davidlt/kernel-ark
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
edd238bd43
kernel-ark/arch/sparc/kernel/pci_sabre.c

615 lines
20 KiB
C
Raw Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 14:07:57 +00:00
// SPDX-License-Identifier: GPL-2.0
[SPARC64]: Convert PCI over to generic struct iommu/strbuf. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-27 04:08:21 +00:00
/* pci_sabre.c: Sabre specific PCI controller support.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
*
[SPARC64]: Convert PCI over to generic struct iommu/strbuf. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-27 04:08:21 +00:00
* Copyright (C) 1997, 1998, 1999, 2007 David S. Miller (davem@davemloft.net)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
* Copyright (C) 1998, 1999 Eddie C. Dost (ecd@skynet.be)
* Copyright (C) 1999 Jakub Jelinek (jakub@redhat.com)
*/
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/pci.h>
#include <linux/init.h>
sparc: add export.h to arch/sparc files as required These files are only exporting symbols, so they don't need the full module.h header file. Previously they were getting access to EXPORT_SYMBOL implicitly via overuse of module.h from within other .h files, but that is being cleaned up. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-07-18 19:57:46 +00:00
#include <linux/export.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#include <linux/slab.h>
#include <linux/interrupt.h>
sparc: don't use asm/of_device.h Use linux/of_device.h instead. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-07 22:33:36 +00:00
#include <linux/of_device.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#include <asm/apb.h>
#include <asm/iommu.h>
#include <asm/irq.h>
[SPARC64]: Use in-kernel OBP device tree for PCI controller probing. It can be pushed even further down, but this is a first step. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-22 01:18:47 +00:00
#include <asm/prom.h>
sparc64: Kill hand-crafted I/O accessors in PCI controller drivers. Use existing upa_{read,write}q() interfaces instead. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-10 11:13:10 +00:00
#include <asm/upa.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#include "pci_impl.h"
#include "iommu_common.h"
sparc64: Start commonizing code common between SABRE and PSYCHO. These are very similar chips, in fact they are identical in some macro blocks. So start commonizing code which they can share. We begin with the IOMMU initialization sequence. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-10 10:07:03 +00:00
#include "psycho_common.h"
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
sparc64: Convert SABRE PCI controller driver into a real driver. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-30 10:14:01 +00:00
#define DRIVER_NAME "sabre"
#define PFX DRIVER_NAME ": "
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/* SABRE PCI controller register offsets and definitions. */
#define SABRE_UE_AFSR 0x0030UL
#define SABRE_UEAFSR_PDRD 0x4000000000000000UL /* Primary PCI DMA Read */
#define SABRE_UEAFSR_PDWR 0x2000000000000000UL /* Primary PCI DMA Write */
#define SABRE_UEAFSR_SDRD 0x0800000000000000UL /* Secondary PCI DMA Read */
#define SABRE_UEAFSR_SDWR 0x0400000000000000UL /* Secondary PCI DMA Write */
#define SABRE_UEAFSR_SDTE 0x0200000000000000UL /* Secondary DMA Translation Error */
#define SABRE_UEAFSR_PDTE 0x0100000000000000UL /* Primary DMA Translation Error */
#define SABRE_UEAFSR_BMSK 0x0000ffff00000000UL /* Bytemask */
#define SABRE_UEAFSR_OFF 0x00000000e0000000UL /* Offset (AFAR bits [5:3] */
#define SABRE_UEAFSR_BLK 0x0000000000800000UL /* Was block operation */
#define SABRE_UECE_AFAR 0x0038UL
#define SABRE_CE_AFSR 0x0040UL
#define SABRE_CEAFSR_PDRD 0x4000000000000000UL /* Primary PCI DMA Read */
#define SABRE_CEAFSR_PDWR 0x2000000000000000UL /* Primary PCI DMA Write */
#define SABRE_CEAFSR_SDRD 0x0800000000000000UL /* Secondary PCI DMA Read */
#define SABRE_CEAFSR_SDWR 0x0400000000000000UL /* Secondary PCI DMA Write */
#define SABRE_CEAFSR_ESYND 0x00ff000000000000UL /* ECC Syndrome */
#define SABRE_CEAFSR_BMSK 0x0000ffff00000000UL /* Bytemask */
#define SABRE_CEAFSR_OFF 0x00000000e0000000UL /* Offset */
#define SABRE_CEAFSR_BLK 0x0000000000800000UL /* Was block operation */
#define SABRE_UECE_AFAR_ALIAS 0x0048UL /* Aliases to 0x0038 */
#define SABRE_IOMMU_CONTROL 0x0200UL
#define SABRE_IOMMUCTRL_ERRSTS 0x0000000006000000UL /* Error status bits */
#define SABRE_IOMMUCTRL_ERR 0x0000000001000000UL /* Error present in IOTLB */
#define SABRE_IOMMUCTRL_LCKEN 0x0000000000800000UL /* IOTLB lock enable */
#define SABRE_IOMMUCTRL_LCKPTR 0x0000000000780000UL /* IOTLB lock pointer */
#define SABRE_IOMMUCTRL_TSBSZ 0x0000000000070000UL /* TSB Size */
#define SABRE_IOMMU_TSBSZ_1K 0x0000000000000000
#define SABRE_IOMMU_TSBSZ_2K 0x0000000000010000
#define SABRE_IOMMU_TSBSZ_4K 0x0000000000020000
#define SABRE_IOMMU_TSBSZ_8K 0x0000000000030000
#define SABRE_IOMMU_TSBSZ_16K 0x0000000000040000
#define SABRE_IOMMU_TSBSZ_32K 0x0000000000050000
#define SABRE_IOMMU_TSBSZ_64K 0x0000000000060000
#define SABRE_IOMMU_TSBSZ_128K 0x0000000000070000
#define SABRE_IOMMUCTRL_TBWSZ 0x0000000000000004UL /* TSB assumed page size */
#define SABRE_IOMMUCTRL_DENAB 0x0000000000000002UL /* Diagnostic Mode Enable */
#define SABRE_IOMMUCTRL_ENAB 0x0000000000000001UL /* IOMMU Enable */
#define SABRE_IOMMU_TSBBASE 0x0208UL
#define SABRE_IOMMU_FLUSH 0x0210UL
#define SABRE_IMAP_A_SLOT0 0x0c00UL
#define SABRE_IMAP_B_SLOT0 0x0c20UL
#define SABRE_IMAP_SCSI 0x1000UL
#define SABRE_IMAP_ETH 0x1008UL
#define SABRE_IMAP_BPP 0x1010UL
#define SABRE_IMAP_AU_REC 0x1018UL
#define SABRE_IMAP_AU_PLAY 0x1020UL
#define SABRE_IMAP_PFAIL 0x1028UL
#define SABRE_IMAP_KMS 0x1030UL
#define SABRE_IMAP_FLPY 0x1038UL
#define SABRE_IMAP_SHW 0x1040UL
#define SABRE_IMAP_KBD 0x1048UL
#define SABRE_IMAP_MS 0x1050UL
#define SABRE_IMAP_SER 0x1058UL
#define SABRE_IMAP_UE 0x1070UL
#define SABRE_IMAP_CE 0x1078UL
#define SABRE_IMAP_PCIERR 0x1080UL
#define SABRE_IMAP_GFX 0x1098UL
#define SABRE_IMAP_EUPA 0x10a0UL
#define SABRE_ICLR_A_SLOT0 0x1400UL
#define SABRE_ICLR_B_SLOT0 0x1480UL
#define SABRE_ICLR_SCSI 0x1800UL
#define SABRE_ICLR_ETH 0x1808UL
#define SABRE_ICLR_BPP 0x1810UL
#define SABRE_ICLR_AU_REC 0x1818UL
#define SABRE_ICLR_AU_PLAY 0x1820UL
#define SABRE_ICLR_PFAIL 0x1828UL
#define SABRE_ICLR_KMS 0x1830UL
#define SABRE_ICLR_FLPY 0x1838UL
#define SABRE_ICLR_SHW 0x1840UL
#define SABRE_ICLR_KBD 0x1848UL
#define SABRE_ICLR_MS 0x1850UL
#define SABRE_ICLR_SER 0x1858UL
#define SABRE_ICLR_UE 0x1870UL
#define SABRE_ICLR_CE 0x1878UL
#define SABRE_ICLR_PCIERR 0x1880UL
#define SABRE_WRSYNC 0x1c20UL
#define SABRE_PCICTRL 0x2000UL
#define SABRE_PCICTRL_MRLEN 0x0000001000000000UL /* Use MemoryReadLine for block loads/stores */
#define SABRE_PCICTRL_SERR 0x0000000400000000UL /* Set when SERR asserted on PCI bus */
#define SABRE_PCICTRL_ARBPARK 0x0000000000200000UL /* Bus Parking 0=Ultra-IIi 1=prev-bus-owner */
