);
/* Start the world */
cr4_init_shadow(); /* 32b kernel does this in i386_start_kernel() */
x86_64_start_reservations((char *)__pa_symbol(&boot_params));
}
static int xen_cpu_up_prepare_pv(unsigned int cpu)
{
int rc;
if (per_cpu(xen_vcpu, cpu) == NULL)
return -ENODEV;
xen_setup_timer(cpu);
rc = xen_smp_intr_init(cpu);
if (rc) {
WARN(1, "xen_smp_intr_init() for CPU %d failed: %d\n",
cpu, rc);
return rc;
}
rc = xen_smp_intr_init_pv(cpu);
if (rc) {
WARN(1, "xen_smp_intr_init_pv() for CPU %d failed: %d\n",
cpu, rc);
return rc;
}
return 0;
}
static int xen_cpu_dead_pv(unsigned int cpu)
{
xen_smp_intr_free(cpu);
xen_smp_intr_free_pv(cpu);
xen_teardown_timer(cpu);
return 0;
}
static uint32_t __init xen_platform_pv(void)
{
if (xen_pv_domain())
return xen_cpuid_base();
return 0;
}
const __initconst struct hypervisor_x86 x86_hyper_xen_pv = {
.name = "Xen PV",
.detect = xen_platform_pv,
.type = X86_HYPER_XEN_PV,
.runtime.pin_vcpu = xen_pin_vcpu,
.ignore_nopv = true,
};