#define SABRE_PCICTRL_CPUPRIO 0x0000000000100000UL /* Ultra-IIi granted every other bus cycle */
#define SABRE_PCICTRL_ARBPRIO 0x00000000000f0000UL /* Slot which is granted every other bus cycle */
#define SABRE_PCICTRL_ERREN 0x0000000000000100UL /* PCI Error Interrupt Enable */
#define SABRE_PCICTRL_RTRYWE 0x0000000000000080UL /* DMA Flow Control 0=wait-if-possible 1=retry */
#define SABRE_PCICTRL_AEN 0x000000000000000fUL /* Slot PCI arbitration enables */
#define SABRE_PIOAFSR 0x2010UL
#define SABRE_PIOAFSR_PMA 0x8000000000000000UL /* Primary Master Abort */
#define SABRE_PIOAFSR_PTA 0x4000000000000000UL /* Primary Target Abort */
#define SABRE_PIOAFSR_PRTRY 0x2000000000000000UL /* Primary Excessive Retries */
#define SABRE_PIOAFSR_PPERR 0x1000000000000000UL /* Primary Parity Error */
#define SABRE_PIOAFSR_SMA 0x0800000000000000UL /* Secondary Master Abort */
#define SABRE_PIOAFSR_STA 0x0400000000000000UL /* Secondary Target Abort */
#define SABRE_PIOAFSR_SRTRY 0x0200000000000000UL /* Secondary Excessive Retries */
#define SABRE_PIOAFSR_SPERR 0x0100000000000000UL /* Secondary Parity Error */
#define SABRE_PIOAFSR_BMSK 0x0000ffff00000000UL /* Byte Mask */
#define SABRE_PIOAFSR_BLK 0x0000000080000000UL /* Was Block Operation */
#define SABRE_PIOAFAR 0x2018UL
#define SABRE_PCIDIAG 0x2020UL
#define SABRE_PCIDIAG_DRTRY 0x0000000000000040UL /* Disable PIO Retry Limit */
#define SABRE_PCIDIAG_IPAPAR 0x0000000000000008UL /* Invert PIO Address Parity */
#define SABRE_PCIDIAG_IPDPAR 0x0000000000000004UL /* Invert PIO Data Parity */
#define SABRE_PCIDIAG_IDDPAR 0x0000000000000002UL /* Invert DMA Data Parity */
#define SABRE_PCIDIAG_ELPBK 0x0000000000000001UL /* Loopback Enable - not supported */
#define SABRE_PCITASR 0x2028UL
#define SABRE_PCITASR_EF 0x0000000000000080UL /* Respond to 0xe0000000-0xffffffff */
#define SABRE_PCITASR_CD 0x0000000000000040UL /* Respond to 0xc0000000-0xdfffffff */
#define SABRE_PCITASR_AB 0x0000000000000020UL /* Respond to 0xa0000000-0xbfffffff */
#define SABRE_PCITASR_89 0x0000000000000010UL /* Respond to 0x80000000-0x9fffffff */
#define SABRE_PCITASR_67 0x0000000000000008UL /* Respond to 0x60000000-0x7fffffff */
#define SABRE_PCITASR_45 0x0000000000000004UL /* Respond to 0x40000000-0x5fffffff */
#define SABRE_PCITASR_23 0x0000000000000002UL /* Respond to 0x20000000-0x3fffffff */
#define SABRE_PCITASR_01 0x0000000000000001UL /* Respond to 0x00000000-0x1fffffff */
#define SABRE_PIOBUF_DIAG 0x5000UL
#define SABRE_DMABUF_DIAGLO 0x5100UL
#define SABRE_DMABUF_DIAGHI 0x51c0UL
#define SABRE_IMAP_GFX_ALIAS 0x6000UL /* Aliases to 0x1098 */
#define SABRE_IMAP_EUPA_ALIAS 0x8000UL /* Aliases to 0x10a0 */
#define SABRE_IOMMU_VADIAG 0xa400UL
#define SABRE_IOMMU_TCDIAG 0xa408UL
#define SABRE_IOMMU_TAG 0xa580UL
#define SABRE_IOMMUTAG_ERRSTS 0x0000000001800000UL /* Error status bits */
#define SABRE_IOMMUTAG_ERR 0x0000000000400000UL /* Error present */
#define SABRE_IOMMUTAG_WRITE 0x0000000000200000UL /* Page is writable */
#define SABRE_IOMMUTAG_STREAM 0x0000000000100000UL /* Streamable bit - unused */
#define SABRE_IOMMUTAG_SIZE 0x0000000000080000UL /* 0=8k 1=16k */
#define SABRE_IOMMUTAG_VPN 0x000000000007ffffUL /* Virtual Page Number [31:13] */
#define SABRE_IOMMU_DATA 0xa600UL
#define SABRE_IOMMUDATA_VALID 0x0000000040000000UL /* Valid */
#define SABRE_IOMMUDATA_USED 0x0000000020000000UL /* Used (for LRU algorithm) */
#define SABRE_IOMMUDATA_CACHE 0x0000000010000000UL /* Cacheable */
#define SABRE_IOMMUDATA_PPN 0x00000000001fffffUL /* Physical Page Number [33:13] */
#define SABRE_PCI_IRQSTATE 0xa800UL
#define SABRE_OBIO_IRQSTATE 0xa808UL
#define SABRE_FFBCFG 0xf000UL
#define SABRE_FFBCFG_SPRQS 0x000000000f000000 /* Slave P_RQST queue size */
#define SABRE_FFBCFG_ONEREAD 0x0000000000004000 /* Slave supports one outstanding read */
#define SABRE_MCCTRL0 0xf010UL
#define SABRE_MCCTRL0_RENAB 0x0000000080000000 /* Refresh Enable */
#define SABRE_MCCTRL0_EENAB 0x0000000010000000 /* Enable all ECC functions */
#define SABRE_MCCTRL0_11BIT 0x0000000000001000 /* Enable 11-bit column addressing */
#define SABRE_MCCTRL0_DPP 0x0000000000000f00 /* DIMM Pair Present Bits */
#define SABRE_MCCTRL0_RINTVL 0x00000000000000ff /* Refresh Interval */
#define SABRE_MCCTRL1 0xf018UL
#define SABRE_MCCTRL1_AMDC 0x0000000038000000 /* Advance Memdata Clock */
#define SABRE_MCCTRL1_ARDC 0x0000000007000000 /* Advance DRAM Read Data Clock */
#define SABRE_MCCTRL1_CSR 0x0000000000e00000 /* CAS to RAS delay for CBR refresh */
#define SABRE_MCCTRL1_CASRW 0x00000000001c0000 /* CAS length for read/write */
#define SABRE_MCCTRL1_RCD 0x0000000000038000 /* RAS to CAS delay */
#define SABRE_MCCTRL1_CP 0x0000000000007000 /* CAS Precharge */
#define SABRE_MCCTRL1_RP 0x0000000000000e00 /* RAS Precharge */
#define SABRE_MCCTRL1_RAS 0x00000000000001c0 /* Length of RAS for refresh */
#define SABRE_MCCTRL1_CASRW2 0x0000000000000038 /* Must be same as CASRW */
#define SABRE_MCCTRL1_RSC 0x0000000000000007 /* RAS after CAS hold time */
#define SABRE_RESETCTRL 0xf020UL
#define SABRE_CONFIGSPACE 0x001000000UL
#define SABRE_IOSPACE 0x002000000UL
#define SABRE_IOSPACE_SIZE 0x000ffffffUL
#define SABRE_MEMSPACE 0x100000000UL
#define SABRE_MEMSPACE_SIZE 0x07fffffffUL
static int hummingbird_p;
static struct pci_bus *sabre_root_bus;
[PATCH] sparc64 pt_regs fixes Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-08 12:23:28 +00:00
static irqreturn_t sabre_ue_intr(int irq, void *dev_id)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
[SPARC64]: Move index info pci_pbm_info. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-08 06:49:01 +00:00
struct pci_pbm_info *pbm = dev_id;
unsigned long afsr_reg = pbm->controller_regs + SABRE_UE_AFSR;
unsigned long afar_reg = pbm->controller_regs + SABRE_UECE_AFAR;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
unsigned long afsr, afar, error_bits;
int reported;
/* Latch uncorrectable error status. */
sparc64: Kill hand-crafted I/O accessors in PCI controller drivers. Use existing upa_{read,write}q() interfaces instead. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-10 11:13:10 +00:00
afar = upa_readq(afar_reg);
afsr = upa_readq(afsr_reg);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/* Clear the primary/secondary error status bits. */
error_bits = afsr &
(SABRE_UEAFSR_PDRD | SABRE_UEAFSR_PDWR |
SABRE_UEAFSR_SDRD | SABRE_UEAFSR_SDWR |
SABRE_UEAFSR_SDTE | SABRE_UEAFSR_PDTE);
if (!error_bits)
return IRQ_NONE;
sparc64: Kill hand-crafted I/O accessors in PCI controller drivers. Use existing upa_{read,write}q() interfaces instead. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-10 11:13:10 +00:00
upa_writeq(error_bits, afsr_reg);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/* Log the error. */
[SPARC64]: Move index info pci_pbm_info. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-08 06:49:01 +00:00
printk("%s: Uncorrectable Error, primary error type[%s%s]\n",
pbm->name,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
((error_bits & SABRE_UEAFSR_PDRD) ?
"DMA Read" :
((error_bits & SABRE_UEAFSR_PDWR) ?
"DMA Write" : "???")),
((error_bits & SABRE_UEAFSR_PDTE) ?
":Translation Error" : ""));
[SPARC64]: Move index info pci_pbm_info. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-08 06:49:01 +00:00
printk("%s: bytemask[%04lx] dword_offset[%lx] was_block(%d)\n",
pbm->name,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
(afsr & SABRE_UEAFSR_BMSK) >> 32UL,
(afsr & SABRE_UEAFSR_OFF) >> 29UL,
((afsr & SABRE_UEAFSR_BLK) ? 1 : 0));
[SPARC64]: Move index info pci_pbm_info. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-08 06:49:01 +00:00
printk("%s: UE AFAR [%016lx]\n", pbm->name, afar);
printk("%s: UE Secondary errors [", pbm->name);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
reported = 0;
if (afsr & SABRE_UEAFSR_SDRD) {
reported++;
printk("(DMA Read)");
}
if (afsr & SABRE_UEAFSR_SDWR) {
reported++;
printk("(DMA Write)");
}
if (afsr & SABRE_UEAFSR_SDTE) {
reported++;
printk("(Translation Error)");
}
if (!reported)
printk("(none)");
printk("]\n");
/* Interrogate IOMMU for error status. */
sparc64: Commonize large portions of PSYCHO error handling. The IOMMU and streaming cache error interrogation is moved here as well as the PCI error interrupt handler. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-10 10:52:51 +00:00
psycho_check_iommu_error(pbm, afsr, afar, UE_ERR);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
return IRQ_HANDLED;
}
[PATCH] sparc64 pt_regs fixes Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-08 12:23:28 +00:00
static irqreturn_t sabre_ce_intr(int irq, void *dev_id)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
[SPARC64]: Move index info pci_pbm_info. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-08 06:49:01 +00:00
struct pci_pbm_info *pbm = dev_id;
unsigned long afsr_reg = pbm->controller_regs + SABRE_CE_AFSR;
unsigned long afar_reg = pbm->controller_regs + SABRE_UECE_AFAR;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
unsigned long afsr, afar, error_bits;
int reported;
/* Latch error status. */
sparc64: Kill hand-crafted I/O accessors in PCI controller drivers. Use existing upa_{read,write}q() interfaces instead. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-10 11:13:10 +00:00
afar = upa_readq(afar_reg);
afsr = upa_readq(afsr_reg);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/* Clear primary/secondary error status bits. */
error_bits = afsr &
(SABRE_CEAFSR_PDRD | SABRE_CEAFSR_PDWR |
SABRE_CEAFSR_SDRD | SABRE_CEAFSR_SDWR);
if (!error_bits)
return IRQ_NONE;
sparc64: Kill hand-crafted I/O accessors in PCI controller drivers. Use existing upa_{read,write}q() interfaces instead. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-10 11:13:10 +00:00
upa_writeq(error_bits, afsr_reg);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/* Log the error. */
[SPARC64]: Move index info pci_pbm_info. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-08 06:49:01 +00:00
printk("%s: Correctable Error, primary error type[%s]\n",
pbm->name,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
((error_bits & SABRE_CEAFSR_PDRD) ?
"DMA Read" :
((error_bits & SABRE_CEAFSR_PDWR) ?
"DMA Write" : "???")));
/* XXX Use syndrome and afar to print out module string just like
* XXX UDB CE trap handler does... -DaveM
*/
[SPARC64]: Move index info pci_pbm_info. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-08 06:49:01 +00:00
printk("%s: syndrome[%02lx] bytemask[%04lx] dword_offset[%lx] "
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
"was_block(%d)\n",
[SPARC64]: Move index info pci_pbm_info. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-08 06:49:01 +00:00
pbm->name,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
(afsr & SABRE_CEAFSR_ESYND) >> 48UL,
(afsr & SABRE_CEAFSR_BMSK) >> 32UL,
(afsr & SABRE_CEAFSR_OFF) >> 29UL,
((afsr & SABRE_CEAFSR_BLK) ? 1 : 0));
[SPARC64]: Move index info pci_pbm_info. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-08 06:49:01 +00:00
printk("%s: CE AFAR [%016lx]\n", pbm->name, afar);
printk("%s: CE Secondary errors [", pbm->name);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
reported = 0;
if (afsr & SABRE_CEAFSR_SDRD) {
reported++;
printk("(DMA Read)");
}
if (afsr & SABRE_CEAFSR_SDWR) {
reported++;
printk("(DMA Write)");
}
if (!reported)
printk("(none)");
printk("]\n");
return IRQ_HANDLED;
}
[SPARC64] PCI: Use root list of pbm's instead of pci_controller_info's The idea is to move more and more things into the pbm, with the eventual goal of eliminating the pci_controller_info entirely as there really isn't any need for it. This stage of the transformations requires some reworking of the PCI error interrupt handling. It might be tricky to get rid of the pci_controller_info parenting for a few reasons: 1) When we get an uncorrectable or correctable error we want to interrogate the IOMMU and streaming cache of both PBMs for error status. These errors come from the UPA front-end which is shared between the two PBM PCI bus segments. Historically speaking this is why I choose the datastructure hierarchy of pci_controller_info-->pci_pbm_info 2) The probing does a portid/devhandle match to look for the 'other' pbm, but this is entirely an artifact and can be eliminated trivially. What we could do to solve #1 is to have a "buddy" pointer from one pbm to another. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-08 06:06:27 +00:00
static void sabre_register_error_handlers(struct pci_pbm_info *pbm)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
of: Always use 'struct device.of_node' to get device node pointer. The following structure elements duplicate the information in 'struct device.of_node' and so are being eliminated. This patch makes all readers of these elements use device.of_node instead. (struct of_device *)->node (struct dev_archdata *)->prom_node (sparc) (struct dev_archdata *)->of_node (powerpc & microblaze) Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-04-13 23:12:29 +00:00
struct device_node *dp = pbm->op->dev.of_node;
sparc: remove references to of_device and to_of_device of_device is just a #define alias to platform_device. This patch replaces all references to it with platform_device. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: David S. Miller <davem@davemloft.net>
2010-07-22 22:04:30 +00:00
struct platform_device *op;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
unsigned long base = pbm->controller_regs;
u64 tmp;
[SPARC64]: Fix request_irq() ignored result warnings in PCI controller code. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-09 00:23:31 +00:00
int err;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
[SPARC64]: of_device layer IRQ resolution Do IRQ determination generically by parsing the PROM properties, and using IRQ controller drivers for final resolution. One immediate positive effect is that all of the IRQ frobbing in the EBUS, ISA, and PCI controller layers has been eliminated. We just look up the of_device and use the properly computed value. The PCI controller irq_build() routines are gone and no longer used. Unfortunately sbus_build_irq() has to remain as there is a direct reference to this in the sunzilog driver. That can be killed off once the sparc32 side of this is written and the sunzilog driver is transformed into an "of" bus driver. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-29 22:07:37 +00:00
if (pbm->chip_type == PBM_CHIP_TYPE_SABRE)
dp = dp->parent;
op = of_find_device_by_node(dp);
if (!op)
return;
/* Sabre/Hummingbird IRQ property layout is:
* 0: PCI ERR
* 1: UE ERR
* 2: CE ERR
* 3: POWER FAIL
*/
sparc/of: Move of_device fields into struct pdev_archdata This patch moves SPARC architecture specific data members out of struct of_device and into the pdev_archdata structure. The reason for this change is to unify the struct of_device definition amongst all the architectures. It also remvoes the .sysdata, .slot, .portid and .clock_freq properties because they aren't actually used by anything. A subsequent patch will replace struct of_device entirely with struct platform_device and the of_platform support code will share common routines with the platform bus (but the bus instances themselves can remain separate). This patch also adds 'struct resources *resource' and num_resources to match the fields defined in struct platform_device. After this change, 'struct platform_device' can be used as a drop-in replacement for 'struct of_platform'. This change is in preparation for merging the of_platform_bus_type with the platform_bus_type. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: David S. Miller <davem@davemloft.net> Cc: Stephen Rothwell <sfr@canb.auug.org.au>
2010-06-18 17:09:58 +00:00
if (op->archdata.num_irqs < 4)
[SPARC64]: of_device layer IRQ resolution Do IRQ determination generically by parsing the PROM properties, and using IRQ controller drivers for final resolution. One immediate positive effect is that all of the IRQ frobbing in the EBUS, ISA, and PCI controller layers has been eliminated. We just look up the of_device and use the properly computed value. The PCI controller irq_build() routines are gone and no longer used. Unfortunately sbus_build_irq() has to remain as there is a direct reference to this in the sunzilog driver. That can be killed off once the sparc32 side of this is written and the sunzilog driver is transformed into an "of" bus driver. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-29 22:07:37 +00:00
return;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/* We clear the error bits in the appropriate AFSR before
* registering the handler so that we don't get spurious
* interrupts.
*/
sparc64: Kill hand-crafted I/O accessors in PCI controller drivers. Use existing upa_{read,write}q() interfaces instead. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-10 11:13:10 +00:00
upa_writeq((SABRE_UEAFSR_PDRD | SABRE_UEAFSR_PDWR |
SABRE_UEAFSR_SDRD | SABRE_UEAFSR_SDWR |
SABRE_UEAFSR_SDTE | SABRE_UEAFSR_PDTE),
base + SABRE_UE_AFSR);
[SPARC64]: of_device layer IRQ resolution Do IRQ determination generically by parsing the PROM properties, and using IRQ controller drivers for final resolution. One immediate positive effect is that all of the IRQ frobbing in the EBUS, ISA, and PCI controller layers has been eliminated. We just look up the of_device and use the properly computed value. The PCI controller irq_build() routines are gone and no longer used. Unfortunately sbus_build_irq() has to remain as there is a direct reference to this in the sunzilog driver. That can be killed off once the sparc32 side of this is written and the sunzilog driver is transformed into an "of" bus driver. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-29 22:07:37 +00:00
sparc/of: Move of_device fields into struct pdev_archdata This patch moves SPARC architecture specific data members out of struct of_device and into the pdev_archdata structure. The reason for this change is to unify the struct of_device definition amongst all the architectures. It also remvoes the .sysdata, .slot, .portid and .clock_freq properties because they aren't actually used by anything. A subsequent patch will replace struct of_device entirely with struct platform_device and the of_platform support code will share common routines with the platform bus (but the bus instances themselves can remain separate). This patch also adds 'struct resources *resource' and num_resources to match the fields defined in struct platform_device. After this change, 'struct platform_device' can be used as a drop-in replacement for 'struct of_platform'. This change is in preparation for merging the of_platform_bus_type with the platform_bus_type. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: David S. Miller <davem@davemloft.net> Cc: Stephen Rothwell <sfr@canb.auug.org.au>
2010-06-18 17:09:58 +00:00
err = request_irq(op->archdata.irqs[1], sabre_ue_intr, 0, "SABRE_UE", pbm);
[SPARC64]: Fix request_irq() ignored result warnings in PCI controller code. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-09 00:23:31 +00:00
if (err)
printk(KERN_WARNING "%s: Couldn't register UE, err=%d.\n",
pbm->name, err);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
sparc64: Kill hand-crafted I/O accessors in PCI controller drivers. Use existing upa_{read,write}q() interfaces instead. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-10 11:13:10 +00:00
upa_writeq((SABRE_CEAFSR_PDRD | SABRE_CEAFSR_PDWR |
SABRE_CEAFSR_SDRD | SABRE_CEAFSR_SDWR),
base + SABRE_CE_AFSR);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
sparc/of: Move of_device fields into struct pdev_archdata This patch moves SPARC architecture specific data members out of struct of_device and into the pdev_archdata structure. The reason for this change is to unify the struct of_device definition amongst all the architectures. It also remvoes the .sysdata, .slot, .portid and .clock_freq properties because they aren't actually used by anything. A subsequent patch will replace struct of_device entirely with struct platform_device and the of_platform support code will share common routines with the platform bus (but the bus instances themselves can remain separate). This patch also adds 'struct resources *resource' and num_resources to match the fields defined in struct platform_device. After this change, 'struct platform_device' can be used as a drop-in replacement for 'struct of_platform'. This change is in preparation for merging the of_platform_bus_type with the platform_bus_type. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: David S. Miller <davem@davemloft.net> Cc: Stephen Rothwell <sfr@canb.auug.org.au>
2010-06-18 17:09:58 +00:00
err = request_irq(op->archdata.irqs[2], sabre_ce_intr, 0, "SABRE_CE", pbm);
[SPARC64]: Fix request_irq() ignored result warnings in PCI controller code. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-09 00:23:31 +00:00
if (err)
printk(KERN_WARNING "%s: Couldn't register CE, err=%d.\n",
pbm->name, err);
sparc/of: Move of_device fields into struct pdev_archdata This patch moves SPARC architecture specific data members out of struct of_device and into the pdev_archdata structure. The reason for this change is to unify the struct of_device definition amongst all the architectures. It also remvoes the .sysdata, .slot, .portid and .clock_freq properties because they aren't actually used by anything. A subsequent patch will replace struct of_device entirely with struct platform_device and the of_platform support code will share common routines with the platform bus (but the bus instances themselves can remain separate). This patch also adds 'struct resources *resource' and num_resources to match the fields defined in struct platform_device. After this change, 'struct platform_device' can be used as a drop-in replacement for 'struct of_platform'. This change is in preparation for merging the of_platform_bus_type with the platform_bus_type. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: David S. Miller <davem@davemloft.net> Cc: Stephen Rothwell <sfr@canb.auug.org.au>
2010-06-18 17:09:58 +00:00
err = request_irq(op->archdata.irqs[0], psycho_pcierr_intr, 0,
[SPARC64]: Fix request_irq() ignored result warnings in PCI controller code. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-09 00:23:31 +00:00
"SABRE_PCIERR", pbm);
if (err)
printk(KERN_WARNING "%s: Couldn't register PCIERR, err=%d.\n",
pbm->name, err);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
sparc64: Kill hand-crafted I/O accessors in PCI controller drivers. Use existing upa_{read,write}q() interfaces instead. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-10 11:13:10 +00:00
tmp = upa_readq(base + SABRE_PCICTRL);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
tmp |= SABRE_PCICTRL_ERREN;
sparc64: Kill hand-crafted I/O accessors in PCI controller drivers. Use existing upa_{read,write}q() interfaces instead. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-10 11:13:10 +00:00
upa_writeq(tmp, base + SABRE_PCICTRL);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
[SPARC64] PCI: Use root list of pbm's instead of pci_controller_info's The idea is to move more and more things into the pbm, with the eventual goal of eliminating the pci_controller_info entirely as there really isn't any need for it. This stage of the transformations requires some reworking of the PCI error interrupt handling. It might be tricky to get rid of the pci_controller_info parenting for a few reasons: 1) When we get an uncorrectable or correctable error we want to interrogate the IOMMU and streaming cache of both PBMs for error status. These errors come from the UPA front-end which is shared between the two PBM PCI bus segments. Historically speaking this is why I choose the datastructure hierarchy of pci_controller_info-->pci_pbm_info 2) The probing does a portid/devhandle match to look for the 'other' pbm, but this is entirely an artifact and can be eliminated trivially. What we could do to solve #1 is to have a "buddy" pointer from one pbm to another. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-08 06:06:27 +00:00
static void apb_init(struct pci_bus *sabre_bus)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
struct pci_dev *pdev;
list_for_each_entry(pdev, &sabre_bus->devices, bus_list) {
if (pdev->vendor == PCI_VENDOR_ID_SUN &&
pdev->device == PCI_DEVICE_ID_SUN_SIMBA) {
u16 word16;
[SPARC64]: Fix sabre pci controllers with new probing scheme. The SIMBA APB bridge is strange, it is a PCI bridge but it lacks some standard OF properties, in particular it lacks a 'ranges' property. What you have to do is read the IO and MEM range registers in the APB bridge to determine the ranges handled by each bridge. So fill in the bus resources by doing that. Since we now handle this quirk in the generic PCI and OF device probing layers, we can flat out eliminate all of that code from the sabre pci controller driver. In fact we can thus eliminate completely another quirk of the sabre driver. It tried to make the two APB bridges look like PBMs but that makes zero sense now (and it's questionable whether it ever made sense). So now just use pbm_A and probe the whole PCI hierarchy using that as the root. This simplification allows many future cleanups to occur. Also, I've found yet another quirk that needs to be worked around while testing this. You can't use the 'class-code' OF firmware property, especially for IDE controllers. We have to read the value out of PCI config space or else we'll see the value the device was showing before it was programmed into native mode. I'm starting to think it might be wise to just read all of the values out of PCI config space instead of using the OF properties. :-/ Signed-off-by: David S. Miller <davem@davemloft.net>
2007-03-04 20:53:19 +00:00
pci_read_config_word(pdev, PCI_COMMAND, &word16);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
word16 |= PCI_COMMAND_SERR | PCI_COMMAND_PARITY |
PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY |
PCI_COMMAND_IO;
[SPARC64]: Fix sabre pci controllers with new probing scheme. The SIMBA APB bridge is strange, it is a PCI bridge but it lacks some standard OF properties, in particular it lacks a 'ranges' property. What you have to do is read the IO and MEM range registers in the APB bridge to determine the ranges handled by each bridge. So fill in the bus resources by doing that. Since we now handle this quirk in the generic PCI and OF device probing layers, we can flat out eliminate all of that code from the sabre pci controller driver. In fact we can thus eliminate completely another quirk of the sabre driver. It tried to make the two APB bridges look like PBMs but that makes zero sense now (and it's questionable whether it ever made sense). So now just use pbm_A and probe the whole PCI hierarchy using that as the root. This simplification allows many future cleanups to occur. Also, I've found yet another quirk that needs to be worked around while testing this. You can't use the 'class-code' OF firmware property, especially for IDE controllers. We have to read the value out of PCI config space or else we'll see the value the device was showing before it was programmed into native mode. I'm starting to think it might be wise to just read all of the values out of PCI config space instead of using the OF properties. :-/ Signed-off-by: David S. Miller <davem@davemloft.net>
2007-03-04 20:53:19 +00:00
pci_write_config_word(pdev, PCI_COMMAND, word16);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/* Status register bits are "write 1 to clear". */
[SPARC64]: Fix sabre pci controllers with new probing scheme. The SIMBA APB bridge is strange, it is a PCI bridge but it lacks some standard OF properties, in particular it lacks a 'ranges' property. What you have to do is read the IO and MEM range registers in the APB bridge to determine the ranges handled by each bridge. So fill in the bus resources by doing that. Since we now handle this quirk in the generic PCI and OF device probing layers, we can flat out eliminate all of that code from the sabre pci controller driver. In fact we can thus eliminate completely another quirk of the sabre driver. It tried to make the two APB bridges look like PBMs but that makes zero sense now (and it's questionable whether it ever made sense). So now just use pbm_A and probe the whole PCI hierarchy using that as the root. This simplification allows many future cleanups to occur. Also, I've found yet another quirk that needs to be worked around while testing this. You can't use the 'class-code' OF firmware property, especially for IDE controllers. We have to read the value out of PCI config space or else we'll see the value the device was showing before it was programmed into native mode. I'm starting to think it might be wise to just read all of the values out of PCI config space instead of using the OF properties. :-/ Signed-off-by: David S. Miller <davem@davemloft.net>
2007-03-04 20:53:19 +00:00
pci_write_config_word(pdev, PCI_STATUS, 0xffff);
pci_write_config_word(pdev, PCI_SEC_STATUS, 0xffff);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/* Use a primary/seconday latency timer value
* of 64.
*/
[SPARC64]: Fix sabre pci controllers with new probing scheme. The SIMBA APB bridge is strange, it is a PCI bridge but it lacks some standard OF properties, in particular it lacks a 'ranges' property. What you have to do is read the IO and MEM range registers in the APB bridge to determine the ranges handled by each bridge. So fill in the bus resources by doing that. Since we now handle this quirk in the generic PCI and OF device probing layers, we can flat out eliminate all of that code from the sabre pci controller driver. In fact we can thus eliminate completely another quirk of the sabre driver. It tried to make the two APB bridges look like PBMs but that makes zero sense now (and it's questionable whether it ever made sense). So now just use pbm_A and probe the whole PCI hierarchy using that as the root. This simplification allows many future cleanups to occur. Also, I've found yet another quirk that needs to be worked around while testing this. You can't use the 'class-code' OF firmware property, especially for IDE controllers. We have to read the value out of PCI config space or else we'll see the value the device was showing before it was programmed into native mode. I'm starting to think it might be wise to just read all of the values out of PCI config space instead of using the OF properties. :-/ Signed-off-by: David S. Miller <davem@davemloft.net>
2007-03-04 20:53:19 +00:00
pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 64);
pci_write_config_byte(pdev, PCI_SEC_LATENCY_TIMER, 64);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/* Enable reporting/forwarding of master aborts,
* parity, and SERR.
*/
[SPARC64]: Fix sabre pci controllers with new probing scheme. The SIMBA APB bridge is strange, it is a PCI bridge but it lacks some standard OF properties, in particular it lacks a 'ranges' property. What you have to do is read the IO and MEM range registers in the APB bridge to determine the ranges handled by each bridge. So fill in the bus resources by doing that. Since we now handle this quirk in the generic PCI and OF device probing layers, we can flat out eliminate all of that code from the sabre pci controller driver. In fact we can thus eliminate completely another quirk of the sabre driver. It tried to make the two APB bridges look like PBMs but that makes zero sense now (and it's questionable whether it ever made sense). So now just use pbm_A and probe the whole PCI hierarchy using that as the root. This simplification allows many future cleanups to occur. Also, I've found yet another quirk that needs to be worked around while testing this. You can't use the 'class-code' OF firmware property, especially for IDE controllers. We have to read the value out of PCI config space or else we'll see the value the device was showing before it was programmed into native mode. I'm starting to think it might be wise to just read all of the values out of PCI config space instead of using the OF properties. :-/ Signed-off-by: David S. Miller <davem@davemloft.net>
2007-03-04 20:53:19 +00:00
pci_write_config_byte(pdev, PCI_BRIDGE_CONTROL,
(PCI_BRIDGE_CTL_PARITY |
PCI_BRIDGE_CTL_SERR |
PCI_BRIDGE_CTL_MASTER_ABORT));
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
}
}
sparc: remove __devinit, __devexit annotations __devinit, __devexit annotations are nops - so drop them. Likewise for __devexit_p. Adjusted alignment of arguments when needed. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-01 15:02:33 +00:00
static void sabre_scan_bus(struct pci_pbm_info *pbm, struct device *parent)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
static int once;
/* The APB bridge speaks to the Sabre host PCI bridge
* at 66Mhz, but the front side of APB runs at 33Mhz
* for both segments.
[SPARC64]: Fix 2 bugs in PCI Sabre bus scanning. If we are on hummingbird, bus runs at 66MHZ. pbm->pci_bus should be setup with the result of pci_scan_one_pbm() or else we deref NULL pointers in the error interrupt handlers. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-06-06 21:03:08 +00:00
*
* Hummingbird systems do not use APB, so they run
* at 66MHZ.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
*/
[SPARC64]: Fix 2 bugs in PCI Sabre bus scanning. If we are on hummingbird, bus runs at 66MHZ. pbm->pci_bus should be setup with the result of pci_scan_one_pbm() or else we deref NULL pointers in the error interrupt handlers. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-06-06 21:03:08 +00:00
if (hummingbird_p)
pbm->is_66mhz_capable = 1;
else
pbm->is_66mhz_capable = 0;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/* This driver has not been verified to handle
* multiple SABREs yet, so trap this.
*
* Also note that the SABRE host bridge is hardwired
* to live at bus 0.
*/
if (once != 0) {
sparc64: Convert SABRE PCI controller driver into a real driver. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-30 10:14:01 +00:00
printk(KERN_ERR PFX "Multiple controllers unsupported.\n");
return;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
once++;
sparc64: Pass proper parent device down into root pci_create_bus() call. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-02 01:32:22 +00:00
pbm->pci_bus = pci_scan_one_pbm(pbm, parent);
[SPARC64]: Fix 2 bugs in PCI Sabre bus scanning. If we are on hummingbird, bus runs at 66MHZ. pbm->pci_bus should be setup with the result of pci_scan_one_pbm() or else we deref NULL pointers in the error interrupt handlers. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-06-06 21:03:08 +00:00
if (!pbm->pci_bus)
[SPARC64]: Probe PCI bus using OF device tree. Almost entirely taken from the 64-bit PowerPC PCI code. This allowed to eliminate a ton of cruft from the sparc64 PCI layer. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-03-01 07:35:04 +00:00
return;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
[SPARC64]: Fix 2 bugs in PCI Sabre bus scanning. If we are on hummingbird, bus runs at 66MHZ. pbm->pci_bus should be setup with the result of pci_scan_one_pbm() or else we deref NULL pointers in the error interrupt handlers. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-06-06 21:03:08 +00:00
sabre_root_bus = pbm->pci_bus;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
[SPARC64]: Fix 2 bugs in PCI Sabre bus scanning. If we are on hummingbird, bus runs at 66MHZ. pbm->pci_bus should be setup with the result of pci_scan_one_pbm() or else we deref NULL pointers in the error interrupt handlers. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-06-06 21:03:08 +00:00
apb_init(pbm->pci_bus);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
[SPARC64] PCI: Use root list of pbm's instead of pci_controller_info's The idea is to move more and more things into the pbm, with the eventual goal of eliminating the pci_controller_info entirely as there really isn't any need for it. This stage of the transformations requires some reworking of the PCI error interrupt handling. It might be tricky to get rid of the pci_controller_info parenting for a few reasons: 1) When we get an uncorrectable or correctable error we want to interrogate the IOMMU and streaming cache of both PBMs for error status. These errors come from the UPA front-end which is shared between the two PBM PCI bus segments. Historically speaking this is why I choose the datastructure hierarchy of pci_controller_info-->pci_pbm_info 2) The probing does a portid/devhandle match to look for the 'other' pbm, but this is entirely an artifact and can be eliminated trivially. What we could do to solve #1 is to have a "buddy" pointer from one pbm to another. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-08 06:06:27 +00:00
sabre_register_error_handlers(pbm);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
sparc: remove __devinit, __devexit annotations __devinit, __devexit annotations are nops - so drop them. Likewise for __devexit_p. Adjusted alignment of arguments when needed. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-01 15:02:33 +00:00
static void sabre_pbm_init(struct pci_pbm_info *pbm,
struct platform_device *op)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
sparc64: Create and use psycho_pbm_init_common(). Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-10 10:15:56 +00:00
psycho_pbm_init_common(pbm, op, "SABRE", PBM_CHIP_TYPE_SABRE);
sparc64: Commonize large portions of PSYCHO error handling. The IOMMU and streaming cache error interrogation is moved here as well as the PCI error interrupt handler. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-10 10:52:51 +00:00
pbm->pci_afsr = pbm->controller_regs + SABRE_PIOAFSR;
pbm->pci_afar = pbm->controller_regs + SABRE_PIOAFAR;
pbm->pci_csr = pbm->controller_regs + SABRE_PCICTRL;
sparc64: Pass proper parent device down into root pci_create_bus() call. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-02 01:32:22 +00:00
sabre_scan_bus(pbm, &op->dev);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
drivercore: revert addition of of_match to struct device Commit b826291c, "drivercore/dt: add a match table pointer to struct device" added an of_match pointer to struct device to cache the of_match_table entry discovered at driver match time. This was unsafe because matching is not an atomic operation with probing a driver. If two or more drivers are attempted to be matched to a driver at the same time, then the cached matching entry pointer could get overwritten. This patch reverts the of_match cache pointer and reworks all users to call of_match_device() directly instead. Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-05-18 17:19:24 +00:00
static const struct of_device_id sabre_match[];
sparc: remove __devinit, __devexit annotations __devinit, __devexit annotations are nops - so drop them. Likewise for __devexit_p. Adjusted alignment of arguments when needed. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-01 15:02:33 +00:00
static int sabre_probe(struct platform_device *op)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
drivercore: revert addition of of_match to struct device Commit b826291c, "drivercore/dt: add a match table pointer to struct device" added an of_match pointer to struct device to cache the of_match_table entry discovered at driver match time. This was unsafe because matching is not an atomic operation with probing a driver. If two or more drivers are attempted to be matched to a driver at the same time, then the cached matching entry pointer could get overwritten. This patch reverts the of_match cache pointer and reworks all users to call of_match_device() directly instead. Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-05-18 17:19:24 +00:00
const struct of_device_id *match;
[SPARC64]: Fix PCI rework to adhere to of_get_property() const return. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-03-29 08:50:16 +00:00
const struct linux_prom64_registers *pr_regs;
of: Always use 'struct device.of_node' to get device node pointer. The following structure elements duplicate the information in 'struct device.of_node' and so are being eliminated. This patch makes all readers of these elements use device.of_node instead. (struct of_device *)->node (struct dev_archdata *)->prom_node (sparc) (struct dev_archdata *)->of_node (powerpc & microblaze) Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-04-13 23:12:29 +00:00
struct device_node *dp = op->dev.of_node;
[SPARC64]: Removal of trivial pci_controller_info uses. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-08 07:19:02 +00:00
struct pci_pbm_info *pbm;
sparc64: Convert SABRE PCI controller driver into a real driver. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-30 10:14:01 +00:00
u32 upa_portid, dma_mask;
[SPARC64]: Convert PCI over to generic struct iommu/strbuf. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-27 04:08:21 +00:00
struct iommu *iommu;
sparc64: Convert SABRE PCI controller driver into a real driver. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-30 10:14:01 +00:00
int tsbsize, err;
[SPARC64]: Fix PCI rework to adhere to of_get_property() const return. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-03-29 08:50:16 +00:00
const u32 *vdma;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
u64 clear_irq;
drivercore: revert addition of of_match to struct device Commit b826291c, "drivercore/dt: add a match table pointer to struct device" added an of_match pointer to struct device to cache the of_match_table entry discovered at driver match time. This was unsafe because matching is not an atomic operation with probing a driver. If two or more drivers are attempted to be matched to a driver at the same time, then the cached matching entry pointer could get overwritten. This patch reverts the of_match cache pointer and reworks all users to call of_match_device() directly instead. Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-05-18 17:19:24 +00:00
match = of_match_device(sabre_match, &op->dev);
hummingbird_p = match && (match->data != NULL);
sparc64: Convert SABRE PCI controller driver into a real driver. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-30 10:14:01 +00:00
if (!hummingbird_p) {
struct device_node *cpu_dp;
/* Of course, Sun has to encode things a thousand
* different ways, inconsistently.
*/
for_each_node_by_type(cpu_dp, "cpu") {
sparc: Use of_node_name_eq for node name comparisons Convert string compares of DT node names to use of_node_name_eq helper instead. This removes direct access to the node name pointer. Cc: "David S. Miller" <davem@davemloft.net> Cc: sparclinux@vger.kernel.org Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-16 21:06:58 +00:00
if (of_node_name_eq(cpu_dp, "SUNW,UltraSPARC-IIe"))
sparc64: Convert SABRE PCI controller driver into a real driver. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-30 10:14:01 +00:00
hummingbird_p = 1;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
}
sparc64: Convert SABRE PCI controller driver into a real driver. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-30 10:14:01 +00:00
err = -ENOMEM;
sparc64: Get rid of pci_controller_info. It is just used as a parent to encapsulate two PBM objects. But that layout is only really relevant and necessary for psycho PCI controllers, which unlike all the others share a single IOMMU instance between sibling PCI busses. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-10 06:54:02 +00:00
pbm = kzalloc(sizeof(*pbm), GFP_KERNEL);
if (!pbm) {
printk(KERN_ERR PFX "Cannot allocate pci_pbm_info.\n");
sparc64: Simplify error handling in PCI controller probing. Based upon suggestions from Stephen Rothwell. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-31 08:33:52 +00:00
goto out_err;
sparc64: Convert SABRE PCI controller driver into a real driver. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-30 10:14:01 +00:00
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
sparc64: Get rid of pci_controller_info. It is just used as a parent to encapsulate two PBM objects. But that layout is only really relevant and necessary for psycho PCI controllers, which unlike all the others share a single IOMMU instance between sibling PCI busses. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-10 06:54:02 +00:00
iommu = kzalloc(sizeof(*iommu), GFP_KERNEL);
sparc64: Convert SABRE PCI controller driver into a real driver. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-30 10:14:01 +00:00
if (!iommu) {
printk(KERN_ERR PFX "Cannot allocate PBM iommu.\n");
sparc64: Simplify error handling in PCI controller probing. Based upon suggestions from Stephen Rothwell. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-31 08:33:52 +00:00
goto out_free_controller;
sparc64: Convert SABRE PCI controller driver into a real driver. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-30 10:14:01 +00:00
}
[SPARC64]: Removal of trivial pci_controller_info uses. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-08 07:19:02 +00:00
pbm->iommu = iommu;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
[SPARC64]: Fix sabre pci controllers with new probing scheme. The SIMBA APB bridge is strange, it is a PCI bridge but it lacks some standard OF properties, in particular it lacks a 'ranges' property. What you have to do is read the IO and MEM range registers in the APB bridge to determine the ranges handled by each bridge. So fill in the bus resources by doing that. Since we now handle this quirk in the generic PCI and OF device probing layers, we can flat out eliminate all of that code from the sabre pci controller driver. In fact we can thus eliminate completely another quirk of the sabre driver. It tried to make the two APB bridges look like PBMs but that makes zero sense now (and it's questionable whether it ever made sense). So now just use pbm_A and probe the whole PCI hierarchy using that as the root. This simplification allows many future cleanups to occur. Also, I've found yet another quirk that needs to be worked around while testing this. You can't use the 'class-code' OF firmware property, especially for IDE controllers. We have to read the value out of PCI config space or else we'll see the value the device was showing before it was programmed into native mode. I'm starting to think it might be wise to just read all of the values out of PCI config space instead of using the OF properties. :-/ Signed-off-by: David S. Miller <davem@davemloft.net>
2007-03-04 20:53:19 +00:00
upa_portid = of_getintprop_default(dp, "upa-portid", 0xff);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
[SPARC64]: Removal of trivial pci_controller_info uses. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-08 07:19:02 +00:00
pbm->portid = upa_portid;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/*
* Map in SABRE register set and report the presence of this SABRE.
*/
[SPARC64]: Use in-kernel OBP device tree for PCI controller probing. It can be pushed even further down, but this is a first step. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-22 01:18:47 +00:00
[SPARC64]: Fix sabre pci controllers with new probing scheme. The SIMBA APB bridge is strange, it is a PCI bridge but it lacks some standard OF properties, in particular it lacks a 'ranges' property. What you have to do is read the IO and MEM range registers in the APB bridge to determine the ranges handled by each bridge. So fill in the bus resources by doing that. Since we now handle this quirk in the generic PCI and OF device probing layers, we can flat out eliminate all of that code from the sabre pci controller driver. In fact we can thus eliminate completely another quirk of the sabre driver. It tried to make the two APB bridges look like PBMs but that makes zero sense now (and it's questionable whether it ever made sense). So now just use pbm_A and probe the whole PCI hierarchy using that as the root. This simplification allows many future cleanups to occur. Also, I've found yet another quirk that needs to be worked around while testing this. You can't use the 'class-code' OF firmware property, especially for IDE controllers. We have to read the value out of PCI config space or else we'll see the value the device was showing before it was programmed into native mode. I'm starting to think it might be wise to just read all of the values out of PCI config space instead of using the OF properties. :-/ Signed-off-by: David S. Miller <davem@davemloft.net>
2007-03-04 20:53:19 +00:00
pr_regs = of_get_property(dp, "reg", NULL);
sparc64: Convert SABRE PCI controller driver into a real driver. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-30 10:14:01 +00:00
err = -ENODEV;
if (!pr_regs) {
printk(KERN_ERR PFX "No reg property\n");
sparc64: Simplify error handling in PCI controller probing. Based upon suggestions from Stephen Rothwell. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-31 08:33:52 +00:00
goto out_free_iommu;
sparc64: Convert SABRE PCI controller driver into a real driver. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-30 10:14:01 +00:00
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/*
* First REG in property is base of entire SABRE register space.
*/
[SPARC64]: Removal of trivial pci_controller_info uses. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-08 07:19:02 +00:00
pbm->controller_regs = pr_regs[0].phys_addr;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/* Clear interrupts */
/* PCI first */
for (clear_irq = SABRE_ICLR_A_SLOT0; clear_irq < SABRE_ICLR_B_SLOT0 + 0x80; clear_irq += 8)
sparc64: Kill hand-crafted I/O accessors in PCI controller drivers. Use existing upa_{read,write}q() interfaces instead. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-10 11:13:10 +00:00
upa_writeq(0x0UL, pbm->controller_regs + clear_irq);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/* Then OBIO */
for (clear_irq = SABRE_ICLR_SCSI; clear_irq < SABRE_ICLR_SCSI + 0x80; clear_irq += 8)
sparc64: Kill hand-crafted I/O accessors in PCI controller drivers. Use existing upa_{read,write}q() interfaces instead. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-10 11:13:10 +00:00
upa_writeq(0x0UL, pbm->controller_regs + clear_irq);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/* Error interrupts are enabled later after the bus scan. */
sparc64: Kill hand-crafted I/O accessors in PCI controller drivers. Use existing upa_{read,write}q() interfaces instead. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-10 11:13:10 +00:00
upa_writeq((SABRE_PCICTRL_MRLEN | SABRE_PCICTRL_SERR |
SABRE_PCICTRL_ARBPARK | SABRE_PCICTRL_AEN),
pbm->controller_regs + SABRE_PCICTRL);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/* Now map in PCI config space for entire SABRE. */
sparc64: Get rid of pci_controller_info. It is just used as a parent to encapsulate two PBM objects. But that layout is only really relevant and necessary for psycho PCI controllers, which unlike all the others share a single IOMMU instance between sibling PCI busses. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-10 06:54:02 +00:00
pbm->config_space = pbm->controller_regs + SABRE_CONFIGSPACE;
[SPARC64]: Use in-kernel OBP device tree for PCI controller probing. It can be pushed even further down, but this is a first step. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-22 01:18:47 +00:00
[SPARC64]: Fix sabre pci controllers with new probing scheme. The SIMBA APB bridge is strange, it is a PCI bridge but it lacks some standard OF properties, in particular it lacks a 'ranges' property. What you have to do is read the IO and MEM range registers in the APB bridge to determine the ranges handled by each bridge. So fill in the bus resources by doing that. Since we now handle this quirk in the generic PCI and OF device probing layers, we can flat out eliminate all of that code from the sabre pci controller driver. In fact we can thus eliminate completely another quirk of the sabre driver. It tried to make the two APB bridges look like PBMs but that makes zero sense now (and it's questionable whether it ever made sense). So now just use pbm_A and probe the whole PCI hierarchy using that as the root. This simplification allows many future cleanups to occur. Also, I've found yet another quirk that needs to be worked around while testing this. You can't use the 'class-code' OF firmware property, especially for IDE controllers. We have to read the value out of PCI config space or else we'll see the value the device was showing before it was programmed into native mode. I'm starting to think it might be wise to just read all of the values out of PCI config space instead of using the OF properties. :-/ Signed-off-by: David S. Miller <davem@davemloft.net>
2007-03-04 20:53:19 +00:00
vdma = of_get_property(dp, "virtual-dma", NULL);
sparc64: Convert SABRE PCI controller driver into a real driver. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-30 10:14:01 +00:00
if (!vdma) {
printk(KERN_ERR PFX "No virtual-dma property\n");
sparc64: Simplify error handling in PCI controller probing. Based upon suggestions from Stephen Rothwell. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-31 08:33:52 +00:00
goto out_free_iommu;
sparc64: Convert SABRE PCI controller driver into a real driver. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-30 10:14:01 +00:00
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
dma_mask = vdma[0];
switch(vdma[1]) {
case 0x20000000:
dma_mask |= 0x1fffffff;
tsbsize = 64;
break;
case 0x40000000:
dma_mask |= 0x3fffffff;
tsbsize = 128;
break;
case 0x80000000:
dma_mask |= 0x7fffffff;
tsbsize = 128;
break;
default:
sparc64: Convert SABRE PCI controller driver into a real driver. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-30 10:14:01 +00:00
printk(KERN_ERR PFX "Strange virtual-dma size.\n");
sparc64: Simplify error handling in PCI controller probing. Based upon suggestions from Stephen Rothwell. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-31 08:33:52 +00:00
goto out_free_iommu;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
sparc64: Start commonizing code common between SABRE and PSYCHO. These are very similar chips, in fact they are identical in some macro blocks. So start commonizing code which they can share. We begin with the IOMMU initialization sequence. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-10 10:07:03 +00:00
err = psycho_iommu_init(pbm, tsbsize, vdma[0], dma_mask, SABRE_WRSYNC);
sparc64: Convert SABRE PCI controller driver into a real driver. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-30 10:14:01 +00:00
if (err)
sparc64: Simplify error handling in PCI controller probing. Based upon suggestions from Stephen Rothwell. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-31 08:33:52 +00:00
goto out_free_iommu;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/*
* Look for APB underneath.
*/
sparc64: Get rid of pci_controller_info. It is just used as a parent to encapsulate two PBM objects. But that layout is only really relevant and necessary for psycho PCI controllers, which unlike all the others share a single IOMMU instance between sibling PCI busses. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-10 06:54:02 +00:00
sabre_pbm_init(pbm, op);
pbm->next = pci_pbm_root;
pci_pbm_root = pbm;
dev_set_drvdata(&op->dev, pbm);
sparc64: Convert SABRE PCI controller driver into a real driver. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-30 10:14:01 +00:00
return 0;
[SPARC64]: Fix conflicts in SBUS/PCI/EBUS/ISA DMA handling. Fully unify all of the DMA ops so that subordinate bus types to the DMA operation providers (such as ebus, isa, of_device) can work transparently. Basically, we just make sure that for every system device we create, the dev->archdata 'iommu' and 'stc' fields are filled in. Then we have two platform variants of the DMA ops, one for SUN4U which actually programs the real hardware, and one for SUN4V which makes hypervisor calls. This also fixes the crashes in parport_pc on sparc64, reported by Meelis Roos. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-28 05:39:14 +00:00
sparc64: Simplify error handling in PCI controller probing. Based upon suggestions from Stephen Rothwell. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-31 08:33:52 +00:00
out_free_iommu:
sparc64: Get rid of pci_controller_info. It is just used as a parent to encapsulate two PBM objects. But that layout is only really relevant and necessary for psycho PCI controllers, which unlike all the others share a single IOMMU instance between sibling PCI busses. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-10 06:54:02 +00:00
kfree(pbm->iommu);
sparc64: Simplify error handling in PCI controller probing. Based upon suggestions from Stephen Rothwell. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-31 08:33:52 +00:00
out_free_controller:
sparc64: Get rid of pci_controller_info. It is just used as a parent to encapsulate two PBM objects. But that layout is only really relevant and necessary for psycho PCI controllers, which unlike all the others share a single IOMMU instance between sibling PCI busses. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-10 06:54:02 +00:00
kfree(pbm);
sparc64: Simplify error handling in PCI controller probing. Based upon suggestions from Stephen Rothwell. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-31 08:33:52 +00:00
out_err:
sparc64: Convert SABRE PCI controller driver into a real driver. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-30 10:14:01 +00:00
return err;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
sparc64: Convert SABRE PCI controller driver into a real driver. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-30 10:14:01 +00:00
sparc64: Fix section mis-match errors. Fix all of the problems spotted by CONFIG_DEBUG_SECTION_MISMATCH under arch/sparc during a 64-bit defconfig build. They fall into two categorites: 1) of_device_id is marked as __initdata, and we can never do this since these objects sit in the device core data structures way past boot. So even if a driver will never be reloaded, we have to keep the device ID table around. Mark such cases const instead. 2) The bootmem alloc/free handling code in mdesc.c was not fully marked __init as it should be, thus generating a reference to free_bootmem_late() (which is __init) from non-__init code. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-31 00:37:56 +00:00
static const struct of_device_id sabre_match[] = {
sparc64: Convert SABRE PCI controller driver into a real driver. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-30 10:14:01 +00:00
{
.name = "pci",
.compatible = "pci108e,a001",
.data = (void *) 1,
},
{
.name = "pci",
.compatible = "pci108e,a000",
},
{},
};
dt/sparc: Eliminate users of of_platform_{,un}register_driver Get rid of old users of of_platform_driver in arch/sparc. Most of_platform_driver users can be converted to use the platform_bus directly. Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-02-23 03:01:33 +00:00
static struct platform_driver sabre_driver = {
of: Remove duplicate fields from of_platform_driver .name, .match_table and .owner are duplicated in both of_platform_driver and device_driver. This patch is a removes the extra copies from struct of_platform_driver and converts all users to the device_driver members. This patch is a pretty mechanical change. The usage model doesn't change and if any drivers have been missed, or if anything has been fixed up incorrectly, then it will fail with a compile time error, and the fixup will be trivial. This patch looks big and scary because it touches so many files, but it should be pretty safe. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Sean MacLennan <smaclennan@pikatech.com>
2010-04-13 23:13:02 +00:00
.driver = {
.name = DRIVER_NAME,
.of_match_table = sabre_match,
},
sparc64: Convert SABRE PCI controller driver into a real driver. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-30 10:14:01 +00:00
.probe = sabre_probe,
};
static int __init sabre_init(void)
{
dt/sparc: Eliminate users of of_platform_{,un}register_driver Get rid of old users of of_platform_driver in arch/sparc. Most of_platform_driver users can be converted to use the platform_bus directly. Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-02-23 03:01:33 +00:00
return platform_driver_register(&sabre_driver);
sparc64: Convert SABRE PCI controller driver into a real driver. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-30 10:14:01 +00:00
}
subsys_initcall(sabre_init);
Reference in New Issue Copy Permalink